HCD MD333 Sony_HCD MD333_service_manual Sony Service Manual

User Manual: sony_HCD-MD333_service_manual

Open the PDF directly: View PDF .
Page Count: 92

COVER
SELF-DIAGNOSIS FUNCTION
SERVICING NOTE
GENERAL
DISASSEMBLY
SERVICE MODE
TEST MODE
ELECTRICAL ADJUSTMENTS
DIAGRAMS
EXPLODED VIEWS
ELECTRICAL PARTS LIST
SUPPLEMENT-1

– 1 –

HCD-MD333

SPECIFICATIONS

SERVICE MANUAL

COMPACT DISC DECK RECEIVER

— Continued on next page —

US Model

Canadian Model

AEP Model

UK Model

E Model

Australian Model

Tourist Model

HCD-MD333 is the amplifier, CD, MD and

tuner section in DHC-MD333.

Model Name Using Similar Mechanism NEW

Mechanism Type CDM13C-5BD19

Base Unit Type BU-5BD19

Optical Pick-up Type KSS-213B/K-N

Model Name Using Similar Mechanism NEW

Mechanism Type MDM-3J

Optical Pick-up Type KSM-260A-JIN

SECTION

Ver 1.1 2001. 06

9-922-935-12

2001F0200-1

Sony Corporation

Home Audio Company

Shinagawa Tec Service Manual Production Group

– 2 –

– 3 –

SELF-DIAGNOSIS FUNCTION

The self-diagnosis function consists of error codes for users which are displayed automatically when errors occur, and error codes which

show the error history in the test mode during servicing. For details on how to view error codes for users, refer to the following box in the

instruction manual. For details on how to perform checks during servicing, refer to the following “Procedure for Using the Self-Diagnosis

Function (Error History Display Mode)”.

Procedure for Using the Self-Diagnosis Function (Error History Display Mode)

Note: Perform the self-diagnosis function in the “error history display mode” in the test mode. The following describes the least required

steps. Be careful not to enter other modes by mistake. If other modes are set accidentally, press the ^ (CD) button to exit that

mode.

1. With the power off, press the ^ (MD) button while pressing the PLAY MODE button.

2. Rotate the VOLUME knob until “ERR DP MODE” is displayed.

3. Pressing the p (CD) button sets the error history mode and displays “total rec”.

4. Select the contents to be displayed or executed using the VOLUME knob.

5. Pressing the 6 (CD) button displays or executes the contents selected.

6. Pressing the 6 (CD) button another time returns to step 4.

7. Pressing the ^ (CD) button displays “ERR DP MODE” and exits the error history mode.

8. To exit the test mode, press the REPEAT button. The unit sets into the STANDBY state, and the test mode ends.

– 4 –

ITEMS OF ERROR HISTORY MODE ITEMS AND CONTENTS

Selecting the Test Mode

Display

total rec

total play

retry err

total err

err history

er refresh?

Details of History

No error

Disc error. Cannot read PTOC

(Disc is ejected out)

Disc error. UTOC error

(Disc is not ejected out)

Loading error

Cannot read address (Servo has deviated)

Displays the recording time in the form of “rππππππh”.

The displayed time is the total number of hours the laser is high power, which is about one-fourth of the actual

recording time. The time is displayed in decimal digits between 0h to 65535h.

Displays the playback time in the form of “pππππππh”.

The displayed time is the total actual play time. The paused time is not counted. The time is displayed in decimal

digits between 0h to 65535h.

Displays the total number of retries during recording and retry errors during playback in the form of “rππpππ”.

“r” indicates the retries during recording while “p” indicates the retry errors during playback. The number of

retries is displayed in hexadecimal digits between 00 to FF.

Displays the total number of errors in the form of “total ππ”.

The number of errors is displayed in hexadecimal digits between 00 to FF.

Displays the 10 latest errors in the form of “0π E@@”.

The π indicates the history number. The smaller the number, the newer is the error. (00 is the latest error.)

The @@ indicates the error code. Refer to the following table for details. Rotate the VOLUME knob to switch

the error history.

Mode which erases all the error histories.

The error history serves as a reference for when to replace the optical pick-up. Perform this procedure when the

optical pick-up has been replaced in order to erase past error histories and not at other times. Press the p (CD)

button when “er refresh??” is displayed. The history will be erased and “Complete!” will be displayed momentarily.

Be sure to check the following when this mode has been executed.

• Check that the data has been erased.

• Perform recording and playback, and check that the mechanism operates normally.

Table of Error Codes

Error Code

E00

E01

E02

E03

E04

E05

E06

E07

E08

E09

E0A

FOK has deviated

Unfocused (Servo has deviated)

Recording retry

Recording retry error

Play retry error

(Access error)

Playback retry error (C2 error)

Details of Error Error Code Details of Error

– 5 –

CAUTION

Use of controls or adjustments or performance of procedures

other than those specified herein may result in hazardous ra-

diation exposure.

Notes on chip component replacement

• Never reuse a disconnected chip component.

• Notice that the minus side of a tantalum capacitor may be

damaged by heat.

Flexible Circuit Board Repairing

• Keep the temperature of soldering iron around 270˚C

during repairing.

• Do not touch the soldering iron on the same conductor of the

circuit board (within 3 times).

• Be careful not to apply force on the conductor when soldering

or unsoldering.

Laser component in this product is capable of emitting radiation

exceeding the limit for Class 1.

This appliance is classified as

a CLASS 1 LASER product.

The CLASS 1 LASER PROD-

UCT MARKING is located on

the rear exterior.

This caution

label is located

inside the unit.

SAFETY-RELATED COMPONENT WARNING !!

COMPONENTS IDENTIFIED BY MARK ! OR DOTTED LINE

WITH MARK ! ON THE SCHEMATIC DIAGRAMS AND IN

THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.

REPLACE THESE COMPONENTS WITH SONY PARTS

WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS

MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.

ATTENTION AU COMPOSANT AYANT RAPPORT

À LA SÉCURITÉ!!

LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE ! SUR

LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES

PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE

FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS

QUE PAR DES PIÈCES SONY DONT LES NUMÉROS

SONT DONNÉS DANS CE MANUEL OU DANS LES

SUPPLÉMENTS PUBLIÉS PAR SONY.

PARTS No.

4-993-849-5π

4-993-849-6π

4-993-849-7π

MODEL

AEP, UK, EE model

MY, SP, JE, HK, AR, AUS model

US, CND model

MODEL IDENTIFICATION

— BACK PANEL —

• Abbreviation

CND : Canadian model

EE : East European model

HK : Hong Kong model

SP : Singapore model

MY : Malaysia model

AR : Argentine model

AUS : Australian model

JE : Tourist model

– 6 –

TABLE OF CONTENTS

1. SERVICING NOTE .......................................................... 7

2. GENERAL .......................................................................... 8

3. DISASSEMBLY

3-1. Case .................................................................................... 10

3-2. Front Panel/MD Mechanism Deck Section ........................ 10

3-3. Back Panel, Jack Board....................................................... 11

3-4. MD Mechanism Deck (MDM-3D) ..................................... 11

3-5. CD Mechanism Deck (CDM13C-5BD19).......................... 12

3-6. BD (MD) Board .................................................................. 12

3-7. Disc Table .......................................................................... 13

3-8. Sub Chassis ......................................................................... 13

3-9. Optical Pick-up (KSS-213B/K-N) ...................................... 14

3-10. Over Write Head ............................................................... 14

3-11. Slider Complete ASSY...................................................... 15

3-12. Shutter ASSY .................................................................... 16

4. SERVICE MODE ............................................................. 17

5. TEST MODE ..................................................................... 18

6. ELECTRICAL ADJUSTMENTS ............................... 24

7. DIAGRAMS

7-1. Circuit Boards Location ...................................................... 31

7-2. Block Diagrams

• CD Section ....................................................................... 33

• MD Section ...................................................................... 35

• Main Section .................................................................... 37

7-3. Schematic Diagram – CD Section – ................................... 41

7-4. Printed Wiring Board – CD Section – ................................. 43

7-5. Schematic Diagram – MD (1/3) Section –.......................... 45

7-6. Schematic Diagram – MD (2/3) Section –.......................... 47

7-7. Schematic Diagram – MD (3/3) Section –.......................... 49

7-8. Printed Wiring Board – MD Section – ................................ 51

7-9. Schematic Diagram – MD Switch Section – ...................... 53

7-10. Printed Wiring Board – MD Switch Section – ................. 54

7-11. Schematic Diagram – Main (1/3) Section – ..................... 55

7-12. Schematic Diagram – Main (2/3), (3/3) Section – ........... 57

7-13 Printed Wiring Board – Main Section – ........................... 59

7-14. Schematic Diagram – Audio Section –............................. 61

7-15. Printed Wiring Board – Audio Section – .......................... 63

7-16. Schematic Diagram – Panel Section – ............................. 65

7-17. Printed Wiring Board – Panel Section – ........................... 67

7-18. Schematic Diagram – Jack Section – ............................... 69

7-19. Printed Wiring Board – Jack Section – ............................ 71

7-20. Schematic Diagram – ST Terminal/Loading Section – .... 73

7-21. Printed Wiring Board – ST Terminal/Loading Section – . 74

7-22. Schematic Diagram – Trans Section – ............................. 75

7-23. Printed Wiring Board – Trans Section – ........................... 76

7-24. Schematic Diagram – Power AMP Section –................... 77

7-25. Printed Wiring Board – Power AMP Section – ................ 79

7-26. IC Block Diagrams ........................................................... 81

7-27. IC Pin Functions ............................................................... 88

8. EXPLODED VIEWS

8-1. Front Panel Section ............................................................. 96

8-2. Chassis Section ................................................................... 97

8-3. MD Mechanism Deck Section-1 (MDM-3J) ...................... 98

8-4. MD Mechanism Deck Section-2 (MDM-3J) ...................... 99

8-5. CD Mechanism Deck Section-1 (CDM13C-5BD19) ....... 100

8-6. CD Mechanism Deck Section-2 (BU-5BD19) ................. 100

9. ELECTRICAL PARTS LIST ...................................... 102

SAFETY CHECK-OUT

After correcting the original service problem, perform the follow-

ing safety checks before releasing the set to the customer:

Check the antenna terminals, metal trim, “metallized” knobs, screws,

and all other exposed metal parts for AC leakage. Check leakage as

described below.

LEAKAGE

The AC leakage from any exposed metal part to earth Ground and

from all exposed metal parts to any exposed metal part having a

return to chassis, must not exceed 0.5 mA (500 microampers). Leak-

age current can be measured by any one of three methods.

1. A commercial leakage tester, such as the Simpson 229 or RCA

WT-540A. Follow the manufacturers’ instructions to use these

instruments.

2. A battery-operated AC milliammeter. The Data Precision 245

digital multimeter is suitable for this job.

3. Measuring the voltage drop across a resistor by means of a VOM

or battery-operated AC voltmeter. The “limit” indication is 0.75

V, so analog meters must have an accurate low-voltage scale.

The Simpson 250 and Sanwa SH-63Trd are examples of a pas-

sive VOM that is suitable. Nearly all battery operated digital

multimeters that have a 2V AC range are suitable. (See Fig. A)

Fig. A. Using an AC voltmeter to check AC leakage.

0.15

To Exposed Metal

Parts on Set

1.5k

Ω

voltmeter

(0.75V)

Earth Ground

– 7 –

SECTION 1

SERVICING NOTE

NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK

OR BASE UNIT

The laser diode in the optical pick-up block may suffer electrostatic

break-down because of the potential difference generated by the

charged electrostatic load, etc. on clothing and the human body.

During repair, pay attention to electrostatic break-down and also

use the procedure in the printed matter which is included in the

repair parts.

The flexible board is easily damaged and should be handled with

care.

NOTES ON LASER DIODE EMISSION CHECK

The laser beam on this model is concentrated so as to be focused on

the disc reflective surface by the objective lens in the optical pick-

up block. Therefore, when checking the laser diode emission, ob-

serve from more than 30 cm away from the objective lens.

LASER DIODE AND FOCUS SEARCH OPERATION

CHECK

Carry out the “S curve check” in “CD section adjustment” and check

that the S curve waveform is output three times.

Note:

Be sure to connect all wires (including FFC) in the MD

section before applying power or ICs may be damaged.

DISC TABLE GETTING OUT PROCEDURE ON THE

POWER SUPPLY IS OFF

1. Insert the tweezers to a hole on bottom of the chassis as shown a

figure, then tern fully it toward direction 2.

2. Pull out the disc table.

cam

disc table

tweezers

PRECAUTIONS ON REMOVING WINDOW (FL) FROM

FRONT PANEL

• Use the following procedure to prevent scratches on the front panel.

Remove the Knob (VOL).

Remove the nut.

Remove the

ornament (VOL).

Remove the window (FL) using the notch.

– 8 –

Location of Parts and Controls

11/u button

2MD indicator

3MD disc slot

46 (MD) button

5^ (MD) button and indicator

6p (MD) button

7VOLUME knob

8^ (CD) button and indicator

9p (CD) button

10 FUNCTION button

11 MD/CD ) +/TUNING + button

12 MD/CD = 0/TUNING – button

13 TUNER/BAND button

14 6 (CD) button

15 r REC button and indicator

16 CD-MD SYNC button

17 CD disc tray

18 CD indicator

19 REPEAT/STEREO/MONO button

20 PLAY MODE/TUNING MODE button

21 PHONES jack

22 Remote sensor

23 Display window

SECTION 2

GENERAL

Front Panel

15 1213 111617 141920 1821

23 45 61

– 9 –

This section is extracted from

instruction manual.

– 10 –

SECTION 3

DISASSEMBLY

Note: Follow the disassembly procedure in the numerical order given.

3-1. CASE

3-2. FRONT PANEL/MD MECHANISM DECK SECTION

Two screws

(CASE3 TP2)

Two screws

(CASE3 TP2)

Case

Two screws

(

BVTT3x6

)

Wire (flat type)(23core)

(CN873)

Connector

(CN490)

Claw

Front panel

Wire (flat type)(25core)

(CN820)

Six screws (BVTT3x6)

Wire

MD mechanism

– 11 –

3-3. BACK PANEL, JACK BOARD

3-4. MD MECHANISM DECK (MDM-3D)

Connector

(CN590)

Four screws

(BVTP3x10)

Two screws

(BVTP3x10)

Five claws

Wire (flat type)(15core)

(CN401)

JACK board

Connector

(CN402)

Back panel

Two screws

(BVTT2x3)

Two screws

(BVTT2x3)

MD mechanism deck

(MDM-3J)

Bracket (MD)

– 12 –

3-6. BD (MD) BOARD

3-5. CD MECHANISM DECK (CDM13C-5BD19)

Wire (flat type)(19core)

(CN801)

Connector

(CN291)

Two screws

(BVTT3x6)

Two screws

(BVTT3x6)

Bracket (CD)

Two screws

(BVTT3x6)

CD mechanism deck

(CDM13C-5BD19)

Two hooks

Wire (flat type)(25core)

(CN107)

Wire (flat type)(14core)

(CN106)

OP relay flexible board

(CN101)

BD board(MD)

Screw (BVTP2x4)

Flexible board

(over write head)

(CN104)

– 13 –

3-7. DISC TABLE

3-8. SUB CHASSIS

Screw (BV3x8)

Holder (MG) assembly

Pull the disc table

Two step screws

Two insulators

Sub chassis

Part

Two step screws

Two insulators

Take care so that the part

may be right

position when installing.

– 14 –

3-9. OPTICAL PICK-UP (KSS-213B/K-N)

3-10. OVER WRITE HEAD

Move the claw in the

direction of the arrow

Remove the sled shaft in the

direction of the arrow

Wire (flat type)(16 core)

(CNU101)

BD board (CD)

Remove the optical pick-up (KSS-213B/K-N)

in the direction of the arrow

Screw (P1.7x6)

Over write head

– 15 –

3-11. SLIDER COMPLETE ASSY

• Note for installation of Slider complete assembly

Special screw

(M1.7x1.4)

Retainer (gear)

Set the shaft of gear (LB) to be at the

position in the figure.

Remove the slider complete assembly

in the direction of arrow with putting out

of two claws.

45˚

Claw

Slider assembly

Part A

Install the part A of lever (head up)

to pass over the slider complete assembly.

Take care not to damage the

detective switch.

– 16 –

3-12. SHUTTER ASSY

Stopper washer

Shaft (shutter) A

Shutter assembly Shaft (shutter) A

shutter assembly

Shaft (shutter) B

Hole B

Hole A

When installing, install the shaft (shutter) A into the hole as

show in the figure before installing the shaft (shutter) B into

the hole B.

– 17 –

Change-over of AM (MW) Tuner Step between 9 kHz and 10 kHz

• A step of AM (MW) channels can be changed over between 9 kHz and 10 kHz.

Procedure:

1. Press 1/u button to turn the set ON.

2. Select the function “TUNER”, and press TUNER/BAND button to select the BAND “AM (MW)”.

3. Press 1/u button to turn the set OFF.

4. Press FUNCTION and 1/u buttons simultaneously, and the display of fluorescent indicator tube changes to “AM (MW) 9 kHz STEP”

or “AM (MW) 10 kHz STEP”, and thus the channel step is changed over.

Change-over of LW Tuner Step between 1 kHz and 3 kHz

• A step of LW channels can be changed over between 1 kHz and 3 kHz.

Procedure:

1. Press 1/u button to turn the set ON.

2. Select the function “TUNER”, and press TUNER/BAND button to select the BAND “LW”.

3. Press 1/u button to turn the set OFF.

4. Press FUNCTION and 1/u buttons simultaneously, and the display of fluorescent indicator tube changes to “LW 1 kHz STEP” or “LW

3 kHz STEP”, and thus the channel step is changed over.

LED and Fluorescent Indicator Tube All Lit, Key Check Mode

Procedure:

1. Press PLAY MODE and p (MD) buttons simultaneously.

2. LEDs and fluorescent indiator tube are all turned on.

3. When the FUNCTION button is pressed, the fluorescent indicator tube lights up in the order of; partial lighting 1 n partial lighting 2 n

all lit n partial lighting 1 n ······.

When the VOLUME knob is rotated, the LED lighting pattern changes.

To end without switching to the key check mode, press the 1/u button to turn off the power.

4. Press p (CD) button, and the key check mode is activated.

5. In the key check mode, the fluorescent indicator tube displays “KEY=0 JOG=0”. Each time a button is pressed, “KEY=” value increases.

However, once a button is pressed, it is no longer taken into account.

“JOG=” Value increases like 1, 2, 3 ... if rotating VOLUME knob in clockwise direction, or it decreases like 10, 9, 8 ... if rotating in

counterclockwise direction.

6. To exit from this mode, press order all buttons (15 buttons), the displays “KEY=OK”, and press any button, or disconnect the power cord.

SUB CLOCK CHECK

Procedure:

1. Connect an oscilloscope to IC601 pin (¡ and ground of the MAIN board.

2. Press PLAY MODE and p (MD) buttons simultaneously, and the fluorescent indiator tube displays “32.768 kHz (91)”.

3. To check the signal on oscilloscope becomes 32 kHz square wave.

4. Press 1/u button to exit.

SECTION 4

SERVICE MODE

– 18 –

SECTION 5

TEST MODE

5-1. PRECAUTIONS FOR USE OF TEST MODE

Recording Laser Emission Mode and Operating Buttons

• Continuous recording mode (CREC MODE)

• Traverse adjustment mode (EFBAL ADJUST)

• Laser power adjustment mode (LDPWR ADJUST)

• Laser power check mode (LDPWR CHECK)

• Traverse (MO) check (EF MO CHECK)

• Traverse (MO) adjustment (EF MO ADJUST)

5-2. SETTING THE TEST MODE

With the power off, press the ^ (MD) button while pressing the PLAY MODE button.

5-3. EXITING THE TEST MODE

Press the REPEAT button. The STANDBY state will be set and the test mode will be cleared.

5-4. BASIC OPERATIONS OF THE TEST MODE

All operations are performed using the VOLUME knob, p (CD) button, and ^ (CD) button.

The functions of these buttons are as follows.

Function name

VOLUME knob

p (CD) button

^ (CD) button

Function

Changes parameters and modes

Proceeds onto the next step. Finalizes input.

Returns to previous step. Stops operations.

– 19 –

5-5. SELECTING THE TEST MODE

There are altogether 26 test modes, shown in the following table. Rotating the VOLUME knob to the right switches to the mode below the

current mode in the table while rotating to the left switches to the mode above. Each time the ^ (CD) button is pressed, the display changes

in the following order;

“TEMP CHECK” n ”TEMP ADJUST” n ”SLED MOVE” n“TEMP CHECK”…

Display

TEMP CHECK

LDPWR CHECK

EF MO CHECK

EF CD CHECK

FBIAS CHECK

CPLAY MODE

CREC MODE

Scurve CHECK

VERIFY MODE

DETRK CHECK

TEMP ADJUST

LDPWR ADJUST

EF MO ADJUST

EF CD ADJUST

FBIAS ADJUST

EEP MODE

MANUAL CMD

SVDATA READ

ERR DP MODE

SLED MOVE

ACCESS MODE

0920 CHECK

WRITE sure?

HEAD ADJUST

CPLAY2 MODE

CREC2 MODE

Ver @@@@@

Contents

Temperature compensation offset check

Laser power check

Traverse (MO) check

Traverse (CD) check

Focus bias check

Continuous playback mode

Continuous recording mode

S curve check

Non-volatile memory check

Detrack check

Temperature compensation offset adjustment

Laser power adjustment

Traverse (MO) adjustment

Traverse (CD) adjustment

Focus bias adjustment

Nonvolatile memory control

Command transfer

Status display

Error history display, clear

Sled check

Access check

Outermost circumference check

Non-volatile memory Initialize

Head position check

Continuous playback mode

Continuous recording mode

Microprocessor version display

Mark

(X)

(X) (!)

(X)

(X) (!)

(X)

• For details of each adjustment mode, refer to the items in “6. Electrical Adjustments”. For details of “ERR DP MODE”, refer to the self-

diagnosis function on page 2.

• If other modes are set accidentally, press the ^ (CD) button to exit that mode.

• As items marked (X) in the “Mark” column are not used during servicing, they are not described here. If these modes are set accidentally,

press the ^ (CD) button to exit the mode. Be especially careful with items marked (!) as they will overwrite the non-volatile memory,

and as a result, the unit will not operate normally.

5-5-1. Operating the Continuous Playback Mode

1. Entering the continuous playback mode

1Set the disc in the unit. (Recordable discs or discs for playback only.)

2Rotate the VOLUME knob and display “CPLAY MODE”.

3Press the p (CD) button to change the display to “CPLAY MID”.

4When access completes, the display changes to “C = AD = ”.

Note : The numbers “ ” displayed indicate the error rates and “ADER”.

2. Changing the part to be played back

1When the p (CD) button is pressed during continuous playback, the display changes as below, and the played back part can be

changed.

2When access completes, the display changes to “C1 = AD = ”.

Note : The numbers “ ” displayed indicate the error rate and “ADER”.

“CPLAY MID” n “CPLAY OUT” n “CPLAY IN”

– 20 –

Contents

Sets continuous playback when pressed in the STOP state. Turns ON/OFF the tracking servo when pressed during continuous

playback.

Stops the continuous playback and recording.

Moves the sled to the external circumference only while the button is pressed.

Moves the sled to the internal circumference only while the button is pressed.

Switches between pit and groove when pressed.

Switches the displayed contents when pressed.

Ejects the disc.

Exits the test mode.

Function

·P

) +

= 0

CD-MD SYNC

1/u

6 (MD)

REPEAT

“CPLAY MID” n “CPLAY OUT” n “CPLAY IN”

3. Ending the continuous playback mode

1Press the ^ (CD) button. The display changes to “CPLAY MODE”.

2Press the 6 (MD) button to remove the disc.

Note : The playback start addresses for IN, MID, and OUT are as follows. To display the playback position address on the display, press

the 1/u button to display “CPLAY ( )”.

IN: 40h cluster

MID: 300h cluster

OUT: 700h cluster

5-5-2. Operating the Continuous Recording Mode

1. Entering the continuous recording mode

1Set a recordable disc in the unit. (Refer to Note 3.)

2Rotate the VOLUME knob and display “CREC MODE”.

3Press the p (CD) button to change the display to “CREC MID”.

4When access completes, the display changes to “CREC ( )” and the REC display lights up.

Note : The numbers “ ” displayed indicate the recording position address.

2. Changing the part to be recorded

1When the p (CD) button is pressed during continuous recording, the display changes as below and the recorded part can be changed.

The REC display is off while changing.

2When access completes, the display changes to “CREC MODE” and the REC display lights up.

Note : The numbers “ ” displayed indicate the recording position address.

3. Ending the continuous recording mode

1Press the ^ (CD) button. The display changes to “CREC ( )”, and the REC display lights up.

2Press the 6 (MD) button to remove the disc.

Note 1 : The recording start addresses for IN, MID, and OUT are as follows.

IN: 40h cluster

MID: 300h cluster

OUT: 700h cluster

Note 2 : The ^ (CD) button can be used to stop recording anytime.

Note 3 : Do not perform continuous recording for long periods of time above 5 minutes.

Note 4 : During continuous recording, be careful not to apply vibration.

5-5-3. Non-Volatile Memory Mode (EEP MODE)

This mode reads and writes the contents of the non-volatile memory.

It is not used in servicing. If set accidentally, press the ^ (CD) button immediately to exit it.

5-6. FUNCTIONS OF OTHER BUTTONS

– 21 –

5-7. DISPLAYS DURING TEST MODE

The display changes according to the following sequence each time the 1/u button is pressed.

1. Mode display

“TEMP ADJUST” and “CPLAYMODE” are displayed.

2. Error rate display

The error rate is displayed as follows.

C = AD =

C = :Indicates the C1 error.

AD = :Indicates ADER.

