S&S X Ray Products Catalog MV400 Sscat

User Manual: MV400

Open the PDF directly: View PDF .
Page Count: 79

Download
Open PDF In Browser	View PDF

S&S X-RAY PRODUCTS

INC

Motorized Viewers
Mammography Illuminators
X-Ray Accessories Supplies

S&S X-Ray Products Inc.
1101 Linwood Street
Brooklyn NY 11208
718-649-8500
800-347-XRAY
www.ssxray.com

w w w. s s x r a y. c o m

MAMMOGRAPHIC VERTICAL VIEWER
MV800
PROGRAMMABLE SHADES WITH INDIVIDUAL PANEL SPECIFIC MEMORY

Here is our top of the line mammography
motorized viewer, which features intuitive
use, no obstructing strings, and exceeds
all ACR requirements for mammography!
Four independent curtains can easily be individually positioned by the technologist when the
films are placed on the viewer (using the manual curtain controls or one of four programmable
curtain presets), and their position stored into
the frame-specific memory with the push of a
button. When the particular “frame” is accessed
by the radiologist, the shades will automatically go to the position previously set, providing
optimal frame-specific shading for all films on
the viewer. The unit is designed with the comfort
of the radiologist in mind, with extra leg room, a
large work desk and easily accessible utility outlets.
Variable intensity illumination is standard,
ranging from 100% down to 60% in increments
of 10%. This allows the radiologist to select the
proper level of illumination for a specific type of
film, change the intensity for other films, and
easily and precisely return to this original level.
High frequency energy efficient electronic ballasts provide for flicker-free, reduced eyestrain
viewing.
An optional variable intensity bright spot permits highlighting and focusing in on extra dense
areas of the film. It can be moved to any location
on the lower tier. The spotlight has been programmed to automatically find the non-shaded
area when turned on. The positioning joystick
can be used to move the spotlight to the precise
location desired.
The vertical transport belt features exceptionally quiet and smooth operation. The MV800 has 200 frames and can hold 800
20x30cm films (or 1200 18x24cm films). There are no strings to distract or obscure the viewing of films.
This viewer is ideal for sequential interpretation of film, and automatically centers the next set of films.The standard auto-indexing feature rapidly accesses a selected film (moving at a speed greater than one frame per second). Any film can be viewed in
the upper or lower tier position. Previous/Next buttons or the standard dual foot switch can be used to move the transport belt
and quickly center the adjacent films. Angulated viewing of 50 cuts glare.
To conserve energy, the units feature auto-shutoff when there is inactivity for 30 minutes. There is also the ability to program security codes into the machine to limit access to films loaded into the viewer.
MEMBRANE TOUCH PAD CONTROLS
LIGHT INTENSITY CONTROL

CURTAIN MEMORY
CURTAIN PRESETS

CURTAIN AUTO RETRACT

AUTOMATIC SHUT
OFF TIMER

71.187"

SPOT LIGHT INTENSITY
CONTROL

30.25"
28.37"
44.5"

57"

Dimensions
LED READOUT
(FRAME NUMBER IDENTIFICATION)

PANEL SELECTORS

PREVIOUS/NEXT BUTTON

POSITIONING JOY STICK
CURTAIN POSITIONING

Base: 2.5” Casters
Finish: Attractive durable baked on polyester, in light grey with blue sides. Shelf is finished in matching blue laminate with Oak bullnose trim.
Electrical: 118 volts, 60HZ AC, 1 phase, total amperage draw with all lights on and motor running-10 amps. For 220 volts, 50 HZ or other voltages, consult factory for details.
U
Approx. Weight: 840 Lbs.

A -1

MOTORIZED VIEWERS

S & S X-RAY PRODUCTS

INC.

8 0 0 / 3 4 7 - X R AY

MOTORIZED VIEWERS

VERTICAL
VIEWER MV220 / MV400
IDEAL FOR THE FULL SPECTRUM OF GENERAL RADIOLOGY

S & S X-RAY PRODUCTS

MV220 or MV400 - VERTICAL VIEWER
MV220C or MV400C - VIEWER W/ MOTORIZED CURTAINS
MV220S or MV400S - VIEWER W/ ROVING SPOTLIGHT
MV220CS or MV400CS - VIEWER W/CURTAINS AND SPOTLIGHT

INC.

8 0 0 / 3 4 7 - X R AY

w w w. s s x r a y. c o m

This versatile vertical belt automatic viewer is ideal for sequential interpretation of films. The viewers feature advanced microprocessor control technology, smooth and quiet operation, and film viewing without obstructing strings! The standard auto-indexing feature rapidly accesses a
selected frame (moving at a speed greater than one frame per second) and automatically centers the film in the proper viewing position.
Variable intensity illumination, ranging from 100% down to 60% in
increments of 10%, allows the radiologist to select the proper level of illumination for a specific type of film, change the intensity for other films,
and easily and precisely return to the original
level. High frequency energy efficient electronic
ballasts provide flicker free reduced eyestrain
viewing.

The combination of a microprocessor and a
coffee resistant membrane touch pad control insures years of trouble free use. The vertical transport belt features exceptionally
quiet operation, and is designed to prevent film
loss or damage while in the viewer. Angulated
viewing of 50 cuts glare. The belt can accommodate any size film up to 14”x17”. Mix or match your film sizes
with equal security of film retention. Films slide easily and
securely into narrow plastic grips on each frame. There are no
strings to distract or obscure the viewing of films. The durable plastic film grips minimize the space between the top and bottom tier for
ease of comparison.
Eight 14”x17” films can be viewed simultaneously. The units hold 220
or 400 14”x17” films (greater quantity with smaller films).

The C and CS models have full manual and programmable shutter capability allowing for proper collimation to any film format.
When films are loaded into the viewer, the shade locations can be
easily set manually (or through the use of one of four programmable
presets) and programmed into the frame-specific memory with the
touch of a button. The curtain memory can be easily individually set
for each frame on the machine, so that when the radiologist calls up
a specific frame, the curtains move automatically to their preset
location for that particular set of films (Manual movement of the curtains can easily be used to fine tune the curtain locations). Optional
customized belts are available and recommended (for C and CS models only) for mixing film formats, and in particular for mammographic films.
The customized belt enables the simultaneous display and full shading of 3 years of screening 18x24cm mammographic studies!
A joystick-controlled variable intensity moving bright spot can be quickly positioned anywhere on the lower tier to add the extra brightness needed to
read dense film. When the bright spot is activated it rapidly locates the non-shaded region on the viewing surface, then turns on. Care was taken in the
design of the control pad and in the programming of the unit so that all functions are intuitive to the user, and easily and quickly learned and assimilated.

To conserve energy, the units feature auto-shutoff when there is inactivity for 30 minutes. There is also the ability to program security codes into
the machine to limit access to films loaded into the viewer.
The C and CS models with fully programmable motorized shades (with frame specific memory in addition to programmable memory presets) easily exceed the proposed ACR requirements for mammography.
LIGHT INTENSITY CONTROL

CURTAIN MEMORY
CURTAIN PRESETS

CURTAIN AUTO RETRACT

AUTOMATIC SHUT OFF TIMER

MEMBRANE TOUCH PAD CONTROLS
SPOT LIGHT INTENSITY CONTROL

(Shown for the MV200CS/MV400CS)

LED READOUT (FRAME NUMBER IDENTIFICATION)
PANEL SELECTORS

PREVIOUS/NEXT BUTTONS

POSITIONING JOY STICK
CURTAIN POSITIONING

Lighting: MV220, MV220S, MV400, MV400S: 4 - 15 Watt Daylight fluorescent vertical bulbs per section. MV220C, MV220CS, MV400C, MV400CS 14 - 60
Watt Daylight fluorescent horizontal bulbs per viewer.

OPTIONS:

MV220-2 FOOT SWITCH - Hands free selection of frames (scan frames either forward or back).

MOTORIZED CURTAINS: FULL SHUTTER CAPABILITY Four curtains adjust independently for any opening size or location. Curtain memory can be set individually for automatic collimation of each frame.

78"

CUSTOMIZED BELTS: (C &CS models only) Design your belt to fit your needs - consult factory.
ROVING SPOTLIGHT: (Bottom Tier Only) Spotlight can be positioned anywhere on the lower tier with the touch of the joystick. Roving spotlight is programmed to coordinate with automatic collimation of shutters and will automatically move to the
open area when activated. To allow the bright spot to move, the standard internal dividers are removed.

30"
27.5"
43.5"

Base: 2.5” Swiveling Casters
Finish: Attractive durable baked on polyester, in light grey with blue sides. Shelf is finished in blue laminatewith Oak bullnose trim.
Electrical: 118 volts, 60HZ AC, 1 phase, total amperage draw with all lights on and motor running-10 amps.
Approx. Weight: MV220 - 1140 Lbs., MV400 - 1190 Lbs.

69.125"

Dimensions

UL
C

A-2

MV112A / MV112B

8 0 0 / 3 4 7 - X R AY

INC.

MOTORIZED VIEWERS

S & S X-RAY PRODUCTS

w w w. s s x r a y. c o m

The MV112 series are true random access motorized viewers. These are ideal for departments
where any study on the viewer may have to be
rapidly accessed at any time. Desired frames are
selected in pairs by lighted, numbered push buttons and are automatically brought into the viewing area in seconds. For closer study, at a touch
of a switch, the upper viewing panel is moved to
the lower viewing area and the illumination in the
upper section is automatically turned off.
The random access design of this unit allows
you to reach any frame in 12 seconds or less.
View 8 14”x17” films simultaneously. This unit
holds 112 14”x17” films on 28 durable plexiglas
panels (greater quantity with smaller films). Three
thin adjustable nylon cords hold small film securely in place without obstructing the view. Top and
bottom film grips secure 14”x17” films.
The controls are located on the central console.
There are 27 lighted push button panel selector
switches, 8 push button switches to control lighting in each viewing area, 3 viewing mode switches for illumination (on/off/individual), 2 Panel control switches, one master power switch, and 2 utility outlets.

MV112B - frames stored within the viewer

MV112A - Mobile magazine holding 28 frames can be preloaded
and easily rolled from viewer to the viewer. (Additional magazines are available, increasing the viewing capacity of the
MV112A)
MV112B - Fixed magazine of 28 viewing frames

MV112AM MOBILE MAGAZINE for the MV112A - collapsible handles and pivot wheels make it extremely easy to move
MV112A - with mobile magazine

Available Option: Hand Held Random Access Remote Control: (MV112RC) This solid state electronic remote control is ideal for
use in lectures, conferences and teaching sessions. This unique hand held unit allows the selecting and changing of frames while retaining
full freedom of movement for the operator and an unobstructed view of the subject films for the members of the viewing audience. Must be
factory installed.
Installed Dimensions

Shipping Dimensions (on shipping dollies)

79"

78"
30"

28 .75"

28"
45.625"

86"

72.5"

Base: Leveling legs
Finish: Attractive durable baked on polyester, in light grey with blue sides. Shelf is finished in white laminate./ Approvals : ETL
Electrical: 118 volts, 60HZ AC, 1 phase, total amperage draw with all lights on and motor running-10 amps. For 220 volts, 50 HZ or other voltages, consult factory for details.
Approx. Weight: MV112A - 1800 lbs.
MV112B - 1500 lbs.
A-3

MV216 / MV324 / MV1436
MOTORIZED VIEWERS

S & S X-RAY PRODUCTS

INC.

8 0 0 / 3 4 7 - X R AY

w w w. s s x r a y. c o m

The MV216, MV324 and MV1436 are our larger capacity
true random access motorized viewers.These viewers
are ideal for high volume applications, where short
access times to any film on the motorized viewer is
required.The random access feature minimizes the disruption of clinician consultations, with rapid nonsequential retrieval of any film on the viewer, and quick
return to the film being interpreted. Standard on these
viewers is automatic frame select (with push button
controls), Individual lighting per viewing section, and
durable plexiglas panels with film grips. Each panel features adjustable thin nylon cords hold film securely in
place without obstructing vision.

MV216 and MV324
Desired frames are selected by lighted, numbered push
buttons and are automatically brought into the viewing
area in seconds. For closer study, at a touch of a switch,
the upper viewing tier is moved to the lower viewing area
and the illumination in the upper section is automatically
turned off. The MV216 holds 216 14”x17” (27 frames per
unit), and displays eight 14”x17” films simultaneously.
The MV324 holds 324 14”x17” (27 frames per unit), and
displays twelve 14”x17” films simultaneously.

Controls (MV216 - MV324): Located on the central console are the
push button panel selector buttons, individual light control buttons, master power switch, viewing mode switches and 2 utility outlets.

The MV1436 is designed specifically for the viewing of 14”x36”
film. It holds 108 14”x36” (27 frames per unit) and displays four
14”x36” films simultaneously. The MV1436 has four divided
viewing areas with individually controlled lighting.

Available Option: Hand Held Random
Access Remote Control: (MV216RC, MV324RC
or MV1436RC) This solid state electronic remote
control is ideal for use in lectures, conferences and
teaching sessions. This unique hand held unit
allows the selecting and changing of frames while
retaining full freedom of movement for the operator
and an unobstructed view of the subject films for the
members of the viewing audience. Must be factory
installed.
Shipping Dimensions (on shipping dollies)

28 .75"

Controls (MV1436): Located on the central console are
27 push button panel selector buttons, 4 individual light
control buttons, master power switch and 2 utility outlets.

Installed Dimensions

82"

MV216 = 86"
MV1436 = 86"
MV324 = 114"

81"
37"
28"
45.625"

MV216 = 72.5"
MV1436 = 72.5"
MV324 = 100.5"

Base: Leveling legs
Finish: Attractive durable baked on polyester, in light grey with blue sides. Shelf is finished in white laminate./ Approvals : ETL
Electrical: 118 volts, 60HZ AC, 1 phase, total amperage draw with all lights on and motor running- 10 amps - MV216, MV1436; 13 amps - MV324.
For 220 volts, 50 HZ or other voltages, consult factory for details.
Approx. Weight: MV216 - 1600 lbs
MV324 - 1900 lbs.
MV1436 - 1500 lbs.
A-4

MINI MOBILE MOTORIZED VIEWERS

8 0 0 / 3 4 7 - X R AY

INC.

MV48 / MV72

w w w. s s x r a y. c o m

The MV48 and MV72 are designed for use in smaller
departments and offices which do not require higher
capacity viewers or where floor space is at a premium.
Mobile and spacesaving these random access viewers
reach any frame in 7 seconds or less. The MV48 has a
film capacity of 48 14”x17” (greater with smaller films) and
has 12 frames per unit. The MV72 has a film capacity of 72
14”x17” (greater with smaller films), and has 18 frames per
unit. Both motorized viewers display 8 14”x17” films
simultaneously. Desired frames are selected in pairs by
lighted, numbered push buttons and are automatically
brought into the viewing area in seconds. Both models
have individual lighting per viewing section, and durable
plexiglas panels with film grips. Adjustable thin nylon cords
hold films securely in place without obstructing vision).
The MV48 and MV72 can be easily moved from room to
room and plug into any standard electrical outlet. They
are frequently placed in ICU’s to provide on the spot review
of patient’s past and present films. No special installation is
required.
MV48 shown with optional folding shelf (MV48AC) Controls: Located on
the central console are the push button panel selector buttons, individual
light control switches, master power switch, and two utility outlets.

Available Options:
Hand Held Random Access Remote Control: (MV48RC
or MV72RC) This solid state electronic remote control is ideal
for use in lectures, conferences and teaching sessions. This
unique hand held unit allows the selecting and changing of
frames while retaining full freedom of movement for the operator and an unobstructed view of the subject films for the
members of the viewing audience. Must be factory installed.

Motorized Viewer Work Desk: (MV48AB or MC72AB) A handsome,
convenient and useful addition to a motorized viewer, this sturdy desk is
designed with a contoured formica top and divided storage sections for
film, records, etc. The desk is constructed of heavy gauge steel with a
1.25” thick white formica laminated top, edged in black vinyl. All steel
parts are finished with a durable baked on polyester, in light gray.

30"
MV48=68.5"
MV72=68.5"
MV810-170=63"

MV48=17.875"
MV72=20.125"

MV72 This removable laminated shelf comes as standard with this unit.
MV72
MV48
79"

30"
70"

30"

20.75" Ship. dimension w/out shelf
24.5" Ship. dimension with optional 48AC shelf
34"
Installed dimension with optional 48AC shelf

24"
34"

MV48 with MV48AB work table

Ship. dimension w/out shelf
Installed dimension with shelf

Base: 4” Ball Bearing Casters
Finish: Attractive durable baked on polyester, in light grey with blue sides. Shelf is finished in white laminate./ Approvals : ETL
Electrical: 118 volts, 60HZ AC, 1 phase, total amperage draw with all lights on and motor running - 10 amps. For 220 volts, 50 HZ or other voltages, consult factory for details.
Approx. Weight: MV48 - 850lbs.
MV72 - 900 lbs.
A-5

MOTORIZED VIEWERS

S & S X-RAY PRODUCTS

MV200QT / MV300QT
MOTORIZED VIEWERS

MV200QTT / MV300QTT (with bright spot)

S & S X-RAY PRODUCTS

INC.

8 0 0 / 3 4 7 - X R AY

w w w. s s x r a y. c o m

These viewers are our major upgrade to our MV200A, the viewer
which set the standard worldwide for reliability and durability! The
sequential access MV200QT and MV300QT are designed to maintain the tradition of being the proven workhorses of radiology
departments worldwide. They maintain the long-lasting heavy duty
design and construction of the MV200A but now incorporate microprocessor controls, brighter variable intensity illumination, new
unobtrusive membrane switches, and have been made quieter! The
advanced microprocessor controller and new DC motors provide
exceptionally smooth and precise frame transport, and the maximum
transport time to reach any frame on the machine has been reduced
by 15%! Push button frame selection using a membrane keypad is
standard as well as an up-down twin foot switch! Previous/Next buttons quickly center the adjacent films.
The MV200QT and MV300QT feature 50 durable plexiglass panels
which are transported sequentially around the viewer. These plexiglass panels have top and bottom film grips. The MV200QT holds 200
14”x17” films (50 frames per unit) and displays 8 14”x17” films simultaneously. The MV300QT holds 300 14”x17” films (50 frames per unit)
and displays 12 14”x17” films simultaneously. The panels utilize film
retention strings to keep the films securely in place.
High frequency, energy efficient electronic ballasts provide for
brighter, uniform flicker-free film illumination. Also standard is the
ability to dim these ballasts in increments of 10% from 100% down to 60% of maximum illumination to achieve the proper viewing
conditions for a specific type of film. Both the MV200QT and the MV 300QT also feature automatic shutoff when inactive after a
programmable time period to conserve energy! There is also the ability to program security codes into the machine to limit
access to films loaded into the viewer.
The MV 200TT and MV300TT include a joystick-controlled variable intensity moving bright spot. The bright spot can be positioned
anywhere on the viewing surface to provide high intensity illumination to interpret dense areas on radiographs. The moving bright
spot is 3.5” in diameter and uses a Halogen lamp in a focused, thermostatically protected lens housing. A dimmer control, built into
the switch console, controls lamp intensity. (The moving bright spot must be factory installed and cannot be added in the field. To
allow the spotlight to move between viewing areas, the standard internal dividers are removed. Although control of lamps in each
viewing section remains, light spillover between viewing areas may occur.)
MEMBRANE TOUCH PAD CONTROLS
LIGHTING CONTROLS FOR INDIVIDUAL VIEWING AREAS

LIGHT INTENSITY CONTROL

AUTOMATIC SHUT OFF TIMER

SPOT LIGHT INTENSITY CONTROL

LED READOUT
(FRAME NUMBER IDENTIFICATION)

POSITIONING JOY STICK
PANEL SELECTORS

PREVIOUS/NEXT
BUTTONS

Shipping Dimensions
(on shipping dollies)

MV200QT = 71.5"
MV300QT= 99.5"

MV200QT= 71.5"
MV300QT = 99.5"

93.562"
82"

30"

29"

28.562"
43.562"

MV200QT= 91"
MV300QT= 119"

Installed
Dimensions

14"

Base: Ball Bearing Casters
Finish: Attractive durable baked on polyester, in sliprock grey framed in off white. Shelf is black with oak trim.
Electrical: 118 volts, 60HZ AC, 1 phase, total amperage draw with all lights on and motor running - MV200QT: 12 amps., MV300QT 15 amps. For
220 volts, 50 HZ or other voltages, consult factory for details.
U
Approx. Weight: MV200QT - 1850 lbs.
MV300QT - 2200 lbs.

A-6

MV200A / MV300A

8 0 0 / 3 4 7 - X R AY

INC.

MOTORIZED VIEWERS

S & S X-RAY PRODUCTS

w w w. s s x r a y. c o m

The MV200A and the MV300A are the
viewers that set the standard worldwide for
reliability and durability! They are the
proven workhorses of radiology departments worldwide. Vertical movement, of
viewing panels, is controlled by an up-down
footswitch.
Two level illumination per divided 14”x17”
viewing section is controlled by three way
toggle switches located on the switch console. A master switch for each tier is also
supplied. Normal illumination is brighter
than most conventional viewers and additional illumination for darker films is available at a flip of a switch.
The MV200A and MV300A feature 50
durable plexiglass panels which are transported sequentially around the viewer.
These plexiglass panels have top and bottom film grips. The MV200A holds 200
14”x17” films (50 frames per unit) and displays 8 14”x17” films simultaneously. The
MV300A holds 300 14”x17” films (50 frames
per unit) and displays 12 14”x17” films
simultaneously. These motorized viewers
can reach any of the fifty panels in a maximum time of one minute or approximately
2.5 seconds per panel. The panels utilize
film retention strings to keep the films
securely in place.

MV200A with MV200T (Joystick controlled Moving Bright Spot)

Available Options:

Shipping Dimensions
(on shipping dollies)

Joystick-controlled variable intensity moving bright spot.: The
MV200T (for the MV200A) and the MV300T (for the MV300A) bright
spot can be positioned anywhere on the viewing surface to provide high
intensity illumination to interpret dense areas on radiographs. The moving bright spot is 3.5” in diameter and uses a Halogen lamp in a focused,
thermostatically protected lens housing. A dimmer control, built into the
switch console, controls lamp intensity. (The moving bright spot must be
factory installed and cannot be added in the field. To allow the spotlight
to move between viewing areas, the standard internal dividers are
removed. Although control of lamps in each viewing section remains,
light spillover between viewing areas may occur.)

MV200A 71.5”
MV200QT= 71.5"
MV300A 99.5”
MV300QT = 99.5"

82"

MV200QT= 91"
MV300QT= 119"

29"

MV200A
MV200QT =71.5”
71.5"
MV300A
MV300QT= 99.5”
99.5"

Automatic Controller: Model # MV200C is an automatic 50 push-button control system. At the push of a numbered button, the MV200C will
select the desired panel, move it in the fastest direction (forward or
reverse) to the proper viewing position where it will automatically stop.

93.562"

30"
28.562"
43.562"

Installed
Dimensions

14"

Base: Ball Bearing Casters
Finish: Attractive durable baked on polyester, in light grey with a wood grain formica shelf.
Electrical: 118 volts, 60HZ AC, 1 phase. Two 3 conductor grounded power connections in rear. Separate lines for motor and lamp circuits should
be provided to avoid lamp flicker. Motor: 1/2HP, 9 amps. Lighting: - MV200A: 10 amps., MV300A 15 amps. For 220 volts, 50 HZ or other voltages,
consult factory for details.
Approx. Weight: MV200A- 1850 lbs.
MV300A - 2200 lbs.

A-7

DIGITAL VIEWING STATION

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

DVS-CC with a 4000 22

DVS-2 with a 4000 24

DVS-4 with RADX single bank motorized viewer

DVS Corner Module: DVS-CC fills a corner space and mates with a DVS station on each side. The modular design allows tailoring
the Digital Viewing Station to suit available space and include all the features needed to maximize productivity.

The Digital Viewing Station (DVS) is designed to help your department convert to new digital formats while still main taining the presence of existing film technologies, and eliminates the need for custom carpentry. You can easily place all
the digital imaging devices in your current reading area on the DVS and cross reference film and digital images on one
work station. Designed to improve radiologist’s
viewing comfort and efficiency this functional workstation provides a large work surface with pull out
writing shelf, abundant legroom, easy access to two
additional power outlets on each side (for laptop,
dictation equipment or Bright Spot illuminator[see
pg. 16])while its small footprint efficiently utilizes
department floor space.
The adjustable top shelf is designed to hold up to a
6 bank illuminator (from the S&S 4000 Series), can
accommodate a RADX single bank tabletop motorized viewer or can be used for monitors and peripherals. The top shelf is fully adjustable vertically to
minimize the space between viewing surfaces.
The lower shelf is designed to hold computer monitors and peripherals at 00or 2 00 angulation, and is
fully adjustable vertically to ideally position the
lower monitors.
The bottom support holds computer hardware and
cabling. The optional hinged bottom front cover
(DVS-Bx) hides the computer hardware and cabling
without diminishing leg room.
The body of the Digital Viewing Station is constructed of cold rolled steel with a baked enamel finish. The work desk is covered with formica and has
an oak bullnose front for durability. The DVS
comes with adjustable leveling legs. Optional heavy
duty casters are available for mobility.

