Schlage Lock Instructions
User Manual:
Open the PDF directly: View PDF 
.
Page Count: 17
| Download | |
| Open PDF In Browser | View PDF |
Place Label Here Poner la etiqueta aquí Placer l’autocollant ici Keypad Locks Default Codes Códigos de predeterminado Codes du défaut User Guide BE365 PLEASE KEEP THIS GUIDE You will need these codes to operate your lock! FE575/FE595 CONSERVE ESTA GUÍA ¡Necesitará estos códigos para operar la cerradura! VEUILLEZ CONSERVERCE GUIDE Vous aurez besoin de ces codes pour faire fonctionner la serrure! ENGLISH Keypad Locks User’s Guide Contents Warranty............................................................ 2 Lock Parts .......................................................... 4 Keypad Deadbolt ............................................. 4 Keypad Lever ................................................... 5 Keypad Deadbolt ............................................... 6 Locking and Unlocking ...................................... 6 Changing the Battery ........................................ 6 Key Override ..................................................... 7 Lock Override .................................................... 7 Keypad Locks .................................................... 8 Locking and Unlocking ...................................... 8 Key Override ..................................................... 8 Changing the Battery ........................................ 9 Programming Guide ........................................ 10 Schlage Button Signals ................................... 10 Codes .............................................................. 10 Default Code Locations ................................... 10 Basic Controls ..................................................11 Enhanced Controls ......................................... 12 Record Your Codes ......................................... 13 User Codes ..................................................... 13 Troubleshooting .............................................. 14 Restore Factory Settings ................................ 15 Warranty Lifetime Limited Mechanical and Finish Warranty and 3-Year Limited Electronics Warranty Subject to the terms and conditions of the warranty, Schlage extends a lifetime limited mechanical and finish warranty and a three -year limited electronics warranty to the original consumer user (“Original User”) of our Schlage brand product (“Product”) against defects in material and workmanship, as long as the Original User occupies the residential premises upon which the Product was originally installed. See answers.schlage.com for specific warranty details and limitations, or contact Schlage Customer Service at (888) 805-9837 in the U.S., 800-997-4734 in Canada or 018005067866 in Mexico for assistance. Register your Product 2 Document your purchase and register your warranty at RegisterMySchlage.com » PLEASE KEEP THIS GUIDE This guide contains important information about your lock! • Default User Codes and Programming Code are located on the sticker on the back of this guide! You will need these if you ever need to reset your lock back to factory default settings! • The sticker also contains your serial number, which may be needed for warranty and customer service support. » WHY DO I NEED KEYS IF THIS IS A KEYLESS LOCK? Good question! In the event that the battery is dead, or no User Code is known, you can use the key to gain access by employing the emergency key override. ENGLISH • Instructions for adding and deleting User Codes, changing the lock behavior, troubleshooting, customer service and more are explained in this guide! Browse to answers.schlage.com and click on Electronic Keypad Locks in the menu on the right side for videos, troubleshooting, FAQ and more. Questions about your new keypad lock? Please don’t return it to the store! Let us help you first! Need Help? For technical documents and videos, visit answers.schlage.com U.S.A.: 888-805-9837 Canada: 800-997-4734 Mexico: 018005067866 3 LOCK PARTS Keypad Deadbolt Model BE365 Door Interior Door Exterior Schlage Button ENGLISH Keypad Numbers Inside Thumbturn Outside Thumbturn Bolt Cylinder Keypad • Used to enter codes for programming and unlocking. See Programming Guide on page 10 and Locking and Unlocking on page 6 for more information. Outside Thumbturn • Used to unlock