3. Address display

The address is displayed as follows. (MO: Recordable disc, CD: Disc for palyback only)

When the CD-MD SYNC button is pressed, the display will switch between groove

and pit.

h = s = (MO pit and CD)

h = a = (MO groove)

h = Indicates the header address.

s = Indicates the SUBQ address.

a = Indicates the ADIP address.

Note: Displayed as “–” when servo is operated.

4. Auto gain display (Not used in servicing)

The auto gain is displayed as follows.

AG = / .

5. Detrack check display (Not used in servicing)

The detrack is displayed as follows.

ADR =

6. IVR display (Not used in servicing)

IVR is displayed as follows.

[ ][ ][

Meanings of other displays

Mode display

Error rate display

Address display

Auto gain display (Not used in servicing)

Detrack check display (Not used in servicing)

IVR display (Not used in servicing)

REC

ATT

OVER

SHUFFLE

TRACK

DISC

LEVEL-SYNC

SYNC

When Off

Contents

Display When Lit

Recording mode ON

ABCD adjustment completed

Tracking offset cancel ON

Focus auto gain OK

Pit

High reflection rate

CLV-S

CLV LOCK

Recording mode OFF

Tracking offset cancel OFF

Groove

Low reflection

CLV-A

CLV UNLOCK

– 22 –

5-8. AGING MODE

This unit is provided with an aging mode.

In this mode, MD and CD operations are performed alternately according to the following sequence.

Aging will be carried out continuously unless an error occurs.

If an error occurs, the status and number of cycles are displayed alternately, and operations stop. (Refer to Table 1.)

Aging Mode Sequence

YES

OK? NO

YES

OK?

OK? NO

YES

Start

Turn ON Power using function MD

MD TOC READ Cannot read Message 6

Can read

MD all erase Above 20 MD last track

Less than 20

Blank disc Message 1

CD function is set and CD TOC is read

CD TOC OK? Message 7

CD synchro standby

Message 2 or 8

CD last track search pause state

Message 9

CD synchro starts

Message 3 or 0

Synchro ends?

MD function is set Playing CD?

CD tray opens

Message !¡

Message !º

CD tray closes

Message !™

MD last track (for 3 sec.) play

Message 4

Power goes off and MD TOC is written

Aging cycle number is displayed

Power turns ON and MD TOC is read

Message 5 or Message 6

– 23 –

Procedure:

1. Load a recordable disc (MD) and CD test disc (YEDS-18). (*Note 1)

2. While pressing the PLAY MODE button, press the ^ (CD) button.

3. Aging is executed in the above sequence.

4. To end, press the p (CD or MD) button.

*Note 1: Any CD can be used, but one with a short last track is recommended. The time of one aging cycle will be longer if the last track is

long.

Also use a CD in which the length of the last track x 20 does not exceed the recording time of the recording MD.

Table 1. Messages and Main Causes When Aging Stops

A disc for playback only was used. The rec-proof tab is set to

protect. Disc error, etc.

Disc is full, etc.

Access error, etc.

No. of total tracks does not match logic value.

Disc error, etc.

Optical defect, spindle defect (including motor), cannot read

Q data, disc defect (scratches, etc.), bad focus, bad GFS, etc.

Disc defect (scratches, etc.), cannot read Q data, etc.

Optical defect, sled, tracking defect (including motor), cannot

read Q data, disc defect (scratches, etc.).

Optical defect, cannot read Q data, disc defect (scratches, etc.),

etc.

LOAD OUT SW defect

LOAD IN SW defect

No Error Messages Details of Error

!¡

!™

MD A Erase NG

MD R-Pause NG

MD D-input NG

MD Play NG

MD TOC NG

MD No Disc NG

CD No Disc NG

CD Pause NG

CD Search NG

CD Play NG

CD Open NG

CD Close NG

Cannot MD all erase.

Cannot set MD Rec Pause.

Cannot lock MD digital in.

Cannot play last track.

MD TOC are different.

Cannot read MD TOC.

Cannot read CD TOC.

Cannot set CD pause in

CD synchro mode.

Cannot search last track on CD.

Cannot play last track on CD.

Cannot open CD tray.

Cannot close CD tray.

Main Causes

– 24 –

MD SECTION

6-1. PRECAUTIONS FOR CHECKING LASER DIODE

EMISSINON

When checking the emission of the laser diode during adjustments,

never view directly from the top as this may cause blindness.

6-2. PRECAUTIONS FOR USE OF OPTICAL PICK-

UP (KMS-260A)

As the laser diode in the optical pick-up is easily damaged by static

electricity, solder the laser tap of the flexible board when using it.

Before disconnecting the connector, solder first. Before connecting

the connector, be careful not to remove the solder. Also take ad-

equate measures to prevent damage by static electricity. Handle the

flexible board with care as it breaks easily.

Optical pick-up flexible board

6-3. PRECAUTIONS FOR ADJUSTMENTS

1) When replacing the following parts, perform adjustments and

checks marked ¬ in the order shown in the following table.

Optical

Pick-up

BD Board

IC101, IC121, IC192

D101

IC171

pick-up flexible board

laser tap

1.Temperature

compensation

offset adjustment

2.Laser power

adjustment

3.Traverse

adjustment

4.Focus bias

adjustment

5.Error rate check

¬¬G¬

¬G¬¬

2) Perform the adjustment in the test mode.

After completing the adjustments, exit the test mode.

3) Perform the adjustments in the order shown.

4) Use the following tools and measuring devices.

• Check disc (MD) TDYS-1

(Parts No. 4-963-646-01)

• Laser power meter LPM-8001 (Parts No. J-2501-046-A)

MD Laser power meter 8010S (Parts No. J-2501-145-A)

• Oscilloscope (Measure after calibration of the probe).

• Digital voltmeter

• Thermometer

5) When observing several signals on the oscilloscope, etc., make

sure that VC and ground do not connect inside the oscilloscope.

(The VC and ground will short-circuit.)

Note : When performing laser power checks and adjustment

(electrical adjustment), use of the new MD laser power meter

8010S (J-2501-145-A) instead of the conventional laser

power meter is convenient.

It sharply reduces the time and trouble to set the laser power

meter sensor onto the objective lens of the pick-up.

6-4. CREATING THE CONTINUOUSLY RECORDED

DISC

• The disc is used for the focus bias adjustment and error rate check.

The following describes how to create a continuously recorded

disc.

1. Insert a disc (blank disc) commercially available.

2. Rotate the VOLUME knob to display “CREC MODE”.

3. Press the p (CD) button to display “CREC MID”.

“CREC (0300)” will be momentarily displayed and recording

started.

4. Complete recording within 5 minutes.

5. Press the ^ (CD) button and stop recording .

6. Press the 6 (MD) button and remove the disc.

Create the continuous recorded disc for adjusting the focus bias

and checking the error rate as described above.

Note :

• Be careful not to apply vibrations during continuous recording.

6-5. TEMPERATURE COMPENSATION OFFSET

ADJUSTMENT

Save the current temperature data in the non-volatile memory as

the 25 °C standard data.

Notes:

1. Normally, this adjustment should not be preformed.

2. Set the surrounding temperature to 22 to 28 °C when performing

this adjustment.

Also perform this adjustment immediately after the power is

turned on when the internal temperature of the unit is the same

as the surrounding temperature (22 to 28 °C).

3. After replacing D101, perform this adjustment after the

temperature of parts reach the surrounding temperature.

Adjusting Procedure:

1. Rotate the VOLUME knob, to display “TEMP ADJUST”.

2. Press the p (CD) button and select the “TEMP ADJUST” mode.

3. “TEMP= ” and the current temperature data are displayed.

4. To save the data: Press the p (CD) button.

If not saving the data: Press the ^ (CD) button.

5. When the p (CD) button is pressed, “TEMP= SAVE” is

displayed, and then “TEMP ADJUST” is displayed again.

“TEMP ADJUST” is displayed again immediately after the ^

(CD) button is pressed.

Specifications:

TEMP= should be E0 to EF. F0 to FF, 00 to 0F, 10 to 1F and 20

to 2F.

SECTION 6

ELECTRICAL ADJUSTMENTS

– 25 –

6-6. LASER POWER ADJUSTMENT

Connection :

KMS260A

27X40

B0825

Iop = 82.5 mA in this case

Iop (mA) = Digital voltmeter reading (mV)/1 (

Ω

)

6-7. TRAVERSE ADJUSTMENT

Connection :

Adjusting Procedure:

1. Connect an oscilloscope to TP (TEO) and TP (VC) of CN110 of

the BD (MD) board.

2. Load a recordable disc (any available on the market). (Refer to

Note 1.)

3. Press the = 0 or ) + button to move the optical

pick-up outside the pit.

4. Rotate the VOLUME knob to display “EFBAL ADJUST”.

5. Press the p (CD) button to display “EFB = MO-R”.

(Laser power READ power/Focus servo ON/tracking servo OFF/

spindle (S) servo ON)

6. Rotate the VOLUME knob so that the oscilloscope waveform

becomes the specified value. (Rotating the VOLUME knob

changes the “EFB= ” value and the waveform.) The waveform

changes by about 2% everytime when adjusted. Adjust as close

as possible to the specified value.

(Read power traverse adjustment)

(Traverse Waveform)

7. Press the p (CD) button and save the adjustment results in the

non-volatile memory (displayed as “EFB = SAVE”

momentarliy and then displayed as “EFB = MO-W”).

8. Rotate the VOLUME knob so that the oscilloscope waveform

becomes the specified value.

(Rotating the VOLUME knob changes the “EFB= ” value

and the waveform.) The waveform changes by about 2%

everytime when adjusted. Adjust as close as possible to the

specified value.

(Write Power Traverse Adjustment)

(Traverse Waveform)

Laser power

meter

Optical pick-up

objective lens

Digital volt mete

TP (I+3V)

TP (IOP)

BD (MD) board

Adjusting Procedure:

1. Set the laser power meter on the objective lens of the optical

pick-up from the disc slot. (If it cannot be set properly, press the

= 0 or ) + button to move the optical pick-up).

Connect the digital voltmeter to TP (I+3V) and TP (IOP) of the

BD (MD) board.

2. Rotate the VOLUME knob to display “LDPWR ADJUST”.

(Laser power: For adjustment)

3. Press the p (CD) button once to display “LD 0.9 mW $ ”.

4. Rotate the VOLUME knob so that the laser power meter reads

0.86 to 0.92 mW. Set the range knob of the laser power meter to

10 mW, press the p (CD) button, and save the adjustment results

in the non-volatile memory. (“LD SAVE $ ” is displayed

momentarily.)

5. “LD 7.0 mW $ ” is next displayed.

6. Rotate the VOLUME knob so that the laser power meter reads

6.9 to 7.1 mW, press the p (CD) button, and save the adjustment

results in the non-volatile memory. (“LD SAVE $ ” is displayed

momentarily.)

Note: Do not emit 7.0 mW continuously for more than 15 seconds.

7. Rotate the VOLUME knob to display “LDPWR CHECK”.

8. Press the p (CD) button once to display “LD 0.9 mW $ ”.

Check that the laser power meter reading is 0.85 to 0.91 mW.

9. Press the p (CD) button another time to diaplay “LD 7.0 mW

$ ”.

Check that the readings of the laser power meter and digital

voltmeter become the specified value.

Specified Value :

Laser power meter reading : 7.0 ± 0.1 mW

Digital voltmeter reading : Value displayed on optical pick-up label

± 10%

(Optical pick-up label)

10. Press the ^ (CD) button to display “LDPWR CHECK” and

stop the laser emission.

(The ^ (CD) button is effective at all times to stop the laser

emission.)

Specified value : A = B

9. Press the p (CD) button to save the adjustment results in the

non-volatile memory (displayed as “EFB = SAVE”

momentarliy).

Oscilloscope

TP (TEO)

TP (VC)

BD (MD) board

– 26 –

10. Next “EFB = MO-P” is displaed, the optical pick-up moves

to the internal circumference of the pit and servo is imposed.

11. Rotate the VOLUME knob so that the oscilloscope waveform

becomes the specified value.

The waveform changes by about 2% everytime when adjusted.

Adjust as close as possible to the specified value.

(Traverse Waveform)

12. Press the p (CD) button and save the adjustment results in the

non-volatile memory (displayed as “EFB = SAVE”

momentarliy).

“EFBAL: CD is next displayed and the disc stops rotating

automatically.

13. Press the 6 (MD) button and remove the disc.

14. Load the check disc (MD) TDYS-1.

15. Press the p (CD) button to display “EFB = CD”. The servo

is imposed automatically.

16. Rotate the VOLUME knob so that the oscilloscope waveform

becomes the specified value.

The waveform changes by about 2% everytime when adjusted.

Adjust as close as possible to the specified value.

(Traverse Waveform)

17. Press the p (CD) button and save the adjustment results in the

non-volatile memory after “EFB = SAVE” is momentarliy

displayed.

“EFBAL ADJUST” is next displayed.

18. Press the 6 (MD) button and remove the check disc (MD)

TDYS-1.

Note 1 : The data will be overwritten on the MO and erased when a

recorded disc is used in this adjustment.

Note 2 : If the traverse waveform is not clear, connect the oscillo-

scope as shown in the following figure so that it can be

seen more clearly.

Specified value : A = B

330 k

Ω

Oscilloscop

10pF

BD (MD) board

TP (TEO)

TP (VC)

6-8. FOCUS BIAS ADJUSTMENT

Adjusting Procedure :

1. Load a continuously recorded disc (Refer to 6-4. Creating the

Continuously Recorded Disc”).

2. Rotate the VOLUME knob to display “CPLAY MODE”.

3. Press the p (CD) button to display “CPLAY MID”.

4. When “C1 = AD = ” is displayed, press the ^ (CD)

button.

5. Rotate the VOLUME knob to display “FBIAS ADJUST”.

6. Press the p (CD) button to display “ / a = ”.

The first four digits indicate the C1 error rate, the two digits

after the “/” indicate ADER and the two digits after “a =” indicate

the focus bias value.

7. Rotate the VOLUME knob in the clockwise direction, and look

for the focus bias value at which the C1 error rate becomes

approximately approx. 200. (Refer to Note 2).

8. Press the p (CD) button to display “ / b = ”.

9. Rotate the VOLUME knob in the counterclockwise direction,

and look for the focus bias value at which the C1 error rate

becomes approx. 200.

Check that the C1 error rate becomes almost equal to the value

set in step 7.

10. Press the p (CD) button to display “ / c = ”.

11. Check that the C1 error rate is below 50 and that ADER is 00.

and press the p (CD) button.

12. If the value of “( )” in the “ - - ( )” displayed is

above 20, press the p (CD) button.

If below, press the ^ (CD) button and start from step 2 again.

13. Press the 6 button and remove the continuously recorded disc.

Note 1 : The following figure shows the relation between the C1

error and focus bias value. Look for points a and b in the

following figure by the adjustment avove. The focus

position (point c) is automatically calculated from points

a and b.

Note 2 : As the C1 error rate changes, use the average value in the

adjustment.

C1 error

approx.

200

bc a Focus bias value

(F. BIAS)

– 27 –

6-9. ERROR RATE CHECK

6-9-1. CD Error Rate Check

Checking Procedure :

1. Load a check disc (MD) TDYS-1.

2. Rotate the VOLUME knob to display “CPLAY MODE”.

3. Press the p (CD) button to display “CPLAY MID”.

4. “C1 = AD = ” is displayed.

5. Check that the C1 error rate is below 20.

6. Press the ^ (CD) button to stop playback. Then press the

6 (MD) button, and remove the check disc (MD).

6-9-2. MO Error Rate Checking

Checking Procedure :

1. Load a continuously recorded disc (Refer to 6-4. Creating the

Continuously Recorded Disc”).

2. Rotate the VOLUME knob to display “CPLAY MODE”.

3. Press the p (CD) button to display “CPLAY MID”.

4. “C1 = AD = ” is displayed.

5. Check that the C1 error rate is below 50 and ADER is 00.

6. Press the ^ (CD) button to stop playback. Then press the

6 (MD) button, and remove the disc.

6-10. FOCUS BIAS CHECK

Change the focus bias value and check the focus tolerance amount.

Checking Procedure :

1. Load a continuously recorded disc (Refer to 6-4. Creating the

Continuously Recorded Disc”).

2. Rotate the VOLUME knob to display “CPLAY MODE”.

3. Press the p (CD) button to display “CPLAY MID”.

4. When “C1 = AD = ” is displayed, press the ^ (CD)

button.

5. Rotate the VOLUME knob to display “FBIAS CHECK”.

6. Press the p (CD) button to display “ / c = ”.

The first four digits indicate the C1 error, the two digits after the

“/” indicate ADER and the two digits after “c =” indicate the

focus bias value.

Check that the C1 error is below 50 and ADER is 00.

7. Press the p (CD) button to change the display to “ / b =

”.

Check that the C1 error does not drop below 220 and ADER

does not remain above 00.

8. Press the p (CD) button to change the display to “ / a =

”.

Check that the C1 error does not drop below 220 and ADER

does not remain above 00.

9. Press the ^ (CD) button, press the 6 (MD) button next, and

remove the continuously recorded disc.

Note 1 : If the C1 error is above 220 or ADER is above 00 only for

point a (step 8 above) and point b (step 7 above), the focus

bias may not adjusted properly. In this case, adjust again.

– 28 –

6-11. ADJUSTING POINTS AND CONNECTING POINTS

[BD (MD) BOARD] (SIDE A)

D101

IC192

IC171

IC101

Q102

IC121

IC316

Q163

TP (IOP)

(VC)

(TEO)

TP (I + 3V)

[BD (MD) BOARD] (SIDE B)

– 29 –

Procedure:

1. Connect oscilloscope to test point TP (RF).

2. Turned Power switch on.

3. Put disc (YEDS-18) in and playback.

4. Adjust RV101 so that the waveform is clear.

(Clear RF signal waveform means that the shape “◊” can be

clearly distinguished at the center of the waveform.)

5. After adjustment, check the RF signal level.

• RF signal

VOLT/DIV: 200 mV

TIME/DIV: 500 nS

S Curve Check

Procedure :

1. Connect oscilloscope to test point TP (FEO).

2. Connect between test point TP (FOK) and Ground by lead wire.

3. Turn Power switch on.

4. Put disc (YEDS-18) in and turned Power switch on again and

actuate the focus search. (actuate the focus search when disc

table is moving in and out.)

5. Check the oscilloscope waveform (S-curve) is symmetrical be-

tween A and B. And confirm peak to peak level within 2.4 ± 0.7

Vp-p.

S-curve waveform

6. After check, remove the lead wire connected in step 2.

Note: • Try to measure several times to make sure than the ratio of

A : B or B : A is more than 10 : 7.

• Take sweep time as long as possible and light up the bright-

ness to obtain best waveform.

RF Level Check

Procedure :

1. Connect oscilloscope to test point TP (RF) on BD board.

2. Turned Power switch on.

3. Put disc (YEDS-18) in and playback.

4. Confirm that oscilloscope waveform is clear and check RF sig-

nal level is correct or not.

Note: Clear RF signal waveform means that the shape “◊” can be

clearly distinguished at the center of the waveform.

RF signal waveform

CD SECTION

Note:

1. CD Block is basically designed to operate without adjustment.

Therefore, check each item in order given.

2. Use YEDS-18 disc (3-702-101-01) unless otherwise indicated.

3. Use an oscilloscope with more than 10MΩ impedance.

4. Clean the object lens by an applicator with lens cleaning liquid

when the signal level is low than specified value with the fol-

lowing checks.

5. Adjust the focus bias adjustment when optical block is replaced.

Focus Bias Adjustment

Perform this adjustment when the optical pick-up has been replaced

or repaired.

–

oscilloscope

BD (CD) board

TP (RF)

TP (VC)

level : 1.3

0.3 Vp-p

–

oscilloscope

BD (CD) board

TP (FEO)

TP (VC)

symmetry

within 2.4

0.7 Vp-p

–

oscilloscope

BD (CD) board

TP (RF)

TP (VC)

level : 1.3

0.3 Vp-p

VOLT/DIV : 200 mV

TIME/DIV : 500 nS

– 30 –

Procedure :

1. Connect oscilloscpe to test point TP (TEO) on BD board.

2. Turn Power switch on.

3. Put disc (YEDS-18) in to play the number five track.

4. Press the “P (Pause)” button. (Becomes the 1 track jump mode)

5. Confirm that the oscilloscope waveform is symmetrical on the

top and bottom in relation to 0Vdc, and check this level.

1 track jump waveform

E-F Balance (1 Track Jump) Check

(Without remote commander)

Specified level: • x 100 = less than ± 7%

• A + B = 300 ± 100 mVp-p

6. Remove the lead wire connected in step 1.

Focus/Tracking Gain Adjustment (RV102, RV103)

This gain has a margin, so even if it is slightly off.

There is no problem.

Therfore, do not perform this adjustment.

Please note that it should be fixed to mechanical center position

when you moved and do not know original position.

A – B

2 (A + B)

Adjustment Location:

[BD (CD) BOARD] — Component Side —

–

oscilloscope

BD (CD) board

TP (TEO)

TP (VC)

LEVEL : 300

100 mVp-p

RV101

(Focus Bias Adjust)

RV103

TEO

FEO

RV102

TEI

FEI

FOK

IC101

IC104

GND

PCK

IC102

HCD-MD333

– 31 –

SECTION 7

DIAGRAMS

7-1. CIRCUIT BOARDS LOCATION

MAIN board

PANEL board

MD LED board

HP board

AUDIO board

POWER AMP board

ENCAPSULATED COMPONENT

(US, Canadian, Malaysia, Singapore,

HongKong, Argentine, Australian, Tourist)

TUNER (FM/MW/LW) (AEP, UK, EE)

TRANS board

ST TERMINAL board

BD (CD) board

LOADING board

BD (MD) board

SW board

JACK board

HCD-MD333

– 33 – – 34 –

7-2. BLOCK DIAGRAMS

– CD SECTION –

SLED MOTOR

DRIVE

•

27 16

MSLO

M102

SLED MOTOR

SPINDLE MOTOR

DRIVE

•

M101

SPINDLE

MOTOR

SLED/SPINDLE

MOTOR DRIVE

IC102 (2/2)

SL+

SLED

SERVO

IC101 (2/2)

TRACKING

COIL DRIVE

T+

T–

FOCUS

COIL DRIVE

F–

F+

2-AXIS

DEVICE

TRACKING

COIL

FOCUS

COIL

TRACKING/FOCUS

COIL DRIVE

IC102 (1/2)

XRST

TRACKING/FOCUS SERVO,

RF AMP

IC101 (1/2)

PD1

PD2

B C

B+

DETECTOR

OPTICAL PICK-UP

(KSS-213B)

FEI

FEO

RV102

FOCUS

GAIN

TEO

TEI

RV103

TRACKING

GAIN

PHD

LD DRIVE

Q101, 102

PD LD

LASER

DIODE

RFO

RFI

C.OUT CNIN

SENS SEIN

FE BIAS 37

RV101

FOCUS

BIAS

+5V

FE-O

FE-M

TA-M

TAO

DATA

XLT

CLK

FGD

FOK

FOCUS SW

Q103

DATAO

XLTO

CLKO

MDP

FOK

XLON

PCMD

LRCK

DATA

LRCK

BCLK BCLK

322

LOUT 16

ROUT 13

• SIGNAL PATH

:digital out (CD)

:CD

AMAIN

SECTION

(Page 37)

DIGITAL FILTER

D/A CONVERTER

IC104

X101

22.5792 MHz

DATA

XLAT

CLOK

SCOR

SQSO

SQCK

SENS

XRST

D OUT

DATA

MLAT

CLOK

CMAIN

SECTION

(Page 37)

D OUT

CLK

DATA

XRST

SCOR

SENS

SQCK

SQSO

DF LATCH

XLAT

FOCUS SW

DRIVE

M904 (CD)

MOTOR

DRIVER

IC801

10 DRIVE

LOAD-OUT

LOAD-IN

OUT-SW

IN-SW

S292

(LOAD IN)

S291

(LOAD OUT)

BMAIN

SECTION

(Page 38)

DIGITAL SIGNAL PROCESSOR

IC103

XTAI

CKO

XTI

•

XTO

5 • 6

SPOD

S101

(LIMIT)

HCD-MD333

– 35 – – 36 –

– MD SECTION –

OVER WRITE

HEAD DRIVE

Q181, 182

HR901

OVER WRITE

HEAD

DETECTOR

ABCD ABCD

34 65

FE FE

ABCD

AMP

FOCUS

ERROR

AMP

TRACKING

ERROR

AMP

32 78

ADFG ADFG

IV AMP

48 47

MORFO

MORFI

RFO

AGCI

OPTICAL PICK-UP BLOCK

(KMS-260A/J1N)

• SIGNAL PATH

: PB (MD)

: REC

: digital out (CD)

