Sharp 29LF 92E Service Manual. Www.s Manuals.com. Ak 45 Manual
User Manual: TV Sharp 29LF-92E, AK-45 Chassis - Service manuals and Schematics. Free.
Open the PDF directly: View PDF .
Page Count: 80
Download | ![]() |
Open PDF In Browser | View PDF |
29LF-92E SERVICE MANUAL SE0029LF92E00 Issued: 28th July 2004 AK- 45 CHASSIS PAL B/G / SECAM L/L’, B/G, D/K SYSTEM COLOUR TELEVISION MODEL 29LF-92EC/IT In the interests of user safety (required by safety regulations in some countries) the set should be restored to its original condition and only parts identical to those specified should be used. In order to service the model 29LF-92E, refer to the AK-45 Chassis Service Manual (SE00AK45CHA00). CONTENTS ELECTRICAL SPECIFICATIONS ........................................................................................ 3 IMPORTANT SERVICING NOTES ...................................................................................... 4 CONTROLS & TERMINALS ................................................................................................ 5 PRINTED WIRING BOARD LAYOUT ................................................................................. 7 PARTS LISTING ................................................................................................................... 8 HOW TO UPDATE THE TECHNICAL INFORMATION ...................................................... 15 SHARP CORPORATION 1 This document has been published to be used for after sales service only. 29LF-92E SERVICE MANUAL UPDATE LOG SHEET Technical Report No. Technical Bulletin No. Cause / Solution Part No. Page No. Application Data /Serial No. Use this page to keep any special servicing information as Technical Report (Bulletin), Technical Information, etc. If only part number changes are required, just change part number directly the part number in the Parts Listing Section. If you need more information, please refer to the Technical Report (Bulletin). 2 29LF-92E ELECTRICAL SPECIFICATIONS •Power Input .................... 220V-240 Volts AC 50 Hz •Power Consumption Normal Operation (Method IEC60107) ............... 83 W Stand-by Operation .......................................... < 4 W •Audio Power Output Rating (MPO) / Impedance Internal Left Speaker ................................. 10 W, 7 Ω Internal Right Speaker ............................... 10 W, 7 Ω •Speakers Full range (2 pcs) ................................... 60 x 120 mm •Convergence (Maximum Misconvergence) mm 29” 0.4 1.0 1.0 1.5 1.3 1.3 1.0 AREA A BC DE FGHJ KLMN F’G’H’J’ STUV •Picture Intermediate frequency L’ ................................................ 33.9MHz L, B/G, D/K .............................. 38.9MHz •Sound Carrier Trap L’ ................................................ 40.4MHz L, D/K ......................................... 32.4MHz B/G ............................................ 33.4MHz •Adjacent Sound Carrier Trap L’ ................................................ 32.4MHz L, D/K, B/G ................................ 40.4MHz •Adjacent Picture Carrier Trap L’ ................................................ 41.9MHz L, D/K ...................................... 30.9MHz B/G ............................................ 31.9MHz •Aerial Input Impedance VHF/UHF ................. 75 ohm Unbalanced •Tuning Ranges ..... 45.75MHz thru 855.25 MHz VHF: S1 - S41 CH (Hiperband) E2 - E12 CH / F2 - F10 UHF: E21 - E69 CH •White Level Apply the rated voltage at the rated frequency to the TV set, while it is receiving full white pattern RF signal of 60 dB/µV from its RF input via the pattern generator. Turn all picture controls to maximum value. Measure the colour temperatures at the center of the screen by using the colour analyzer. 29LF94EC: 29LF94EIT: X=0.304 ± 0.015 X=0.290 ± 0.015 Y=0.306 Y=0.300 ± 0.015 ± 0.015 Specifications are subject to change without prior notice. MODEL DESTINATION (Operation Manual Languages) 28LF-92EC: Czech, English, Hungarian, Polish, Romanian, Russian, Slovakian 28LF-92EIT: Italiano. WARNING The chassis in this receiver is partially hot. Use an isolation transformer between the line cord plug and power receptacle, when servicing this chassis. To prevent electric shock, do not remove cover. No user-serviceable parts inside. Refer servicing to qualified service personnel. 3 29LF-92E IMPORTANT SERVICING NOTES Only qualified service personnel are allowed to carry out maintenance and repair of this receiver. Servicing of High Voltage System and CRT It is important that the static charge is removed from the high voltage system when carrying out work on the receiver. This can be achieved by connecting a 10K resistor (with a suitably insulated lead) from the CRT cavity connector to the CRT ground tag. This must be carried out with the AC supply disconnected from the receiver. Note the following: • The CRT in this receiver employs Integral Implosion Protection. • If the CRT has to be changed it MUST be replaced with the correct type for continued safe working. • DO NOT lift the CRT by its neck. • When handing the CRT, ensure that shatterproof goggles are worn. • Ensure that the CRT is discharge before handling. X-Ray This receiver is designed to keep any x-ray emission to an absolute minimum. Some fault conditions and servicing procedures may produce potentially hazardous x-ray radiation levels. This is a problem when in close proximity to the receiver for long periods of time. To reduce any risks associated with this, please observe the following precautions: 1. When undertaking any servicing on this chassis, DO NOT increase the EHT to more than 33 KV, (at a instantaneous beam current of 1800 µA). 2. Ensure that during normal operation the EHT does not exceed 29.55 KV (at a beam current of 1800 µA). This level has been preset in the factory. Always check that this level has not been exceeded after carrying out any repair on the receiver. 3. DO NOT replace the CRT with any other type than that specified in the parts listing as this may cause excessive x-ray radiation. Before returning the receiver to the customer In addition to the above checks, the following should also be carried out before returning the receiver to the customer. 1. Inspect all the leads to ensure that they are dressed correctly and that they are not obstructed or pinched by any other parts. 2. Ensure that all protective devices are in good condition. These will include nonmetallic control knobs, insulating fish papers, cabinets backs, compartment covers or shields, mechanical insulators, etc. 4 29LF-92E CONTROLS & TERMINALS 69,'(2 9,'(2 / 6* , 5' '' $ 8',2 69,'(2 9,'(2 /6*,5''' $8',2 FRONT PANEL Speakers (left + right) = Power On / Off = Volume -/+ CH = Program -/+ = Headphone 3,6 mm Ø S-VIDEO Remote Control Indicator VIDEO Sound Indicator AUDIO (L/S/G/I) = Audio left Power Indicator AUDIO (R/D/D/D) = Audio right Speaker Covers REAR TV RF Input 1. Aerial terminal (;7 21-pin In/Out (;7 2. 21-pin Audio/Video (RGB) (EXT.1) With PAL/SECAM/NTSC Video Input 3. 21-pin Audio/Video (EXT.2) With PAL/SECAM/NTSC Video Input 5 29LF-92E REMOTE CONTROL = Stand By = Cursor Up = Cursor Right OK = OK = Info (Program Menu) 0 - 9 = Direct Program -/-- = Double Digit = Wide mode button P/CH+ = Program + + = Volume + = TV / Quit Menu (;7 = EXT button (EXT-1, RGB, EXT-2, F-AV, S-VHS) Yellow = Feature Menu Blue = Installation Menu = Hold = Update = Index Page = Reveal = Expand = Mix = Teletext = Time Red = Sound Menu Green = Picture Menu = Mute I-II = Mono/Stereo - Dual I-II = - Volume - P/CH = -Program = Flash back button M = Menu = Cursor Down = Cursor Left 6 29LF-92E CHASSIS LAYOUT Mother Unit CRT Unit Front AV Unit Keyboard Unit 7 TABLE OF CONTENTS 1.INTRODUCTION ........................................................................................................................ 1 2.TUNER .......................................................................................................................................... 1 3.IF PART (TDA9885/86)............................................................................................................. 1 4.VIDEO SWITCH TEA6415 ....................................................................................................... 2 5.MULTI STANDARD SOUND PROCESSOR ....................................................................... 2 6.SOUND OUTPUT STAGE WITH TDA7269A ...................................................................... 2 7.BERTICAL OUTPUT STAGE WITH STV9379FA.............................................................. 2 8.VIDEO OUTPUT AMPLIFIER TDA6108 .............................................................................. 2 9.POWER SUPPLY (SMPS) ....................................................................................................... 3 10.MICROCONTROLLER SDA55XX ....................................................................................... 3 10.1.General Features .................................................................................................................... 3 10.2.External Crystal and Programmable Clock Speed................................................................ 3 10.3.Microcontroller Features........................................................................................................ 3 10.4.Memory ................................................................................................................................... 3 10.5.Display Features..................................................................................................................... 3 10.6.Acquisition Features .............................................................................................................. 4 10.7.Ports........................................................................................................................................ 4 11.CLASS AB STEREO HEADPHONE DRIVER TDA1308 ............................................... 4 12.SAW FILTERS .......................................................................................................................... 4 13.IC DESCRIPTIONS ................................................................................................................. 5 13.1.LM317T................................................................................................................................ 5 13.1.1.Description ....................................................................................................................... 5 13.1.2.Features............................................................................................................................ 5 13.2.TDA1308T........................................................................................................................... 5 13.2.1.General Description ......................................................................................................... 5 13.2.2.Features............................................................................................................................ 5 13.2.3.Pinning ............................................................................................................................. 6 13.3.MSP34X0G (MSP3410G)................................................................................................ 6 13.3.1.Description ....................................................................................................................... 6 13.3.2.Features............................................................................................................................ 7 13.3.3.Pin connections ............................................................................................................... 7 13.4.VDP313xY .......................................................................................................................... 8 13.4.1.Introduction...................................................................................................................... 8 13.4.2.Features............................................................................................................................ 9 13.4.3.Pin Connections and short descriptions ........................................................................ 9 13.5.TEA6415C .........................................................................................................................10 13.5.1.General Description ........................................................................................................10 13.5.2.Features...........................................................................................................................10 13.5.3.Pinning ............................................................................................................................11 13.10.SDA5555..........................................................................................................................13 13.10.1.General definition..........................................................................................................13 13.10.2.Features.........................................................................................................................13 13.11.MC44608..........................................................................................................................14 13.11.1.Description ....................................................................................................................14 13.11.2.General Features...........................................................................................................15 13.11.3.Pin Connections............................................................................................................15 13.12.TCET1102G ....................................................................................................................16 13.12.1.Description ....................................................................................................................16 13.12.2.Applications ..................................................................................................................16 13.12.3.Features.........................................................................................................................16 13.13.TDA9885T .......................................................................................................................16 13.13.1.General Description ......................................................................................................16 13.13.2.Features.........................................................................................................................16 13.13.3.Pinning...........................................................................................................................17 13.14.PI5V330 ............................................................................................................................17 13.14.1.General Description ......................................................................................................17 14.AK45 CHASSIS PRODUCTION SERVICE MODE ADJUSTMENTS ........................18 14.1.SERVICE MENU .....................................................................................................................18 14.2.ADJUST MENU ......................................................................................................................18 14.3.OPTIONS MENU.....................................................................................................................30 Option 0. Video Processor Crystal Indication ..........................................................................30 Option 1. (0x01) Video Processor Decoder Mode Register......................................................30 Option 2. (0x18) Video Processor Blanking Control ................................................................30 Option 3. (0x19) Video Processor Cathode Drive Level ...........................................................31 Option 4......................................................................................................................................31 Option 5. CTI Avaliable, Mono AVL...........................................................................................31 Option 6......................................................................................................................................31 Option 