Model DVS-2 shown with optional casters

B-1

DIGITAL VIEWING STATION

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

DVS-2 with a 4000 24 four bank illuminator

MODEL#

DESCRIPTION

DVS-2
DVS-3
DVS-4
DVS-CC
DVS-Bx
DVS-C

Holds up to 2 monitors on the center shelf, and single to 4 bank illuminator on the top shelf
Holds up to 3 monitors on the center shelf, and single to 5 bank illuminator on the top shelf
Holds up to 4 monitors on the center shelf, and single to 6 bank illuminator on the top shelf
Corner Module holds 1 monitor on the center shelf, and a 1 or2 bank illuminator on the top shelf
Optional hinged bottom front cover for digital viewing station
Optional set of 4 heavy duty casters for digital viewing station

Recommended Illuminator Series :
MODEL#
DESCRIPTION
400021
400022
400024
400025
400026

D V S-2 57”
D V S-3 69”
D V S-4 93”

1 bank illuminator with autoswitches for DVS- CC
2 bank illuminator with autoswitches for DVS- CC
4 bank illuminator with autoswitches for DVS-2
5 bank illuminator with autoswitches for DVS-3
6 bank illuminator with autoswitches for DVS-4

DVS-CC CORNER MODULE

Shown with optional
casters. Reduce height
3” without casters

48.7”

58.5”
31.28”

D V S-2 61”
D V S-3 73”
D V S-4 97”

29.656”

DVS-Bx Optional hinged
cover (hides computer hardware and cabling)

46.4”

US Patent #5980004
B-2

C HAM E L E O N SERIES

8 0 0 / 3 4 7 - X R AY

B l e n d s W i t h A n y D éc o r

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

Four Bank Surface Mounted Model (101204)

The C h a m e l e o n Illuminator Series combines a slim, sleek appearance (33/8” depth),
with color-customizable trim. This cost efficient illuminator is designed to accentuate the
warm, professional appearance of your reading room or consultation area. The units can
be highlighted with trim in a choice of ten colors, polished stainless steel or primed strip (the
latter can be easily painted to color coordinate within a facility). Constructed of durable
steel with a white powder-coat finish, this series is available in 2 lamps, 3 lamps and 4
lamps per viewing area models.
Trigger start ballasts, separated viewing sections, centered cluster switches, one piece plexiglass fronts and continuous gravity film grips are standard with this series. A bottom ledge
film support coupled with the continuous film grip guarantees maximum freedom for
viewing small or large films. Each section is individually controlled by rocker switches
mounted at the bottom center of the illuminator. Master switches are provided on units of
three banks or more. The Chameleon Illuminator can also be incorporated into a corner
module.

Tr i m C o l o r s

S&S Blue

Sandstone
Beige

Sliprock
Grey

Target
Red

Buttercup
Yellow

Dusty
Rose

Agean
Blue

Caribbean
Teal

Winter
Spruce

Blue
Ridge

Finish: White Baked Enamel
Electrical: Viewers operate on 120 volt, 60 Hz. 2 Lamp Series: .47 amps per section, 3 Lamp series: .61 amps per section, 4 Lamp series: 1.0 amps
per section. Surface mounting models are supplied with a 6’ three conductor line cord (see diagram for wiring locations). Recessed models come with BX
connectors. For special voltages consult factory.
✶ Optional Items: Modular Mobile system (pg B-23), mobile stand, console arms, angulated viewing system (pg B-25) corner modules (pg B-24), hospital grade plugs (pg B-30).

B-3

C H A M E L E O N SERIES

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

101 SERIES
TWO LAMP

SURFACE MOUNTED MODELS
EXTERIOR DIM
WIDTH
H GT

VIEWING AREA

Single
Tw o
T hree
Four
Five
Six

Bank 14”x17”
Bank 28”x17”
Bank 42”x17”
Bank 56”x17”
Bank 70”x17”
Bank 84”x17”

APPROX

STAN DARD

101 SERIES

THREE LAMP

101 SERIES
FOUR LAMP

STANDAR D
AUTO
AUTO
AUTO
STANDARD
SHIP WT SWITCHES SWITCHES SWITCHES SWITCHES SWITCHES SWITCHES

14”
28”
42”
56”
70”
84”

21”
21”
21”
21”
21”
21”

23 lbs
46 lbs
69 lbs
90 lbs
113 lbs
136 lbs

101201
101202
101203
101204
101205
101206

101221
101222
101223
101224
101225
101226

101301
1013 0 2
1013 0 3
1013 0 4
1013 05
1013 0 6

101321
101322
101323
101324
101325
101326

101401
101402
101403
101404
101405
101406

101421
101422
101423
101424
101425
101426

14”
28”
42”
56”
70”
84”

42”
42”
42”
42”
42”
42”

46 lbs
92 lbs
138 lbs
180 lbs
226 lbs
272 lbs

101211
101212
101213
101214
101215
101216

1012 31
1012 32
1012 3 3
1012 3 4
1012 35
1012 36

101311
101312
101313
101314
101315
101316

101331
101332
101333
101334
101335
101336

101411
101412
101413
101414
101415
101416

101431
101432
101433
101434
101435
101436

TWO TIER

1 over 1
2 over 2
3 over 3
4 over 4
5 over 5
6 over 6

2x
2x
2x
2x
2x
2x

14”x17”
28”x17”
42”x17”
56”x17”
70”x17”
84”x17”

SIDE VIEW
CONSOLE
MOUNTING

SIDE VIEW
RIGHT SIDE

101 SERIES

RECESSED MODELS
EXTERIOR DIM

VIEWING AREA

Single
Tw o
Th r e e
Four
Five
Six

Bank
Bank
Bank
Bank
Bank
Bank

101 SERIES

TWO LAM P

THREE LAMP

101 SERIES
FOUR LAMP

WALL OPENING APPROX STANDARD
STANDARD
AUTO
AUTO
STANDARD
AUTO
WIDTH HGT SHIP WT SWITCHES SWITCHES SWITCHES SWITCHES SWITCHES SWITCHES

WIDTH

HGT

14”x17”
28”x17”
42”x17”
56”x17”
70”x17”
84”x17”

14”
28”
42”
56”
70”
84”

21”
21”
21”
21”
21”
21”

14.25”
28.25”
42.25”
56.25”
70.25”
84.25”

21.25”
21.25”
21.25”
21.25”
21.25”
21.25”

23 lbs
46 lbs
69 lbs
90 lbs
113 lbs
136 lbs

101241
101242
101243
101244
101245
10124 6

101261
101262
10126 3
10126 4
101265
101266

1013 41
1013 42
1013 43
1013 44
1013 45
1013 4 6

101361
101362
10136 3
10136 4
101365
101366

101441
101442
101443
101444
101445
10144 6

1014 61
1014 62
1014 6 3
1014 6 4
1014 65
1014 66

14”x17”
28”x17”
42”x17”
56”x17”
70”x17”
84”x17”

14”
28”
42”
56”
70”
84”

42”
42”
42”
42”
42”
42”

14.25”
28.25”
42.25”
56.25”
70.25”
84.25”

42.25”
42.25”
42.25”
42.25”
42.25”
42.25”

46 lbs
92 lbs
138 lbs
180 lbs
226 lbs
272 lbs

1012 51
1012 52
1012 53
1012 54
1012 55
1012 56

101271
101272
101273
101274
101275
101276

101351
101352
101353
101354
101355
101356

101371
101372
101373
101374
101375
101376

101451
101452
101453
101454
101455
101456

1014 71
1014 72
1014 73
1014 74
1014 75
1014 76

TWO TI ER

1 over 1
2 over 2
3 over 3
4 over 4
5 over 5
6 over 6

2x
2x
2x
2x
2x
2x

#10 X 1.5” SELF TAPPIN G SCREWS
SPACED AS
SHOWN INTO
RECESSED WALL
PLATE WITH 1/16”
BETWE EN HEAD
AND WALL.
INSTALL SCREWS
IN KEYHOLES
PROVIDED.

PREFERRED
LOCATION FOR
OPTIONAL
JUNCTION BOX.
PIGTAILS FRO M
REAR OF ILLU MINATOR ARE
PROVIDED ON
REQUEST.

1/2” CONDUIT C ONTAINING 3 NO. 14 WIRES TO 120
VOLT 60 HZ S ERVICE. .

ALL M EASUREMENTS ARE ± 1/16”

FASTEN TO WALL THRU
HOLES IN FLANGE

1.5” FLANGE
(WHITE BAKE D ENAMEL)

B-4

148004 / 149004

8 0 0 / 3 4 7 - X R AY

PRECISION MAMMOGRAPHY SERIES

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

Here is the illuminator built to meet the demands of the discrimi nating radiologist! Four individually controlled counterbalanced curtains per tier (on the top, bottom, left and right sides
of the viewing screen) allow the user to collimate down to the
exact size opening needed to block out excess light (curtains can
close completely!) , and optimize the radiologist’s ability to discern
minimal changes in density on the mammographic study. This
series exceeds ACR requirements. Special high output electronic ballasts and four fluorescent bulbs per section give an
extremely bright and flicker-free illuminated surface. Lighting is
individually controlled per viewing section. The 148004 series has
a viewing area of 96x30cm per tier (view 4 - 24x30cm or 618x24cm films), the 149004 series has a viewing area of 56”x17”
per tier (view 6 - 24x30cm, 8 - 18x24cm or 4 - 14”x17” films).
Film grips are provided on the top and bottom of the viewing area for
optimum film handling. The compact design of this illuminator requires a
minimum amount of wall space. Easy access to the inside of the front of
the illuminator allows for fast lamp changes.

To enhance this series further a number of options are offered (see
below). These options, such as Two Level (normal and high)
Illumination (high is the standard illumination on these viewers Standard (high) lighting in the 149004 series may be too bright for normal
chest radiographs.), Optional Configuration of the horizontal curtain
control (for the 149014 only)*, Console Arms and Angulated Viewing
System must be specified at time of order. They need to be factory
installed and cannot be added at a later date.
Two Tier (148014) shown on Modular mobile System (with 168004 - formica top; two
168010 - bases with vertical partitions and 168039 - mounting arms-adj. 0 0 to 350)

SURFACE MODELS
DEPTH OF VIEWER - 4.875
VIEWING AREA
(MAXIMUM FILM CONFIGURATION)

* On the 149014, the standard configuration has slide control knobs for
the top bank on the top of the top bank. When wall mounted, these top
knobs may be as high as 78” (6.5’) from the floor, which is too high for the
altitude-challenged professional. For this purpose, we recommend the
optional configuration (which does increase the spacing between top and
bottom films by 4”) - see diagram below.

EXTERIOR DIM APPROX. CATALOG
WIDTH HGT
SHIP WT
NO.

(4x)24x30cm or (5x)18x24cm
46.125” 18.5” 100 lbs
(4x)14”x17”or (5x)24x30cm or (7x)18x24cm 64.312” 24.328” 165 lbs

148004
149004

TWO TIER

(8x)24x30cm or (10x)18x24cm
46.125” 37.125” 180 lbs
(8x)14”x17”or (10x)24x30cm or (14x)18x24cm 64.312” 48.75” 320 lbs

14 8 014
149014

148004 Series 46.13”
149004 Series 64.31”
148004 Series
18.5”
149004 Series
24.33”

148004 Series
37.13”
149004 Series
48.75”

STANDARD
CONFIGURATION

SEMI-RECESSED MODELS
MAXIMUM RECESS - 2.5” IN WALL
V I EW I N G A R E A
( MAXIMUM FILM CONFIGURATION)

EXTERIOR DIM WALL OPENING APPROX. CATALOG
NO.
WIDTH HGT
WIDTH HGT
SHIP WT

(4x)24x30cm or (5x)18x24cm
46.125” 18.5” 46.375” 18.75” 100 lbs
(4x)14”x17”or (5x)24x30cmor (7x)18x24cm 64.312” 24.328” 64.562” 24.578” 165 lbs

148044
149044

TWO TIER

OPTIONAL
CONFIGURATION

for 14 9014 onl y

(8x)24x30cm or (10x)18x24cm
46.125” 37.125” 46.375” 37.375
(8x)14”x17”or (10x)24x30cm or (14x)18x24cm 64.312” 48.75” 64.562” 49”

180 lbs
320 lbs

148054
149054

For mammography viewers without shades see page B-21.
ALL MEA SUREMENTS A RE ± 1/16”

Finish: White baked enamel (on cold rolled steel).
Electrical: Viewers operate on 120 volt, 60 Hz; Amps AC per viewing area: 148004 S ERIES - .57 149004 S ERIES - .65. Surface mounting models are supplied
with a 6’ three conductor line cord (see diagram for wiring locations). Semi-recessed models come with BX connectors. For special voltages consult factory.
✶ Optional Items: Modular Mobile System (pg B-23), Angulated viewing system (pg B-25), hospital grade plugs, console arms, 68H custom formica shelf & 68HB
wall mounting bracket (pg B-30). When ordering Two Level Illumination, place “HL” after the catalog number of the model chosen.

B-5

149005/149055

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS

PRECISION MAMMOGRAPHY

w w w . s s x ra y. c o m

This quality illuminator is designed for the ease of comparison of
sequential mammographic studies. Extraneous light is quickly
and accurately collimated out using our unique, counterbalanced
manual shades (which can close completely). High output, energy
efficient, electronic ballasts minimize noise and eliminate the
need for annoying fans. Nine F40/D865 daylight fluorescent
bulbs and variable intensity lighting, ranging from 100% down to
60% in increments of 10%, allow the radiologist to select an optimal
level of illumination for a specific type of film, change the intensity for other films, and easily and precisely return to this original level. The combination of four independently operated
shades for precise collimation with minimal penumbra, and
extremely bright and uniform variable intensity illumination,
maximize the radiologists ability to uncover important subtle
changes on mammograms. This illuminator exceeds ACR
requirements.
The unique design of this illuminator also allows its customization for different format films. Four film grips, with an
adjustable center film grip, permit customized film placement on
the uniformly illuminated surface. Adjustment of this center
film grip allows the viewing of up to eight 24x30cm or twelve
18x24cm films with no extraneous light to hinder reading. By
repositioning the center film grip three 14”x17” films can be read.
For mammography viewers without shades see page B-21.
Consult factory for other configurations.

Configured for viewing 24x30cm film. Shown on Modular mobile System (with 168004
- formica top; 168011- base with pull out shelf; 168010 - base with vertical partitions
and 168040 - mounting arms)

Configured for viewing 14”x17” film

SURFACE MODEL
DEPTH OF VIEWER - 4.875
VIEWING AREA
(MAXIMUM FILM CONFIGURATION)

EXTERIOR DIM APPROX. CATALOG
WIDTH HGT
SHIP WT
NO.

(3x)14”x17”or (8x)24x30cm or (12x)18x24cm 53.843” 31.812” 180 lbs

149005

SEMI-RECESSED MODELS
MAXIMUM RECESS - 2.5” IN WALL
VIEWING AREA
(MAXIMUM FILM CONFIGURATION)
A LL M EASUREMENTS ARE ± 1/16”

EXTERIOR DIM WALL OPENING APPROX. CATALOG
NO.
WIDTH HGT WIDTH HGT
SHIP WT

(3x)14”x17”or (8x)24x30cm or (12x)18x24cm 53.843” 31.812” 54.093” 32.062” 182 lbs

149055

Finish: White baked enamel (on cold rolled steel). /
Electrical: Viewers operate on 120 volt, 60 Hz; 2.7 Amps AC. Surface mount models are supplied with a 6’ three conductor line cord (see diagram for
wiring locations). Recessed models come with BX connectors. For special voltages consult factory.
✶ Optional Items: Modular Mobile System (pg B-23), hospital grade plugs, 68H custom formica shelf & 68HB wall mounting bracket (pg B-30).

B-6

149006

8 0 0 / 3 4 7 - X R AY

PRECISION MAMMOGRAPHY

INC .

S & S X-RAY PRODUCTS
w w w .ssxr ay .com

Four independent manual curtains (Counterbalanced for
ease of movement)
Variable intensity, extra bright illumination
Flicker-Free high output electronic ballasts for eye comfort
Gravity film grips
Available in surface or semi-recessed models
Energy efficient
No noisy fans required
Generates minimal heat
Meets ACR requirements

Two Tier (149016) shown on Modular mobile System (with 168005 - formica top;
two 168010 - bases with vertical partitions and 168039 - mounting arms-adj. 00 to
350)

148000 68.5”
Series:46.13"
149000 Series:64.31"

SURFACE MODELS
148000
149006Series:
and
18.5"
149046
149000 Series:
19.156”
24.33"

DEPTH OF VIEWER - 4.875
VIEWING AREA
(MAXIMUM

FILM CONFIGURATION)

(6x)24x30cm or (8x)18x24cm
TWO TIER

(12x)24x30cm

EXTERIOR DIM APPROX. CATALOG
WIDTH HGT
SHIP WT
NO.

(16x)18x24cm

68.5” 19.156” 140 lbs

149006

68.5”

149016

38.5” 240 lbs

4.875"

148000 Series:
149016
and
37.13"
149056
149000
Series:
48.75"
38.5”

SEMI-RECESSED MODELS

SEMI-RECESSED MOUNTING

MAXIMUM RECESS - 2.5” IN WALL
V I EW I N G A R E A
(MAXIMUM FILM CONFIGURATION)

(6x)24x30cm

1" WIDE CIRCUMFERENTIAL
STAINLESS STEEL FLANGE
FASTENS TO WALL

EXTERIOR DIM WALL OPENING APPROX. CATALOG
NO.
WIDTH
HGT
WIDTH HGT
SHIP WT

(8x)18x24cm

68.5” 19.156” 68.75” 19.4”

140 lbs

149046

(16x)18x24cm

68.5”

240 lbs

149056

MAXIMUM RECESS: 2.5"

TWO TIER

TWO TIER
(12x)24x30cm

38.5” 68.75” 38.75

ALTERNATE LOCATION FOR
POWER WITH BOTTOM FEED

ALL M EASUREMENTS ARE ± 1/16”

BOTTOM VIEW

5.25”
4.687"

5.25”
4.687"
3"
148000 Ser.
13.5"
149000 Ser.
17.13"

REAR VIEW WITH CONSOLE
MOUNTING ARMS

3.75”
3.25"

5.25”
3.25"
KEYHOLES FOR WALL
MOUNTING

148000 Ser.
24"
149000 Ser.
31.25"
148000 Ser.
34.5"
149000 Ser.
45.36"

SIDE VIEW CONSOLE MOUNTED

3.75”
3.25"

148000 Series:
36.5"
37.78”
149000 Series:
47.06"

3.25"
2.625”
REAR VIEW TWO TIER

3.25"
2.625”

KEYHOLES FOR WALL
MOUNTING

.875"

3.25"
5.25”

148000 Series:
37.59"
38.9”
149000 Series:
48.88"

*OPTIONAL
3/4" KO
(1 OR 2 TIER)

* PREFERRED LOCATION FOR OPTIONAL JUNCTION
BOX. PIGTAILS FROM REAR OF ILLUMINATOR ARE
PROVIDED ON REQUEST.

16.94”
148000 Series:16.38"
149000 Series:19.84"
35 DEGREE

12.44”
148000
Series:12.21"
149000 Series:14.2"
20 DEGREE

Finish: White baked enamel (on cold rolled steel).
Electrical: Viewers operate on 120 volt, 60 Hz; 1.6 Amps AC. Surface mount models are supplied with a 6’ three conductor line cord (see diagram for
wiring locations). Recessed models come with BX connectors. For special voltages consult factory.
✶ Optional Items: Modular Mobile System, console arms, angulated viewing system, 68H custom formica shelf & 68HB wall mounting bracket, hospital
grade plugs

S & S X-Ray Products, Inc.
718-649-8500

1101 Linwood Street Brooklyn, NY 11208
Fax: 718-257-0219
Toll Free: 800-347-XRAY

MAM MOGRAPHY

Our latest addition to the Precision Mammography series of illuminators
is designed for the simultaneous viewing of 6 24 x 30 cm mammography
films in a single tier unit (or 6 over 6 in a double tier unit). Extraneous
light is collimated with 4 independent, individually counterbalanced
shades. The unit features variable intensity illumination, ranging from
100% down to 60% in increments of 10%. This quantum setup allows
the radiologist to select an optimal level of illumination for a specific film
technique, change the intensity to view other films, and easily and precisely return to the previous level of illumination. It easily exceeds the
ACR requirements for light output.

2000 / 3000 / 4000 SERIES
SURFACE OR RECESSED

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w. s s x ra y. c o m

The 2000/3000/4000/ Series
Illuminators incorporate the
most popular illuminator fea tures, and maintain our high
quality standards. Trigger start
ballasts, internal dividers,
centered cluster switches, one
piece plexiglass fronts and
continuous stainless steel
gravity grips are supplied as
standard with these illuminators. The special design of the
2000/3000/4000 series minimizes the space between the
bottom of the viewing area
and the bottom of the illuminator, leaving room underneath the illuminator for the
ever present stack of x-ray
studies.
The 4000
Illuminator
Series provides exceptionally bright lighting with four
F15T8/D 15 watt daylight fluorescent tubes per 14”x17”
viewing area.
The 3000 Illuminator Series has three F15T8/D 15 watt daylight fluorescent tubes per 14”x17” viewing area.
The 2000 Illuminator Series has two F15T8/D 15 watt daylight fluorescent tubes per 14”x17” viewing area.
A bottom ledge film support coupled with the continuous stainless steel gravity grip guarantees maximum freedom for viewing small
or large films. Each section is individually controlled by rocker switches mounted at the bottom center of the illuminator. Master switches
are provided on units of three banks or more.
The illuminator is fabricated of steel with unibody construction and is designed to eliminate light leakage from seams and edges. Recessed
models have welded recessing flanges and BX connector. Optional stainless steel recessing flanges are available upon request at the time
of order.
DESK OR S URFACE MOUNTED MODELS

2000 S ERIES

DEPTH OF VIEWE RS: 4”
VIEWING AREA

Single
Tw o
T hree
Four
Five
Six

TWO LAMP

3000 SERIES
THREE LAMP

4000 SERIES
FOUR LAMP

EXTERIOR DIM APPROX. STANDARD
STANDARD
AUTO
AUTO
STAN DARD
AUTO
WIDTH
HGT SHIP WT SWITCHES SWITCHES SWITCHES SWITCHES SWITCHES SWITCHES

Bank 14”x17” 14.75” 19.156” 23lbs
Bank 28”x17” 28.75” 19.156” 39lbs
Bank 42”x17” 42.75” 19.156” 50lbs
Bank 56”x17” 56.75” 19.156” 70lbs
Bank 70”x17” 70.75” 19.156” 98lbs
Bank 84”x17” 84.75” 19.156” 115lbs

200001
200002
200003
200004
200005
200006

200021
200022
200023
200024
200025
200026

300001
300002
300003
300004
300005
300006

300021
300022
300023
300024
300025
300026

400001
400002
400003
400004
400005
400006

400021
400022
400023
400024
400025
400026

200011
200012
200013
200014
200015
200016

2 0 0 0 31
2 0 0 0 32
2 0 0 0 33
2 0 0 0 34
2 0 0 0 35
2 0 0 0 36

300011
300012
300013
300014
300015
300016

300031
300032
300033
300034
300035
300036

400011
400012
400013
400014
400015
400016

400031
400032
400033
400034
400035
400036

TWO TIER

1 over 1
2 over 2
3 over 3
4 over 4
5 over 5
6 over 6

2x
2x
2x
2x
2x
2x

14”x17”
28”x17”
42”x17”
56”x17”
70”x17”
84”x17”

14.75”
28.75”
42.75”
56.75”
70.75”
84.75”

38.312”
38.312”
38.312”
38.312”
38.312”
38.312”

60lbs
100lbs
130lbs
180lbs
230lbs
290lbs

A LL M EASUREMENTS ARE ± 1/16”

B-7

2000 / 3000 / 4000 SERIES

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

Surface mount: 400014 - Shown with
140272 Console Arms on custom made
shelf and brackets.

Surface mount: 200014 - Shown with 140103
Mobile Stand, 140110 pull-out shelf, 140111 shal low drawer, 140112 hinged recorder shelf, 188SM
side mounted Bright Spot, and 140279 Angulated
Viewing System

2000 SERIES
TWO LAM P

RECESSED MODELS
VIEWING AREA

Single
Tw o
Th r e e
Four
Five
Six

Bank
Bank
Bank
Bank
Bank
Bank

3000 SERIES
THREE LAMP

4000 SERIES
FOUR LAMP

EXTERIOR DIM WALL OPENING APPROX STANDARD
STANDARD
AUTO
AUTO
STANDARD
AUTO
WIDTH HGT
WIDTH HGT SHIP WT SWITCHES SWITCHES SWITCHES SWITCHES SWITCHES SWITCHES

14”x17”
28”x17”
42”x17”
56”x17”
70”x17”
84”x17”

14.75”
28.75”
42.75”
56.75”
70.75”
84.75”

19.156”
19.156”
19.156”
19.156”
19.156”
19.156”

15.25”
29.25”
43.25”
57.25”
71.25”
85.25”

19.656”
19.656”
19.656”
19.656”
19.656”
19.656”

23lbs
39lbs
50lbs
70lbs
98lbs
115lbs

200041
200042
200043
200044
200045
200046

200061
200062
200063
200064
200065
200066

300041
300042
300043
300044
300045
300046

300061
300062
300063
300064
300065
300066

400041
400042
400043
400044
400045
400046

400061
400062
400063
400064
400065
400066

14”x17”
28”x17”
42”x17”
56”x17”
70”x17”
84”x17”

14.75”
28.75”
42.75”
56.75”
70.75”
84.75”

38.312”
38.312”
38.312”
38.312”
38.312”
38.312”

15.25”
29.25”
43.25”
57.25”
71.25”
85.25”

38.812”
38.812”
38.812”
38.812”
38.812”
38.812”

60lbs
100lbs
130lbs
180lbs
230lbs
290lbs

200051
200052
200053
200054
200055
200056

2 0 0 071
2 0 0 072
2 0 0 073
2 0 0 074
2 0 0 075
2 0 0 076

300051
300052
300053
300054
300055
300056

300071
300072
300073
300074
300075
300076

400051
400052
400053
400054
400055
400056

400071
400072
400073
400074
400075
400076

TWO TIER

1 over 1
2 over 2
3 over 3
4 over 4
5 over 5
6 over 6

2x
2x
2x
2x
2x
2x

ALL M EASUREMENTS ARE ± 1/16”

Finish: White Baked Enamel, Stainless Steel Trim (welded on recessing flanges are white baked enamel)
Electrical: Viewers operate on 120 volt, 60 Hz. 2000 Series: .47 amps per section, 3000 series: .61 amps per section, 4000 series: 1.0 amps per section.
Surface mounting models are supplied with a 6’ three conductor line cord (see diagram for wiring locations). Recessed models come with BX connectors.
For special voltages consult factory.
✶ Optional Items: Modular Mobile system (pg B-23), mobile stand, console arms, angulated viewing system (pg B-25) corner modules (pg B-24), hospital
grade plugs (pg B-30).