PD PD

TEMP

AMP

33 66

AUX AUX1

VCC

TEMPR

TEMPI

D101

36 63

BOTM BOTM

37 62

PEAK PEAK

PEAK &

BOTTOM

RF AGC & EQ 38

RF 55 RFI

BPF P-P

ADIN

ADFM

AMP BPF

16 82

SWDT DTRF

17 81

SCLK CKRF

18 80

XLAT XLRF

SERIAL

↓

PARALLEL

DECODER

CSLED VC

EQADJ

3TADJ

WBLADJ

VICONV

FOCNT FOCNT

20 79

E-F

BALANCE

CVB

3VC

APC

APCREF

LASER ON

Q101

LD ILCC

–

APC

Q162, 163

HF MODULE

IC103, Q102-104

MODULE

MOD

LASER

DIODE

SLED/SPINDLE MOTOR DRIVE

FOCUS/TRACKING COIL DRIVE

IC152

TRK–

TRK+ 12

TRACKING

COIL

TRDR

TFDR

DRIVER

FSC+ 21

FSC– 23

FOCUS

COIL

FFDR

FRDR

DRIVER

SLED+ 27

SLED– 25

SFDR

SRDR

M902

SLED MOTOR

DRIVER

SPDL+ 6

SPDL– 8

SPRD

SPFD

M901

SPINDLE MOTOR

PSB XRST

CLTV

FILO

FILI

PLL

FILTER

PCO

67 VC

ANALOG

MUX

SPRD

ADIP

DEMODULATOR/

DECODER

SPFD

FG IN

SPINDLE

SERVO

SRDR

SFDR

TRDR

TFDR

FRDR

FFDR

APCREF

PWM

GENERATOR

A/D

CONVERTER

XRST

RECP

APC SERVO

DSP

47 • 46 • 48 • 49

D0 –––––––– D3

32–29 • 34–38 • 43

A0 –––––––––– A9 6

•

DQ1

DQ4

41 16

XOE XOE

42 17

XCAS XCAS

44 4

XRAS XRAS

45 3

XWE XWE

DRAM

IC124

CPU

I/F

MONITOR

CONTROL MNT0

MNT1

MNT2

MNT3

SWDT

SCLK

SRDT

SENS

XLAT 7

DQSY 12

SQSY

SUBCODE

PROCESSOR

MNT0

MNT1

MNT2

MNT3

SWDT

SCLK

SRDT

SENS

XLAT

DQSY

SQSY

AUTO

SEQUENCER

CLOCK

GENERATOR OSCI

LRCK

XBCK

FS256

OSCO 17

LRCK

BCK

FS256

X101

22 MHz

DOUT

SAMPLING

RATE

CONVERTER

DIGITAL SERVO SIGNAL PROCESSOR, DIGITAL SIGNAL PROCESSOR

EFM/ACIRC ENCODER/DECODER, SHOCK-PROOF MEMORY CONTROLLER,

ATRAC ENCODER/DECODER, 2M-BIT DRAM

IC121

46 40

RF AMP

XINIT

DADT DADT

ADDT ADDT

DIN DIN

XINT

SCTX

DIGITAL

AUDIO

I/F

BUFFER

IC401

MAIN

SECTION

CHUCK IN

PROTECT

REFLECT

LIMIT

REC P

PB P

PACK OUT

LOAD-OUT

LOAD-IN

XRST

M903 (MD)

LOADING MOTOR

SCL

SDA

MOD

WRPWR

LDON

DETECT SW

S681 - 683,

S685 - 688

SCL

SDA

EEP ROM

IC171

IC181 (2/4)

IC181 (1/4)

IC181 (3/4)

IC181 (4/4)

ATRAC

ENCODER/

DECODER

EFM,

ACIRC,

ENCODER/

DECODER

SHOCK

RESISTANT

MEMORY

CONTROLLER

7 1100 EFMO

RF AMP

IC101

DRIVER

10 15

OVER WRITE HEAD DRIVE

(Page

37)

HCD-MD333

– 37 – – 38 –

– MAIN SECTION –

–B

–

R-CH

D881

D882

J402

TAPE

OUTPUT

R-CH

MNT1

MNT2

MNT3

SWDT

SCLK

SRDT

SENS

XLAT

DQSY

SQSY

XBUSY

SLOCK

XINT

SCTX

MNT1

MNT2

MNT3

SWDT

SCLK

SRDT

SENS

XLAT

DQSY

SQSY

XINT

SCTX

MNT0MNT0

CHUCK-IN

PROTECT

REFLECT

REC.P

PB.P

LIMIT-IN

CHUCK-IN

PROTECT

REFLECT

REC-R

PB-R

LIMIT

PACK-OUTPACK-OUT

WRPWR

LDON

MOD

WRPWR

LDON

MOD

DIG-RST

SCL

SDA

XRST

SCL

SDA

51 LDIN

LOAD-IN

52 LDOUT

LOAD-OUT

53 LD-LOW

DRIVE

LOADING SW

Q350

XOUT

XIN

X302

7 MHz

PWR-DWN

SYSTEM-

RST

MD SYSTEM

CONTROL

IC316

MAS-BUSY

CLK

RXD

AD-EN

DA-EN

EMP

MEC-BUSY

TXD

SECTION

(Page 36)

1 2 3 4

13 12 11 10

LEVEL CONVERT

IC840

12 11 10 8

(OPEN)

OPTICAL SELECTOR

IC842

PDAD

PDDA

DEMO

MCLK

FS256

DIN

LRCK

BCK

DADT

ADDT

LRCK

SCLK

SDTI

SDTO

CD SECTION

(Page 34)

CLOCK

DIVIDER

INTERPOLATOR

∆∑

MOD LPF 26

AOUTL

INTERPOLATOR

∆∑

MOD LPF 27

AOUTR R-CH

DECIMATION

FILTER

∆∑

MOD 5

AINL

DECIMATION

FILTER

∆∑

MOD 3R-CH

SERIAL I/O

INTERFACE

A/D, D/A CONVERTER

IC201

STEREO 82

TUNED 83

DO 84

DI 85

CLK 86

CE 87

MUTE 88

RDS

R-CH

TUNER

UNIT

J401

TAPE

INPUT R-CH GAIN

CONTROL

Q400

GAIN

CONTROL

DRIVER

Q872

R-CH

30 29 25

R-CH

SOUND PROCESSOR

IC701

CD SECTION

REC MUTE

DRIVER

Q871

REC MUTE

Q410

R-CH

DBFB

MUTE

82 83

STEREO

TUNED

84 85

DATA-IN

DATA-OUT

86 87

CLOCK

88 34

ST-MUTE

POWER-ON

–

17 13

POWER AMP

IC1201

–

DBFB

Q701

AMP

IC702

MUTE

Q703

R-CH

MUTE

Q702

POWER SW

Q1202

OVER LOAD DET

Q1201

OVER LOAD DET

Q1251

HEAT SENSOR SW

Q1231, 1232

OVER LOAD DETECT SW

Q434

THP1230

R-CH

POWER SW

Q431

(AEP, UK, EE)

IC1501

BUFFER

RDS DECODER

IC1500

4MUX 13

X1501

4.332 MHz

RDATA RCLK

ATT/6DB

REC OUT.MUTE

D.IN.SELECT

RXD

MECHA BUSY

TXD

MASTER BUSY

MD-CLK

100

AC-CUT

RESET

MD-OEM/REST

DATA

CLOCK

CD-POWER

RDS/DATA

RDS/CLK

2 16

22 46

SCOR (BD)

SUBQ

48 49

SQCLK

CLOCK

50 51

DATA

XLT

52 53 59

SENCE

FOCUS-SW

60 55

BD-REST

IN-SW

56 57

OUT-SW

LOAD-OUT

DF.LAT

LOAD-IN

CD SECTION

(Page 34)

DC DETECT

Q433

RELAY

DRIVE

Q435, 436

RELAY

Q432

R-CH

R-CH L

TM440

SPEAKER

R-CH

FAN DRIVE

Q591, 592

FAN901

R-CH

J1400

PHONES

RY430

ANTENNA

ECN/A

ECN/B

ROTARY

ENCODER

S901

VOLUME

SIRCS

IC902

25 – 27

S902 – 916

SIRCUS

KEY-0

KEY-2

66 – 70 • 72 • 73

LED

LED DRIVE

Q904 – 910

D902 – 908

MASTER CONTROL

IC601

AU BUS

Q420

AU-BUS IN

AU-BUS OUT

CN402

AU BUS

10 11

X601

5 MHz

13 14

X602

32 kHz

XT2

XT1

RESET

Q602

RESET

IC602

+5V

DISPLAY DRIVER

IC901

•

DIG11

DIG2

•

DIG14

DIG12

•

SEG35

SEG27

•

SEG27

SEG0

SCK

RST

SDATA

DIG15

DIG1

FLUORESCENT

INDICATOR

TUBE

FL901

Q901

Q902

M+5V

5+3.3V REG.

SYS+3.3V

4+5V REG.

ANA+5V

6BACK UP

B.UP

+3.3V

• R CH : Same as L CH

• SIGNAL PATH

: FM

: PB

: REC

: CD

: digital out (CD)

: TAPE

• Abbreviation

CND : Canadian model.

EE : East European model.

SP : Singapore model.

MY : Malaysia model.

HK : Hong Kong model.

JE : Tourist model.

AR : Argentine model.

AUS : Australian model.

PDOWN

MD REG.

IC570

POWER

ON/OFF SW

Q571, 572

RESET

IC603

3 5

DRIVER

Q601

+3.3V REG.

IC192

3 1

+3.3V

(BD)

+10V

M+7V

+7.5V REG.

Q510

+7.5V

–7.5V REG.

Q520, 521

–7.5V

D581 D582

+10V REG.

IC510

3 1

+7V REG.

IC511

3 1

T1600

POWER

TRANSFORMAER

RECT

D1300

RECT

D501

D504

(AC IN)

–29V REG.

Q530

–VG

RECT

D551

D554

+5V REG.

IC560

+5V 3 1

1 3

+5V REG.

CD+5V

CP POWER

Q561, 562 VF

VOLTAGE

SELECTOR

S1600

(JE, HK, AR, AUS)

LOADING MOTOR

DRIVE

IC153

FM 75 Ω

FM 300 Ω

(Page 34)

HCD-MD333

– 39 – – 40 –

THIS NOTE IS COMMON FOR PRINTED WIRING

BOARDS AND SCHEMATIC DIAGRAMS.

(In addition to this, the necessary note is printed

in each block.)

For schematic diagrams.

Note:

• All capacitors are in µF unless otherwise noted. pF: µµF

50 WV or less are not indicated except for electrolytics

and tantalums.

• All resistors are in Ω and 1/4 W or less unless otherwise

specified.

•¢: internal component.

•2: nonflammable resistor.

•1: fusible resistor.

•M: Switch with sliding contact indicated by hatched

lines shows shorting type.

•C: panel designation.

For printed wiring boards.

Note:

•X: parts extracted from the component side

•®: Through hole.

•¢: internal component.

•b: Pattern from the side which enables seeing.

(The other layers' patterns are not indicated.)

•U: B+ Line.

•V: B– Line.

•H: adjustment for repair.

Signal path.

F: FM

E: PB (MD)

m: PB (TAPE)

n: REC

J: CD

c: digital out

• Abbreviation

CND : Canadian model.

EE : East European model.

SP : Singapore model.

MY : Malaysia model.

JE : Tourist model.

HK : Hong Kong model.

AR : Argentine model.

AUS : Australian model.

IC103 3 (MDP) (PALY Mode)

WAVEFORMS

– CD SECTION –

IC101 #¡ (RFO) (PLAY Mode)

500 mV/DIV, 500 ns/DIV

IC101 $¢ (TEI) (PLAY Mode)

50 mV/DIV, 1 µs/DIV

IC101 2 (FEI) (PLAY Mode)

50 mV/DIV, 1 µs/DIV

• Indication of transistor

IC101 8, 9 (E, F) (PLAY Mode)

IC101 #• (RF) (PLAY Mode)

!º

IC121 @§ (XBCK)

IC121 @∞ (LRCK)

!¡

!™

IC501 1, 2 (I.J) (PLAY Mode)

IC101 4 (A) (PLAY Mode)

IC152 #™ (CAPA–) (PLAY Mode)

IC152 #™ (CAPA+) (PLAY Mode)

IC121 (º (FS4)

IC121 !¶ (OSCI)

IC121 @¶ (FS256)

IC316 !£ (XOUT)

– MD SECTION –

Caution:

Pattern face side: Parts on the pattern face side seen from the

(Side B) pattern face are indicated.

Parts face side: Parts on the parts face side seen from the

(Side A) parts face are indicated.

These are omitted

Note:

The components identi-

fied by mark ! or dotted

line with mark ! are criti-

cal for safety.

Replace only with part

number specified.

Note:

Les composants identifiés par

une marque ! sont critiques

pour la sécurité.

Ne les remplacer que par une

piéce portant le numéro

spécifié.

IC103 @º (LRCK)

IC103 @• (RFCK)

IC103 @∞ (XPCK)

IC103 @™ (BCLK)

IC104 6 (XTO)

– MAIN SECTION –

IC601 !¡ (XI)

IC601 !¢ (XI)

1.3 ± 0.3 Vp-p

Approx.

100 mVp-p

Approx.

150 mVp-p

2.6 Vp-p

7.6 µs

5.1 Vp-p

136 µs

5.3 Vp-p

14 ns

5 Vp-p

474 ns

5.1 Vp-p

22.8 µs

4.6 Vp-p

16.9344 MHz

Approx.

500 mVp-p

Approx.

200 mVp-p

Approx.

150 mVp-p

4.6 Vp-p

1.5 µsec

4.6 Vp-p

1.5 µsec

3.4 Vp-p

5.7 µsec

3.1 Vp-p

22.5792 MHz

3.4 Vp-p

44.1 kHz

3.5 Vp-p

2.8224 MHz

3.4 Vp-p

11.2896 MHz

3.3 Vp-p

7 MHz

4.3 Vp-p

5 MHz

2.6 Vp-p

32 kHz

1.2 ± 0.2 Vp-p

HCD-MD333

7-3. SCHEMATIC DIAGRAM – CD SECTION –

• See page 39 for Waveforms.

• See page 81 for IC Block Diagrams.

– 41 – – 42 –

(Page 55)

HCD-MD333

– 43 – – 44 –

7-4. PRINTED WIRING BOARD – CD SECTION –

• See page 31 for Circuit Boards Location.

Ref. No. Location

• Semiconductor

Location

IC103 C-1

Q101 B-3

Q103 C-3

Ref. No. Location

• Semiconductor

Location

IC101 B-1

IC102 B-1

IC104 C-3

Q102 B-1

(Page 59)

HCD-MD333

– 45 – – 46 –

7-5. SCHEMATIC DIAGRAM – MD (1/3) SECTION –

• See page 40 for Waveforms.

• See page 51 for Printed Wiring Board.

(Page 47) (Page 47) (Page 48) (Page 48)

• See page 84 for IC Block Diagrams.

• See page 88 for IC Pin Functions.

HCD-MD333

– 47 – – 48 –

7-6. SCHEMATIC DIAGRAM – MD (2/3) SECTION –

• See page 40 for Waveforms.

• See page 51 for Printed Wiring Board.

• See page 85 for IC Block Diagrams.

• See page 89 for IC Pin Functions.

(Page 45) (Page 45) (Page 46) (Page 46)

(Page 49) (Page 49) (Page 50)

(Page 55)

HCD-MD333

– 49 – – 50 –

7-7. SCHEMATIC DIAGRAM – MD (3/3) SECTION –

• See page 40 for Waveforms.

• See page 83 for IC Block Diagrams.

• See page 92 for IC Pin Functions.

(Page 53)

(Page 47) (Page 47) (Page 48)

HCD-MD333

– 51 – – 52 –

Ref. No. Location

• Semiconductor Location

D181 B-1

D183 B-1

IC101 B-3

IC103 B-4

IC121 C-4

IC124 D-4

IC152 A-4

IC153 A-1

IC171 A-3

IC181 B-1

IC201 D-3

7-8. PRINTED WIRING BOARD – MD SECTION –

• See page 31 for Circuit Boards Location.

IC316 A-2

Q101 B-3

Q102 B-4

Q103 B-4

Q104 B-4

Q162 B-4

Q163 A-3

Q181 B-1

Q182 B-1

Q350 A-1

Ref. No. Location

• Semiconductor

Location

Ref. No. Location

D101 A-2

IC192 C-4

IC401 D-4

(Page 54)

(Page 59)

HCD-MD333

– 53 – – 54 –

7-10. PRINTED WIRING BOARD – MD SWITCH SECTION –

• See page 31 for Circuit Boards Location.

7-9. SCHEMATIC DIAGRAM – MD SWITCH SECTION –

(Page 50)

(Page 51)

HCD-MD333

– 55 – – 56 –

(Page 73) (Page 61) (Page 62)

(Page 57)

(Page 66)

(Page 73)

(Page 47)

(Page

42)

(Page 69)

• See page 86 for IC Block Diagrams.

• See page 94 for IC Pin Functions.

7-11. SCHEMATIC DIAGRAM – MAIN (1/3) SECTION –

• See page 40 for Waveforms.

• See page 59 for Printed Wiring Board.

HCD-MD333

– 57 – – 58 –

(Page 56)

(Page 77)

(Page 75)

7-12. SCHEMATIC DIAGRAM – MAIN (2/3), (3/3) SECTION –

• See page 86 for IC Block Diagrams.

HCD-MD333

– 59 – – 60 –

7-13. PRINTED WIRING BOARD – MAIN SECTION –

• See page 31 for Circuit Boards Location.

Ref. No. Location

• Semiconductor Location

D501 A-9

D502 A-9

D503 A-9

D504 A-9

D511 D-9

D521 C-7

D531 E-7

D532 E-7

D533 D-7

D534 D-7

D551 C-9

D552 C-9

D553 C-9

D554 C-9

D561 E-9

D562 E-7

D563 E-5

D571 D-9

D572 C-10

D581 B-10

D582 B-10

D591 A-8

D601 D-4

D602 D-4

D603 E-5

D604 E-5

D605 C-5

D801 A-3

D802 B-2

D803 D-4

D881 B-5

D882 A-7

IC510 C-10

IC511 C-10

IC560 E-10

IC601 D-2

IC602 D-4

Ref. No. Location

IC603 E-3

IC801 E-4

IC840 C-4

IC842 A-1

Q510 C-8

Q520 C-7

Q521 C-7

Q530 E-6

Q561 E-8

Q562 E-8

Q571 D-9

Q572 D-9

Q591 A-7

Q592 A-8

Q601 E-3

Q602 D-4

Q871 D-4

Q872 D-4

Ref. No. Location

(Page 44) (Page 63) (Page 52) (Page 64) (Page 72) (Page 79) (Page 76)

(Page 67)

(Page 74) (Page 74)

HCD-MD333

– 61 – – 62 –

(Page 69)

(Page 55, 56) (Page 56)

7-14. SCHEMATIC DIAGRAM – AUDIO SECTION –

• See page 87 for IC Block Diagrams.

HCD-MD333

– 63 – – 64 –

7-15. PRINTED WIRING BOARD – AUDIO SECTION –

• See page 31 for Circuit Boards Location.

• Semiconductor

Location

Ref. No. Location

D701 C-3

D1501 B-4

IC701 B-2

IC702 B-3

IC1500 A-4

IC1501 B-5

Q701 A-3

Q702 C-4

Q703 C-3

Q751 B-3

Q752 C-3

(Page 72)

(Page 59) (Page 59)

HCD-MD333

– 65 – – 66 –

7-16. SCHEMATIC DIAGRAM – PANEL SECTION –

(Page 55)

(Page 70)

HCD-MD333

– 67 – – 68 –

7-17. PRINTED WIRING BOARD – PANEL SECTION –

• See page 31 for Circuit Boards Location.

• Semiconductor

Location

Ref. No. Location

D901 C-3

D902 A-2

D903 A-2

D904 E-3

D906 D-2

D907 D-2

D908 E-6

IC901 C-6

IC902 C-8

Q901 C-5

Q902 C-5

Q904 A-3

Q905 B-2

Q906 E-4

Q907 B-3

Q908 D-2

Q909 D-2

Q910 E-4

(Page 59)

(Page 71)

HCD-MD333

– 69 – – 70 –

7-18. SCHEMATIC DIAGRAM – JACK SECTION –

(Page 61)

(Page 65)

(Page 55) (Page 78)

HCD-MD333

– 71 – – 72 –

7-19. PRINTED WIRING BOARD – JACK SECTION –

• See page 31 for Circuit Boards Location.

• Semiconductor

Location

Ref. No. Location

D422 A-4

D430 B-1

D447 A-1

D497 A-1

IC470 A-8

Q400 B-5

Q410 A-6

Q420 A-4

Q431 A-3

Q432 A-3

Q433 A-3

Q434 A-3

Q435 A-3

Q436 A-3

Q450 B-6

Q460 A-7

(Page 67) (Page 79) (Page 63) (Page 59)

HCD-MD333

– 73 – – 74 –

7-20. SCHEMATIC DIAGRAM – ST TERMINAL/LOADING SECTION – 7-21. PRINTED WIRING BOARD – ST TERMINAL/LOADING SECTION –

• See page 31 for Circuit Boards Location.

(11)

CN291

S291

(LOAD OUT)

M904

(LOADING

MOTOR)

LOADING BOARD

S292

(LOAD IN)

1-634-461-

(Page 59)

(Page 55)

HCD-MD333

– 75 – – 76 –

7-22. SCHEMATIC DIAGRAM – TRANS SECTION – 7-23. PRINTED WIRING BOARD – TRANS SECTION –

• See page 31 for Circuit Boards Location.

(Page 60) (Page 79)

(Page 78)

(Page 58)

HCD-MD333

– 77 – – 78 –

7-24. SCHEMATIC DIAGRAM – POWER AMP SECTION –

(Page 57)

(Page 70)

(Page 75)

HCD-MD333

– 79 – – 80 –

7-25. PRINTED WIRING BOARD – POWER AMP SECTION –

• See page 31 for Circuit Boards Location.

• Semiconductor

Location

Ref. No. Location

D1201 C-2

D1202 B-1

D1203 B-2

D1213 C-2

D1251 D-2

D1263 E-2

D1300 B-3

IC1201 C-1

Q1201 C-2

Q1202 B-2

Q1231 B-1

Q1232 B-1

Q1251 E-2

(Page 71)

(Page 60)

(Page 76)

HCD-MD333

7-26. IC BLOCK DIAGRAMS

• CD section

IC101 CXA1782BQ

– 81 – – 82 –

PHD2

PHD1

PHD

RF M

RF O

RF I

CC1

CC2

FOK

24 SENS

23 C. OUT

22 XRST

21 DATA

20 XLT

19 CLK

18 VCC

17 ISET

16 SL 0

15 SL M

14 SL P

TA O

TA M

FSET

TG2

TGU

SRCH

FE M

FE O

FLB

FGD

FDFCT

FEI

FEO

48VC

47TDFCT

46TZC

45ATSC

44TEI

43LPFI

42TEO

41VEE

40EI

39E

38F

37FE BIAS

–

APC

–

LEVELS

FOK

MIRR

DFCT

RF IV AMP2

RF IV AMP1

FE AMP

F IV AMP

E IV AMP

TE AMP

FZC COMP

BAL1

BAL2

BAL3

TOG1

TOG2

TOG3

TTL

IIL

TTL

IIL

• IIL DATA RESISTOR • INPUT SHIFT RESISTOR

• ADDRESS DECODER

• OUTPUT DECODER

HPF COMP LPF COMP

TZC COMP

DFCT

TM1

FS4

ATSC

• WINDOW COMP

• FCS PHASE

COMPENSATION

• TRACKING

• PHASE

COMPENSATION

• ISET

FS1

FS2

TM4

TM5

TM6

TM3

TM7

TG2

• F SET

TG1

TM2

–

TOG1-3 FS1-4 TG1-2 TM1-7 PS1-4

BAL1-3

35 34

IC102 BA6397FP

DRIVE

BUFFER

DRIVE

BUFFER

LEVEL

SHIFT

LEVEL

SHIFT

THERMAL

SHUT DOWN

REGULATOR

DRIVER MUTE

LEVEL

SHIFT

DRIVE

BUFFER

DRIVE

BUFFER

DRIVE

BUFFER

DRIVE

BUFFER

LEVEL

SHIFT

DRIVE

BUFFER DRIVE

BUFFER

OUT1A

OUT1B

IN1A

IN1B

TR-B

REG 0

XRST

GND

IN2A

IN2B

OUT2A

OUT2B

GND

OP-OUT

GND

OUT4

OUT4B

IN4A

IN4B

VCC

VCC VCC

VCC

IN3B

IN3A

OUT3B

OUT3

OP+

OP–

IC103 CXD2507AQ

32313029282726252423222120

52535455565758596061626364

FOK

MON

MDP

MDS

LOCK

TEST

FILO

FILI

PCO

VSS

AVSS

CLTV

AVDD

BIAS

ASYI

ASYO

ASYE

WDCK

DATA

XRST

SENS

MUTE

SQCK

SQSO

EXCK

SBSO

SCOR

VSS

WFCK

EMPH

DOUT

C4M

FSTT

XTSL

XTAO

XTAI

MNTO

SERVO AUTO

SEQUENCER

CPU

INTERFACE DIGITAL

CLV

SUB CODE

PROCESSOR

EFM

DEMODULATOR

DIGITAL

PLL

ASYMMETRY

CORRECTOR D/A

INTERFACE

ERROR

CORRECTOR

16K

RAM

DIGITAL

OUT

CLOCK

GENERATOR

LRCK

PCMD

BCLK

GTOP

XUGF

XPCK

VDD

GFS

RFCK

CZPO

XROF

MNT3

MNT1

XLON

SPOD

SPOC

SPOB

SPOA

CLKO

VDD

XLTO

DATO

CNIN

SEIN

CLOK

XLAT

– 83 –

– MD Section –

IC104 PCM1710U-B

IC153 LB1830-S-TE-L IC201 AK4520A-VF-E2

INPUT

INTERFACE DIGITAL

FILTER

NOISE

SHAPER

5-LEVEL DAC

RIGHT

LOW-PASS FILTER

RIGHT

3-STAGE AMP

RIGHT

LOW-PASS FILTER

LEFT

3-STAGE AMP

LEFT

5-LEVEL DAC

LEFT

MODE

CONTROL

TIMING

CONTROL

LRCIN

DIN

BCKIN

CLKO

XTI

XTO

DGND

VDD

VCC2R

GND2R

EXT1R

EXT2R

VOUTR

GND1

ML/DSD

MC/DM2

MD/DM1

MUTE

MODE

CKSL

DGND

VDD

VCC2L

VCC1

GND2L

EXT1L

EXT2L

VOUTL

LOGIC

PREDRIVER

VREF

2 3 45

10 9 8 7 6

IN2 IN1 VM VREF VCONT

VCC OUT2 GND OUT1 VS

∆Σ

MODULATOR

8×

INTERPOLATOR

COMMON

VOLTAGE

CLOCK

DIVIDER

SERIAL I/O

INTERFACE

LPF ∆Σ

MODULATOR

∆Σ

MODULATOR

∆Σ

MODULATOR

8×

INTERPOLATOR

DECIMATION

FILTER

DECIMATION

FILTER

LPF

16 15171819202122232425262728

12 3 45 6 7 8 9 10 14131211

VCOM

AOUTR

AOUTL

CMODE

PWAD

PWDA

DGND

TST1

TST2

TST3

DEM1

DEM0

MCLK

SDTO

SDTI

SCLK

LRCK

DIF1

DIF0

AGND

AINL–

AINL+

AINR–

VREFH

AINR+

VREFL

– 84 –

IC101 CXA2523AR

–1

–2

–

IVR BB

–

IVR AA

–

IVR CC

–

IVR DD

–

IVR +

–

EE EE'

