Service_manual Service Manual
User Manual: Service_manual MDCP: Panasonic SJ-MR200 Service Manual
Open the PDF directly: View PDF 
.
Page Count: 59
| Download | |
| Open PDF In Browser | View PDF |
ORDER No.AD0009165C8 Portable MD Recorder SJ-MR200 MD unit: RAE1630Z-M Mechanism Series Colour (S)...................Silver Type (W)..................White Type Areas EB...................Great Britain. EG...................Europe. GH...................Hong Kong. SPECIFICATIONS Specifications 1 Audio System: MiniDisc digital audio system Laser: Semiconductor laser (=780 nm) Sampling frequency: 44.1 kHz Coding: Adaptive Transform Acoustic Coding (ATRAC) No. of channels: 2 (left and right, stereo) 1 (monaural) Frequency response: 20 Hz-20 kHz (+0 dB, -6dB) Wow and flutter: Below measurable limit General Input terminal OPT/LINE IN jack Impedance: 47k Input level: SENS H: 178mV SENS L: 500mV MIC jack Impedance: 600 Input level: 0.4mV Output terminal Output Jack: Phones, 22 Power output: 3.5 mW+3.5 mW Power supply Rechargeable battery: DC 1.2V (included rechargeable battery) Battery: DC 1.5V (One LR6, AA, UM-3 battery) AC adaptor: DC 1.8V (included AC adaptor) Dimensions (WxHxD) Cabinet dimensions: 78.2x71.6x16.8 mm incl.projecting parts: 79.9x73.6x18.6 mm Weight: 120 g (with battery) 94 g (without battery) Play time (When used in hold mode, at 25°C, on a flat, stable surface) Battery type: Play time Record time Rechargeable: About 15 hours About 7 hours Panasonic alkaline: About 21 hours About 3 hours Both together: About 38 hours About 15 hours Charger Input: AC 220 V (GH) / AC220-230 V (EG) / AC 230-240V (EB), 50/60 Hz 8W Recharging time: About 3 hours 2 Notes: - The play time may be less depending on the operating conditions. - Specifications are subject to charge without notice. Weight and dimensions are approximate. 2000 Matsushita Electric Industrial Co., Ltd. All rights reserved. Unauthorized copying and distribution is a violation of law. 1. Accessories - Rechargeable battery with carrying case .............1pc. (RFKFHFAZ01EM) - External battery case...............................................1pc. (RFA1537-S) - Carrying case.........................................................1pc. (RFC0056-K) - Wired remote control.............................................1pc. (N2QCBD000007) - Stereo earphones..................................................1pc. (RFEV335P-SA) - Connection cable..................................................1pc. (K2KA39B00001) For EB area - AC adaptor.............................................................1pc. (RFEA003B-S) For EG area - AC adaptor.............................................................1pc. (N0JCAD000001) For GH area - AC adaptor.............................................................1pc. (RFEA004H-S) 2. Precation of Laser Diode 3 3. Operating Instructions 4. Handling Precautions for Traverse Deck The laser diode in the traverse deck (optical pickup) may break down due to potential difference caused by static electricity of clothes or human body. So, be careful of electrostatic breakdown during repair of the traverse deck (optical pickup). 4.1. Handling the traverse deck (optical pickup) 1. The traverse deck (optical pickup) is an extremely high-precision construction and must not be subjected to impact, excessive 4 vibration, or other types of rough handling. 2. In order to prevent static electricity damage to the laser diode, use a short pin or similar tool to short the optical pickup’s flexible circuit boards after they have been disconnected from the main circuit board. (as shown in Fig. 1 ) 3. Handle the flexible circuit boards with care; excessive force could cause them to be broken. 4. Do not turn the pre-set variable resistor (for adjustment of the laser power); it has been adjusted at the factory. (as shown in Fig. 2 ) Fig. 1 Fig. 2 4.2. Grounding for electrostatic breakdown prevention 1. Human body grounding Use the anti-static wrist strap to discharge the static electricity from your body. (as shown in Fig. 3 ) 2. Work table grounding Put a conductive material (sheet) or steel sheet on the area where the traverse deck (optical pickup) is placed, and ground the sheet. 5 (as shown in Fig. 4 ) Caution The static electricity of your clothes will not be grounded through the wrist strap. So, take care not to let your clothes touch the traverse deck (optical pickup). Fig. 3 Fig. 4 5. Operation Checks and Component Replacement Procedures - This section describes procedures for checking the operation of the major printed circuit boards and replacing the main components. - For reassembly after operation checks or replacement, reverse the respective procedures. Special reassembly procedures are described only when required. - After replacing the main components (optical pickup or traverse motor, etc.) of mechanism unit block, change to the adjust mode, and then perform the “ROM/RAM auto-adjustment”. 5.1. Checking for the main P.C.B. 6 - Check the main P.C.B. (A side) as shown below. [Checking for the main P.C.B. (B side)] - Each parts on main P.C.B. (B side) can not be checkesd directly, however, for the checking of main component parts on P.C.B., refer to the “Checking procedures of main components parts on the main P.C.B. (B side). 7 5.2. Replacement for the intermediate cabinet - Follow the (Step 1) - (Step 3) of item 5.1. 5.3. Replacement for the open knob and lock unit - Follow the (Step 1) - (Step 3) of item 5.1. 8 - Follow the (Step 1) - (Step 3) of item 5.2. 5.4. Replacement for the traverse motor - Follow the (Step 1) - (Step 3) of item 5.1. 9 5.5. Replacement for the LCD - Follow the (Step 1) - (Step 3) of item 5.1. - Follow the (Step 1) - (Step 3) of item 5.2. 10 11 5.6. Replacement for the lift motor - Follow the (Step 1) - (Step 3) of item 5.1. - Follow the (Step 1) - (Step 3) of item 5.2. - Follow the (Step 1) of item 5.5. 12 5.7. Replacement for the optical pickup - Follow the (Step 1) - (Step 3) of item 5.1. - Follow the (Step 1) - (Step 3) of item 5.2. - Follow the (Step 1) - (Step 4) of item 5.4. - Follow the (Step 1) of item 5.5. 13 14 15 6. Measurements and Adjsutments Note: After replacing the main components (optical pickup or traverse motor, etc.) of mechanism unit block, change to the adjust mode, and then perform the “ROM/RAM auto-adjustment”. 