B-8

2X SERIES / 4X HI - LOW

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w. s s x ra y. c o m

The 2X Series and the 4X Hi-Low Series Illuminators
are our top of the line illuminators. Their classic look is
matched with superior light distribution. Available
for surface or recessed mounting in sizes from one to
six banks wide and one or two tiers high, they can be
combined with our Modular Mobile System, Mobile
Stand, Console Arms, Angulated Viewing System, or
Corner Modules to form a state of the art viewing station.
Low leakage instant on ballasts, internal dividers (to prevent light “spill over”), centered cluster switches, option al film activated switches, one piece plexiglass fronts and
continuous stainless steel gravity film grips are supplied as
standard with this series. A master on/off switch is also
supplied for each tier of three or more banks.
Each tier of the illuminator is of one piece heavy duty
steel construction. Professionally welded and ground
seams on this viewbox provide exceptional rigidity and
strength. Distracting light leakage has been eliminated.

Desk or Surface Mount

Recessed models come complete with recessing flanges (in white baked enamel) permanently welded to the case. Holes are provided in
the flange for ease of mounting.
The 4X Hi-Low Illuminator Series has a unique four tube dual brightness system which provides two levels of light intensity. Each 14”x17”
viewing area has four F15T8/D fluorescent tubes, two low leakage thermally protected ballasts and specially designed reflectors. On the low
setting light distribution is far superior to conventional two tube viewers. When additional illumination is required a touch of a switch
increases the light output of the four lamps to their maximum brightness. Each viewing section is controlled by an on/off rocker switch
and a Hi-Lo brightness selector switch. A master on/off switch is also supplied for each tier of three or more banks. All Switches are
grouped together and mounted in the center of the front panel on the bottom tier.

DESK OR SURFACE MOUNTED MODELS
2X SERIES
TWO LAMP

DEPTH OF VIEWE RS: 3.75”
VIEWING AREA

Single
Tw o
T hree
Four
Five
Six

EXTERIOR D IM
WIDTH
HGT

Bank 14”x17” 14.75”
Bank 28”x17” 28.75”
Bank 42”x17” 42.75”
Bank 56”x17” 56.75”
Bank 70”x17” 70.75”
Bank 84”x17” 84.75”

21.5”
21.5”
21.5”
21.5”
21.5”
21.5”

4X SERIES
FOUR LAMP

STAN DARD
AUTO
AUTO
APPROX. STANDARD
SHIP WT SWITCHES SWITCHES SWITCHES SWITCHES

30lbs
60lbs
90lbs
120lbs
150lbs
160lbs

2X0041
2X0042
2X0043
2X0044
2X0045
2X0046

2X0001
2X0002
2X0003
2X0004
2X0005
2X0006

4X0041
4X0042
4X0043
4X0044
4X0045
4X0046

4X0001
4X0002
4X0003
4X0004
4X0005
4X0006

43” 60lbs
43” 120lbs
43” 180lbs
43” 240lbs
43” 300lbs
43” 360lbs

2X0051
2X0052
2X0053
2X0054
2X0055
2X0056

2 X 0 011
2X0012
2X0013
2X0014
2X0015
2X0016

4X0051
4X0052
4X0053
4X0054
4X0055
4X0056

4X0011
4X0012
4X0013
4X0014
4X0015
4X0016

TWO TI ER

1 over 1
2 over 2
3 over 3
4 over 4
5 over 5
6 over 6

2x
2x
2x
2x
2x
2x

14”x17”
28”x17”
42”x17”
56”x17”
70”x17”
84”x17”

14.75”
28.75”
42.75”
56.75”
70.75”
84.75”

ALL MEASUREMENTS ARE ± 1/16”

B-9

2X SERIES / 4X HI - LOW

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

The 2X Illuminator Series provides bright uniform lighting with two F15T8/D fluorescent tubes in
each 14”x17” viewing area, and specially designed
reflectors. Low leakage thermally protected ballasts
provide instant flicker free starting. Each viewing
area is controlled by an on/off rocker switch. A master on/off switch is also supplied for each tier of 3 or
more banks and all switches are grouped together
and mounted in the center of the front panel on the
bottom tier.

Recessed Mount: 4X0034

RECESSED MODELS

2X SERIES
TWO LAMP

DEPTH OF VIEWE RS: 3.75”
EXTERIOR DIM
WIDTH HGT

VIEWING AREA

Single
Tw o
T hree
Four
Five
Six

Bank 14”x17” 14.75” 21.5”
Bank 28”x17” 28.75” 21.5”
Bank 42”x17” 42.75” 21.5”
Bank 56”x17” 56.75” 21.5”
Bank 70”x17” 70.75” 21.5”
Bank 84”x17” 84.75” 21.5”

WALL
OPENING

4X SERIES
FOUR LAMP

APPROX. STANDAR D
STAN DARD
AUTO
AUTO
SHIP WT SWITCHES SWITCHES SWITCHES SWITCHES

15”X21.75” 30lbs
29”X21.75” 60lbs
43”X21.75” 90lbs
57”X21.75” 120lbs
71”X21.75” 150lbs
85”X21.75” 160lbs

2X0061
2X0062
2X0063
2X0064
2X0065
2X0066

2X0021
2X0022
2X0023
2X0024
2X0025
2X0026

4X0061
4X0062
4X0063
4X0064
4X0065
4X0066

4X0021
4X0022
4X0023
4X0024
4X0025
4X0026

15”X43.25”
29”X43.25”
43”X43.25”
57”X43.25”
71”X43.25”
85”X43.25”

2X0071
2X0072
2X0073
2X0074
2X0075
2X0076

2 X 0 0 31
2X0032
2X0033
2X0034
2X0035
2X0036

4X0071
4X0072
4X0073
4X0074
4X0075
4X0076

4X0031
4X0032
4X0033
4X0034
4X0035
4X0036

#10 X 1.5” SELF TAPPING
SCREWS SPACED AS SHOWN
INTO RECESSED WALL PLATE
WITH 1/16” BETWEEN HEAD
AND WALL. I NSTALL SCREWS
IN KEY HOLES PROVI DED.

TWO TIER

1 over 1
2 over 2
3 over 3
4 over 4
5 over 5
6 over 6

2x
2x
2x
2x
2x
2x

14”x17”
28”x17”
42”x17”
56”x17”
70”x17”
84”x17”

14.75”
28.75”
42.75”
56.75”
70.75”
84.75”

43”
43”
43”
43”
43”
43”

60lbs
120lbs
180lbs
240lbs
300lbs
360lbs

ALL M EASUREMENTS

WOOD OR METAL LINTE L

ARE ± 1/16”

TOP VIEW R ECESSED MTG.
1/2” CONDUIT CONTAINING 3 NO. 14
WIRES TO 120 VOLT 60 HZ SERVICE. 1.6
AMPS PER VIEWI NG AREA.
FASTEN TO WALL THRU
HOLES IN FLAN GE

1” FLAN GE
(WHITE BAK ED ENAMEL)

1” FLAN GE

Finish: White Baked Enamel, Stainless Steel Trim (recessing flanges are white baked enamel)
Electrical: Viewers operate on 120 volt, 60 Hz, 1.6 Amps AC per viewing area. Surface mounting models are supplied with a 6’ three conductor line
cord (see diagram for wiring locations). Recessed models come with BX connectors. For special voltages consult factory.
✶ Optional Items: Modular Mobile system (pg. B-23), mobile stand, console arms, angulated viewing system ( pg. B-25), hinge kits and corner modules
( pg. B-24), hospital grade plugs (pg. B-30).

B - 10

8 0 0 / 3 4 7 - X R AY

DELUXE 470 SERIES

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

An exceptionally bright illuminator ideal for installations that
require minimum projection the Deluxe 470 is only 3.125” deep.
Each 14”x17” viewing area is illuminated by four F15T8/D 15
watt daylight fluorescent bulbs and is controlled by its own individual on/off rocker switch. All units are supplied with internal
dividers to prevent light spillover. Panoramic reflectors (without
dividers) can be provided upon request (at time of order). A
gravity film grip, extending the full width of the illuminator, holds
the top of the film firmly in place, while a film retainer ledge
supports film at the bottom of the viewing area. Each tier has a
one piece plexiglass viewing panel.
The 470 Deluxe series is constructed of 18 gauge cold rolled
steel. Multiple bank units incorporate unibody construction, not
a series of single units bolted together. Each tier has steel channel reinforcement of the rear section. Recessed models come
complete with recessing flanges, finished in white baked enamel, permanently welded to the case. Holes are provided in the
flange for ease of mounting.

SURFACE MOUNTED MODELS
DEPTH OF VIEWE RS: 3.125”
EXTERIOR DIM
WIDTH
HGT

VIEWING AREA

SingleBank
Tw o Bank
ThreeBank
Four Bank
Five Bank
Six Bank

CATALOG NO.
AUTO
APPROX. STANDARD
SHIP WT SWITCHES SWITCHES

14”x17”
28”x17”
42”x17”
56”x17”
70”x17”
84”x17”

14.75”
28.75”
42.75”
56.75”
70.75”
84.75”

21.5”
21.5”
21.5”
21.5”
21.5”
21.5”

25 lbs
50 lbs
75 lbs
100 lbs
125 lbs
150 lbs

106010
106020
106030
106040
1060150
106060

106110
106120
106130
106140
106150
106160

2x 14”x17”
2 x 28”x17”
2x 42”x17”
2x 56”x17”
2x 70”x17”
2x 84”x17”

14.75”
28.75”
42.75”
56.75”
70.75”
84.75”

43.125”
43.125”
43.125”
43.125”
43.125”
43.125”

50 lbs
100 lbs
150 lbs
200 lbs
250 lbs
300 lbs

107010
107020
107030
107040
107050
107060

107110
107120
107130
107140
107150
107160

STANDARD LOCATION OF LI NE
CORD ON S URFACE MOUNT AND
BX CONNECTOR
ON RECESSED
MOUNT

TWO TIER

1 over 1
2 over 2
3 over 3
4 over 4
5 over 5
6 over 6

WOOD OR METAL
LINTE L

PREFERRED
LOCATION FOR
OPTIONAL
JUNCTION BOX.
PIGTAILS FRO M
REAR OF ILLUMINATOR ARE
PROVIDED ON
REQUEST.

ALL M EASUREMENTS A RE ± 1/16”

RECESSED MODELS

#10 X 1.5” SELF TAPPING SCREWS
SPACED AS S HOWN
INTO RECESSED
WALL PLATE WITH
1/16” BETWEEN HEAD
AND WALL. INSTALL
SCREWS IN KEY HOLES PROVI DED.

VIEWING AREA

Single
Tw o
T hree
Four
Five
Six

CATALOG NO.

EXTERIOR DIM WALL OPENING APPROX. STAN DARD
AUTO
WIDTH HGT
WIDTH HGT SHIP WT SWITCHES SWITCHES

15”
29”
43”
57”
71”
85”

21.75”
21.75”
21.75”
21.75”
21.75”
21.75”

25 lbs
50 lbs
75 lbs
100 lbs
125 lbs
150 lbs

106210
106220
106230
106240
106250
106260

106310
106320
106330
106340
106350
106360

15”
29”
43”
57”
71”
85”

43.375”
43.375”
43.375”
43.375”
43.375”
43.375”

50 lbs
100 lbs
150 lbs
200 lbs
250 lbs
300 lbs

107210
107220
107230
107240
107250
107260

107310
10732 0
1073 3 0
1073 4 0
107350
10736 0

TWO TIER
1” FLANGE
(WHITE BAKED ENAMEL)
TOP VIEW R ECESSED MTG.

FASTEN TO WALL THRU
HOLES IN FLANGE

1/2” CONDUIT C ONTAINING 3 NO. 1 4
WI RES TO 120 VOLT 60 HZ SERVICE.
.66 AM PS PER VIEWI NG AREA.

1 over 1
2 over 2
3 over 3
4 over 4
5 over 5
6 over 6

2x
2x
2x
2x
2x
2x

14”x17”
28”x17”
42”x17”
56”x17”
70”x17”
84”x17”

14.75”
28.75”
42.75”
56.75”
70.75”
84.75”

43.125”
43.125”
43.125”
43.125”
43.125”
43.125”

1” FLANGE

Finish: Interiors, backs and sides are finished in white baked enamel. Fronts are polished stainless steel.
Electrical: Viewers operate on 120 volt, 60 Hz, 1.06 Amps AC per viewing area. Surface mounting models are supplied with a 6’ three conductor line
cord (see diagram for wiring locations). Recessed models come with BX connectors. For special voltages consult factory.
✶ Optional Items: hospital grade plugs, switch boxes, 68H custom formica shelf & 68HB wall mounting bracket (pg. B-30) Modular Mobile system
(pg. B-23), mobile stand , console arms, angulated viewing system (pg. B-25), hinge kits and corner modules ( pg. B-24).
B - 11

8 0 0 / 3 4 7 - X R AY

STREAMLINER III
SURFACE OR RECESSED

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

This sleek, slim technically advanced illuminator series fits into
any decor. Each 14”x17” viewing area is illuminated by three
F15T8/D 15 watt daylight fluorescent bulbs. A unique metalized
mylar reflector produces bright uniform light distribution. All units in
the series are supplied with hi-power factor low leakage ballasts which
provide instant-on operation. Illuminators come with internal
dividers between each 14”x17” viewing section to prevent light
spillover. Panoramic (uninterrupted) reflectors are available upon
request at time of order.
The Streamliner series is constructed of 18 gauge cold rolled steel.
Multiple bank units are constructed of a single housing, not a series of single units bolted together. A gravity film grip, extending the full width
of the illuminator, holds the top of the film firmly in place, while a
film retainer ledge supports film at the bottom of the viewing area.
Recessed models come complete with recessing flanges permanently mounted to the case. Holes are provided in the flange for ease of
mounting.
Surface Mount: 143001
SIDE VIEW
RIGHT SIDE

SURFACE MOUNTED MODELS
CATALOG NO.

DEPTH OF VIEWE RS: 3.125”
STANDARD LOCATION OF
LINE CORD ON S URFACE
MOUNT AND BX C ONNECTOR ON R ECESSED
MOUNT

EXTERIOR DIM
WIDTH H G T

VIEWING AREA

SingleBank
Tw o Bank
ThreeBank
Four Bank
Five Bank
Six Bank
Eight Bank

AUTO
APPROX. STANDARD
SHIP WT SWITCHES SWITCHES

14”x17” 14”
28”x17” 28”
42”x17” 42”
56”x17” 56”
70”x17” 70”
84”x17” 84”
112”X17” 112”

22”
22”
22”
22”
22”
22”
22”

22 lbs
39 lbs
55 lbs
70 lbs
135 lbs
145 lbs
178 lbs

143001
143002
143003
143004
143005
143006
143008

143021
143022
143023
143024
143025
143026
143028

1 over 1 2x 14”x17” 14”
2 over 2 2 x 28”x17” 28”
3 over 3 2x 42”x17” 42”
4 over 4 2x 56”x17” 56”
5 over 5 2x 70”x17” 70”
6 over 6 2x 84”x17” 84”
8 over 8 2x 112”X17” 112”

44”
44”
44”
44”
44”
44”
44”

43 lbs
112 lbs
143 lbs
187 lbs
234 lbs
243 lbs
349 lbs

143011
143012
143013
143014
143015
143016
143018

143031
143032
143033
143034
143035
143036
143038

TWO TIER

RECESSED MODELS
VIEWING AREA

Single
Tw o
Th r e e
Four
Five
Six
Eight

Bank
Bank
Bank
Bank
Bank
Bank
Bank

EXTERIOR D IM WALL OPENING APPROX. STANDARD
AUTO
WIDTH HGT WIDTH HGT SHIP WT SWITCHES SWITCHES

14”x17”
28”x17”
42”x17”
56”x17”
70”x17”
84”x17”
112”x17”

14”
28”
42”
56”
70”
84”
112”

22”
22”
22”
22”
22”
22”
22”

14.5”
28.5”
42.5”
56.5”
70.5”
84.5”
112.5”

22.5” 28 lbs
22.5” 67 lbs
22.5” 88 lbs
22.5” 113 lbs
22.5” 140 lbs
22.5” 150 lbs
22.5” 188 lbs

143041
143042
143043
143044
143045
143046
143048

143061
143062
143063
143064
143065
143066
143068

14”x17”
28”x17”
42”x17”
56”x17”
70”x17”
84”x17”
112”x17”

14”
28”
42”
56”
70”
84”
112”

44”
44”
44”
44”
44”
44”
44”

14.5”
28.5”
42.5”
56.5”
70.5”
84.5”
112.5”

44.5”
44.5”
44.5”
44.5”
44.5”
44.5”
44.5”

143051
143052
143053
143054
143055
143056
143058

143 071
143 072
143 073
143 074
143 075
143 076
143 078

TWO TIER

1 over 1
2 over 2
3 over 3
4 over 4
5 over 5
6 over 6
8 over 8

2x
2x
2x
2x
2x
2x
2x

65 lbs
116 lbs
155 lbs
191 lbs
237 lbs
246 lbs
369 lbs

ALL M EASUREMENTS A RE ± 1/16”

PREFERRED
LOCATI ON FOR
OPTIONAL
JUNCTION
BOX. PIGTAILS
FROM REAR O F
ILLUMINATOR
ARE PROVI DED
ON REQUEST.

#10 X 1.5” SELF TAPPING S CREWS
SPACED AS S HOWN
INTO RECESSED
WALL PLATE WITH
1/16” BETWEEN
HEAD AND WALL.
INSTALL SCREWS
IN KEYHOLES PRO VIDED.

WOOD
OR METAL LINTE L

1.5”

TOP VIEW R ECESSED MTG.

1.5” FLANGE
(WHITE BAKE D ENAME L)

1/2” CONDUIT C ONTAINING
3 NO. 14 WIRES TO 120 V OLT
60 HZ SERVICE. .66 AMPS P ER
VIEWI NG AREA.
1.5” FLANGE

Finish: White baked enamel (on cold rolled steel).
Electrical: Viewers operate on 120 volt, 60 Hz, .61 Amps AC per viewing area. Surface mounting models are supplied with a 6’ three conductor line
cord (see diagram for wiring locations). Recessed models come with BX connectors. For special voltages consult factory.
✶ Optional Items: hospital grade plugs, switch boxes, 68H custom formica shelf & 68HB wall mounting bracket (pg. B-30) Modular Mobile system (pg.
B-23), mobile stand, console arms, angulated viewing system ( pg. B-25), hinge kits and corner modules ( pg. B-24).
B - 12

CIRCULITE SERIES

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

Designed for optimum viewing at an economy price,
the Circulite illuminator is housed in an attractive, stylish
case constructed of 18 gauge cold rolled steel. Multiple
bank units are constructed of a single housing, not a series
of single units bolted together. A gravity film grip, extending the full width of the illuminator, holds the top of the
film firmly in place, while a film retainer ledge supports
film at the bottom of the viewing area. Each viewing area
is controlled by a rocker switch which is mounted in the
stainless steel trim at the right front of the illuminator.
Each 14”x17” viewing area is illuminated by one 32 watt
daylight circline fluorescent lamp. Dividers are installed to
prevent light spillover. When specified (at time of order)
illuminators can be supplied without dividers for
panoramic illumination.
Recessed models are supplied with stainless steel recessing
flanges and BX connector. The recessing flanges are provided loose (not attached to the illuminator) to allow for
partial recessing in thin walls.

SURFACE MOUNTED MODELS
CATALOG NO.

DEPTH OF VIEWERS: 4.75”
VIEWING AREA

SingleBank
Tw o Bank
ThreeBank
Four Bank
Five Bank
Six Bank
Eight Bank

EXTERIOR DIM
WIDTH
H GT

14”x17” 16.812”
28”x17” 30.812”
42”x17” 44.812”
56”x17” 58.812”
70”x17” 72.812”
84”x17” 86.812”
112”X17” 114.812”

APPROX. STANDARD AUTO
SHIP WT SWITCHES SWITCHES

18.187” 23 lbs
18.187” 35 lbs
18.187” 43 lbs
18.187” 66 lbs
18.187” 110 lbs
18.187” 129 lbs
18.187” 165 lbs

140001
140002
140003
140004
140005
140006
140008

140021
140022
140023
140024
140025
140026
140028

36.375”
36.375”
36.375”
36.375”
36.375”
36.375”
36.375”

140011
140012
140013
140014
140015
140016
140018

140031
140032
140033
140034
140035
140036
140038

TWO TIER

1 over 1 2x 14”x17” 16.812”
2 over 2 2 x 28”x17” 30.812”
3 over 3 2x 42”x17” 44.812”
4 over 4 2x 56”x17” 58.812”
5 over 5 2x 70”x17” 72.812”
6 over 6 2x 84”x17” 86.812”
8 over 8 2x 112”X17” 114.812”

45 lbs
94 lbs
132 lbs
164 lbs
202 lbs
233 lbs
291 lbs

RECESSED MODELS
VIEWING AREA

Single
Tw o
T hree
Four
Five
Six
Eight

CATALOG NO.

AUTO
EXTERIOR DIM WALL OPENING APPROX. STANDARD
WIDT H HGT
WIDTH
HGT SHIP WT SWITCHES SWITCHES

Bank 14”x17” 16.812”
Bank 28”x17” 30.812”
Bank 42”x17” 44.812”
Bank 56”x17” 58.812”
Bank 70”x17” 72.812”
Bank 84”x17” 86.812”
Bank 112”x17” 114.812”

18.187”
18.187”
18.187”
18.187”
18.187”
18.187”
18.187”

17”
31”
45”
59”
73”
87”
115”

18.5”
18.5”
18.5”
18.5”
18.5”
18.5”
18.5”

29 lbs
37 lbs
52 lbs
68 lbs
113 lbs
144 lbs
170 lbs

140041
140042
140043
140044
140045
140046
140048

140061
140062
140063
140064
140065
140066
140068

16.812” 36.375” 17”
30.812” 36.375” 31”
44.812” 36.375” 45”
58.812” 36.375” 59”
72.812” 36.375” 73”
86.812” 36.375” 87”
114.812” 36.375” 115”

36.687”
36.687”
36.687”
36.687”
36.687”
36.687”
36.687”

47 lbs
113 lbs
135 lbs
168 lbs
205 lbs
236 lbs
306 lbs

140051
140052
140053
140054
140055
140056
140058

140071
140072
140073
140074
140075
140076
140078

TWO TIER

ALL MEASUREMENTS A RE ± 1/16”

1 over 1
2 over 2
3 over 3
4 over 4
5 over 5
6 over 6
8 over 8

2x
2x
2x
2x
2x
2x
2x

14”x17”
28”x17”
42”x17”
56”x17”
70”x17”
84”x17”
112”x17”

Finish: White Baked Enamel, Stainless Steel Trim (recessing flanges are polished stainless steel)
Electrical: Viewers operate on 120 volt, 60 Hz, .7 Amps AC per viewing area. Surface mounting models are supplied with a 6’ three conductor line
cord (see diagram for wiring locations). Recessed models come with BX connectors. For special voltages consult factory.
✶ Optional Items: Modular Mobile system (pg B-23), mobile stand, console arms, angulated viewing system (pg B-25), corner modules (pg B-24),
switch boxes, hospital grade plugs (pg B-30).
B - 13

460 THIN LINE SERIES

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

Ideal for desk top or wall mounting, the 460 Thin Line Series (where thin line
refers to the width of the side walls of this illuminator) is equipped with rubber feet
properly balanced to sit safely on a desk. The key holed back makes it extremely
simple to mount on a wall. Preheat ballasts, one piece plexiglass fronts and stainless steel gravity grips are supplied as standard with this series. A bottom ledge film
support coupled with the stainless steel gravity grip guarantees maximum freedom
for viewing small or large films. Each section is individually controlled by an
on/off switch mounted on the top front center of each section. Each 14”x17” viewing section is illuminated by two F15T8/D daylight fluorescent bulbs.
Thin side walls allow banking with minimum interruption between viewing sections.
SURFACE AND DESK MOUNT
DEPTH OF VIEWE RS: 6”
VIEWING AREA

SingleBank
Tw o Bank
ThreeBank
Four Bank
Five Bank
Six Bank

EXTERIOR DIM
WIDTH H GT

APPROX. CATALOG
SHIP WT
NO.

14”x17”
28”x17”
42”x17”
56”x17”
70”x17”
84”x17”

14”
28”
42”
56”
70”
84”

18.75”
18.75”
18.75”
18.75”
18.75”
18.75”

21lbs
42lbs
60lbs
80lbs
125lbs
140lbs

460A
460D2
460D3
460D4
460D5
460D6

1 over 1 2x 14”x17”
2 over 2 2 x 28”x17”
3 over 3 2x 42”x17”
4 over 4 2x 56”x17”
5 over 5 2x 70”x17”
6 over 6 2x 84”x17”

14”
28”
42”
56”
70”
84”

37.5”
37.5”
37.5”
37.5”
37.5”
37.5”

62lbs
104lbs
140lbs
180lbs
230lbs
260lbs

460E1
460E2
460E3
460E4
460E5
460E6

Finish: Light Grey Baked Enamel
Electrical: Viewers operate on 120
volt, 60 Hz, .75 Amps AC per viewing area. Supplied with a 6’ three
conductor line cord (see diagram for
wiring locations). For special voltages consult factory.
✶ Optional Items: Trigger start
ballast, automatic switches, dual
intensity illumination (pg B-17),
switch boxes, hospital grade plugs
(pg B-30), handles for carrying (for
one or two bank illuminator) consult
factory.

TWO TIER

A LL M EASUREMENTS ARE ± 1/16”

WET FILM OR COUNTER TOP RECESSED VIEWER
Specially designed for viewing wet film or flat mounting in a counter top. The
body of the illuminator is constructed of either stainless steel or painted steel.
When wall mounting for wet film use, the plexiglass front extends .5” beyond the sides and
bottom of the illuminator. Two hanger hooks are supplied for wet film viewing. For flat
mounting (recessing into a counter top) the oversized plexiglass is recessed flush with
the counter top to allow for ease of marking film and viewing film without loss of valuable counter space. Two F15T8/D daylight fluorescent bulbs and built in reflectors
produce bright uniform illumination.
DEPTH OF VIEWE RS: 5.5”
VIEWING AREA

CATALOG NO.
EXTERIOR DIM PLEXI.DIM. APPROX. BAKED STAINLE SS
STEEL
WI DTH H GT WI DTH H GT SHI P WT ENAMEL

Single Bank 14”x17” 15.5” 18.5” 16.5” 19”

19lbs

202A

202S

ALL MEA SUREMENTS ARE ± 1/16”

202A shown with optional Drip Tray

Finish: Light Grey baked enamel or polished stainless steel
Electrical: Viewers operate on 120 volt, 60 Hz, .75 Amps AC per
viewing area. Supplied with a 6’ three conductor line cord. For special
voltages consult factory .
✶ Optional Item: Drip Tray (cat. # 404) approx. ship. weight 2 Lbs.