EFB TESW

PTGR

MORFO

MORFI

RFO

OPN

OPO

ADDC

COMPP

COMPO

AGCI

RF AGC

PEAK

36 BOTM

35 ABCD

34 FE

33 AUX

32 ADFG

31 ADAGC

30 ADIN

29 ADFM

28 SE

27 CSLED

26 TE

25 WBLADJ

VCC

3TADJ

EQADJ

VREF

F0CNT

XSTBY

XLAT

SCLK

SWDT

TEMPR

TEMPI

GND

12APCREF

11APC

10PD

3VC

VI CONV

BGR

VREF

SCRI - PARA

DECODE

–

AUXSW

COMMAND

–

IVR

GSW IV

–

FBAL

FF'

SEA

–

–1

–2

TEA

WBL

–

DET

ADIP

AGC

WBL

BPF22

BPFC

ABCDA

FEA

WBL

ATA

–

CVB

–

RFA1

–

GRVA

CFST

RFA2

GRV

HLPT

PTGR

–2

–1

–2

BOTTOM

PEAK

RF AGC EQ

DET

P-P

WBL

3T WBL TEMP

PBH

–

USROP

–USRC

BPF3T

PEAK3T

– 85 –

IC121 CXD2652AR

100

99 98 97 96 95 94 93

EFMO

DVSS

TEST3

TEST2

TEST1

TEST0

SPFD

SPRD

SFDR

SRDR

FS4

KRDR

FFDR

DVDD

TFDR

TRDR

LDDR

APCREF

DTRF

CKRF

XLRF

F0CNT

ADFG

APC

DCHG

75 AUX2

74 TE

73 SE

72 AVSS

71 ADRB

70 ADRT

69 AVDD

68 ADIO

61 CLTV

60 FILO

59 FILI

58 PCO

57 PDO

55 RFI

56 AVSS

54 BIAS

53 AVDD

52 ASYI

51 ASYO

67 VC

66 AUX1

65 FE

64 ABCD

63 BOTM

62 PEAK

MVCI

XWE

XRAS

A09

XCAS

XOE

DVSS

A11

A08

A07

A06

A05

A04

A10

A00

A01

A02

A03

DVDD

XBCK

FS256

LRCK

DADT

ADDT

DOUT

DIN

RVSS

RVDD

XTSL

OSCO

OSCI

XINT

RECP

DQSY

SQSY

XRST

SENS

SRDT

XLAT

SCLK

SWDT

MNT3

MNT2

MNT1

MNT0

PWM

GENERATOR

AUTO

SEQUENCER

SERVO

DSP

CPU I/F

MONITOR

CONTROL

SPINDLE

SERVO

EACH

BLOCK

EACH

BLOCK

DIGITAL

AUDIO

I/F

SAMPLING

RATE

CONVERTER

CLOCK

GENERATOR

SUBCODE

PROCESSOR

EACH

BLOCK

A/D

CONVERTER

ANALOG

MUX

EFM/ACIRC

ENCODER/

DECODER

APC

PLL

SHOCK RESISTANT

MEMORY CONTROLLER

ATRAC

ENCODER/DECODER

DRAM

ADIP

DEMODULATOR/

DECODER

COMP

ADDRESS/DATA BUS A00 - A11, D0 - D3

IC152 BH6511FS-E2

32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

GND

IN4R

IN4F

VM4

OUT4F

PGND4

OUT4R

VM34

OUT3R

PGND3

OUT3F

VM3

IN3F

IN3R

PSB

CAPA–

CAPA+

IN2R

IN2F

VM2

OUT2F

PGND2

OUT2R

VM12

OUT1R

PGND1

OUT1F

VM1

IN1F

IN1R

VDD

CHARGE

PUMP.

OSC

INTERFACE AMP

AMP INTERFACE

PREDRIVEPREDRIVE

AMP

INTERFACE

AMPAMPAMP

VDD

PSB

AMP

– 86 –

– MAIN Section –

IC570 LA5620 IC603 M62016L

12 3 45

–

INTERRUPT SIGNAL

GENERATING BLOCK

RESET SIGNAL

GENERATING BLOCK

–

GND INT RESET CD VCC

COM

IC801 LB1641

12 3 45 6 7 8 9 10

GND

MOTOR

DRIVE

NOISE

FILTER

CLAMP

FWD.IN

REV.IN

VCC 1

VCC 2

NOISE

FILTER

MOTOR

DRIVE

MOTOR

DRIVE

MOTOR

DRIVE

T.S.D O.C.P

FWD/REV/STOP

CONTROL LOGIC

1–

VREF

DELAY

CIRCUIT

3.3V

PH5

STBY

VCC

ANA5

SYS3.3

BACK

CD1

P. DOWN

GND

CD2

S. RESET

–

11 DELAY

CIRCUIT

– 87 –

IC1500 BU1922F

– AUDIO Section –

QUALITY BIT

GENERATOR

DEFFERENTIAL

DECODER

BIPHASE

SYMBOL

DECODER

OSCILLATOR

AND

DIVIDER

57kHz

BANDPASS

(8th ORDER)

CONTAS LOOP

VARIABLE AND

FIXED DIVIDER

REFERENCE

VOLTAGE

ANTI-

ALIASING

FILTER

CLOCKED

COMPARATOR

TEST LOGIC AND OUTPUT

SELECTOR SWITCH

RECONSTRUCTION

FILTER

141516 13 12 11 10 9

321 4 5 6 7 8

CLOCK REGENERATION

AND SYNC

VP1

RDCL

TS7

OSCO

OSCI

VDDD

VSSD

TEST

TSTL

QUAL

RDDA

Vref

MUX

VDDA

VSSA

CIN

SCOUT

– 88 –

7-27. IC PIN FUNCTIONS

• IC101 CXA2523AR (RF Amplifier) (BD (MD) Board)

Pin No.

1 I I I-V converted RF signal I input from the optical pick-up block detector

2 J I I-V converted RF signal J input from the optical pick-up block detector

3 VC O Middle point voltage (+1.65V) generation output terminal

4 to 9 A to F I Signal input from the optical pick-up detector

10 PD I Light amount monitor input terminal

11 APC O Laser amplifier output terminal to the automatic power control circuit

12 APCREF I Reference voltage input terminal for setting laser power

13 GND — Ground terminal

14 TEMPI I Connected to the temperature sensor

15 TEMPR O Output terminal for a temperature sensor reference voltage

16 SWDT I Writing serial data input from the CXD2652AR (IC121)

17 SCLK I Serial clock signal input from the CXD2652AR (IC121)

18 XLAT I Serial latch signal input from the CXD2652AR (IC121)

19 XSTBY I Standby signal input terminal “L”: standby (fixed at “H” in this set)

20 F0CNT I

21 VREF O Reference voltage output terminal Not used (open)

22 EQADJ I Center frequency setting terminal for the internal circuit (EQ)

23 3TADJ I Center frequency setting terminal for the internal circuit (BPF3T)

24 VCC — Power supply terminal (+3.3V)

25 WBLADJ I Center frequency setting terminal for the internal circuit (BPF22)

26 TE O Tracking error signal output to the CXD2652AR (IC121)

27 CSLED I Connected to the external capacitor for low-pass filter of the sled error signal

28 SE O Sled error signal output to the CXD2652AR (IC121)

29 ADFM O FM signal output of the ADIP

30 ADIN I Receives a ADIP FM signal in AC coupling

31 ADAGC I Connected to the external capacitor for ADIP AGC

32 ADFG O ADIP duplex signal (22.05 kHz ± 1 kHz) output to the CXD2652AR (IC121)

33 AUX O Auxiliary signal (I3 signal/temperature signal) output to the CXD2652AR (IC121)

34 FE O Focus error signal output to the CXD2652AR (IC121)

35 ABCD O Light amount signal (ABCD) output to the CXD2652AR (IC121)

36 BOTM O Light amount signal (RF/ABCD) bottom hold output to the CXD2652AR (IC121)

37 PEAK O Light amount signal (RF/ABCD) peak hold output to the CXD2652AR (IC121)

38 RF O Playback EFM RF signal output to the CXD2652AR (IC121)

39 RFAGC I Connected to the external capacitor for RF auto gain control circuit

40 AGCI I Receives a RF signal in AC coupling

41 COMPO O User comparator output terminal Not used (open)

42 COMPP I User comparator input terminal Not used (fixed at “L”)

43 ADDC I Connected to the external capacitor for cutting the low band of the ADIP amplifier

44 OPO O User operational amplifier output terminal Not used (open)

45 OPN I User operational amplifier inversion input terminal Not used (fixed at “L”)

46 RFO O RF signal output terminal

47 MORFI I Receives a MO RF signal in AC coupling

48 MORFO O MO RF signal output terminal

Pin Name I/O Function

Center frequency control voltage input terminal of internal circuit (BPF22, BPF3T, EQ)

input from the CXD2652AR (IC121)

– 89 –

• IC121 Digital Signa; Processor, Digitak Servo Signal Processor, EFM/ACIRC Encoder/Decoder, Shock-proof Memory

Controller, ATRAC Encoder/Decoder, 2M Bit DRAM (CXD2652R) (BD (MD) Board)

1 MNT0 (FOK) O

2 MNT1 (SHCK) O Track jump detection signal output to the MD system controller (IC316)

3 MNT2 (XBUSY) O Monitor 2 signal output to the MD system controller (IC316)

4 MNT3 (SLOC) O Monitor 3 signal output to the MD system controller (IC316)

5 SWDT I Writing data signal input from the MD system controller (IC316)

6 SCLK I Serial clock signal input from the MD system controller (IC316)

7 XLAT I Serial latch signal input from the MD system controller (IC316)

8 SRDT O (3) Reading data signal output to the MD system controller (IC316)

9 SENS O (3) Internal status (SENSE) output to the MD system controller (IC316)

10 XRST I Reset signal input from the MD system controller (IC316) “L”: reset

11 SQSY O

12 DQSY O

13 RECP I

14 XINT O Interrupt status output to the MD system controller (IC316)

15 TX I

16 OSCI I System clock signal (512Fs=22.5792 MHz) input terminal

17 OSCO O System clock signal (512Fs=22.5792 MHz) output terminal

18 XTSL I

19 RVDD — Power supply terminal (+3.3V) (digital system)

20 RVSS — Ground terminal (digital system)

21 DIN I Digital audio signal input terminal when recording mode (for optical in)

22 DOUT O Digital audio signal output terminal when playback mode (for optical out) Not used

23 ADDT I Recording data input from the A/D, D/A converter (IC201)

24 DADT O Playback data output to the A/D, D/A converter (IC201)

25 LRCK O L/R sampling clock signal (44.1 kHz) output to the A/D, D/A converter (IC201)

26 XBCK O Bit clock signal (2.8224 MHz) output to the A/D, D/A converter (IC201)

27 FS256 O Clock signal (11.2896 MHz) output to the A/D, D/A converter (IC201)

28 DVDD — Power supply terminal (+3.3V) (digital system)

29 A03 O

30 A02 O

31 A01 O

32 A00 O

33 A10 O

34 A04 O Address signal output to the external D-RAM (IC124)

35 A05 O

36 A06 O

37 A07 O

38 A08 O

39 A11 O

* I (A) for analog input, O (3) for 3-state output, and O (A) for analog output in the column I/O.

Pin No. Pin Name I/O Function

Focus OK signal output to the MD system controller (IC316)

“H” is output when focus is on

Subcode Q sync (SCOR) output to the MD system controller (IC316)

“L” is output every 13.3 msec Almost all, “H” is output

Digital In U-bit CD format subcode Q sync (SCOR) output to the MD system controller

(IC316) “L” is output every 13.3 msec Almost all, “H” is output

Laser power selection signal input from the MD system controller (IC316)

“H”: recording mode, “L”: playback mode

Recording data output enable signal input from the MD system controller (IC316)

Writing data transmission timing input (Also serves as the magnetic head on/off output)

Input terminal for the system clock frequency setting “L”: 45.1584 MHz, “H”: 22.5792

MHz (fixed at “H” in this set)

– 90 –

40 DVSS — Ground terminal (digital system)

41 XOE O Output enable signal output to the external D-RAM (IC124)

42 XCAS O Column address strobe signal output to the external D-RAM (IC124)

43 A09 O Address signal output to the external D-RAM (IC124)

44 XRAS O Row address strobe signal output to the external D-RAM (IC124)

45 XWE O Write enable signal output to the external D-RAM (IC124)

46 D1 I/O

47 D0 I/O Two-way data bus for the external D-RAM (IC124)

48 D2 I/O

49 D3 I/O

50 MVCI I Digital in PLL oscillation input from the external VCO Not used (fixed at “L”)

51 ASYO O Playback EFM full-swing output

52 ASYI I (A) Playback EFM asymmetry comparator voltage input

53 AVDD — Power supply terminal (+3.3V) (analog system)

54 BIAS I (A) Playback EFM asymmetry circuit constant current input

55 RFI I (A) Playback EFM RF signal input from the CXA2523AR (IC101)

56 AVSS — Ground terminal (analog system)

57 PDO O (3)

58 PCO O (3) Phase comparison output for master clock of the recording/playback EFM master PLL

59 FILI I (A) Filter input for master clock of the recording/playback master PLL

60 FILO O (A) Filter output for master clock of the recording/playback master PLL

61 CLTV I (A) Internal VCO control voltage input of the recording/playback master PLL

62 PEAK I (A) Light amount signal (RF/ABCD) peak hold input from the CXA2523AR (IC101)

63 BOTM I (A) Light amount signal (RF/ABCD) bottom hold input from the CXA2523AR (IC101)

64 ABCD I (A) Light amount signal (ABCD) input from the CXA2523AR (IC101)

65 FE I (A) Focus error signal input from the CXA2523AR (IC101)

66 AUX1 I (A) Auxiliary signal (I3 signal/temperature signal) input from the CXA2523AR (IC101)

67 VC I (A) Middle point voltage (+1.65V) input from the CXA2523AR (IC101)

68 ADIO O (A) Monitor output of the A/D converter input signal Not used (open)

69 AVDD — Power supply terminal (+3.3V) (analog system)

70 ADRT I (A) A/D converter operational range upper limit voltage input terminal (fixed at “H” in this set)

71 ADRB I (A) A/D converter operational range lower limit voltage input terminal (fixed at “L” in this set)

72 AVSS — Ground terminal (analog system)

73 SE I (A) Sled error signal input from the CXA2523AR (IC101)

74 TE I (A) Tracking error signal input from the CXA2523AR (IC101)

75 AUX2 I (A) Auxiliary signal input terminal Not used (fixed at “H”)

76 DCHG I (A) Connected to the +3.3V power supply

77 APC I (A) Error signal input for the laser automatic power control Not used (fixed at “L”)

78 ADFG I ADIP duplex FM signal (22.05 kHz ± 1 kHz) input from the CXA2523AR (IC101)

79 F0CNT O Filter f0 control signal output to the CXA2523AR (IC101)

80 XLRF O Serial latch signal output to the CXA2523AR (IC101)

81 CKRF O Serial clock signal output to the CXA2523AR (IC101)

82 DTRF O Writing data output to the CXA2523AR (IC101)

* I (A) for analog input, O (3) for 3-state output, and O (A) for analog output in the column I/O.

Pin No. Pin Name I/O Function

Phase comparison output for clock playback analog PLL of the playback EFM

Not used (open)

– 91 –

83 APCREF O

84 LDDR O PWM signal output for the laser automatic power control Not used (open)

85 TRDR O Tracking servo drive PWM signal (–) output to the BH6511FS (IC152)

86 TFDR O Tracking servo drive PWM signal (+) output to the BH6511FS (IC152)

87 DVDD — Power supply terminal (+3.3V) (digital system)

88 FFDR O Focus servo drive PWM signal (+) output to the BH6511FS (IC152)

89 FRDR O Focus servo drive PWM signal (–) output to the BH6511FS (IC152)

90 FS4 O Clock signal (176.4 kHz) output terminal (X’tal system) Not used (open)

91 SRDR O Sled servo drive PWM signal (–) output to the BH6511FS (IC152)

92 SFDR O Sled servo drive PWM signal (+) output to the BH6511FS (IC152)

93 SPRD O Spindle servo drive PWM signal (–) output to the BH6511FS (IC152)

94 SPFD O Spindle servo drive PWM signal (+) output to the BH6511FS (IC152)

95 FGIN I

96 TEST1 I Input terminal for the test (fixed at “L”)

97 TEST2 I

98 TEST3 I

99 DVSS — Ground terminal (digital system)

100 EFMO O EFM signal output terminal when recording mode

Pin No. Pin Name I/O Function

Control signal output to the reference voltage generator circuit for the laser automatic

power control

– 92 –

• IC316 M30610MCA-272FP (MD SYSTEM CONTROL) (BD (MD) BOARD)

1,2 (JOG0, JOG1) I Encoder switch signal input terminal Not used (fixed at “H”)

3,4 DAOUT1, DAOUT2 O Not used (fixed at “L”)

5 SQSY I Subcode Q sync (SCOR) input from the CXD2652AR (IC121)

6 REMCON I Remote control signal input

7 EMP O De-emphasis control signal output to the AK4520 (IC201)

8 BYTE I External data bus line byte select signal input terminal “L”:16bit “H”: 8bit (fixed at “L”)

9 CNVSS I Processor mode select signal input terminal (fixed at “L”)

10 XIN-T I Sub system clock input tarminal Not used (fixed at “L”)

11 (XOUT-T) O Sub sytem clock output tarminal Not used (fixed at “L”)

12 SYSTEM-RST I MD reset signal input from the M62016 (IC603)

13 XOUT O Main system clock signal output terminal

14 GND — Ground terminal

15 XIN I Main sytem clock signal input terminal

16 +3V — Power supply terminal (+3.3V)

17 NMI — Connecting to power supply

18 AMUTE — Not used (fixed at "L")

19 PWR-DWN O Power down detect signal output to the LA5620 (IC570)

20 DQSY I Digital in U-bit CD format subcode Q sync (SCOR) input from theCXD2652SAR (IC121)

21 STB I Stand-by signal input terminal Not used (fixed at “L”)

22 DA-RST I D/A converter reset signal input terminal Not used (fixed at “L”)

23 XINT I Interrupt status input from the CXD2652AR (IC121)

24 DA-EN O D/A converter enable signal output to the AK4520 (IC201)

25 AD-EN O A/D converter enable signal output to the AK4520 (IC201)

26 MEC-BUSY O Mecha-busy signal output to the master control (IC601)

27 FLCS O Display clear signal output terminal Not used (fixed at “L”)

28 FLCLK O Display data clock signal output terminal Not used (fixed at “L”)

29 — — Not used (fixed at “L”)

30 FLDATA O Display data signal output terminal Not used (fixed at “L”)

31 TXD O MD control data signal output to the master control (IC601)

32 RXD I MD control data signal input to the master control (IC601)

33 CLK I MD control data clock signal input to the master control (IC601)

34 MAS-BUSY I Master-busy signal input from the master control (IC601)

35 SWDT O Writing data signal output to the CXD2652AR (IC121)

36 SRDT I Reading data signal input from the CXD2652AR (IC121)

37 SCLK O Serial clock signal output to the CXD2652AR (IC121)

38 XLAT O Serial latch signal output to the CXD2652AR (IC121)

39 — O Clock signal output terminal Not used (fixed at “L”)

40 DIG-RST O Reset signal output enable signal output to the CXD2652AR (IC121)

41 SENS I Status (SENSE) input from the CXD2652AR (IC121)

42 SCTX O Recording data output enable signal output to the CXD2652AR (IC121)

43 XINT O Not used (fixed at “L”)

44 WRPWR O Laser power selection signal output to the CXD2652AR (IC121)

45 MNT3 I Monitor 3 signal input from the CXD2652AR (IC121)

46 MNT2 I Monitor 2 signal input from the CXD2652AR (IC121)

47 MNT1 I Track jump detection signal input from the CXD2652AR (IC121)

48 MNTO I Focus OK signal input from the CXD2652AR (IC121)

49 LDON O Laser diode ON signal output terminal

50 MOD O HF module ON signal output terminal

Pin No. Pin Name I/O Function

– 93 –

51 LDIN O MD loading-in signal output to LB1830M (IC153)

52 LDOUT O MD loading-out signal output to LAB1830M (IC153)

53 LD-LOW O Loading motor voltage control signal output to the loading motor driver

54 PROTECT I MD PROTECT switch (S683) detect signal input terminal

55 REFLECT I MD REFLECT switch (S682) detect signal input terminal

56 PACK-IN I Not used

57 PACK-OUT I MD PACK OUT switch (S686) detect signal input terminal

58 CHUCK-IN I MD CHUCKING IN switch (S685) detect signal input terminal

59 LIMIT-IN I MD LIMIT IN switch (S681) detect signal input terminal

60 REC. P I MD REC POSITION switch (S688) detect signal input terminal

61 PB. P I MD PB POSITION switch (S687) detect signal input terminal

62 +5V — Power supply (+5V)

63 — — Not used (fixed at “L”)

64 GND — Ground terminal

65 to 72 — — Connect terminal 65 to 72 Not used (fixed at “L”)

73 to 78 — — Not used (fixed at “L”)

79 SDA I/O Tow-way data bus for the EEPROM (IC171)

80 SCL O Clock signal output to the EEPROM (IC171)

81, 82 — — Not used (fixed at “L”)

83 POWER —

84, 85 — —

86, 87 — — Not used (fixed at “L”)

88 to 90 — — Connect terminal 88 to 90 Not used (fixed at “L”)

91 to 93 KEY0, KEY1, KEY2 — Connect terminal 91 to 93 Not used (fixed at “H”)

94 — — Not used (fixed at “L”)

95 SOURCE — Not used (fixed at “L”)

96 AVSS — Ground terminal

97 — — Not used (fixed at “L”)

98 VREF5V — Power supply (+5V)

99 3.3V — Power supply (+3.3V)

100 — — Not used (fixed at “L”)

Pin No. Pin Name I/O Function

Conenct terminal 83 to 85 Not used (fixed at “L”)

– 94 –

• IC601 µPD78078GF-062-3BA (MASTER CONTROL) (MAIN BOARD (1/3))

RTS (TO MD. CTS)

MASTER BUSY

RXD (TO MD. TXD)

RXD

TXD (TO MD. RXD)

TXD

CTS (TO MD. RTS)

MECHA BUSY

1 to 3 VER I Destination setting terminal

4 VER I Destination setting terminal Not used (open)

5 to 7 (NC) — Not used

8 — — Not used (open)

9 IC — Connecting to ground

10 X2 O Main system clock output terminal (5 MHz)

11 X1 I Main system clock input terminal (5 MHz)

12 VDD — Power supply terminal (+5V)

13 XT2 O Sub system clock output terminal (32 kHz)

14 XT1 I Sub system clock input terminal (32 kHz)

15 RESET I System reset signal input from the reset signal generator (IC602)

16 AU-BUS IN I AU-BUS signal input terminal

17 AU-BUS OUT O AU-BUS signal output terminal

18 ENC/A I Encorder volume signal A input from the master volume (S901)

19 ENC/B I Encoder volume signal B input from the master volume (S901)

20 RDS/CLK I RDS clock signal input from the RDS demodulator (IC1500)

21 RDS/DATA I RDS data signal input from the RDS demodulator (IC1500)

22 SCOR (BD) I Sub-code sync S0, S1 detect signal input from the digital signal processor (IC103)

23 AVDD — Power supply terminal (+5V) (for A/D converter)

24 AVREF0 — Reference voltage input terminal (+5V) (for A/D converter)

25 KEY0 I Key input terminal (A/D input) POWER key (S902) input

26 KEY 1 I

27 KEY 2 I

28 to 30 — — Not used

31 O Master-busy signal output to the MD system control (IC316)

32 MD-POWER O MD power on/off signal output to the MD power regulator (IC570)

33 AVSS — Ground terminal (for A/D converter)

34 POWER ON I System power on signal input terminal

35 MD OEM/REST O MD reset signal output terminal

36 AVREF1 I Reference voltage input terminal (+5V) (for A/D converter)

37 I MD control data signal input from the MD system control (IC316)

38 O MD control data signal output to the MD system control (IC316)

39 MD-CLK O MD control data clock signal output to the MD system control (IC316)

40 VSS — Ground terminal

41 I Mecha-busy signal input from the MD system control (IC316)

42 FL/DRIV DATA O Display data signal output to the fluorescent indicator drive (IC901)

43 FL/DRIV CLOCK O Display data clock signal output to the fluorescent indicator drive (IC901)

44 FL/DRIV CS O Display clear signal output to the fluorescent indicator drive (IC901) “L”: data output

45 FL/DRIVE RESET O Display reset signal output to the fluorescent indicator drive (IC901) “L”: reset

46 BD SUBQ I Sub-code Q data signal input from the CXD2507AQ (IC103)

47 (NC) — Not used (open)