7. OPTIONHOTELACTIVE, PLL_VST, PIP Zoom Mode, PIP Position...........................31 Option 8. IF Frequency ..............................................................................................................32 Option 9. Standard Available.....................................................................................................32 Option 10. Scart, Combfilter, Teletext, Language.....................................................................33 Option 11. PLL Tuner Control 1 Byte ........................................................................................33 Option 12. PLL Tuner Control 2 Low Byte ................................................................................33 Option 13. PLL Tuner Control 2 Mid Byte .................................................................................34 Option 14. PLL Tuner Control 2 High Byte ...............................................................................34 Option 15. PLL Tuner VHF LOW – VHF HIGH Crossover Low Byte.........................................34 Option 16. PLL Tuner VHF LOW – VHF HIGH Crossover High Byte........................................34 Option 17. PLL Tuner VHF HIGH – UHF Crossover Low Byte..................................................34 Option 18. PLL Tuner VHF HIGH – UHF Crossover High Byte.................................................34 Option 19. PIP PLL Tuner Control 1 Byte .................................................................................35 Option 20. PIP PLL Tuner Control 2 Low Byte..........................................................................35 Option 21. PIP PLL Tuner Control 2 Mid Byte ..........................................................................35 Option 22. PIP PLL Tuner Control 2 High Byte.........................................................................35 Option 23. PIP PLL Tuner VHF LOW – VHF HIGH Crossover Low Byte ..................................35 Option 39. Personal Preferance Equalizer Band 1 ...................................................................39 Option 40. Personal Preferance Equalizer Band 2 ...................................................................39 Option 41. Personal Preferance Equalizer Band 3 ...................................................................39 Option 42. Personal Preferance Equalizer Band 4 ...................................................................39 Option 43. Personal Preferance Equalizer Band 5 ...................................................................39 Option 44. Sound Efect (Standard; Music; Speech; Jazz; Pp).................................................39 Option 45. Volume Offset Left...................................................................................................39 Option 46. Volume Offset Right ................................................................................................39 Option 47. Volume Offset Center ..............................................................................................40 Option 48. Volume Offset Rear..................................................................................................40 Option 49. Surround Delay ........................................................................................................40 Option 50. FM Prescale..............................................................................................................40 Option 51. NICAM Prescale .......................................................................................................40 Option 52. Scart Input Prescale ................................................................................................40 Option 53. I2S Prescale .............................................................................................................40 Option 54. Scart Output Prescale..............................................................................................40 Option 55. Speaker Setup..........................................................................................................41 Option 56. Audio Options Available Or Not..............................................................................41 Option 57. Stereo Threshold .....................................................................................................41 Option 58. MSP Audio Flags......................................................................................................42 Option 59. NICAM Threshold.....................................................................................................42 Option 60. Power Delay Time ....................................................................................................42 14.4.OPTION TABLE RECOMMENDED VALUES..........................................................................45 14.5.SCREEN ADJUSTMENT (FBT SCREEN)...............................................................................47 14.6.GEOMETRY ADJUSTMENT...................................................................................................48 4:3 FORMATS.............................................................................................................................48 16:9 FORMATS...........................................................................................................................49 16.BLOCK DIAGRAM .................................................................................................................57 1.INTRODUCTION 11AK45 is a 50Hz colour television capable of driving 24” + CRT sizes( beginning from 24” 16:9 up to 33”). The chassis is capable of operation in PAL, SECAM, NTSC (playback) colour standards and multiple transmission standards as B/G, D/K, I/I’, and L/L´. Sound system output is supplying 2x10W (10%THD) for left and right outputs of 8ohm speakers. TV supports FASTTEXT. It is possible to decode transmissions including high graphical data. The chassis is equipped with three full EuroScarts, only one of them supports RGB input, one headphone output, one FAV input, one SVHS input (via SCART) 2.TUNER The hardware and software of the TV is suitable for tuners, supplied by different companies, which are selected from the Service Menu. These tuners can be combined VHF, UHF tuners suitable for CCIR 2 systems B/G, H, L, L´, I/I´, and D/K. The tuning is available through the digitally controlled I C bus (PLL). Below you will find info on one of the Tuners in use. General description of UV1316: The UV1316 tuner belongs to the UV 1300 family of tuners, which are designed to meet a wide range of applications. It is a combined VHF, UHF tuner suitable for CCIR systems B/G, H, L, L’, I and I’. The low IF output impedance has been designed for direct drive of a wide variety of SAW filters with sufficient suppression of triple transient. Features of UV1316: 1. Member of the UV1300 family small sized UHF/VHF tuners 2. Systems CCIR: B/G, H, L, L’, I and I’; OIRT: D/K 3. Digitally controlled (PLL) tuning via I2C-bus 4. Off-air channels, S-cable channels and Hyperband 5. World standardized mechanical dimensions and world standard pinning 6. Compact size 7. Complies to “CENELEC EN55020”and “EN55013” Pinning: 1. Gain control voltage (AGC) 2. Tuning voltage 3. I²C-bus address select 4. I²C-bus serial clock 5. I²C-bus serial data 6. Not connected 7. PLL supply voltage 8. ADC input 9. Tuner supply voltage 10. Symmetrical IF output 1 11. Symmetrical IF output 2 3.IF PART (TDA9885/86) : 4.0V, Max: 4.5V : : : Max: 5.5V Min:-0.3V, Max: 5.5V Min:-0.3V, Max: 5.5V : 5.0V, Min: 4.75V, Max: 5.5V : 33V, Min: 30V, Max: 35V 4.VIDEO SWITCH TEA6415 In case of three or more external sources are used, the video switch IC TEA6415 is used. The main function of this device is to switch 8 video-input sources on the 6 outputs. Each output can be switched on only one of each input. On each input an alignment of the lowest level of the signal is made (bottom of sync. top for CVBS or black level for RGB signals). Each nominal gain between any input and output is 6.5dB.For D2MAC or Chroma signal the alignment is switched off by forcing, with an external resistor bridge, 5VDC on the input. Each input can be used as a normal input or as a MAC or Chroma input (with external Resistor Bridge). All the switching possibilities are changed through the BUS. Driving 75ohm load needs an external resistor. It is possible to have the same input connected to several outputs. 5.MULTI STANDARD SOUND PROCESSOR The MSP 34x10G family of single-chip Multi-standard Sound Processors covers the sound processing of all analog TV-Standards worldwide, as well as the NICAM digital sound standards. The full TV sound processing, starting with analog sound IF signal-in, down to processed analog AF-out, is performed on a single chip. The DBX noise reduction, or alternatively, MICRONAS Noise Reduction (MNR) is performed alignment free. Other processed standards are the Japanese FM-FM multiplex standard (EIA-J) and the FM Stereo Radio standard. 6.SOUND OUTPUT STAGE WITH TDA7269A 9.POWER SUPPLY (SMPS) The DC voltages required at various parts of the chassis are provided by an SMPS transformer controlled by the IC MC44608, which is designed for driving, controlling and protecting switching transistor of SMPS. The transformer generates 145V for FBT input, +/-14V for audio amplifier, 5V and 3.3V stand by voltage and 8V, 12V and 5V supplies for other different parts of the chassis. An optocoupler is used to control the regulation of line voltage and stand-by power consumption. There is a regulation circuit in secondary side. This circuit produces a control voltage according to the changes in 145V DC voltage, via an optocoupler (TCET1102G) to pin3 of the IC. During the switch on period of the transistor, energy is stored in the transformer. During the switch off period energy is fed to the load via secondary winding. By varying switch-on time of the power transistor, it controls each portion of energy transferred to the second side such that the output voltage remains nearly independent of load variations. 10.MICROCONTROLLER SDA55XX 10.1.General Features • Feature selection via special function register • Simultaneous reception of TTX, VPS, PDC, and WSS (line 23) • Supply Voltage 2.5 and 3.3 V • ROM version package PSDIP52-2, PMQFP64-1 • Romless version package PMQFP100-2, PLCC84-2 10.2.External Crystal and Programmable Clock Speed • Single external 6MHz crystal, all necessary clocks are generated internally • CPU clock speed selectable via special function registers. • Normal Mode 33.33 MHz CPU clock, Power Save mode 8.33 MHz 10.3.Microcontroller Features • 8bit 8051 instruction set compatible CPU. • 33.33-MHz internal clock (max.) • 0.360 ms (min.) instruction cycle • Two 16-bit timers • Watchdog timer • Capture compare timer for infrared remote control decoding • Pulse width modulation unit (2 channels 14 bit, 6 channels 8 bit) • ADC (4 channels, 8 bit) • UART (rxd, txd) 10.4.Memory • Non-multiplexed 8-bit data and 16 … 20-bit address bus (ROMless Version) • Memory banking up to 1Mbyte (Romless version) • Up to 128 Kilobyte on Chip Program ROM • Eight 16-bit data pointer registers (DPTR) • 256-bytes on-chip Processor Internal RAM (IRAM) • 128bytes extended stack memory. • Display RAM and TXT/VPS/PDC/WSS-Acquisition-Buffer directly accessible via MOVX • Up to 16 Colours per DRCS Character • One out of Eight Colours for Foreground and Background Colours for 1-bit DRCS and ROM Characters • Shadowing • Contrast Reduction • Pixel by Pixel Shiftable Cursor With up to 4 Different Colours • Support of Progressive Scan and 100 Hz. • 3 X 4Bits RGB-DACs On-Chip • Free Programmable Pixel Clock from 10 MHz to 32MHz • Pixel Clock Independent from CPU Clock • Multinorm H/V-Display Synchronization in Master or Slave Mode 10.6.Acquisition Features • Multi-standard Digital Data Slicer • Parallel Multi-norm Slicing (TTX, VPS, WSS, CC, G+) • Four Different Framing Codes Available • Data Caption only limited by available Memory • Programmable VBI-buffer • Full Channel Data Slicing Supported • Fully Digital Signal Processing • Noise Measurement and Controlled Noise Compensation • Attenuation Measurement and Compensation • Group Delay Measurement and Compensation • Exact Decoding of Echo Disturbed Signals 10.7.Ports • One 8-bit I/O-port with open drain output and optional I2C Bus emulation support (Port0) • Two 8-bit multifunction I/O-ports (Port1, Port3) • One 4-bit port working as digital or analogue inputs for the ADC (Port2) • One 2-bit I/O port with secondary function (P4.2, 4.3, 4.7) • One 4-bit I/O-port with secondary function (P4.0, 4.1, 4.4) (Not available in P-SDIP 52) 11.CLASS AB STEREO HEADPHONE DRIVER TDA1308 The TDA1308 is an integrated class AB stereo headphone driver contained in a DIP8 plastic package. The device is fabricated in a 1 mm CMOS process and has been primarily developed for portable digital audio applications. 12.SAW FILTERS K3953M: Standard B/G, D/K, I, L/L’ Features TV IF filter with Nyquist slopes at 33,90 MHz and 38,90 MHz Constant group delay Suitable for CENELEC EN 55020 Terminals K9356M: Standard B/G, D/K, I, L Features TV IF audio filter with pass band for sound carriers at 32,40 MHz (D/K, L), 32,90 MHz (I) and 33,40 MHz (B/G) Terminal and Pin configuration are the same with K3953M K9656M: Standard B/G, D/K, I, L/L’ Features TV IF audio filter with two channels Channel 1 (L’) with one pass band for sound carriers at 40,40 MHz (L’) and 39,75 MHz (L’- NICAM) Channel 2 (B/G, D/K, L, I) with one pass band for sound carriers between 32,35 MHz and 33,40 MHz Terminal and Pin configuration are the same with K3953M 13.IC DESCRIPTIONS LM317T MSP3410G TEA6415 TDA7269A 24C08 MC44608 TDA9885T TDA1308T VDP3130Y STV9379FA LM7805/LM7808 SDA55XX TCET1102G 13.1.LM317T 13.1.1.Description The LM317T is an adjustable 3 terminal positive voltage regulator capable of supplying in excess of 1.5 amps over an output range of 1.25 to 37 volts. This voltage regulator is exceptionally easy to use and requires only two external resistors to set the output voltage. Further, it employs internal current limiting, thermal shutdown and safe area compensation, making it essentially blow–out proof. The LM317 serves a wide variety of applications including local, on card regulation. This device can also be used to make a programmable output regulator, or by connecting a fixed resistor between the adjustment and output, the LM317 can be used as a precision current regulator. 13.1.2.Features • Output Current in Excess of 1.5 A • Output Adjustable between 1.2 V and 37 V • Internal Thermal Overload Protection • Internal Short Circuit Current Limiting Constant with Temperature • Output Transistor Safe–Area Compensation • Floating Operation for High Voltage Applications • Available in Surface Mount D2PAK, and Standard 3–Lead Transistor Package • Low power consumption • Short-circuit resistant • High performance • high signal-to-noise ratio • High slew rate • Low distortion • Large output voltage swing. 