6.1. Instruments to prepare 1. Playback-only disc (Test disc RFKV0006) 2. Commercially available recordable disc (fully recorded with music) (magneto-optical disc) 3. Laser power meter (LE8010 or compatible meter) 16 4. Remote controller 6.2. Laser power adjustment, Playback-only disc/magneto-optical disc automatic adjustment 6.2.1. Enter the adjustment mode 1. Set the battery and connect the remote controller. 2. Turn off the power, and switch main unit’s HOLD switch off. 3. Press the VOL+, VOL-, , and buttons on the remote controller within two seconds. (as shown in Fig. 5 ) Fig. 5 4. When the adjustment mode is activated, “ T1 EX ” will be displayed on the LCD of remote controller. After “ T1 EX ” is displayed, select the desired adjustment item with the button or button of the remote controller. (If it is not displayed, perform the procedures written above again.) Adjustment mode 17 Adjustment mode Display Laser power adjustment T1 Magneto-optical disc automatic adjustment T2 Playback-only disc automatic adjustment T3 EFM jitter meajurement T4 Record inspection T5 REC jitter meajurement T6 Magneto-optical disc automatic adjustment value check T7 Playback-only disc automatic adjustment value check T8 Error rate measurement (double velocity) T9 AD read result confirmation TA ROM collection check sum TB DRAM check TC Reliability test TD Tilt measurement (disc middle speed) TE PWB inspection (audio test) TF *In the display of T1 ~ TF shown above, you must adjust T1, T2 and TF. You must perform the adjustment by observing the order T1 T2 T3. 6.2.2. Laser Power Adjustment Adjust each laser power: read power for reading (play) and write power for writing (record). 6.2.2.1. Set the Unit to the Adjustment Mode Cautions About handling the optical pickup and the magnetic head. - The optical pickup and the magnetic head are structured precisely; therefore, they are very fragile. Be careful not to touch them with the edge of the laser power meter. Do not touch the lens. - The sensor of the laser power meter is a very fine part. Be careful not to touch it to the optical pickup lens. - Do not loosen or remove the magnetic head installing screw. - The focus point of the laser reaches to 356°F. Therefore, avoid adjusting using laser power for a long time because the sensor of the laser power meter may be burned. - Do not allow the write power to even momentarily reach or exceed 5 mW. Doing so will result in damage to the optical pickup. - Do not set the unit to the laser power adjustment mode with the MD loaded. Doing so may result in damage to the MD. - Laser diode in the optical pickup may be destroyed by the 18 staticelectricity generated in your clothes or body. Be especially careful with the static electricity. 6.2.2.2. Adjustment Procedure 1. Have “ T1 EX ” indicated on display, and move the optical pickup to the most inside (only when a MD cartridge type laser power meter is used). 2. Uncover the laser power meter. (as shown in Fig. 6 ) Fig. 6 3. Locate the sensor of the laser power meter at a position above the optical pickup (horizontally at a level of the disc position). (as shown in Fig. 7 ) Fig. 7 4. Press the PLAY key of the remote controller (“ T1 EX ” changes to “ LD ” of the LCD). 5. Press the key of the remote controller (“ LD ” changes to “ LP ” of the LCD). 6. Perform the read power adjustment. Set the light power at 600 ±10% by using VOL+ and VOL- key of the remote controller. Caution: Proceeding on to the subsequent adjustment procedure with the read power exceeding 600 W±10% will result in damage to the optical pickup. 7. Press the key of the remote controller (“ LP ” changes to “ 19 W RLDA ” in the LCD). Specified range (read power): 600 W±10% or lower 8. Perfome the light power adjustment. Set the light power at 4.55mW by using VOL+ and VOL- key of the remote controller. If at this time the amperage between TP405 and TP406 (laser current) is 70mA or higher, it is conceivable that theoptical pickup is defective. Specified range (light power): 4.5mW Caution: Do not allow the write power to even momentarily reach or exceed 5 mW. Doing so will result in damage to the optical pickup. 9. Press the key of the remote controller (“ RLDA ” changes to “ LP ” on the LDC. At this time, the data is written to EEPROM.). 10. Press the PLAY key on the remote controller (“ LP ” changes to “ T1 EX ” on the LCD.). 11. Remove the laser power meter. Laser power adjustment is finished. [REFERENCE] For use of MD cartridge type laser power meter: / We recommend you to use a stick type laser power meter for laser power adjustment of this set. / But if available is a MD cartridge type only, arrange the set as shown in Fig. 9 , and from the state of “6.2.1. Enter the adjustment mode”, start the laser power adjustment. / (As for the method of disassembly, refer to “5. Operation checks and main component replacementprocedures”.) Fig. 8 6.2.3. Magneto-optical disc automatically adjustment 1. Have “ T2 EX ” indicated on display, and move the optical pickup to around the center (only when a MD cartridge type laser power meter is used). 20 2. Set the full-recorded magneto-optical disc with the prevention erase situation. 3. Press the PLAY key of the remote controller (“ T2 EX ” changes to “ 1AADJ ” on the LCD, adjustment is started.). 4. If it has been finished normally, “ 1ADDJ ” changes to “ 1AOK ” on LCD. If it is abnormally, it changes to “ 1ANG ”. 5. Press the PLAY key (“ 1AOK ” or “ 1ANG ” changes to “ T2 EX ”, magneto-optical disc adjusment is finished.). Note: If it is displayed “ 0ANG ”, check the “Troubleshooting Procedures” in the order. 6.2.4. Playback-only disc automatically adjustment 1. Have “ T3 EX ” indicated on display, and move the optical pickup to around center (only when a MD cartridge type laser power meter is used). 2. Set the playback-only disc. 3. Press the PLAY key of the remote controller (“ T1 EX ” changes to “ 00ADJ ” (or “ 10ADJ ”) on the LCD, adjusment is started.). 4. If it has been finished normally, “ 0AADJ ” (or “ 10ADJ ”) changes to “ 00OK ” (or “ 10OK ”) on LCD. If it is abnormally, it changes to “ 00NG ” (or “ 10NG ”). 