Counter Top

Counter Top
202A

B - 14

VUELITE SERIES (ALL ALUMINUM)

8 0 0 / 3 4 7 - X R AY

14” x 17” OR 14” x 36”

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

Each tier of the Vuelite is constructed of an overall aluminum
housing with internal dividers between each viewing section to
prevent light spillover. All models are supplied with two
F15T8/D daylight fluorescent bulbs per viewing section, giving
uniform illumination, an on/off rocker switch, a one piece
plexiglass viewing panel and a one piece full width gravity grip
film holder. Surface models come with rubber feet properly
balanced to sit safely on a desk.
Recessed models are supplied with stainless steel recessing
flanges and BX connector. The recessing flanges are not welded to the illuminator to allow for partial recessing in thin walls.

14”x17” SURFACE MOUNTED MODELS
DEPTH OF VIEWE RS: 5”

VIEWING AREA

EXTERIOR DIM
WIDTH
H GT

SingleBank 14”x17” 15.563”
Tw o Bank 28”x17” 29.563”
Three Bank 42”x17” 43.563”
Four Bank 56”x17” 57.563”
Five Bank 70”x17” 71.563”
Six Bank 84”x17” 85.563”
Eight Bank 112”X17” 113.563”

14”x17” RECESSED MODELS

CATALOG NO.

VIEWING AREA

APPROX. STANDARD AUTO
SHI P WT SWITCH SWITCH

Single
Tw o
Th r e e
Four
Five
Six
Eight

18.75” 20lbs 145001 145021
18.75” 40lbs 145002 145022
18.75” 60lbs 145003 145023
18.75” 80lbs 145004 145024
18.75” 100lbs 145005 145025
18.75” 120lbs 145006 145026
18.75” 160lbs 145008 145028

2x 14”x17”
2 x 28”x17”
2x 42”x17”
2x 56”x17”
2x 70”x17”
2x 84”x17”
2x 112”x17”

15.563”
29.563”
43.563”
57.563”
71.563”
85.563”
113.563”

37.5”
37.5”
37.5”
37.5”
37.5”
37.5”
37.5”

50lbs
90lbs
140lbs
180lbs
230lbs
280lbs
380lbs

145011
145012
145013
145014
145015
145016
145018

14”x17” 15.563”
28”x17” 29.563”
42”x17” 43.563”
56”x17” 57.563”
70”x17” 71.563”
84”x17” 85.563”
112”x17” 113.563”

18.75” 15.875”
18.75” 29.875”
18.75” 43.875”
18.75” 57.875”
18.75” 71.875”
18.75” 85.875”
18.75” 113.875”

14”x17” 15.563”
28”x17” 29.563”
42”x17” 43.563”
56”x17” 57.563”
70”x17” 71.563”
84”x17” 85.563”
112”x17” 113.563”

37.75” 15.875”
37.75” 29.875”
37.75” 43.875”
37.75” 57.875”
37.75” 71.875”
37.75” 85.875”
37.75” 113.875”

19” 20lbs
19” 40lbs
19” 60lbs
19” 80lbs
19” 100lbs
19” 120lbs
19” 160 lbs

145041
145042
145043
145044
145045
145046
145048

145061
145062
145063
145064
145065
145066
145068

145051
145052
145053
145054
145055
145056
145058

145071
145072
145073
145074
145075
145076
145078

TWO TIER

1
2
3
4
5
6
8

TWO TIER

1 over 1
2 over 2
3 over 3
4 over 4
5 over 5
6 over 6
8 over 8

Bank
Bank
Bank
Bank
Bank
Bank
Bank

CATALOG NO.

EXTERIOR DI M WALL OPENING APPROX.STANDARD AUTO
WIDTH HGT WI DTH H GT SHI P WT SWITCH SWITCH

145031
145032
145033
145034
145035
145036
145038

over
over
over
over
over
over
over

1
2
3
4
5
6
8

2
2
2
2
2
2
2

x
x
x
x
x
x
x

37.75”
37.75”
37.75”
37.75”
37.75”
37.75”
37.75”

50lbs
90lbs
140lbs
180lbs
230lbs
280lbs
380lbs

14”x36” SURFACE MOUNTED MODELS
DEPTH OF VIEWE RS: 5”
VIEWING AREA

EXTERIOR DIM
WI DTH
HGT

CATALOG NO.
APPROX STANDARD AUTO
SHI P WT SWITCH SWITCH

SingleBank 14”x36” 15.563” 37.563” 40lbs
Two Bank 28”x36” 29.563” 37.563” 75lbs

145101
145102

14”x36” REC ESSED MODELS
VIEWING AREA

EXTERIOR DI M
WIDTH
H GT

145121
145122

CATALOG NO.

WALL OPENING APPROX. STANDARD AUTO
WI DTH H GT
SHI P WT SWITCH SWITC H

Single Bank 14”x36” 15.563” 37.563” 15.813” 37.813” 40 lbs
Two
Bank 28”x36” 29.563” 37.563” 29.813” 37.813” 75lbs

145111
145112

145161
145162

A LL MEASUREMENTS ARE ± 1/16”

Finish: Anodized brushed aluminum
Electrical: Viewers operate on 120 volt, 60 Hz, .75 Amps AC per viewing area. Supplied with a 6’ three conductor line cord (see diagram for wiring locations). Recessed models come with BX connectors. For special voltages consult factory.
✶ Optional Items: automatic switches (pg. B-17) switch boxes, hospital grade plugs (pg B-30).
B - 15

188 - BRIGHT SPOT SERIES

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

The standard for radiology departments nationwide! These superior
high intensity illuminators with variable intensity illumination, rheostat foot
switch controls and swivel base . A best seller! A unique, low cost, bright
spot illuminator series for viewing dense film.
188: The Bright Spot lamp housing adjusts for easy viewing, the base has
key holes for wall mounting and plastic non-marring feet to stand on a desk.
188SM: A 188 with a special bracket that permits attachment to either side
of a non- recessed illuminator and swivels in any direction.
Both the 188 and the 188SM come with a rheostat foot switch to vary the
brightness of the special high intensity bulb which is surrounded by a polished aluminum reflector.
EXTERIOR DIMENSIONS: 6” Wide 7.5” High 6.75” Deep
188SM- Side Mount Bright Spot mounted on a 222 - 188- Bright Spot on desk
approx. shipping weight 9 lbs.
Finish: Light gray baked enamel (on cold rolled steel).
Electrical: Viewers operate on 120 volt, 60 Hz, .7 Amps AC. Supplied with a 6’ three conductor line cord. For special voltages consult factory.

183 MINI BRIGHT SPOT
A focused 75 watt Halogen lamp, mounted on a unique sliding stage,
enables adjustment of the spot size of this extremely bright illuminator. The
Mini Bright Spot comes with with a variable brightness control and an on/off
foot switch. There is a three inch diameter viewing area. A handle is provided
for ease of mobility.

EXTERIOR DIMENSIONS: 5.5” Wide 10” High
approx. shipping weight 18 lbs.

8.5” Deep

Finish: Light Grey baked enamel (on cold rolled steel)
Electrical: Viewers operate on 120 volt, 60 Hz, .1 Amp AC. Supplied with a 6’ three conductor line cord. For special voltages consult factory.

COOLBRITE SERIES
The CoolBrite is a unique high intensity illuminator designed for viewing dense film areas.
Using a specially designed lamp and electronics, the CoolBrite produces very high luminance, 18,000 cd/m2 candela per sq. meter), without the undesirable heat that is characteristic of incandescent “hot lights”. Measuring 8” wide , 13” long and 2.75” high these illuminators are extremely portable and can be placed on a desktop, mounted on a wall, or attached
to an articulated instrument- mounting arm for optimum convenience. Both foot switch and
film activated switches are standard. There is a built in automatic shut off to protect viewer
and film.

CB-4

CB-3

HIGH INTENSITY WITH
ADJUSTABLE IRIS

HIGH INTE NSITY

Luminance: Approx. 18,000 cd/m2
Aperture: 0.7”-4.4” Diameter
Power: 117 VAC ± 10%, 50/60 Hz, .75 amp

Luminance: Approx. 18,000 cd/m2
Aperture: 4.4” Diameter
Power: 117 VAC ± 10%, 50/60 Hz, .75 amp
Weight: 4.88 Lbs.

Weight: 5.2 Lbs.

EXTERIOR DIMENSIONS:
8” Wide 13” Long 2.75” High

B - 16

200 SERIES SURFACE & RECESSED

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w. s s x ra y. c o m

This is the illuminator of choice for
the finest hospitals in the U.S. Its
5 3/8” depth allows for maximum
light diffusion resulting in excellent
uniformity. Each 14”x17” viewing area
is illuminated by two F15T8/D 15 watt
daylight fluorescent bulbs. On/Off
rocker switches are mounted on the
right front side of the illuminator.
Internal sectional dividers (which produce a sharp demarcation between each
14”x17” viewing area and prevent light
spillover) are standard. Panoramic illumination - no internal dividers - is available upon request at time of order. A
gravity film grip, extending the full
width of the illuminator, holds the top
of the film firmly in place, while a film
retainer ledge supports film at the bottom of the viewing area.
Both Surface and Recessed Mounted
Models are available in one or two tier
configurations. Every illuminator in this
Two Bank surface Mounted Model (2 22ST)
series is manufactured of heavy gauge
steel which is formed and welded into a single integral housing giving it strength and durability and eliminating light leakage around the
housing.
Housings for surface mounted models are fabricated of cold rolled steel or stainless steel. Recessed model housings are cold rolled steel with either a stainless steel or cold rolled steel front frame mounted to the illuminator housing. They are self trimming and do not require additional recessing trims or roughin boxes.
Finish: Polished stainless steel or light gray baked enamel (on cold rolled steel).
(in standard configurations)
✶ Optional Items: hospital grade plugs, film clips, switch boxes, 68H custom formica shelf & 68HB wall mounting bracket -For ordering information see page B-30
Modular mobile system (pg. B-23), angulated viewing system (pg B-25), mobile stand (pg B-25), hinge kits and corner modules (B-24).See below for more options!

200 S E R I E S S UR FACE M ODE L S

ONE TIER SURFACE MOUNTED MODELS
DEPTH OF VIEWE RS: 5.375”
VIEWING AREA

SingleBank
Tw o Bank
ThreeBank
Four Bank
Five Bank
Six Bank
Eight Bank

EXTERIOR DIM
WIDTH
H GT

14”x17” 16.25”
28”x17” 30.312”
42”x17” 44.375”
56”x17” 58.375”
70”x17” 72.437”
84”x17” 86.375”
112”X17” 114.375”

19.125”
19.125”
19.125”
19.125”
19.125”
19.125”
19.125”

CATALOG NO.
APPROX. BAKED STAI NLESS
STEEL
ENAMEL
SHIP WT FINISH
FINISH

23lbs
43lbs
60lbs
80lbs
120lbs
140lbs
185lbs

208
222
223
224
225
226
228

208ST
222ST
223ST
224ST
225ST
226ST
228ST

A LL M EAS UREMENTS ARE ± 1/16”

TWO TIER SURFACE MOUNTED MODELS
CATALOG NO.

DEPTH OF VIEWE RS: 5.375”

Electrical: Supplied with a 6’ three conductor cord. 120 volts, 60HZ AC, .75
Amps per section. Consult factory for other
voltages.

VIEWING AREA

EXTERIOR DIM APPROX.
WIDTH
HGT
SHIP WT

1 over 1
2 over 2
3 over 3
4 over 4
5 over 5
6 over 6
8 over 8

16.25”
30.312”
44.375”
58.375”
72.437”
86.375”
114.375”

2x 14”x17”
2 x 28”x17”
2x 42”x17”
2x 56”x17”
2x 70”x17”
2x 84”x17”
2x 112”X17”

38.25”
38.25”
38.25”
38.25”
38.25”
38.25”
38.25”

60lbs
100lbs
140lbs
180lbs
220lbs
260lbs
340lbs

BAKED STAI NLESS
STEEL
ENAM EL
FIN ISH
FINISH

231
232
233
234
229
230
235

231ST
232ST
233ST
234ST
229ST
230ST
235ST

The following options M UST BE FACTORY I NSTALLED (specify option when ordering):
AUTOMATIC SWITCHES (FILM ACTIVATED AUTO SWITCH) Automatic switches turn on or off as film is inserted or withdrawn from the film grips. Included
with this option are trigger start ballasts for flicker free illumination and a special three way switch for choice of automatic or manual operating modes.
CATALOG # 199A (order one per viewing section)
TRIGGER START BALLASTS Special ballast provides flicker free illumination. CATALOG # 199 (order one per viewing section)
D OUBLE I NTENSITY I LLU MINATION Two additional bulbs/section increase light output. CATALOG # 197 (order one per viewing section)
B - 17

240 SERIES RECESSED

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

Two Bank Recessed Mounted Model (2 42ST)

ONE BANK REC ESSED MODELS
CATALOG NO.

SURFACE DEPTH OF VIEWERS:1.5”
VIEWING AREA

FRONT
WIDTH H GT

SingleBank
Tw o Bank
ThreeBank
Four Bank
Five Bank
Six Bank

17.0”
31.25”
45.25”
59.25”
73.25”
87.375”

14”x17”
28”x17”
42”x17”
56”x17”
70”x17”
84”x17”

20”
20”
20”
20”
20”
20”

WALL OPENING
W I DT H H GT

15.75”
29.812”
44.0”
58.062”
72.125”
85.563”

18.812”
18.812”
18.812”
18.812”
18.812”
18.812”

APPROX.
SHIP WT

21lbs
42lbs
63lbs
84lbs
105lbs
126lbs

2.75”

BAKED STAINLESS
ENAM EL STE EL
FINISH FINISH

240GT
242GT
243GT
244GT
245GT
241GT

240ST
242ST
243ST
244ST
245ST
241ST

2.75”

20”

RECESSED DEPTH OF VIEWE RS: 3.312”

1.5”

TWO TIER REC ESSED MODELS
CATALOG NO.

SURFACE DEPTH OF VIEWE RS:1.5”
VIEWING AREA

FRONT
WIDTH H GT

WALL OPENING
WIDTH
HGT

1 over 1 2x 14”x17”
2 over 2 2 x 28”x17”
3 over 3 2x 42”x17”
4 over 4 2x 56”x17”
5 over 5 2x 70”x17”
6 over 6 2x 84”x17”

17.0”
31.25”
45.25”
59.25”
73.25”
87.375”

15.75”
29.812”
44.0”
58.062”
72.125”
85.563”

39.875”
39.875”
39.875”
39.875”
39.875”
39.875”

APPROX.
SHIP WT

38.75” 43lbs
38.75” 84lbs
38.75” 127lbs
38.75” 169lbs
38.75” 211lbs
38.75” 253lbs

BAKED STAINLESS
STEEL
ENAM EL
FINISH
FINISH

2402GT 2402ST
2422GT 2422ST
246GT 246ST
248GT 248ST
247GT 247ST
249GT 249ST

39.875”

RECESSED DEPTH OF VIEWE RS: 3.312”
A LL M EASUREMENTS ARE ± 1/16”

Electrical: Supplied with a 6’ three conductor cord. When BX connector is required add X
after catalog number 120 volts, 60HZ AC, .75 Amps per section. Consult factory for other voltages.
B - 18

(in standard configuration s)

200 SERIES CONSOLE STYLE

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w. s s x ra y. c o m

This special mounting of the 200 series was designed for better
viewing, comparison and marking of films. On two tier units the
lower tier is tilted at either 200 or 35 0 from the vertical (the
upper tier remains vertical). This arrangement facilitates handling
of the films and is ideal for comfortable seated viewing. The console may be placed on a desk or table or it can be fastened to a
wall quickly with keyholes provided on rear of viewer. Specify
desired angle when placing order. Units chosen in the baked enamel
finish or all stainless steel finish use the Surface Mounted Models
of the 200 Series. The 239 series with baked enamel body and
stainless steel front utilizes the recessed models of the 200 Series.

CATALOG NO.

CONSOLE STYLE

BAKED ENAMEL /STAINLESS
STEEL FI NISH

200 SE RIES ON C ONSOLE
ARMS

BAKED ENAMEL WITH STAINLESS
STEEL FRONT

STAINLESS
STEEL FRONT

EXTERIOR

APPROX.

VIEWI NG AREA

BAKED STAI NLESS
ENAMEL STEEL
CATALOG EXTERIOR
WI DTH
WI DTH SHIP WT FINISH FINISH
NO.

Tw o
Three
Four
Five
Six
Eight

30.312”
44.375”
58.375”
72.437”
86.375”
114.375”

60lbs
80lbs
100lbs
120lbs
140lbs
180lbs

237A
237B
237
237C
237D
237E

237SA
237SB
237S
237SC
237SD
237SE

239A
239B
239C
239D
239E

31.25
45.25
59.25
73.25
87.375

28”x17” 30.312”
42”x17” 44.375”
56”x17” 58.375”
70”x17” 72.437”
84”x17” 86.375”

100lbs
140 lbs
180lbs
220lbs
240lbs

238A
238B
238
238C
238D

238SA
238SB
238S
238SC
238SD

239G
239H
239
239J
239K

31.25
45.25
59.25
73.25
87.375

Bank 28”x17”
Bank 42”x17”
Bank 56”x17”
Bank 70”x17”
Bank 84”x17”
Bank 112”X17”

TWO TIER

2 over 2
3 over 3
4 over 4
5 over 5
6 over 6

2x
2x
2x
2x
2x

200 SERIES MOBILE ILLUMINATORS
Two styles of mobile illuminator bases have been
created specifically for the 200 Series Console
Style or Tilting Illuminators. The Desk Style
Mobile Base is designed for easy, convenient
reading while sitting. The Hi-Style base is ideal
for lectures and conferences as well as general
viewing when standing. Both bases are designed
for strength, rigidity and convenience. Bases are
mounted on ball bearing swivel casters for ease of
mobility even on carpet. The length of these
bases is matched to the number of banks of illuminators desired.
200 SERIES CONSOLE STYLE ILLU M INATOR ON

H I - STYLE BA S E
available in single or two tier configurations, from two to
six banks wide - fixed 3 50 angulated viewing
DEPTH OF BA SE: 19”
HEIGHT OF BASE: 36”
VI EWING AREA

Tw o
Three
Four
Five
Six

Bank
Bank
Bank
Bank
Bank

CATALOG NO.
BAKED

EXTERIOR APPROX. ENAMEL
FINIS H
WI DTH SHI P WT

STAINLESS

STEEL
FRONT

28”x17”
42”x17”
56”x17”
70”x17”
84”x17”

32.75”
46.75”
60.75”
74.75”
88.75”

150lbs
200lbs
250lbs
300lbs
350lbs

220A
220B
220C
220D
220E

220AS
220BS
220CS
220DS
220ES

28”x17”
42”x17”
56”x17”
70”x17”
84”x17”

32.75”
46.75”
60.75”
74.75”
88.75”

190lbs
260lbs
330lbs
400lbs
470lbs

220F
220G
220K
220H
220J

220FS
220GS
220KS
220HS
220JS

The Hi-Style Base is 36” high and 19”
deep. The lower shelf is 12” above the
floor.
The Desk Style Base is 25” high and
19” deep. A shelf in each of the two side
compartments can be used for film or
utility storage.

TWO TIER

2 over 2
3 over 3
4 over 4
5 over 5
6 over 6

2x
2x
2x
2x
2x

200 SERIES CONSOLE STYLE ILLU MINATOR ON

D E S K BA S E
available in single or two tier configurations, from
four to six banks wide - fixed 350 angulated viewing
DEPTH OF BASE: 19”
HEIGHT OF BA SE: 25.5”
VIEWING AREA

CATALOG NO.
BAKED STAINLESS

EXTERIOR APPROX. ENAMEL STE EL
WIDTH SHIP WT FINISH FRONT

Four Bank 56”x17” 60.75”
Five Bank 70”x17” 74.75”
Six Bank 84”x17” 88.75”

255lbs
305lbs
355lbs

220P
220Q
220R

220PS
220QS
220RS

335lbs
405lbs
475lbs

220
220M
220L

220S
220MS
220LS

TWO TIER

4 over 4 2x 56”x17” 60.75”
5 over 5 2x 70”x17” 74.75”
6 over 6 2x 84”x17” 88.75”
ALL MEASUREMENTS A RE ± 1/16”

Finish: Mobile Bases : light grey baked enamel. Illuminators: light grey baked enamel with Stainless Steel front or light grey baked enamel (on cold rolled steel).
Electrical: Supplied with a 6’ three conductor cord. 120 volts, 60H Z AC. Consult factory for other voltages.
✶ Optional Items: Trigger start ballasts, automatic switches, double intensity illumination (pg. B-17) - hospital grade plugs, film clips and switch boxes - For ordering information see page B-3 0
✶ Optional Desk Base Items: 207B Storage Drawer and 207C Pull-out Writing Shelf.

B - 19

200 SERIES TILTING MOBILE
ILLUMINATORS

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

A uniquely designed arm bolted to the Hi-Style Base and Desk Base allows the 200 Series Illuminator full range tilting ability. The illuminator can be locked in a vertical or an angled position. Two tier models have an additional pivot in the center to allow the lower tier to
tilt upwards and lock at 150, 300, 450 or 600 while the upper tier
remains vertical, or the top and bottom tiers can be tilted as a
unit and locked in the 150, 300, 450 positions.
200 SERIES TI LTING ILLU MINATOR ON
HI-STYLE BASE
available in single or two tier configurations,
from two to six banks wide
Full Range Tilting - 15 0, 30 0, 45 0, 60 0

TILTING ILLUM. on HI-STYLE BASE
DEPTH OF BA SE: 19”
HEIGHT OF BASE: 36”
VIEWING AREA

CATALOG NO.
BAKED STAINLESS

EXTERIOR APPROX ENAMEL STEEL
WIDTH SHIP WT FINISH FRONT

Tw o Bank
ThreeBank

28”x17” 37.375” 100 lbs
42”x17” 51.375” 150 lbs

212
213

212S
213S

Four Bank

56”x17” 65.375” 200 lbs

214

214S

Five Bank

70”x17” 79.375” 290 lbs

214A

214AS

Six Bank 84”x17” 93.375” 340 lbs

214B

214BS

Eight Bank 112”x17” 121.375” 440 lbs

214C

214CS

TWO TIER

2 over 2 2 x 28”x17” 37.375” 180 lbs

215

215S

3 over 3 2x 42”x17” 51.375” 250 lbs

216

216S

4 over 4 2x 56”x17” 65.375” 320 lbs

217

217S

5 over 5 2x 70”x17” 79.375” 390 lbs
6 over 6 2x 84”x17” 93.375” 460 lbs

217C
217D

217CS
217DS

ALL M EASUREMENTS ARE ± 1/16”

217 with lower tier tilted at a 30 0 angle

200 SERIES TILTING ILLU MINATOR ON
DESK BASE
available in single or two tier configurations,
from four to six banks wide
Full Range Tilting - 150, 30 0, 45 0, 60 0

TILTING ILLUM. on DESK BASE
DEPTH OF BA SE: 19”
HEIGHT OF BASE: 25.5”

CATALOG NO.
BAKED STAIN LESS

VIEWING AREA

EXTERIOR APPROX. ENAMEL STEEL
WIDTH SHIP WT FINISH FRONT

Four Bank 56”x17” 65.375” 205 lbs

218

218S

Five Bank 70”x17” 79.375” 295 lbs

218A

218AS

Six Bank 84”x17” 93.375” 345 lbs

218B

218BS

TWO TIER

4 over 4 2x 56”x17” 65.375” 325 lbs

219

216S

5 over 5 2x 70”x17” 79.375” 395 lbs

219C

219CS

6 over 6 2x 84”x17” 93.375” 465 lbs

219D

219DS

219 with lower tier tilted at a 300 angle

Finish: Mobile Bases : light grey baked enamel.
Illuminators: light grey baked enamel with Stainless Steel front or light grey baked enamel (on cold rolled steel).
Electrical: Supplied with a 6’ three conductor cord. 120 volts, 60HZ AC. Consult factory for other voltages.
✶ Optional Items: Trigger start ballasts, automatic switches, double intensity illumination (pg. B-17) - hospital grade plugs, film clips and switch boxes - For
ordering information see page B-30
✶ Optional Desk Base Items: 207B Storage Drawer and 207C Pull-out Writing Shelf.
B - 20

24 x 30cm and 18 x 24cm

8 0 0 / 3 4 7 - X R AY

MAMMOGRAPHY SERIES

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

Specially designed for viewing 24x30cm (146000 Series) or 18x24cm
(147000 Series) film, these series of illuminators feature very bright and
even lighting in each viewing panel. The 146000 series has three
F14T8/D daylight fluorescent bulbs per viewing section and the 147000 has
two F14T8/D bulbs per section. Both series use electronic ballasts to produce flicker free lighting. Each section is individually controlled by an on/off
rocker switch, thus allowing the person reading the film to reduce peripheral glare by simply switching off the sections not in use. To further reduce
glare and prevent light spillover, the illuminators are provided with divided sections.
Each tier is constructed of heavy duty steel, with a continuous gravity grip
to hold the film firmly in place, and a one piece plexiglass viewing panel.
On multiple bank and two tier units switches are grouped together and
mounted in the center of the bottom front panel of the bottom tier.
Recessed models are supplied with stainless steel recessing flanges and BX
connector.
Light output exceeds ACR requirements.
For mammography viewers with curtains see pages B-5 and B-6.

146012 shown with optional Console Arms at 200angle (140272-20)
ALL M EASUREMENTS ARE ± 1/16”

24x30cm S URFACE MOUNTED MODELS
DEPTH OF VIEWE RS: 4.375”
VIEWING AREA

24x30cm REC ESSED MODELS

CATALOG NO.