13.2.3.Pinning SYMBOL OUTA INA(neg) INA(pos) VSS INB(pos) INB(neg) OUTB VDD PIN 1 2 3 4 5 6 7 8 DESCRIPTION Output A Inverting input A Non-inverting input A Negative supply Non-inverting input B Inverting input B Output B Positive supply 13.3.MSP34X0G (MSP3410G) 13.3.1.Description The MSP 34x0G family of single-chip Multi standard Sound Processors covers the sound processing of all analog TV-Standards worldwide, as well as the NICAM digital sound standards. The full TV sound processing, starting with analog sound IF signal-in, down to processed analog AF-out, is performed on a single chip. Figure shows a simplified functional block diagram of the MSP 34x0G. 13.3.2.Features 2 Standard Selection with single I C transmission Automatic Standard Detection of terrestrial TV standards Automatic Sound Selection (mono/stereo/bilingual), new registers MODUS, STATUS Two selectable sound IF (SIF) inputs Automatic Carrier Mute function Interrupt output programmable (indicating status change) Loudspeaker / Headphone channel with volume, balance, bass, treble, loudness AVC: Automatic Volume Correction Subwoofer output with programmable low-pass and complementary high-pass filter 5-band graphic equalizer for loudspeaker channel Spatial effect for loudspeaker channel Four Stereo SCART (line) inputs, one Mono input; two Stereo SCART outputs Complete SCART in/out switching matrix 2 2 Two I S inputs; one I S output Dolby Pro Logic with DPL 351xA coprocessor All analog FM-Stereo A2 and satellite standards; AM-SECAM L standard Simultaneous demodulation of (very) high-deviation FM-Mono and NICAM Adaptive deemphasis for satellite (Wegener-Panda, acc. to ASTRA specification) ASTRA Digital Radio (ADR) together with DRP 3510A All NICAM standards Korean FM-Stereo A2 standard 13.3.3.Pin connections NC = not connected; leave vacant LV = if not used, leave vacant X = obligatory; connect as described in circuit diagram DVSS: if not used, connect to DVSS AHVSS: connect to AHVSS Pin No. PLCC 68-pin 1 2 3 4 5 6 7 8 9 10 11 12 13 PSDIP 64-pin 16 15 14 13 12 11 10 9 8 7 6 5 PSDIP 52-pin 14 13 12 11 10 9 8 7 6 5 4 PQFP 80-pin 9 8 7 6 5 4 3 2 1 80 79 78 PLQFP 64-pin 8 7 6 5 4 3 2 1 64 63 62 61 Pin Name Type ADR_WS NC ADR_DA I2S_DA_IN1 I2S_DA_OUT I2S_WS I2S_CL I2C_DA I2C_CL NC STANDBYQ ADR_SEL D_CTR_I/O_0 OUT OUT IN OUT IN/OUT IN/OUT IN/OUT IN/OUT IN IN IN/OUT Connection (if not used) Short Description LV LV LV LV LV LV LV X X LV X X LV ADR word strobe Not connected ADR Data Output 2 I S1 data input 2 I S data output 2 I S word strobe 2 I S clock 2 I C data 2 I C data Not connected Stand-by (low-active) 2 I C bus address select D_CTR_I/O_0 27 28 - 56 55 - 45 44 - 64 63 62 61 60 59 48 47 - NC NC AVSS AVSS MONO_IN NC 29 54 43 58 46 VREFTOP 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 - 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 - 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 - 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 - SC1_IN_R SC1_IN_L ASG1 SC2_IN_R SC2_IN_L ASG2 SC3_IN_R SC3_IN_L ASG4 SC4_IN_R SC4_IN_L NC AGNDC AHVSS AHVSS NC NC CAPL_M AHVSUP CAPL_A SC1_OUT_L SC1_OUT_R VREF1 SC2_OUT_L SC2_OUT_R NC NC DACM_SUB NC DACM_L DACM_R VREF2 DACA_L DACA_R NC NC RESETQ NC NC NC I2S_DA_IN2 DVSS DVSS DVSS DVSUP DVSUP IN LV LV X X LV LV X IN IN IN IN IN IN IN IN OUT OUT OUT OUT OUT OUT OUT OUT OUT IN IN LV LV AHVSS LV LV AHVSS LV LV AHVSS LV LV LV or AHVSS X X X LV LV X X X LV LV X LV LV LV LV LV LV LV LV X LV LV LV LV X LV LV LV LV X X X X X Not connected Not connected Analog ground Analog ground Mono input Not connected Reference voltage IF A/D converter SCART 1 input, right SCART 1 input, left Analog Shield Ground 1 SCART 2 input, right SCART 2 input, left Analog Shield Ground 2 SCART 3 input, right SCART 3 input, left Analog Shield Ground 4 SCART 4 input, right SCART 4 input, left Not connected Analog reference voltage Analog ground Analog ground Not connected Not connected Volume capacitor MAIN Analog power supply 8V Volume capacitor AUX SCART output 1, left SCART output 1, right Reference ground 1 SCART output 2, left SCART output 2, right Not connected Not connected Subwoofer output Not connected Loudspeaker out, left Loudspeaker out, right Reference ground 2 Headphone out, left Headphone out, right Not connected Not connected Power-on-reset Not connected Not connected Not connected 2 I S2-data input Digital ground Digital ground Digital ground Digital power supply 5V Digital power supply 5V 13.4.2.Features Video Decoding and Processing – four CVBS, one S-VHS input, one YC R C B component input – integrated high-quality A/D converters and associated clamp and AGC circuits – adaptive 2H comb filter Y/C separator – multistandard colour decoder PAL/NTSC/SECAM including all substandards – multistandard sync decoder – automatic standard recognition – black-line detector – linear horizontal scaling (0.25...4), as well as nonlinear horizontal scaling “Panoramavision” – black-level expander – dynamic peaking – soft limiter (gamma correction) – colour transient improvement RGB Processing and Deflection – programmable RGB matrix – two analog RGB / Fastblank inputs – half-contrast switch – picture frame generator – scan velocity modulation output – high-performance H/V deflection – separate ADC for tube measurements – EHT compensation – angle and bow correction – one 20.25 MHz crystal, few external components –I2C-Bus Interface – 64-pin PSDIP package 13.4.3.Pin Connections and short descriptions NC = not connected X = obligatory; connect as described in circuit diagram OUT = Output Pin no PSDIP 64-pin 1 2 3 4 5 6 7 8 Pin name Type TEST RESQ SCL SDA GNDD HCS FSY CSY IN IN IN/OUT IN/OUT SUPPLY IN OUT OUT Connection (if not used) GNDD X X X X LV LV LV LV = if not used, leave vacant IN = Input SUPPLY = Supply Pin Short description Test Input Reset Input I2C Bus Clock I2C Bus Data Digital Ground Half Contrast Switch Input Front Sync Output Composite Sync Output 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 GNDD RSW2 RSW1 SENSE GNDM VERTQ VERT E/w XREF SVMOUT GNDAB VSUPAB ROUT GOUT BOUT VRD RIN GIN BIN FBLIN RIN2 GIN2 BIN2 FBLIN2 CLK20 HOUT XTAL 1 XTAL 2 CIN 2/CRIN CBIN GNDAF SGND VRT VSUPAF VOUT CIN1 VIN1 VIN2 VIN3 VIN4 SUPPLY OUT OUT IN SUPPLY OUT OUT OUT IN OUT SUPPLY SUPPLY OUT OUT OUT IN IN IN IN IN IN IN IN IN OUT OUT IN OUT IN SUPPLY IN IN SUPPLY OUT IN IN IN IN IN X GNDAB GNDAB GNDAB X LV LV LV X VSUPAB X X VSUPAB VSUPAB VSUPAB X GNDAB GNDAB GNDAB GNDAB GNDAB GNDAB GNDAB GNDAB LV X X X LV LV X GNDAF X X LV VRT VRT VRT VRT VRT Digital Ground Range Switch 2 for Measurement ADC Range Switch 1 for Measurement ADC Sense ADC Input Ground, MADC ýnput Inverted Vertical Sawtooth Output Vertical Sawtooth Output Vertical Parabola Output Reference Input for RGB DACs Analog Scan Velocity Modulation Output Analog Ground Backend Analog Supply Voltage (5.0V) Backend Analog Red Output Analog Green Output Analog Blue Output DAC Reference Analog Red Input Analog Green Input Analog Blue Input Fast Blank Input Analog Red Input2 Analog Green Input2 Analog Blue Input2 Fast Blank Input2 20.25 MHz System Clock Output Horizontal Drive Output Analog Crystal Input Analog Crystal Output Analog Chroma 2/Component CR Input Component CB Input Analog Ground Frontend Signal Ground for Analog Input Reference Voltage Top, Video ADC Analog Supply Voltage (5.0V) Frontend Analog Video Output Analog Chroma 1 Input Analog Video 1 Input Analog Video 2 Input Analog Video 3 Input Analog Video 4 Input 13.5.TEA6415C 13.5.1.General Description The main function of the IC is to switch 8 video input sources on 6 outputs. Each output can be switched on only one of each input. On each input an alignment of the lowest level of the signal is made (bottom of synch. top for CVBS or black level for RGB signals). Each nominal gain between any input and output is 6.5dB. For D2MAC or Chroma signal the alignment is switched off by forcing, with an • 6.5dB gain between any input and output • 55dB crosstalk at 5mHz • Fully ESD protected 13.5.3.Pinning 1. Input 2. Data : 3. 4. Input Clock 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. Input Input Prog Input Vcc Input Input Ground Output Output Output Output Output Output Ground Input : : : : : : : : Max : 2Vpp, Input Current: 1mA, Max : 3mA Low level : -0.3V Max: 1.5V, High level : 3.0V Max : Vcc+0.5V : Max : 2Vpp, Input Current: 1mA, Max : 3mA : Low level : -0.3V Max: 1.5V, High level : 3.0V Max : Vcc+0.5V : Max : 2Vpp, Input Current: 1mA, Max : 3mA : Max : 2Vpp, Input Current: 1mA, Max : 3mA : Max : 2Vpp, Input Current: 1mA, Max: 3mA 12V : Max : 2Vpp, Input Current: 1mA, Max : 3mA : Max : 2Vpp, Input Current: 1mA, Max : 3mA 5.5Vpp, 5.5Vpp, 5.5Vpp, 5.5Vpp, 5.5Vpp, 5.5Vpp, : Min : 4.5Vpp Min : 4.5Vpp Min : 4.5Vpp Min : 4.5Vpp Min : 4.5Vpp Min : 4.5Vpp Max : 2Vpp, Input Current : 1mA, Max : 3mA 13.6.STV9379FA 13.6.1.Description Designed for monitors and high performance TVs, the STV9379FA vertical deflection booster can handle flyback voltage up to 90V. Further to this, it is possible to have a flyback voltage, which is more than the double of the supply (Pin 2). This allows to decrease the power consumption, or to decrease the flyback time for a given supply voltage. The STV9379FA operates with supplies up to 42V and provides up to 2.6APP output current to drive the yoke. The STV9379FA is offered in HEPTAWATT package. 13.6.2.Features Power Amplifier Thermal Protection Output Current Up To 2.6APP Flyback Voltage Up To 90V (on Pin 5) Suitable For DC Coupling Application External Flyback Supply 13.7.TDA7269A 13.7.1.Description The TDA7269A is class AB dual Audio power amplifier assembled in the Multiwatt package, specially designed for high quality sound application as Hi-Fi music centers and stereo TV sets. 13.7.2.Features Wide Supply Voltage Range Up To ±20V Split Supply High Output Power 14 + 14W @THD =10%, RL =8? ,VS= +16V No Pop at Turn-On/Off Mute (Pop Free) Stand-By Feature (Low Iq) Short Circuit Protection To Gnd Thermal Overload Protection 13.8.LM7800 (LM7805/LM7808) 13.8.1.Description The L7800 series of three-terminal positive regulators is available in TO-220 TO-220FP TO-3 and D 2 PAK packages and several fixed output voltages, making it useful in a wide range of applications. These regulators can provide local on-card regulation, eliminating the distribution problems associated with single point regulation. Each type employs internal current limiting, thermal shutdown and safe area protection, making it essentially indestructible. If adequate heat sinking is provided, they can deliver over 1A output current. Although designed primarily as fixed voltage regulators, these devices can be used with external components to obtain adjustable voltages and currents. 13.8.2.Features Output Current Up To 1.5 A Output Voltages of 5; 5.2; 6; 8; 8.5; 9; 12; 15; 18; 24V Thermal Over load protection Short Circuit Protection Output Transition SOA Protection 13.9.AT24C08 13.9.1.Description The AT24C01A/02/04/08/16 provides 1024/2048/4096/8192/16384 bits of serial electrically erasable and programmable read-only memory (EEPROM) organized as 128/256/512/1024/2048 words of 8 bits each. The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operation are essential. The AT24C01A/02/04/08/16 is available in space-saving 8-pin PDIP, (AT24C01A/02/04/08/16), 8-lead TSSOP (AT24C01A/02/04/08/16) and 8-lead JEDEC SOIC (AT24C01A/02/04/08/16) packages and is accessed via a 2-wire serial interface. In addition, the entire • 8-byte Page (1K, 2K), 16-byte Page (4K, 8K, 16K) Write Modes • Partial Page Writes are Allowed • Self-timed Write Cycle (10 ms max) • High-reliability – Endurance: 1 Million Write Cycles – Data Retention: 100 Years • Automotive Grade and Extended Temperature Devices Available • 8-lead JEDEC SOIC, 8-pin PDIP and 8-lead TSSOP Packages 13.9.3.Pin Configurations Pin name A0-A2 SDA SCL WP NC Function Address Inputs Serial Data Serial Clock Input Write Protect No Connect 13.10.SDA5555 13.10.1.General definition The SDA55XX is a single chip teletext decoder for decoding World System Teletext data as well as Video Programming System (VPS), Program Delivery Control (PDC), and Wide Screen Signalling (WSS) data used for PAL plus transmissions (Line 23). The device also supports Closed caption acquisition and decoding. The device provides an integrated general-purpose, fully 8051-compatible Microcontroller with television specific hardware features. Microcontroller has been enhanced to provide powerful features such as memory banking, data pointers, and additional interrupts etc. The on-chip display unit for displaying Level 1.5 teletext data can also be used for customer defined on screen displays. Internal XRAM consists of up to 16 Kbytes. Device has an internal ROM of up to 128 KBytes. ROMless versions can access up to 1 MByte of external RAM and ROM. The SDA 55XX supports a wide range of standards including PAL, NTSC and contains a digital slicer for VPS, WSS, PDC, TTX and Closed Caption, an accelerating acquisition hardware module, a display generator for Level 1.5 TTX data and powerful On screen Display capabilities based on parallel attributes, and Pixel oriented characters (DRCS). 13.10.2.Features General • Feature selection via special function register • Simultaneous reception of TTX, VPS, PDC, and WSS (line 23) • Supply Voltage 2.5 and 3.3 V • ROM version package PSDIP52-2, PMQFP64-1 • Romless version package PMQFP100-2, PLCC84-2 External Crystal and Programmable Clock Speed • Single external 6MHz crystal, all necessary clocks are generated internally • CPU clock speed selectable via special function registers. Memory • Non-multiplexed 8-bit data and 16 … 20-bit address bus (ROMless Version) • Memory banking up to 1Mbyte (Romless version) • Up to 128 Kilobyte on Chip Program ROM • Eight 16-bit data pointer registers (DPTR) • 256-bytes on-chip Processor Internal RAM (IRAM) • 128bytes extended stack memory. • Display RAM and TXT/VPS/PDC/WSS-Acquisition-Buffer directly accessible via MOVX • UP to 16KByte on Chip Extended RAM (XRAM) consisting of; - 1 Kilobyte on-chip ACQ-buffer-RAM (access via MOVX) - 1 Kilobyte on-chip extended-RAM (XRAM, access via MOVX) for user software - 3 Kilobyte Display Memory Display Features • ROM Character Set Supports all East and West European Languages in single device • Mosaic Graphic Character Set • Parallel Display Attributes • Single/Double Width/Height of Characters • Variable Flash Rate • Programmable Screen Size (25 Rows x 33...64 Columns) • Flexible Character Matrixes (HxV) 12 x 9...16 • Up to 256 Dynamical Redefinable Characters in standard mode; 1024 Dynamical Redefinable Characters in Enhanced Mode • CLUT with up to 4096 colour combinations • Up to 16 Colours per DRCS Character • One out of Eight Colours for Foreground and Background Colours for 1-bit DRCS and ROM Characters • Shadowing • Contrast Reduction • Pixel by Pixel Shiftable Cursor With up to 4 Different Colours • Support of Progressive Scan and 100 Hz. • 3 X 4Bits RGB-DACs On-Chip • Free Programmable Pixel Clock from 10 MHz to 32MHz • Pixel Clock Independent from CPU Clock • Multinorm H/V-Display Synchronization in Master or Slave Mode Acquisition Features • Multistandard Digital Data Slicer • Parallel Multi-norm Slicing (TTX, VPS, WSS, CC, G+) • Four Different Framing Codes Available • Data Caption only Limited by available Memory • Programmable VBI-buffer • Full Channel Data Slicing Supported • Fully Digital Signal Processing • Noise Measurement and Controlled Noise Compensation • Attenuation Measurement and Compensation external components while offering a high flexibility and reliability. The device also features a very high efficiency stand–by management consisting of an effective Pulsed Mode operation. This technique enables the reduction of the stand–by power consumption to approximately 1W while delivering 300mW in a 150W SMPS. • Integrated Start–Up Current Source • Lossless Off–Line Start–Up • Direct Off–Line Operation • Fast Start–Up 13.11.2.General Features • Flexibility • Duty Cycle Control • Under voltage Lockout with Hysteresis • On Chip Oscillator Switching Frequency 40, or 75kHz • Secondary Control with Few External Components Protections • Maximum Duty Cycle Limitation • Cycle by Cycle Current Limitation • Demagnetization (Zero Current Detection) Protection • “Over VCC Protection”Against Open Loop • Programmable Low Inertia Over Voltage Protection Against Open Loop • Internal Thermal Protection GreenLineTM Controller • Pulsed Mode Techniques for a Very High Efficiency Low Power Mode • Lossless Startup • Low dV/dT for Low EMI Radiations 13.11.3.Pin Connections 13.11.4.Pin Function description Pin 1 Name Demag 2 ISENSE Description The Demag pin offers 3 different functions: Zero voltage crossing detection (50mV), 24mA current detection and 120mA current detection. The 24mA level is used to detect the secondary reconfiguration status and the 120mA level to detect an Over Voltage status called Quick OVP. The Current Sense pin senses the voltage developed on the series resistor inserted in the source of the power MOSFET. When I sense reaches 1V, the Driver output (pin 5) is disabled. This is 13.12.TCET1102G 13.12.1.Description The TCET110/ TCET2100/ TCET4100 consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 4-lead up to 16-lead plastic dual inline package. The elements are mounted on one lead frame using a coplanar technique, providing a fixed distance between input and output for highest safety requirements. 13.12.2.Applications Circuits for safe protective separation against electrical shock according to safety class II (reinforced isolation): For appl. class I – IV at mains voltage ?300 V For appl. class I – III at mains voltage ?600 V According to VDE 0884, table 2, suitable for: Switch-mode power supplies, line receiver, computer peripheral interface, microprocessor system interface. 