Pin No. Pin Name I/O Function

Key input terminal (A/D input) p (CD), ^ (CD), § (CD), p (MD), ^ (MD),

§ (MD) keys (S903 to S908) input

Key input terminal (A/D input) FUNCTION, ) + +, TUNER/BAND, = 0 –,

r REC, CD-MD SYNC, REPEAT STEREO/MONO, PLAY MODE TUNING MODE

(S909 to S916) input

– 95 –

48 BD SQCLK O Sub-code Q data reading clock signal output to the CXD2507AQ (IC103)

49 BD CLOCK O Serial data clock signal output to the CXD2507AQ (IC103)

50 BD DATA O Serial data output to the CXD2507AQ (IC103)

51 XLT O Serial data latch pulse signal output to the CXD2507AQ (IC103)

52 PRGL (DF. LAT) O Serial data latch pulse signal output to the PCM1710U (IC104)

53 SENCE I Internal status (SENSE) signal input from the CXD2507AQ (IC103)

54 ADJ I Test mode input terminal “H’: normal (fixed at “H” in this set)

55 IN-SW I Disc tray close complete signal input terminal “L”: Completed

56 OUT-SW I Disc tray open complete signal input terminal “L” Completed

57 LOAD-OUT O Disc tray loading out signal output to the motor driver (IC801)

58 LOAD-IN O Disc tray loading in signal output to the motor driver (IC801)

59 FOCUS-SW O Focus gain selection switch signal output terminal “L”: normal “H”: down

60 BD-REST O BD block reset signal output terminal “L”: reset

61 CD-POWER O CD power on/off signal output to the CD power regulator (Q561, 562)

62 ST-POWER O ST power on/off signal output terminal Not used (open)

63 D. IN. SELECT O Optical/CD select signal output terminal “H”: optical “L”: CD

64, 65 — — Not used

66 LED-CD. DISC O CD INDICATOR LED (D908) drive signal output terminal

67 LED-MD. DISC O MD INDICATOR LED (D905) drive signal output terminal

68 LED-MD. REC O r LED (D904) drive signal output terminal

69 LED-CD. PAUSE O P (CD) LED (D907) drive signal output terminal

70 LED-CD. PLAY O ( (CD) LED (D906) drive signal output terminal

71 VSS — Ground terminal

72 LED-MD. PAUSE O P (MD) LED (D903) drive signal output terminal

73 LED-MD. PLAY O ( (MD) LED (D902) drive signal output terminal

74 DBFB O DBFB on/off signal output terminal “L”: on

75 RECOUT. MUTE O Rec mute (tape) signal output terminal “L”: mute

76 MUTE O Mute signal output terminal

77 ATT/6DB O Tape input level attenuate signal output terminal

78 SOUND/IC DATA O Graphic equalizer data signal output to the M62428FP (IC701)

79 SOUND/IC CLOCK O Graphic equalizer data clock signal output to the M62428FP (IC701)

80 SOUND/IC LAT O Graphic equalizer data latch pulse signal output to the M62428FP (IC701)

81 (GND) — Ground terminal

82 ST STEREO I Stereo detection signal input from the tuner

83 ST TUNED I Tuned detection signal input from the tuner

84 ST DATA-IN I Data signal input from the tuner

85 ST DATA-OUT O Data signal output to the tuner

86 ST CLOCK O Data transfer clock signal output to the tuner

87 ST CE O Chip enable signal output to the tuner

88 ST MUTE O Mute signal output to the tuner

89 FM/AM SELECT O FM/AM select signal output Not used (open)

90 SIRCUS I Remote control signal input from the remote control receiver (IC902)

91 — — Not used (open)

92 — — Connecting to ground

93 FAN SPEED O Fan speed control signal output terminal Not used (open)

94 FAN STOP O Fan on/off signal output terminal Not used (open)

95 to 99 — — Connecting to ground

100 BACKUP I System reset signal input from the reset signal generator (IC602)

Pin No. Pin Name I/O Function

– 96 –

SECTION 8

EXPLODED VIEWS

8-1. FRONT PANEL SECTION

NOTE:

• Items marked “*” are not stocked since they are

seldom required for routine service. Some delay

should be anticipated when ordering these items.

• The mechanical parts with no reference number in

the exploded views are not supplied.

• Hardware (# mark) list and accessories and packing

materials are given in the last of this parts list.

• Abbreviation

CND : Canadian model

EE : East European model

HK : Hong Kong model

SP : Singapore model

MY : Malaysia model

AR : Argentine model

AUS : Australian model

JE : Tourist model

The components identified by

mark ! or dotted line with mark

! are critical for safety.

Replace only with part number

specified.

Les composants identifiés par une

marque ! sont critiques pour la

sécurité.

Ne les remplacer que par une

piéce portant le numéro spécifié.

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

10 1-782-793-11 WIRE (FLAT TYPE) (23 CORE)

11 4-210-902-01 PANEL, LOADING

12 3-363-099-11 SCREW (CASE 3 TP2)

*13 4-993-866-21 HOLDER (FL)

14 4-212-098-01 FILTER

15 4-210-890-11 WINDOW (FL)(AEP,UK,EE)

15 4-210-890-21 WINDOW (FL)(EXCEPT AEP,UK,EE)

FL901 1-517-687-11 INDICATOR TUBE, FLUORESCENT

1 4-210-901-01 KNOB (VOL)

2 4-210-903-01 ORNAMENT (VOL)

*3 4-993-842-01 CASE

4 X-4950-225-1 PANEL ASSY, FRONT

*5 1-671-020-21 HP BOARD

*6 4-930-336-71 FOOT (FELT)

*7 1-670-745-21 MD LED BOARD

8 4-951-620-01 SCREW (2.6X8), +BVTP

*9 A-4417-317-A PANEL BOARD, COMPLETE

not

supplied

FL901

not

supplied

supplied with S901 #4

– 97 –

8-2. CHASSIS SECTION

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

Les composants identifiés par une

marque ! sont critiques pour la

sécurité.

Ne les remplacer que par une

piéce portant le numéro spécifié.

The components identified by

mark ! or dotted line with mark

! are critical for safety.

Replace only with part number

specified.

*63 4-984-204-11 PLATE (ST-B), SHIELD

64 1-783-213-11 WIRE (FLAT TYPE) (15 CORE)

*65 A-4417-124-A MAIN BOARD, COMPLETE (AEP,UK,EE)

*65 A-4417-128-A MAIN BOARD, COMPLETE (MY,SP,JE,HK,AR,AUS)

*65 A-4417-132-A MAIN BOARD, COMPLETE (US,CND)

*66 4-924-098-91 HOLDER, PC BOARD

*67 A-4414-818-A AUDIO BOARD, COMPLETE (AEP,UK,EE)

*67 A-4414-821-A AUDIO BOARD, COMPLETE

(MY,SP,JE,HK,AR,AUS)

*67 A-4414-824-A AUDIO BOARD, COMPLETE (US,CND)

!68 1-569-008-21 ADAPTOR, CONVERSION 2P (MY,SP,JE)

!69 1-770-019-11 ADAPTOR, CONVERSION PLUG 3P (UK,HK)

*70 4-988-533-01 HOLDER, PWB

!CNP1601 1-696-847-11 CORD, POWER (AUS)

!CNP1601 1-769-744-11 CORD, POWER (EXCEPT US,CND,AR,AUS)

!CNP1601 1-783-532-11 CORD, POWER (US,CND)

!CNP1601 1-783-941-11 CORD, POWER (AR)

FAN901 1-698-997-11 FAN, D.C.

!T1600 1-431-498-11 TRANSFORMER, POWER (MY,SP,JE,HK,AR,AUS)

!T1600 1-431-988-11 TRANSFORMER, POWER (AEP,UK,EE)

!T1600 1-431-989-11 TRANSFORMER, POWER (US,CND)

51 4-993-867-01 FOOT (8)

52 1-782-990-11 WIRE (FLAT TYPE) (19 CORE)

53 3-703-244-00 BUSHING (2104), CORD

*54 1-666-904-11 TRANS BOARD

*55 A-4417-126-A POWER AMP BOARD, COMPLETE (AEP,UK,EE)

*55 A-4417-130-A POWER AMP BOARD, COMPLETE

(MY,SP,JE,HK,AR,AUS)

*55 A-4417-134-A POWER AMP BOARD, COMPLETE (US,CND)

56 1-782-991-11 WIRE (FLAT TYPE) (15 CORE)

*57 A-4414-823-A JACK BOARD, COMPLETE (MY,SP,JE,HK,AR,AUS)

*57 A-4414-826-A JACK BOARD, COMPLETE (US,CND)

*57 A-4414-830-A JACK BOARD, COMPLETE (AEP,UK,EE)

58 4-985-672-01 SCREW (+PTPWHM2.6), FLOATING

*59 4-993-849-52 PANEL, BACK (AEP,UK,EE)

*59 4-993-849-61 PANEL, BACK (MY,SP,JE,HK,AR,AUS)

*59 4-993-849-71 PANEL, BACK (US,CND)

*60 1-666-905-11 ST TERMINAL BOARD

*61 4-984-203-21 PLATE (ST-A), SHIELD

62 1-233-544-21 ENCAPSULATED COMPONENT (US,CND)

62 1-233-546-21 ENCAPSULATED COMPONENT

(MY,SP,JE,HK,AR,AUS)

62 1-693-387-21 TUNER (FM/MW/LW)(AEP,UK,EE)

MDM-3J

not

supplied

not

supplied

not supplied

CDM13C-5BD19 #4

CNP1601

T1600

EXCEPT US,CND,ARARAUS

MY, SP, JE UK,HK

US,CND

FAN901

not

supplied not

supplied

not supplied

58 59

(including

CNP1601CNP1601

– 98 –

8-3. MD MECHANISM DECK SECTION-1 (MDM-3J)

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

*101 A-4699-808-A BD (MD) BOARD, COMPLETE

102 1-660-966-11 OP RELAY FLEXIBLE BOARD

103 1-782-683-11 WIRE (FLAT TYPE) (14 CORE)

104 X-4949-900-1 SHUTTER ASSY

105 4-997-456-02 SHAFT (SHUTTER)(A)

106 4-986-959-01 WASHER, STOPPER

107 4-987-327-01 INSULATOR

108 4-628-167-01 SCREW, STEP

109 4-997-962-01 SPRING (O/C), TENSION

110 1-783-113-11 WIRE (FLAT TYPE) (25 CORE)

not supplied

108

106

105

104

102

107 107

108

101

110

109

103

– 99 –

8-4. MD MECHANISM DECK SECTION-2 (MDM-3J)

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

151 A-4672-138-A SLIDER COMPLETE ASSY

*152 4-983-439-01 BRACKET (DAMPER)

153 3-953-235-01 DAMPER, OIL

154 4-979-901-21 LEVER (LIMITTER)

155 3-342-375-11 SCREW (M1.7X1.4), SPECIAL

156 4-979-890-11 RET AINER (GEAR)

157 4-979-898-01 GEAR (LB)

158 4-979-899-01 GEAR (LC)

159 4-979-897-01 GEAR (LA)

160 4-979-885-01 LEVER (HEAD UP)

161 4-979-906-11 SPRING (LEAD SCREW)

162 4-984-556-01 SHAFT (MAIN SHAFT)

*163 1-667-719-11 SW BOARD

164 A-3304-200-A SCREW ASSY , LEAD

165 4-963-914-02 RACK (INSER TER)

166 3-366-890-11 SCREW (M1.4)

!167 8-583-028-02 OPTICAL PICK-UP KMS-260A/J1N (for MD)

168 4-987-061-01 SPACER (RACK)

169 4-988-560-01 SCREW (+P 1.7X6)

170 4-955-841-11 SCREW

171 4-979-914-01 SPRING (CLV), TORSION

*172 4-983-511-02 PIN (OUTSER T)

*173 4-983-437-01 SLIDER (CAM)

HR901 1-500-396-11 HEAD, OVER LIGHT (RF325-74A)

M901 A-4672-135-A MOTOR ASSY , SPINDLE

M902 A-4672-133-A MOTOR ASSY , SLED

M903 A-4672-134-A MOTOR ASSY , LOADING (MD)

Les composants identifiés par une

marque ! sont critiques pour la

sécurité.

Ne les remplacer que par une

piéce portant le numéro spécifié.

The components identified by

mark ! or dotted line with mark

! are critical for safety.

Replace only with part number

specified.

151

153

152

154

173

161

155

163

155 165

168

167 170

166

164

162

160

171

159

155

156

158

157

169

HR901

M901

M903

#13

172

M902

not supplied

Ver 1.1 2001.06

– 100 –

8-5. CD MECHANISM DECK SECTION-1 (CDM13C-5BD19)

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

*201 1-634-461-11 LOADING BOARD

202 4-927-654-01 WASHER (LIMITER)

203 3-659-338-00 SPRING, COMPRESSION

204 4-929-764-01 SHAFT (TABLE GUIDE)

205 4-927-620-01 GEAR (P)

206 4-944-006-11 BEARING

207 4-927-628-01 GEAR (C)

208 4-927-649-01 BELT

209 4-929-724-01 PULLEY (B)

210 X-4947-265-1 ARM ASSY, SWING

211 4-944-012-01 TABLE, DISC

212 A-4604-752-A HOLDER (MG) ASSY

*213 4-917-583-21 BRACKET, YOKE

*214 X-4946-208-1 CHASSIS (MD) ASSY

215 4-933-134-01 SCREW (+PTPWH M2.6X6)

216 4-958-593-01 SPRING (BU), COMPRESSION

217 4-929-747-01 HOLDER (BU)

218 4-929-727-01 CAM (A)

219 4-929-729-01 CAM (B)

M904 A-4608-362-A MOTOR (L) ASSY (LOADING) (CD)

#11

#10

M904

not supplied

BU-5BD19

211

204

219

218

202

216

215

214

213

210

206

205

207

212

208

209

216

217

203

201

– 101 –

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

8-6. CD MECHANISM DECK SECTION-2 (BU-5BD19)

251 4-951-620-01 SCREW (2.6X8), +BVTP

*252 A-4673-402-A BD (CD) BOARD, COMPLETE

253 4-917-565-01 SHAFT, SLED

254 4-951-940-01 INSULATOR (BU)

!255 8-848-379-31 OPTICAL PICK-UP KSS-213B/K-N (for CD)

256 1-769-069-11 WIRE (FLAT TYPE) (16 CORE)

257 4-917-567-01 GEAR (M)

258 4-917-564-01 GEAR (P), FLATNESS

M101 X-4917-523-4 BASE (OUTSART) ASSY (SPINDLE)

M102 X-4917-504-1 MOTOR ASSY (SLED)

Les composants identifiés par une

marque ! sont critiques pour la

sécurité.

Ne les remplacer que par une

piéce portant le numéro spécifié.

The components identified by

mark ! or dotted line with mark

! are critical for safety.

Replace only with part number

specified.

255

256

257

254

M102

258

251

252

254

M101

(including

253

#12

– 102 –

• SEMICONDUCTORS

In each case, u: µ , for example:

uA...: µ A..., uPA...: µ PA..., uPB...: µ PB...,

uPC...: µ PC..., uPD...: µ PD...

• CAPACITORS

uF : µ F

• COILS

uH : µ H

• Abbreviation

CND : Canadian model

EE : East European model

MY : Malaysia model

SP : Singapore model

JE : Tourist model

HK : Hong Kong model

AR : Argentine model

AUS : Australian model

• Due to standardization, replacements in the parts list

may be different from the parts specified in the

diagrams or the components used on the set.

• -XX, -X mean standardized parts, so they may have

some difference from the original one.

• Items marked “*” are not stocked since they are

seldom required for routine service. Some delay

should be anticipated when ordering these items.

• RESISTORS

All resistors are in ohms

METAL: Metal-film resistor

METAL OXIDE: Metal Oxide-film resistor

F : nonflammable

SECTION 9

ELECTRICAL PARTS LIST

Note:

When indicating parts by reference

number, please include the board

name.

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

AUDIO

The components identified by

mark ! or dotted line with mark

! are critical for safety.

Replace only with part number

specified.

Les composants identifiés par une

marque ! sont critiques pour la

sécurité.

Ne les remplacer que par une

piéce portant le numéro spécifié.

*A-4414-818-A AUDIO BOARD, COMPLETE (AEP,UK,EE)

*********************

*A-4414-821-A AUDIO BOARD, COMPLETE

*********************

(MY,SP,JE,HK,AR,AUS)

*A-4414-824-A AUDIO BOARD, COMPLETE (US,CND)

*********************

< CAPACITOR >

C701 1-126-163-11 ELECT 4.7uF 20% 50V

C702 1-126-163-11 ELECT 4.7uF 20% 50V

C703 1-126-163-11 ELECT 4.7uF 20% 50V

C704 1-126-163-11 ELECT 4.7uF 20% 50V

C705 1-126-163-11 ELECT 4.7uF 20% 50V

C706 1-136-165-00 FILM 0.1uF 5% 50V

C707 1-124-464-11 ELECT 0.22uF 20% 50V

C708 1-130-473-00 MYLAR 0.0015uF 5% 50V

C709 1-126-160-11 ELECT 1uF 20% 50V

C712 1-162-294-31 CERAMIC 0.001uF 10% 50V

C713 1-124-589-11 ELECT 47uF 20% 16V

C714 1-136-165-00 FILM 0.1uF 5% 50V

C715 1-136-165-00 FILM 0.1uF 5% 50V

C716 1-124-261-00 ELECT 10uF 20% 50V

C717 1-126-163-11 ELECT 4.7uF 20% 50V

C718 1-162-290-31 CERAMIC 470PF 10% 50V

C719 1-124-589-11 ELECT 47uF 20% 16V

C720 1-124-589-11 ELECT 47uF 20% 16V

C731 1-130-475-00 MYLAR 0.0022uF 5% 50V

C743 1-124-589-11 ELECT 47uF 20% 16V

C751 1-126-163-11 ELECT 4.7uF 20% 50V

C752 1-126-163-11 ELECT 4.7uF 20% 50V

C753 1-126-163-11 ELECT 4.7uF 20% 50V

C754 1-126-163-11 ELECT 4.7uF 20% 50V

C755 1-126-163-11 ELECT 4.7uF 20% 50V

C756 1-136-165-00 FILM 0.1uF 5% 50V

C757 1-124-464-11 ELECT 0.22uF 20% 50V

C758 1-130-473-00 MYLAR 0.0015uF 5% 50V

C759 1-126-160-11 ELECT 1uF 20% 50V

C762 1-124-261-00 ELECT 10uF 20% 50V

C763 1-130-477-00 MYLAR 0.0033uF 5% 50V

C764 1-136-165-00 FILM 0.1uF 5% 50V

C765 1-136-165-00 FILM 0.1uF 5% 50V

C766 1-124-261-00 ELECT 10uF 20% 50V

C767 1-126-163-11 ELECT 4.7uF 20% 50V

C768 1-162-290-31 CERAMIC 470PF 10% 50V

C769 1-162-294-31 CERAMIC 0.001uF 10% 50V

C781 1-130-475-00 MYLAR 0.0022uF 5% 50V

C1501 1-124-589-11 ELECT 47uF 20% 16V

(AEP,UK,EE)

C1502 1-164-159-11 CERAMIC 0.1uF 50V

(AEP,UK,EE)

C1503 1-126-157-11 ELECT 10uF 20% 16V

(AEP,UK,EE)

C1504 1-162-291-31 CERAMIC 560PF 10% 50V

(AEP,UK,EE)

C1505 1-126-157-11 ELECT 10uF 20% 16V

(AEP,UK,EE)

C1506 1-124-257-00 ELECT 2.2uF 20% 50V

(AEP,UK,EE)

C1507 1-102-518-11 CERAMIC 33PF 5% 50V

(AEP,UK,EE)

C1508 1-162-288-31 CERAMIC 330PF 10% 50V

(AEP,UK,EE)

C1509 1-102-518-11 CERAMIC 33PF 5% 50V

(AEP,UK,EE)

C1510 1-162-306-11 CERAMIC 0.01uF 20% 16V

(AEP,UK,EE)

C1511 1-162-291-31 CERAMIC 560PF 10% 50V

(AEP,UK,EE)

C1512 1-162-306-11 CERAMIC 0.01uF 20% 16V

(AEP,UK,EE)

C1513 1-162-301-11 CERAMIC 0.0015uF 20% 16V

(AEP,UK,EE)

C1515 1-162-600-11 CERAMIC 0.0047uF 20% 16V

(AEP,UK,EE)

< CONNECTOR >

CN701 1-779-819-11 CONNECTOR, BOARD TO BOARD 14P

CN702 1-779-819-11 CONNECTOR, BOARD TO BOARD 14P

< DIODE >

D701 8-719-911-19 DIODE 1SS119-25

D1501 8-719-911-19 DIODE 1SS119-25 (AEP,UK,EE)

< IC >

IC701 8-759-439-30 IC M62428FP

IC702 8-759-634-51 IC M5218AP

IC1500 8-759-450-87 IC BU1922F (AEP,UK,EE)

IC1501 8-759-636-55 IC M5218AFP (AEP,UK,EE)

– 103 –

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

BD (CD)

< TRANSISTOR >

Q701 8-729-620-05 TRANSISTOR 2SC2603-EF

Q702 8-729-141-30 TRANSISTOR 2SC3623A-LK

Q703 8-729-422-57 TRANSISTOR UN4111

Q751 8-729-620-05 TRANSISTOR 2SC2603-EF

Q752 8-729-141-30 TRANSISTOR 2SC3623A-LK

< RESISTOR >

R702 1-249-433-11 CARBON 22K 5% 1/4W

R703 1-247-903-00 CARBON 1M 5% 1/4W

R704 1-249-429-11 CARBON 10K 5% 1/4W

R705 1-247-843-11 CARBON 3.3K 5% 1/4W

R706 1-247-885-00 CARBON 180K 5% 1/4W

R707 1-249-425-11 CARBON 4.7K 5% 1/4W F

R708 1-249-421-11 CARBON 2.2K 5% 1/4W F

R709 1-247-895-00 CARBON 470K 5% 1/4W

R710 1-249-435-11 CARBON 33K 5% 1/4W

R712 1-249-421-11 CARBON 2.2K 5% 1/4W F

R713 1-249-441-11 CARBON 100K 5% 1/4W

R714 1-249-413-11 CARBON 470 5% 1/4W F

R715 1-249-413-11 CARBON 470 5% 1/4W F

R716 1-249-413-11 CARBON 470 5% 1/4W F

R721 1-249-420-11 CARBON 1.8K 5% 1/4W F

R722 1-249-427-11 CARBON 6.8K 5% 1/4W F

R731 1-249-420-11 CARBON 1.8K 5% 1/4W F

R732 1-249-427-11 CARBON 6.8K 5% 1/4W F

R752 1-249-433-11 CARBON 22K 5% 1/4W

R753 1-247-903-00 CARBON 1M 5% 1/4W

R754 1-249-429-11 CARBON 10K 5% 1/4W

R755 1-247-843-11 CARBON 3.3K 5% 1/4W

R756 1-247-885-00 CARBON 180K 5% 1/4W

R757 1-249-425-11 CARBON 4.7K 5% 1/4W F

R758 1-249-421-11 CARBON 2.2K 5% 1/4W F

R759 1-247-895-00 CARBON 470K 5% 1/4W

R760 1-247-887-00 CARBON 220K 5% 1/4W

R771 1-249-420-11 CARBON 1.8K 5% 1/4W F

R772 1-249-427-11 CARBON 6.8K 5% 1/4W F

R781 1-249-420-11 CARBON 1.8K 5% 1/4W F

R782 1-249-427-11 CARBON 6.8K 5% 1/4W F

R1501 1-247-807-31 CARBON 100 5% 1/4W

(AEP,UK,EE)

R1502 1-249-432-11 CARBON 18K 5% 1/4W

(AEP,UK,EE)

R1503 1-249-426-11 CARBON 5.6K 5% 1/4W

(AEP,UK,EE)

R1504 1-249-441-11 CARBON 100K 5% 1/4W

(AEP,UK,EE)

R1505 1-249-441-11 CARBON 100K 5% 1/4W

(AEP,UK,EE)

R1506 1-260-079-11 CARBON 22 5% 1/2W

(AEP,UK,EE)

R1507 1-249-417-11 CARBON 1K 5% 1/4W F

(AEP,UK,EE)

R1508 1-249-429-11 CARBON 10K 5% 1/4W

(AEP,UK,EE)

R1509 1-249-429-11 CARBON 10K 5% 1/4W

(AEP,UK,EE)

R1510 1-247-903-00 CARBON 1M 5% 1/4W

(AEP,UK,EE)

< VIBRATOR >

X1501 1-579-900-21 VIBRATOR, CRYSTAL (4.332MHz)(AEP,UK,EE)

**************************************************************

A-4673-402-A BD (CD) BOARD, COMPLETE

***********************

< CAPACITOR >

C101 1-126-607-11 ELECT CHIP 47uF 20% 4V

C102 1-163-275-11 CERAMIC CHIP 0.001uF 5% 50V

C103 1-164-346-11 CERAMIC CHIP 1uF 16V

C105 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C106 1-164-695-11 CERAMIC CHIP 0.0022uF 5% 50V

C107 1-164-695-11 CERAMIC CHIP 0.0022uF 5% 50V

C108 1-163-021-91 CERAMIC CHIP 0.01uF 10% 50V

C109 1-163-021-91 CERAMIC CHIP 0.01uF 10% 50V

C110 1-163-989-11 CERAMIC CHIP 0.033uF 10% 25V

C111 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C112 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C113 1-164-695-11 CERAMIC CHIP 0.0022uF 5% 50V