5. Press the PLAY key [“ 00OK ” (or “ 10OK ”) or “ 00NG ” (or “ 10NG ”) changes to “ T3 EX ”, playback-only discadjustment is finished.] Note: If it is displayed “ 00NG ” (or “ 10NG ”), check the “Troubleshooting Procedures” in the order. 6.2.5. How to get out the adjustment mode Remove the battery when you finish the adjustment mode. 6.3. Checking the main unit's keys 1. Set the battery and connect the remote controller. 2. Turn off the power. Then, with the main unit’s HOLD switch at 21 OFF, press the VOL+, VOL-, , and buttonson the remote controller within two seconds. (as shown in Fig. 5 ) 3. When entering the main unit’s key check mode, “ KEY EX ” will be displayed on the LCD of main unit and “ T KEX ” will be displayed on the LCD of remote controller. (If it is notdisplayed, perform the procedures written above again.) 4. Confirm the display of LCD by pressing any keys on the main unit. There is no order to press the keys. Mian unit’s keys LCD display positions and letters HOLD OFF 1st. 2nd. letters are AA REC PAUSE 3rd. 4th. letters are BB EDIT 5th. 6th. letters are CC STOP 7th. 8th. letters are DD PLAY 9th. 10th. letters are EE 5. Remote controller’s LCD lights “ T lights all when you can detect all keys. ” and main unit’s LCD 6. Perform below voltage check about the keys come under if you cannot detect the key. Main unit’s keys Check points ON OFF HOLD IC501 55pin 0V 2.4V REC PAUSE IC501 49pin 0V 2.4V EDIT IC501 3pin 1.94V 2.4V STOP IC501 3pin 0V 2.4V PLAY IC501 48pin 0V 2.4V 7. When the keys are ready for detection, press the PLAY key of the remote control. 8. Pressing each key mounted to the main body, make sure of displayed three letters (4th ~ 6th letters) on the right side of the remote control. / Keys to be pressed are not in order. / When the 3 keys apportioned to the respective letters asshown below are all OK, “ 0 ” is displayed. 22 Display position Main unit’s keys 4th. letter DISPLAY, PLAYMODE, EQ 5th. letter Flat pad lower rank 3 key 6th. letter Flat pad upper rank 3 key 9. Upon detection of all keys, “ 000 ” is shown on the right side of LCD of the remote control. 10. Perform below voltage check about the keys come under if you cannot detect the key. Main unit’s keys Check points ON OFF DISPLAY IC501 3pin 1.45V 2.4V PLAYMODE IC501 3pin 0.44V 2.4V EQ IC501 3pin 1.0V 2.4V Flat pad (*1) IC501 6~8pin 2.4V 0V 11. Remove the battery when you exit from this mode. Note: Refer to “Printed Circuit Board and Wiring Connection Diagram” for the test points. 7. Troubleshooting Guide 23 24 25 26 27 28 29 30 31 8. Checking Procedures of Main Components Parts on the Main P.C.B. (B side) As it cannot meajure the mechanism side of MAIN P.C.B. directly, refer to the table shown below for the criterion in the time of repairing or checking. 32 Circuit No. Part No. Function Symptom Check point Result and measure IC304C0DBAGZ00006DC-DC Recording is converter / 3.5V impracticable. / Power IC for magnetic head driver control Confirm the voltage of IC403 (pin 14) or (TP137) Confirm the voltage of IC501 (pin 74) If voltage at TP137 normal and voltage IC501 is unusual, IC501 and switch periphery. If voltage at TP137 unusual, replace IC401 C0GBE000003 Optical head lift motor drive Recording is impracticable. Magnetic head fails to descend. Confirm the If drive wave normal, check FPC motor drive wave form of TP144 ~ 147 condition of solder around lift motor, (CN402 pins 1 ~ 4) nothing unusual found, replace the motor. If drive wave unusual, check supplyvoltage of and peripheral solder, and if nothing unusual found, replace IC401. IC701 AN7635SH-E1 MIC/LINE AMP Optical input permits recording, but line input does not. MIC recording is impracticable. Make sure of IC601 (pins 2, 3) input wave form (during MIC/LINE input time). If input wave IC601 is unusual, supply voltage of and peripheral solder, and if nothing unusual found, replace IC701. If input wave IC601 is normal, checkIC601 and perihperal circuit. 9. Display of Self-Diagnostic Function This model is equipped with a self-diagnosis function and shows, when necessary, the following indication in the LCD section of the set. “F17”---This indication appears when the Down switch fails to turn ON since the magnetic head 33 fails to move up/down normally (Due to trouble of the magnetic head or trouble of the magnetic head up/down motor)or the magnetic head P.C.B. is out of position or a foreign matter has mixed in or for some other reason. In such a case, check the peripheral parts of the magnetic head, repair or replace defective parts with normal ones. 10. Schematic Diagram Notes 10.1. Schemtic Diagram Notes This schematic diagram may be modified at any time with the development of new technology. Notes: : Magnetic head up switch (M.HEAD UP) S1 S501 : Open det. switch (OPEN ) : Hold swithc in “OFF” position. (HOLD ) S502 : PROTECT det. switch S503 : Play / record / pause / operation on / S801 character type button ( , CHARA) : Recording pause / operation on switch S802 (REC ) S803 : Stop / operation off / edit cancel button ( OPR OFF) , : Play and record mode / character delete S804 button (MODE, DELETE) : Tone / recording sensitivity / space button S805 (EQ / REC SENS, SPACE) : Display, capital / lower case button (DISP, S806 CAPS) : Changing edit mode, changing track mark S807 mode, completing edit button (EDIT, MARK MODE) - Indicated voltage values are the standard values for the unit measured by the DC electronic circuit tester (high-impedance) with the chassis taken as standard. Therefore, there may exist some errors in the voltage values, depending on theinternal impedance of the DC circuit tester. No mark: MD STOP ( ): MD play [1kHz, L+R, 0dB] Important safety notice: 34 Components identified by mark have special characteristics important for safety. Furthermore, special parts which have purpose of fire-retardant (resistors), high-quality sound (capacitors), low-noise (resistors), etc. are used. When replacing any of components, be sure to use only manufacture's specified parts shown in theparts list. Caution! IC and LSI are sensitive to static electricity. Secondary trouble can be prevented by taking care during repair. Cover the parts boxes made of plastics with aluminum foil. Ground the soldering iron. Put a conductive mat on the work table. Do not touch the legs of IC or LSI