13.12.3.Features VDE 0884 related features: Rated impulse voltage (transient overvoltage) V IOTM = 8 kV peak Isolation test voltage (partial discharge test voltage) V pd = 1.6 kV Rated isolation voltage (RMS includes DC) V IOWM = 600 V RMS (848 V peak) Rated recurring peak voltage (repetitive) V IORM = 600 V RMS General features: CTR offered in 9 groups Isolation materials according to UL94-VO Pollution degree 2 (DIN/VDE 0110 / resp. IEC 664) Climatic classification 55/100/21 (IEC 68 part 1) Special construction: Therefore, extra low coupling capacity of typical 0.2pF, high Common Mode Rejection Low temperature coefficient of CTR G = Leadform 10.16 mm; provides creepage distance > 8 mm, for TCET2100/ TCET4100 optional; suffix letter ‘G’is not marked on the optocoupler Coupling System U 13.13.TDA9885T 13.13.1.General Description The TDA9885 is an alignment-free single standard (without positive modulation) vision and sound IF signal PLL. 13.13.2.Features •5 V supply voltage •Gain controlled wide-band Vision Intermediate Frequency (VIF) amplifier (AC-coupled) •SIF AGC for gain controlled SIF amplifier; single reference QSS mixer able to operate in high performance single reference QSS mode and in intercarrier mode, switchable via I2C-bus •AM demodulator without extra reference circuit •Alignment-free selective FM-PLL demodulator with high linearity and low noise •I2C-bus control for all functions •I2C-bus transceiver with pin programmable Module Address (MAD). 13.13.3.Pinning SYMBOL VIF1 VIF2 OP1 FMPLL DEEM AFD DGND AUD TOP SDA SCL SIOMA n.c. TAGC REF VAGC CVBS AGND VPLL VP AFC OP2 SIF1 SIF2 PIN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 DESCRIPTION VIF differential input 1 VIF differential input 2 output 1 (open-collector) FM-PLL for loop filter de-emphasis output for capacitor AF decoupling input for capacitor digital ground audio output tuner AGC TakeOver Point (TOP) I2C-bus data input/output I2C-bus clock input sound intercarrier output and MAD select not connected tuner AGC output 4 MHz crystal or reference input VIF-AGC for capacitor; note 1 video output analog ground VIF-PLL for loop filter supply voltage (+5 V) AFC output output 2 (open-collector) SIF differential input 1 SIF differential input 2 13.14.PI5V330 13.14.1.General Description The PI5V330 is well suited for video applications when switching composite or RGB analog. A picturein-picture application will be described in this brief. The pixel-rate creates video overlays so two or more pictures can be viewed at the same time. An inexpensive NTSC titler can be implemented by superimposing the output of a character generator on a standard composite video background. 14.AK45 CHASSIS PRODUCTION SERVICE MODE ADJUSTMENTS 14.1.SERVICE MENU All system, geometry and white balance alignments are performed in production service mode. Before starting the production mode alignments, make sure that all manual adjustments are done correctly. To start production mode alignments enter the MAIN MENU and then press the digits 4, 7, 2 and 5 respectively or press MUTE and INFO buttons at the same time. The following first menu appears on the screen. SERVICE ADJUST... OPTIONS... AK45JA0XX AK45JA0XX You can select Adjust or Options items by pressing Up/Down buttons. Selected parameter will be highlighted. Inorder to enter the selected parameter, press Left or Right button. To exit the service menu press MENU button. Entire service menu parameters of AK45 CHASSIS are listed below. 14.2.ADJUST MENU Select the parameter by pressing up/down buttons. Adjust the parameter by pressing Left/Right buttons. In ADJUST menu, changed values are stored automatically. ADJUST... 000 001 002 003 004 005 006 007 008 009 255 036 019 020 030 026 003 004 005 005 White Point Red, White Point Green, White Point Blue: Not used. AGC Apply PAL BG signal, VHF-3 Channel-12 and 60dBµV signal level. Adjust AGC (Automatic Gain Control) item by pressing Left/Right buttons till the voltage at AGC point (pin1 of the tuner) becomes 3.0 Y-Delay SECAM Enter a SECAM B/G colour and black-white bar test pattern via RF. Adjust Y-Delay SECAM till the colour transients on the colour bar of the pattern become as sharper and colours between transients do not mix with each other as possible. Y-Delay NTSC Enter an NTSC colour and black-white bar test pattern via RF. Adjust Y-Delay NTSC till the colour transients on the colour bar of the pattern become as sharper and colours between transients do not mix with each other as possible. Y-Delay other Not used. Vertical Pozition Offset This value is fixed (127) Vertical Pozition Offset This value is fixed (127) Horizontal Pozition Offset This value is fixed (127) Horizontal Pozition Offset This value is fixed (127) Vertical Blank Start This register will be used only at 4:3 tube for 16:9 mode adjustment. It adjusts the vertical blank start position. Vertical Blank Stop This register will be used only at 4:3 tube for 16:9 mode adjustment. It adjusts the vertical blank stop position. Angle Change Angle by pressing Left/Right buttons till the vertical lines of the crosshatch pattern become completely perpendicular to horizontal lines without any angle of vertical deviation. Check and readjust ANGLE item if the adjustment becomes improper after some other geometric adjustments are done. Bow Change Bow by pressing Left/Right buttons till the vertical lines especially ones close to the left and right sides will of equal and symmetrical bending, i.e. they together will neither be towards left side nor right side. Check and readjust BOW item if the adjustment becomes improper after some other geometric adjustments are done. 4:3 Horizontal Blank Start This register will be used only at 16:9 tube for 4:3 mode adjustment. It adjusts the horizontal blank start WDR The amplitude of R of RGB output can be adjusted with the drive parameter WDR. WDG The amplitude of G of RGB output can be adjusted with the drive parameter WDG. WDB The amplitude of B of RGB output can be adjusted with the drive parameter WDB. CR The DC offset values of R of RGB output can be adjusted with the cutoff parameter CR. CG The DC offset values of G of RGB output can be adjusted with the cutoff parameter CG. CB The DC offset values of B of RGB output can be adjusted with the cutoff parameter CB. COR coring level The amplitude of the correction signal is adjustable. Small noise amplitudes in the correction signal are suppressed by an adjustable coring circuit. REGULAR VERT_POS (Regular mode Vertical Position) Enter a PAL B/G circle test pattern via RF. Change Vertical Position till the test pattern is vertically centered. Horizontal line at the center pattern is in equal distance both to upper and lower side of the picture tube. Check and readjust Vertical Position item if the adjustment becomes improper after some other geometric adjustments are done. It’s used to adjust the vertical position of regular mode. REGULAR VERT_AMPL (Regular mode Vertical Amplitude) It’s used to adjust the vertical amplitude of regular mode. REGULAR VERT_SCOR (Regular mode Vertical S-Correction) It’s used to adjust the vertical s-correction of regular mode. REGULAR VERT_SSYM(Regular mode Vertical S Symmetry) It’s used to adjust the vertical s-symetry of regular mode. REGULAR TRAPEZE (Regular mode Trapeze) Change Trapezium by pressing Left/Right buttons till vertical lines, especially lines at the sides of the picture frame became parallel to the both sides of picture tube as close as possible. Check and readjust TRPEZ item if the adjustment becomes improper after some other geometric adjustments are done. It’s used to adjust the trapeze of regular mode. REGULAR CUSHION (Regular mode Cushion) It’s used to adjust the cushion of regular mode. PANORAMIC VERT_POS (Panoramic mode Vertical Position) It’s used to adjust the vertical position of panoramic mode. PANORAMIC VERT_AMPL (Panoramic mode Vertical Amplitude) It’s used to adjust the vertical amplitude of panoramic mode. PANORAMIC VERT_SCOR (Panoramic mode Vertical S-Correction) It’s used to adjust the vertical s-correction of panoramic mode. PANORAMIC VERT_SSYM (Panoramic mode Vertical S-Symmetry) It’s used to adjust the vertical s-symmetry of panoramic mode. PANORAMIC TRAPEZE (Panoramic mode Trapeze) It’s used to adjust the trapeze of panoramic mode. PANORAMIC CUSHION (Panoramic mode Cushion) It’s used to adjust the cushion of panoramic mode. PANORAMIC HOR_COR_SYM (Panoramic mode Horizontal corner symmetry) It’s used to adjust the horizontal corners symmetry of panoramic mode. PANORAMIC HOR_CORNER (Panoramic mode Horizontal corner) It’s used to adjust the horizontal corners of panoramic mode. PANORAMIC HORZ_POS (Panoramic mode Horizontal position) It’s used to adjust the horizontal position of panoramic mode. PANORAMIC HORZ_AMPL (Panoramic mode Horizontal amplitude) It’s used to adjust the horizontal amplitude of panoramic mode. 14:9 ZOOM VERT_POS (14:9 Zoom mode Vertical Position) It’s used to adjust the vertical position of 14:9 zoom mode. 14:9 ZOOM VERT_AMPL (14:9 Zoom mode Vertical Amplitude) It’s used to adjust the vertical amplitude of 14:9 zoom mode. 14:9 ZOOM VERT_SCOR (14:9 Zoom mode Vertical S-Correction) It’s used to adjust the vertical s-correction of 14:9 zoom mode. 14:9 ZOOM VERT_SSYM (14:9 Zoom mode Vertical Symmetry) It’s used to adjust the vertical s-symmetry of 14:9 zoom mode. 14:9 ZOOM TRAPEZE (14:9 Zoom mode Trapeze) It’s used to adjust the trapeze of 14:9 zoom mode. 14:9 ZOOM CUSHION (14:9 Zoom mode Cushion) 16:9 ZOOM VERT_POS (16:9 Zoom mode Vertical Position) It’s used to adjust the vertical position of 16:9 zoom mode. 16:9 ZOOM VERT_AMPL (16:9 Zoom mode Vertical Amplitude) It’s used to adjust the vertical amplitude of 16:9 zoom mode. 16:9 ZOOM VERT_SCOR (16:9 Zoom mode Vertical S-Correction) It’s used to adjust the vertical s-correction of 16:9 zoom mode. 16:9 ZOOM VERT_SSYM (16:9 Zoom mode Vertical S-Symmetry) It’s used to adjust the vertical s-symmetry of 16:9 zoom mode. 16:9 ZOOM TRAPEZE (16:9 Zoom mode Trapeze) It’s used to adjust the trapeze of 16:9 zoom mode. 16:9 ZOOM CUSHION (16:9 Zoom mode Cushion) It’s used to adjust the cushion of 16:9 zoom mode. 16:9 ZOOM HOR_COR_SYM (16:9 Zoom mode Horizontal corner symmetry) It’s used to adjust the horizontal corners symmetry of 16:9 zoom mode. 16:9 ZOOM HOR_CORNER (16:9 Zoom mode Horizontal corner) It’s used to adjust the horizontal corners of 16:9 zoom mode. 16:9 ZOOM HORZ_POS (16:9 Zoom mode Horizontal position) It’s used to adjust the horizontal position of 16:9 zoom mode. 16:9 ZOOM HORZ_AMPL (16:9 Zoom mode Horizontal amplitude) It’s used to adjust the horizontal amplitude of 16:9 zoom mode. 16:9 ZOOM SUBTITLE VERT_POS (16:9 Zoom Subtitle mode Vertical position) It’s used to adjust the vertical position of 16:9 zoom subtitle mode. 16:9 ZOOM SUBTITLE VERT_AMPL (16:9 Zoom Subtitle mode Vertical amplitude) It’s used to adjust the vertical amplitude of 16:9 zoom subtitle mode. 16:9 ZOOM SUBTITLE VERT_SCOR (16:9 Zoom Subtitle mode Vertical S-Correction) It’s used to adjust the vertical s-correction of 16:9 zoom subtitle mode. 16:9 ZOOM SUBTITLE VERT_SSYM (16:9 Zoom Subtitle mode Vertical Symmetry) It’s used to adjust the vertical s-symmetry of 16:9 zoom subtitle mode. 16:9 ZOOM SUBTITLE TRAPEZE (16:9 Zoom Subtitle mode Trapeze) It’s used to adjust the trapeze of 16:9 zoom subtitle mode. 16:9 ZOOM SUBTITLE CUSHION (16:9 Zoom Subtitle mode Cushion) OSD Position It’s used to adjust the horizontal position of the OSD. BCLTHR Beam current threshold BCLG Beam current loop gain ROTATION (TILT) This adjustment only works when the TV has rotation option. Change TILT by pressing Left/Right buttons to rotate the complete raster clock-wise and counter clock-wise depending on the CRT. Check and readjust TRPEZ item if the adjustment becomes improper after some other geometric adjustments are done. LSLSA, LSLSB, LSL2, LSLTA, LSLTB (Luma soft limiter) LSLSA: Luma soft limiter slope A (fixed) LSLSB: Luma soft limiter slope B (fixed) LSL2: Luma soft limiter absolute limit (fixed) LSLTA: Luma soft limiter segment A tilt point (fixed) LSLTB: Luma soft limiter segment A tilt point (fixed) REFERENCE WDR RED (NORMAL) The amplitude of R of RGB output can be adjusted with the drive parameter WDR for the colour temperature of normal mode. REFERENCE WDR GREEN (NORMAL) The amplitude of G of RGB output can be adjusted with the drive parameter WDR for the colour temperature of normal mode. REFERENCE WDR BLUE (NORMAL) The amplitude of B of RGB output can be adjusted with the drive parameter WDR for the colour temperature of normal mode. REFERENCE CUTOFF RED It’s fixed. REFERENCE CUTOFF GREEN It’s fixed. REFERENCE CUTOFF BLUE It’s fixed. IBRM Internal Brightness, the brightness for measurement can be set to measure at higher cutoff current. The measurement brightness is independent of the drive values. It’s used to adjust the maximum brightness POFS2 (RGB HORIZONTAL SHIFT) It’s used to adjust the horizontal position of RGB signal. REFERENCE WDR RED COOL The amplitude of R of RGB output can be adjusted with the drive parameter WDR for the colour temp of cool mode. REFERENCE WDR GREEN COOL The amplitude of G of RGB output can be adjusted with the drive parameter WDR for the colour temp of cool mode. REFERENCE WDR BLUE COOL The amplitude of B of RGB output can be adjusted with the drive parameter WDR for the colour temp of cool mode. REFERENCE WDR RED WARM The amplitude of R of RGB output can be adjusted with the drive parameter WDR for the colour temp of warm mode. REFERENCE WDR GREEN WARM The amplitude of G of RGB output can be adjusted with the drive parameter WDR for the colour temp of cool mode. REFERENCE WDR BLUE WARM The amplitude of B of RGB output can be adjusted with the drive parameter WDR for the colour temp of cool mode. STANDARD MODE BRIGHTNESS It’s used to adjust the brightness value of standard mode. STANDARD MODE COLOUR It’s used to adjust the colour value of standard mode. STANDARD MODE CONTRAST It’s used to adjust the contrast value of standard mode. FULL VERT_POS (16:9 MODE) It’s used to adjust the vertical position of 16:9 mode (full mode). FULL VERT_AMPL It’s used to adjust the vertical amplitude of 16:9 mode (full mode). FULL VERT_SCOR It’s used to adjust the vertical s-correction of 16:9 mode (full mode). FULL VERT_SSYM FULL HORZ_POS It’s used to adjust the horizontal position of 16:9 mode (full mode). FULL HORZ_AMPL It’s used to adjust the horizontal amplitude of 16:9 mode (full mode). BRIGHT MODE BRIGHTNESS It’s used to adjust the brightness value of bright mode. BRIGHT MODE COLOUR It’s used to adjust the colour value of bright mode. BRIGHT MODE CONTRAST It’s used to adjust the contrast value of bright mode. SOFT MODE BRIGHTNESS It’s used to adjust the brightness value of soft mode. SOFT MODE COLOUR It’s used to adjust the colour value of soft mode. SOFT MODE CONTRAST It’s used to adjust the contrast value of soft mode. PERSONAL MODE FACTORY SETTING BRIGHTNESS It’s fixed. PERSONAL MODE FACTORY SETTING COLOUR It’s fixed. PERSONAL MODE FACTORY SETTING CONTRAST It’s fixed. SCINC FOR PANAROMIC MODE scaler1 coefficient, this scaler is compressing the signal. SCINC1 FOR PANAROMIC MODE scaler2 coefficient, this scaler is expanding the signal. VOLUME AFTER APS It’s used to adjust the volume level after APS. VERTICAL SCROLL It’s used to adjust the step width for scroll function. 14:9 HORIZANTAL START 14:9 RGB CUSHION It’s used to adjust the cushion in 14:9 mode for RGB signals. PANAROMIC RGB HORIZONTAL AMPLITUDE It’s used to adjust the horizontal amplitude in panoramic mode for RGB signals. 16:9 RGB HORIZANTOL AMPLITUDE It’s used to adjust the horizontal amplitude in 16:9 mode for RGB signals. 16:9 SUBTITLE RGB HORIZONTAL AMPLITUDE It’s used to adjust the horizontal amplitude in 16:9 subtitle mode for RGB signals. FULL RGB HORIZONTAL AMPLITUDE It’s used to adjust the horizontal amplitude in full mode for RGB signals. TELETEXT HORZ_POS It’s used to adjust the horizontal position of teletext signal. ADJUST EXPLANATION 000 001 002 003 White Point RED White Point GREEN Whit Point BLUE AGC (Automatic Gain Control) 004 005 006 007 008 009 010 011 012 013 014 IF-PLL Negative IF-PLL Positive Y-Delay Y-Delay SECAM Y-Delay NTSC Y-Delay OTHER Vertical Position Offset Vertical Amplitude Offset Horizontal Position Offset Horizontal Amplitude Offset Vertical Blank Start (It will be used only at 4:3 tube for 16:9 mode adjustment) Vertical Blank Stop (It will be used only at 4:3 tube for 16:9 mode adjustment) Angle Bow 4:3 Horz. Blank Start (It will be used only at 16:9 tube for 4:3 mode adjustment) 4:3 Horz. Blank Stop (It will be used only at 16:9 tube for 4:3 mode adjustment) EHTV compensation EHTTM compensation EHTEW compensation WDR WDG WDB CR CG CB COR coring level REGULAR VERT_POS (Vertical Position) REGULAR VERT_AMPL (Vertical Amplitude) REGULAR VERT_SCOR (Vertical S Correction) REGULAR VERT_SSYM (Vertical S Symmetry) 015 016 017 018 019 020 021 022 023 024 025 026 027 028 029 030 031 032 033 2835 MULTI 255 126 127 2835W MULTI - PAL I 255 036 019 20 It will be adjusted to below 1V of Max. AGC for each TV. 030 030 026 026 003 002 004 003 005 005 005 005 127 127 127 127 127 127 127 127 149 119 013 034 132 126 021 132 131 042 140 175 054 004 219 066 001 160 VIDEO PROCESSOR ADJUSTS ITSELF. 