C114 1-164-005-11 CERAMIC CHIP 0.47uF 25V

C115 1-126-607-11 ELECT CHIP 47uF 20% 4V

C116 1-163-016-00 CERAMIC CHIP 0.0039uF 10% 50V

C117 1-164-005-11 CERAMIC CHIP 0.47uF 25V

C118 1-107-823-11 CERAMIC CHIP 0.47uF 10% 16V

C119 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C120 1-135-201-11 TANTALUM CHIP 10uF 20% 4V

C121 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C122 1-163-021-91 CERAMIC CHIP 0.01uF 10% 50V

C123 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C124 1-126-607-11 ELECT CHIP 47uF 20% 4V

C125 1-163-021-91 CERAMIC CHIP 0.01uF 10% 50V

C126 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C127 1-164-695-11 CERAMIC CHIP 0.0022uF 5% 50V

C128 1-163-135-00 CERAMIC CHIP 560PF 5% 50V

C129 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C130 1-164-336-11 CERAMIC CHIP 0.33uF 25V

C131 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C132 1-163-037-11 CERAMIC CHIP 0.022uF 10% 25V

C133 1-163-145-00 CERAMIC CHIP 0.0015uF 5% 50V

C134 1-164-346-11 CERAMIC CHIP 1uF 16V

C135 1-163-251-11 CERAMIC CHIP 100PF 5% 50V

C136 1-164-005-11 CERAMIC CHIP 0.47uF 25V

C137 1-163-021-91 CERAMIC CHIP 0.01uF 10% 50V

C139 1-163-235-11 CERAMIC CHIP 22PF 5% 50V

C140 1-163-235-11 CERAMIC CHIP 22PF 5% 50V

C141 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C142 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C145 1-135-201-11 TANTALUM CHIP 10uF 20% 4V

C146 1-135-201-11 TANTALUM CHIP 10uF 20% 4V

C147 1-163-275-11 CERAMIC CHIP 0.001uF 5% 50V

C148 1-163-275-11 CERAMIC CHIP 0.001uF 5% 50V

C149 1-164-346-11 CERAMIC CHIP 1uF 16V

C153 1-135-259-11 TANTAL. CHIP 10uF 20% 6.3V

C154 1-163-235-11 CERAMIC CHIP 22PF 5% 50V

AUDIO

– 104 –

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

< CONNECTOR >

CNU101 1-770-014-11 CONNECTOR, FFC/FPC 16P

CNU102 1-770-013-11 CONNECTOR, FFC/FPC 19P

< IC >

IC101 8-752-069-56 IC CXA1782BQ

IC102 8-759-291-06 IC BA6397FP-T1

IC103 8-752-372-94 IC CXD2507AQ

IC104 8-759-185-29 IC PCM1710U-B

< TRANSISTOR >

Q101 8-729-010-08 TRANSISTOR MSB710-R

Q102 8-729-424-08 TRANSISTOR UN2111

Q103 8-729-421-22 TRANSISTOR UN2211

< RESISTOR >

R102 1-216-001-00 METAL CHIP 10 5% 1/10W

R103 1-216-049-91 RES,CHIP 1K 5% 1/10W

R104 1-216-097-91 RES,CHIP 100K 5% 1/10W

R105 1-216-093-00 METAL CHIP 68K 5% 1/10W

R106 1-216-093-00 METAL CHIP 68K 5% 1/10W

R107 1-216-093-00 METAL CHIP 68K 5% 1/10W

R108 1-216-093-00 METAL CHIP 68K 5% 1/10W

R109 1-216-097-91 RES,CHIP 100K 5% 1/10W

R112 1-216-083-00 METAL CHIP 27K 5% 1/10W

R113 1-216-083-00 METAL CHIP 27K 5% 1/10W

R114 1-216-101-00 METAL CHIP 150K 5% 1/10W

R115 1-216-101-00 METAL CHIP 150K 5% 1/10W

R116 1-216-061-00 METAL CHIP 3.3K 5% 1/10W

R117 1-216-069-00 METAL CHIP 6.8K 5% 1/10W

R118 1-216-049-91 RES,CHIP 1K 5% 1/10W

R119 1-216-089-91 RES,CHIP 47K 5% 1/10W

R120 1-216-089-91 RES,CHIP 47K 5% 1/10W

R121 1-216-114-00 RES,CHIP 510K 5% 1/10W

R122 1-216-097-91 RES,CHIP 100K 5% 1/10W

R123 1-216-099-00 METAL CHIP 120K 5% 1/10W

R124 1-216-091-00 METAL CHIP 56K 5% 1/10W

R125 1-216-069-00 METAL CHIP 6.8K 5% 1/10W

R126 1-216-063-91 RES,CHIP 3.9K 5% 1/10W

R127 1-216-089-91 RES,CHIP 47K 5% 1/10W

R128 1-216-105-91 RES,CHIP 220K 5% 1/10W

R129 1-216-049-91 RES,CHIP 1K 5% 1/10W

R130 1-216-079-00 METAL CHIP 18K 5% 1/10W

R131 1-216-079-00 METAL CHIP 18K 5% 1/10W

R132 1-216-061-00 METAL CHIP 3.3K 5% 1/10W

R133 1-216-061-00 METAL CHIP 3.3K 5% 1/10W

R134 1-216-065-91 RES,CHIP 4.7K 5% 1/10W

R135 1-216-065-91 RES,CHIP 4.7K 5% 1/10W

R136 1-216-073-00 METAL CHIP 10K 5% 1/10W

R137 1-216-065-91 RES,CHIP 4.7K 5% 1/10W

R138 1-216-049-91 RES,CHIP 1K 5% 1/10W

R139 1-216-033-00 METAL CHIP 220 5% 1/10W

R140 1-216-081-00 METAL CHIP 22K 5% 1/10W

R141 1-216-061-00 METAL CHIP 3.3K 5% 1/10W

R142 1-216-061-00 METAL CHIP 3.3K 5% 1/10W

R143 1-216-121-91 RES,CHIP 1M 5% 1/10W

R144 1-216-073-00 METAL CHIP 10K 5% 1/10W

R145 1-216-097-91 RES,CHIP 100K 5% 1/10W

R146 1-216-097-91 RES,CHIP 100K 5% 1/10W

R147 1-216-049-91 RES,CHIP 1K 5% 1/10W

R148 1-216-049-91 RES,CHIP 1K 5% 1/10W

R149 1-216-049-91 RES,CHIP 1K 5% 1/10W

R150 1-216-037-00 METAL CHIP 330 5% 1/10W

R151 1-216-037-00 METAL CHIP 330 5% 1/10W

R152 1-216-037-00 METAL CHIP 330 5% 1/10W

R153 1-216-082-00 RES,CHIP 24K 5% 1/10W

R154 1-216-065-91 RES,CHIP 4.7K 5% 1/10W

R156 1-216-085-00 METAL CHIP 33K 5% 1/10W

R157 1-216-069-00 METAL CHIP 6.8K 5% 1/10W

R158 1-216-001-00 METAL CHIP 10 5% 1/10W

< VARIABLE RESISTOR >

RV101 1-223-587-11 RES, ADJ, CARBON 22K

RV102 1-223-587-11 RES, ADJ, CARBON 22K

RV103 1-223-587-11 RES, ADJ, CARBON 22K

< SWITCH >

S101 1-572-085-11 SWITCH, LEAF (LIMIT)

< VIBRATOR >

X101 1-579-280-11 VIBRATOR, CRYSTAL (16.9344MHz)

**************************************************************

*A-4699-808-A BD (MD) BOARD, COMPLETE

***********************

< CAPACITOR >

C101 1-104-851-11 TANTAL. CHIP 10uF 20% 10V

C102 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C103 1-104-851-11 TANTAL. CHIP 10uF 20% 10V

C104 1-104-851-11 TANTAL. CHIP 10uF 20% 10V

C105 1-163-021-91 CERAMIC CHIP 0.01uF 10% 50V

C106 1-163-275-11 CERAMIC CHIP 0.001uF 5% 50V

C107 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C108 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C109 1-163-037-11 CERAMIC CHIP 0.022uF 10% 25V

C110 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C111 1-164-344-11 CERAMIC CHIP 0.068uF 10% 25V

C112 1-163-017-00 CERAMIC CHIP 0.0047uF 5% 50V

C113 1-164-346-11 CERAMIC CHIP 1uF 16V

C115 1-164-489-11 CERAMIC CHIP 0.22uF 10% 16V

C116 1-163-037-11 CERAMIC CHIP 0.022uF 10% 25V

C117 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C118 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C119 1-104-851-11 TANTAL. CHIP 10uF 20% 10V

C121 1-126-206-11 ELECT CHIP 100uF 20% 6.3V

C122 1-163-021-91 CERAMIC CHIP 0.01uF 10% 50V

C123 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C124 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C127 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C128 1-163-021-91 CERAMIC CHIP 0.01uF 10% 50V

C129 1-107-823-11 CERAMIC CHIP 0.47uF 10% 16V

BD (MD)BD (CD)

– 105 –

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

C130 1-163-251-11 CERAMIC CHIP 100PF 5% 50V

C131 1-163-023-00 CERAMIC CHIP 0.015uF 5% 50V

C132 1-107-823-11 CERAMIC CHIP 0.47uF 10% 16V

C133 1-163-017-00 CERAMIC CHIP 0.0047uF 5% 50V

C134 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C135 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C136 1-126-206-11 ELECT CHIP 100uF 20% 6.3V

C139 1-163-235-11 CERAMIC CHIP 22PF 5% 50V

C140 1-163-099-00 CERAMIC CHIP 18PF 5% 50V

C142 1-163-251-11 CERAMIC CHIP 100PF 5% 50V

C143 1-163-251-11 CERAMIC CHIP 100PF 5% 50V

C144 1-163-251-11 CERAMIC CHIP 100PF 5% 50V

C151 1-126-206-11 ELECT CHIP 100uF 20% 6.3V

C152 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C153 1-163-021-91 CERAMIC CHIP 0.01uF 10% 50V

C156 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C158 1-163-019-00 CERAMIC CHIP 0.0068uF 10% 50V

C160 1-104-601-11 ELECT CHIP 10uF 20% 10V

C161 1-104-601-11 ELECT CHIP 10uF 20% 10V

C163 1-163-021-91 CERAMIC CHIP 0.01uF 10% 50V

C164 1-163-021-91 CERAMIC CHIP 0.01uF 10% 50V

C167 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C168 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C169 1-104-851-11 TANTAL. CHIP 10uF 20% 10V

C171 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C181 1-126-206-11 ELECT CHIP 100uF 20% 6.3V

C182 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C183 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C184 1-117-970-11 ELECT CHIP 22uF 20% 10V

C185 1-164-611-11 CERAMIC CHIP 0.001uF 10% 500V

C188 1-163-021-91 CERAMIC CHIP 0.01uF 10% 50V

C189 1-163-989-11 CERAMIC CHIP 0.033uF 10% 25V

C190 1-126-206-11 ELECT CHIP 100uF 20% 6.3V

C191 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C192 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C197 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C201 1-164-695-11 CERAMIC CHIP 0.0022uF 5% 50V

C202 1-164-695-11 CERAMIC CHIP 0.0022uF 5% 50V

C203 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C205 1-126-206-11 ELECT CHIP 100uF 20% 6.3V

C206 1-115-363-11 CERAMIC CHIP 10uF 10V

C207 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C208 1-115-363-11 CERAMIC CHIP 10uF 10V

C209 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C210 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C212 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C213 1-115-363-11 CERAMIC CHIP 10uF 10V

C214 1-115-363-11 CERAMIC CHIP 10uF 10V

C216 1-124-779-00 ELECT CHIP 10uF 20% 16V

C350 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C352 1-124-779-00 ELECT CHIP 10uF 20% 16V

C353 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C354 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C355 1-163-251-11 CERAMIC CHIP 100PF 5% 50V

C357 1-163-021-91 CERAMIC CHIP 0.01uF 10% 50V

C358 1-163-251-11 CERAMIC CHIP 100PF 5% 50V

C359 1-163-251-11 CERAMIC CHIP 100PF 5% 50V

C361 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C362 1-163-251-11 CERAMIC CHIP 100PF 5% 50V

C363 1-163-251-11 CERAMIC CHIP 100PF 5% 50V

C401 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C402 1-163-021-91 CERAMIC CHIP 0.01uF 10% 50V

C2001 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C2002 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C2003 1-163-038-91 CERAMIC CHIP 0.1uF 25V

C2004 1-163-038-91 CERAMIC CHIP 0.1uF 25V

< CONNECTOR >

CN101 1-766-508-11 CONNECTOR, FFC/FPC (ZIF) 22P

CN104 1-778-283-11 CONNECTOR, FFC/FPC 4P

CN106 1-774-771-11 CONNECTOR, FFC/FPC 14P

CN107 1-779-854-11 CONNECTOR, FFC/FPC 25P

< DIODE >

D101 8-719-988-62 DIODE 1SS355

D181 8-719-046-86 DIODE F1J6TP

D183 8-719-046-86 DIODE F1J6TP

< IC >

IC101 8-752-080-95 IC CXA2523AR

IC103 8-729-903-10 IC TRANSISTOR FMW1

IC121 8-752-384-47 IC CXD2652AR

IC124 8-759-536-21 IC MSM51V4400D-10TSK-FS

IC152 8-759-430-25 IC BH6511FS-E2

IC153 8-759-481-19 IC LB1830M-S-TE-L

IC171 8-759-484-73 IC BR24C01AF-E2

IC181 8-759-481-17 IC MC74ACT08DTR2

IC192 8-759-460-72 IC BA033FP-E2

IC201 8-759-471-38 IC AK4520A-VF-E2

IC316 8-759-568-55 IC M30610MCA-272FP

IC401 8-759-242-70 IC TC7WU04F

< COIL >

L101 1-414-235-11 INDUCTOR CHIP 0uH

L102 1-414-235-11 INDUCTOR CHIP 0uH

L103 1-414-235-11 INDUCTOR CHIP 0uH

L105 1-414-235-11 INDUCTOR CHIP 0uH

L106 1-414-235-11 INDUCTOR CHIP 0uH

L121 1-414-235-11 INDUCTOR CHIP 0uH

L122 1-414-235-11 INDUCTOR CHIP 0uH

L151 1-412-622-51 INDUCTOR 10uH

L152 1-412-622-51 INDUCTOR 10uH

L153 1-412-039-51 INDUCTOR CHIP 100uH

L154 1-412-039-51 INDUCTOR CHIP 100uH

L161 1-414-235-11 INDUCTOR CHIP 0uH

L162 1-414-235-11 INDUCTOR CHIP 0uH

L181 1-424-675-11 INDUCTOR 0uH

L201 1-412-776-11 INDUCTOR 1uH

L301 1-414-235-11 INDUCTOR CHIP 0uH

L351 1-216-295-91 SHORT 0

L401 1-216-025-91 RES,CHIP 100 5% 1/10W

L1001 1-500-445-21 FERRITE 0uH

BD (MD)

– 106 –

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

< TRANSISTOR >

Q101 8-729-028-91 TRANSISTOR RT1P441M-TP-1

Q102 8-729-026-53 TRANSISTOR 2SA1576A-T106-QR

Q103 8-729-028-99 TRANSISTOR RT1N144M-TP-1

Q104 8-729-028-99 TRANSISTOR RT1N144M-TP-1

Q162 8-729-101-07 TRANSISTOR 2SB798-DL

Q163 8-729-028-91 TRANSISTOR RT1P441M-TP-1

Q181 8-729-018-75 TRANSISTOR 2SJ278MY

Q182 8-729-017-65 TRANSISTOR 2SK1764KY

Q350 8-729-028-99 TRANSISTOR RT1N144M-TP-1

< RESISTOR >

R101 1-216-025-91 RES,CHIP 100 5% 1/10W

R103 1-216-049-91 RES,CHIP 1K 5% 1/10W

R104 1-216-073-00 METAL CHIP 10K 5% 1/10W

R105 1-216-065-91 RES,CHIP 4.7K 5% 1/10W

R106 1-216-133-00 METAL CHIP 3.3M 5% 1/10W

R107 1-216-113-00 METAL CHIP 470K 5% 1/10W

R110 1-216-073-00 METAL CHIP 10K 5% 1/10W

R112 1-216-089-91 RES,CHIP 47K 5% 1/10W

R113 1-216-049-91 RES,CHIP 1K 5% 1/10W

R115 1-216-049-91 RES,CHIP 1K 5% 1/10W

R117 1-216-113-00 METAL CHIP 470K 5% 1/10W

R121 1-216-097-91 RES,CHIP 100K 5% 1/10W

R125 1-216-025-91 RES,CHIP 100 5% 1/10W

R128 1-216-041-00 METAL CHIP 470 5% 1/10W

R131 1-216-073-00 METAL CHIP 10K 5% 1/10W

R132 1-216-097-91 RES,CHIP 100K 5% 1/10W

R133 1-216-117-00 METAL CHIP 680K 5% 1/10W

R134 1-216-049-91 RES,CHIP 1K 5% 1/10W

R135 1-216-061-00 METAL CHIP 3.3K 5% 1/10W

R136 1-216-049-91 RES,CHIP 1K 5% 1/10W

R137 1-216-025-91 RES,CHIP 100 5% 1/10W

R140 1-216-029-00 METAL CHIP 150 5% 1/10W

R142 1-216-073-00 METAL CHIP 10K 5% 1/10W

R143 1-216-073-00 METAL CHIP 10K 5% 1/10W

R144 1-216-025-91 RES,CHIP 100 5% 1/10W

R146 1-216-037-00 METAL CHIP 330 5% 1/10W

R147 1-216-025-91 RES,CHIP 100 5% 1/10W

R148 1-216-045-00 METAL CHIP 680 5% 1/10W

R158 1-216-097-91 RES,CHIP 100K 5% 1/10W

R159 1-216-097-91 RES,CHIP 100K 5% 1/10W

R161 1-216-057-00 METAL CHIP 2.2K 5% 1/10W

R162 1-216-057-00 METAL CHIP 2.2K 5% 1/10W

R163 1-216-057-00 METAL CHIP 2.2K 5% 1/10W

R164 1-216-033-00 METAL CHIP 220 5% 1/10W

R165 1-216-097-91 RES,CHIP 100K 5% 1/10W

R166 1-220-149-11 REGISTER 2.2 10% 1/2W

R167 1-216-065-91 RES,CHIP 4.7K 5% 1/10W

R169 1-219-724-11 METAL CHIP 1 1% 1/4W

R170 1-216-073-00 METAL CHIP 10K 5% 1/10W

R171 1-216-073-00 METAL CHIP 10K 5% 1/10W

R175 1-216-061-00 METAL CHIP 3.3K 5% 1/10W

R177 1-216-061-00 METAL CHIP 3.3K 5% 1/10W

R178 1-216-295-91 SHORT 0

R179 1-216-091-00 METAL CHIP 56K 5% 1/10W

R180 1-216-073-00 METAL CHIP 10K 5% 1/10W

R182 1-216-089-91 RES,CHIP 47K 5% 1/10W

R183 1-216-089-91 RES,CHIP 47K 5% 1/10W

R184 1-216-073-00 METAL CHIP 10K 5% 1/10W

R188 1-216-073-00 METAL CHIP 10K 5% 1/10W

R189 1-216-073-00 METAL CHIP 10K 5% 1/10W

R190 1-216-073-00 METAL CHIP 10K 5% 1/10W

R195 1-216-295-91 SHORT 0

R196 1-216-295-91 SHORT 0

R197 1-216-295-91 SHORT 0

R198 1-216-295-91 SHORT 0

R199 1-216-295-91 SHORT 0

R200 1-216-295-91 SHORT 0

R202 1-216-041-00 METAL CHIP 470 5% 1/10W

R203 1-216-025-91 RES,CHIP 100 5% 1/10W

R204 1-216-025-91 RES,CHIP 100 5% 1/10W

R210 1-216-041-00 METAL CHIP 470 5% 1/10W

R330 1-216-073-00 METAL CHIP 10K 5% 1/10W

R331 1-216-073-00 METAL CHIP 10K 5% 1/10W

R332 1-216-097-91 RES,CHIP 100K 5% 1/10W

R333 1-216-073-00 METAL CHIP 10K 5% 1/10W

R351 1-216-053-00 METAL CHIP 1.5K 5% 1/10W

R352 1-216-061-00 METAL CHIP 3.3K 5% 1/10W

R356 1-216-025-91 RES,CHIP 100 5% 1/10W

R361 1-216-073-00 METAL CHIP 10K 5% 1/10W

R362 1-216-025-91 RES,CHIP 100 5% 1/10W

R363 1-216-073-00 METAL CHIP 10K 5% 1/10W

R366 1-216-097-91 RES,CHIP 100K 5% 1/10W

R367 1-216-097-91 RES,CHIP 100K 5% 1/10W

R379 1-216-073-00 METAL CHIP 10K 5% 1/10W

R380 1-216-073-00 METAL CHIP 10K 5% 1/10W

R381 1-216-073-00 METAL CHIP 10K 5% 1/10W

R382 1-216-073-00 METAL CHIP 10K 5% 1/10W

R383 1-216-073-00 METAL CHIP 10K 5% 1/10W

R384 1-216-073-00 METAL CHIP 10K 5% 1/10W

R386 1-216-073-00 METAL CHIP 10K 5% 1/10W

R387 1-216-069-00 METAL CHIP 6.8K 5% 1/10W

R388 1-216-069-00 METAL CHIP 6.8K 5% 1/10W

R389 1-216-069-00 METAL CHIP 6.8K 5% 1/10W

R391 1-216-073-00 METAL CHIP 10K 5% 1/10W

R393 1-216-073-00 METAL CHIP 10K 5% 1/10W

R400 1-216-073-00 METAL CHIP 10K 5% 1/10W

R401 1-216-089-91 RES,CHIP 47K 5% 1/10W

R402 1-216-113-00 METAL CHIP 470K 5% 1/10W

R405 1-216-063-91 RES,CHIP 3.9K 5% 1/10W

R420 1-216-097-91 RES,CHIP 100K 5% 1/10W

R421 1-216-097-91 RES,CHIP 100K 5% 1/10W

R422 1-216-097-91 RES,CHIP 100K 5% 1/10W

R423 1-216-097-91 RES,CHIP 100K 5% 1/10W

R424 1-216-097-91 RES,CHIP 100K 5% 1/10W

R425 1-216-097-91 RES,CHIP 100K 5% 1/10W

R429 1-216-097-91 RES,CHIP 100K 5% 1/10W

R430 1-216-097-91 RES,CHIP 100K 5% 1/10W

R431 1-216-097-91 RES,CHIP 100K 5% 1/10W

R432 1-216-097-91 RES,CHIP 100K 5% 1/10W

R433 1-216-097-91 RES,CHIP 100K 5% 1/10W

R434 1-216-097-91 RES,CHIP 100K 5% 1/10W

R435 1-216-097-91 RES,CHIP 100K 5% 1/10W

BD (MD)

– 107 –

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

R438 1-216-097-91 RES,CHIP 100K 5% 1/10W

R439 1-216-097-91 RES,CHIP 100K 5% 1/10W

R440 1-216-097-91 RES,CHIP 100K 5% 1/10W

R441 1-216-097-91 RES,CHIP 100K 5% 1/10W

R442 1-216-097-91 RES,CHIP 100K 5% 1/10W

R443 1-216-097-91 RES,CHIP 100K 5% 1/10W

R444 1-216-097-91 RES,CHIP 100K 5% 1/10W

R445 1-216-097-91 RES,CHIP 100K 5% 1/10W

R448 1-216-097-91 RES,CHIP 100K 5% 1/10W

R449 1-216-097-91 RES,CHIP 100K 5% 1/10W

R451 1-216-097-91 RES,CHIP 100K 5% 1/10W

R454 1-216-097-91 RES,CHIP 100K 5% 1/10W

R455 1-216-097-91 RES,CHIP 100K 5% 1/10W

R456 1-216-097-91 RES,CHIP 100K 5% 1/10W

R457 1-216-097-91 RES,CHIP 100K 5% 1/10W

R458 1-216-097-91 RES,CHIP 100K 5% 1/10W

R460 1-216-073-00 METAL CHIP 10K 5% 1/10W

R462 1-216-073-00 METAL CHIP 10K 5% 1/10W

R502 1-216-295-91 SHORT 0

R504 1-216-295-91 SHORT 0

R600 1-216-053-00 METAL CHIP 1.5K 5% 1/10W

R602 1-216-025-91 RES,CHIP 100 5% 1/10W

R603 1-216-025-91 RES,CHIP 100 5% 1/10W

R604 1-216-061-00 METAL CHIP 3.3K 5% 1/10W

R605 1-216-025-91 RES,CHIP 100 5% 1/10W

R606 1-216-061-00 METAL CHIP 3.3K 5% 1/10W

R607 1-216-061-00 METAL CHIP 3.3K 5% 1/10W

R608 1-216-025-91 RES,CHIP 100 5% 1/10W

R2001 1-216-001-00 METAL CHIP 10 5% 1/10W

R2002 1-216-296-91 SHORT 0

< VIBRATOR >

X101 1-767-286-11 VIBRATOR, CRYSTAL (22.5792MHz)

X302 1-767-670-11 VIBRATOR, CERAMIC (7MHz)

**************************************************************

*1-671-020-21 HP BOARD

********

< CAPACITOR >

C1401 1-162-294-31 CERAMIC 0.001uF 10% 50V

C1402 1-162-294-31 CERAMIC 0.001uF 10% 50V

< JACK >

J1400 1-764-106-21 JACK (PHONES)

**************************************************************

*A-4414-823-A JACK BOARD, COMPLETE (MY,SP,JE,HK,AR,AUS)

********************

*A-4414-826-A JACK BOARD, COMPLETE (US,CND)

********************

*A-4414-830-A JACK BOARD, COMPLETE (AEP,UK,EE)