EXTERIOR DIM APPROX STANDARD AUTO
WIDTH
HGT SHIP WT SWITCH SWITCH

SingleBank 24x30cm 10.437”
Tw o Bank 48x30cm 19.875”
Three Bank 72x30cm 29.312”
Four Bank 96x30cm 38.750”
Five Bank 120x30cm 48.187”
Six Bank 144x30cm 57.625”

16”
16”
16”
16”
16”
16”

21lbs
42lbs
63lbs
84lbs
105lbs
126lbs

146001
146002
146003
146004
146005
146006

146021
146022
146023
146024
146025
146026

Single
Tw o
Th r e e
Four
Five
Six

32”
32”
32”
32”
32”
32”

42lbs
84lbs
126lbs
168lbs
210lbs
252lbs

146011
146012
146013
146014
146015
146016

146031
146032
146033
146034
146035
146036

1
2
3
4
5
6

2x 24x30cm
2 x 48x30cm
2x 72x30cm
2x 96x30cm
2x 120x30cm
2x 144x30cm

10.437”
19.875”
29.312”
38.750”
48.187”
57.625”

18x24cm SURFACE MOUNTED MODELS
DEPTH OF VIEWE RS: 4.375”
VIEWING AREA

SingleBank 18x24cm
Tw o Bank 36x24cm
Three Bank 54x24cm
Four Bank 72x24cm
Five Bank 90x24cm
Six Bank 108x24cm
2x 18x24cm
2 x 36x24cm
2x 54x24cm
2x 72x24cm
2x 90x24cm
2x 108x24cm

10.437”
19.875”
29.312”
38.750”
48.187”
57.625”

16”
16”
16”
16”
16”
16”

10.687”
20.125”
29.562”
39.000”
48.437”
57.875”

16.25”
16.25”
16.25”
16.25”
16.25”
16.25”

21lbs
42lbs
63lbs
84lbs
105lbs
126lbs

146041
146042
146043
146044
146045
146046

146061
146062
146063
146064
146065
146066

over
over
over
over
over
over

1
2
3
4
5
6

2
2
2
2
2
2

x 24x30cm
x 48x30cm
x 72x30cm
x 96x30cm
x120x30cm
x144x30cm

10.437”
19.875”
29.312”
38.750”
48.187”
57.625”

32”
32”
32”
32”
32”
32”

10.687” 32.25”
20.125” 32.25”
29.562” 32.25”
39.000” 32.25”
48.437” 32.25”
57.875” 32.25”

42lbs
84lbs
126lbs
168lbs
210lbs
252lbs

146051
146052
146053
146054
146055
146056

146071
146072
146073
146074
146075
146076

18x24cm RECESSED MODELS

CATALOG NO.

EXTERIOR DIM APPROX STANDARD AUTO
WIDTH
HGT SHIP WT SWITCH SWITCH

VIEWING AREA

8”
15.094”
22.187”
29.281”
36.375”
43.468”

16”
16”
16”
16”
16”
16”

17lbs
34lbs
51lbs
68lbs
85lbs
102lbs

147001
147002
147003
147004
147005
147006

147021
147022
147023
147024
147025
147026

Single
Tw o
Th r e e
Four
Five
Six

8”
15.094”
22.187”
29.181”
36.375”
43.468”

32”
32”
32”
32”
32”
32”

34lbs
68lbs
102lbs
136lbs
170lbs
204lbs

147011
147012
147013
147014
147015
147016

147031
147032
147033
147034
147035
147036

1
2
3
4
5
6

Bank 18x24cm
Bank 36x24cm
Bank 54x24cm
Bank 72x24cm
Bank 90x24cm
Bank 108x24cm

CATALOG NO.

EXTERIOR DI M WALL OPENING APPROX STANDARD AUTO
WIDTH H GT WIDTH H GT S HIP SWITCH SWITCH

8”
15.094”
22.187”
29.281”
36.375”
43.468”

16”
16”
16”
16”
16”
16”

8.250”
15.343”
22.437”
29.531”
36.625”
43.718”

16.25”
16.25”
16.25”
16.25”
16.25”
16.25”

17lbs
34lbs
51lbs
68lbs
85lbs
102lbs

147041
147042
147043
147044
147045
147046

147061
147062
147063
147064
147065
147066

8”
15.094”
22.187”
29.181”
36.375”
43.468”

32”
32”
32”
32”
32”
32”

8.250” 32.25”
15.343” 32.25”
22.437” 32.25”
29.531” 32.25”
36.625” 32.25”
43.718” 32.25”

34lbs
68lbs
102lbs
136lbs
170lbs
204lbs

147051
147052
147053
147054
147055
147056

147071
147072
147073
147074
147075
147076

TWO TIER

1 over 1
2 over 2
3 over 3
4 over 4
5 over 5
6 over 6

Bank 24x30cm
Bank 48x30cm
Bank 72x30cm
Bank 96x30cm
Bank 120x30cm
Bank 144x30cm

TWO TIER

1 over 1
2 over 2
3 over 3
4 over 4
5 over 5
6 over 6

CATALOG NO.
EXTERIOR DI M WALL OPENING APPROX STANDARD AUTO
WI DTH H GT WI DTH H GT
SHIP SWITCH SWITCH

VIEWING AREA

over
over
over
over
over
over

1
2
3
4
5
6

2
2
2
2
2
2

x 18x24cm
x 36x24cm
x 54x24cm
x 72x24cm
x 90x24cm
x 108x24cm

Finish: Light gray baked enamel (on cold rolled steel).
Electrical: Viewers operate on 120 volt, 60 Hz AC; 146000 SERIES - .8 Amps 147000 SERIES - .6 Amps per viewing area Surface mounting models are supplied with a 6’ three conductor line cord (see diagram for wiring locations). Recessed models come with BX connectors. For special voltages consult factory.
✶ Optional Items: Console Arms (pg B-25), Film Activated Switches (pg B-17), hospital grade plugs, 68H custom formica shelf & 68HB wall mounting bracket
(pg B-30) .

B - 21

14” X 36” SURFACE OR RECESSED

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
Ideal for Orthopedic films, each 14”x36” viewing area
is illuminated by two F30T12/D 30 watt daylight fluorescent bulbs. An On/Off rocker switch is centered on
SURFACE MOUNTED MODELS
the top front of each viewing area. Internal sectional
DEPTH OF VIEWERS: 5.25”
dividers (which produce a sharp demarcation between
EXTERIOR DIM APPROX. CATALOG
VIEWING AREA WIDTH HGT SHI P WT
NO.
each 14”x36” viewing area and prevent light spillover)
SingleBank 14”x36” 15.625” 38.375” 36lbs
101600
are standard. A gravity film grip, extending the full
Two Bank 28”x36” 29.625” 38.375” 65lbs
101610
width of the illuminator, holds the top of the film firmly
Three Bank 42”x36” 43.625” 38.375” 120lbs 101620
Four Bank 56”x36” 57.625” 38.375” 155lbs 101630
in place, while a film retainer ledge supports film at the
bottom of the viewing area. Four film clips spaced along
RECESSED MODELS
the sides can be used for smaller films. Every
EXTERIOR DIM WALL OPENING APPROX. CATALOG
illuminator in this series is manufactured of
NO.
VIEWING AREA WIDTH H GT WI DTH H GT SHI P WT
Single Bank 14”x36” 15.625” 38.375” 15.875” 38.625” 40 lbs 101640
heavy gauge cold rolled steel. Recessed models
Two Bank 28”x36” 29.625” 38.375” 29.875” 38.625” 69lbs 101650
are supplied with stainless steel recessing
Three Bank 42”x36” 43.625” 38.375” 43.875” 38.625” 125lbs 101660
flanges and BX connector. The recessing
Four Bank 56”x36” 57.625” 38.375” 57.875” 38.625” 160lbs 101670
flanges are provided loose (not attached to the
illuminator) to allow for partial recessing in
A LL M EASUREMENTS ARE ± 1/16”
thin walls.
w w w . s s x ra y. c o m

✶ Option: AUTOMATIC SWITCHES (FILM ACTIVATED AUTO SWITCH) Automatic switches turn
on or off as film is inserted or withdrawn from the film grips. A special three way switch is included with this option for choice of automatic or manual operating modes.

Create a unique mobile unit using the 200 series High Style Base (2 to 6 bank widths) or Desk Base (4 to 6 bank widths). Use
only 14”x 36” illuminators or mix with two tier 200 Series Illuminators (double intensity option recommended) (see page B-19)
Finish: Light gray baked enamel (on cold rolled Electrical: Viewers operate on 120 volt, 60 Hz, .65 Amps AC per viewing area. Supplied with a 6’
three conductor line cord (see diagram for wiring locations). Recessed models come with BX connectors. For special voltages consult factory.
✶ Optional Items: High Style Base, Desk Base (B-19), Hospital grade plugs, switch boxes, 68H custom formica shelf & 68HB wall mounting bracket,
and hinge kits. For ordering info. see page B-30

14” X 51” SURFACE OR RECESSED
Constructed of heavy gauge cold rolled steel with four F60T12/D daylight fluorescent bulbs per viewing area
and internal sectional dividers, these illuminators are ideal for Spine films. An on/off rocker switch is
centered on the right front of each viewing area. A gravity film grip, extending the full width of the illumi nator, holds the top of the film firmly in place, while a film retainer ledge supports film at the bottom of the
viewing area. Three film clips spaced along the sides keep film from buckling. Recessed models are supplied with stainless steel recessing flanges and BX connector. The recessing flanges are provided loose (not
attached to the illuminator) to allow for partial recessing in thin walls.
SURFACE MOUNTED MODELS
DEPTH OF VIEWERS:5.75”
VIEWING AREA

EXTERIOR DIM APPROX. CATALOG
WIDTH H GT SHIP WT
NO.

SingleBank 14”x51” 16.375”
Two Bank 28”x51” 30.375”
Three Bank 42”x51” 44.375”
Four Bank 56”x51” 58.375”

60.5” 95lbs
60.5” 160lbs
60.5” 240lbs
60.5” 320 lbs

101710
101720
101730
101740

RECESSED MODELS
VIEWING AREA

Single
Two
Three
Four

Bank
Bank
Bank
Bank

14”x51”
28”x51”
42”x51”
56”x51”

EXTERIOR DIM WALL OPENING APPROX. CATALOG
WIDTH HGT WI DTH HGT SHI P WT
NO.

16.375”
30.375”
44.375”
58.375”

60.5”
60.5”
60.5”
60.5”

16.625”
30.625”
44.625”
58.625”

60.75”
60.75”
60.75”
60.75”

95lbs
160lbs
240lbs
320lbs

101760
101770
101780
101790

ALL M EASUREMENTS ARE ± 1/16”

Finish: Light gray baked enamel (on cold rolled steel)
Electrical: Viewers operate on 120 volt, 60 Hz, 2.5 Amps AC per viewing area. Supplied with a 6’ three conductor line cord
(see diagram for wiring locations). Recessed models come with BX connectors. For special voltages consult factory.
✶ Optional Items: Modular Mobile System (pg B-23), Hospital grade plugs, switch boxes, 68H custom formica shelf & 68HB
wall mounting bracket (pg B-30)

B - 22

MODULAR MOBILE
ILLUMINATOR SYSTEM

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

Select the components that best suit
your requirements and customize your
own mobile illuminator. Designed with
features suggested by radiologists to make
film viewing easier and more convenient,
the Modular Mobile System allows you the
choice of illuminator, mobile bases
and mounting arms.
Base modules and mounting arms are constructed of heavy gauge steel and finished
in light gray baked enamel. Tops are made
of wood with a choice of walnut grain or
white formica laminate.
Mounting arms for one tier units (168038)
fix the illuminators in a vertical position.
Mounting arms for two tier units (168039)
allow the lower tier to be adjusted from verti cal to an angle of 350. [If ordering the 149005
Mammography Illuminator 168040 arms
will be needed.]

200 series (234) shown with 168039 arms at a 200angle, walnut grain formica top (168004), two bases w/ vertical partitions (168010)

TO ORDER A MODULAR MOBILE
SYSTEM
SELECT:
1 - I LLUMINATOR STYLE: choose from the following series 200, 2000, 4000, 2X, 4X,
CIRCULITE, CHAM ELEON,
STREAMLI NER III,
DELUXE 470 OR
PRECISION MAM MOGRAPHY SERIES

FORMICA TOP (C)
DESCRIPTION

Three Bank Wide
Four Bank Wide
Five Bank Wide
S ix Bank Wide
Eight Bank Wide

MOUNTING ARMS (A)

EXTERIOR DIM APPROX.
LENGTH DEPTH SHIP WT

48”
60”
74”
88”
116”

Base consoles are 24” deep and 27” high.
The height of the bases can be increased to
36” by ordering 168020 leg extensions.
The length of the formica top is determined by the size of the illuminator chosen. If choosing a three bank illuminator
(or if only one of the base consoles is
desired) a straight leg with casters (168013)
is available.

24”
24”
24”
24”
24”

50 lbs
75 lbs
115 lbs
155 lbs
195 lbs

CAT.NO.
WHITE OR
WALNUT

168003
168004
168005
168006
168008

DESCRIPTION

Straight Leg
(168013)

BASE C ONSOLES (B)

2 - N UMBER

OF VIEWING AREAS

3 - M OUNTI NG
4 - T WO

ARMS

(A)

BASE CONSOLES

5 - F ORMICA

TOP

(B)

(in white or walnut) (C)

DESCRIPTION

W/Vertical Partitions
W / S h e lf & D r a w e r
W/Horiz. S helf
Straight L eg

EXTERIOR DIM APPROX.
LENGTH DEPTH SHIP WT

19”
19”
19”
19”

24”
24”
24”
24”

75 lbs
75 lbs
75 lbs
50 lbs

CAT.NO.

168010
168011
168012
168013

If you have any questions our engineering department
will be happy to assist you at 1-800-347-XRAY.
Base With
Vertical
Partitions
(168010)

Base With
Writing
Shelf and
Drawer
(168011)

Base With
One
Horizontal
Shelf
(168012)

B - 23

APPROX.
SHIP WT

F o r Single Ti e r I l l u m . 60 lbs
Fo r Two T ie r Il l um. 70 lbs
F o r 149 0 05 I l l u m . 70 lbs

CAT.NO.

168038
168039
168040

CORNER MODULES

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

Wall mounted Corner Module (140278) shown with 200 series illuminators
(234, 231 and 232), Console Arms at 2 0 0 angle (140272-20)

For a sharp professional appearance in your reading room our Corner Modules are
designed to maximize usable space in a reading room while creating an attractive
functional reading station. They can be custom configured to suit the users requirements,
and are able to be wall mounted or desk mounted. The Corner Module fills a corner space
and mates with a two tier illuminator on each side (see choice of illuminators below)
to form an attractive custom designed wall unit. The bottom tier can be fixed at a 20 0 or
35 0 angle for ease of viewing. The Corner Module can hold a single bank two tier, a two
bank two tier, single bank on top and a Bright Spot below or a single on top and a
solid filler in the bottom tier.
Corner Modules are constructed of cold rolled steel and are finished to match the illuminators selected.

CATALOG # 140278 (Corner Module only)
✶ Optional Items: 68H custom formica shelf & 68HB wall mounting bracket (pg B-30)

TO ORDER A CORNER MODULE
please SUBMIT A ROUGH SKETCH with room
dimensions showing the location and style
of illuminator chosen, the number of viewing sections, the angle of the console arms
and what you wish built into the corner
module. If you have any questions our engineer ing department will be happy to assist you at 1800-347-XRAY. (If optional switch boxes are
ordered special interconnects may be
required for electrical hook-up between illuminators (cat.# 140280 - see page B-30)
SELECT:
1 - ILLUMINATOR STYLE: choose from the
following series 200, 2000, 4000, 2X, 4X, CIRCULITE,
CHAMELEON, STREAMLI NER III
OR DELUXE 470
2 - N UMBER OF VIEWING AREAS
3 - A NGLE OF CONSOLE ARMS
4 - D ESIGN OF CORNER MODULE
5 - D ESK OR WALL MOUNT

HINGED CONNECTORS
This unique hinge permits mounting of illuminators in a
semi-circular side by side arrangement. The hinge provides flexibility to gracefully span room corners or to set
the illuminator sections to almost any desired position.
The heavy duty full length hinges are factory installed
on any combination of illuminators. (Angulated systems
[i.e. console arms] cannot be used with hinged connectors).
To order please submit a sketch, with room dimensions, showing the location of the illuminators and
hinges. If optional switch boxes are ordered special
interconnects (cat.# 140280 - see page B-30) may be required for electrical hook-up between illuminators.

CATALOG # 140276

S HIP. W T 16

LBS

B - 24

FOUR BANK MOBILE STAND

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

This sturdy attractive mobile stand is designed to
be used with the following models of one and two
tier four bank illuminators:
200, 2000, 4000, 2X, 4X, CIRCULITE,
CHAMELEON, STREAMLI NER III, OR DELUXE 470
The base and illuminator mounting arms are made
of heavy gauge steel (finished in brown baked
enamel) for strength and stability.
The 1.25” thick wooden top is laminated with
white formica for durability. The entire unit is
mounted on 3” swivel casters for ease of mobility.
FOUR BANK M OBILE STAND
DESCRIPTION

Single T i e r
Two T i e r

APPROX. CAT.NO.
EXTERIOR DIM
HGT D EPTH WIDTH SHIP WT

29.25” 25.25” 59.625” 100 lbs
29.25” 25.25” 59.625” 100 lbs

140100
140103

Optional Items
DESCRIPTION

P u l l - o ut Shelf
Sha ll o w Dra we r
Hinged Recorder Shelf

APPROX.
SHIP WT

CAT.NO.

20 lbs
20 lbs
40 lbs

140110
140111
140112

Shown with optional Pull-out Shelf (140110), Shallow Drawer (140111), and Hinged Recorder Shelf (140112).

CONSOLE ARMS
FIXED ANGLE VIEWING
Console Arms add the convenience and comfort of angulated viewing (fixed at either a 200 or 350 angle) to
the following single and two tier wall mount illuminators:
2000, 4000, 2X, 4X, CIRCULITE, C HAMELEON, S TREAMLI NER III,
DELUXE 470

P RECISION MAMMOGRAPHY SERIES

They are available in rear mount, side mount and desk mount configurations. Configuration needs to be specified at time of illuminator order
(to enable factory modifications of illuminator wiring).
Console Arms are made of heavy gauge steel and finished in baked
enamel to match the illuminators chosen.

CONSOLE ARMS

APPROX. CATALOG
NO.
SHIP WT

Single Tier 20 0 Angle
Single Tier 350 Angle

ANGLED VIEWING
(Angulated viewing system)

Adjust the viewing angle (of the lower tier) of a two tier illuminator from 00 to 350 to meet
your specific needs. Special lock knobs make it easy to adjust the angle of the lower tier to
afford maximum comfort while reading films.
For use with the following wall mount illuminators:
200, 2000, 4000, 2X, 4X, CIRCULITE, C HAMELEON, S TREAMLI NER III,
OR

PRECISION MAMMOGRAPHY SERIES

Made of heavy gauge steel and finished in baked enamel to match the illuminators chosen.

MUST BE FACTORY I NSTALLED

CATALOG # 140279
S HIP. W T 7 LBS
B - 25

140271-20
140271-35

25 lbs
25 lbs

140272-20
140272-35

TWO TIER

Two Tier 200 A n g l e
Two Tier 350 A n g l e

ADJUSTABLE

DELUXE 470

20 lbs
20 lbs

Shown:
Rear Mount Console Arms

185 AND 185I HIGH INTENSITY

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

A six inch diameter superbright, superior high intensity, viewing area for reading industrial films. These viewers come with an on/off foot switch and a set of steel masks to reduce the
size of the viewing area. A variable intensity electronic control allows you to adjust the brightness of
the 500 watt photoflood bulb. These illuminators are power air cooled.
The model 185 I, in addition to the above, has an adjustable iris which cones down the viewers
light source for reading smaller film areas.
EXTERIOR DIMENSIONS: 9” Wide 18” High 14” Deep
approx. shipping weight:
185 - 29 lbs
185 I - 30 lbs.
Finish: Light Gray baked enamel (on cold rolled steel)
Electrical: Viewers operate on 120 volt, 60 Hz, 5 Amp AC. Supplied with a 6’ three conductor line cord. For
special voltages consult factory.

186 HIGH INTENSITY
FLUORESCENT
Ten 15 watt fluorescent bulbs mounted in a special reflector system produce an extremely bright even
illumination for viewing industrial films. The three position toggle switch allows you to choose
full brightness, activate the electronic intensity control or turn the unit off. The stepless electronic
variable intensity control gives full range of illumination. A stainless steel gravity grip extending the full
width of the 14”x17” plexiglass viewing panel holds the film firmly in place.
EXTERIOR DIMENSIONS: 15.5” Wide / 24.25” High /10” Deep
approx. shipping weight 52 lbs.
Finish: Light gray baked enamel (on cold rolled steel)
Electrical: Viewers operate on 120 volt, 60 Hz, 186 - 3.5 Amp AC 189 - 15 Amp AC. Supplied with a 6’ three
conductor line cord.

189 HIGH INTENSITY
PHOTOFLOOD
Three number 2 - 500 watt photoflood bulbs provide extremely bright even illumination for
viewing industrial films. Heat is dissipated by a powerful blower, with a removable fiberglass dust
filter, and a heat absorbing glass filter. An on/off toggle switch and a continuous stepless electronic control
provide variable intensity lighting. The 14”x17” viewing surface is white translucent plexiglass.
Four lift up film clips across the top edge of the viewer hold film firmly in place.
EXTERIOR DIMENSIONS: 16.5” Wide / 27.5” High / 20” Deep
approx. shipping weight 127 lbs.
Finish: Light gray baked enamel (on cold rolled steel)
Electrical: Viewers operate on 120 volt, 60 Hz, 186 - 3.5 Amp AC 189 - 15 Amp AC. Supplied with a 6’ three
conductor line cord.

187A 4.5” x 17”
HIGH INTENSITY
Designed for industrial radiography. Four number 1
photoflood bulbs provide 1000 watts of brightness. An internal
heat absorbing glass protects film from heat damage. The cooling
system utilizes a power driven air supply with replaceable air filters. The electronic brightness control and a built in low light
level writing light are mounted at the front of the viewer. This illuminator comes with an on/ off foot switch and a set of four steel
masks for reading 4.5”x10”, 3.5”x17”, 3.5”x10” or 70mm film.

EXTERIOR DIMENSIONS:

24” Wide

10” High

10” Deep

approx. shipping weight: 35 lbs.

Finish: Light Grey baked enamel (on cold rolled steel)
Electrical: Viewers operate on 120 volt, 60 Hz, 9 Amp AC. Supplied with a 6’ three conductor line cord. For special voltages consult factory.
B - 26

DENTAL SINGLE MOUNT
ILLUMINATOR

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

The finest Dental Film Illuminator available. Designed to accommodate oblong films in a 4.5”x13” viewing area. Two stainless steel roller
clips are mounted at the top to hold film firmly. One F14T8/D 14 watt
fluorescent bulb provides illumination thru the plexiglass viewing panel.
Units are available for wall, desk, or recessed mounting.
SURFACE MOUNTED MODELS
DEPTH OF VIEWE RS: 5.25”
EXTERIOR DIM

4.5”x13”

16.25”

CATALOG NO.

APPROX. BAKED STAINLESS
SHIP WT ENAMEL STEEL

VIEWING AREA WI DTH H GT

7”

8 lbs

250A

250B

RECESSED MODELS
VIEWING AREA

ALL M EASUREMENTS ARE ± 1/16”

4 . 5 ” x 13 ”

CATALOG NO.
RECESS DIM
APPROX. BAKED STAI NLESS
WALL OPENING
WIDTH H GT D EPTH S HIP WT ENAMEL STEEL

15.25” 5.875” 3.25”

8 lbs

250

250S

Finish: White baked enamel or stainless steel fronts
Electrical: Viewers operate on 120 volt, 60 Hz, .75 Amps AC per viewing area. Supplied with a 6’ three conductor line cord.

DENTAL TWIN MOUNT ILLUMINATOR
Solid, quality construction separates us from our competitors. Ideal for large mount
dental film or viewing two sets of film at one time. Two F14T8/D 14 watt fluorescent bulbs
and one piece plexiglass panel provide optimal viewing. Two stainless steel roller clips
at the top of the viewer and two at the bottom hold film firmly in place. Wall, desk or
recessed models.
SURFACE MOUNTED & DESK MODELS
DEPTH OF VIEWE RS: 3.25”
EXTERIOR DIM

VIEWING AREA WIDTH HGT

8”x13”
10”x12”

CATALOG NO.
APPROX. BAKED STAINLESS
SHIP WT ENAMEL STEEL

15.125” 13.125” 10 lbs
15.125” 13.125” 14 lbs

251
251A

253S
251B

RECESSED MODELS

RECESS DIM
CATALOG NO.
APPROX. BAKED STAI NLESS
WALL OPENING
HGT D EPTH SHIP WT ENAMEL STEEL

VIEWING AREA WIDTH

8 ” x 13 ”
10 ” x 12 ”

15.375” 13.375” 3.625” 10 lbs
15.375” 13.375” 3.625” 14 lbs

252
252A

253
253A

ALL M EASUREMENTS ARE ± 1/16”

Finish: White baked enamel or polished stainless steel fronts
Electrical: Viewers operate on 120 volt, 60 Hz, .75 Amps AC per viewing area. Supplied with a 6’ three conductor line cord.

4.5” X 17” ILLUMINATOR
An inexpensive yet excellent viewer for reading
strip or mounted film up to 4.5”x17”. Viewers
are mounted in a swivel base and can be set on
a desk or mounted on a wall. Two F15T8/D 15
watt fluorescent bulbs produce bright even light
thru a plexiglass viewing panel.
SURFACE MOUNTED MODELS
DEPTH OF VIEWE RS: 5.25”
EXTERIOR DIM

VIEWING AREA WI DTH H GT

4.5”x17”

18.5”

8”

APPROX. CATALOG
SHIP WT
NO.

15 lbs

184

ALL M EASUREMENTS ARE ± 1/16”

Finish: White baked enamel
Electrical: Viewers operate on 120 volt, 60 Hz, .75 Amps AC per viewing area. Supplied with a 6’ three conductor line cord.