015 128 081 131 139 031 129 055 129 136 049 050 051 052 053 054 055 056 057 058 059 060 061 062 063 064 065 066 067 068 069 070 071 072 073 074 075 076 077 078 079 080 081 082 083 084 085 086 087 088 089 090 091 092 PANORAMIC HORZ_AMPL 14:9 ZOOM VERT_POS 14:9 ZOOM VERT_AMPL 14:9 ZOOM VERT_SCOR 14:9 ZOOM VERT_SSYM 14:9 ZOOM TRAPEZE 14:9 ZOOM CUSHION 14:9 ZOOM HOR_COR_SYM 14:9 ZOOM HOR_CORNER 14:9 ZOOM HORZ_POS 14:9 ZOOM HORZ_AMPL 16:9 ZOOM VERT_POS 16:9 ZOOM VERT_AMPL 16:9 ZOOM VERT_SCOR 16:9 ZOOM VERT_SSYM 16:9 ZOOM TRAPEZE 16:9 ZOOM CUSHION 16:9 ZOOM HOR_COR_SYM 16:9 ZOOM HOR_CORNER 16:9 ZOOM HORZ_POS 16:9 ZOOM HORZ_AMPL 16:9 ZOOM SUBTITLE VERT_POS 16:9 ZOOM SUBTITLE VERT_AMPL 16:9 ZOOM SUBTITLE VERT_SCOR 16:9 ZOOM SUBTITLE VERT_SSYM 16:9 ZOOM SUBTITLE TRAPEZE 16:9 ZOOM SUBTITLE CUSHION 16:9 ZOOM SUBTITLE HOR_COR_SYM 16:9 ZOOM SUBTITLE HOR_CORNER 16:9 ZOOM SUBTITLE HORZ_POS 16:9 ZOOM SUBTITLE HORZ_AMPL OSD Position BCLTHR Beam current threshold BCLG Beam current loop gain ROTATION (TILT) LSLSA Luma soft limiter LSLSB Luma soft limiter LSL2 Luma soft limiter LSLTA Luma soft limiter LSLTB Luma soft limiter REFERENCE WDR RED (NORMAL) REFERENCE WDR GREEN (NORMAL) REFERENCE WDR BLUE (NORMAL) REFERENCE CUTOFF RED 217 050 008 000 000 000 255 000 000 088 074 075 065 013 129 043 129 140 125 159 141 110 053 032 129 035 129 148 125 164 138 104 036 020 137 039 124 146 119 164 162 081 035 021 205 060 007 000 003 000 255 000 001 092 083 082 055 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 STANDARD MODE COLOUR STANDARD MODE CONTRAST FULL VERT_POS (16:9 MODE) FULL VERT_AMPL FULL VERT_SCOR FULL VERT_SSYM FULL TRAPEZE FULL CUSHION FULL HOR_COR_SYM FULL HOR_CORNER FULL HORZ_POS FULL HORZ_AMPL BRIGHT MODE BRIGHTNESS BRIGHT MODE COLOUR BRIGHT MODE CONTRAST SOFT MODE BRIGHTNESS SOFT MODE COLOUR SOFT MODE CONTRAST PERSONAL MODE FACTORY SETTING BRIGHTNESS PERSONAL MODE FACTORY SETTING COLOUR PERSONAL MODE FACTORY SETTING CONTRAST SCINC FOR PANORAMIC MODE SCINC1 FOR PANORAMIC MODE VOLUME AFTER APS VERTICAL SCROLL 14:9 HORIZONTAL START (It will be used only at 16:9 tube for 14:9 mode adjustment) 14:9 HORIZONTAL STOP (It will be used only at 16:9 tube for 14:9 mode adjustment) 4:3 RGB HORIZONTAL AMPLITUDE 4:3 RGB CUSHION 14:9 RGB HORIZONTAL AMPLITUDE 14:9 RGB CUSHION PANAROMIC RGB HORIZONTAL AMPLITUDE 16:9 RGB HORIZONTAL AMPLITUDE 16:9 SUBTITLE RGB HORIZONTAL AMPLITUDE FULL RGB HORIZONTAL AMPLITUDE TELETEXT HORIZONTAL POSITION 050 022 128 093 131 133 127 148 137 109 055 057 027 050 030 027 050 017 027 050 030 032 032 005 - 047 029 129 055 129 136 126 153 136 109 035 020 043 050 032 043 058 020 043 050 032 056 125 005 008 031 - 185 055 163 054 101 074 150 055 158 031 027 027 027 095 14.3.OPTIONS MENU Select the parameter by pressing up/down buttons. Adjust the parameter by pressing Left/Right buttons. . In OPTIONS menu, some of the changed parameters are not stored automatically. To store the adjusted parameters, you should turn off and on TV. OPTIONS... 000 001 002 003 004 005 006 007 008 009 02 00 22 08 00 10 00 56 39 0F 00000010 00000000 00100010 00001000 00000000 00010000 00000000 01010110 00111001 00001111 Option 0. Video Processor Crystal Indication B7: x = x B6: x = x B5: x = x B4: x = x B3: x = x B2: x = x B1: Xa = note1 (Crystal indication) B0: Xb = note1 (Crystal indication) note 1: Xa,Xb 0,1 : Pal M, Pal N, NTSC M Pin 34 : 3.58 (1, 2 or 3 crystals) Pin 35 : No crystal 1,0 : Pal BG, Pal DK, Pal I/I+, Secam BG, Secam DK, Secam L/L’, Secam K1 Pin 34 : No crystal Pin 35 : 4.43 (1 crystal) 1,1 : Pal BG, Pal DK, Pal I/I+, Secam BG, Secam DK, Secam L/L’, Secam K1, Pal M, Pal N, Ntsc M Pin 34 : 3.58 (1, 2 or 3 crystals) Pin 35 : 4.43 (1 crystal) Option 1. (0x01) Video Processor Decoder Mode Register B4: B3: B2: B1: B0: x x x LUMA BB = = = = = x x x 1 Luma Soft Limiter Enabled 1 Blue Background Option Option 3. (0x19) Video Processor Cathode Drive Level B7: x = x B6: x = x B5: x = x B4: x = x B3: x = x B2: x = x B1: x = x B0: country = note 0 Note 0: choice for others country option 1 : BG 0 : DK Option 4. B7: x = B6: x = B5: x = B4: x = B3: x = B2: x = B1: x = B0: x = x x x x x x x x Option 5. CTI Avaliable, Mono AVL B7: x = x B6: x = x B5: x = x B4: x = x B3: x = x B2: x = x B1: x = x B0: x = x Option 6. B7: = B6: = B5: = B4: x = TEXT LANGUAGE 3 TEXT LANGUAGE 2 TEXT LANGUAGE 1 x note 1: F :Frequency Mode 1: = Frequency Menu Item available 0: = Frequency Menu Item not available Option 8. IF Frequency B7: x = x B6: x = x B5: IfI = 0 B4: IfD = 0 B3: IfM = note 5 B2: Aps = note 6 B1: Hp = note 7 B0: Hue = note 8 note 3 note 4 note 3: IfI 1 = IF I 39.5 MHz 0 = IF I 38.9 MHz Great Britain I , Only UHF Tuner Ireland I+ , Standard Tuner note 4: IfD 1 = IF DK 38.0 MHz 0 = IF DK 38.9 MHz note 5: IfM 1 = IF M,N 45.75 MHz S&N American Models , Tuner UV1336 0 = IF M,N 38.9 MHz Euro M,N Models , Standard Tuner Note 6: Aps ( Only for PLL ) 0 = A.P.S. done 1 = A.P.S. set note 7: Hp : Headphone available 0 = No headphone 1 = Headphone available note 8: Hue : Hue Available 0 = No Hue 1 = Hue available Option 9. Standard Available (Only Pal M/N, Ntsc M) Option 10. Scart, Combfilter, Teletext, Language B7: x = x B6: RGB = note 2 B5: FAV = B4: AV2S = B3: FSVHS = note 3 B2: BAV = note 4 B1: Sc2 = note 5 B0: BSVHS = note 6 note 2 : RGB = RGB Menu Item active/inactive 0 1 RGB Menu Item inactive RGB Menu Item active = = note 3: 0 = Front S-VHS not supported 1 = Front S-VHS available note 4: 0 = Back AV (AV-3) not supported 1 = Back AV (AV-3) available note 5: 0 = Scart 2 not supported 1 = Scart 2 available note 6: 0 = Back SVHS not supported 1 = Back SVHS available Option 11. PLL Tuner Control 1 Byte Pll tuner control 1 byte b7 b6 b5 b4 b3 b2 b1 b0 Philips UV1316T MK3 1 0 0 0 1 1 1 0 Philips UV1316MK2 1 0 0 0 1 1 1 0 Alps TELE9X062A 1 0 0 0 1 1 1 0 Samsung TEXX2949PG28A 1 0 0 0 1 1 1 0 Siel PT060 1 0 0 0 1 1 1 0 Temic 5001PH5-3X0003 1 0 0 0 1 1 1 0 Thomson CTT5020 1 0 0 0 1 1 1 0 Option 12. PLL Tuner Control 2 Low Byte Pll tuner control 2 low byte Option 13. PLL Tuner Control 2 Mid Byte b7 b6 b5 b4 b3 b2 b1 b0 Philips UV1316T MK3 0 0 0 0 0 0 1 0 Philips UV1316MK2 1 0 0 1 0 0 1 0 Alps TELE9X062A 0 0 0 0 0 0 1 0 Samsung TEXX2949PG28A 0 0 0 0 0 0 1 0 Siel PT060 1 1 0 1 0 0 0 0 Temic 5001PH5-3X0003 0 0 0 0 0 1 0 0 Thomson CTT5020 0 0 0 0 0 1 1 0 Option 14. PLL Tuner Control 2 High Byte b7 b6 b5 b4 b3 b2 b1 b0 Philips UV1316T MK3 0 0 0 0 0 1 0 0 Philips UV1316MK2 0 0 1 1 0 1 0 0 Alps TELE9X062A 0 0 0 0 1 0 0 0 Samsung TEXX2949PG28A 0 0 0 0 1 0 0 0 Siel PT060 0 0 1 1 0 0 0 0 Temic 5001PH5-3X0003 0 0 0 0 0 0 0 1 Thomson CTT5020 1 0 0 0 0 1 0 1 Option 15. PLL Tuner VHF LOW – VHF HIGH Crossover Low Byte b7 b6 b5 b4 b3 b2 b1 b0 Philips UV1316T MK3 0 0 1 0 0 0 0 0 Philips UV1316MK2 0 0 0 0 1 0 1 0 (0A hex) Alps TELE9X062A 0 0 0 0 0 0 0 0 Samsung TEXX2949PG28A 0 0 0 0 1 0 0 0 Siel PT060 0 0 0 0 1 0 1 0 Temic 5001PH5-3X0003 0 0 0 0 0 0 0 0 Thomson CTT5020 1 0 1 0 1 0 1 0 (AA hex) Option 16. PLL Tuner VHF LOW – VHF HIGH Crossover High Byte Pll tuner VHF LOW - VHF HIGH crossover high byte b7 b6 b5 b4 b3 b2 b1 b0 Philips UV1316T MK3 0 0 0 0 1 1 0 0 Philips UV1316MK2 0 0 0 0 1 1 0 0 (0C hex) Alps TELE9X062A 0 0 0 0 0 0 0 0 Samsung TEXX2949PG28A 0 0 0 0 1 1 0 1 Siel PT060 0 0 0 0 1 1 0 1 Temic 5001PH5-3X0003 0 0 0 0 0 0 0 0 Thomson CTT5020 0 0 0 0 1 0 0 1 (09 hex) Option 17. PLL Tuner VHF HIGH – UHF Crossover Low Byte b7 b6 b5 b4 b3 b2 b1 b0 Temic Thomson 5001PH5-3X0003 CTT5020 0 0 0 0 0 0 0 0 0 0 0 1 1 0 1 1 (1B hex) Option 19. PIP PLL Tuner Control 1 Byte b7 b6 b5 b4 b3 b2 b1 b0 Philips UV1316MK2 1 0 0 0 1 1 1 0 Alps TELE9X062A 1 0 0 0 1 1 1 0 Samsung TEXX2949PG28A 1 0 0 0 1 1 1 0 Siel PT060 1 0 0 0 1 1 1 0 Temic 5001PH5-3X0003 1 0 0 0 1 1 1 0 Thomson CTT5020 1 0 0 0 1 1 1 0 Option 20. PIP PLL Tuner Control 2 Low Byte b7 b6 b5 b4 b3 b2 b1 b0 Philips UV1316MK2 1 0 1 0 0 0 0 1 Alps TELE9X062A 0 0 0 0 0 0 0 1 Samsung TEXX2949PG28A 0 0 0 0 0 0 0 1 Siel PT060 0 1 1 0 0 0 0 0 Temic 5001PH5-3X0003 0 0 0 0 0 0 1 0 Thomson CTT5020 0 0 0 0 0 0 1 1 Option 21. PIP PLL Tuner Control 2 Mid Byte b7 b6 b5 b4 b3 b2 b1 b0 Philips UV1316MK2 1 0 0 1 0 0 1 0 Alps TELE9X062A 0 0 0 0 0 0 1 0 Samsung TEXX2949PG28A 0 0 0 0 0 0 1 0 Siel PT060 1 1 0 1 0 0 0 0 Temic 5001PH5-3X0003 0 0 0 0 0 1 0 0 Thomson CTT5020 0 0 0 0 0 1 1 0 Option 22. PIP PLL Tuner Control 2 High Byte b7 b6 b5 b4 b3 b2 b1 b0 Philips UV1316MK2 0 0 1 1 0 1 0 0 Alps TELE9X062A 0 0 0 0 1 0 0 0 Samsung TEXX2949PG28A 0 0 0 0 1 0 0 0 Siel PT060 0 0 1 1 0 0 0 0 Temic 5001PH5-3X0003 0 0 0 0 0 0 0 1 Thomson CTT5020 1 0 0 0 0 1 0 1 Option 23. PIP PLL Tuner VHF LOW – VHF HIGH Crossover Low Byte b7 b6 b5 b4 b3 b2 b1 b0 Philips UV1316MK2 0 0 0 0 1 0 1 0 (0A hex) Alps TELE9X062A 0 0 0 0 0 0 0 0 Samsung TEXX2949PG28A 0 0 0 0 1 0 0 0 Option 25. PIP PLL Tuner VHF HIGH – UHF Crossover Low Byte b7 b6 b5 b4 b3 b2 b1 b0 Philips UV1316MK2 1 1 1 0 0 0 1 0 (E2 hex) Alps TELE9X062A 0 0 0 0 0 0 0 0 Samsung TEXX2949PG28A 1 0 1 0 0 0 1 0 Siel PT060 1 0 1 0 0 1 0 0 Temic 5001PH5-3X0003 0 0 0 0 0 0 0 0 Thomson CTT5020 1 0 1 0 0 0 1 0 (A2 hex) Option 26. PIP PLL Tuner VHF HIGH – UHF Crossover High Byte b7 b6 b5 b4 b3 b2 b1 b0 Philips UV1316MK2 0 0 0 1 1 1 1 0 (1D hex) Alps TELE9X062A 0 0 0 0 0 0 0 0 Samsung TEXX2949PG28A 0 0 0 1 1 1 1 0 Siel PT060 0 0 0 1 1 1 1 0 Temic 5001PH5-3X0003 0 0 0 0 0 0 0 0 Thomson CTT5020 0 0 0 1 1 0 1 1 (1B hex) Option 27. Language Available 1 B7: L7 = DANISH B6: L6 = SWEDISH B5: L5 = ITALIAN B4: L4 = PORTUGUESE B3: L3 = SPANISH B2: L2 = FRENCH B1: L1 = GERMAN B0: L0 = ENGLISH 1: Language available 0: Language not available Option 28. Language Available 2 B7: L15 = CROATIC B6: L14 = POLISH B5: L13 = SLOVAK B4: L12 = CZECH B3: L11 = HUNGARY B2: L10 = GREEK B1: L9 = TURKEY B0: L8 = NORWEGIAN 1: Language available 0: Language not available Option 29. Language Available 3 and Zoom Mode Available note 2: Tub : Tube size 0 1 = = 16:9 Tube size 4:3 Tube size note 3: Z.Def : Zoom Default Mode 0 1 = = 16:9 mode default 4:3 mode default Option 30. Country B7: C4 = note 1 B6: C3 = note 1 B5: C2 = note 1 B4: C1 = note 1 B3: C0 = note 1 B2: x = x B1: x = x B0: x = x note 1: C5,C4,C3,C2,C1,C0 0, 0, 0,0,0 0, 0, 0,0,1 0, 0, 0,1,0 0, 0, 0,1,1 0, 0, 1,0,0 0, 0, 1,0,1 0, 0, 1,1,0 0, 0, 1,1,1 0, 1, 0,0,0 0, 1, 0,0,1 0, 1, 0,1,0 0, 1,0,1,1 0, 1,1,0,0 0, 1,1,0,1 0, 1,1,1,0 0, 1,1,1,1 1, 0,0,0,0 1, 0,0,0,1 1, 0,0,1,0 1, 0,0,1,1 1, 0,1,0,0 = = = = = = = = = = = = = = = = = = = = = = Country OTHER, D, A, CH, I, F, RSM, B, DK, S, N, FIN, GB, IRL, IS, NL, E, P, PL, CZ, H, Not allowed Germany prescaler MSP NICAM (AVL = OFF) b7 b6 b5 b4 b3 b2 b1 b0 0 0 0 1 1 1 1 1 (if virtual dolby option is available) Option 33. Prescaler MSP SCART (AVL=OFF) b7 b6 b5 b4 b3 b2 b1 b0 prescaler MSP SCART (AVL = OFF) 0 0 0 0 1 1 0 0 prescaler MSP SCART (AVL = OFF) b7 b6 b5 b4 b3 b2 b1 b0 0 0 0 1 1 0 0 1 (if virtual dolby option is available) Option 34. Prescaler MSP I2S (AVL=OFF) b7 b6 b5 b4 b3 b2 b1 b0 prescaler MSP I2S (AVL = OFF) not defined yet (if virtual dolby option is available) Option 35. Not used B7: x = note 7 B6: x = note 6 B5: x = note 5 B4: x = note 4 B3: AV2S = Scart2 SVHS B2: Macro = Macrovision B1: DP = Dolby Prologic B0: VD = Virtual Dolby Option 36. Not used B7: x = note 7 B6: TAT = 1 Tilt and trapez enabled B5: SWF = 1 Subwoofer enabled B4: VLO = 1 Variable line out B3: VBUS = 1 Vestelbus enabled B2: x = x B1: DVD = 1 DVD enabled B0: DVB = 1 DVB enabled Option 37. Reserved for USA Option 38. TV Teletext Mode Selection, Child Lock, Equalizer Country B7: VCR = note 7 B6: C = note 6 B5: LM = note 5 B4: EQ = note 4 B3: x = x note 3 : RGB = 0 = 1 = RGB Menu Item active/inactive RGB Menu Item inactive RGB Menu Item active note 4 : EQ = 0 = 1 = Equalizer available Equalizer not available Equalizer available note 5 : LM = 0 = 1 = List Mode available List Mode not available List Mode available note 6 : C = 0 = 1 = Country Line available / Aps available or not Country Line not available / Aps not available Country Line available / Aps available note 7 : VCR = 0 = 1 = VCR Menu Item available / not available VCR Menu Item not available VCR Menu Item available Option 39. Personal Preferance Equalizer Band 1 b7 b6 b5 b4 b3 b2 b1 b0 EQUALIZER BAND 1 0 0 0 0 0 1 1 0 Option 40. Personal Preferance Equalizer Band 2 b7 b6 b5 b4 b3 b2 b1 b0 EQUALIZER BAND 2 0 0 0 0 0 1 1 0 Option 41. Personal Preferance Equalizer Band 3 b7 b6 b5 b4 b3 b2 b1 b0 EQUALIZER BAND 3 0 0 0 0 0 1 1 0 Option 42. Personal Preferance Equalizer Band 4 b7 b6 b5 b4 b3 b2 b1 b0 EQUALIZER BAND 4 0 0 0 0 0 1 1 0 Option 43. Personal Preferance Equalizer Band 5 b7 b6 b5 b4 b3 b2 b1 b0 EQUALIZER BAND 5 0 0 0 0 0 1 1 0 Option 47. Volume Offset Center b7 b6 b5 b4 b3 b2 b1 b0 VOLUME OFFSET CENTER 0 0 0 0 0 1 1 0 Option 48. Volume Offset Rear VOLUME OFFSET REAR b7 b6 b5 b4 b3 b2 b1 b0 0 0 0 0 0 1 1 0 Option 49. Surround Delay SURROUND DELAY b7 b6 b5 b4 b3 b2 b1 b0 0 0 0 0 0 0 0 1 Option 50. FM Prescale FM PRESCALE for Stereo b7 b6 b5 b4 b3 b2 b1 b0 0 0 0 0 1 1 0 0 FM PRESCALE b7 b6 b5 b4 b3 b2 b1 b0 0 0 0 0 1 0 0 1 for Dolby Note: if virtual dolby is available, this option is not used. Option 51. NICAM Prescale NICAM Prescale for Stereo b7 b6 b5 b4 b3 b2 b1 b0 0 0 1 0 1 1 0 1 3D Panorama b7 b6 b5 b4 b3 b2 b1 b0 0 0 0 0 1 0 1 1 NICAM Prescale for Dolby b7 b6 b5 b4 b3 b2 b1 b0 0 0 0 0 1 1 1 0 Note: if virtual dolby is available, this option is not used. Option 52. Scart Input Prescale Scart Input Prescale for Stereo b7 b6 b5 b4 b3 b2 b1 b0 0 0 0 0 1 0 0 0 Scart Input Prescale for Dolby b7 b6 b5 b4 b3 b2 b1 b0 0 0 0 0 1 1 1 1 prescaler MSP Scart (AVL = OFF) b7 b6 b5 b4 b3 b2 b1 b0 0 0 0 1 1 0 0 1 (if virtual dolby option is available) Option 55. Speaker Setup Speaker Setup (L/R, L/C/R, L/R/S, L/C/R/S) b7 b6 b5 b4 b3 b2 b1 b0 0 0 0 0 0 0 0 0 Option 56. Audio Options Available Or Not Attention: All bits on the Option 56 must be the “0”for MONO TV SETS B7: B6: B5: B4: B3: B2: B1: B0: nicam ASD VRS CRM … LBE Spa Avl = = = = = = = = note 7 note 6 note 5 note 4 x note 2 note 1 note 0 note 7 : nicam = 0 = 1 = nicam available nicam not available nicam available note 6 : ASD = 0 = 1 = Auto Sound Detection available/not available Auto Sound Detection not available Auto Sound Detection available note 5 : VRS = 0 = 1 = Virtual Surround VRS not available VRS available note 4 : CRM = 0 = 1 = CARRIER MUTE OFF/ON Sound carrier mute is ON in the Stereo Sound IC Sound carrier mute is OFF in the Stereo Sound IC (i.e. option available) note 2 : LBE = 0 = 1 = LBE (Dynamic Bass) LBE not available LBE available note 1 : Spa = 0 = 1 = Spatial Efect available Spatial Efect not available Spatial Efect available note 1 : b7 b6 b5 b4 b3 b2 b1 b0 0 0 0 1 1 0 0 1 MSP Stereo/Mono Threshold Option 58. MSP Audio Flags B7: b7 = x B6: b6 = x B5: b5 = x B4: Trs = note 1 B3: Trb = note 1 B2: Bbe = note 1 B1: Spa = note 1 B0: Avl = note 1 note 1 : Defines whether the feature is toggled ON or OFF in the menu and stored. 