with the fingers directly. Voltage and signal line : Positive voltage line : Playback signal line : Recording signal “digital” line : Recording signal “analog” line : Mic signal line 10.2. Type Illustration of IC's, Transistors and Diodes 11. Schematic Diagram 12. Printed Circuit Board Diagram 13. Block Diagram 14. Wiring Connection Diagram 15. Terminal Function of IC's 15.1. IC1 (AN8772FHKEBV) : RF AMP 35 Pin No. Mark I/O Division Function 1 CENVD I D signal det. capacitor input terminal 2 LDO O Laser amp output terminal 3 APCPD I Photo diode light quantity det. input terminal 4 LD IN I Laser amp reverse input terminal 5 APC REF I APC amp reference voltage input terminal 6 TEMP IN I Temperature sensor amp input terminal 7 TEMP O Temperature sensor amp output terminal 8 ADIP O ADIP signal output terminal 9 TOFS I Tracking error offset adjustment terminal 10 TBAL I Tracking ballance adjustment input terminal 11 TE O Tracking error signal output terminal 12 CRS IN I Track cross input terminal 13 TGAIN I Tracking gain adjustment input terminal 14 LNP O Lens position signal output terminal 15 AB GAIN I APP compensation signal gain adjustment terminal 16 FE O Focus error signal output terminal 17 AS GAIN I AS gain adjustment input terminal 18 FBAL I Focus ballance adjustment input terminal 19 AS/ MON3T O AS/3TMON signal output terminal 20 CEA I 3T envelope det. capacitor connection terminal (Connected to power supply through capacitor) 21 BDO/ / TRCRS O BDO/Track cross signal output terminal 36 Pin No. Mark I/O Division Function 22 CBD O O BDO detection capacitor connection terminal (Connected to GND through capacitor) 23 OFT O O Off track detection signal output terminal 24 GND — GND terminal 25 OFT IN I Off track detection signal input terminal 26 V CC I Power supply terminal (+ 3V) 27 NRFDET/ / OFTR O NRFDET/off track signal output terminal 28 NRFLD I Serial command latch signal input terminal 29 RF DATA I Serial command data signal input terminal 30 RFCK I Serial command clock input terminal 31 NRFSTBY I Standby control signal input terminal 32 OUT RF O EFM signal output terminal 33 CRF AGC — RFAGC capacitor connection terminal (Connected to GND through capacitor) 34 EQ IN I EQ input terminal 35 ARFO O RF amp. output terminal 36 SVREF I Reference voltage input terminal 37 VREF I Reference voltage input terminal 38 RF1 I RF1 signal input terminal 39 RF2 I RF2 signal input terminal 40 F1 I F1 signal input terminal 41 F2 I F2 signal input terminal 42 CLPF1 I APP compensation LPF capacitor input terminal 43 EQADJ — RF equalizer adjustment resistor connection terminal (Connected to power supply through resistor) 37 Pin No. Mark 44 / A / ~ / D ~ / 47 48 CENVC I/O Division Function I Main beam A~D signal input terminal I Beam E signal detection capacitor input terminal 15.2. IC101 (M66616RB2) : ATRAC ENCORDER/DECORDER, SERVO SIGNAL PROCESSOR Pin No. Mark I/O Division Function 1 ADIP I ADIP FM signal input terminal 2 LNP I Lens position signal input terminal 3 FE I Focus error signal input terminal 4 TE I Tracking error signal input terminal 5 AS I AS signal input terminal 6 DRMONI I Drive voltage monitor input terminal 7 BAT I Battery power supply terminal 8 AMONI — Servo analog monitor signal output (Not used, open) 9 VREFI I Reference voltage input terminal 10 TOFS O Tracking off-set adjustment output terminal 11 FBAL O Focus balance adjustment output terminal 12 TBAL O Tracking balance adjustment output terminal 13 TGAIN O TE error gain adjustment output terminal 14 ASGAIN O Main beam amp gain adjustment output terminal 15 ABGAIN O APP adjustment output terminal 16 AV DD 1 I Power supply terminal 17 AV SS 1 — GND terminal 38 Pin No. Mark I/O Division Function 18 TRDP O Tracking drive (+) PWM signal output terminal 19 TRDM O Tracking drive (-) PWM signal output terminal 20 FODP O Focus drive (+) PWM signal ouutput terminal 21 FODM O Focus drive (-) PWM signal/ focus, tracking ON/OFF signal output terminal 22 SPDP O Spindle drive (+) PWM signal output terminal 23 DIR O Spindle drive (-) PWM signal output terminal 24 DV DD 0 I Power supply terminal 25 FG I FG input terminal 26 STPO0 O Stepper drive signal 0 output terminal 27 STPO1 O Stepper drive signal 1 output terminal 28 IV DD 0 I Power supply terminal for I/ O pad 29 DV ss 0 — GND terminal 30 RAD12 O 31 RAD11 DRAM address output terminal (Not used, open) 32 / RAD10 / ~42 ~RAD0 O DRAM address output terminal 43 / RDT3 / ~ / ~ / RDT0 46 I/O DRAM data input/output terminal 47 NRAS O DRAM row address strobe output terminal 48 NCAS O DRAM culum address strobe output terminal 49 NWE O DRAM write enable output terminal 50 NRST I Reset signal input terminal 51 SELAD I MSP/MDA,I/F address select input terminal (“H” Address) 52 SSCK I MSP/MDA,I/F clock input terminal 53 SSDW I MSP/MDA,I/F write data input terminal 39 Pin No. Mark I/O Division Function 54 SSDR O MSP/MDA,I/F read data output terminal 55 MDISY O Leader synchronous signal output 56 SCTSY O ADIP synchronous noise output terminal 57 SGSYNC O Frame synchronous signal output terminal 58 DV DD 1 I Power supply terminal 59 IV DD 1 — Power supply terminal for I/ O pad 60 DV ss 1 — GND terminal 61 FS384 O 384 Fs output terminal 62 SCL O Bit clock output terminal 63 SWS O Word clock output terminal 64 SDAP O Audio data output terminal 65 SDAR I Audio data input terminal 66 STPI1 I Stepper status 1 input terminal 67 STPI2 I Stepper status 2 input terminal 68 STPI0 I Stepper status 0 input terminal 69 STPO2 O Stepper drive signal 2 output terminal 70 RX1 I Digital audio interface signal 1 input terminal 71 NRECP I Amp. Play/Rec switching signal input terminal 72 NREFM O EFM modulation inverted output 73 REFM O EFM modulation inverted output terminal 74 MONI3 O Monitor signal output (Not used) 75 MONI2 O Monitor signal output (Not used) 76 MONI1 O Monitor signal output (Not used) 77 MONI0 O Monitor signal output (Not used) 78 TS3 — Not used, connected to GND 40 Pin No. Mark I/O Division Function 79 TS2 — Not used, connected to GND 80 TS1 — Not used, connected to GND 81 TS0 — Not used, connected to GND 82 EXSYSCK I External system clock input terminal (Not used, connected to GND) 83 DV DD 2 I Power supply terminal 84 XI I Crystal oscillator input terminal (F=16.9344MHz) 85 