********************

< CAPACITOR >

C401 1-162-282-21 CERAMIC 100PF 10% 50V

C411 1-162-282-31 CERAMIC 100PF 10% 50V

C412 1-162-290-31 CERAMIC 470PF 10% 50V

C413 1-126-964-11 ELECT 10uF 20% 50V

C421 1-162-282-31 CERAMIC 100PF 10% 50V

C422 1-162-282-31 CERAMIC 100PF 10% 50V

C431 1-126-934-11 ELECT 220uF 20% 10V

C432 1-126-933-11 ELECT 100uF 20% 16V

C448 1-136-165-00 FILM 0.1uF 5% 50V

(AEP,UK,EE)

C449 1-136-165-00 FILM 0.1uF 5% 50V

(AEP,UK,EE)

C498 1-136-165-00 FILM 0.1uF 5% 50V

(AEP,UK,EE)

C499 1-136-165-00 FILM 0.1uF 5% 50V

(AEP,UK,EE)

C451 1-162-282-31 CERAMIC 100PF 10% 50V

C461 1-162-282-31 CERAMIC 100PF 10% 50V

C462 1-162-290-31 CERAMIC 470PF 10% 50V

C463 1-126-964-11 ELECT 10uF 20% 50V

C473 1-136-173-00 FILM 0.47uF 5% 50V

< CONNECTOR >

*CN401 1-568-858-11 SOCKET, CONNECTOR 15P

CN402 1-564-506-11 PLUG, CONNECTOR 3P

CN404 1-770-379-11 CONNECTOR, BOARD TO BOARD 6P

*CN420 1-565-561-11 PIN, CONNECTOR 3P

*CN430 1-565-500-11 CONNECTOR, BOARD TO BOARD 9P

*CN490 1-568-943-11 PIN, CONNECTOR 5P

< DIODE >

D422 8-719-911-19 DIODE 1SS119-25

D430 8-719-911-19 DIODE 1SS119-25

D447 8-719-911-19 DIODE 1SS119-25

D497 8-719-911-19 DIODE 1SS119-25

< JACK >

J401 1-764-767-21 JACK, PIN 2P (TAPE INPUT)

J402 1-764-767-21 JACK, PIN 2P (TAPE OUTPUT)

< COIL >

L448 1-420-872-00 COIL, AIR-CORE

L498 1-420-872-00 COIL, AIR-CORE

< TRANSISTOR >

Q400 8-729-620-05 TRANSISTOR 2SC2603-EF

Q410 8-729-141-30 TRANSISTOR 2SC3623A-LK

Q420 8-729-620-05 TRANSISTOR 2SC2603-EF

BD (MD) JACK

– 108 –

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

MAIN

Q431 8-729-900-80 TRANSISTOR DTC114ES

Q432 8-729-620-05 TRANSISTOR 2SC2603-EF

Q433 8-729-620-05 TRANSISTOR 2SC2603-EF

Q434 8-729-119-76 TRANSISTOR 2SA1175-HFE

Q435 8-729-620-05 TRANSISTOR 2SC2603-EF

Q436 8-729-620-05 TRANSISTOR 2SC2603-EF

Q450 8-729-620-05 TRANSISTOR 2SC2603-EF

Q460 8-729-141-30 TRANSISTOR 2SC3623A-LK

< RESISTOR >

R401 1-249-417-11 CARBON 1K 5% 1/4W F

R402 1-249-441-11 CARBON 100K 5% 1/4W

R403 1-249-425-11 CARBON 4.7K 5% 1/4W F

R404 1-249-425-11 CARBON 4.7K 5% 1/4W F

R405 1-249-429-11 CARBON 10K 5% 1/4W

R411 1-249-441-11 CARBON 100K 5% 1/4W

R412 1-249-417-11 CARBON 1K 5% 1/4W F

R413 1-249-429-11 CARBON 10K 5% 1/4W

R414 1-249-421-11 CARBON 2.2K 5% 1/4W F

R415 1-249-441-11 CARBON 100K 5% 1/4W

R421 1-249-393-11 CARBON 10 5% 1/4W F

R422 1-249-429-11 CARBON 10K 5% 1/4W

R423 1-249-425-11 CARBON 4.7K 5% 1/4W F

R424 1-249-831-11 CARBON 1K 5% 1/4W

R431 1-249-437-11 CARBON 47K 5% 1/4W

R433 1-249-433-11 CARBON 22K 5% 1/4W

R434 1-249-431-11 CARBON 15K 5% 1/4W

R435 1-249-437-11 CARBON 47K 5% 1/4W

R436 1-249-433-11 CARBON 22K 5% 1/4W

R437 1-249-417-11 CARBON 1K 5% 1/4W F

!R444 1-215-914-11 METAL OXIDE 330 5% 3W F

(US,CND,MY,SP,JE,HK,AR,AUS)

!R444 1-216-478-11 METAL OXIDE 390 5% 3W F

(AEP,UK,EE)

R445 1-260-089-11 CARBON 150 5% 1/2W

R446 1-260-089-11 CARBON 150 5% 1/2W

R447 1-249-431-11 CARBON 15K 5% 1/4W

R448 1-260-076-11 CARBON 10 5% 1/2W

R449 1-260-076-11 CARBON 10 5% 1/2W

(AEP,UK,EE)

R451 1-249-417-11 CARBON 1K 5% 1/4W F

R452 1-249-441-11 CARBON 100K 5% 1/4W

R453 1-249-425-11 CARBON 4.7K 5% 1/4W F

R454 1-249-425-11 CARBON 4.7K 5% 1/4W F

R455 1-249-429-11 CARBON 10K 5% 1/4W

R461 1-249-441-11 CARBON 100K 5% 1/4W

R462 1-249-417-11 CARBON 1K 5% 1/4W F

R463 1-249-429-11 CARBON 10K 5% 1/4W

R464 1-249-421-11 CARBON 2.2K 5% 1/4W F

R465 1-249-441-11 CARBON 100K 5% 1/4W

R495 1-260-089-11 CARBON 150 5% 1/2W

R496 1-260-089-11 CARBON 150 5% 1/2W

R497 1-249-431-11 CARBON 15K 5% 1/4W

R498 1-260-076-11 CARBON 10 5% 1/2W

R499 1-260-076-11 CARBON 10 5% 1/2W

(AEP,UK,EE)

< RELAY >

RY430 1-515-833-11 RELAY

< TERMINAL >

TM440 1-537-238-31 TERMINAL BOARD (SPEAKER)

**************************************************************

*1-634-461-11 LOADING BOARD

*************

< CONNECTOR >

*CN291 1-564-498-11 PIN, CONNECTOR 5P

< SWITCH >

S291 1-571-924-11 SWITCH, LEAF (LOAD OUT)

S292 1-571-924-11 SWITCH, LEAF (LOAD IN)

**************************************************************

*A-4417-124-A MAIN BOARD, COMPLETE (AEP,UK,EE)

********************

*A-4417-128-A MAIN BOARD, COMPLETE (MY,SP,JE,HK,AR,AUS)

********************

*A-4417-132-A MAIN BOARD, COMPLETE (US,CND)

********************

< CAPACITOR >

C501 1-128-548-11 ELECT 4700uF 20% 25V

C502 1-104-665-11 ELECT 100uF 20% 25V

C503 1-136-165-00 FILM 0.1uF 5% 50V

C504 1-136-165-00 FILM 0.1uF 5% 50V

C511 1-126-795-11 ELECT 10uF 20% 25V

C512 1-126-767-11 ELECT 1000uF 20% 16V

C513 1-162-306-11 CERAMIC 0.01uF 20% 16V

C514 1-126-926-11 ELECT 1000uF 20% 10V

C515 1-126-934-11 ELECT 220uF 20% 16V

C516 1-126-933-11 ELECT 100uF 20% 16V

C522 1-126-934-11 ELECT 220uF 20% 16V

C523 1-126-934-11 ELECT 220uF 20% 16V

C525 1-126-933-11 ELECT 100uF 20% 16V

C531 1-126-969-11 ELECT 220uF 20% 50V

C532 1-126-969-11 ELECT 220uF 20% 50V

C533 1-126-969-11 ELECT 220uF 20% 50V

C535 1-126-964-11 ELECT 10uF 20% 50V

C536 1-126-947-11 ELECT 47uF 20% 35V

C550 1-117-850-11 ELECT 15000uF 20% 16V

C551 1-136-165-00 FILM 0.1uF 5% 50V

C552 1-136-165-00 FILM 0.1uF 5% 50V

C561 1-126-791-11 ELECT 10uF 20% 16V

C562 1-126-916-11 ELECT 1000uF 20% 6.3V

C563 1-162-306-11 CERAMIC 0.01uF 20% 16V

C564 1-126-964-11 ELECT 10uF 20% 50V

C565 1-126-916-11 ELECT 1000uF 20% 6.3V

C566 1-126-916-11 ELECT 1000uF 20% 6.3V

C572 1-126-960-11 ELECT 1uF 20% 50V

LOADINGJACK

Les composants identifiés par une

marque ! sont critiques pour la

sécurité.

Ne les remplacer que par une

piéce portant le numéro spécifié.

The components identified by

mark ! or dotted line with mark

! are critical for safety.

Replace only with part number

specified.

– 109 –

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

MAIN

C573 1-126-965-11 ELECT 22uF 20% 50V

C574 1-126-934-11 ELECT 220uF 20% 10V

C575 1-126-934-11 ELECT 220uF 20% 10V

C576 1-126-964-11 ELECT 10uF 20% 50V

C577 1-126-934-11 ELECT 220uF 20% 10V

C578 1-164-159-11 CERAMIC 0.1uF 50V

C579 1-110-489-11 CAPACITOR 1F 5.5V

C580 1-126-933-11 ELECT 100uF 20% 16V

C591 1-126-163-11 ELECT 4.7uF 20% 50V

C592 1-164-159-11 CERAMIC 0.1uF 50V

C602 1-164-159-11 CERAMIC 0.1uF 50V

C604 1-126-960-11 ELECT 1uF 20% 50V

C608 1-124-261-00 ELECT 10uF 20% 50V

C612 1-124-589-11 ELECT 47uF 20% 16V

C613 1-162-306-11 CERAMIC 0.01uF 20% 16V

C614 1-102-514-11 CERAMIC 22PF 5% 50V

C615 1-102-958-00 CERAMIC 20PF 5% 50V

C616 1-124-589-11 ELECT 47uF 20% 16V

C617 1-162-294-31 CERAMIC 0.001uF 10% 50V

C618 1-136-165-00 FILM 0.1uF 5% 50V

C619 1-136-165-00 FILM 0.1uF 5% 50V

C620 1-136-165-00 FILM 0.1uF 5% 50V

C621 1-124-589-11 ELECT 47uF 20% 16V

C622 1-125-623-11 DOUBLE LAYER 0.22F 0 5.5V

C807 1-164-159-11 CERAMIC 0.1uF 50V

C808 1-104-664-11 ELECT 47uF 20% 16V

C809 1-126-925-11 ELECT 470uF 20% 10V

C814 1-162-306-11 CERAMIC 0.01uF 20% 16V

C815 1-162-306-11 CERAMIC 0.01uF 20% 16V

C816 1-162-306-11 CERAMIC 0.01uF 20% 16V

C817 1-104-664-11 ELECT 47uF 20% 16V

C821 1-124-261-00 ELECT 10uF 20% 50V

C822 1-162-290-31 CERAMIC 470PF 10% 50V

C823 1-126-916-11 ELECT 1000uF 20% 6.3V

C831 1-124-261-00 ELECT 10uF 20% 50V

C832 1-162-290-31 CERAMIC 470PF 10% 50V

C833 1-126-964-11 ELECT 10uF 20% 50V

C834 1-162-306-11 CERAMIC 0.01uF 20% 16V

C835 1-162-285-31 CERAMIC 180PF 10% 50V

C837 1-126-925-11 ELECT 470uF 20% 10V

C839 1-162-282-31 CERAMIC 100PF 10% 50V

C841 1-164-159-11 CERAMIC 0.1uF 50V

C842 1-164-159-11 CERAMIC 0.1uF 50V

C871 1-126-163-11 ELECT 4.7uF 20% 50V

C872 1-126-163-11 ELECT 4.7uF 20% 50V

C881 1-126-959-11 ELECT 0.47uF 20% 50V

< CONNECTOR >

CN503 1-564-511-11 PLUG, CONNECTOR 8P

CN506 1-770-412-11 CONNECTOR, BOARD TO BOARD 6P

CN590 1-564-506-11 PLUG, CONNECTOR 3P

CN801 1-770-067-11 CONNECTOR, FFC/FPC 19P

*CN802 1-564-339-00 PIN, CONNECTOR 5P

CN820 1-770-653-11 CONNECTOR, FFC/FPC 25P

CN850 1-691-648-11 SOCKET, CONNECTOR 15P

CN870 1-568-834-11 SOCKET, CONNECTOR 15P

CN871 1-779-820-11 CONNECTOR, BOARD TO BOARD 14P

CN872 1-779-820-11 CONNECTOR, BOARD TO BOARD 14P

*CN873 1-568-839-11 SOCKET, CONNECTOR 23P

< DIODE >

D501 8-719-200-82 DIODE 11ES2

D502 8-719-200-82 DIODE 11ES2

D503 8-719-200-82 DIODE 11ES2

D504 8-719-200-82 DIODE 11ES2

D511 8-719-110-09 DIODE RD8.2ES-B3

D521 8-719-929-15 DIODE MZS9.1NB2

D531 8-719-200-82 DIODE 11ES2

D532 8-719-200-82 DIODE 11ES2

D533 8-719-200-82 DIODE 11ES2

D534 8-719-983-88 DIODE MTZJ-T-72-33C

D551 8-719-200-02 DIODE 10E2

D552 8-719-200-02 DIODE 10E2

D553 8-719-200-02 DIODE 10E2

D554 8-719-200-02 DIODE 10E2

D561 8-719-200-82 DIODE 11ES2

D562 8-719-911-19 DIODE 1SS119-25

D563 8-719-200-82 DIODE 11ES2

D571 8-719-911-19 DIODE 1SS119-25

D572 8-719-911-19 DIODE 1SS119-25

D581 8-719-911-19 DIODE 1SS119-25

D582 8-719-911-19 DIODE 1SS119-25

D591 8-719-921-80 DIODE MTZJ-11B

D601 8-719-911-19 DIODE 1SS119-25

D602 8-719-911-19 DIODE 1SS119-25

D603 8-719-200-82 DIODE 11ES2

D604 8-719-200-82 DIODE 11ES2

D605 8-719-911-19 DIODE 1SS119-25

D801 8-719-911-19 DIODE 1SS119-25

D802 8-719-911-19 DIODE 1SS119-25

D803 8-719-921-40 DIODE MTZJ-4.7C

D881 8-719-911-19 DIODE 1SS119-25

D882 8-719-911-19 DIODE 1SS119-25

< GROUND TERMINAL >

EPT501 1-537-770-21 TERMINAL BOARD, GROUND

< FERRITE BEAD >

FB802 1-412-473-21 INDUCTOR 0UH

FB803 1-412-473-21 INDUCTOR 0UH

FB805 1-412-473-21 INDUCTOR 0UH

FB806 1-412-473-21 INDUCTOR 0UH

< IC >

IC510 8-759-604-32 IC M5F7810

IC511 8-759-604-86 IC M5F7807L

IC560 8-759-450-47 IC BA05T

IC570 8-759-426-96 IC LA5620

IC601 8-759-545-08 IC uPD78078GF-083-3BA

IC602 8-759-635-63 IC M51943BSL

IC603 8-759-481-02 IC M62016L

IC801 8-759-822-09 IC LB1641

IC840 8-759-269-09 IC SN74HCT04ANS

– 110 –

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

MAIN

IC842 8-759-267-86 IC SN74HC00ANS-E20

< COIL >

L523 1-408-117-00 INDUCTOR 10uH

L601 1-410-509-11 INDUCTOR 10uH

L739 1-410-470-11 INDUCTOR 10uH

< TRANSISTOR >

Q510 8-729-111-29 TRANSISTOR 2SD1616A-K

Q520 8-729-118-00 TRANSISTOR 2SB1116-L

Q521 8-729-119-76 TRANSISTOR 2SA1175-HFE

Q530 8-729-018-59 TRANSISTOR 2SB1375-LC (LB-SONY)

Q561 8-729-118-01 TRANSISTOR 2SB1116

Q562 8-729-422-73 TRANSISTOR UN4212

Q571 8-729-422-57 TRANSISTOR UN4111

Q572 8-729-900-80 TRANSISTOR DTC114ES

Q591 8-729-119-76 TRANSISTOR 2SA1175-HFE

Q592 8-729-021-82 TRANSISTOR 2SD2396K

Q601 8-729-900-80 TRANSISTOR DTC114ES

Q602 8-729-620-05 TRANSISTOR 2SC2603-EF

Q871 8-729-422-57 TRANSISTOR UN4111

Q872 8-729-422-57 TRANSISTOR UN4111

< RESISTOR >

!R510 1-219-786-11 FUSIBLE 22 5% 1/4W F

R511 1-249-413-11 CARBON 470 5% 1/4W F

!R520 1-219-786-11 FUSIBLE 22 5% 1/4W F

R521 1-249-421-11 CARBON 2.2K 5% 1/4W F

R522 1-249-417-11 CARBON 1K 5% 1/4W F

!R530 1-219-153-11 FUSIBLE 10 5% 1/4W F

R531 1-260-095-11 CARBON 470 5% 1/2W

R562 1-249-421-11 CARBON 2.2K 5% 1/4W F

R563 1-249-409-11 CARBON 220 5% 1/4W F

R564 1-247-843-11 CARBON 3.3K 5% 1/4W

R571 1-249-437-11 CARBON 47K 5% 1/4W

R572 1-249-437-11 CARBON 47K 5% 1/4W

R573 1-249-437-11 CARBON 47K 5% 1/4W

R576 1-249-429-11 CARBON 10K 5% 1/4W

R581 1-249-425-11 CARBON 4.7K 5% 1/4W F

R582 1-249-425-11 CARBON 4.7K 5% 1/4W F

!R590 1-217-640-11 FUSIBLE 3.3 5% 1/4W F

R591 1-249-425-11 CARBON 4.7K 5% 1/4W F

R592 1-249-441-11 CARBON 100K 5% 1/4W

R593 1-249-421-11 CARBON 2.2K 5% 1/4W F

R601 1-249-429-11 CARBON 10K 5% 1/4W

R602 1-247-807-31 CARBON 100 5% 1/4W

R603 1-249-429-11 CARBON 10K 5% 1/4W

R604 1-247-807-31 CARBON 100 5% 1/4W

R605 1-249-417-11 CARBON 1K 5% 1/4W F

R606 1-247-807-31 CARBON 100 5% 1/4W

R607 1-247-807-31 CARBON 100 5% 1/4W

R608 1-247-807-31 CARBON 100 5% 1/4W

R609 1-247-807-31 CARBON 100 5% 1/4W

R610 1-247-807-31 CARBON 100 5% 1/4W

R611 1-249-429-11 CARBON 10K 5% 1/4W

R612 1-247-807-31 CARBON 100 5% 1/4W

R613 1-247-807-31 CARBON 100 5% 1/4W

R614 1-247-807-31 CARBON 100 5% 1/4W

R615 1-249-425-11 CARBON 4.7K 5% 1/4W F

R616 1-247-843-11 CARBON 3.3K 5% 1/4W

R617 1-249-413-11 CARBON 470 5% 1/4W F

R618 1-249-425-11 CARBON 4.7K 5% 1/4W F

R619 1-247-843-11 CARBON 3.3K 5% 1/4W

R620 1-249-413-11 CARBON 470 5% 1/4W F

R621 1-247-843-11 CARBON 3.3K 5% 1/4W

R622 1-247-807-31 CARBON 100 5% 1/4W

R623 1-247-807-31 CARBON 100 5% 1/4W

R624 1-249-429-11 CARBON 10K 5% 1/4W

R625 1-249-429-11 CARBON 10K 5% 1/4W

R626 1-247-807-31 CARBON 100 5% 1/4W

R627 1-247-807-31 CARBON 100 5% 1/4W

R628 1-249-429-11 CARBON 10K 5% 1/4W

R630 1-249-429-11 CARBON 10K 5% 1/4W

R631 1-249-433-11 CARBON 22K 5% 1/4W

R632 1-249-437-11 CARBON 47K 5% 1/4W

R633 1-249-437-11 CARBON 47K 5% 1/4W

R634 1-249-429-11 CARBON 10K 5% 1/4W

R635 1-247-807-31 CARBON 100 5% 1/4W

R636 1-247-807-31 CARBON 100 5% 1/4W

R637 1-247-807-31 CARBON 100 5% 1/4W

R638 1-247-807-31 CARBON 100 5% 1/4W

R639 1-247-807-31 CARBON 100 5% 1/4W

R640 1-247-807-31 CARBON 100 5% 1/4W

R641 1-247-807-31 CARBON 100 5% 1/4W

R642 1-247-807-31 CARBON 100 5% 1/4W

R643 1-247-807-31 CARBON 100 5% 1/4W

R644 1-247-807-31 CARBON 100 5% 1/4W

R645 1-249-425-11 CARBON 4.7K 5% 1/4W F

R646 1-247-843-11 CARBON 3.3K 5% 1/4W

R647 1-249-429-11 CARBON 10K 5% 1/4W

R648 1-249-413-11 CARBON 470 5% 1/4W F

R649 1-247-891-00 CARBON 330K 5% 1/4W

R650 1-249-417-11 CARBON 1K 5% 1/4W F

R651 1-249-417-11 CARBON 1K 5% 1/4W F

R652 1-249-417-11 CARBON 1K 5% 1/4W F

R653 1-249-417-11 CARBON 1K 5% 1/4W F

R654 1-249-417-11 CARBON 1K 5% 1/4W F

R655 1-249-417-11 CARBON 1K 5% 1/4W F

R656 1-249-417-11 CARBON 1K 5% 1/4W F

R801 1-249-417-11 CARBON 1K 5% 1/4W F

R807 1-247-807-31 CARBON 100 5% 1/4W

R821 1-249-441-11 CARBON 100K 5% 1/4W

R822 1-249-417-11 CARBON 1K 5% 1/4W F

R825 1-249-429-11 CARBON 10K 5% 1/4W

R826 1-249-429-11 CARBON 10K 5% 1/4W

R831 1-249-441-11 CARBON 100K 5% 1/4W

R832 1-249-417-11 CARBON 1K 5% 1/4W F

R851 1-249-421-11 CARBON 2.2K 5% 1/4W F

R852 1-249-431-11 CARBON 15K 5% 1/4W

R861 1-249-421-11 CARBON 2.2K 5% 1/4W F

R862 1-249-431-11 CARBON 15K 5% 1/4W

R871 1-249-421-11 CARBON 2.2K 5% 1/4W F

R872 1-249-441-11 CARBON 100K 5% 1/4W

R873 1-247-887-00 CARBON 220K 5% 1/4W

Les composants identifiés par une

marque ! sont critiques pour la

sécurité.

Ne les remplacer que par une

piéce portant le numéro spécifié.

The components identified by

mark ! or dotted line with mark

! are critical for safety.

Replace only with part number

specified.