the lock after a valid User Code has been entered, or to lock the lock after the Schlage button has been pressed. Cylinder • Used only in emergency situations to unlock the lock. See Key Override on page 7. Inside Thumbturn • Used to lock or unlock the lock. 4 Keypad Lever Models FE575 (Auto Lock) and FE595 (Flex Lock) Door Exterior Door Interior Schlage Button Thumbturn ENGLISH Keypad Numbers Cylinder Latch Outside Lever Inside Lever FE595 (Flex Lock) Keypad • Located on the outside of the lock. • Used to enter codes for programming and unlocking. See Programming Guide on page 10 and Locking and Unlocking on page 8 for more information. Lever • The inside lever can be rotated at any time to retract the latch. FE575 (Auto Lock) • The outside lever can be rotated at any time, but will only retract the latch when the lock is unlocked. Cylinder • Located on the outside of the lock. • Used only in emergency situations to unlock the lock. See Key Override on page 8. Thumbturn • FE595 ONLY: Used to put the lock in a locked or unlocked state. 5 KEYPAD DEADBOLT MODEL BE365 Locking and Unlocking From the outside: ENGLISH To Lock To Unlock 1. Press the Schlage button.* 2. Rotate the thumbturn away from the hinges. lighting is low, press the Schlage button to » Ifilluminate the keypad before beginning. 1. Enter a User Code into the keypad. 2. Rotate the thumbturn toward the hinges. * If the Turn Lock feature is disabled, a valid User Code must be entered to lock the door. See Enable or Disable Lock & Leave on page 12. Changing the Battery » Replace the batteries in your lock at the same time each year that you test and replace the batteries in your smoke alarms. This will ensure continued reliable operation. Use a high-quality alkaline 9 volt battery for replacement. 1. Remove the inside cover. 2. Replace the battery. 3. Re-tuck wires so they will not be crimped. Replace the cover. Lithium Batteries? 6 Lithium batteries may have a longer life, but when they begin to fail, they fail quickly. We don’t recommend them because they don’t give you a lot of time to change your batteries before the lock is completely dead. Key Override Key Override can be used to gain access when the battery is completely dead, when no valid User Code is known or when Lock Override is engaged. 1. Insert the key into the cylinder. 2. Rotate the key 90° toward the hinges. 3. Push the key and cylinder into the thumbturn. 4. Rotate the thumbturn 90° toward the hinges.† ENGLISH † Reverse steps to relock. Hold the thumbturn still while removing the key. See Changing the Battery on page 6 or Restore Factory Settings on page 15 for more information. Lock Override Lock Override can be used to completely disable the keypad. When engaged, a key must be used to unlock the lock. 1. Remove the inside cover. 2. Disconnect and remove the battery. 3. Use a small flathead screwdriver to rotate the lock override slot to LOCKOUT. 4. Re-tuck wires so they will not be crimped. Replace the cover. Slot 7 KEYPAD LOCKS MODELS FE575— AUTO LOCK AND FE595— FLEX LOCK Locking and Unlocking Keypad locks are always locked from the outside, by default. Only the FE595 can be set to unlocked. ENGLISH To Temporarily Unlock lighting is low, press the Schlage button to » Ifilluminate the keypad before beginning. 1. Enter a User Code into the keypad. 2. Rotate the lever to open the door. Door will automatically re-lock. To Set to Unlocked (FE595 Only) 1. Rotate the inside 2. Rotate the thumbturn thumbturn to the back to the horizontal vertical position.* position to re-lock. * No User Code is required to open the door when the lock is set to unlocked. Key Override Key Override can be used when the battery is completely dead, or when no valid User Code is known. 1. Insert key. 2. Rotate key 270° to unlock. 3. Rotate knob/lever to open door.* * Rotate the key back to starting position to relock. The key cannot be removed from the cylinder while the lock is unlocked. See Changing the Battery on page 9 or Restore Factory Settings on page 15 for more information. What is the difference between the Auto Lock and the Flex Lock? 8 The Auto Lock (FE575) is always locked from the outside. The Flex Lock (FE595) is normally locked from the outside, but can be set to unlocked by putting the thumbturn in the vertical position. Changing the Battery » Replace the batteries in your lock at the same time each year that you test and replace the batteries in your smoke alarms. This will ensure continued reliable operation. Use a high-quality alkaline 9 volt battery for replacement. FE595 1. Remove the inside cover. 