B - 27

ECONOMY ILLUMINATOR

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

Although this illuminator has a budget price it is made with the same care found
in higher priced models. It is constructed of heavy gauge steel and comes with an
on/off switch, plexiglass viewing panel, four stainless steel spring action film clips and
a film retainer ledge. The 14”x17” viewing area is illuminated by two F15T8/D
daylight fluorescent bulbs.

DEPTH OF VIEWE RS: 5.375”
VIEWING AREA

EXTERIOR DIM APPROX. CATALOG
NO.
WIDTH
HGT SHIP WT

SingleBank 14”x17” 15.625” 18.25”

16lbs

200

ALL MEASUREMENTS A RE ± 1/16”

Finish: Light Grey baked enamel
Electrical: Viewers operate on 120 volt, 60 Hz, .75 Amps AC per viewing area. Supplied with a 6’ three conductor line cord. For special voltages consult
factory.

12” X 24” ILLUMINATORS
Designed to view three 8”x10” or two 10”x12” films at one time, this superior illuminator with built in reflectors and two F20T12/D daylight fluorescent bulbs produces bright even illumination. Surface and Recessed
models are all steel construction with your choice of Gravity Film Grips or
Spring Film Clip Holders .

SURFACE MOUNTED MODELS
DEPTH OF VIEWE RS: 5.25”

VIEWI NG AREA

SingleBank

CATALOG NO.

EXTERIOR D IM APPROX GRAVITY FILM
WIDTH
HGT S HI P WT
GRI P
CLI P

12”x24” 24.625”

13.5”

25lbs

254T

254

RECESSED MODELS
VIEWING AREA

CATALOG NO.

EXTERIOR D IM WALL OPENING APPROX GRAVITY FI LM
WIDTH
HGT WIDTH
HGT SHIP WT GRIP
CLI P

Single Bank 12”x24” 24.625” 13.5” 24.875” 13.75”

26 lbs

254RT

254R
ALL M EASUREMENTS ARE ± 1/16”

Finish: Light Grey baked enamel
Electrical: Viewers operate on 120 volt, 60 Hz, .75 Amps AC per viewing area. Supplied with a 6’ three conductor line cord. For special voltages consult
factory.

N E E D H E LP I N S E L ECT I N G TH E R I G HT I L L U M I NATO R F OR YO U R
A P P L I CAT I O N? CALL U S AT 800 - 347 - XR AY A N D WE’LL B E HAP PY TO
A S S I ST YO U !

B - 28

GENERAL INFORMATION

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

SINGLE TI ER
single bank
single tier

two bank
single tier

three bank
single tier

four bank
single tier

five bank
single tier

eight bank
single tier

six bank
single tier

TWO TIER
single bank
two tier

1 over1

two bank
two tier

2 over 2

three bank
two tier

four bank
two tier

five bank
two tier

3 over 3

4 over 4

5 over 5

six bank
two tier

eight bank
two tier

6 over 6

8 over 8

Standard cords are 6’ - 3 conductor NEMA 5 - 15P line cord.
Standard cord position: Lower right hand side when facing unit.
Standard Electrical: 120volts 60Hz AC
Switch type and position vary depending on models chosen.
All multiple bank units (up thru 6 bank) have one piece continuous plexiglass
8 bank units have two pieces of Plexiglas

each four banks long.

Optional cluster switches are available for all multiple bank single or two tier illuminators. (see page B-30 for details)

B - 29

OPTIONAL
ILLUMINATOR ACCESSORIES

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

CLUSTER SWITCH BOXES : Controls individual lighting in viewing sections from one central location. The Switch boxes are mounted on the bottom center of the illuminator (unless otherwise specified when ordering). For Illuminators three bank and larger switch boxes
have a master switch for each tier and individual switches for each section. Note: Not UL listed in all applications.
MUST BE FACTORY I NSTALLED (specify option when ordering)
STANDARD CONFIGURATION OF OPTIONAL CLU STER SWITCH BOXES
2 Bank

3 Bank

4 Bank

5 Bank

6 Bank

140083

140084

140085

140086

8 Bank

SINGLE
TIER
140082

2 over 2

140087

3 over 3

4 over 4

TWO
TIER
140082-2

140083-2

140084-2
6 over 6

5 over 5

140085-2

8 over 8

140086-2

140087-2

Individual Lighting Controls
Master Switch
CATALOG NO.
VIEWING APPROX STANDARD REMOTE
SHIP WT
AREA
(W/8’ CABLE)

2 Bank
3 Bank
4 Bank
5 Bank
6 Bank
8 Bank

5 lbs
5 lbs
5 lbs
5 lbs
5 lbs
5 lbs

140082
140083
140084
140085
140086
140087

CATALOG NO.
VIEWING APPROX STANDARD
REMOTE
AREA
SHIP WT
(W/8’ CABLE)

140092
140093
140094
140095
140096
140097

2 over 2
3 over 3
4 over 4
5 over 5
6 over 6
8 over 8

8 lbs
8 lbs
8 lbs
8 lbs
8 lbs
16 lbs

140082-2
140083-2
140084-2
140085-2
140086-2
140087-2

140092-2
140093-2
140094-2
140095-2
140096-2
140097-2

ELECTRICAL I NTERCONNECT: Multiconductor cable with male and female plug terminations for electrically interconnecting special
custom illuminator arrangements (i.e. for use with corner modules or hinge kit units)
Catalog # 140280

MUST BE FACTORY INSTALLED (specify option when ordering)

HOSPITAL GRADE P LUGS: Satisfies local electrical codes requiring a line plug that is designed for high abuse hospital environment.
CATALOG # 140281
# OF VIEWING

S ECTIO NS

OPERATING ROOM OPTION: Testing and selection of ballasts with the lowest possible leakage to ground. Ideal
for use with ground fault detection systems.
NOTE: Illuminators supplied with this option are not explosion proof.

S HELVES F OR SURFACE MOUNTED ILLUMINATORS: Custom built
3/4” thick formica shelf.
CATALOG # 68H

BRACKET FOR 68H: Optional bracket for mounting 68H custom shelves.
CATALOG #68H B

# 68H

Specify length and depth when ordering.

Consult factory for quantity needed

B - 30

# 68H B

1
2
3
4
5
6
8

CATALOG #

195 A
195 B
195 C
195 D
195 E
195 F
195 G

PBL WALL CASSETTE HOLDERS

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

SOLID STATE INTE RFACE LOGIC
COUNTERBALANCED - ONE HAND OPERATION
3 OR 4 S IZE FORMATS
LEFT OR R IGHT HAND L OAD
32”, 44” OR 56” TRAVEL

These certified wall cassette holders are designed for the heavy
duty use of a large hospital but priced to satisfy the small radiology department. Built-in PBL compatibility is automatic and
instantaneous. The unique S&S flipper design makes changing
cassette sizes nearly effortless.
Sturdy box girder construction, nylon bearings, dual lock system, constant torque counterbalances and chrome plated steel
tubes give these cassette holders their unique quality.
These cassette holders are easy to use. A cassette simply slides
into the track, and it’s ready. Height can be adjusted from either
the right or left side with one hand; the counterbalances do the
work. Cassette sizes can easily be changed by lifting one of the
flippers and sliding in a new cassette. As the cassette slides into
place, it passes across several ball activated microswitches in the
bottom track.
Each cassette size sets up its own circuit path and, in conjunction
with a built-in solid state interface, sets the collimator for the cassette in use. [Important Note: CASSETTE HOLDERS ARE SUPPLIED
W HEN ORDERING PLEASE SPECIFY NAME AND TYPE OF COLLI MATOR BEING USED .] No exposure will be permitted if the cassette
is not fully inserted or if an unauthorized size is inserted.
Adjustable grid channels are provided to allow use of a 14”x17”
(15”x18” OD) stationary grid.
COMPLETE WITH INTERFACE LOGIC FOR MOST TYPES OF COLLIMA
TORS.

Finish: light grey baked enamel.

PBL WALL CASSETTE HOLDER
CASSETTE FORMAT
RIGHT HAND L OADING

14x17”
14x17”
14x17”
14x17”
14x17”
14x17”
14x17”
14x17”
14x17”

17x14”
17x14”
17x14”
17x14”
17x14”
17x14”
17x14”
17x14”
17x14”

10x12”
10x12”
8x10”
10x12”
10x12”
8x10”
10x12”
10x12”
8x10”

DEPTH : 7.25”

EXTERIOR DIM.
TRAVEL WIDTH H GT

8x10”

APPROX. CATALOG
SHIP WT
NO.

32”
32”
32”
44”
44”
44”
56”
56”
56”

21”
21”
21”
21”
21”
21”
21”
21”
21”

61”
61”
61”
73”
73”
73”
85”
85”
85”

60 lbs
62 lbs
54 lbs
67 lbs
67 lbs
65 lbs
76 lbs
76 lbs
76 lbs

222210
222450
222410
222220
222470
222430
222221
222471
222431

32”
32”
32”
44”
44”
44”
56”
56”
56”

21”
21”
21”
21”
21”
21”
21”
21”
21”

61”
61”
61”
73”
73”
73”
85”
85”
85”

62 lbs
60 lbs
54 lbs
65 lbs
67 lbs
65 lbs
76 lbs
76 lbs
76 lbs

222230
222460
222420
222240
222480
222440
222241
222481
222441

LEFT HAND L OADING

14x17”
14x17”
14x17”
14x17”
14x17”
14x17”
14x17”
14x17”
14x17”

This cassette holder is certified equipment. It can be
used in certified or non-certified installations when
installer complies with appropriate regulations.

17x14”
17x14”
17x14”
17x14”
17x14”
17x14”
17x14”
17x14”
17x14”

10x12”
10x12
8x10”
10x12”
10x12,
8x10”
10x12”
10x12”
8x10”

8x10”

MAXIMUM OPENING FOR GRID - .312”

C-1

WALL CASSETTE HOLDERS

8 0 0 / 3 4 7 - X R AY

FOR USE WITH NON-PBL SYSTEMS ✶

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

EXTRA HEAVY DUTY
COUNTERBALANCED - ONE HAND OPERATION
ADJUSTABLE F OR CASSETTE SIZES UP TO 14”x17” OR 14”x36”
LOAD FROM EITHER SIDE

These Extra Heavy Duty deluxe cassette holders are designed to
accommodate any size cassette up to 14”x17”(222070) or 14”x36”
(222070M)
Simple, durable and cost effective, these wall cassette holders are
certified for use in general purpose x-ray rooms that do not have
PBL (positive bean limitation) capability.
Heavy duty box girder construction is used for the cassette holder carriages and the top wall mounting bracket.
Heavy gauge chrome plated steel tubes provide a smooth nonbinding surface for the nylon carriage bearings. Constant torque
counterbalancing springs allow effortless vertical movement. The
dual locking system enables the operator to adjust the vertical
positioning of the cassette carriage with one hand from either side
of the patient.
Both models are equipped with adjustable grid channels to accept
a stationary grid.
The 222070 has a maximum vertical travel of 47” when a 14”x17”
cassette is used and the 222070M has a maximum vertical travel
of 28” when a 14”x36” cassette is used.

✶Important Note:
REGULATIONS REQUIRE THAT THESE CASSETTE HOLDERS BE REMOVED
PBL BE ADDED TO SYSTEM AT A LATER DATE.

FROM SERVICE SHOULD

Finish: light grey baked enamel with chrome plated steel tubes.

WALL MODEL EXTRA HEAVY DUTY CAS SETTE HOLDER
CASSETTE FORMAT

5x7” thru 14 x 17 ”
5x7” thru 14 x 36 ”

EXTERIOR DIM.
TRAVEL WIDTH H GT
D EPTH

47”
28”

21”
21”

72”
72”

6”
6”

APPROX. CATALOG
NO.
SHIP WT

70 lbs
70 lbs

222070
222070M

MAXIMUM OPENING FOR GRID - .312”

C-2

WALL & FLOOR
CASSETTE HOLDERS

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS

FOR USE WITH NON-PBL SYSTEMS

w w w . s s x ra y. c o m

✶

COUNTERBALANCED - ONE HAND O PERATION
CHOICE OF WALL OR FLOOR MODELS
ADJUSTABLE FOR ALL CASSETTE SIZES
LOAD FROM EITHER SIDE

Here are simple, cost effective wall cassette holders certified for use in
general purpose x-ray rooms that do not have PBL (Positive Beam
Limitations) capability.
These counterbalanced, effortless all steel cassette holders are designed
for ease of movement and finger tip adjustments. All models are supplied
with a chin rest and a positive locking system.
Models 130A and 132 are adjustable to accept cassette sizes from 5”x7”
up to 14”x17”. The model 131A will accept all sizes up to 14”x36”. All
models also have independent adjustable grid channels.
The Floor Model Cassette Holder
(model 132) uses model 130A mounted to a
sturdy chrome plated steel vertical column
and secured to a base constructed of heavy
gauge steel with a non-slip rubber top. The
base measures 14”W. x 19”L. x 2.5” H. The
overall height of the complete unit is 73”.

✶Important Note:
REGULATIONS

REQUIRE THAT THESE CAS

SETTE HOLDERS BE REMOVED FROM SERVICE
SHOULD

PBL

BE ADDED TO SYSTEM AT A

LATER DATE.

No. 130A Shown with option 133

No. 132 Floor Model Cassette Holder

WALL MODEL CASSETTE HOLDER
CASSETTE FORMAT

5x7” thru 14 x 17 ”
5x7” thru 14 x 17 ”

EXTERIOR D IM.
TRAVEL WIDTH HGT

22”
33”

14.5”
14.5”

FLOOR MODEL CASSETTE HOLDER OVERALL H EIGHT: 73”

DEPTH: 5”

47”
66”

APPROX. CATALOG
NO.
SHIP WT

15 lbs
24 lbs

CASSETTE FORMAT

5x7” thru 14 x 17 ”

130A
131A

B a s e Dim.

MAXIMUM OPENING FOR GRID - .562”

EXTERIOR DIM.
TRAVEL WIDTH HGT

22”

14.5”

47”

DEPTH WIDTH

HGT

19.25” 13.75”

2.5”

APPROX. CATALOG
SHIP WT
NO.

70 lbs.

MAXIMUM O PENING FOR GRID - .562”

Finish: light grey baked enamel with chrome plated steel tubes.
Optional Items: 133: A convenient height scale to assist in aligning X-Ray tube to cassette. (for model 130A only) (approx. ship. wt. 6 lbs.)

C-3

132

14”x36” HEAVY DUTY WALL
CASSETTE HOLDERS

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

CERTIFIED FOR USE WITH ALL X-RAY SYSTEMS
EXTRA HEAVY DUTY CONSTRUCTION
COUNTERBALANCED - DUAL LOCK SYSTEM
24” OR 38” TRAVEL
LOAD FROM EITHER SIDE

Designed specifically for 14”x36” cassettes, this heavy duty cassette holder is unequaled in construction and performance. Heavy duty box girder construction is used for the cassette holder carriage and
the top and bottom wall mounting brackets. Heavy gauge chrome plated steel tubes provide a smooth
non-binding surface for the nylon carriage rollers.
Constant torque counterbalancing springs allow effortless vertical movement. The dual locking system
enables the operator to adjust vertical positioning of the cassette carriage with one hand from either
side of the patient. Adjustable grid channels are provided to accept a stationary grid.
Two lengths of travel are available. The standard length is 24”. For weight bearing studies we manufacture the 38” extended travel model.
Finish: light grey baked enamel.
WALL MODEL EXTRA HEAVY DUTY CAS SETTE HOLDER
CASSETTE FORMAT

EXTERIOR DIM.
TRAVEL WIDTH HGT

14 ” x 36 ”
14 ” x 36 ”

24”
38”

21”
21”

D EPTH

71”
85”

7.25”
7.25”

APPROX. CATALOG
NO.
SHIP WT

80 lbs
90 lbs

222080
222090

MAXIMUM OPENING FOR GRID - .25”

MOTORIZED CASSETTE HOLDERS
EFFORTLESS POSITIONING OF HEAVY CASSETTES
TWO SPEED MOTOR
ELECTRONIC DIGITAL HEIGHT SCALE
AVAILABLE FOR 14” x 51” OR 14” x 36” CAS SETTES
LOAD FROM EITHER SIDE

Effortless positioning of the cassette in this motorized cassette holder is achieved by simply pressing the buttons that operate the two-speed motor to raise or lower it. The high speed permits fast
positioning, the low speed allows fine adjustment. At a point three inches from the floor it stops
to enable the operator to set the lower speed to continue to the floor slowly to avoid collisions.
This allows an image to be taken from the floor up. The extra long travel achieves a maximum
height of 83” above the floor.
This unique cassette holder is equipped with an electronic digital height scale, which is switchable
between inches and centimeters, to further simplify its use.
Finish: light grey baked enamel.

MOTORIZED CASSETTE HOLDER
CASSETTE FORMAT

14 ” x 51 ”
14 ” x 36 ”

EXTERIOR DIM.
APPROX. CATALOG
TRAVEL WIDTH HGT
DEPTH SHIP WT
NO.

83”
83”

21.125”
21.125”

83”
83”

7
7

230 lbs
230 lbs

222110
222120

MAXIMUM OPENING FOR GRID - 312”

Optional Items: 474-1451 Cassette Adapter: Allows a 2 22110
(14”x51”Cassette Holder) to accept a 14”x36” cassette - see page C - 7
C-4

X-ALMOR TABLE TOP
CASSETTE HOLDER

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

DESIGNED FOR CROSS TABLE WORK
LIGHT IN WE IGHT
STURDY CONSTRUCTION
EASY TO USE

These strong table top holders are ideal for myelograms, skulls,
AP-PA pelvic x-ray exams, and other cross-table examinations.
The 490 will accept any size cassette thru 14”x17”x.75” thick.
The 490EW has extra wide 1” channels for use with a stationary
grid.
Both models have top stainless steel cassette channel guides that
lift vertically to allow easy removal or insertion of cassettes.
Stability is provided by the large aluminum base (12”x18”) and
sturdy design.
Finish: light grey baked enamel.

TABLE TOP CASSETTE HOLDER
APPROX SHIP WT

10 lbs
10 lbs

CATALOG NO.

49 0
490EW

X-ALMOR WALL CASSETTE HOLDERS
FOR USE WITH NON-PBL SYSTEMS ✶
ADJUSTABLE FOR CASSETTES UP TO 14” x 17”
COUNTERBALANCED - ONE HAND O PERATION
LOAD FROM EITHER S IDE

Model 425 is an adjustable wall cassette holder that will accept all cassette sizes up to
14”x17”. Contoured chin rest, grid channels, counterbalanced vertical travel and a positive
locking knob are standard features in the model.
Sturdy all metal construction includes cast aluminum wall mounting brackets, stainless
steel vertical travel rods and a heavy gauge steel cassette carriage.

✶Important Note:
REGULATIONS REQUIRE THAT THESE CASSETTE
PBL BE ADDED TO SYSTEM AT A LATER DATE.

HOLDERS BE REMOVED FROM SERVICE SHOULD

Finish: light grey baked enamel.
Optional Item: Cat. No. 605: Five foot stainless steel rods for additional travel.

WALL MODEL CASSETTE HOLDER
CASSETTE FORMAT

Up to 14 ” x 17 ”

APPROX. CATALOG
EXTERIOR DIM.
TRAVEL WIDTH
HGT DEPTH SHIP WT
NO.

19.5”

17”

MAXIMUM OPENING FOR G RID - .187”

C-5

37”

5.5”

18 lbs

425

X-ALMOR MOBILE FLOOR STAND
CASSETTE HOLDER

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

IDEAL FOR PORTABLE X-RAYS
COUNTE RBALANCED - ONE HAND O PERATION
ADJUSTABLE FOR MOST CASSETTE SIZES

These mobile floor stand cassette holders are ideally suited for use with portable X-Ray units. The
475 cassette holder will accommodate all cassette sizes from eight to seventeen inches in either direction. The 475M is designed to accept all cassette sizes up to a 14”x36”.
The sturdy floor stand is constructed of heavy gauge steel with a cast aluminum top and base. Wheels
mounted to the rear of the base provide complete mobility when the stand is tilted backwards.
Leveling screws are provided to assure firm floor contact for complete stability when unit is in use.
Features include: a chin rest, vertical counterbalancing, adjustable cassette channels, vertical lock,
stainless steel vertical travel rods and grid channels for a stationary grid.

Finish: light grey baked enamel.

MOBILE FLOOR STAND CAS SETTE HOLDER
CASSETTE FORMAT

8 x 10” thru 14 x 17 ”
8 x 10” thru 14 x 36 ”

EXTERIOR DIM.
DEPTH
TRAVEL WIDTH H GT OF BAS E

42”
23”

15”
15”

69.75”
69.75”

22.75”
22.75”

APPROX. CATALOG
NO.
SHIP WT

110 lbs
110 lbs

475
475M

MAXIMUM OPENING FOR GRID - .187”

X-ALMOR MOBILE TILTING CASSETTE HOLDER
HOLDS CASSETTES IN ANY POSITION
MULTIPLE APPLICATIONS
COUNTERBALANCED - ONE HAND O PERATION
ADJUSTABLE FOR MOST CASSETTE SIZES (UP TO 14x17”)
LOAD FROM EITHER SIDE

The 480 mobile tilting cassette holder is designed to go anywhere and hold a cassette in any position.
Features include: 58” vertical counterbalanced travel, 1800 tilt capability, 3600 rotation, telescopes
to a forward extension of 22”, accepts cassette sizes up to 14”x17”, chin rest, a positive locking system and channels for a stationary grid.
The mobile stand is constructed of heavy gauge steel with a cast aluminum body and stainless steel
vertical travel rods. The base which measures 16.5” wide and 24” deep is mounted on a set of hard
rubber casters which provide complete mobility. A brake system on the rear casters allows the
holder to be locked after positioning.
Finish: light grey baked enamel.

MOBILE TILTING FLOOR STAND CASSETTE HOLDER
CASSETTE FORMAT

8 x 10” t hru 14 x 17 ”

EXTERIOR DIM. DEPTH
TRAVEL WIDTH H GT OF BAS E

58”

16.5”

64.5”

24”

APPROX. CATALOG
NO.
SHIP WT

129 lbs

MAXIMUM OPENING FOR GRID - .187”

C-6

480

X-ALMOR PORTABLE HANG ON
CASSETTE HOLDER

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

FOR USE WITH NON PBL SYSTEMS ✶
FITS MOST WALL MOUNTED BUCKYS
ALL STAINLESS STEEL CONSTRUCTION
ADJUSTABLE FOR MOST CASSETTE SIZES
LOAD FROM EITH ER SIDE

The 460 portable hang on cassette holder will fit most vertical wall mounted
buckys. With the Hang On Cassette Holder positioned on the front panel of the
bucky, non-bucky exposures can be made.
To use simply hang the top mounting bracket of the holder over the top of the
bucky. There is no need for tools or fasteners of any kind. With the holder in position on the front panel of the bucky, the top cassette channel lifts vertically to
allow easy removal or insertion of 8”x10” to
14”x17”cassettes. If required, permanently
mounted grid channels will accommodate a stationary grid. The entire unit is constructed of
polished stainless steel.
SPECIFY DEPTH OF BUCKY WHEN

ORDERING

The 460 Hang on adapter is to be used only as a
portable device.

✶Important Note:
REGULATIONS

REQUIRE THAT THESE CASSETTE

HOLDERS BE REMOVED FROM SERVICE SHOULD

PBL BE

ADDED TO SYSTEM AT A LATER DATE.

Finish: polished stainless steel.
460 PORTABLE HANG ON CASSETTE HOLDER
CASSETTE FORMAT

8 x 10” t hru 14 x 17 ”

EXTERIOR DIM.
WIDTH H GT
D EPTH

18”

20.75”

4.375”

APPROX. CATALOG
NO.
SHIP WT

10 lbs

460

MAXIMUM OPENING FOR GRID - .187”

X-ALMOR 14”X36” ADAPTER SERIES
PORTABLE
CONVERTS MOST CASSETTE HOLDERS
ALUMINUM/STEEL CONSTRUCTION
GRID CHANNELS
LOAD FROM EITHER SIDE

This series enables your present cassette holder (or bucky) to accept a 14”x36” cassette and grid.
The 474 is constructed of aluminum upright supports with glides which will fit most cassette holders. Simply set your holder for a 14”x17” cassette and slide the adapter into your holder as you
would a cassette. Grid channels which will accept a 14”x36” stationary grid of .187” maximum
thickness are built into the adapter.
The 474-1451 is the same as above but adapts our 222110 motorized 14”x51” cassette holder to
accept 14”x36” cassette and grid.
The 474M is constructed of aluminum with steel brackets for hanging on to the front of a 14”x17”
bucky.
SPECIFY DEPTH

OF BUCKY WHEN ORDERING .

Finish: white.

14”x36” ADAPTER
FOR

14 x 17” Ca sse t te Holder
14 x 51” Cass e t t e Holder
14 x 17” Buck y
No. 474

C-7

EXTERIOR DIMENSIONS
WIDTH H GT
D EPTH

15”
15”
15”

37.5”
37.5”
37.5”

3.25
3.25
ADJ

APPROX. CATALOG
NO.
SHIP WT

12 lbs
15 lbs
12 lbs

474
474-1451
474M

ALUMINUM INTERSPACED GRIDS

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS

PROVIDES EXCELLENT DIAGNOSTIC CLARITY

w w w . s s x ra y. c o m

WIDE SELECTION OF TYP ES, RATIOS AND F OCAL RANGES
SUPERIOR CONSTRUCTION AND ALI GNMENT
FOR STATIONARY OR BUCKY APPLICATION

The finest materials, quality craftsmanship and superior construction combine to make these grids one of the finest grid products
available. Select from 85 lines or 103 lines per inch models with a choice of focal ranges and ratios.