XO O Crystal oscillator output terminal (F=16.9344MHz) 86 VDss2 — GND terminal 87 RFDAT O RF serial data output terminal 88 RFCK O RF serial clock output terminal 89 NRFLD O RF serial load output terminal 90 TRCRS I Track cross input terminal 91 OFTR I Off-track signal input terminal 92 APCD O Laser power PWM output terminal 93 EXEFMCK I External FM clock input terminal (Not used, connected to GND through registor) 94 PEFM1 O EFM loop filter output terminal 95 EFMIREF I EFM PLL reference current input terminal 96 EFMPLLF O EFM PLL filter output terminal 97 PEFMS I EFM signal input terminal 98 AV DD 0 I Power supply terminal 99 AVss0 — GND terminal 100 TEFSEL — Tracking error signal output terminal 15.3. IC402 (BD6605KVT) : FOCUS/TRACKING COIL, TRAVERSE 41 MOTOR DRIVE, SPINDLE MOTOR DRIVE, ROTARY DETECTOR Pin No. Mark I/O Division Function 1 SPWIN I Roter position detect comparater(W) input terminal 2 SPCOM I Spindle motor coil center input terminal 3 EXTCLK I Not used, open 4 C1P — Charge pump capacitor 1(+) connect terminal 5 C1M — Charge pump capacitor 1(-) connect terminal 6 C2P — Charge pump capacitor 2(+) connect terminal 7 C2M — Charge pump capacitor 2(-) connect terminal 8 VG O Charge pump output terminal 9 SLVM1 I Power supply terminal 10 SLUOUT O Stepping motor (U) output terminal 11 SLPG1 — GND termial 12 SLVOUT O Stepping motor (V) output terminal 13 SLVM2 I Power supply terminal 14 SLWOUT O Stepping motor (W) output terminal 15 SLPG2 — GND terminal 16 SLCOM I Step motor coil center input terminal 17 BEMFW O Step detect comparater (W) output terminal 18 BEMFV O Step detect comparater (V) output terminal 19 BEMFU O Step detect comparater (U) output terminal 20 S3 I Stepping decorder 3 input terminal 21 S2 I Stepping decorder 2 input terminal 22 S1 I Stepping decorder 1 input terminal 23 SGND — GND terminal 42 Pin No. Mark I/O Division Function 24 ASGND — 25 STHB I H1, H2 bridge mute input terminal 26 STALL I Standby input terminal 27 PW1VM I Power supply terminal 28 PW1OUT O Hlaf bridge 1 output terminal / (Not used, open) 29 PWPG — GND terminal 30 PW2OUT O Half bridge 2 output terminal 31 PW2VM I Power supply terminal 32 PWIN2 I Half bridge input terminal 33 PWIN1 — 34 IN 2R I H bridge 2 reverse input terminal 35 IN 2F I H bridge 2 forward input terminal 36 IN 1R I H bridge 1 reverse input terminal 37 IN 1F I H bridge 1 forward input terminal 38 H2 PG2 — GND terminal 39 H2 R OUT O H bridge 2 reverse output terminal 40 H2 VM I Power supply terminal 41 H2 F OUT O H bridge 2 forward output terminal 42 H2 PG1 — GND terminal 43 H1 PG2 — GND terminal 44 H1 R OUT O H bridge 1 reverse output terminal 45 H1 VM I Power supply terminal 46 H1 F OUT O H bridge 1 forward output terminal 47 H1 PG1 — GND terminal 48 CST — Connected to GND through capacitor 49 CSL1 I 50 CSL2 Slope capacitor connection terminal (Connected to GND through capacitor) 51 FG O Speed pulse output terminal GND terminal GND terminal 43 Pin No. Mark I/O Division Function 52 BRK- I Brake comparater- input terminal 53 BRK+ I Brake comparater+ input terminal 54 V CC 2 I Power supply terminal 55 V CC 1 I Power supply terminal 56 SP VM1 I Half bridge 1 input terminal 57 SP U OUT O Spindle motor coil (U) output terminal 58 SP PG1 — GND terminal 59 SP V OUT O Spindle motor coil (V) output terminal 60 SP VM2 I Half bridge input terminal 61 SP W OUT O Spindle motor coil (W) output terminal 62 SP PG2 — GND terminal 63 SP U IN I Roter position detect comparater (U) input terminal 64 SP V IN I Roter position detect comparater (V) input terminal 15.4. IC501 (MN101C32GAD) : SYSTEM CONTROL Pin No. Mark I/O Division Function 1 VREF- I Reference voltage input terminal 2 REM KEY I Remote cont. key input terminal 3 KEY IN1 I Unit key1 input terminal 4 TEMP I Temperature sensor input terminal 5 BATT1 I Battery voltage det. input terminal 6 FP IN1 I Flat pad 1 input terminal 7 FP IN2 I Flat pad 2 input terminal 8 FP IN3 I Flat pad 3 input terminal 9 AN7 — 10 VREF+ I Reference voltage input terminal 11 V DD I Power supply terminal Connected to power supply 44 Pin No. Mark I/O Division Function 12 OSC2 I System clock input terminal (f=10.02MHz) 13 OSC1 O System clock output terminal (f=10.02MHz) 14 VSS — GND terminal 15 XI I Sub clock input terminal (Not used, connected to GND) 16 XO O Sub clock output terminal (Not used, open) 17 MMOD — Memory mode select input terminal (Connected to GND) 18 REM DATA O LCD driver data output terminal 19 LINK RXD I Link serial input terminal 20 NC O Not used 21 SSDW O MSP/MDA interface writing data output terminal 22 SSDR I MSP/MDA interface reading data input terminal 23 SSCLK O MSP/MDA interface data forward clock output terminal 24 BUZZER O Buzzer output trminal 25 RST I Reset signal input terminal 26 SELAD O MSP/MDA interface address signal output terminal 27 ATRAC CNT O ATRAC contorl output terminal (“H”:NORMAL, “L” :HiFi) 28 LCD STB O LCD driver strobe signal output terminal 29 REC SENSE O REC sensitivity select output terminal 30 MONO/ ST O REC amp monaural/stereo select terminal 31 WAKEUP I Micro computer wake up signal input terminal 32 MDISY I Leader synchronize signal from IC101 input terminal 45 Pin No. Mark I/O Division 33 SCTSY I ADIP/sub A synchronize signal from IC101 input terminal 34 CFSYNC I MDA synchronize signal from IC101 input trminal (11.6ms pulse) 35 OPENSW I Disc cover open/close switch det. input terminal (“H”:open, “L”:close) 36 LCD DATA O LCD driver data output terminal 37 — — Connected to GND 38 LCD CK I LCD driver clock input terminal 39 DEBUG O Micro computer debug output terminal (Not used, open) 40 DOCTOR O Doctor mode input terminal 41 NC — Not used, open 42 CHARGE1 O Recharging control output terminal 43 NRECP O Track jump det. output terminal 44 EEPCS O EEPROM chip select output terminal 45 EEPCK O EEPROM clock output terminal 46 EEPDATA0 O EEPROM data output terminal 47 EEPDATAI I EEPROM data input terminal 48 PLAY KEY I PLAY/PAUSE KEY input terminal 49 REC KEY I REC/PAUSE KEY input terminal 50 DC IN WAKEUP I DC IN wake up input terminal 51 REG I Area selection input terminal 52 MHEAD UP I Magnetic head down input terminal I Erase prevention switch input terminal 53 PROTECT Function 46 Pin No. Mark I/O Division 54 JITTER OK I Connected to power