2. Replace the battery. 3. Replace the cover. ENGLISH FE575 1. Remove the lock from the door. 2. Open the battery compartment and replace the battery. 3. Reinstall the lock on the door. Lithium Batteries? Lithium batteries may have a longer life, but when they begin to fail, they fail quickly. We don’t recommend them because they don’t give you a lot of time to change your batteries before the lock is completely dead. 9 PROGRAMMING GUIDE Schlage Button Signals The color of the Schlage button indicates the status of the lock. Orange Red • the lock is in programming mode • • • • ENGLISH Green • a correct user code was entered • the programming process is complete an incorrect user code was entered there was an error in programming low batteries red blinking indicates critically low battery Codes Control of the lock is simply managed via a six-digit Programming Code and four-digit User Codes. PROGRAMMING CODE USER CODES (Six Numbers) (Four Numbers) • The lock comes preset with one unique default Programming Code. It can be found on the stickers, one on the back of the keypad assembly and one on the front of this User Guide. • The lock comes preset with two unique default User Codes. They may be found on the stickers, one on the back of the keypad assembly and one on the front of this User Guide. • Used to put the lock in programming mode. • Used to unlock the lock. • DOES NOT unlock the lock. • These four numbers must be different from the first four numbers of the Programming Code. • The first four numbers must be different from all of the User Codes currently in the lock. • If you forget the Programming Code, you can reset the lock to factory settings, which restores the default Programming Code. See Restore Factory Settings on page 15. • Up to 19 possible User Codes can be stored in the lock at one time. Default Code Locations The Default User Codes and Programming Code are located in two places: Programming Code XXXXXX User Code A XXXX S/N x-xxxxxxxx User Code B XXXX Model XXXXX Front of this User Guide Programming Code XXXXXX User Code A XXXX S/N x-xxxxxxxx User Code B XXXX Model XXXXX Programming Code XXXXXX Place Label Here User Code A XXXX S/N x-xxxxxxxx Poner laBetiqueta aquí XXXXX User Code XXXX Model Placer l’autocollant ici Keypad Locks Default Codes Códigos de predeterminado Codes du défaut User Guide Programming Code XXXXXX User Code A XXXX S/N x-xxxxxxxx User Code B XXXX Model XXXXX Back of the Keypad must remove the Keypad from the door to see » You this sticker. BE365 PLEASE KEEP THIS GUIDE You will need these codes to operate your lock! 10 FE575/FE595 CONSERVE ESTA GUÍA ¡Necesitará estos códigos para operar la cerradura! VEUILLEZ CONSERVERCE GUIDE Vous aurez besoin de ces codes pour faire fonctionner la serrure! » Basic Controls » Write your programming code here for easy access. Also see Record Your Codes on page 13 for space to record User Codes. PROGRAMMING CODE If you make a mistake during programming, press the Schlage button repeatedly until the keypad lights blue. Then start over. Enter Programming Code (six numbers) Wait for 3 Orange Lights + 3 Beeps Press Keypad turns blue Press Enter New User Code (four numbers) Enter Same New User Code (four numbers) Wait for Wait for Success! 3 Orange Lights + 3 Beeps 3 Orange Lights + 3 Beeps 1 Green Light + Long Beep ENGLISH ADDING USER CODES* * These four numbers must be different from the first four numbers of the Programming Code. DELETING USER CODES Press Enter Programming Code (six numbers) Wait for 3 Orange Lights + 3 Beeps Keypad turns blue Press Enter Unwanted User Code (four numbers) Enter Same Unwanted User Code (four numbers) Wait for Wait for Success! 3 Orange Lights + 3 Beeps 3 Orange Lights + 3 Beeps 1 Green Light + 1 Long Beep CHANGING THE PROGRAMMING CODE* Press Press Enter Programming Code (six numbers) Wait for 3 Orange Lights + 3 Beeps Keypad turns blue Enter New Programming Code (six numbers) Enter Same New Programming Code (six numbers) Wait for Wait for Success! 