0 : OFF 1 : ON Option 59. NICAM Threshold b7 b6 b5 b4 b3 b2 b1 b0 MSP NICAM Threshold 0 1 1 0 0 1 0 0 Option 60. Power Delay Time B7: NZ = x B6: HM = x B5: L5 = note 3 B4: L4 = note 3 B3: L3 = note 3 B2: L2 = note 3 B1: L1 = note 3 B0: L0 = note 3 note 3: L7 L6 L5 Default Value : x x 1 1000 MSEC = 1SN Number 0 1 2 3 4 5 6 L7L6L5L4L3L2L1L0 00000000 00000001 00000010 00000011 00000100 00000101 00000110 = = = = = = = L4 1 Delay 4 4,25 4,5 4,75 5 5,25 5,5 L3 0 sec sec sec sec Sec Sec Sec L2 0 L1 0 L0 0 Number 32 33 34 35 36 37 38 L7L6L5L4L3L2L1L0 00100000 00100001 00100010 00100011 00100100 00100101 00100110 = = = = = = = Delay 12 12,25 12,5 12,75 13 13,25 13,5 sec sec sec sec sec sec sec 20 21 22 23 24 25 26 27 28 29 30 31 00010100 00010101 00010110 00010111 00011000 00011001 00011010 00011011 00011100 00011101 00011110 00011111 = = = = = = = = = = = = 9 9,25 9,5 9,75 10 10,25 10,5 10,75 12 12,25 12,5 12,75 sec sec sec sec sec sec sec sec sec sec sec sec 52 53 54 55 56 57 58 59 60 61 62 63 00110100 00110101 00110110 00110111 00111000 00111001 00111010 00111011 00111100 00111101 00111110 00111111 = = = = = = = = = = = = 17 17,25 17,5 17,75 18 18,25 18,5 18,75 19 19,25 19,5 19,75 sec sec sec sec sec sec sec sec sec sec sec sec 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 76543210 00000000 00000001 00000010 00000011 00000100 00000101 00000110 00000111 00001000 00001001 00001010 00001011 00001100 00001101 00001110 00001111 00010000 00010001 00010010 00010011 00010100 00010101 00010110 00010111 00011000 00011001 00011010 00011011 00011100 00011101 00011110 00011111 Bit Positions 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 Colour Code 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 76543210 00100000 00100001 00100010 00100011 00100100 00100101 00100110 00100111 00101000 00101001 00101010 00101011 00101100 00101101 00101110 00101111 00110000 00110001 00110010 00110011 00110100 00110101 00110110 00110111 00111000 00111001 00111010 00111011 00111100 00111101 00111110 00111111 14.4.OPTION TABLE RECOMMENDED VALUES X listed in the option can be 0 or 1 OPTION 000 001 002 003 004 005 006 007 008 009 010 011 012 013 014 015 016 017 018 019 020 021 022 023 024 025 026 027 028 029 030 031 032 033 034 035 036 037 038 2835 MULTI X2 XXXXXX10 XX XXXXXXXX 23 001XXX11 XX XXXXXXX0 XX XXXXXXXX XX XXXXXXXX XX XXXXXXXX XX XX0XXX1X A1 11000001 0B 00001111 X2 XXXXX011 8E 10001110 03 00000011 06 00000110 15 10000101 AA 10101010 09 00001001 A2 10100010 1B 00011011 XX XXXXXXXX XX XXXXXXXX XX XXXXXXXX XX XXXXXXXX XX XXXXXXXX XX XXXXXXXX XX XXXXXXXX XX XXXXXXXX FF 11111111 FF 11111111 FF 11111111 XX XXXXXXX 0F 00001111 23 00100011 0E 00001110 XX XXXXXXXX XX XXXXXXXX X4 XXXXX1XX XX XXXXXXXX AF 11001111 2835W MULTI X2 XXXXXX10 XX XXXXXXXX 23 001XXX11 XX XXXXXXX0 XX XXXXXXXX XX XXXXXXXX XX XXXXXXXX XX XX0XXX1X 01 00000001 0B 00001111 X7 XXXXX111 8E 10001110 03 00000011 06 00000110 15 10000101 AA 10101010 09 00001001 A2 10100010 1B 00011011 XX XXXXXXXX XX XXXXXXXX XX XXXXXXXX XX XXXXXXXX XX XXXXXXXX XX XXXXXXXX XX XXXXXXXX XX XXXXXXXX FF 11111111 FF 11111111 EF 11101111 XX XXXXXXX 0F 00001111 23 00100011 0E 00001110 XX XXXXXXXX XX XXXXXXXX X4 XXXXX1XX XX XXXXXXXX AF 11001111 2835W PAL I X2 XXXXXX10 XX XXXXXXXX 23 001XXX11 XX XXXXXXX0 XX XXXXXXXX XX XXXXXXXX XX XXXXXXXX XX XX0XXX1X 01 00000001 04 00001111 X7 XXXXX111 8E 10001110 03 00000011 06 00000110 15 10000101 AA 10101010 09 00001001 A2 10100010 1B 00011011 XX XXXXXXXX XX XXXXXXXX XX XXXXXXXX XX XXXXXXXX XX XXXXXXXX XX XXXXXXXX XX XXXXXXXX XX XXXXXXXX FF 11111111 FF 11111111 EF 11101111 XX XXXXXXX 0F 00001111 23 00100011 0E 00001110 XX XXXXXXXX XX XXXXXXXX X4 XXXXX1XX XX XXXXXXXX AF 11001111 054 055 056 057 058 059 060 75 00 DE 19 00 64 10 01110101 00000000 11011110 00011001 00000000 01100100 00010000 75 00 DE 19 00 64 10 01110101 00000000 11011110 00011001 00000000 01100100 00010000 75 00 DE 19 00 64 10 01110101 00000000 11011110 00011001 00000000 01100100 00010000 14.5.SCREEN ADJUSTMENT (FBT SCREEN) SCREEN ADJUST POT From the option list change option 2 bit 6 from 0 to 1 for disabling vertical scan. Adjust horizontal line via screen adjust pot. as thin as possible. Then press 0 to leave service menu. 14.6.GEOMETRY ADJUSTMENT 4:3 FORMATS 4:3 MODE 16:9 MODE 16:9 FORMATS AUTO MODE REGULAR MODE ZOOM 14:9 MODE ZOOM 16:9 MODE SUBTITLE ZOOM MODE FULL MODE PANOROMIC MODE 16.BLOCK DIAGRAM GENERAL BLOCK DIAGRAM OF CHASSIS 11 AK 45 SC3_V_OUT R Video TU200 38.9MHz-TV TUNER Sound K3958M EPCOS SAW Filter TDA9885T QSS R RGB AMPLIFIER TDA 6107 (PHILIPS) G CVBS B SC1_V_OUT VDP313XY R K9656M EPCOS SAW Filter G B FB Vertical Stage Horizontal R SC1_RGB G B Yoke STV9379FA G PI5V330-SOIC RGB SW B FB SC2_RGB/DVD/DVB PIP CRT EXT_CVBS/Y SDA SCL SCL SDA SYNC SC2_V_OUT SC1 SC2 TEA615C VIDEO SW TO_PIP OSD_R CVBS_TEXT IF OSD_G TV_LINK SVHS-Y SDA5555 (MicroController) SDA OSD_B OSD_FBL SC3 24CO8 (E2PROM) SCL L TDA1308 Headphone R SCL SDA 8 ohm 12W SC1 SC2 MSP34XXG L TDA7269A AUDIO AMPLIFIER FRONT/SC3 DVD/DVB/BAV R 8 ohm 12W 57 JVC AK45 Service Manual 19/09/2003 11AK45B5-1 11AK45B5-2 29LF-92E PARTS LISTING REPLACEMENT PARTS Replacement parts which have special safety characteristics are identified in this manual. Electrical components having such features are identified by in the Replacement Parts Listing. The use of a substitute replacement part which does not have the same safety characteristics as the factory recommended is not permitted. Replacement parts not shown in this service manual may create shock fire, or other hazards. HOW TO ORDER REPLACEMENT PARTS To have your order completed promptly and correctly please supply the following information. 1. MODEL NUMBER 2. REF. NO. 3. PART NO. (*) 4. DESCRIPTION 5. CODE 6. QUANTITY (*) When ordering any part, a “V” should be added before the Part No. (*) REF No. ! ! ! PARTS DESCRIPTION SN CODE EX CODE . . PICTURE TUBE 30014433 29" CPT TUBE SAFE 50HZ REALFLAT 30032257 29 DEG COIL&EARTH CB. SF FL W/UL(SHARP) CR AL DP AX TU200 TUNER 30009637 TUNER WSP (PLL) CTF5510A AR BC IC100 IC100 IC101 IC102 IC103 IC104 IC106 IC116 IC200 IC201 IC206 IC301 IC500 IC500 IC502 IC502 IC600 IC601 IC700 IC704 IC900 IC901 IC902 INTEGRATED CIRCUITS 30001669 PREAMPLIFIER TFMS1380 30015087 IC SAFE OPTOCOUPLER TCET1102G 30001622 IC 7805 (1A) 30001668 IC LM317T 30001668 IC LM317T 30001500 IC LM7808 30011968 IC SMPS MC44608 DIP8 30001506 IC TL431 30019492 IC VDP3134Y 30001619 IC VIDEO SWITCH TEA6415C DIP20 30021083 IC TDA9886T/V3-SO24 30016113 IC AAMP TDA7269A 2*14W MULTIWATT11 20170875 PR.IC.45-AK45_SHARP 3.3.106-L.1 (29LF92EIT) 20170876 PR.IC.45-AK45_SHARP 3.3.106-L.2 (29LF92EC) 20155581 IC 24C16 V116M5314B00040100712 (29LF92EC) 20155582 IC 24C16 V117L5314A00040100712 (29LF92EIT) 30007793 IC STV9379FA 30001506 IC TL431 30013658 IC MSP3410G SDIP64 30001518 IC TDA1308 30018768 IC TDA6109 30014346 IC 78L05 TO-92 (100mA) 30014346 IC 78L05 TO-92 (100mA) AD AA AB AC AC AC AF AC AP AM AL AH AS AS AB AB AK AC AS AE AK AA AA AM AE AF AH AH AH AQ AH BA AY AX AV BD BD AF AF AW AH BD AP AW AE AE Q1 Q102 Q103 Q106 Q107 Q108 Q109 Q110 Q112 Q113 Q114 Q200 Q201 Q202 Q203 Q208 30001455 30001386 30001454 30001454 30001428 30001457 30001457 30001384 30001458 30001457 30001457 30001457 30001457 30001457 30001457 30001457 AA AE AA AA AA AA AA AB AA AA AA AA AA AA AA AA AC AP AC AC AC AC AC AG AB AC AC AC AC AC AC AC TRANSISTORS TR BC558B TR MTP6N60E (PLASTIC) TR BC548B TR BC548B TR BF423 TR BC848B SMD TR BC848B SMD TR MCR22-6 TR BC858B SMD TR BC848B SMD TR BC848B SMD TR BC848B SMD TR BC848B SMD TR BC848B SMD TR BC848B SMD TR BC848B SMD 8 REF No. Q216 Q218 Q220 Q221 Q222 Q223 Q500 Q501 Q502 Q503 Q504 Q505 Q508 Q511 Q513 Q600 Q601 Q602 Q603 Q605 Q606 Q700 Q703 Q704 Q900 Q901 Q902 Q903 Q904 Q905 Q906 PARTS DESCRIPTION 30001457 TR BC848B SMD 30001458 TR BC858B SMD 30001457 TR BC848B SMD 30001457 TR BC848B SMD 30001457 TR BC848B SMD 30001457 TR BC848B SMD 30001457 TR BC848B SMD 30001457 TR BC848B SMD 30001457 TR BC848B SMD 30001457 TR BC848B SMD 30001457 TR BC848B SMD 30001458 TR BC858B SMD 30001457 TR BC848B SMD 30001457 TR BC848B SMD 30001458 TR BC858B SMD 30001429 TR E/W N-CH TMOS 200V 30001435 TR NBJT BC639 1A/100V TO92 30001441 TR BU2508AF 30001458 TR BC858B SMD 30001458 TR BC858B SMD 30001458 TR BC858B SMD 30001458 TR BC858B SMD 30001458 TR BC858B SMD 30001457 TR BC848B SMD 30001427 TR BF422 30001458 TR BC858B SMD 30001458 TR BC858B SMD 30001458 TR BC858B SMD 30001458 TR BC858B SMD 30001458 TR BC858B SMD 30001452 TR BC327 D100 D100 D100 D101 D101 D101 D101 D102 D102 D102 D103 D103 D104 D104 D105 D105 D106 D108 D110 D111 D112 D113 D114 D118 D119 D121 D121+ D125 D127 D129 D130 D131 D132 D133 DIODES 20060150 BRACKET LED 20 30001274 LED RED 30001329 DIODE 1N4007 1A/1000V 30A 20060150 BRACKET LED 20 30029696 LED YELLOW ORANGE 5MM ULTRA BRIGHT 30001371 DIODE ZENER 5.1V ZPD 20108354 DIODE BRIDGE GBU4M 4A/1000V 150A(FORMLU) 20060150 BRACKET LED 20 30019677 LED GREEN 5MM 30001371 DIODE ZENER 5.1V ZPD 30001371 DIODE ZENER 5.1V ZPD 30001318 DIODE BA159 1A/800V 20A 30001371 DIODE ZENER 5.1V ZPD 30001318 DIODE BA159 1A/800V 20A 30001371 DIODE ZENER 5.1V ZPD 30001318 DIODE BA159 1A/800V 20A 30001344 DIODE ZENER 6.2V 1/2W 30001315 DIODE BYD33D 1A/200V 20A 30001288 DIODE BYV27-200 2A/200V 50A 30001323 DIODE BY299 2A/800V 70A 30025773 DIODE ZENER SMD BZT55B5V1 30003720 DIODE ZENER BZT55C5V6 5.6V SMD 30001285 DIODE 1N4148 SMD 30009366 DIODE UF5402 3A/200V 150A 30009366 DIODE UF5402 3A/200V 150A 30007681 DIODE UF5407 3A/800V 150A 30001964 FERRITE BAR 5*8 30001285 DIODE 1N4148 SMD 30001315 DIODE BYD33D 1A/200V 20A 30001285 DIODE 1N4148 SMD 30001329 DIODE 1N4007 1A/1000V 30A 30001318 DIODE BA159 1A/800V 20A 30001285 DIODE 1N4148 SMD 30003722 DIODE ZENER ZPD15V SN CODE EX CODE AA AC AA AB AA AC AA AC AA AC AA AC AA AC AA AC AA AC AA AC AA AC AA AB AA AC AA AC AA AB AD AM AA AB AE AP AA AB AA AB AA AB AA AB AA AB AA AC AA AE AA AB AA AB AA AB AA AB AA AB AA AC AA AA AA AA AA AA AB AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AB AB AB AA AA AA AA AA AA AA AA AD AB AB AD AE AB AE AD AC AB AB AB AB AB AB AB AB AE AD AD AA AB AB AF AF AF AD AB AE AB AB AB AB AA 29LF-92E REF No. D134 D200 D204 D205 D206 D207 D208 D209 D212 D213 D214 D215 D216 D217 D218 D219 D220 D221Y D222Y D506 D601 D602 D603 D604 D609 D610 D611 D612 D613 D614 D615 D617 D622 D623 D624 D625 D627 D628 D701 D702 D706 D902 D903 D904 D905 D907 D908 D909 D910 X200 X201 X500 X700 ! PARTS 30001285 30001285 30001285 30025773 30018735 30018735 30018735 30018735 30001285 30012411 30025773 30025773 30025773 30025773 30025773 30025773 30025773 30025773 30025773 30012412 30001377 30001318 30001299 30001299 30001318 30001318 30007681 30001285 30001291 30025773 30001318 30025773 30001285 30001285 30001285 30001320 30001284 30001285 30007761 30001285 30001285 30001318 30001284 30001318 30001318 30001318 30014353 30001285 30001285 DESCRIPTION DIODE 1N4148 SMD DIODE 1N4148 SMD DIODE 1N4148 SMD DIODE ZENER SMD BZT55B5V1 DIODE ZENER BZT55C15 15V SMD DIODE ZENER BZT55C15 15V SMD DIODE ZENER BZT55C15 15V SMD DIODE ZENER BZT55C15 15V SMD DIODE 1N4148 SMD DIODE BA782 SMD DIODE ZENER SMD BZT55B5V1 DIODE ZENER SMD BZT55B5V1 DIODE ZENER SMD BZT55B5V1 DIODE ZENER SMD BZT55B5V1 DIODE ZENER SMD BZT55B5V1 DIODE ZENER SMD BZT55B5V1 DIODE ZENER SMD BZT55B5V1 DIODE ZENER SMD BZT55B5V1 DIODE ZENER SMD BZT55B5V1 DIODE ZENER 2.4V SMD DIODE ZENER 33V UZT 33B DIODE BA159 1A/800V 20A DIODE UF5404 3A/400V 150A DIODE UF5404 3A/400V 150A DIODE BA159 1A/800V 20A DIODE BA159 1A/800V 20A DIODE UF5407 3A/800V 150A DIODE 1N4148 SMD DIODE HER107 1A/800V 30A DIODE ZENER SMD BZT55B5V1 DIODE BA159 1A/800V 20A DIODE ZENER SMD BZT55B5V1 DIODE 1N4148 SMD DIODE 1N4148 SMD DIODE 1N4148 SMD DIODE GUC BY228 DIODE 1N4148 0.15A/100V 0.5A DIODE 1N4148 SMD DIODE ZENER SMD BZT55C3V6 DIODE 1N4148 SMD DIODE 1N4148 SMD DIODE BA159 1A/800V 20A DIODE 1N4148 0.15A/100V 0.5A DIODE BA159 1A/800V 20A DIODE BA159 1A/800V 20A DIODE BA159 1A/800V 20A DIODE BAT85 DIODE 1N4148 SMD DIODE 1N4148 SMD 30002851 30008778 30006662 30001756 PACKAGED CIRCUITS XTAL 4MHZ L.C=30PF XTAL 20.25MHZ XTAL 6MHZ XTAL 18.432MHZ AC AB AC AE AH AF AH AP COILS FIXED COIL 1UH Q45 M-A FIXED COIL 1UH Q45 M-A LINE FILTER SAFE 2X22MH 10mmX12.5mm FERRITE BEAT (805) BLM21A601S FIXED COIL 10UH Q65 K-A CAP CER 220PF 1KV K (PULSE) FIXED COIL 22UH Q40 K FIXED COIL 1UH Q45 M-A FIXED COIL 1UH Q45 M-A FERRITE BEAT (805) BLM21A601S AA AA AC AA AA AA AA AA AA AA AB AB AH AD AB AD AB AB AB AD L100 30001979 L101 30001979 L101 30018866 L102 30001971 L103 30001992 L107(NOT2) 30007308 L203 30001996 L206 30001979 L207 30001979 L212 30001971 SN CODE EX CODE AA AB AA AB AA AB AA AA AA AB AA AB AA AB AA AB AA AB AA AD AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AB AB AF AA AB AA AD AA AD AA AB AA AB AB AF AA AB AA AB AA AA AA AB AA AA AA AB AA AB AA AB AB AF AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AC AA AB AA AB ! ! ! ! ! ! ! 9 REF No. L213 L214 L215 L216 L217 L218 L220 L227 L232 L236 L239 L247 L251 L252 L263 L264 L265 L266 L500 L501 L502 L503 L504 L505 L506 L601 L602 L603 L700 L701 L702 L703 L711 L714 L715 L717 L719 PARTS 30001971 30001971 30001971 30001971 30001971 30001971 30001971 30001971 30001971 30001971 30001971 30001971 30001971 30001971 30001979 30001979 30001979 30001987 30001992 30001992 30001992 30001992 30001992 30001992 30006770 30002031 30017085 30002829 30001996 30001996 30001996 30001996 30001996 30001971 30001971 30001979 30001968 DESCRIPTION FERRITE BEAT (805) BLM21A601S FERRITE BEAT (805) BLM21A601S FERRITE BEAT (805) BLM21A601S FERRITE BEAT (805) BLM21A601S FERRITE BEAT (805) BLM21A601S FERRITE BEAT (805) BLM21A601S FERRITE BEAT (805) BLM21A601S FERRITE BEAT (805) BLM21A601S FERRITE BEAT (805) BLM21A601S FERRITE BEAT (805) BLM21A601S FERRITE BEAT (805) BLM21A601S FERRITE BEAT (805) BLM21A601S FERRITE BEAT (805) BLM21A601S FERRITE BEAT (805) BLM21A601S FIXED COIL 1UH Q45 M-A FIXED COIL 1UH Q45 M-A FIXED COIL 1UH Q45 M-A FIXED COIL 4.7UH Q70 K-A FIXED COIL 10UH Q65 K-A FIXED COIL 10UH Q65 K-A FIXED COIL 10UH Q65 K-A FIXED COIL 10UH Q65 K-A FIXED COIL 10UH Q65 K-A FIXED COIL 10UH Q65 K-A FIXED COIL 0.22UH FIXED COIL INJECTION 15MH LINEARITY COIL 20UH FIXED COIL BRIDGE 1.5MH FIXED COIL 22UH Q40 K FIXED COIL 22UH Q40 K FIXED COIL 22UH Q40 K FIXED COIL 22UH Q40 K FIXED COIL 22UH Q40 K FERRITE BEAT (805) BLM21A601S FERRITE BEAT (805) BLM21A601S FIXED COIL 1UH Q45 M-A FERRITE BEAD (0805) BLM21B201S SN CODE EX CODE AA AD AA AD AA AD AA AD AA AD AA AD AA AD AA AD AA AD AA AD AA AD AA AD AA AD AA AD AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AD AL AD AM AD AL AA AB AA AB AA AB AA AB AA AB AA AD AA AD AA AB AA AE Z200 Z201 CERAMIC FILTERS 30014261 FILTER SAW K3958M 30012545 FILTER SAW K9656M AF AG AR AR TR100 TR600 TR601 . TRANSFORMERS 30019432 TRF SMPS SAFE AK45 110° (170-270V) 30021290 TRF FBT SAFE 110° 50HZ LAYER 30002090 LINE DRIVER NEW TYPE 30015614 TRF PFC SAFE 0,9A 42 MH EP AG AS AD AL AS BC AM AX C100 C100 C101 C102 C102 C103 C103 C105 C106 C106 C107 C107 C108 C111 C113 C114 C115 C118 30000371 30000190 30000190 30000190 30000084 30000190 30000094 30012603 30000290 30000371 30000290 30000421 30000161 30007308 30006940 30007308 30000440 30007308 CAPACITORS CAP EL 22UF 50V M CAP CER 100PF 50V J CH CAP CER 100PF 50V J CH CAP CER 100PF 50V J CH CAP MKT SAFE 150NF 275V M AC P=15 CAP CER 100PF 50V J CH CAP MKT SAFE 220NF 275V M AC CAP SMD 100NF 25V K R (0603) CAP CER 10NF 50V Z F CAP EL 22UF 50V M CAP CER 10NF 50V Z F CAP EL 220UF 400V M (FOR 28'') CAP MKP SAFE 47NF 630V J CAP CER 220PF 1KV K (PULSE) CAP CER 2.7NF 1KV K B CAP CER 220PF 1KV K (PULSE) CAP CER SAFE 2.2NF 4KV M CAP CER 220PF 1KV K (PULSE) AA AA AA AA AC AA AA AA AA AA AA AG AB AA AA AA AA AA AB AB AB AB AG AB AB AB AB AB AB AS AE AD AB AD AC AD 29LF-92E ! ! REF No. C119 C120 C121 C122 C124 C125 C126 C127 C129 C130 C133 C134 C135 C137 C138 C140 C141 C142 C145 C146 C147 C148 C149 C150 C152 C154 C155 C156 C157 C160 C161 C162 C164 C165 C166 C168 C170 C171 C172 C173 C174 C175 C176 C202 C208 C209 C210 C212 C213 C214 C215 C217 C218 C222 C225 C226 C227 C229 C231 C233 C234 C235 C237 C238 C240 C242 PARTS DESCRIPTION 30000090 CAP MKT 22NF 100V J 30007308 CAP CER 220PF 1KV K (PULSE) 30012560 CAP SMD 100PF 50V J (0603) 30007308 CAP CER 220PF 1KV K (PULSE) 30000376 CAP EL 220UF 25V M 30028072 CAP EL 100UF 200V M (HR) 30012603 CAP SMD 100NF 25V K R (0603) 30012603 CAP SMD 100NF 25V K R (0603) 30012603 CAP SMD 100NF 25V K R (0603) 30000436 CAP CER 10NF 1KV ZE 30018259 CAP EL 4700UF 25V M 30018259 CAP EL 4700UF 25V M 30018259 CAP EL 4700UF 25V M 30000367 CAP EL 1UF 250V M 30016654 CAP SMD 100NF 16V K R (0603) 30000393 CAP EL 3.3UF 50V M 30000359 CAP EL 1000UF 16V M 30000387 CAP EL 33UF 50V M 30000375 CAP EL 220UF 16V M 30012603 CAP SMD 100NF 25V K R (0603) 30016654 CAP SMD 100NF 16V K R (0603) 30000360 CAP EL 1000UF 25V M 30012581 CAP SMD 1NF 50V K R (0603) 30016654 CAP SMD 100NF 16V K R (0603) 30000375 CAP EL 220UF 16V M 30000375 CAP EL 220UF 16V M 30000375 CAP EL 220UF 16V M 30016654 CAP SMD 100NF 16V K R (0603) 30016654 CAP SMD 100NF 16V K R (0603) 30000076 CAP MKT SAFE 100NF 275V M AC 30000440 CAP CER SAFE 2.2NF 4KV M 30007708 CAP CER 1NF 1KV K (PULSE) 30000362 CAP EL 1UF 50V M 30000362 CAP EL 1UF 50V M 30000225 CAP CER 220PF 50V J SL 30000161 CAP MKP SAFE 47NF 630V J 30012566 CAP SMD 22PF 50V J (0603) 30012590 CAP SMD 47NF 50V K (0603) 30000313 CAP CER 22NF 50V Z F 30012603 CAP SMD 100NF 25V K R (0603) 30012603 CAP SMD 100NF 25V K R (0603) 30012603 CAP SMD 100NF 25V K R (0603) 30012603 CAP SMD 100NF 25V K R (0603) 30012643 RES SMD 1/16W 120R J (0603) 