supply through resistor 55 HOLD SW I HOLD switch input terminal (“H”:OFF, “L”:ON) 56 DCINDET I DC IN det. input terminal 57 MIC DET I Mic det. input terminal 58 INSEL I INPUT select det. input terminal 59 FPOUT1 / JOGA O Flat pad A output terminal 60 FPOUT2 / JOGB O Flat pad B output terminal 61 MIC/LINE O MIC/LINE select output terminal 62 LOAD0 O Magnetic head movement control 0 output terminal 63 LOAD1 O Magnetic head movement control 1 output terminal 64 HFON1 I HF module ON 1 input terminal 65 MUTEA O Analog mute A output terminal 66 MUTEB O Analog mute B output terminal 67 NRFSTBY O RF amp standby output terminal 68 ADC OFF O ADC OFF output terminal 69 LOW BST O VMS select output terminal 70 DEO O DE enphasis output terminal 71 DAC OFF O DAC off output terminal 72 RECCNT2 O REC control 2 output terminal 73 O RF power supply control output terminal 74 RECCNT1 O REC control 1 output terminal 75 PWRCNT O Power supply control output terminal 76 EL ON I EL display control input terminal RFCNT Function 47 Pin No. Mark I/O Division Function 77 PC O 4ch driver standby output terminal 78 STBY2 O FD/TR coil power supply control output terminal 79 NC — Not used, open 80 MSP RST O MSP reset output terminal 16. Caution in Use of Rechargeable Battery Ass'y - Take Rechargeable Battery Ass’y out of Battery Carrying Case and use it. - Be sure to carry Rechargeable Battery Carrying Case. If not, it may either heat or ignite by shorting with a metal. (as shown in Fig. 9 ) Fig. 9 17. Supply of Rechargeable Battery Ass'y as Replacement Parts Please take note of the following points relating to Battery Carrying Case to be used for protection of Rechargeable Battery Ass’y from shorting. Replacement Parts: - Rechargeable Battery Ass’y (RFKFBP140HSY) supplied will be provided with Battery Carrying Case (RFA0475-Q). - No replacement parts will be supplied for Rechargeable Battry Ass’y without Battery Carrying Case. - Replacement parts will be supplied for Battery Carrying Case (RFA0475-Q) without Rechargeable Battery Ass’y. - To your customers, delivery Rechargeable Battery Ass’y together with Battery Carrying Case to prevent shorting accidents that may occur when Rechargeable Battery Ass’y is carried about Battery Carrying Case. (as shown in Fig. 10 ) Fig. 10 48 18. Replacement Parts List Notes: *Important safety notice: / Components identified by mark have special characteristics important for safety. / Funrthermore, special parts which have purposes of fire-retardant (resistors), high-quality sound (capacitors),low-noise (resistors), etc. are used. / When replacing any of components, be sure to use only manufacture’s specified parts shown in the parts list. / *Warning: This product uses a laser diode. Refer to caution statements. *ACHTUNG:Die lasereinheit nicht zerlegen.Die lasereinheit darf nur gegen einc vom hersteller spezifizierte einheit ausgetauscht werden. *Capacity values are in microfarads (uF) unless specified otherwise, P=Pico-farads (pF) F= Farads (F) / *Resistance values are in ohms, unless specified otherwise, 1K=1,000 (OHM), 1M= 1,000K (OHM) *The markingindicates that the Retention Time is limited for this item. After the discontinuation of this assembly in production, the item will continue to be available for a specific period of time. The retentionperiod of availability is dependant on the type of assembly , and in accordance with the laws governing part and product retention. After the end of this period, the assembly will no longer be available. *" " “ ” marks in Remarks indicate languages of instruction manuals. [ :English/Spanish/French/German/Netherlands/Swedish/Italian/Danish, :English/ Chinese] 49 Ref. No. Part No. Part Name & Description Pcs Remarks 1 RGU1915-S1 OPERATION BUTTON 1 (S) 1 RGU1915-D2 OPERATION BUTTON 1 (W) 2 RHQ0083-S SCREW 6 3 RJB2280A OPERATION FPC 1 4 RMN0613 LCD HOLDER 1 5 RMQ0916 TAPE 1 6 RMZ0533 INSULATING SHEET 1 7 RXM0072 LINK UNIT 1 8 RYF0560-S DISC COVER 1 (S) 8 RYF0560-W DISC COVER 1 (W) 8-1 RGV0266-S REC KNOB 1 8-2 RMA1378 REC LEVER 1 9 XQN14+B2FC SCREW 1 10 RYK1030A-S CABINET ASS'Y 1 (EB)(EG) 10 RYK1030B-S CABINET ASS'Y 1 (GH-S) 10 RYK1030B-W CABINET ASS'Y 1 (GH-W) 10-1 RGV0265-S2 HOLD KNOB 1 11 RYK1031-S1 INTERMEDIATE CABINET 1 11-1 RGV0264-S OPEN KNOB 1 12 RHD14076-S SCREW 6 13 RKK0140-S RECHARGEABLE BATT.COVER 1 (S) 13 RKK0140-W RECHARGEABLE BATT.COVER 1 (W) 14 REJ0150 R.BATT.TERMINAL(+) 1 15 RMX0186 JACK SHEET 1 16 RHD14067 SCREW 5 17 RAE1630Z-M MECHANISM UNIT 1 17-1 RDG0481 INTERMEDIATE GEAR 1 17-2 RHD14078 SCREW 1 17-3 RHD14080 SCREW 1 17-4 RHW11011 WASHER 1 17-5 RMC0409 SPRING 1 17-6 RXJ0028 DRIVE SHAFT 1 17-7 BRL1A1CWC TRAVERSE MOTOR 1 17-8 BTL2A1CRD SPRING MOTOR 1 17-9 RHD14067 SCREW 3 17-10 RHD14082 SCREW 1 17-11 RJC99040 R.BATT.TERMINAL(-) 1 17-12 RMA1364 HOLDER ANGEL 1 17-13 RMB0655-2 DETECT LEVER SPRING 1 17-14 RMK0463 TRAVERSE CHASSIS 1 17-15 RMX0156-1 STOPPER RUBBER 4 17-16 RMX0162 SPACER 1 17-17 RMZ0535 INSULATING SHEET 1 17-18 RXA0183 DETECTION LEVER UNIT 1 17-19 XQN14+B2FC SCREW 1 17-20 XQN14+C12FZ SCREW 2 17-21 BRL1A1CWD LIFT MOTOR 1 17-22 RDG0482 REDUCTION GEAR 1 17-23 RHW06001 WASHER 1 17-24 RMB0650 EJECT SPRING 1 17-25 RMC0232 DRIVE ROD 1 17-26 RML0586-1 LIFTER 1 17-27 RML0587 LINK 1 50 Ref. No. Part No. Part Name & Description Pcs Remarks 17-28 RMM0230 EJECT ROD A 1 17-29 RMQ0958-2 ARM 1 17-30 RXG0050 TRANSFER GEAR 1 17-31 RXK0318 HOLDER UNIT 1 17-32 RXM0071 EJECT ROD B 1 17-33 XQN14+A12FC SCREW 2 17-34 RMX0194 SHEET 1 18 RMX0190 SPACER 1 19 RMG0534-K SHEET 1 20 RMX0187 HOLDER SPACER 2 A1 RFKFHFAZ01EM RECHARGEABLE BATT.ASS'Y 1 A1-1 RFA0475-Q RECHARGEABLE BATT.CASE 1 A2 RFA1537-S EXTERNAL BATTERY CASE 1 A3 RFC0056-K CARRYING CASE 1 A4 N0JCAD000001 AC ADAPTOR 1 (EG) A4 RFEA003B-S AC ADAPTOR 1 (EB) A4 RFEA004H-S AC ADAPTOR 1 (GH) A5 N2QCBD000007 WIRED REMOTE CONTROL 1 A5-1 RYQ0312-H REMOCON.CLIP 1 A6 RFEV335P-SA STEREO EARPHONES 1 A7 K2KA39B00001 LINE CABLE 1 A8 RQA0117 WARRANTY CARD 1 (EB)(EG) A9 RQT5606-E INSTRUCTION MANUAL 1 (EB)(EG) A9 RQT5607-G INSTRUCTION MANUAL 1 (GH) A10 RQCB0169 SERVICE CENTER LIST 1 C1 ECUE1H221KBQ 50V 220P 1 F1G1H221A402 C2,C3 ECUVNA224KBV 10V 0.22U 2 F1H1A224A028 C5,C6 RCST0GZ106RG 4V 10U 2 F3E0G106A002 C7 ECUENA104KBQ 10V 0.1U 1 F1G1A104A014 C8 ECUE1C153KBQ 16V 0.015U 1 F1G1C153A044 