– 111 –

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

MD LED

R874 1-249-421-11 CARBON 2.2K 5% 1/4W F

R875 1-249-441-11 CARBON 100K 5% 1/4W

R876 1-247-887-00 CARBON 220K 5% 1/4W

R881 1-247-903-00 CARBON 1M 5% 1/4W

< VIBRATOR >

X601 1-760-489-11 VIBRATOR, CERAMIC (5MHz)

X602 1-567-098-41 VIBRATOR, CRYSTAL (32kHz)

**************************************************************

*1-670-745-21 MD LED BOARD

************

< DIODE >

D905 8-719-057-09 DIODE LNJ801LPDJA (MD INDICATOR)

**************************************************************

*A-4417-317-A PANEL BOARD, COMPLETE

*********************

*4-993-866-21 HOLDER (FL)

< CAPACITOR >

C901 1-162-306-11 CERAMIC 0.01uF 20% 16V

C902 1-162-306-11 CERAMIC 0.01uF 20% 16V

C903 1-126-160-11 ELECT 1uF 20% 50V

C923 1-164-159-11 CERAMIC 0.1uF 50V

C935 1-124-261-00 ELECT 10uF 20% 50V

C936 1-124-234-00 ELECT 22uF 20% 16V

C937 1-164-159-11 CERAMIC 0.1uF 50V

C940 1-162-282-31 CERAMIC 100PF 10% 50V

C946 1-164-159-11 CERAMIC 0.1uF 50V

C948 1-162-286-31 CERAMIC 220PF 10% 50V

C949 1-162-286-31 CERAMIC 220PF 10% 50V

C950 1-162-286-31 CERAMIC 220PF 10% 50V

C951 1-162-286-31 CERAMIC 220PF 10% 50V

C952 1-162-286-31 CERAMIC 220PF 10% 50V

C953 1-162-286-31 CERAMIC 220PF 10% 50V

C954 1-162-286-31 CERAMIC 220PF 10% 50V

C955 1-162-286-31 CERAMIC 220PF 10% 50V

C956 1-162-286-31 CERAMIC 220PF 10% 50V

C957 1-162-286-31 CERAMIC 220PF 10% 50V

C958 1-162-286-31 CERAMIC 220PF 10% 50V

C959 1-162-286-31 CERAMIC 220PF 10% 50V

C960 1-162-286-31 CERAMIC 220PF 10% 50V

C961 1-162-286-31 CERAMIC 220PF 10% 50V

C962 1-162-286-31 CERAMIC 220PF 10% 50V

C964 1-126-160-11 ELECT 1uF 20% 50V

C965 1-124-589-11 ELECT 47uF 20% 16V

< CONNECTOR >

*CN901 1-568-865-11 SOCKET, CONNECTOR 23P

< DIODE >

D901 8-719-921-48 DIODE MTZJ-5.6C

D902 8-719-057-10 DIODE LNJ301MPUJAB (^ (MD))

D903 8-719-058-17 DIODE LNG401NPYJA (p (MD))

D904 8-719-057-09 DIODE LNJ801LPDJA (r REC)

D906 8-719-057-10 DIODE LNJ301MPUJAB (^ (CD))

D907 8-719-058-17 DIODE LNG401NPYJA (p (CD))

D908 8-719-057-09 DIODE LNJ801LPDJA (CD INDICATOR)

< FLUORESCENT INDICATOR >

FL901 1-517-687-11 INDICATOR TUBE, FLUORESCENT

< IC >

IC901 8-759-297-23 IC M66004M8FP

IC902 8-759-459-83 IC NJL55H400A

< TRANSISTOR >

Q901 8-729-620-05 TRANSISTOR 2SC2603-EF

Q902 8-729-620-05 TRANSISTOR 2SC2603-EF

Q904 8-729-422-57 TRANSISTOR UN4111

Q905 8-729-422-57 TRANSISTOR UN4111

Q906 8-729-422-57 TRANSISTOR UN4111

Q907 8-729-422-57 TRANSISTOR UN4111

Q908 8-729-422-57 TRANSISTOR UN4111

Q909 8-729-422-57 TRANSISTOR UN4111

Q910 8-729-422-57 TRANSISTOR UN4111

< RESISTOR >

R901 1-249-441-11 CARBON 100K 5% 1/4W

R902 1-249-441-11 CARBON 100K 5% 1/4W

R903 1-249-417-11 CARBON 1K 5% 1/4W F

R904 1-249-417-11 CARBON 1K 5% 1/4W F

R907 1-249-441-11 CARBON 100K 5% 1/4W

R908 1-249-435-11 CARBON 33K 5% 1/4W

R909 1-249-417-11 CARBON 1K 5% 1/4W F

R910 1-249-417-11 CARBON 1K 5% 1/4W F

R911 1-249-417-11 CARBON 1K 5% 1/4W F

R912 1-249-417-11 CARBON 1K 5% 1/4W F

R913 1-249-421-11 CARBON 2.2K 5% 1/4W F

R914 1-247-807-31 CARBON 100 5% 1/4W

R915 1-249-409-11 CARBON 220 5% 1/4W F

R916 1-247-807-31 CARBON 100 5% 1/4W

R917 1-247-807-31 CARBON 100 5% 1/4W

R918 1-249-409-11 CARBON 220 5% 1/4W F

R919 1-247-807-31 CARBON 100 5% 1/4W

R920 1-247-807-31 CARBON 100 5% 1/4W

R921 1-247-807-31 CARBON 100 5% 1/4W

R922 1-247-807-31 CARBON 100 5% 1/4W

R924 1-249-407-11 CARBON 150 5% 1/4W F

R925 1-249-407-11 CARBON 150 5% 1/4W F

R928 1-249-411-11 CARBON 330 5% 1/4W

R930 1-247-807-31 CARBON 100 5% 1/4W

R932 1-249-407-11 CARBON 150 5% 1/4W F

R933 1-249-407-11 CARBON 150 5% 1/4W F

R936 1-247-807-31 CARBON 100 5% 1/4W F

R938 1-249-393-11 CARBON 10 5% 1/4W F

R941 1-249-413-11 CARBON 470 5% 1/4W F

R942 1-249-415-11 CARBON 680 5% 1/4W F

R943 1-249-417-11 CARBON 1K 5% 1/4W F

MAIN PANEL

– 112 –

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

PANEL

R944 1-249-419-11 CARBON 1.5K 5% 1/4W F

R945 1-249-421-11 CARBON 2.2K 5% 1/4W F

R946 1-249-413-11 CARBON 470 5% 1/4W F

R947 1-249-415-11 CARBON 680 5% 1/4W F

R948 1-249-417-11 CARBON 1K 5% 1/4W F

R949 1-249-419-11 CARBON 1.5K 5% 1/4W F

R950 1-249-421-11 CARBON 2.2K 5% 1/4W F

R951 1-249-425-11 CARBON 4.7K 5% 1/4W F

R952 1-249-430-11 CARBON 12K 5% 1/4W

< SWITCH >

S901 1-473-392-11 ENCODER, ROTARY (VOLUME)

S902 1-762-875-21 SWITCH, KEYBOARD (1/u)

S903 1-762-875-21 SWITCH, KEYBOARD (p (CD))

S904 1-762-875-21 SWITCH, KEYBOARD (^ (CD))

S905 1-762-875-21 SWITCH, KEYBOARD (6 (CD))

S906 1-762-875-21 SWITCH, KEYBOARD (p (MD))

S907 1-762-875-21 SWITCH, KEYBOARD (^ (MD))

S908 1-762-875-21 SWITCH, KEYBOARD (6 (MD))

S909 1-762-875-21 SWITCH, KEYBOARD (FUNCTION)

S910 1-762-875-21 SWITCH, KEYBOARD

(MD/CD ) +/TUNING +)

S911 1-762-875-21 SWITCH, KEYBOARD (TUNER/BAND)

S912 1-762-875-21 SWITCH, KEYBOARD

(MD/CD = 0/TUNING -)

S913 1-762-875-21 SWITCH, KEYBOARD (r REC)

S914 1-762-875-21 SWITCH, KEYBOARD (CD-MD SYNC)

S915 1-762-875-21 SWITCH, KEYBOARD (REPEAT/STEREO/MONO)

S916 1-762-875-21 SWITCH, KEYBOARD

(PLAY MODE/TUNING MODE)

**************************************************************

*A-4417-126-A POWER AMP BOARD, COMPLETE (AEP,UK,EE)

*************************

*A-4417-130-A POWER AMP BOARD, COMPLETE

*************************

(MY,SP,JE,HK,AR,AUS)

*A-4417-134-A POWER AMP BOARD, COMPLETE (US,CND)

*************************

< CAPACITOR >

C1201 1-126-963-11 ELECT 4.7uF 20% 50V

C1202 1-162-288-31 CERAMIC 330PF 10% 50V

C1203 1-162-286-31 CERAMIC 220PF 10% 50V

C1204 1-126-967-11 ELECT 47uF 20% 50V

C1205 1-126-967-11 ELECT 47uF 20% 50V

C1206 1-126-948-11 ELECT 100uF 20% 35V

C1207 1-136-165-00 FILM 0.1uF 5% 50V

C1208 1-126-965-11 ELECT 22uF 20% 50V

C1210 1-136-163-00 FILM 0.068uF 5% 50V

C1211 1-136-163-00 FILM 0.068uF 5% 50V

C1220 1-126-924-11 ELECT 330uF 20% 10V

C1251 1-126-963-11 ELECT 4.7uF 20% 50V

C1252 1-162-288-31 CERAMIC 330PF 10% 50V

C1253 1-162-286-31 CERAMIC 220PF 10% 50V

C1254 1-126-967-11 ELECT 47uF 20% 50V

C1255 1-126-967-11 ELECT 47uF 20% 50V

C1256 1-126-948-11 ELECT 100uF 20% 35V

C1257 1-136-165-00 FILM 0.1uF 5% 50V

C1260 1-136-163-00 FILM 0.068uF 5% 50V

C1261 1-136-163-00 FILM 0.068uF 5% 50V

C1301 1-126-042-11 ELECT 3300uF 20% 35V

C1302 1-126-042-11 ELECT 3300uF 20% 35V

C1303 1-136-165-00 FILM 0.1uF 5% 50V

C1304 1-136-165-00 FILM 0.1uF 5% 50V

< CONNECTOR >

*CN1202 1-565-485-11 CONNECTOR, BOARD TO BOARD 9P

< DIODE >

D1201 8-719-911-19 DIODE 1SS119-25

D1202 8-719-911-19 DIODE 1SS119-25

D1203 8-719-911-19 DIODE 1SS119-25

D1213 8-719-911-19 DIODE 1SS119-25

D1251 8-719-911-19 DIODE 1SS119-25

D1263 8-719-911-19 DIODE 1SS119-25

D1300 8-719-025-03 DIODE RBA-402-SL

< IC >

IC1201 8-749-920-13 IC STK4132MK2

< TRANSISTOR >

Q1201 8-729-620-05 TRANSISTOR 2SC2603-EF

Q1202 8-729-900-80 TRANSISTOR DTC114ES

Q1231 8-729-422-73 TRANSISTOR UN4212

Q1232 8-729-620-05 TRANSISTOR 2SC2603-EF

Q1251 8-729-620-05 TRANSISTOR 2SC2603-EF

< RESISTOR >

R1201 1-249-417-11 CARBON 1K 5% 1/4W F

R1202 1-249-437-11 CARBON 47K 5% 1/4W

R1203 1-249-417-11 CARBON 1K 5% 1/4W F

R1204 1-249-437-11 CARBON 47K 5% 1/4W

R1205 1-260-103-11 CARBON 2.2K 5% 1/2W

R1207 1-260-103-11 CARBON 2.2K 5% 1/2W

!R1209 1-212-881-11 FUSIBLE 100 5% 1/4W F

!R1210 1-217-151-00 METAL 0.22 10% 2W

R1211 1-249-417-11 CARBON 1K 5% 1/4W F

R1212 1-249-431-11 CARBON 15K 5% 1/4W

R1214 1-260-099-11 CARBON 1K 5% 1/2W

R1217 1-260-099-11 CARBON 1K 5% 1/2W

R1218 1-249-397-11 CARBON 22 5% 1/4W F

R1219 1-249-397-11 CARBON 22 5% 1/4W F

R1225 1-249-397-11 CARBON 22 5% 1/4W F

R1226 1-249-429-11 CARBON 10K 5% 1/4W

R1227 1-247-854-11 CARBON 9.1K 5% 1/4W

(AEP,UK,EE,MY,SP,JE,HK,AR,AUS)

R1227 1-249-429-11 CARBON 10K 5% 1/4W

(US,CND)

R1228 1-247-880-11 CARBON 110K 5% 1/4W

(AEP,UK,EE)

R1228 1-249-441-11 CARBON 100K 5% 1/4W

(US,CND,MY,SP,JE,HK,AR,AUS)

POWER AMP

Les composants identifiés par une

marque ! sont critiques pour la

sécurité.

Ne les remplacer que par une

piéce portant le numéro spécifié.

The components identified by

mark ! or dotted line with mark

! are critical for safety.

Replace only with part number

specified.

– 113 –

ST TERMINAL TRANSSW

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

R1229 1-249-429-11 CARBON 10K 5% 1/4W

R1231 1-247-807-31 CARBON 100 5% 1/4W

R1232 1-249-429-11 CARBON 10K 5% 1/4W

R1233 1-249-429-11 CARBON 10K 5% 1/4W

!R1243 1-217-637-00 FUSIBLE 1 5% 1/4W F

R1251 1-249-417-11 CARBON 1K 5% 1/4W F

R1252 1-249-437-11 CARBON 47K 5% 1/4W

R1253 1-249-417-11 CARBON 1K 5% 1/4W F

R1254 1-249-437-11 CARBON 47K 5% 1/4W

R1255 1-260-103-11 CARBON 2.2K 5% 1/2W

R1257 1-260-103-11 CARBON 2.2K 5% 1/2W

!R1259 1-212-881-11 FUSIBLE 100 5% 1/4W F

!R1260 1-217-151-00 METAL 0.22 10% 2W

R1261 1-249-417-11 CARBON 1K 5% 1/4W F

R1262 1-249-431-11 CARBON 15K 5% 1/4W

R1268 1-249-397-11 CARBON 22 5% 1/4W F

R1269 1-249-397-11 CARBON 22 5% 1/4W F

R1271 1-249-431-11 CARBON 15K 5% 1/4W

R1272 1-249-431-11 CARBON 15K 5% 1/4W

R1273 1-249-413-11 CARBON 470 5% 1/4W F

< THERMISTOR(POSITIVE) >

THP1230 1-807-796-11 THERMISTOR

**************************************************************

*1-666-905-11 ST TERMINAL BOARD

*****************

< CONNECTOR >

CN744 1-568-834-11 SOCKET, CONNECTOR 15P

CN745 1-774-289-11 PIN, CONNECTOR (PC BOARD) 15P

**************************************************************

*1-667-719-11 SW BOARD

********

< CONNECTOR >

CN601 1-770-697-11 CONNECTOR, FFC/FPC 14P

CN602 1-778-638-21 PIN, CONNECTOR (PC BOARD) 2P

CN603 1-778-638-21 PIN, CONNECTOR (PC BOARD) 2P

< SWITCH >

S681 1-572-467-61 SWITCH, PUSH (1 KEY)(LIMIT IN)

S682 1-692-377-31 SWITCH, PUSH (1 KEY)(REFLECT)

S683 1-692-847-21 SWITCH, PUSH (1 KEY)(PROTECT)

S685 1-572-467-61 SWITCH, PUSH (1 KEY)(CHUCKING IN)

S686 1-762-621-21 SWITCH, PUSH (1 KEY)(PACK OUT)

S687 1-572-688-11 SWITCH, PUSH (1 KEY)(PB POSITION)

S688 1-762-621-21 SWITCH, PUSH (1 KEY)(REC POSITION)

**************************************************************

*1-666-904-11 TRANS BOARD

***********

< CONNECTOR >

CN1600 1-564-321-00 PIN, CONNECTOR 2P

*CN1601 1-564-518-11 PLUG, CONNECTOR 3P

CN1602 1-564-523-11 PLUG, CONNECTOR 8P

< FUSE >

!F1601 1-532-388-31 FUSE (T2AL/250V)(MY,SP,JE,HK,AR,AUS)

!F1603 1-532-504-31 FUSE (T4AL/250V)

(AEP,UK,EE,MY,SP,JE,HK,AR,AUS)

!F1603 1-533-419-11 FUSE, GLASS CYLINDRICAL (DIA.5)(4A/125V)

(US,CND)

!F1605 1-532-504-31 FUSE (T4AL/250V)

(AEP,UK,EE,MY,SP,JE,HK,AR,AUS)

!F1605 1-533-419-11 FUSE, GLASS CYLINDRICAL (DIA.5)(4A/125V)

(US,CND)

< FUSE HOLDER >

FH1601 1-533-293-11 FUSE HOLDER (MY,SP,JE,HK,AR,AUS)

FH1602 1-533-293-11 FUSE HOLDER (MY,SP,JE,HK,AR,AUS)

FH1603 1-533-293-11 FUSE HOLDER

FH1604 1-533-293-11 FUSE HOLDER

FH1605 1-533-293-11 FUSE HOLDER

FH1606 1-533-293-11 FUSE HOLDER

< RESISTOR >

!R1600 1-202-725-00 SOLID 3.3M 10% 1/2W

(US,CND)

< SWITCH >

!S1600 1-762-753-11 SWITCH, VOLTAGE SELECTION

(MY,SP,JE,HK,AR,AUS)

< TRANSFORMER >

!T1600 1-431-498-11 TRANSFORMER, POWER (MY,SP,JE,HK,AR,AUS)

!T1600 1-431-988-11 TRANSFORMER, POWER (AEP,UK,EE)

!T1600 1-431-989-11 TRANSFORMER, POWER (US,CND)

< THERMISTOR(POSITIVE) >

THP1600 1-801-696-11 THERMISTOR, POSITIVE

THP1601 1-801-696-11 THERMISTOR, POSITIVE

THP1602 1-801-671-11 THERMISTOR, POSITIVE

THP1603 1-801-671-11 THERMISTOR, POSITIVE

**************************************************************

MISCELLANEOUS

*************

10 1-782-793-11 WIRE (FLAT TYPE) (23 CORE)

52 1-782-990-11 WIRE (FLAT TYPE) (19 CORE)

56 1-782-991-11 WIRE (FLAT TYPE) (15 CORE)

62 1-233-544-21 ENCAPSULATED COMPONENT (US,CND)

62 1-233-546-21 ENCAPSULATED COMPONENT

(MY,SP,JE,HK,AR,AUS)

62 1-693-387-21 TUNER (FM/MW/LW)(AEP,UK,EE)

64 1-783-213-11 WIRE (FLAT TYPE) (15 CORE)

!68 1-569-008-21 ADAPTOR, CONVERSION 2P (MY,SP,JE)

!69 1-770-019-11 ADAPTOR, CONVERSION PLUG 3P (UK,EE,HK)

102 1-660-966-11 OP RELAY FLEXIBLE BOARD

103 1-782-683-11 WIRE (FLAT TYPE) (14 CORE)

110 1-783-113-11 WIRE (FLAT TYPE) (25 CORE)

POWER AMP

Les composants identifiés par une

marque ! sont critiques pour la

sécurité.

Ne les remplacer que par une

piéce portant le numéro spécifié.

The components identified by

mark ! or dotted line with mark

! are critical for safety.

Replace only with part number

specified.

– 114 –

HCD-MD333

Ref. No. Part No. Description Remark

Les composants identifiés par une

marque ! sont critiques pour la

sécurité.

Ne les remplacer que par une

piéce portant le numéro spécifié.

The components identified by

mark ! or dotted line with mark

! are critical for safety.

Replace only with part number

specified.

!167 8-583-028-02 OPTICAL PICK-UP KMS-260A/J1N (for MD)

!255 8-848-379-31 OPTICAL PICK-UP KSS-213B/K-N (for CD)

256 1-769-069-11 WIRE (FLAT TYPE) (16 CORE)

!CNP16011-696-847-11 CORD, POWER (AUS)

!CNP16011-769-744-11 CORD, POWER (AEP,UK,EE,MY,SP,JE,HK)

!CNP16011-783-532-11 CORD, POWER (US,CND)

!CNP16011-783-941-11 CORD, POWER (AR)

FAN901 1-698-997-11 FAN, D.C.

FL901 1-517-687-11 INDICATOR TUBE, FLUORESCENT

HR901 1-500-396-11 HEAD, OVER LIGHT (RF325-74A)

M101 X-4917-523-4 BASE (OUTSART) ASSY (SPINDLE)

M102 X-4917-504-1 MOTOR ASSY (SLED)

M901 A-4672-135-A MOTOR ASSY, SPINDLE

M902 A-4672-133-A MOTOR ASSY, SLED

M903 A-4672-134-A MOTOR ASSY, LOADING (MD)

M904 A-4608-362-A MOTOR (L) ASSY (LOADING) (CD)

!T1600 1-431-498-11 TRANSFORMER, POWER (MY,SP,JE,HK,AR,AUS)

!T1600 1-431-988-11 TRANSFORMER, POWER (AEP,UK,EE)

!T1600 1-431-989-11 TRANSFORMER, POWER (US,CND)

**************************************************************

*************

HARDWARE LIST

*************

#1 7-685-646-79 SCREW +BVTP 3X8 TYPE2 N-S

#2 7-685-647-79 SCREW +BVTP 3X10 TYPE2 N-S

#3 7-685-650-79 SCREW +BVTP 3X16 TYPE2 IT-3

#4 7-685-871-01 SCREW +BVTT 3X6 (S)

#5 7-685-850-04 SCREW +BVTT 2X3 (S)

#6 7-685-851-04 SCREW +BVTT 2X4 (S)

#7 7-627-553-17 PRECISION SCREW +P 2X2 TYPE 3

#8 7-627-552-27 SCREW,PRECISION +P 1.7X2

#9 7-624-105-04 STOP RING 2.3, TYPE -E

#10 7-685-234-19 SCREW +KTP 2.6X8 TYPE2NON-SLIT

#11 7-621-775-10 SCREW +B 2.6X4

#12 7-621-255-15 SCREW +P 2X3

#13 7-627-852-28 +P 1.7X3

SUPPLEMENT-1

File this supplement with the service manual.

SERVICE MANUAL

Subject: PARTS CHANGED

HCD-MD333

US Model

Canadian Model

AEP Model

UK Model

E Model

Australian Model

Tourist Model

Sony Corporation

Home Audio Division Company

9-922-935-81 99K09013-1D

Published by Quality Assurance Dept.

1999 . 11

ELECTRICAL PARTS LIST

*A-4414-821-A AUDIO BOARD, COMPLETE

**********************

(MY,SP,JE,HK,AR,AUS)

PARTS CHANGED

! : indicates changed portion

EXPLODED VIEWS

8-2. CHASSIS SECTION

*55 A-4417-130-A POWER AMP BOARD, COMPLETE

(MY,SP,JE,HK,AR,AUS)

*57 A-4414-823-A JACK BOARD, COMPLETE

(MY,SP,JE,HK,AR,AUS)

*59 4-414-849-61 PANEL, BACK (MY,SP,JE,HK,AR,AUS)

62 1-233-546-21 ENCAPSULATED COMPONENT

(MY,SP,JE,HK,AR,AUS)

*65 A-4417-128-A MAIN BOARD, COMPLETE

(MY,SP,JE,HK,AR,AUS)

*67 A-4414-821-A AUDIO BOARD, COMPLETE

(MY,SP,JE,HK,AR,AUS)

Page

Former New

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

EXPLODED VIEWS

8-2. CHASSIS SECTION

*55 A-4417-130-A POWER AMP BOARD, COMPLETE

(MY,SP,JE,HK,AR,AUS,KR)

*57 A-4414-823-A JACK BOARD, COMPLETE

(MY,SP,JE,HK,AR,AUS,KR)

*59 4-414-849-61 PANEL, BACK (MY,SP,JE,HK,AR,AUS,KR)

62 1-233-546-22 ENCAPSULATED COMPONENT

(MY,SP,JE,HK,AR,AUS,KR)

*65 A-4417-128-A MAIN BOARD, COMPLETE

(MY,SP,JE,HK,AR,AUS,KR)

*67 A-4414-821-A AUDIO BOARD, COMPLETE

(MY,SP,JE,HK,AR,AUS,KR)

0CNP1601 1-768-079-21 CORD, POWER (KR)

CNP1601

ELECTRICAL PARTS LIST

*A-4414-821-A AUDIO BOARD, COMPLETE

**********************

(MY,SP,JE,HK,AR,AUS,KR)

102

*A-4414-823-A JACK BOARD, COMPLETE

*********************

(MY,SP,JE,HK,AR,AUS)

107

*A-4414-823-A JACK BOARD, COMPLETE

*********************

(MY,SP,JE,HK,AR,AUS,KR)

< RESISTOR >

0R444 1-215-914-11 METAK OXIDE 330 5% 3W F

(US,CND,MY,SP,JE,HK,AR,AUS)

*A-4417-128-A MAIN BOARD, COMPLETE

*********************

(MY,SP,JE,HK,AR,AUS)

< RESISTOR >

0R444 1-215-914-11 METAK OXIDE 330 5% 3W F

(US,CND,MY,SP,JE,HK,AR,AUS,KR)

*A-4417-128-A MAIN BOARD, COMPLETE

*********************

(MY,SP,JE,HK,AR,AUS,KR)

108

1-666-904-11 TRANS BOARD

************

< FUSE >

0F1601 1-532-388-31 FUSE (T2AL/250V)

(MY,SP,JE,HK,AR,AUS,KR)

0F1603 1-532-504-31 FUSE (T4AL/250V)

(MY,SP,JE,HK,AR,AUS,KR)

0F1605 1-532-504-31 FUSE (T4AL/250V)

(MY,SP,JE,HK,AR,AUS,KR)

< FUSE HOLDER >

FH1601 1-533-293-11 FUSE HOLDER (MY,SP,JE,HK,AR,AUS,KR)

< SWITCH >

0S1600 1-762-753-11 SWITCH, VO;TAGE SELECTION

(MY,SP,JE,HK,AR,AUS,KR)

< TRANSFORMER >

0T1600 1-431-498-11 TRANSFORMER, POWER

(MY,SP,JE,HK,AR,AUS,KR)

ELECTRICAL PARTS LIST

*A-4417-130-A POWER AMP BOARD, COMPLETE

***************************

(MY,SP,JE,HK,AR,AUS.KR)

< RESISTOR >

R1227 1-247-854-11 CARBON 9.1K 5% 1/4W

(AEP,UK,EE,MY,SP,JE,HK,AR,AUS,KR)

R1228 1-249-441-11 CARBON 100K 5% 1/4W

(US,AND,MY,SP,JE,HK,AR,AUS,KR)

ELECTRICAL PARTS LIST

*A-4417-130-A POWER AMP BOARD, COMPLETE

***************************

(MY,SP,JE,HK,AR,AUS)

< RESISTOR >

R1227 1-247-854-11 CARBON 9.1K 5% 1/4W

(AEP,UK,EE,MY,SP,JE,HK,AR,AUS)

R1228 1-249-441-11 CARBON 100K 5% 1/4W

(US,AND,MY,SP,JE,HK,AR,AUS)

Page

112

Former New

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

113

1-666-904-11 TRANS BOARD

************

< FUSE >

0F1601 1-532-388-31 FUSE (T2AL/250V)

(MY,SP,JE,HK,AR,AUS)

0F1603 1-532-504-31 FUSE (T4AL/250V)

(MY,SP,JE,HK,AR,AUS)

0F1605 1-532-504-31 FUSE (T4AL/250V)

(MY,SP,JE,HK,AR,AUS)

< FUSE HOLDER >

FH1601 1-533-293-11 FUSE HOLDER (MY,SP,JE,HK,AR,AUS)

< SWITCH >

0S1600 1-762-753-11 SWITCH, VO;TAGE SELECTION

(MY,SP,JE,HK,AR,AUS)

< TRANSFORMER >

0T1600 1-431-498-11 TRANSFORMER, POWER

(MY,SP,JE,HK,AR,AUS)

HCD-MD333

REVISION HISTORY

Clicking the version allows you to jump to the revised page.

Also, clicking the version at the upper right on the revised page allows you to jump to the next revised

page.

Ver. Date Description of Revision

1.1 2001.06 Correction of exploded views.

1.0 1998.08 New

(SPM-01012)

1999.11 SUPPLEMENT-1

HCD MD333 Sony_HCD MD333_service_manual Sony Service Manual

Navigation menu

Versions of this User Manual:

Views

Navigation