30016126 CAP SMD 220NF 16V K R (0603) 30016126 CAP SMD 220NF 16V K R (0603) 30016126 CAP SMD 220NF 16V K R (0603) 30000352 CAP EL 100UF 16V M 30012609 CAP SMD 68NF 50V K (0603) 30016126 CAP SMD 220NF 16V K R (0603) 30016126 CAP SMD 220NF 16V K R (0603) 30016126 CAP SMD 220NF 16V K R (0603) 30012610 CAP SMD 10NF 50V J (0603) 30016126 CAP SMD 220NF 16V K R (0603) 30000109 CAP MKT 470NF 63V J 30000352 CAP EL 100UF 16V M 30016654 CAP SMD 100NF 16V K R (0603) 30000345 CAP EL 10UF 50V M 30016654 CAP SMD 100NF 16V K R (0603) 30016654 CAP SMD 100NF 16V K R (0603) 30016126 CAP SMD 220NF 16V K R (0603) 30012610 CAP SMD 10NF 50V J (0603) 30012583 CAP SMD 1.5NF 50V K (0603) 30012610 CAP SMD 10NF 50V J (0603) 30012559 CAP SMD 10PF 50V D COG (0603) 30012560 CAP SMD 100PF 50V J (0603) SN CODE EX CODE AA AB AA AD AA AB AA AD AA AB AE AQ AA AB AA AB AA AB AA AC AC AG AC AG AC AG AA AB AA AB AA AB AA AC AA AB AA AB AA AB AA AB AA AE AA AB AA AB AA AB AA AB AA AB AA AB AA AB AB AE AA AC AA AD AA AB AA AB AA AB AB AE AA AB AA AA AA AB AA AB AA AB AA AB AA AB AA AA AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AD AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AA AA AB AA AA AA AB 10 REF No. C246 C248 C249 C252 C253 C255 C258 C259 C260 C261 C262 C263 C264 C265 C266 C267 C268 C269 C270 C271 C273 C274 C275 C276 C277 C278 C279 C280 C282 C283 C284 C286 C287 C288 C289 C290 C292 C293 C296 C300 C301 C302 C304 C308 C327 C331 C333 C348 C349 C350 C351 C352 C353 C355 C356 C357 C358 C359 C360 C361 C362 C506 C507 C508 C509 C510 PARTS 30012586 30012586 30012610 30000387 30000345 30016126 30012581 30000345 30012585 30012588 30012610 30012588 30012603 30000109 30000109 30012581 30012590 30016654 30016654 30016654 30012590 30016654 30016654 30016654 30000345 30012559 30012559 30000345 30012585 30000345 30012585 30000345 30012607 30012589 30012589 30012581 30012589 30012607 30012589 30012589 30012607 30012581 30012607 30012589 30000109 30012572 30012579 30000109 30012581 30016654 30000345 30016654 30012581 30012603 30000109 30000345 30000345 30012581 30012581 30012603 30012603 30000345 30000393 30000345 30016654 30016654 DESCRIPTION CAP SMD 22NF 50V K (0603) CAP SMD 22NF 50V K (0603) CAP SMD 10NF 50V J (0603) CAP EL 33UF 50V M CAP EL 10UF 50V M CAP SMD 220NF 16V K R (0603) CAP SMD 1NF 50V K R (0603) CAP EL 10UF 50V M CAP SMD 2.2NF 50V K R (0603) CAP SMD 33NF 50V K (0603) CAP SMD 10NF 50V J (0603) CAP SMD 33NF 50V K (0603) CAP SMD 100NF 25V K R (0603) CAP MKT 470NF 63V J CAP MKT 470NF 63V J CAP SMD 1NF 50V K R (0603) CAP SMD 47NF 50V K (0603) CAP SMD 100NF 16V K R (0603) CAP SMD 100NF 16V K R (0603) CAP SMD 100NF 16V K R (0603) CAP SMD 47NF 50V K (0603) CAP SMD 100NF 16V K R (0603) CAP SMD 100NF 16V K R (0603) CAP SMD 100NF 16V K R (0603) CAP EL 10UF 50V M CAP SMD 10PF 50V D COG (0603) CAP SMD 10PF 50V D COG (0603) CAP EL 10UF 50V M CAP SMD 2.2NF 50V K R (0603) CAP EL 10UF 50V M CAP SMD 2.2NF 50V K R (0603) CAP EL 10UF 50V M CAP SMD 150PF 50V J (0603) CAP SMD 4.7NF 50V K (0603) CAP SMD 4.7NF 50V K (0603) CAP SMD 1NF 50V K R (0603) CAP SMD 4.7NF 50V K (0603) CAP SMD 150PF 50V J (0603) CAP SMD 4.7NF 50V K (0603) CAP SMD 4.7NF 50V K (0603) CAP SMD 150PF 50V J (0603) CAP SMD 1NF 50V K R (0603) CAP SMD 150PF 50V J (0603) CAP SMD 4.7NF 50V K (0603) CAP MKT 470NF 63V J CAP SMD 390PF 50V J (0603) CAP SMD 82PF 50V J (0603) CAP MKT 470NF 63V J CAP SMD 1NF 50V K R (0603) CAP SMD 100NF 16V K R (0603) CAP EL 10UF 50V M CAP SMD 100NF 16V K R (0603) CAP SMD 1NF 50V K R (0603) CAP SMD 100NF 25V K R (0603) CAP MKT 470NF 63V J CAP EL 10UF 50V M CAP EL 10UF 50V M CAP SMD 1NF 50V K R (0603) CAP SMD 1NF 50V K R (0603) CAP SMD 100NF 25V K R (0603) CAP SMD 100NF 25V K R (0603) CAP EL 10UF 50V M CAP EL 3.3UF 50V M CAP EL 10UF 50V M CAP SMD 100NF 16V K R (0603) CAP SMD 100NF 16V K R (0603) SN CODE EX CODE AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AA AA AB AA AA AA AB AA AD AA AD AA AB AA AA AA AB AA AB AA AB AA AA AA AB AA AB AA AB AA AB AA AA AA AA AA AB AA AB AA AB AA AB AA AB AA AA AA AB AA AB AA AB AA AB AA AA AA AB AA AB AA AA AA AB AA AA AA AB AA AD AA AA AA AB AA AD AA AB AA AB AA AB AA AB AA AB AA AB AA AD AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB 29LF-92E ! ! ! ! REF No. C511 C514 C515 C516 C517 C518 C519 C520 C521 C522 C523 C524 C525 C527 C530 C537 C601 C603 C604 C605 C607 C608 C609 C610 C612 C613 C614 C616 C617 C618 C619 C620 C621 C622 C623 C624 C628 C630 C631 C632 C633 C635 C636 C637 C638 C643 C644 C645 C646 C648 C700 C701 C702 C706 C707 C708 C712 C713 C715 C716 C717 C718 C719 C720 C721 C722 PARTS 30016654 30016654 30016654 30016654 30016654 30016654 30016654 30012573 30012573 30000345 30000345 30000345 30000345 30016654 30000375 30016654 30000351 30000402 30000075 30028072 30012610 30000409 30000082 30000286 30000348 30000360 30000360 30000151 30000161 30000444 30000367 30000177 30000136 30000137 30000156 30013003 30016126 30012603 30000296 30000074 30012603 30012584 30009208 30000332 30000092 30000092 30012591 30012591 30000296 30000069 30000352 30000345 30012583 30012581 30016654 30000407 30012581 30012581 30012581 30016654 30000092 30000092 30016126 30000345 30012576 30012576 DESCRIPTION CAP SMD 100NF 16V K R (0603) CAP SMD 100NF 16V K R (0603) CAP SMD 100NF 16V K R (0603) CAP SMD 100NF 16V K R (0603) CAP SMD 100NF 16V K R (0603) CAP SMD 100NF 16V K R (0603) CAP SMD 100NF 16V K R (0603) CAP SMD 47PF 50V J (0603) CAP SMD 47PF 50V J (0603) CAP EL 10UF 50V M CAP EL 10UF 50V M CAP EL 10UF 50V M CAP EL 10UF 50V M CAP SMD 100NF 16V K R (0603) CAP EL 220UF 16V M CAP SMD 100NF 16V K R (0603) CAP EL 10UF 350V M CAP EL 47UF 100V M CAP MKT 100NF 250V K (DC) CAP EL 100UF 200V M (HR) CAP SMD 10NF 50V J (0603) CAP EL 470UF 25V M CAP MKT 15NF 63V J CAP CER 1NF 500V K B CAP EL 10UF 160V M CAP EL 1000UF 25V M CAP EL 1000UF 25V M CAP MKP 3.3NF 2KV %3.5 CAP MKP SAFE 47NF 630V J CAP CER 470PF 1KV KB CAP EL 1UF 250V M CAP MKP SAFE 820NF 250V J CAP MKP SAFE 12NF 2000V %3.5 CAP MKP 15NF 630V J CAP MKP SAFE 430NF 250V J CAP MKP SAFE 1UF 250V J P=15 CAP SMD 220NF 16V K R (0603) CAP SMD 100NF 25V K R (0603) CAP CER 100NF 100V Z F CAP MKT 100NF 63V J CAP SMD 100NF 25V K R (0603) CAP SMD 1.8NF 50V K R (0603) CAP CER 470PF 1KV K (PULSE) CAP SMD 4.7NF 50V K (0805) CAP MKT 220NF 63V J CAP MKT 220NF 63V J CAP SMD 5.6NF 50V K (0603) CAP SMD 5.6NF 50V K (0603) CAP CER 100NF 100V Z F CAP MKT 1NF 100V J CAP EL 100UF 16V M CAP EL 10UF 50V M CAP SMD 1.5NF 50V K (0603) CAP SMD 1NF 50V K R (0603) CAP SMD 100NF 16V K R (0603) CAP EL 470UF 16V M CAP SMD 1NF 50V K R (0603) CAP SMD 1NF 50V K R (0603) CAP SMD 1NF 50V K R (0603) CAP SMD 100NF 16V K R (0603) CAP MKT 220NF 63V J CAP MKT 220NF 63V J CAP SMD 220NF 16V K R (0603) CAP EL 10UF 50V M CAP SMD 56PF 50V J CH (0603) CAP SMD 56PF 50V J CH (0603) SN CODE EX CODE AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AE AA AB AA AD AE AQ AA AB AA AD AA AB AA AB AA AB AA AE AA AE AB AF AB AE AA AB AA AB AC AK AC AG AC AG AB AF AC AG AA AB AA AB AA AB AA AC AA AB AA AA AA AC AA AB AA AD AA AD AA AA AA AA AA AB AA AC AA AB AA AB AA AA AA AB AA AB AA AC AA AB AA AB AA AB AA AB AA AD AA AD AA AB AA AB AA AA AA AA 11 REF No. C724 C725 C728 C729 C730 C731 C732 C733 C734 C735 C736 C737 C738 C739 C740 C741 C742 C743 C744 C745 C746 C747 C748 C749 C750 C751 C754 C763 C764 C765 C767 C769 C771 C772 C774 C775 C776 C779 C781 C782 C783 C784 C785 C786 C789 C791 C793 C794 C795 C796 C803 C808 C809 C810 C811 C900 C902 C904 C905 C906 C908 C909 C910 C913 C914 C915 PARTS 30000345 30016654 30012581 30016126 30016126 30012583 30012581 30016126 30016654 30000393 30000345 30000345 30012576 30000345 30012581 30012581 30012565 30012565 30000345 30012581 30012581 30012581 30012583 30012581 30012581 30012581 30000352 30016126 30012567 30016654 30016126 30000345 30000345 30000345 30012567 30012585 30000352 30012581 30012590 30000352 30012590 30000362 30012585 30012581 30000362 30000362 30012581 30012581 30012585 30012585 30012573 30000345 30000409 30012574 30012574 30000075 30000415 30000287 30000350 30000075 30000438 30000359 30000294 30000294 30012577 30000407 DESCRIPTION CAP EL 10UF 50V M CAP SMD 100NF 16V K R (0603) CAP SMD 1NF 50V K R (0603) CAP SMD 220NF 16V K R (0603) CAP SMD 220NF 16V K R (0603) CAP SMD 1.5NF 50V K (0603) CAP SMD 1NF 50V K R (0603) CAP SMD 220NF 16V K R (0603) CAP SMD 100NF 16V K R (0603) CAP EL 3.3UF 50V M CAP EL 10UF 50V M CAP EL 10UF 50V M CAP SMD 56PF 50V J CH (0603) CAP EL 10UF 50V M CAP SMD 1NF 50V K R (0603) CAP SMD 1NF 50V K R (0603) CAP SMD 1.8PF 50V J CH (0603) CAP SMD 1.8PF 50V J CH (0603) CAP EL 10UF 50V M CAP SMD 1NF 50V K R (0603) CAP SMD 1NF 50V K R (0603) CAP SMD 1NF 50V K R (0603) CAP SMD 1.5NF 50V K (0603) CAP SMD 1NF 50V K R (0603) CAP SMD 1NF 50V K R (0603) CAP SMD 1NF 50V K R (0603) CAP EL 100UF 16V M CAP SMD 220NF 16V K R (0603) CAP SMD 220PF 50V J (0603) CAP SMD 100NF 16V K R (0603) CAP SMD 220NF 16V K R (0603) CAP EL 10UF 50V M CAP EL 10UF 50V M CAP EL 10UF 50V M CAP SMD 220PF 50V J (0603) CAP SMD 2.2NF 50V K R (0603) CAP EL 100UF 16V M CAP SMD 1NF 50V K R (0603) CAP SMD 47NF 50V K (0603) CAP EL 100UF 16V M CAP SMD 47NF 50V K (0603) CAP EL 1UF 50V M CAP SMD 2.2NF 50V K R (0603) CAP SMD 1NF 50V K R (0603) CAP EL 1UF 50V M CAP EL 1UF 50V M CAP SMD 1NF 50V K R (0603) CAP SMD 1NF 50V K R (0603) CAP SMD 2.2NF 50V K R (0603) CAP SMD 2.2NF 50V K R (0603) CAP SMD 47PF 50V J (0603) CAP EL 10UF 50V M CAP EL 470UF 25V M CAP SMD 470PF 50V J (0603) CAP SMD 470PF 50V J (0603) CAP MKT 100NF 250V K (DC) CAP EL 4.7UF 250V M CAP CER 10NF 50V K B CAP EL 10UF 250V M CAP MKT 100NF 250V K (DC) CAP CER 2.2NF 2KV CAP EL 1000UF 16V M CAP SMD 100NF 50V K (0805) CAP SMD 100NF 50V K (0805) CAP SMD 560PF 50V J (0603) CAP EL 470UF 16V M SN CODE EX CODE AA AB AA AB AA AB AA AB AA AB AA AA AA AB AA AB AA AB AA AB AA AB AA AB AA AA AA AB AA AB AA AB AA AA AA AA AA AB AA AB AA AB AA AB AA AA AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AA AA AB AA AA AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AD AA AA AA AA AA AD AA AC AA AA AA AD AA AD AA AD AA AC AA AB AA AB AA AA AA AC 29LF-92E ! REF No. C916 C918 C919 C920 C921 C931 C932 C934 PARTS 30000352 30012577 30012577 30012577 30000294 30000075 30000367 30012603 DESCRIPTION CAP EL 100UF 16V M CAP SMD 560PF 50V J (0603) CAP SMD 560PF 50V J (0603) CAP SMD 560PF 50V J (0603) CAP SMD 100NF 50V K (0805) CAP MKT 100NF 250V K (DC) CAP EL 1UF 250V M CAP SMD 100NF 25V K R (0603) R100 R100 R100 R101 R101 R101 R102 R102 R103 R103 R104 R104 R105 R105 R105 R106 R106 R106 R107 R107 R108 R108 R109 R110 R112 R116 R117 R118 R119 R122 R126 R127 R129 R130 R131 R132 R133 R134 R137 R138 R139 R140 R141 R142 R143 R144 R145 R146 R147 R148 R149 R150 R151 R153 R154 R155 R156 RESISTORS 30000689 RES CF 1/4W 3.9K J 30000594 RES CF 1/4W 22K J 30000718 RES CF 1/4W 4.7K J 30000526 RES CF 1/4W 1.5K J 30000712 RES CF 1/4W 470R J 30000896 RES MF 1/4W 160K G 30000770 RES CF 1/4W 680R J 30000594 RES CF 1/4W 22K J 30000712 RES CF 1/4W 470R J 30000712 RES CF 1/4W 470R J 30000580 RES CF 1/4W 22R J 30000650 RES CF 1/4W 33R J 30000580 RES CF 1/4W 22R J 30000650 RES CF 1/4W 33R J 30000982 RES MF 1/4W 4.7K J 30000471 RES CF 1/4W 10K J 30000471 RES CF 1/4W 10K J 30000593 RES SMD 1/10W 2.2K J (0805) 30000580 RES CF 1/4W 22R J 30000551 RES CF 1/4W 18R J 30000471 RES CF 1/4W 10K J 30000452 RES CF 1/4W 10R J 30000551 RES CF 1/4W 18R J 30012657 RES SMD 1/16W 1K J (0603) 30012657 RES SMD 1/16W 1K J (0603) 30001173 RES MO 1W 0.47R J 30001257 RES MG SAFE 1/2W 4.7M J 30000580 RES CF 1/4W 22R J 30012641 RES SMD 1/16W 10K J (0603) 30014022 RES SMD 1/16W 47R J (0603) 30012641 RES SMD 1/16W 10K J (0603) 30012692 RES SMD 1/16W 4.7K J (0603) 30012692 RES SMD 1/16W 4.7K J (0603) 30012641 RES SMD 1/16W 10K J (0603) 30000886 RES MF 1/4W 1.5K F 30000886 RES MF 1/4W 1.5K F 30000880 RES MF 1/4W 130K F 30000575 RES SMD 1/10W 2K J 30000481 RES CF 1/4W 1M J 30000660 RES CF 1/4W 3.3K J 30000593 RES SMD 1/10W 2.2K J (0805) 30001174 RES MO 2W 0.47R J 30012641 RES SMD 1/16W 10K J (0603) 30012657 RES SMD 1/16W 1K J (0603) 30020455 RES SMD 1/16W 1.5K F (0603) 30000480 RES SMD 1/10W 100K J (0805) 30020457 RES SMD 1/16W 910R F (0603) 30012697 RES SMD 1/16W 5.1K J (0603) 30020455 RES SMD 1/16W 1.5K F (0603) 30020457 RES SMD 1/16W 910R F (0603) 30012657 RES SMD 1/16W 1K J (0603) 30000466 RES CF 1/4W 1K J 30012641 RES SMD 1/16W 10K J (0603) 30012692 RES SMD 1/16W 4.7K J (0603) 30012641 RES SMD 1/16W 10K J (0603) 30012641 RES SMD 1/16W 10K J (0603) 30012641 RES SMD 1/16W 10K J (0603) SN CODE EX CODE AA AB AA AA AA AA AA AA AA AB AA AD AA AB AA AB ! ! AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AB AB AB AB AB AA AB AB AB AB AB AB AB AB AA AB AB AB AB AB AB AB AB AB AB AB AD AB AB AA AB AB AB AB AB AB AA AB AB AB AB AB AB AB AA AB AA AA AA AA AB AB AB AB AB AB AB 12 REF No. R157 R158 R161 R162 R164 R165 R166 R167 R168 R200 R201 R202 R203 R204 R205 R206 R207 R208 R209 R210 R211 R215 R217 R219 R220 R221 R222 R230 R231 R232 R233 R234 R235 R236 R237 R238 R239 R241 R242 R247 R248 R254 R256 R259 R260 R261 R265 R266 R267 R268 R269 R270 R272 R274 R276 R277 R278 R279 R280 R281 R282 R283 R284 R285 R286 R288 PARTS DESCRIPTION 30012641 RES SMD 1/16W 10K J (0603) 30012657 RES SMD 1/16W 1K J (0603) 30012657 RES SMD 1/16W 1K J (0603) 30000494 RES SMD 1/10W 120R J (0805) 30000593 RES SMD 1/10W 2.2K J (0805) 30001159 RES MO 1W 0.33R J 30012641 RES SMD 1/16W 10K J (0603) 30018085 CAP VAR SAFE 510V K MFCN14D511 30018085 CAP VAR SAFE 510V K MFCN14D511 30012713 RES SMD 1/16W 75R J (0603) 30012713 RES SMD 1/16W 75R J (0603) 30012713 RES SMD 1/16W 75R J (0603) 30012713 RES SMD 1/16W 75R J (0603) 30012713 RES SMD 1/16W 75R J (0603) 30012713 RES SMD 1/16W 75R J (0603) 30000459 RES CF 1/4W 100R J 30000459 RES CF 1/4W 100R J 30012510 RES SMD 1/16W 100R J (0603) 30012510 RES SMD 1/16W 100R J (0603) 30012662 RES SMD 1/16W 2.7K J (0603) 30012692 RES SMD 1/16W 4.7K J (0603) 30012713 RES SMD 1/16W 75R J (0603) 30012641 RES SMD 1/16W 10K J (0603) 30000792 RES CF 1/4W 75R J 30012641 RES SMD 1/16W 10K J (0603) 30000792 RES CF 1/4W 75R J 30012641 RES SMD 1/16W 10K J (0603) 30012641 RES SMD 1/16W 10K J (0603) 30000792 RES CF 1/4W 75R J 30012713 RES SMD 1/16W 75R J (0603) 30012657 RES SMD 1/16W 1K J (0603) 30012702 RES SMD 1/16W 560R J (0603) 30000655 RES CF 1/4W 330R J 30012713 RES SMD 1/16W 75R J (0603) 30012641 RES SMD 1/16W 10K J (0603) 30012641 RES SMD 1/16W 10K J (0603) 30012713 RES SMD 1/16W 75R J (0603) 30012510 RES SMD 1/16W 100R J (0603) 30012696 RES SMD 1/16W 47K J (0603) 30000500 RES CF 1/4W 12K J 30012641 RES SMD 1/16W 10K J (0603) 30012657 RES SMD 1/16W 1K J (0603) 30012655 RES SMD 1/16W 180R J (0603) 30000593 RES SMD 1/10W 2.2K J (0805) 30012669 RES SMD 1/16W 22K J (0603) 30012677 RES SMD 1/16W 3.3K J (0603) 30000459 RES CF 1/4W 100R J 30000459 RES CF 1/4W 100R J 30012657 RES SMD 1/16W 1K J (0603) 30012641 RES SMD 1/16W 10K J (0603) 30012641 RES SMD 1/16W 10K J (0603) 30012641 RES SMD 1/16W 10K J (0603) 30012713 RES SMD 1/16W 75R J (0603) 30012702 RES SMD 1/16W 560R J (0603) 30000593 RES SMD 1/10W 2.2K J (0805) 30012679 RES SMD 1/16W 3.9K J (0603) 30012713 RES SMD 1/16W 75R J (0603) 30012713 RES SMD 1/16W 75R J (0603) 30012713 RES SMD 1/16W 75R J (0603) 30012673 RES SMD 1/16W 270R J (0603) 30012668 RES SMD 1/16W 220R J (0603) 30012707 RES SMD 1/16W 680R J (0603) 30012684 RES SMD 1/16W 330R J (0603) 30012707 RES SMD 1/16W 680R J (0603) 30012707 RES SMD 1/16W 680R J (0603) 30000770 RES CF 1/4W 680R J SN CODE EX CODE AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AD AA AD AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AA AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AA AA AB AA AB AA AA AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AA AA AB AA AB AA AB AA AB AA AB AA AB AA AA AA AB AA AA AA AB AA AB AA AB 29LF-92E REF No. R289 R299 R308 R310 R316 R317 R318 R326 R327 R330 R334 R336 R337 R338 R342 R343 R349 R350 R351 R352 R353 R354 R355 R356 R357 R358 R359 R400 R404 R406 R409 R411 R412 R413 R414 R415 R416 R417 R418 R419 R420 R421 R422 R423 R424 R425 R426 R427 R428 R429 R430 R503 R504 R505 R506 R507 R508 R509 R510 R512 R513 R516 R518 R519 R520 R521 PARTS DESCRIPTION 30012707 RES SMD 1/16W 680R J (0603) 30012510 RES SMD 1/16W 100R J (0603) 30012641 RES SMD 1/16W 10K J (0603) 30012713 RES SMD 1/16W 75R J (0603) 30012641 RES SMD 1/16W 10K J (0603) 30000792 RES CF 1/4W 75R J 30012657 RES SMD 1/16W 1K J (0603) 30000815 RES CF 1/4W 8.2K J 30000480 RES SMD 1/10W 100K J (0805) 30012657 RES SMD 1/16W 1K J (0603) 30012713 RES SMD 1/16W 75R J (0603) 30000466 RES CF 1/4W 1K J 30000466 RES CF 1/4W 1K J 30000466 RES CF 1/4W 1K J 