C10 ECUE1H181KBQ 50V 180P 1 C14 ECUVNA224KBV 10V 0.22U 1 F1H1A224A028 C15 ECUVNJ105KBV 63V 1U 1 F1H0J105A002 C16 ECUE1H181KBQ 50V 180P 1 C17 ECUE1C223KBQ 16V 0.022U 1 C18 ECUE1H101KBQ 50V 100P 1 C19-21 ECUE1H102KBQ 50V 1000P 3 C22 ECUE1E682KBQ 25V 6800P 1 C23 ECUENA393KBQ 10V 0.039U 1 F1G1A393A014 C24 ECUE1E332KBQ 25V 3300P 1 F1G1E3320001 C27 ECUENA104KBQ 10V 0.1U 1 F1G1A104A014 C28 ECUE1E332KBQ 25V 3300P 1 F1G1E3320001 C29-32 ECUE1H102KBQ 50V 1000P 4 F1G1H102A457 C33 ECUVNA224KBV 10V 0.22U 1 F1H1A224A028 C34 ECUE1C103KBQ 16V 0.01U 1 C35 ECUE1C123KBQ 16V 0.012U 1 C36,37 ECUV1C823KBV 16V 0.082U 2 C38 ECUENA104KBQ 10V 0.1U 1 F1G1A104A014 C39 RCST0GZ106RG 4V 10U 1 F3E0G106A002 C40 ECUE1H102KBQ 50V 1000P 1 F1G1H102A457 C41 ECUE1C183KBQ 16V 0.018U 1 51 L0BAB0000118 F1G1C223A044 F1G1H102A457 F1G1C1230001 Ref. No. Part No. Part Name & Description Pcs Remarks C42 ECUV0J474KBV 6.3V 0.47U 1 F1H0J474A002 C44 ECUE1E332KBQ 25V 3300P 1 F1G1E3320001 C101 RCST0GZ106RG 4V 10U 1 F3E0G106A002 C102 ECUENA104KBQ 10V 0.1U 1 F1G1A104A014 C104 ECUE1H102KBQ 50V 1000P 1 F1G1H102A457 C105 ECUE1C103KBQ 16V 0.01U 1 C107 RCST0GZ106RG 4V 10U 1 F3E0G106A002 C108 ECUENA104KBQ 10V 0.1U 1 F1G1A104A014 C109 RCST0GZ106RG 4V 10U 1 F3E0G106A002 C111 ECUENA104KBQ 10V 0.1U 1 F1G1A104A014 C112,13 ECUE1H100DCQ 50V 10P 2 F1G1H100A420 C115 ECUE1C123KBQ 16V 0.012U 1 F1G1C1230001 C116 ECUE1H221KBQ 50V 220P 1 F1G1H221A402 C117 ECUENA473KBQ 10V 0.047U 1 F1G1A473A014 C118 ECUENA104KBQ 10V 0.1U 1 F1G1A104A014 C201 ECUENA104KBQ 10V 0.1U 1 F1G1A104A014 C202 RCST0GZ475RG 4V 4.7U 1 F3E0G475A002 C203 ECUVNJ105KBV 63V 1U 1 F1H0J105A002 C204 RCST0GZ475RG 4V 4.7U 1 F3E0G475A002 C205 RCST0GZ106RG 4V 10U 1 F3E0G106A002 C206 ECUV0J334KBV 16V 0.33U 1 C207 RCST0GZ475RG 4V 4.7U 1 C208 ECUV0J334KBV 16V 0.33U 1 C209 ECUENA104KBQ 10V 0.1U 1 F1G1A104A014 C210 RCST0GZ106RG 4V 10U 1 F3E0G106A002 C211-13 ECUENA104KBQ 10V 0.1U 3 F1G1A104A014 C214,15 RCST0EX227RE 2.5V 220U 2 F3G0E2270001 C218 ECUE1H101KBQ 50V 100P 1 C219,20 ECUE1H102KBQ 50V 1000P 2 F1G1H102A457 C221 ECUENA104KBQ 10V 0.1U 1 F1G1A104A014 C301 RCST0JX107RG 6.3V 100U 1 F3G0J1070002 C303 RCST0EX227RE 2.5V 220U 1 F3G0E2270001 C305 RCST0GZ226RG 4V 22U 1 F3E0G226A002 C306 ECUENA104KBQ 10V 0.1U 1 F1G1A104A014 C307 RCST0EC397RE 2.5V 390U 1 F3H0J397A012 C308 ECUENA104KBQ 10V 0.1U 1 F1G1A104A014 C309 ECUE1C103KBQ 16V 0.01U 1 C310 ECUENA104KBQ 10V 0.1U 1 F1G1A104A014 C312 ECUENA104KBQ 10V 0.1U 1 F1G1A104A014 C313 ECUE1C103KBQ 16V 0.01U 1 C315 ECUENA104KBQ 10V 0.1U 1 F1G1A104A014 C316 ECUVNJ105KBV 63V 1U 1 F1H0J105A002 C317 ECUVNJ475MBN 63V 4.7U 1 F1J0J4750002 C318 ECUENA104KBQ 10V 0.1U 1 F1G1A104A014 C401 ECUVNA224KBV 10V 0.22U 1 F1H1A224A028 C402 ECUENA473KBQ 10V 0.047U 1 F1G1A473A014 C403 ECUVNA224KBV 10V 0.22U 1 F1H1A224A028 C404 ECUVNC104KBV 16V 0.1U 1 C405 RCST0GZ226RG 4V 22U 1 F3E0G226A002 C407 RCST0GZ106RG 4V 10U 1 F3E0G106A002 C408-11 ECUENA104KBQ 10V 0.1U 4 F1G1A104A014 C416-18 ECUE1H222KBQ 50V 2200P 3 F1G1H222A457 C423 RCST0GZ226RG 4V 22U 1 F3E0G226A002 C424 ECUVNJ105KBV 63V 1U 1 F1H0J105A002 52 F3E0G475A002 Ref. No. Part No. Part Name & Description Pcs Remarks C425,26 ECUENC273KBQ 16V 0.027U 2 C427 ECUV0J334KBV 16V 0.33U 1 C432-35 ECUE1C103KBQ 16V 0.01U 4 C441 RCST0GZ106RG 4V 10U 1 F3E0G106A002 C442 ECUENA104KBQ 10V 0.1U 1 F1G1A104A014 C443 ECUENA473KBQ 10V 0.047U 1 F1G1A473A014 C444 ECUENA104KBQ 10V 0.1U 1 F1G1A104A014 C445 ECUE1H150JCQ 50V 15P 1 C501 ECUE1H101KBQ 50V 100P 1 C502 ECUENA104KBQ 10V 0.1U 1 C503 ECUE1C103KBQ 16V 0.01U 1 C504 ECUE1H102KBQ 50V 1000P 1 F1G1H102A457 C505 RCST0GZ226RG 4V 22U 1 F3E0G226A002 C506 ECUENA104KBQ 10V 0.1U 1 F1G1A104A014 C507 ECUE1C103KBQ 16V 0.01U 1 C508 ECUV0J474KBV 6.3V 0.47U 1 C509 ECUE1C103KBQ 16V 0.01U 1 C511,12 ECUE1H270JCQ 50V 27P 2 F1G1H270A422 C516 ECUVNJ105KBV 63V 1U 1 F1H0J105A002 C601 ECUE1H470JCQ 50V 47P 1 F1G1H470A422 C606,07 ECUE1E121KBQ 25V 120P 2 C608 RCST0GZ106RG 4V 10U 1 F3E0G106A002 C609 ECUENA104KBQ 10V 0.1U 1 F1G1A104A014 C610 RCST0GZ475RG 4V 4.7U 1 F3E0G475A002 C611 ECUENA104KBQ 10V 0.1U 1 F1G1A104A014 C614,15 ECUVNJ105KBV 63V 1U 2 F1H0J105A002 C701 ECUENA104KBQ 10V 0.1U 1 F1G1A104A014 C702,03 ECUE1C103KBQ 16V 0.01U 2 C704 ECUVNA224KBV 10V 0.22U 1 F1H1A224A028 C705 RCST0GZ106RG 4V 10U 1 F3E0G106A002 C706 ECUVNA224KBV 10V 0.22U 1 F1H1A224A028 C707 RCST0GZ106RG 4V 10U 1 F3E0G106A002 C708,09 RCST0GZ335RE 4V 3.3V 2 F3E0G335A001 C710,11 ECUVNA224KBV 10V 0.22U 2 F1H1A224A028 C712 RCST0GZ335RE 4V 3.3V 1 F3E0G335A001 C713 RCST0GY106RG 4V 10U 1 F3F0G1060003 C714 RCST0GY226RG 4V 22U 1 F3F0G2260002 C715 RCST0GZ226RG 4V 22U 1 F3E0G226A002 C716 ECUENA104KBQ 10V 0.1U 1 F1G1A104A014 C717 RCST0GZ225RG 4V 2.2U 1 F3E0G225A002 C718 RCST0GY106RG 4V 10U 1 F3F0G1060003 C720 ECUENA104KBQ 10V 0.1U 1 F1G1A104A014 C801 ECUENC333KBQ 16V 0.033U 1 F1G1C333A004 C802 ECUE1E472KBQ 25V 4700P 1 F1G1E4720004 C803 ECUE1C103KBQ 16V 0.01U 1 CN1 K1MN26B00047 CONNECTOR(26P) 1 CN2 K1MN06B00069 CONNECTOR(6P) 1 CN3 K1MN04B00034 CONNECTOR(4P) 1 CN402 K1MN10B00064 CONNECTOR(10P) 1 CN403,04 K1MN04B00034 CONNECTOR(4P) 2 CN701 K1MN13B00043 CONNECTOR(13P) 1 CP801 K1MN13B00042 CONNECTOR(13P) 1 CP802 K1MN07B00049 CONNECTOR(7P) 1 53 F1G1C273A004 F1G1A104A014 F1H0J474A002 Ref. No. Part No. Part Name & Description Pcs Remarks CP803 K1MN05B00042 CONNECTOR(5P) 1 D1 MA2S111TX DIODE 1 MA2S11100L D301 MA133TX DIODE 1 MA3S13300L D303-05 B0JCMC000006 DIODE 3 D401,02 ZHCS1006TA DIODE 2 B0JCLG000001 D403,04 MA133TX DIODE 2 MA3S13300L D501,02 MA741WATX DIODE 2 MA3J741D0L IC1 AN8772FHKEBV IC 1 IC101 MN66616RB2 IC 1 IC102 MNA7400CWA1T IC 1 IC201 TA2131FL IC 1 IC301 NJU7015RTE1 IC 1 IC302 C0DBAFZ00016 IC 1 IC303 XC6367A151MR IC 1 IC304 C0DBAGZ00006 IC 1 IC401 C0GBE0000003 IC 1 IC402 BD6605KVT IC 1 IC403 C0JBAB000373 IC 1 IC404 B1MBBDA00002 IC 1 IC405 B1MBBLA00001 IC 1 IC501 MN101C32GAD IC 1 IC502 AK93C45BH-L IC 1 IC503 C0EBC0000032 IC 1 IC601 C0FBZH000011 IC 1 IC701 AN7635SH-E1 IC 1 JK201 K2HC106D0001 JACK,HEADPHONES 1 JK301 RJJ43K10-H JACK,DC IN 1 K2EA2B000003 JK701 RJJ38TW01-H JACK,OPT/LINE IN 1 B3MBZ0000002 JK702 RJJ34R01-1H JACK,MIC 1 K2HC103E0012 L1 RLQP100MT-W COIL 1 G1C100M00016 L101 RLQP100MT-W COIL 1 G1C100M00016 L103,04 ERJ8GEY0R00V COIL 2 L201,02 RLBV601V-W COIL 2 L203 ERJ8GEY0R00V COIL 1 L301 G1A220E00006 COIL 1 L302 G1A100F00002 COIL 1 L303 ELJEA470KF COIL 1 