S10030 Quick Setup Guide

User Manual:

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadS10030-quick-setup-guide
Open PDF In BrowserView PDF
COLOR DIGITAL WIRELESS INDOOR/OUTDOOR
Accessory MOTION CAMERA
LW2301AC1 Series - quick start guide

Contents:

Before you install the camera, carefully plan where and how it will be
positioned, and where you will route the cable that connects the
camera to the power adaptor.

Digital Wireless Color Wireless Antenna
Camera with Stand
for camera

Installation Warnings
• Mount the camera indoors or outdoors. For outdoor
installation, mount it in a sheltered place where it is not
directly exposed to rain or snow.
• Aim the Cameras to best optimize the viewing area:
Select a location for the camera that provides a clear
view of the area you want to monitor, which is free from
dust, and is not in line-of-sight to a strong light source
or direct sunlight.
• Avoid installing the cameras where there are thick
walls, obstructions, or interference (i.e. transformers,
microwave ovens or other electrical equipment)
between the Cameras and the Receiver.
• Select a location for the camera that has an ambient
temperature between 14°F~122°F (-10°C~50°C)
• Before starting permanent installation, have another
person hold the camera for you while you verify its
performance by observing the image on a monitor.

CAMERA OVERVIEW

Mounting
Hardware kit

Power Adaptor
for camera*

Quick Start Guide
*May not be exactly as shown

INSTALLING THE CAMERA
1. Carefully unpack the Camera.
2. Mount the stand to the wall:
• Mark the position of the
screw holes on the wall.
• Drill holes and insert the
drywall plugs as needed.
• Firmly attach the stand
to the wall using the
provided screws.

NOTE: AVOID INSTALLING IN A
LOCATION WHICH REQUIRES
THE WIRELESS SIGNAL TO PASS
THROUGH CEMENT, CONCRETE
AND METAL STRUCTURES. THIS
WILL REDUCE THE
TRANSMISSION RANGE.

3. Attach the Antenna to the
Camera prior to mounting.

1. PIR Sensor: Passive IR motion sensor for more accurate
motion recording.
2. Microphone: Built-in microphone underneath camera body.
3. Lens: Camera lens.
4. Night Vision IR: Night vision IR LEDs used for viewing in
complete darkness.
5. Pair: Pairing button.
6. Antenna: Wireless antenna.
7. Power Cable: Connect the included power adapter to the
cable extending from the camera.

4. Place the camera in the
desired mounting position.
Tighten the thumbscrews
to secure the camera to the
Stand. Adjust the angle of
the camera until the
desired view is set.

www.lorextechnology.com

LW2301AC1 SERIES QSG_EN_R2 Page 1

COLOR DIGITAL WIRELESS INDOOR/OUTDOOR
Accessory MOTION CAMERA
LW2301AC1 Series - quick start guide

CONNECTING CAMERA POWER ADAPTOR
Connect one end of the camera Power Adaptor to the camera and the other end to an electrical outlet.

Connect power adaptor to
local 120V AC power outlet

ADDING THE ACCESSORY CAMERA TO YOUR SYSTEM
1. Press MENU on the wireless receiver or remote control.
2. From the Main Menu, select Pairing and press the
Enter button.
3. Select Camera 2, Camera 3 or Camera 4 and press the
Enter button.
4. Following the on-screen prompt, press the Pair button
on the rear panel of the camera. You have 30 seconds
to press the PAIR button on the camera. Once paired,
the camera will be immediately displayed on-screen.

Pairing Button

NOTE: If you do press the Pair button on the camera during
the 30 second pairing window, repeat steps 1~4 to try the
pairing process again.

The Pairing Function assigns each camera to a different
channel on the wireless receiver (connect up to 4
Cameras), and is necessary for configuring additional
cameras. By default the camera that came with the
LW2301 system is assigned to channel no. 1.
NOTE: It is highly recommended to pair the Accessory
Camera to the Receiver before permanently mounting the
camera. For detailed information, please check the
owners manual for the LW2301 system available at
www.lorexcctv.com

It’s all on the Web
For detailed setup information,
please refer to your User’s Manual.
For additional information, please
visit our website

www.lorextechnology.com

www.lorextechnology.com

LW2301AC1 SERIES QSG_EN_R2 Page 2
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Instance ID                     : uuid:5aa2f801-4060-4f0b-89fa-652785e8f111
Document ID                     : adobe:docid:indd:a98b7607-90dd-11de-9c6b-b64dc17741e2
Original Document ID            : adobe:docid:indd:a98b7607-90dd-11de-9c6b-b64dc17741e2
Rendition Class                 : proof:pdf
Derived From Instance ID        : a98b7606-90dd-11de-9c6b-b64dc17741e2
Derived From Document ID        : adobe:docid:indd:a9461be0-8e62-11de-87b3-cf28afe6f2a4
History Action                  : saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:7F26753C07B2DF119BB1D0FBAA5B72CB, xmp.iid:8026753C07B2DF119BB1D0FBAA5B72CB, xmp.iid:8126753C07B2DF119BB1D0FBAA5B72CB, xmp.iid:8526753C07B2DF119BB1D0FBAA5B72CB, xmp.iid:8626753C07B2DF119BB1D0FBAA5B72CB
History When                    : 2010:08:27 14:16:39-04:00, 2010:08:27 14:16:39-04:00, 2010:08:27 14:22:27-04:00, 2010:08:27 14:29:29-04:00, 2010:08:27 14:32:21-04:00
History Software Agent          : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0
History Changed                 : /, /metadata, /, /, /
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 300.00, 72.00, 72.00, 72.00, 300.00, 72.00, 72.00, 72.00
Manifest Placed Y Resolution    : 300.00, 72.00, 72.00, 72.00, 300.00, 72.00, 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:0B3D7763093811DDA87F83B86D1E4EBA, uuid:CE05C20CD84411D9A03BDCF77AA7AB18, uuid:9023A98E908EDE1181D2D41798262A7A, uuid:9023A98E908EDE1181D2D41798262A7A, uuid:0B3D7763093811DDA87F83B86D1E4EBA, uuid:CE05C20CD84411D9A03BDCF77AA7AB18, uuid:9023A98E908EDE1181D2D41798262A7A, uuid:9023A98E908EDE1181D2D41798262A7A
Manifest Reference Document ID  : uuid:0B3D7762093811DDA87F83B86D1E4EBA, uuid:CE05C20BD84411D9A03BDCF77AA7AB18, uuid:8F23A98E908EDE1181D2D41798262A7A, uuid:8F23A98E908EDE1181D2D41798262A7A, uuid:0B3D7762093811DDA87F83B86D1E4EBA, uuid:CE05C20BD84411D9A03BDCF77AA7AB18, uuid:8F23A98E908EDE1181D2D41798262A7A, uuid:8F23A98E908EDE1181D2D41798262A7A
Create Date                     : 2010:08:27 14:37:54-04:00
Modify Date                     : 2010:08:27 14:39:27-04:00
Metadata Date                   : 2010:08:27 14:39:27-04:00
Creator Tool                    : Adobe InDesign CS4 (6.0.5)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 13955 bytes, use -b option to extract)
Doc Change Count                : 57
Format                          : application/pdf
Creator                         : uma radhakrishnan
Subject                         : designed by uma radhakrishnan
Producer                        : Adobe PDF Library 9.0
Trapped                         : False
Page Count                      : 2
Author                          : uma radhakrishnan
Keywords                        : ;, designed, by, uma, radhakrishnan
Warning                         : [Minor] Ignored duplicate Info dictionary
EXIF Metadata provided by EXIF.tools

Navigation menu