3 Orange Lights + 3 Beeps 3 Orange Lights + 3 Beeps 1 Green Light + Long Beep * The first four numbers must be different from all of the User Codes currently in the lock. Want to see a video? Browse to answers.schlage.com and search on “How to Program Keypad Lock” for a video. Other videos and information are also available. 11 Enhanced Controls ENGLISH Schlage’s keypad locks were designed with added features that allow you to adapt the lock to your needs. Additional features that you can choose to use include: ENABLE VACATION MODE Enter Press Programming Code (six numbers) Wait for 3 Orange Lights + 3 Beeps DISABLE VACATION MODE Press Success! Keypad turns blue 1 Green Light + 1 Long Beep ENABLE OR DISABLE BEEPER Press Enter Programming Code (six numbers) Wait for 3 Orange Lights + 3 Beeps Keypad turns blue 3 Orange Lights + 3 Beeps Keypad turns blue Enter Programming Code (six numbers) Success! 1 Green Light + 1 Long Beep Press Success! The beeper can be turned off if desired. Beeps will still sound during programming. beeper may not be audible to » The everyone. 1 Green Light + 1 Long Beep DELETE ALL USER CODES Press Enter Programming Code (six numbers) Wait for When enabled, no User Codes will unlock the door, preventing any unauthorized attempts of entry when no one is home for a prolonged period of time. Press Enter Programming Code (six numbers) Wait for Success! 3 Orange Lights + 3 Beeps 1 Green Light + 1 Long Beep Removes ALL User Codes from the lock. ENABLE OR DISABLE LOCK & LEAVE KEYPAD DEADBOLT (BE365) ONLY Enter Programming Code (six numbers) Wait for 12 3 Orange Lights + 3 Beeps Press Keypad turns blue Press Success! 1 Green Light + 1 Long Beep Enabled by default. When enabled, the deadbolt can be locked from the outside by pressing the Schlage button and rotating the thumbturn. When disabled, a User Code must be entered before rotating the thumbturn. Disabling this feature keeps an unauthorized person from locking the door from the outside. RECORD YOUR CODES » KEYPAD WEAR Consider changing your codes on a periodic basis so buttons wear evenly. PROGRAMMING CODE User Codes Up to 19 User Codes can be stored in the lock at one time. NAME EXAMPLE: JOHN SMITH USER CODE 1 2 3 4 ENGLISH » 13 TROUBLESHOOTING Browse to answers.schlage.com and click on Electronic Keypad Locks in the menu on the right side for videos, troubleshooting, FAQ and more. Lights Solution 1 High Green Blinking Your lock has been installed incorrectly and is not secure. Repeat the installation process. Ensure the cam and bolt positions are correct, as referenced in the installation instructions. Browse to answers.schlage. com and search on “Installing BE365” for a video. After pushing and rotating thumbturn, the deadbolt does not extend. None None After entering my User Code, the lock flashes green, but I cannot unlock the lock. 1 High Green Blinking Lock Override is enabled and should be disabled. See Lock Override on page 7. Outside thumbturn does not freely spin after deadbolt is thrown. None None Lock is malfunctioning. Disable the keypad by enabling Lock Override. See Lock Override on page 7. Call Customer Service. I forgot my Programming Code. None None I need to delete a User Code that I don’t remember. None None Delete all User Codes. Then add all needed User Codes back into the lock. See Programming Guide on page 10. 2 Red User Code entered is not a valid User Code. 1 High, 1 Low Green then Red KEYPAD DEADBOLT ONLY ENGLISH Lock Issue I can unlock my deadbolt by simply pushing the Schlage button. I don’t need a code. User Code does not unlock lock. Beeps* Lock and Leave feature is disabled. See Enable or Disable Lock & Leave on page 12. Check the front of this guide or the back of the keypad assembly for the default Programming Code. If needed, restore lock to factory settings. See Restore Factory Settings on page 15. Vacation Mode is enabled. See Disable Vacation Mode on page 12. Too many incorrect User Codes have been entered. Wait 30 seconds and try again. 