85 LINE STATIONARY GRIDS
FILM SIZE RATIO

26-32”

34-44”

48-72”

FOCUS

PARALLEL
FOCUS

103 LINE STATIONARY GRIDS
FILM SIZE RATIO

26-32”

34-44”

48-72”

FOCUS

PARALLEL
FOCUS

8”x10”
10”x12”
11”x14”
14”x14”
14”x17”
14”x36”

6:1
6:1
6:1
6:1
6:1
6:1

356121
356321
356421
356521
356621
356721

356122
356322
356422
356522
356622
356722

356123
356323
356423
356523
356623
356723

356124
356324
356424
356524
356624
356724

8”x10”
10”x12”
11”x14”
14”x14”
14”x17”
14”x36”

6:1
6:1
6:1
6:1
6:1
6:1

357121
357321
357421
357521
357621
357721

357122
357322
357422
357522
357622
357722

357123
357323
357423
357523
357623
357723

357124
357324
357424
357524
357624
357724

8”x10”
10”x12”
11”x14”
14”x14”
14”x17”
14”x36”

8:1
8:1
8:1
8:1
8:1
8:1

356131
356331
356431
356531
356631
356731

356132
356332
356432
356532
356632
356732

356133
356333
356433
356533
356633
356733

356134
356334
356434
356534
356634
356734

8”x10”
10”x12”
11”x14”
14”x14”
14”x17”
14”x36”

8:1
8:1
8:1
8:1
8:1
8:1

357131
357331
357431
357531
357631
357731

357132
357332
357432
357532
357632
357732

357133
357333
357433
357533
357633
357733

357134
357334
357434
357534
357634
357734

8”x10”
10”x12”
11”x14”
14”x14”
14”x17”
14”x36”

10:1
10:1
10:1
10:1
10:1
10:1

356141
356341
356441
356541
356641
356741

356142
356342
356442
356542
356642
356742

356143
356343
356443
356543
356643
356743

356144
356344
356444
356544
356644
356744

8”x10”
10”x12”
11”x14”
14”x14”
14”x17”
14”x36”

10:1
10:1
10:1
10:1
10:1
10:1

357141
357341
357441
357541
357641
357741

357142
357342
357442
357542
357642
357742

357143
357343
357443
357543
357643
357743

357144
357344
357444
357544
357644
357744

8”x10”
10”x12”
11”x14”
14”x14”
14”x17”
14”x36”

12:1
12:1
12:1
12:1
12:1
12:1

356151
356351
356451
356551
356651
356751

356152
356352
356452
356552
356652
356752

356153
356353
356453
356553
356653
356753

356154
356354
356454
356554
356654
356754

8”x10”
10”x12”
11”x14”
14”x14”
14”x17”
14”x36”

12:1
12:1
12:1
12:1
12:1
12:1

357151
357351
357451
357551
357651
357751

357152
357352
357452
357552
357652
357752

357153
357353
357453
357553
357653
357753

357154
357354
357454
357554
357654
357754

Overall dimensions of above grids are one inch greater than film size. Lead strips run parallel to long dimension.

85 LINE BUCKY GRIDS
OVERALL
DIM.

6:1

8:1

RATIO

17.25”x17.75” 358001
17.25”x18.875” 358005

358002
358006

10:1

103 LINE BUCKY GRIDS
RATIO

RATIO

12:1

FOCAL
RANGE

17.25”x17.75” 359001 359002
358003 358004 Specify on order
358007 358008 Specify on order
17.25”x18.875” 359005 359006
Lead strips run parallel to short dimension of Bucky Grids.

359003
359007

359004
359008

Specify on order

RATIO

12:1

RATIO

FOCAL
RANGE

OVERALL
DIM.

6:1

RATIO

8:1

10:1

DELUXE CALIPERS

SMOOTH SLI DE POINTER ASSEMBLY
UNIQUE NON-SLIP D ESIGN
EASY TO READ I NCH/CENTIMETER SCALE
HEAVY DUTY ALUMINUM CONSTRUCTION

Deluxe Calipers feature smooth sliding pointer assemblies to facilitate adjustments during thickness measurements. Two pointers
clearly indicate readings. A unique friction assembly design provides non-slip firm holding action to set and retain measurement.
Bold easy to read black embossed caliper scale is calibrated in both inches and centimeters. The 169B reads from 0” to16” and
0cm to 40cm. Sturdy 3/16” aluminum construction provides the strength needed to withstand frequent use and hard wear.
The larger model (169C) features a specially designed base that can easily slip under a patient who is lying flat on a table and
reads from 0” to 24” and 0cm to 61cm.

169B - Heavy Duty Calipers
169C - Extra Large Calipers

Specify on order

approx. shipping Wt. - 2 lbs.
approx. shipping Wt. - 4 lbs.
C-8

EMERGENCY CARTS

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

LIGHTWEIGHT ALUMINUM CONSTRUCTION
PROOF-OF-ENTRY SEAL
INTERNALLY MOUNTED DEFIBRILLATOR SWING-ARM AND I.V. POLE
CARDIAC BOARD AND BRACKET

The EMC1 Emergency Cart has been designed for quick and easy maneuverability, from its lightweight aluminum frame to the casters that roll comfortably over carpeted as well as non-carpeted floors. Perimeter bumpers protect the cart from damage. The molded ABS plastic top ensures long-lasting wear and is easy to clean,
while the raised lip and sides contain spills and serve as cart handles. The EMC1
provides maximum storage capacity via two 3-inch drawers, one 6-inch drawer and
two 9-inch drawers. Full-extension drawer slides ensure that all the contents of each
drawer are visible and accessible. Drawer contents can be organized to fit your
needs with aluminum and plastic dividers. Dividers for 6” or 9” drawers can be
arranged to create up to nine compartments per drawer.
EMERGENCY FEATURES:
Standard defibrillator swing -arm can be rotated a full 360 0 to expose the Emergency
Cart’s work surface for other instruments. Because the arm is internally mounted,
cart stability is maintained even when a defibrillator is in use.
The I.V. pole is secured internally for strength and stability. The pole’s height is
adjustable for maximum flexibility.
EMC1- I.V. Pole, Oxygen tank bracket, Defibrillator swing arm, Four 5”
Casters (one with brake and one with locking swivel).
Drawers:
2 - 3”deep with one divider set,
1 - 6” and 2 - 9” deep with 1 set of dividers.
Overall cart size: 271/2”W.x22”D.x42 1/2”H.
Approx. shipping wt. 210 lbs.

The oxygen tank bracket is mounted within the recessed side to eliminate interference
with connections and to protect the tank from damage as the cart is moved about.
Cardiac board slides easily out of brackets on the back of the cart for fast removal.
The proof-of-entry flap accommodates a variety of breakaway security seals, thus
allowing quick access to cart contents.
A braking caster ensures that the Emergency Cart won’t shift during procedures.

Finish: Agean Blue

Shown for EMC1 - 3” deep drawer with 2 vertical aluminum and 5 adjustable plastic
dividers. Vertical plastic dividers are used for
the UC1

3” deep drawer accepts
standard exchange trays.

UTILITY CARTS

Shown for EMC1 - 2 vertical and 2 horizontal aluminum
dividers for 6” and 9” deep drawers. Create up to 9 compartments per drawer. Plastic dividers are used for the UC1

SMALL FOOTPRINT WITH MAXIMUM STORAGE CAPACITY
SERVES M ULTIPLE USES
FULL-ACCESS DRAWERS
DURABLE STE EL BODY

The UC1 is a versatile Utility Cart that can serve in several capacities, such as supplies cabinet, treatment cart, bedside cart, or procedures support. The cart’s compact design allows it to be placed in
tight spots, yet its large drawers provide ample storage capacity. Cart contents are secured with a
barrel lock.

UC1- Four 4” Casters (two locking).

The UC1 provides maximum storage capacity via one 3-inch drawer, two 6-inch drawers and one
9-inch drawer. Full-extension drawer slides ensure that all the contents of each drawer are visible
and accessible. Drawer contents can be organized to fit your needs with plastic divider sets.

Drawers:
1 - 3”deep with a divider set,
2 - 6” and 1 - 9” deep with with 1 set of
dividers.
Overall cart size: 25 1/2”W.x181/2”D.x34”H

A protective bumper around the base ensures the UC1 won’t damage other equipment, while its
steel frame promises years of durable use. The molded ABS plastic top provides long lasting wear.
A raised lip ensures that spills are contained on the top for quick clean up. The 4” casters include
two directional locks for enhanced maneuverability.

Approx. shipping wt. 140 lbs.

Finish: Sandstone Beige
D-1

WALL-MOUNTED CONTRAST
CABINETS

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

SPACE-SAVER
CONTENTS S ECURED

Model CM10 Wall-Mounted Contrast Cabinet keeps contrast media accessible yet secure, while
also saving valuable space in the radiology suite.
The cabinet has two fixed metal shelves to hold contrast media supplies. A latch-lock provides
reliable security. When the cabinet is open, the door can be used as a sturdy work surface.
The durable steel construction and powder-coated finish ensure years of service. With its compact design, the Contrast Cabinet can be attached to any wall without interfering in department
activities.

Finish: Sandstone Beige

CM10- Wall-Mounted Contrast Cabinet
Overall size: 17”W.x71/8”D.x171/4”H.
Approx. shipping wt. 45 lbs.

CONTRAST & PHARMACEUTICAL
TABLETOP CABINETS
SMALL FOOTPRINT
SECURES CONTENTS
VERSATILE USE
With its small footprint, the CM20 and the CM30 Tabletop Cabinets can be conveniently placed in the examination room. Contents are secured via a key-lock system
(CM20) or an electronic locking feature (CM30) that eliminates the need for keys.
Made of aluminum and steel with a powder-coated finish, these Tabletop Cabinets
resist the dings and scratches caused by everyday use.
The cabinets contain one 6-inch storage drawer for large supplies and two cassettes.
One cassette contains eight 4.125 inch wide drawers and one cassette contains six 5.5
inch wide drawers for medications and small supplies. The cassettes and drawers are
removable for quick exchange at the pharmacy. Drawer contents can be organized
with the divider sets: a six piece steel set for the storage drawers plus a pack of 100
dividers per cassette.
The CM30 with electronic locking system eliminates the need for keys. Cabinet contents
are accessed through up to two entry codes. Codes can be programmed to any number between three and eight digits. The Cabinet can be programmed to re-lock
between six seconds and one hour. A key lock is also incorporated into the cabinet
for system override.

Finish: Sandstone Beige

D-2

Shown: CM30- with electronic lock
Overall size: 19 5/8”W.x227/8”D.x237/8”H.
Approx. shipping wt. 65 lbs.

MOBILE CASSETTE & FILM CARTS
CONTOURED PADDED HANDLES

FULL PERIMETER B UMPER

BACK SLOPED SHELVES

LOCKING SWIVEL CASTERS

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

These cassette and film carts are designed to withstand the demands of busy radiology departments. Made of cold rolled steel, with high
quality 5” polyurethane locking swivel casters, these sturdy carts are easy to maneuver.
Back sloped shelves, surfaced in non-marring plastic, prevent cassettes, film and envelopes from sliding off the cart. Full perimeter bumpers
protect walls and equipment from damage. The contoured padded handles on both sides of the cart make travel in any direction easy.
Finish: light grey baked enamel.

CFC 10 - 3 Compartments per shelf - Dividers are approx. 6.5” apart, the bottom
storage area is 19” high, the top storage area is 15.5” high and the top shelf is
20”x13.5”.
Overall cart size: 25”W.x18.5D.”x42.5H. approx. shipping wt. 128 lbs.

CFC 14 - Designed for heavy 14x36” or 14x51” cassettes. - 3 Compartments per
shelf - Dividers are approx. 4.25” apart, the bottom and middle storage areas are 16”
high. The long compartment, which is 7” wide, is designed for 14”x36” or 14”x51”
cassettes. A hinged latch lock gate prevents cassettes from falling out.
Overall cart size: 25”W.x18.5D.”x50.5H. approx. shipping wt. 150lbs.

CFC 16 - Film reading cart. 2 shelf cart with back-sloped shelves is designed to
stack films horizontally to allow easy accessibility to envelope markings for identifying films quickly. The bottom storage ares is 16” high, the top storage area is 15”
high. There is a padded handle across the back of the unit for easy moving.
Overall cart size: 26.75”W.x16.75”D.x40”H. approx. shipping wt. 86 lbs.

CFC 12 - 5 Compartments per shelf - Dividers are approx. 4” apart, the bottom
and middle storage areas are 15.75” high.
Overall cart size: 25”W.x18.5”D.x50.75H. approx. shipping wt. 170 lbs.

D-3

LEAD LINED STORAGE CHEST

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

LEAD LINED
DOUBLE WALL CONSTRUCTION
FOUR SIZES
MOBILE OR STATIONARY MODELS

Featuring rigid double steel construction with a 1/16” lead liner between
each wall, the unique design of these chests makes it impossible for
the lead liner to sag or shift. The liner is formed into the cover so that
when closed, positive x-ray protection is assured. The cover is mounted on a full length, heavy duty piano hinge for lasting service. There
are three handles on the chest, one welded to the lid and one on each
end. Heavy duty double race ball bearing casters provide ease of
mobility.
550, 550A and 551 are designed to hold cassettes up to 14”x17”.
553 is specifically designed for spot film cassettes and is partitioned
into two compartments.

The 553A is an optional high base with casters, designed specif ically for the 553, to eliminate stooping and bending. The base
with casters is 13.5” high bring the height of the chest to a comfortable 28.5”. Approx. ship. weight: 25Lbs.

550- Mobile lead lined medium capacity chest.

LEAD LINED STORAGE CHEST

Finish: light grey baked enamel.

CASSETTE S IZE

Up to 14x17”
Up to 14x17”
Up to 14x17”
Spot Film

DESCRIPTION

APPROX. CATALOG
INTERIOR DIM.
NO.
WIDTH LENGTH DEPTH SHIP WT

Medium capacity w/casters
8”
Large capacity w/casters
11.25”
Extra large cap acity w/casters 15”
Medium capacity
12”

19”
19”
19”
13.5”

16”
16”
16”
9”

90 lbs
120 lbs
147 lbs
53 lbs

550
550A
551
553

ALL STEEL STORAGE CHEST
ALL STEEL CONSTRUCTION
14”x17” AND 14”x36” MODELS
MOBILE OR STATIONARY MODELS

Constructed of 1/8” thick welded steel plate, these sturdy chests offer
economical x-ray protection in many situations. The cover is mounted on a heavy gauge full length piano hinge and overlaps the walls
of the chest to provide all around protection. There are three handles, one welded to the lid and one on each end of the chest. Mobile
models have 2” double race ball bearing casters.
552 and 552A are designed to hold cassettes up to 14”x17”.
552C and 552D are designed to hold cassettes up to 14”x36”.
Finish: light grey baked enamel.

ALL STEEL STORAGE CHEST
CASSETTE SIZE

Up to 14x17”
Up to 14x17”
Up to 14x36”
Up to 14x36”

DESCRIPTION

With Casters
Stationary
With Casters
Stationary

INTERIOR DIM.
APPROX. CATALOG
NO.
WIDTH LENGTH HEIGHT SHIP WT

8”
8”
8”
8”

19”
19”
36”
36”

16.5”
16.5”
16.5”
16.5”

50 lbs
50 lbs
100 lbs
100 lbs

552
552A
552C
552D
D-4

552A- Stationary all steel Storage Chest.

WALL MOUNT CATHETER CABINET

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

MAXIMUM CATHETER STORAGE FOR ALL S IZES & TYP ES
STORES CATHETER LE NGTHS UP TO 60”
FULLY ADJUSTABLE HORIZONTAL SPACING
VERTICAL SPACING ADJUSTABLE IN 2” INCREMENTS
HOLDS UP TO 24 CATHETERS PER HOOK

For optimal storage and organization the CC100 Cath cabinet
maintains an orderly, dust-free, accessible environment for cardiac
and interventional sterile catheters. It was engineered to hold the
maximum number of catheters using a minimum of floor space,
while maintaining easy access to the entire inventory. The cabinet
is all-steel construction for durability. Center storage area is 48”
across and each door gives 24” additional storage space.

Catheter Cabinet Top View
6.5”

48”

25.5”
7.25”

6”

12.25”

Fully Opened

Door Open
Along a Wall

31.5”

Doors Closed

Door Opened halfway to
fit into a Corner

48”
2.5” Area for Fastening to Studs

6”

64”

70”

WALL MOUNT CATHETER CABINET
EXTERIOR DIM.
(DOORS OPENED)

3.5”

WIDTH

HGT

DEPTH

99”

70”

7.25

APPROX. CATALOG
NO.
SHIP WT

350 lbs

CC100

6”
Adjustable Legs for Leveling

MOBILE CATHETER CART
Strong steel fabrication and a durable polyester finish make the CC105 ideal for
portable catheter storage. The CC105 stores up to 400-4” wide catheter packages on
moveable, positionable hangers to gain maximum storage capacity for the package
widths you choose. The lockable, roll-up top keeps catheters dust-free and secure, and
the smooth-rolling heavy duty casters make this cart easy to maneuver in tight quarters. Cushioned handles and bumper guards
provide added protection for both the catheter
cart and its environment.

MOBILE CATHETER CART
EXTERIOR DIM.
WIDTH

HGT

DEPTH

41”

51”

29.75

D-5

APPROX. CATALOG
NO.
SHIP WT

271 lbs

CC105

8 0 0 / 3 4 7 - X R AY

MODULAR CATHETER CABINETS
# 755 - 18.5” DEEP

S & S X-RAY PRODUCTS

#756 - 23” DE EP

MOBILE MODULAR CATH CABINETS

# 755M - 18.5” DE EP

w w w . s s x ra y. c o m

This protective hospital-grade cabinet has been optimized for the functional storage of
catheters in cardiac cath labs, invasive radiology suites, and the operating room environment. Durable heavy gauge welded steel construction, the use of high quality ballbearing drawer slides, and the efficiency of its modular design assure long-lasting,
trouble-free use. Counterbalanced locking roll-top doors provide for catheter security,
and create an ideal dust-free environment for storage.
The inside of the cabinet is customizable to meet the requirements of individual
departments. The cabinet has the option of mounting vertical dividers, drawers,
shelves, and hook-slides in multiple locations.
Catheters are stored on mobile hooks attached to an easy-gliding ball-bearing slide,
which allows non-obstructed access to all catheters in the cabinet. Pulling the slide forward brings catheters stored in the back of the cabinet to the front for easy identification and retrieval. The cabinet facilitates vertical hanging of catheters in sterile packages up to 72” long. There are five hooks per slide in model 755 and 755M (the 181/2”
deep cabinets), six hooks per slide in model 756 (the 23” deep cabinet), and each hook
can accommodate up to 15 catheters (more depending on thickness). With multiple
slides at different levels, cabinet capacity is maximized.
The large capacity drawers are steel-constructed, feature an integrated pull latch, and
are mounted on full extension high quality ball-bearing drawer slides for extra-smooth
motion when fully loaded. The 101/2” drawer depth is ideal for boxed catheters/wires,
or other items awkward to hang. A variety of drawer widths are manufactured to fit
the different cabinet configurations.
Shelves, available in different lengths, can be placed at intervals within the cabinet.
Hook-slides can be attached to the underside of the shelf.
Vertical dividers can be incorporated to customize this cabinet to store both long and
short catheters while efficiently maximizing useful storage space. These can be positioned to divide the cabinet into storage areas of 1/3 + 2/3, 1/2 +1/2 , or 1/3 + 1/3 + 1/3.
These dividers are permanently bolted into place at the factory.
The counterbalanced rolling doors come down from the top and up from the bottom
of the cabinet, to lock at a comfortable height. They retract into the cabinet for full
access to all contents. Counterbalancing springs assure easy, trouble-free door motion.
Model 755M mobile catheter cabinets are mounted on 3” heavy-duty casters and have
padded rubber handles on both sides for easy movement.
Identification tags allow you to label each slide and drawer for quick and easy catheter
retrieval.
Our customer service department will be happy to assist you in designing a cabinet to
fit your needs.
1/3 + 2/3

22.5”

755

85.5”
85.5”
83”*

756

16.625”

34.312”

EXTERIOR DIM.
DEPTH
HEIGHT WI DTH

CATALOG
NO.

1/2+ 1/2

755 M

38.125”
38.125”
39.5”*

18.5”
23”
24.75”*
1/3+1/3+1/3

*includes base with rubber bumper

10.875”

1/3+1/3+1/3

DRAWERS for 755 or 755M
1/3 D r a w e r
1/2 D r a w e r

2/3 D r a w e r
Full Drawer

SHELVES for 755 or 755M

INTERIOR DIM.
LENGTH WIDTH DEPTH

15.75”
15.75”
15.75”
15.75”

9.625”
15.5”
21.5”
33.125”

10.5”
10.5”
10.5”
10.5”

CATALOG
NO.

755001
755002
755003
755004

DRAWERS for 756
INTERIOR DIM.
LENGTH WIDTH DEPTH

1/3 D r a w e r
1/2 D r a w e r

2/3 D r a w e r

Full Drawer

21.5”
21.5”
21.5”
21.5”

9.625”
15.5”
21.5”
33.125”

10.5”
10.5”
10.5”
10.5”

1/3 S h e lf
1/2 S h e lf
2/3 S h e lf

Full S h e lf

CATALOG
NO.

10.875”

83”
73.75”

85.5”

755005
755006
755007
755008

SHELVES for 756
CATALOG
NO.

756001
756002
756003
756004

1/3 S h e lf
1/2 S h e lf

2/3 S h e lf

Full S h e lf

CATALOG
NO.

756005
756006
756007
756008

65.5”

38.125”

HOOK SLIDES
5 Hook for 755 & 755M ( 18.5” Deep)
6 Hook for 756
(23” Deep)
D-6

CATALOG
NO.

755009
756009

Model 755M Base w/rubber bumper: Width - 39.5 Depth - 24.75

VERTICAL DIVIDERS
for 755 & 755M
for 756

(18.5” Deep)
(23” Deep)

CATALOG
NO.

755010
756010

OPEN STEEL SHELVING

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

CHOICE OF TWE LVE SIZES
RIGID ALL STEEL CONSTRUCTION
CONVENIENT FOR ACTIVE AND I NACTIVE FILES
LOW COST

File x-ray envelopes the most convenient way - vertically - in units 18”
deep, designed specifically to store 14”x17” film. Choose from 3, 4, 5
or 6 shelf high units. Each shelf has a back stop to retain the envelopes,
vertical dividers to subdivide filing compartments and two end fillers
located at the inner edges of the corner posts to eliminate a filing trap
common to ordinary shelving.
Shelves are constructed of 19 gauge steel formed and reinforced for
extra strength. Corner posts are 12x1.25” gauge tough rail steel. The
bottom shelf is 6” above the floor but can be shortened upon request
at time of order. Units may be placed side by side or back to back,
however each unit is a complete assembly in itself. No extra parts are
required. All necessary hardware and braces are included. Units are
shipped knocked down and are easy to assemble.
24” units have four dividers to create three compartments per shelf.
36” units have six dividers to create five compartments per shelf.
48” units have eight dividers to create seven compartments per shelf.
Finish: Battleship gray baked enamel (on cold rolled steel).
✶ Optional Items:
865Q - Additional partitions - approx. ship wt. 3 lbs
865-11 - Closed bottoms - approx. ship wt. 22 lbs
861 - Index guides (see page E - 6) - approx. ship wt. 5 lbs
OPEN STEEL SHELVING
DEPTH : 18”
WIDTH

24” 3 Compartments
36” 5 Compartments
48” 7 Compartments

CAT NO

3 SHELF
55” HIGH

APPROX
SHIP WT

865J 90 lbs
865K 115 lbs
865L 130 lbs

4 SHELF
71” HIGH

CAT NO

CAT NO
APPROX
SHI P WT

865G 110 lbs
865H 140 lbs
865I 160 lbs

5 SHELF
87” HIGH

APPROX
S HIP WT

6 SHELF
103” HIGH

APPROX
SH IP WT

865A
865
865C

130 lbs
175 lbs
205 lbs

865D
865E
865F

150 lbs
214 lbs
250 lbs

865C 48” Seven Compartment Five Shelf Unit

Backs and sides are available to provide full enclosure of the open
steel shelving. (Please note: There is an additional packing charge for
the backs and sides.

BACKS AND S IDES

BACKS
WIDTH

CAT N O

CAT NO

3 SHELF
55” HIGH

24” 3 Compartments 865-23
36” 5 Compartments 865-24
48” 7 Compartments 865-25
SIDES
865-42

CAT NO

APP ROX
SHIP WT

4 SHELF
71” HIGH

APPROX
SHIP WT

5 SHELF
87” HIGH

APPROX
SHIP WT

6 SHELF
103” HIGH

APPROX
SHIP WT

12 lbs
20 lbs
25 lbs
15 lbs

865-29
865-30
865-31
865-43

20 lbs
25 lbs
30 lbs
15 lbs

865-20
865-21
865-22
865-40

20 lbs
30 lbs
40 lbs
20 lbs

865-26
865-27
865-28
865-41

25 lbs
35 lbs
30 lbs
20 lbs

865C Unit with 8 65-22 Back and 865-40 Sides

E-1

VERTIFILES

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

ALL STEEL WELDED REINFORCED CONSTRUCTION
ADJUSTABLE PARTITIONS
STACKABLE
SLIDING DOOR CLOSURE
AVAILABLE WITH LOCKS

Vertifile cabinets are constructed of heavy gauge cold rolled steel. Each shelf
section is reinforced. The inner and outer walls of the sides are welded
together for additional strength. The specially designed inner wall eliminates
the possibility of a film corner trap. Doors slide smoothly in steel tracks.
Three heavy duty partitions are provided for each shelf. Partitions can be
installed in any of eleven positions on each shelf without the need for tools.
Choose from 1, 2, 3 or 5 shelf models designed for storing 14”x17” film.
Locking doors are also available.
Inside dimensions of each shelf: 183/8” deep and 153/8” high.
Finish: Light gray baked enamel (on cold rolled steel).
✶ Optional Items:
856 - Additional partitions - approx. ship wt. 4 lbs
857 - 5” floor base - approx. ship wt. 15 lbs
861 - Index guides (see page E - 6) - approx. ship wt. 5 lbs

855 Five shelf Vertifile with doors

853 Three shelf Vertifile with doors

852 Two shelf Vertifile with doors

VERTIFILES
DEPTH : 19.75”

CAT NO
WITH

NO. OF S HELVES DOORS

1
2
3
5

851
852
853
855

CAT NO

APPROX WITHOUT APPROX W/LOCKS APPROX
DOORS S HIP WT & DOORS SHI P WT

S HIP WT

60 lbs
110 lbs
163 lbs
285 lbs

851D
852D
853D
855D

54 lbs
98 lbs
147 lbs
240 lbs

851L
852L
853L
855L

60 lbs
110 lbs
163 lbs
285 lbs

EXTERIOR DIM
WIDTH HEIGHT

29”
29”
29”
29”
E-2

17.25”
33.5”
49.75”
82.25”

851 One shelf Vertifile with doors

ECONOMY OPEN SHELF VERTIFILE

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

LOWER COST, CONVENIENT
DOUBLE WALL FLUSH DESIGN
STACKABLE
ALL STEEL CONSTRUCTION

This open shelf Vertifile can be stacked one
upon the other as well as side by side and
back to back. Each section is shipped complete and set up. No assembly is required.
Four screws through matching holes in tops
and bottoms of all cabinets secure the units
together after stacking. Partitions are fixed
and not adjustable.
Inside dimensions of each shelf: 191/2”
deep and 161/16” high. Approximate distance between partitions: 7 1/4”
Finish:Light gray baked enamel (on cold rolled
steel).