30012657 RES SMD 1/16W 1K J (0603) 30012692 RES SMD 1/16W 4.7K J (0603) 30012641 RES SMD 1/16W 10K J (0603) 30012510 RES SMD 1/16W 100R J (0603) 30012510 RES SMD 1/16W 100R J (0603) 30012698 RES SMD 1/16W 5.6K J (0603) 30012685 RES SMD 1/16W 33K J (0603) 30012677 RES SMD 1/16W 3.3K J (0603) 30012643 RES SMD 1/16W 120R J (0603) 30012707 RES SMD 1/16W 680R J (0603) 30012644 RES SMD 1/16W 12K J (0603) 30012655 RES SMD 1/16W 180R J (0603) 30012669 RES SMD 1/16W 22K J (0603) 30012669 RES SMD 1/16W 22K J (0603) 30012692 RES SMD 1/16W 4.7K J (0603) 30012650 RES SMD 1/16W 15K J (0603) 30012713 RES SMD 1/16W 75R J (0603) 30012657 RES SMD 1/16W 1K J (0603) 30012657 RES SMD 1/16W 1K J (0603) 30012713 RES SMD 1/16W 75R J (0603) 30012713 RES SMD 1/16W 75R J (0603) 30012679 RES SMD 1/16W 3.9K J (0603) 30012695 RES SMD 1/16W 470R J (0603) 30012695 RES SMD 1/16W 470R J (0603) 30012695 RES SMD 1/16W 470R J (0603) 30012695 RES SMD 1/16W 470R J (0603) 30012695 RES SMD 1/16W 470R J (0603) 30012695 RES SMD 1/16W 470R J (0603) 30012695 RES SMD 1/16W 470R J (0603) 30012695 RES SMD 1/16W 470R J (0603) 30012695 RES SMD 1/16W 470R J (0603) 30012695 RES SMD 1/16W 470R J (0603) 30012695 RES SMD 1/16W 470R J (0603) 30012661 RES SMD 1/16W 2.4K J (0603) 30012510 RES SMD 1/16W 100R J (0603) 30012510 RES SMD 1/16W 100R J (0603) 30012510 RES SMD 1/16W 100R J (0603) 30012510 RES SMD 1/16W 100R J (0603) 30012510 RES SMD 1/16W 100R J (0603) 30000471 RES CF 1/4W 10K J 30000471 RES CF 1/4W 10K J 30012696 RES SMD 1/16W 47K J (0603) 30012696 RES SMD 1/16W 47K J (0603) 30012696 RES SMD 1/16W 47K J (0603) 30012696 RES SMD 1/16W 47K J (0603) 30012668 RES SMD 1/16W 220R J (0603) 30012662 RES SMD 1/16W 2.7K J (0603) 30012692 RES SMD 1/16W 4.7K J (0603) 30012662 RES SMD 1/16W 2.7K J (0603) 30000466 RES CF 1/4W 1K J 30012650 RES SMD 1/16W 15K J (0603) 30012679 RES SMD 1/16W 3.9K J (0603) SN CODE EX CODE AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AA AA AA AA AA AA AB AA AB AA AA AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AA AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AA AA AB AA AB AA AB AA AB AA AB AA AB 13 ! ! ! ! ! ! REF No. R522 R523 R524 R526 R527 R528 R533 R535 R537 R538 R539 R540 R541 R548 R549 R550 R553 R554 R555 R561 R564 R565 R566 R567 R568 R571 R582 R585 R586 R587 R588 R589 R590 R591 R600 R601 R603 R603+ R604 R605 R607 R608 R611 R612 R613 R614 R616 R618 R621 R622 R623 R624 R625 R626 R627 R628 R629 R630 R631 R632 R636 R637 R638 R639 R640 R641 PARTS DESCRIPTION 30012692 RES SMD 1/16W 4.7K J (0603) 30012712 RES SMD 1/16W 8.2K J (0603) 30012679 RES SMD 1/16W 3.9K J (0603) 30012679 RES SMD 1/16W 3.9K J (0603) 30012679 RES SMD 1/16W 3.9K J (0603) 30012650 RES SMD 1/16W 15K J (0603) 30012685 RES SMD 1/16W 33K J (0603) 30012641 RES SMD 1/16W 10K J (0603) 30000466 RES CF 1/4W 1K J 30012508 RES SMD 1/16W 1.8K J (0603) 30012508 RES SMD 1/16W 1.8K J (0603) 30012508 RES SMD 1/16W 1.8K J (0603) 30012662 RES SMD 1/16W 2.7K J (0603) 30012641 RES SMD 1/16W 10K J (0603) 30012657 RES SMD 1/16W 1K J (0603) 30012679 RES SMD 1/16W 3.9K J (0603) 30012695 RES SMD 1/16W 470R J (0603) 30012692 RES SMD 1/16W 4.7K J (0603) 30012506 RES SMD 1/16W 1.5K J (0603) 30012510 RES SMD 1/16W 100R J (0603) 30012692 RES SMD 1/16W 4.7K J (0603) 30012510 RES SMD 1/16W 100R J (0603) 30012641 RES SMD 1/16W 10K J (0603) 30000459 RES CF 1/4W 100R J 30000459 RES CF 1/4W 100R J 30012657 RES SMD 1/16W 1K J (0603) 30012641 RES SMD 1/16W 10K J (0603) 30012641 RES SMD 1/16W 10K J (0603) 30012641 RES SMD 1/16W 10K J (0603) 30012641 RES SMD 1/16W 10K J (0603) 30012641 RES SMD 1/16W 10K J (0603) 30012641 RES SMD 1/16W 10K J (0603) 30012679 RES SMD 1/16W 3.9K J (0603) 30012711 RES SMD 1/16W 75K J (0603) 30012510 RES SMD 1/16W 100R J (0603) 30000470 RES CF 1/2W 10K J 30001242 RES FUSE 1/4W 47R J 30006712 FERRITE BEAD 3.5X4.7X0.8 30001244 RES FUSE SAFE 1/2W 0.47R J 30000927 RES MF 1/4W 220K J 30012695 RES SMD 1/16W 470R J (0603) 30001100 RES MO 1W 150R J 30001244 RES FUSE SAFE 1/2W 0.47R J 30000471 RES CF 1/4W 10K J 30001234 RES FUSE 2W 33R J 30001244 RES FUSE SAFE 1/2W 0.47R J 30018904 RES MO 5W 4.7k J 30001233 RES FUSE SAFE 1W 2.7R J 30012696 RES SMD 1/16W 47K J (0603) 30012696 RES SMD 1/16W 47K J (0603) 30012641 RES SMD 1/16W 10K J (0603) 30012692 RES SMD 1/16W 4.7K J (0603) 30000480 RES SMD 1/10W 100K J (0805) 30012692 RES SMD 1/16W 4.7K J (0603) 30000480 RES SMD 1/10W 100K J (0805) 30012657 RES SMD 1/16W 1K J (0603) 30012674 RES SMD 1/16W 27K J (0603) 30000872 RES MF 1/4W 120K F 30000872 RES MF 1/4W 120K F 30014465 RES SMD 1/16W 2.7K F (603) 30012641 RES SMD 1/16W 10K J (0603) 30012657 RES SMD 1/16W 1K J (0603) 30012674 RES SMD 1/16W 27K J (0603) 30001162 RES MO 1W 390R J 30001134 RES MO 2W 2.2R J 30000965 RES MF 1/2W 0.33R J SN CODE EX CODE AA AB AA AB AA AB AA AB AA AB AA AB AA AA AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AA AA AB AA AA AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AC AA AB AA AD AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AA AA AA AA AA AA AB AA AB AA AB AA AB AA AB AA AA 29LF-92E ! REF No. R644 R645 R646 R647 R648 R649 R650 R652 R653 R654 R655 R656 R657 R658 R700 R701 R702 R703 R704 R705 R710 R713 R714 R715 R718 R719 R723 R724 R725 R726 R742 R746 R747 R749 R753 R754 R755 R756 R759 R760 R762 R763 R765 R766 R793 R794 R815 R817 R818 R819 R820 R900 R901 R902 R903 R904 R905 R906 R907 R908 R909 R910 R911 R912 R913 R914 PARTS DESCRIPTION 30000649 RES CF 1/2W 33R J 30000580 RES CF 1/4W 22R J 30012654 RES SMD 1/16W 180K J (0603) 30012650 RES SMD 1/16W 15K J (0603) 30012658 RES SMD 1/16W 1M J (0603) 30001228 RES FUSE SAFE 1/2W 2.2R J 30001082 RES MO 1/2W 1K J 30000848 RES MF 1/4W 1K F 30012509 RES SMD 1/16W 100K J (0603) 30012708 RES SMD 1/16W 68K J (0603) 30012674 RES SMD 1/16W 27K J (0603) 30012641 RES SMD 1/16W 10K J (0603) 30000466 RES CF 1/4W 1K J 30000466 RES CF 1/4W 1K J 30012695 RES SMD 1/16W 470R J (0603) 30012695 RES SMD 1/16W 470R J (0603) 30012657 RES SMD 1/16W 1K J (0603) 30012510 RES SMD 1/16W 100R J (0603) 30012510 RES SMD 1/16W 100R J (0603) 30012510 RES SMD 1/16W 100R J (0603) 30012657 RES SMD 1/16W 1K J (0603) 30012510 RES SMD 1/16W 100R J (0603) 30012510 RES SMD 1/16W 100R J (0603) 30012657 RES SMD 1/16W 1K J (0603) 30012657 RES SMD 1/16W 1K J (0603) 30012657 RES SMD 1/16W 1K J (0603) 30000459 RES CF 1/4W 100R J 30012510 RES SMD 1/16W 100R J (0603) 30012657 RES SMD 1/16W 1K J (0603) 30012657 RES SMD 1/16W 1K J (0603) 30012692 RES SMD 1/16W 4.7K J (0603) 30012692 RES SMD 1/16W 4.7K J (0603) 30012641 RES SMD 1/16W 10K J (0603) 30012709 RES SMD 1/16W 7.5K J (0603) 30014076 RES SMD 1/16W 4.7R J (0603) 30012709 RES SMD 1/16W 7.5K J (0603) 30014076 RES SMD 1/16W 4.7R J (0603) 30012641 RES SMD 1/16W 10K J (0603) 30012712 RES SMD 1/16W 8.2K J (0603) 30012702 RES SMD 1/16W 560R J (0603) 30012712 RES SMD 1/16W 8.2K J (0603) 30012702 RES SMD 1/16W 560R J (0603) 30012669 RES SMD 1/16W 22K J (0603) 30012669 RES SMD 1/16W 22K J (0603) 30012657 RES SMD 1/16W 1K J (0603) 30012657 RES SMD 1/16W 1K J (0603) 30012644 RES SMD 1/16W 12K J (0603) 30012641 RES SMD 1/16W 10K J (0603) 30000723 RES CF 1/4W 47K J 30012679 RES SMD 1/16W 3.9K J (0603) 30012696 RES SMD 1/16W 47K J (0603) 30000788 RES CF 1/4W 6.8M J 30000459 RES CF 1/4W 100R J 30000459 RES CF 1/4W 100R J 30000459 RES CF 1/4W 100R J 30000535 RES CF 1/2W 150K J 30000477 RES CF 1/4W 100K J 30000477 RES CF 1/4W 100K J 30023197 RES CC 1W 1.5K K 30023197 RES CC 1W 1.5K K 30000477 RES CF 1/4W 100K J 30023197 RES CC 1W 1.5K K 30000466 RES CF 1/4W 1K J 30000458 RES CF 1/2W 100R J 30021483 RES CC 1W 2.2K K 30000459 RES CF 1/4W 100R J SN CODE EX CODE AA AB AA AB AG AS AA AB AA AA AA AB AA AB AA AB AA AB AA AA AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AA AA AA AA AA AA AA AA AB AA AB AA AA AA AB AA AA AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AD AA AD AA AB AA AD AA AB AA AB AA AD AA AB ! ! ! 14 REF No. R915 R916 R917 R919 R920 R921 R922 R923 R925 R926 R927 R928 R930 R931 R932 R933 PARTS DESCRIPTION 30012649 RES SMD 1/16W 150R J (0603) 30014128 RES SMD 1/16W 33R J (0603) 30000583 RES CF 1/4W 220R J 30012644 RES SMD 1/16W 12K J (0603) 30012698 RES SMD 1/16W 5.6K J (0603) 30012649 RES SMD 1/16W 150R J (0603) 30014128 RES SMD 1/16W 33R J (0603) 30000583 RES CF 1/4W 220R J 30012649 RES SMD 1/16W 150R J (0603) 30014128 RES SMD 1/16W 33R J (0603) 30000583 RES CF 1/4W 220R J 30012510 RES SMD 1/16W 100R J (0603) 30000477 RES CF 1/4W 100K J 30012667 RES SMD 1/16W 220K J (0603) 30012707 RES SMD 1/16W 680R J (0603) 30012707 RES SMD 1/16W 680R J (0603) SN CODE EX CODE AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB . . . . . PRINTED WIRING BOARD MODULES 20155578 CHS.ASSY.45-317D22514121121C1125L (29LF92EC Mother Unit) 20155579 CHS.ASSY.45-317C21514121121C1125L (29LF92EIT Mother Unit) 20160076 CRT B.ASSY.TP45B-5-SI.FOC.(AK45)SHARP(RF (CRT Unit) 20154617 MD.ASY.FAV107-2962 STR. (AK45) (Front AV Unit) 20153523 MD.ASY.SB119-3 LED+TK 2962 (AK45) (Front SW Unit) BP BP AR AM AM CE CE BB AY AY . . OWNERS MANUAL 50053219 I/B SHARP 29LF92EC P/AK45/1548/EPMÇSRR 50053294 I/B SHARP 29LF92E(IT) P/AK45/1548/ITA AG AB AT AF . . 29LF92EC MISCELLANEOUS PARTS 20168548 LBL.CART.BOX SHARP 29LF92EC "45" 20168550 LBL.BCK.CVR.SHA.EL.SHARP 29LF92EC"45"ENG AA AA AC AC . . . . . 50053310 50053312 20168627 50053313 20168629 29LF92EIT MISCELLANEOUS PARTS WARRANTY APPROVAL SHARP 29LF92E(IT) FREQU./CHAN.TABLE SHARP 29LF92E(IT)(AK45 LBL.CART.BOX SHARP 29LF92E(IT) "45" LABEL APPROVAL SHARP 29LF92E(IT)AK45 LBL.BCK.CVR.SHA.EL.SHARP 29LF92E"45" AA AA AA AA AA AA AB AC AC AC . . . . . . . . . . . . . . . . . . . . . . . . . . COMMON MISCELLANEOUS PARTS 30001862 SOCKET IC 52P (SHRINK) (IC500) 20146961 BACK CVR.2962 EKO2GRAY (I) 30028208 POWER CORD SAFE EURO 2.2M SHARP W/FILTER 20152919 SNOW BOX ASSY 2962 20146958 SNOW BOX TOP 2962 20146959 SNOW BOX BOTTOM 2962 20152921 BUTTON ASSY 2962 (M88/P) 20155351 BUTTON FUNCTION 2962 (M88/P) 35000013 SPRING ON/OFF SWITCH 40017674 LED LENS PRE-AMP XX64W (I) 20108124 BACK DOOR AK45/52 (I) 35000212 SCREW S C ZNSY YSMB 2.9*13 35000217 SCREW S C SYF YFMB 3.5*9.5 35005051 SCREW P C ZN RYSM 4x16 (HITACHI) (R:16) 35005084 SCREW C ZN RYAKB 6x30 35005418 SCREW P C ZN YSB 3.5x10 (KN1031 T35X10) 35008089 SCREW P C ZN YSMB 4*10 35008191 SCREW P C ZN YSMB 3*12 35009300 SCREW P C ZN FYSB 4X16 (D:11) 35010702 SCREW P C ZN YSB 4x20 (BEYAZ) 40000026 EJECTOR CLIP-CLAP 30013905 CNAS 2P/900 DIS W/BLKC+FER UL2547 AWG24 30027382 SPEAKER 7R 12W F/R 60x120MM-28&32" SHARP 40016872 SPEAKER BRACKET 286XW 35000136 FUSE HOLDER TK79-A (GRAY) 20155349 FRONT 2962 W/H SLV285S/M88(P)(PW/2U/S) AF AT AG AH AE AE AD AB AA AA AC AA AA AA AA AA AA AA AA AA AC AB AE AA AA AT AQ BE AT AV AP AP AM AF AB AD AH AB AB AB AB AA AA AA AB AA AH AG AP AE AD BE 29LF-92E ! ! REF No. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-B F100 J344 J388 JK100 JK101 NOT PL100 PL100 PL101 PL101 PL101 PL102 PL102 PL102 PL103 PL103 PL103 PL104 PL104 PL204 PL206 PL207 PL500 PL502 PL602 PL602 PL603 PL603 PL604 PL703 PL708 PL709 PL711 PARTS 20155352 20147023 35008850 35008850 35009382 35009471 40006731 40016134 40017363 40018111 40018612 70000331 30018087 35000217 30000225 20140466 30000285 30007728 30000285 30017312 30000225 30009833 40006432 30009005 20143026 50043776 20013018 50023173 40011046 40017676 40018356 40018611 30009834 30001731 30001996 30001971 30026584 30001902 30011742 30029258 30001792 30001838 30001795 30020137 30020137 30001830 30001792 30020137 30001792 30001839 30001792 30009317 30010921 30010039 30001830 30001783 30001784 30001792 30016483 30001829 30019083 30001850 30001839 30001762 30001764 30001836 DESCRIPTION CONTROL PANEL DOOR 2962 (M88/P) BRACKET BF 2962 (I) METAL WASHER XX6XW (SHARP) METAL WASHER XX6XW (SHARP) METAL WASHER (1.5x20) (SHARP) METAL BRACKET_2962 ISOLATION COTTON (9x25000mm) SPONGE SPEAKER BRACKET(2'') CABLE HOLDER 2162_SF SHARP CABLE HOLDER(WIRE CLIP TA10-3) RUBBER HOLDER_3.6 X 10 X 8.5 ADHESIVE TAPE 75MM/660M (4125) CNAS 2P/350 TRFPFC DIS W/C SCREW S C SYF YFMB 3.5*9.5 CAP CER 220PF 50V J SL BRACKET CHS XX62-64W (I) V.0 CAP CER 1NF 100V KB CABLE 1P R2.6 50 W/CLIPS CAP CER 1NF 100V KB CABL 1P/450 DIS UL1672AWG22 CAP CER 220PF 50V J SL CABL 1P/100 SIS MOUNTING BUTTON (MB-10) IC 24C16 R/C 1548 SHARP (EKO2GRAY/I) (GRAY/S) LABEL LOT W/BARCODE (100X280) SHARP LBL.BCK.CVR.ASSY (TV) (WO/UL) LABEL LOT W/BARCODE (77X256) WIRE SADDLE (PINGOOD CHF-8) SPEAKER GRILL ASSEMBLY (R)_2962 LOGO SHARP (D.C.-SILVER) 29" RF SPEAKER GRILL ASSEMBLY (L)_2962 CABL 1P/60 SIS FUSE SAFE 2.5A 250V 5*20MM FIXED COIL 22UH Q40 K FERRITE BEAT (805) BLM21A601S TV JACK BOARD JXTI046 JACK HEADPHONE STEREO WO/SW CABL 1P/25 SIS CNAS 6P/150 TB FLT W/C UL2468AWG24 CONN HEADER 2P 7.5MM TOP WHT CONN HEADER 3P 2.5MM TOP YELLOW SD CONN HEADER 3P 5/7.5MM TOP WHT CNAS 600 FAV SVHS W/DC+FER CNAS 600 FAV SVHS W/DC+FER CONN HEADER 2P 2.5MM TOP BLUE SD CONN HEADER 2P 7.5MM TOP WHT CNAS 600 FAV SVHS W/DC+FER CONN HEADER 2P 7.5MM TOP WHT CONN HEADER 3P 2.5MM TOP GREEN SD CONN HEADER 2P 7.5MM TOP WHT CNAS 3P/700 FLT W/BLK C+FER UL2468AWG24 DOUBLE-DECK SCART SOCKET CONN HEADER 8P 2.5MM TOP WHT CONN HEADER 2P 2.5MM TOP BLUE SD CONN HEADER 5P 2.5MM TOP BD CONN HEADER 6P 2.5MM TOP BD CONN HEADER 2P 7.5MM TOP WHT CNAS 2P/600 HRZ DIS W/C UL1672AWG24 CONN HEADER 2P 2.5MM TOP WHT SD CNAS 2P/600 SIS W/C+FER UL1007AWG24 CONN HEADER 6P 2.5MM TOP WHT SD CONN HEADER 3P 2.5MM TOP GREEN SD CONN HEADER 2P 2.5MM(9.7MM) TOP CONN HEADER 2P 2.5MM(9.7MM) TOP BLACK CONN HEADER 3P 2.5MM TOP BLACK SD SN CODE EX CODE AC AH AA AA AA AB AA AB AA AA AC AK AA AC AA AC AA AC AA AC AA AD AA AB AA AE AA AB AA AB AD AM AA AA AA AC AA AA AA AB AA AB AA AB AA AB AF AQ AM AY AA AC AA AB AA AC AA AB AM AY AD AL AM AY AA AB AA AC AA AB AA AD AG AS AC AH AA AB AA AD AA AC AA AC AA AC AF AQ AF AQ AA AB AA AC AF AQ AA AC AA AC AA AC AC AG AD AM AA AB AA AB AA AC AA AC AA AC AA AE AA AB AB AF AA AC AA AC AA AC AA AC AA AB 15 ! ! ! REF No. PL901 PL902 PL902 PL903 PL903 PL904 PL905 PL905 PL909 PL909 S224 S225 S226 S227 SG901 SG902 SG903 SG904 SG905 SW100 SW101 SW102 SW103 SW104 SW104 TH101 PARTS DESCRIPTION 30028447 SOCKET CRT SAFE NARROWNECK W/GND INCHANG 30010039 CONN HEADER 8P 2.5MM TOP WHT 30027546 CNAS 5P/350 SHL+3P/350 SIS RGB W/DC+FER 30001850 CONN HEADER 6P 2.5MM TOP WHT SD 30030432 CNAS 6P-4P/500+1P/850 SIS W/3C+FR UL1007 35000176 EYELET BR 2*3MM 35000176 EYELET BR 2*3MM 35000135 TEST PIN 1.1MM 35000176 EYELET BR 2*3MM 35000135 TEST PIN 1.1MM 30000792 RES CF 1/4W 75R J 30012713 RES SMD 1/16W 75R J (0603) 30012713 RES SMD 1/16W 75R J (0603) 30012713 RES SMD 1/16W 75R J (0603) 30000428 SPARK GAP 300V 30000428 SPARK GAP 300V 30000428 SPARK GAP 300V 30000428 SPARK GAP 300V 30021532 SPARK GAP 1500V 30002181 SWITCH TACT(4) 30002181 SWITCH TACT(4) 30002181 SWITCH TACT(4) 30002181 SWITCH TACT(4) 30017848 SWITCH SAFE ON/OFF 4A/128A JVC(PANASONI) 40018112 BRACKET POWER SWITCH (PINGOOD HS-5) 30001268 THERMISTOR 3P SN CODE EX CODE AA AE AA AB AD AM AA AC AA AC AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AA AB AB AG AB AG AB AG AB AG AC AG AA AC AA AC AA AC AA AC AC AH AA AC AD AM How to update the Technical Information appeared on this Service Manual 1. Web site: https://www.vestelservice.com 2. Select: Technical Support 3. Login: 101278 4. Password: SHPII278 By this access you can consult the latest schematic diagram or request the Parts Listing of a concrete Production Date / Serial Number. By this way it can be also consulted the issued Technical Reports (Service Bulletins). 29LF-92E No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher. Technical information and Production: Vestel Electronik AS PRINTED BY: ON: Think Ecology, please use Technical information re-issued: SHARP ELECTRONICA ESPAÑA S.A. Service Manual Group Engineering Dept. Polígono Industrial Can Sant Joan 08190 Sant Cugat del Vallès Barcelona Spain RECYCLED PAPER 16 www.s-manuals.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Producer : Acrobat Distiller 5.0.5 (Windows) Create Date : 2004:07:28 12:39:57Z Modify Date : 2013:09:18 20:39:34+03:00 Metadata Date : 2013:09:18 20:39:34+03:00 Creator Tool : PageMaker 7.0 Format : application/pdf Creator : Title : Sharp 29LF-92E - Service Manual. www.s-manuals.com. Description : Subject : Sharp 29LF-92E - Service Manual. www.s-manuals.com. Document ID : uuid:6481eb21-ca0a-43d3-a835-a1b27b3c0fdb Instance ID : uuid:86cdf685-0784-4553-ad63-1a3eebebbe4a Has XFA : No Page Count : 80 Keywords : Sharp, 29LF-92E, -, Service, Manual., www.s-manuals.com. Warning : [Minor] Ignored duplicate Info dictionaryEXIF Metadata provided by EXIF.tools