14 does not light when numbers are pressed. None None If keypad does not respond after 30 seconds, then replace battery. See Changing the Battery on page 6 for Keypad Deadbolt or Changing the Battery on page 9 for Keypad Lock. There is a delay before unlock after a valid User Code is entered. High/ Low, then 1 Red then Green Battery is low and should be replaced. See Changing the Battery on page 6 for Keypad Deadbolt or Changing the Battery on page 9 for Keypad Lock. blinking red but no codes have been entered. None Quick Red Blinking Battery is dead and MUST be replaced. See Changing the Battery on page 6 for Keypad Deadbolt or Changing the Battery on page 9 for Keypad Lock. Lock Issue Beeps* High/ Low Lights Red Cannot add a new User Code. 2 Red Solution 19 User Codes already exist. Delete a User Code before adding a new one. See Deleting User Codes on page 11. Second User Code entered did not match first User Code entered. See Adding User Codes* on page 11. Cannot delete a User Code. 2 Red Cannot change Programming Code. 2 Cannot delete all User Codes. 2 Red Lock will not stay in programming mode. 2 Red Red Second User Code entered did not match first User Code entered. ENGLISH The User Code matches the first four digits of the existing Programming Code. Second Programming Code entered did not match first Programming Code entered. See Changing the Programming Code* on page 11. First four digits of new Programming Code match an existing User Code. Programming Code entered second time is incorrect. was pressed immediately Any key other than after programming mode was entered. An incorrect entry was made during the programming process. * Number of beeps if beeper is turned on. Restore Factory Settings If you lose or forget your Programming Code, you can restore the factory settings, which will restore the default Programming code. 1. Disconnect the battery. 2. Press and release the Schlage button. 3. The following steps must occur within 10 seconds: a. Reconnect the battery. The Schlage button will light green for one second. b. Then, press and hold the Schlage button until it lights green and the lock beeps. WARNING Locate the default Programming and User Codes on the front of this guide or the back of the Keypad Assembly before beginning! Default Programming and User Codes will be restored. All existing User Codes and current Programming Code will be erased. CUSTOMER SERVICE CANNOT RETRIEVE LOST DEFAULT CODES! DO NOT RESTORE FACTORY SETTINGS UNLESS YOU CAN LOCATE THE DEFAULT CODES. 4. Try entering one of the default User Codes. If it does not unlock the lock, start over at step 2. Once you’ve done this, you can change the programming code to a personalized number. See Changing the Programming Code* on page 11. 15 » CONSERVE ESTA GUÍA Cerraduras con teclado Guía del usuario BE365 FE575/FE595 If you have questions about any part of installation or programming, don’t return the Keypad Lock to the store. Our Schlage Customer Service representatives are ready to help. Toll-free: 888-805-9837 answers.schlage.com 24508517 Si tiene dudas acerca de cualquier parte de la instalación o programación, no devuelva la cerradura con teclado a la tienda. Nuestros representantes del Departamento de Servicio de Asistencia al Cliente de Schlage Si vous avez des questions à propos d’une partie de l’installation ou de la programmation, ne retournez pas la serrure à clavier numérique au magasin. Les représentants du service à la clientèle de Schlage sont à votre están listos para ayudarlo. service. Línea gratuita: 888-805-9837 Sans frais : 888-805-9837 answers.schlage.com answers.schlage.com © Allegion 2014 Printed in U.S.A. 24508517 Rev. 07/14-b
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf Linearized : No XMP Toolkit : XMP Core 5.4.0 Creator Tool : Adobe InDesign CS6 (Windows) Metadata Date : 2014:11:03 12:16:30-07:00 Create Date : 2014:07:15 16:05:43-06:00 Modify Date : 2014:11:03 12:16:30-07:00 Format : application/pdf Original Document ID : xmp.did:5CE81B976DB0DF119E72C7CD48D8D9C6 History Software Agent : Adobe InDesign CS6 (Windows) History Parameters : from application/x-indesign to application/pdf History Changed : / History When : 2014:07:15 16:05:43-06:00 History Action : converted Instance ID : uuid:348856a6-b5b9-49af-a68d-68b6765b2a9b Document ID : xmp.id:6C5754076C0CE4119ABECDDC499EFA45 Derived From Rendition Class : default Derived From Document ID : xmp.did:56BED8873E21E3119EBF89D5E13E99F6 Derived From Instance ID : xmp.iid:6B5754076C0CE4119ABECDDC499EFA45 Derived From Original Document ID: xmp.did:5CE81B976DB0DF119E72C7CD48D8D9C6 Rendition Class : proof:pdf Trapped : False Producer : Adobe PDF Library 10.0.1 Page Count : 17 PDF Version : 1.4 Creator : Adobe InDesign CS6 (Windows)EXIF Metadata provided by EXIF.tools