L305 RLM9Z006T-D COIL 1 L402 ERJ8GEY0R00V COIL 1 L407 ELJEA470KF COIL 1 L501 RLQP100MT-W COIL 1 G1C100M00016 L701-03 RLBV601V-W COIL 3 J0JCC0000059 L705,06 J0JAC0000009 COIL 2 LCD801 L5DCADC00008 LCD 1 P1 RPK1473 PACKING CASE 1 (S) P1 RPK1528 PACKING CASE 1 (W) P2 RPQ0991 PAD 1 54 C0ABHA000012 C0DBAFZ00012 C1BB00000481 C3EBCG000028 J0JCC0000059 Ref. No. Part No. Part Name & Description Pcs Remarks P3 RPF0257-1 PROTECTION BAG 1 P4 RPQ1004-1 TRANSPORT SPACER 1 PCB1 REP3036A-M REC.HEAD P.C.B. 1 (RTL) PCB2 REP3038B-M MAIN P.C.B. 1 (RTL) PCB3 REP3039A-S OPERATION P.C.B. 1 (RTL) Q1 2SB1295-6-TB TRANSISTOR 1 B1ADKB000001 Q2 2SB1462STX TRANSISTOR 1 2SB14620SL Q202 2SB1295-6-TB TRANSISTOR 1 B1ADKB000001 Q203 B1ABDF000001 TRANSISTOR 1 Q301 B1ABDF000001 TRANSISTOR 1 Q302 XP151A12A2MR TRANSISTOR 1 B1DFBC000002 Q303 XP4601TX TRANSISTOR 1 XP0460100L Q304 XP161A1355PR TRANSISTOR 1 B1DFDC000003 Q305 XP152A12C0MR TRANSISTOR 1 B1DHAC000002 Q306,07 XP151A13A0MR TRANSISTOR 2 B1DFBC000003 Q308 2SB1462STX TRANSISTOR 1 2SB14620SL Q309 XP151A13A0MR TRANSISTOR 1 B1DFBC000003 Q310 DTC144TETL TRANSISTOR 1 B1GBCFNA0001 Q311 2SD1979TX TRANSISTOR 1 2SD1979 Q312,13 XP152A12C0MR TRANSISTOR 2 B1DHAC000002 Q314 DTC144EETL TRANSISTOR 1 B1GBCFNN0001 Q315 XP152A12C0MR TRANSISTOR 1 B1DHAC000002 Q401 DTC144EETL TRANSISTOR 1 B1GBCFNN0001 Q701 XP4601TX TRANSISTOR 1 XP0460100L Q703 UMG2NTR TRANSISTOR 1 B1GFCFNN0010 Q705 B1ABDF000001 TRANSISTOR 1 R1 ERJ2GEJ472X 1/4W 4.7K 1 ERJ2RMJ472X R2 ERJ2GEJ272X 1/4W 2.7K 1 ERJ2RMJ272X R5 ERJ2GEJ103X 1/4W 10K 1 ERJ2RMJ103X R10 ERJ2GEJ1R0X 1/4W 1 1 ERJ2RMJ1R0X R11 EXB24V103JX 1/4W 10K 1 R14 ERJ2GEJ471X 1/4W 470 1 ERJ2RMJ471X R15 ERJ2GEJ473X 1/4W 47K 1 ERJ2RMJ473X R16 ERJ2GEJ222X 1/4W 2.2K 1 ERJ2RMJ222X R18 ERJ2GEJ474X 1/4W 470K 1 ERJ2RMJ474X R20 EXB24V104JX 1/16W 100K 1 R21 ERJ2GEJ223X 1/4W 22K 1 ERJ2RMJ223X R22 ERJ2GEJ102X 1/4W 1K 1 ERJ2RMJ102X R23 ERJ2GEJ473X 1/4W 47K 1 ERJ2RMJ473X R24 EXB24V272JX 1/16W 2.7K 1 R25 ERJ2GEJ563X 1/4W 56K 1 R29 ERJ2GEJ333X 1/4W 33K 1 R30 EXB24V473JX 1/16W 47K 1 R32 EXB24V473JX 1/16W 47K 1 R34 ERJ2GEJ223X 1/4W 22K 1 ERJ2RMJ223X R35 ERJ2GEJ473X 1/4W 47K 1 ERJ2RMJ473X R107 ERJ2GEJ105X 1/4W 1M 1 D0GA105JA001 R108 ERJ2GEJ223X 1/4W 22K 1 ERJ2RMJ223X R110 ERJ2GEJ333X 1/4W 33K 1 ERJ2RMJ333X R111 ERJ2GEJ682X 1/4W 6.8K 1 ERJ2RMJ682X R113 ERJ2GEJ102X 1/4W 1K 1 ERJ2RMJ102X 55 ERJ2RMJ333X Ref. No. Part No. Part Name & Description Pcs Remarks R114 ERJ2GEJ473X 1/4W 47K 1 ERJ2RMJ473X R201 ERJ2GEJ104X 1/4W 100K 1 ERJ2RMJ104X R202 ERJ2GEJ221X 1/4W 220 1 ERJ2RMJ221X R203 ERJ2GEJ102X 1/4W 1K 1 ERJ2RMJ102X R204 EXB24V225JX 1/16W 2.2M 1 R205 ERJ2GEJ222X 1/4W 2.2K 1 R206 EXB24V100JX 1/16W 10 1 R207 ERJ2GEJ471X 1/4W 470 1 ERJ2RMJ471X R208 ERJ2GED273X 1/4W 27K 1 ERJ2RHD273X R209 EXB28V103JX 1/32W 10K 1 R211 EXB24V332JX 1/16W 3.3K 1 R212,13 ERJ2GEJ221X 1/4W 220 2 R301 EXB24V334JX 1/16W 330K 1 R302 EXB24V104JX 1/16W 100K 1 R303 ERJ2RHD223X 1/4W 22K 1 R304 ERJ2GEJ103X 1/4W 10K 1 ERJ2RMJ103X R305 ERJ2GEJ474X 1/4W 470K 1 ERJ2RMJ474X R306 ERJ2GEJ103X 1/4W 10K 1 ERJ2RMJ103X R308 EXB24V474JX 1/16W 470K 1 R309 ERJ2GEJ394X 1/4W 390K 1 R310 ERJ2GED563X 1/4W 56K 1 R311 ERJ2GED683X 1/4W 68K 1 ERJ2RHD683X R312 ERJ2GED105X 1/4W 1M 1 ERJ2RKD105X R313 EXB24V104JX 1/16W 100K 1 R314 ERJ2GEJ154X 1/4W 150K 1 ERJ2RMJ154X R315 ERJ2GED104X 1/4W 100K 1 D0HA104ZA002 R316 ERJ2GEJ104X 1/4W 100K 1 ERJ2RMJ104X R317 ERJ6RSJR10V 1/10W 0.1 1 R318 ERJ2GED105X 1/4W 1M 1 ERJ2RKD105X R320 ERJ2GEJ474X 1/4W 470K 1 ERJ2RMJ474X R321 ERJ2GEJ394X 1/4W 390K 1 ERJ2RMJ394X R322 ERJ2GEJ225X 1/4W 2.2M 1 ERJ2RMJ225X R323 ERJ2GED105X 1/4W 1M 1 ERJ2RKD105X R324,25 ERJ2GEJ474X 1/4W 470K 2 ERJ2RMJ474X R326 ERJ2GEJ221X 1/4W 220 1 ERJ2RMJ221X R327 ERJ2GEJ474X 1/4W 470K 1 ERJ2RMJ474X R401 ERJ2GEJ6R8X 1/4W 6.8 1 R402 ERJ2GEJ103X 1/4W 10K 1 R403 EXB24V473JX 1/16W 47K 1 R406 EXB24V473JX 1/16W 47K 1 R408 ERJ2GEJ472X 1/4W 4.7K 1 ERJ2RMJ472X R410 ERJ2GEJ153X 1/4W 15K 1 ERJ2RMJ153X R411 ERJ2GEJ682X 1/4W 6.8K 1 ERJ2RMJ682X R412 ERJ2GEJ182X 1/4W 1.8K 1 ERJ2RMJ182X R413 ERJ2GEJ471X 1/4W 470 1 ERJ2RMJ471X R414 ERJ2GEJ102X 1/4W 1K 1 ERJ2RMJ102X R501 ERJ2GEJ473X 1/4W 47K 1 ERJ2RMJ473X R502 ERJ2GEJ103X 1/4W 10K 1 ERJ2RMJ103X R504 EXB28V334JX 1/32W 330K 1 R506 ERJ2GEJ103X 1/4W 10K 1 R507 EXB28V224JX 1/32W 220K 1 R509 ERJ2GEJ223X 1/4W 22K 1 R513 EXB28V334JX 1/32W 330K 1 R516 ERJ2GEJ221X 1/4W 220 1 56 ERJ2RMJ222X ERJ2RMJ221X ERJ2RMJ394X ERJ2RMJ103X ERJ2RMJ103X ERJ2RMJ223X ERJ2RMJ221X Ref. No. Part No. Part Name & Description Pcs Remarks R518 EXB28V104JX 1/32W 100K 1 R602 ERJ2GEJ5R6X 1/4W 5.6 1 R603 EXB24V123JX 1/16W 12K 1 R604 ERJ2GEJ470X 1/4W 47 1 R605 EXB28V470JX 1/32W 47 1 R701 ERJ2GEJ102X 1/4W 1K 1 ERJ2RMJ102X R702 ERJ2GEJ103X 1/4W 10K 1 ERJ2RMJ103X R703 EXB24V104JX 1/16W 100K 1 R704 EXB24V333JX 1/16W 33K 1 R705 EXB24V102JX 1/16W 1K 1 R706 EXB24V471JX 1/16W 470 1 R707 ERJ2GEJ394X 1/4W 390K 1 R708 EXB24V104JX 1/16W 100K 1 R709 ERJ2GEJ473X 1/4W 47K 1 ERJ2RMJ473X R710 ERJ2GEJ470X 1/4W 47 1 ERJ2RMJ470X R712 ERJ2GEJ104X 1/4W 100K 1 ERJ2RMJ104X R713 ERJ2GEJ101X 1/4W 100 1 ERJ2RMJ101X R714 ERJ2GEJ473X 1/4W 47K 1 ERJ2RMJ473X R715 ERJ2GEJ155X 1/4W 1.5M 1 R716 EXB24V103JX 1/4W 10K 1 R717 EXB24V223JX 1/4W 22K 1 R801 ERJ3GEYJ222V 1/16W 2.2K 1 R802 ERJ3GEYJ472V 1/16W 4.7K 1 D0GB472JA002 R803 ERJ3GEYJ822V 1/16W 8.2K 1 D0GB822JA002 R804 ERJ3GEYJ273V 1/16W 27K 1 D0GB273JA002 R807 ERJ2GEJ473X 1/4W 47K 1 ERJ2RMJ473X R808 ERJ2GEJ563X 1/4W 56K 1 RX103 ERJ2GEJ103X 1/4W 10K 1 ERJ2RMJ103X RX503 ERJ2GEJ334X 1/4W 330K 1 ERJ2RMJ334X S1 ABC1111P SW,MAGNETIC HEAD 1 K0L1BA000050 S501 RSH1A039-A SW,OPEN DET. 1 K0L1BA000037 S502 K0D112A00114 SW,HOLD 1 S503 RSH1A039-A SW,PROTECT 1 S801 RSG0051-P SW,PLAY/PAUSE,CHARA 1 S802 K0F111A00335 SW,REC 1 S803-07 RSG0051-P SW,PUSH 5 TH1 RRSP33J103CW THERMISTOR 1 D4CC11730001 TH401 RRSP33J103CW THERMISTOR 1 D4CC11730001 X101 H0J169500013 OSCILLATOR 1 X501 H2C100500005 OSCILLATOR 1 Z301 RJH9209-1 BATT.CASE CONNECT.TERMINA 1 19. Cabinet Parts Location 57 ERJ2RMJ5R6X ERJ2RMJ470X ERJ2RMJ394X K0L1BA000037 K4BC02E00005 20. Packaging 58 Printed in Japan (H000900000) SW/HH 59
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Title :EXIF Metadata provided by EXIF.toolsAuthor : lindemannr Creator : pdfFactory Pro http://www.fineprint.com Producer : pdfFactory Pro v1.54 (Windows 2000) Create Date : 2003:08:13 11:04:17 Page Count : 59