ECONOMY OPEN S HELF VERTIFILE

✶ Optional Items:
857 - 5” floor base - approx. ship wt. 15 lbs

EXTERIOR DIM
WI DTH

DEPTH

29”

19.75”

APPROX CATALOG
NO
HEIG HT SHIP WT

17.25”

48 lbs

861 - Index guides (see page E - 6) - approx. ship
wt. 5 lbs

841

FIXED PARTITION VERTIFILES
Models 851S and 851SD Vertifile cabinets are constructed of heavy gauge cold rolled steel. The inner
and outer walls of the sides are welded together for
additional strength. The specially designed inner wall
eliminates the possibility of a film corner trap. Doors
slide smoothly in steel tracks. The partitions are fixed
and are not adjustable. Single units can be stacked one
upon the other.
Inside dimensions of each shelf: 187/8” deep and 161/8”
high. Approximate distance between partitions: 63/4”

Finish:Light gray baked enamel (on cold rolled steel).
✶ Optional Items:
857 - 5” floor base - approx. ship wt. 15 lbs
861 - Index guides (see page E - 6) - approx. ship wt. 5 lbs

FIXED PARTITION VERTIFILES
EXTERIOR D IM

With Doors
Without Doors

WI DTH

DEPTH

29”
29”

19.75”
19.75”

E-3

APPROX CATALOG
NO
HEIGHT SHIP WT

17.25”
17.25”

54 lbs
44 lbs

851S
851SD

LETTER SIZE VERTIFILE

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

IDEAL FOR 18 X 24 CM MAM MOGRAPHY F ILM STORAGE
CHOICE OF TH REE SIZES
ADJUSTABLE PARTITIONS
SLIDING DOOR CLOSURE
ALL STEEL WELDED REINFORCED CONSTRUCTION

The letter size Vertifile will double the capacity of any filing area over that
obtained using conventional drawer files. Filing is simpler, faster and more
economical. Safer to use, these files can be loaded to suit the filing system,
files will never tip over. Anyone who has had the experience of using
Vertifiles for X-Rays will appreciate its great advantages for small format
18x24cm mammography film, letters, records files and 8 x 10 film. Two
doors and three adjustable partitions are furnished for each shelf.
Inside dimensions of each shelf: 281/4” wide, 123/4” deep and 9 3/4” high.

Finish:Light gray baked enamel (on cold rolled steel).
✶ Optional Items:
859 - Additional partitions - approx. ship wt. 3 lbs
860 - 5” floor base - approx. ship wt. 15 lbs
LETTER SIZE VERTIFILES
EXTERIOR D IM

3 Shelf
5 Shelf
8 Shelf

WIDTH

DEPTH

APPROX
HEIGHT SHIP WT

30”
30”
30”

14”
14”
14”

33.25” 101 lbs
54.75” 160 lbs
87” 250 lbs

CATALOG NO
DOORS NO DOORS

858B
858A
858

858BD
858AD
858D

EXTRA WIDE ONE SHELF VERTIFILE
WIDER - MORE FILM STORAGE
ALL STEEL WELDED CONSTRUCTION
STACKABLE
ADJUSTABLE PARTITIONS
SLIDING DOOR CLOSURE

This special wider Vertifile comes complete with three partitions and
two doors. Two pairs of interlocking clips in the rear of the cabinet
allows stacking of units.
Inside dimensions of each shelf: 183/16” deep and 151/2” high.
Finish:Light gray baked enamel (on cold rolled steel).
✶ Optional Items:
862 - Additional partitions - approx. ship wt. 4 lbs
857A - 5” floor base - approx. ship wt. 15 lbs
861 - Index guides (see page E - 6) - approx. ship wt. 5 lbs
FIXED PARTITION VERTIFILES
EXTERIOR DIM
WIDTH

With Doors
Without Doors

DEPTH

APPROX CATALOG
NO
HEIGHT SHIP WT

31.375” 19.375” 17.875”
31.375” 19.375” 17.875”

65 lbs
59 lbs

850
850D
E-4

SMALL SIZE VERTIFILE

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

A SMALL SIZE VERTIFILE
CUSTOM DESIGNED
TO ACCOMMODATE MAM MOGRAPHS
IDEAL FOR 24 X 30 CM or 18 X 24 CM FILM STORAGE
CHOICE OF TH REE SIZES
ADJUSTABLE PARTITIONS
SLIDING DOOR CLOSURE
AVAILABLE WITH LOCKS
ALL STEEL WELDED REINFORCED CONSTRUCTION

Especially designed to accommodate mammographs, this
vertifile will double the capacity of any filing area over that
obtained using conventional drawer files. Filing is simpler,
faster, more economical and safer. Stability and resistance
to tipping is designed into this cabinet. Two doors and three
adjustable partitions are furnished for each shelf. Inside
dimensions of each shelf: 28.25 wide, 12.875 deep and
11.25 high.

Finish: Light gray baked enamel (on cold rolled steel).
✶ Optional Items:
859A - Additional partitions - approx. ship wt. 3 lbs
860 - 5” floor base - approx. ship wt. 15 lbs

SMALL SIZE VERTIFILES
DEPTH : 14”

CAT NO
WITH

NO. OF S HELVES DOORS

1
3
6

871
873
876

CAT NO

APPROX WITHOUT APPROX W/LOCKS APPROX
DOORS SHIP WT & DOORS SH IP WT

SHIP WT

35 lbs
95 lbs
190 lbs

871D
873D
876D

E-5

30 lbs
90 lbs
175 lbs

871L
873L
876L

32 lbs
95 lbs
190 lbs

EXTERIOR DIM
WI DTH HEIGHT

30”
30”
30”

13.25”
37.75”
74.5”

INDEX GUIDES

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

Designed specifically to fit all our Open Steel Shelving and Vertifiles (except
Letter Size and Small Vertifiles), these index guides are the final touch to filing ease.
INDEX GUIDES

Sold in sets of 25 only.

APPROX
SHIP WT

Set of 25

CATALOG
NO

5 lbs

861

X-RAY FILING ENVELOPES
BLANK OR IMPRINTED
OPENING ON SHORT DIMENSION
EXPANSION TYPE AVAILABLE
CUSTOM IMPRINTING AVAILABLE
X-RAY FILING ENVELOPES
FILM S IZE

4.5”x10”
4.5”x17”
5”x7”
7”x17”
7”x17”
8”x10”
10”x12”
11”x14”
14”x17”
14”x17”
14”x17”
14”x17”
14”x17”
14”x17”
14”x17”x1”

DESCRIPTION

Blank
Blank
Standard Imprint
Standard Imprint
Blank
Standard Imprint
Standard Imprint
Standard Imprint
Standard Imprint
Standard Imprint
Blank
Standard Imprint
Standard Imprint
Standard Imprint
Expansion Envelope

QTY.
APPROX CATALOG
ENV.
KRAFT WT PER CTN SHIP WT
NO

28 Lb Gold
32 Lb Gold
28 Lb Gold
32 Lb Gold
32 Lb Gold
28 Lb Gold
28 Lb Gold
28 Lb Gold
28 Lb Gold
32 Lb Gold
32 Lb Gold
32 Lb Red
32 Lb Green
32 Lb Grey
40 Lb Gold

1000
1000
2000
1000
1000
1000
1000
500
500
500
500
500
500
500
100

20 lbs
33 lbs
27 lbs
53 lbs
53 lbs
31 lbs
44 lbs
27 lbs
43 lbs
50 lbs
50 lbs
50 lbs
50 lbs
50 lbs
15 lbs

B33
B14
S2
S3
B17
S4
S5
S18
S13
S6
B21
S15
S16
S17
S14

Envelopes are quality gold kraft, unless otherwise
noted. Catalog numbers with “S” have standard
imprint. Catalog numbers with”B” are blank unprinted. Custom imprinting is available with a
minimum order of 25,000 of the same envelope
(not an assortment of envelopes).
All envelopes are supplied in carton lots only.

X-RAY MAILING ENVELOPES
Envelopes are quality 32 lb. gold kraft.
All envelopes are supplied in carton lots only.
X-RAY MAILING ENV ELOPES
FILM S IZE

10”x12”
14”x17”

DESCRIPTION

String / with Cardboard
String / with Cardboard

QTY.
APPROX CATALOG
ENV.
NO
KRAFT WT PER CTN SHIP WT

32 Lb Gold
32 Lb Gold

50
50

8 lbs
17 lbs

S7
S11

E-6

DELUXE PROTECTOPANELS ®

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

CUSTOM BUILT
ALL STEEL AND LEAD CONSTRUCTION
CUSTOM SIZE PANELS
INTERNALLY REINFORCED
CHOICE OF WI NDOW SIZES

Deluxe Protectopanels ® complement the finest X-Ray room
furnishings and equipment. Installation is simple, clean and
fast. Upon request components can be finished in primer
paint only for on the job color matching. Panels are non-stock,
custom built to suit each individual size requirement.
Panels are heavy gauge steel internally reinforced and sound
insulated. A lead liner of 1/16” (1.55mm) minimum thickness is
centered and rigidly supported between the steel bracing
forming a 2” thick wall. Deluxe panels are 84” high.
A lead glass window can be factory installed in any panel of
18” or wider. Unless otherwise requested the center height of
the window will be 60”. Optional lead glass windows have a
lead equivalency of 1.7mm.
Our engineers, aided by your drawing and specifications, will
provide you with a custom designed protection barrier to
accentuate the appearance and functionality of your radiology suite.
The standard panels listed below are pricing guides, for cost
estimation purposes. Prices will be based on the next size up
panel if an in-between size is needed.
Finish: Light gray baked enamel, or if requested, primer paint only,
for you to custom finish on the job.

TO ORDER:
Provide a rough floor plan sketch including overall size,
angles, location of windows and any other special requirement.
Panels are 2” thick - be sure to specify whether sizes were measured on the outside or the inside of the booth. We will assume
that outside measurements are used unless otherwise specified.
Custom-made Deluxe Protectopanels are non-returnable.
For estimating costs: add up components from the list below (use
next larger size standard panel(s) for estimate.)

Sample Construction Detail

DELUXE PROTECTOPANELS ®

OPT. W INDOW

Specify Size & Location

S PECIFY
S PECIFY

OPT. WALL C HANNEL

ANGLE

DESCRIPTION

OVERALL SIZE

PANEL S IZE

560K (Corner)

2” Overlap

OPT. WALL B RACE
Specify Length

Panels are 2” thick, 84” high and
lined with 1/16” lead

Panel size is measured to the center of the overlap or finished end (on
outside of booth).

PROVIDE

A FLOOR PLAN WITH YOUR ORDER

F-1

6”x84” Deluxe Standard Panel
12”x84” Deluxe Standard Panel
18”x84” Deluxe Standard Panel
24”x84” Deluxe Standard Panel
30”x84” Deluxe Standard Panel
36”x84” Deluxe Standard Panel
Corner (any angle) Built into Panel
10”x12” Lead Glass Window (installed)
13”x17” Lead Glass Window (installed)
12”x16” Lead Glass Window (installed)
24”x36” Lead Glass Window (installed)
16”x20” Lead Glass Window (installed)
12”x12” Lead Glass Window (installed)
Wall Channel (Unleaded)
Wall Channel (Leaded)
Wall Brace (Specify Length)

APPROX CATALOG
SHIP WT
NO

50 lbs
100 lbs
150 lbs
200 lbs
250 lbs
300 lbs

10 lbs
15 lbs
10 lbs

560P
560A
560B
560C
560D
560J
560K
560G
560R
560S
560T
560U
560V
560H
560M
560L

RIBBED PROTECTOPANELS ®

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

RIBBED CONSTRUCTION
DESIGN VERSATILITY
ECONOMICAL
ALL STEEL AND LEAD CONSTRUCTION
CHOICE OF WI NDOW SIZES

Extremely versatile design makes it possible to adapt these panels for use in
virtually every X-Ray installation. These exclusive S&S Ribbed
Protectopanels® offer maximum economy. The unique designs of the panels
and couplings are protected by U.S. Patents.
Joints and corners are quickly made with the patented overlapping double
leaded “H” connectors. Installation is easy; after the floor channels and
optional wall brace (559L) are set in place the panels and couplings are
inserted and the entire assembly is enclosed by the top channel. Only the
floor and top channels are custom made for the job.
Panels are available in five different widths all 84” tall, 7/8” thick. An
optional 8”x10” or 10”x12” lead glass window (1.7mm lead equivalency) is
available for panels 24” or wider. The window is centered in the panel with
its center 60” above the floor. A lead liner of 1/16” (1.55mm) minimum thickness is centered between the two steel walls of our unique ribbed design for
strength and rigidity.
Finish: Light gray baked enamel

TO ORDER:
Provide a rough floor plan sketch including overall layout, location of
optional window if desired, angles and sizes of panels and attach to order.We
will assume that outside measurements are used unless otherwise specified.

Sample of Possible Floor plans
O PT. WALL BRACE
Specify Length

O PT. W INDOW

559L

RIBBED PROTECTOPANELS ®

Specify Size & Location

DESCRIPTION

12”x84” Ribbed Protectopanel ®
18”x84” Ribbed Protectopanel ®
24”x84” Ribbed Protectopanel ®
30”x84” Ribbed Protectopanel ®
36”x84” Ribbed Protectopanel ®
8”x10” Window (installed) - in panel 24” or wider
10”x12” Window (installed) - in panel 30” or 36”
Corner Connector (specify 300, 450, 600 or 900)
Straight Connector
Wall Brace (Specify Length)
Floor to Ceiling Support
Wall Channel for Ribbed Protectopanel ®
2” Leaded Wall Channel
3 Way “T” Coupling

559J (Corner Connector)
559K

(Straight Connector)

O PT. WALL CHANNEL
559M

559J (Corner Connector)

S PECIFY
ANGLE

559K

559T

(Straight Connector)

(3 Way Coupling)

Panels are 7/8 ” thick, 84” high and
lined with 1/16” lead

PROVIDE

A FLOOR PLAN WITH YOUR ORDER

F-2

APPROX CATALOG
SH IP WT
NO

75 lbs
100 lbs
130 lbs
180 lbs
205 lbs

20 lbs
20 lbs
10 lbs
10 lbs
10 lbs
15 lbs
20 lbs

559E
559A
559B
559C
559D
559G
560G
559J
559K
559L
559LA
559M
559ML
559T

RIBBED READY MADE BOOTH

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

RIBBED CONSTRUCTION for strength and rigidity
BUILT IN WI NDOW
CHOICE OF LEFT OR RIGHT WI NG
ALL STEEL, LEAD LI NED
CHOICE OF S IZES

Specially designed to provide a complete control booth at an economical price,
this unit includes a main panel (available in three different widths all 84” tall,
and 7/8” thick) with a built in 8”x10” or 10”x12” lead glass window (1.7mm,
minimum, lead equivalency), a 7” lead wing set at a 450 angle, a top channel
with provision for mounting to a wall and a bottom channel.
The window is centered in the panel with its center 60” above the floor. A lead
liner of 1/16” (1.55mm) minimum thickness is centered between the two steel
walls of our unique ribbed design. When ordering please specify left or right wing.
Position of wing is determined from the inside of the booth.
Finish: Light gray baked enamel

READY MADE BOOTH
DESCRIPTION

24” Panel
30” Panel
36” Panel
36” Panel

8”x10”Window
8”x10”Window
8”x10”Window
10”x12”Window

APPROX CATALOG
SHIP WT
NO

185 lbs
235 lbs
360 lbs
365 lbs

557A
557B
557C
557C10

RIBBED MOBILE DOUBLE WING SCREEN
INCREASED PROTECTION WITH WRAP AROU ND DESIGN
HEAVY DUTY BALL BEAR ING CASTERS
ALL STEEL, LEAD LI NED RIBBED CONSTRUCTION
BUILT IN 8” x 10” LEAD GLASS WINDOW
CHOICE OF H EIGHTS

Wrap around protection is provided by two 7” wings mounted on each side
of a ribbed center panel and mounted on heavy duty ball bearing casters.
The 8”x10” built in lead glass window* (1.7mm, minimum, lead equivalency)
is centered in the panel with its center 60” above the floor. A lead liner of 1/16”
(1.55mm) minimum thickness is centered between the two steel walls of our
unique ribbed design for strength and rigidity.

* A built in 10”x12” lead glass window is available on special order. Consult
factory for details.
Finish: Light gray baked enamel

MOBILE DOUBLE WING SCREEN
PANEL

HEIGHT WI DTH

72”
72”
72”
84”
84”
84”
F-3

24”
30”
36”
24”
30”
36”

OVERALL APPROX CATALOG

WI DTH

SH IP WT

38”
44”
50”
38”
44”
50”

175 lbs
200 lbs
225 lbs
245 lbs
260 lbs
285 lbs

554WA
554WB
554WBC
554WTA
554WTB
554WTC

8 0 0 / 3 4 7 - X R AY

RIBBED PROTECTIVE SCREENS

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

M OB I LE, STAT I ONA RY

H I NG E D

RIBBED CONSTRUCTION for strength and rigidity
BUILT IN LEAD GLASS WINDOW
ALL STEEL, LEAD LI NED
CHOICE OF S IZES

All of the screens below are constructed of our
unique ribbed design for strength and rigidity. A lead
liner of 1/16” (1.55mm) minimum thickness is centered
between two steel walls for a total thickness of 7/8”.
Each screen has a built in 8”x10” or 10”x12” lead
glass window (1.7mm. minimum, lead equivalency).
The window is centered in the panel with its center
60” above the floor.

Mobile: Stability and ease of movement are assured by the 3/16” thick steel
legs, with ball bearing casters.

Deluxe Mobile: Same as above but with window trim and all outer edge
trim finished in polished stainless steel.
Stationary: For use in a fixed position. Screens are supplied with a bottom
channel for fastening to the floor and a top channel with a wall mounting
bracket set at 900 (unless otherwise specified).
Hinged: A unique pivot design allows the screen to swing aside when not in
use. A ball bearing pivot assembly is built into the top and bottom of the
screen. A 16” wall bracket retains the top pivot. The bottom pivot is fastened
directly to the floor.
Finish: Light gray baked enamel

RIBBED PROTECTIVE S CREENS
SCREEN SIZE WI NDOW SIZE

CATA LO G N U M B E R S
APPROX
SHIP WT MOBILE DELUXE STATIONARY HINGED

24”x72”
30”x72”
36”x72”
24”x84”
30”x84”
36”x84”

8”x10”
8”x10”
8”x10”
8”x10”
8”x10”
8”x10”

115 lbs
140 lbs
185 lbs
130 lbs
190 lbs
210 lbs

554N
554
554A
554G
554B
554J

555N
555
555A
555G
555B
555J

554NS
554S
554AS
554GS
554BS
554JS

554NH
554H
554AH
554GH
554BH
554JH

36”x72”
30”x84”
36”x84”

10”x12”
10”x12”
10”x12”

190 lbs
195 lbs
215 lbs

554A10
554B10
554J10

555A10
555B10
555J10

554AS10
554BS10
554JS10

554AH10
554BH10
554JH10

F-4

CLEAR-Pb® LEAD-PLASTIC MODULAR
RADIATION BARRIERS

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

UNPARALLELED, DISTORTION - FREE VISIBILITY
MODULAR BARRIER COMPONENTS - SIMPLE, QUICK, ON-SITE I NSTALLATION
CHOICE OF LEAD E QUIVALENCY (0.3 TO 2.0 mm)
ATTRACTIVE, SPACE-SAVING, DECORATOR LOOK
SHATTER RESISTANCE
WALLS ONLY 1.5” THICK
IDEAL FOR SMALL OR LARGE FACILITIES

The versatility of Clear-Pb allows you to create panoramic viewing areas
that comfort the patient and provide personnel with a clear, unobstructed
view of the patient and the equipment. Made from a unique, transparent
plastic that contains 30% lead by weight, it is rugged and shatter-resistant,
an innovative combination of attractive, modern shielding and effective
radiation protection.
Clear-Pb Lead-Plastic Modular Barriers are available in lead-equivalencies from 0.3 to 2.0mm and are fabricated from large, continuous panels
up to 6’ x 8’ (larger sizes are available on special order). They can be easily changed, rearranged, added to or taken away from.
Enhance the appearance of an X-Ray, CT or special procedures room
with these “decorator look” competitively-priced modules that are easy to
handle for fast, on-site assembly and installation.
Our Clear-Pb product specialist can assist you with ideas, recommendations, floor plans, room layouts and prices.

CLEAR-Pb® MOBILE SCREENS
SS56-604

SS56-603
SS56-616
SS56-617

SS56-602

SS56-618

SS56-619

Smooth rolling Mobile Barriers combine unrestricted, distortion-free visibility and easy mobility in an attractive, effective radiation protection shield. Barriers are available in a variety of sizes for shielding one, two or more people. Consult factory for pricing.
MOBILE BARRIER SPEC IFICATIONS
MODEL

Regular
Jumbo
Deluxe
Deluxe
Ultra
Ultra
Nuclear Medicine

OVERALL WINDOW LEAD OPAQUE LEAD APPROX CATALOG
EQUIV PANEL EQUIV SHIP WT
NO
PANEL
SIZE

72”Hx30”W
75”Hx30”W
74”Hx48”W
74”Hx48”W
74”Hx72”W
74”Hx72”W
58”Hx36”W

24”Hx30”W
60”Hx30”W
36”Hx48”W
36”Hx48”W
36”Hx 72”W
36”Hx 72”W
24”Hx36”W

0.5mm
0.5mm
0.5mm
1.0mm
0.5mm
1.0mm
.8mm

48”Hx30”W
12”Hx30”W
36”H x48”W
36”H x48”W
36”Hx72”W
36”Hx72”W
34”Hx36”W

.08mm
.08mm
1.5mm
0.8mm
1.5mm
1.5mm

142 lbs
113 lbs
230 lbs
312 lbs
334 lbs
409 lbs
170 lbs

HALF FILM BLOCKERS

SS56-603
SS56-604
SS56-616
SS56-617
SS56-618
SS56-619
SS56-602
HALF FILM BLOCKER

Blockers are made from .125” thick lead vinyl material which has a lead equivalent
of 1.0mm. Available in sizes to block one half of a cassette front so that two exposures can be made on a single sheet of film.

F-5

WIDTH

H GT

4”
5”
5.5”
7”
5”
6”
7”
8.5”

10”
12”
14”
17”
8”
10”
11”
14”

APPROX. CATALOG
SHIP WT
NO.

5 lbs
5 lbs
6 lbs
7 lbs
5 lbs
5 lbs
6 lbs
8 lbs

139L
140L
141L
142L
139C
140C
141C
142C

RADIATION PROTECTIVE EYEWEAR

8 0 0 / 3 4 7 - X R AY

EYE PROTECTION FROM S CATTER RADIATION

S & S X-RAY PRODUCTS

FOR USE BY:
CATHETERIZATION LAB
ELECTROPHYSIOLOGY
ENDOSCOPY RAD IOLOGY
UROLOGIC PROCEDURES
ORTHOPEDIC SURGERY
VETERINARIANS

w w w . s s x ra y. c o m

This radiation protective eyewear can effectively eliminate approximately 90% of scatter radiation danger to the eye. These high quality contemporary frames offer the best protection available while being lightweight and comfortable.
Choose a variety of styles designed to reduce the chance of radiation induced injury, while being comfortable enough to make wearing
them a pleasure. Select from the variety of side shield styles for maximum protection and safety.
The lenses meet or exceed the standards for optical clarity, visible light transmission, power and prism correction.
All lenses are made from Schott RS-520 (SF-6) leaded glass - the industry standard for radiation shielding glass.
For a full brochure of all glasses offered please contact factory.

APRON AND GLOVE RACKS

Protect lead lined gloves and x-ray protective aprons from damage by using these sturdy heavy duty metal apron
and glove racks.

The apron is stored on the gracefully curved front bar which is designed to eliminate the danger of cracking or
tearing the apron.
Gloves are stored on steel vertical supports with phenolic balls that holds them in an upright open position to facilitate ventilation and prevent cracking of the lead material.
Finish: light gray baked enamel.

547 - Large Apron and Glove Rack Holds 4 Gloves and 2 aprons approx. shipping Wt. - 20 lbs.
548 - Apron and Glove Rack
Holds 2 Gloves and 1 aprons approx. shipping Wt. - 7 lbs.

WIDTH HGT DEPTH CAT. NO

27” 2” 9”
27” 13.5” 10.75”

TUF-GUARD PROTECTIVE
APRONS AND SHIELDS
TESTED CERTIFIED PROTECTION
DURABLE

REGISTERED

CHOICE OF STYLES

S&S Tuf-Guard products consist of multilayers of lead vinyl enclosed in an outer covering of a special
formulated PVC plastic, reinforced with a high strength nylon cloth. Outer edges are bound with a strong
woven cotton webbing. Each roll of lead vinyl that is used in the manufacture of Tuf-Guard is tested and
certified for its protective value. Tuf-Guard products are tear resistant, stain resistant, water resistant and
flame resistant.
Each S&S Tuf-Guard product is designed and cut to provide ease of movement and even weight distribution. Every Tuf-Guard protective product is recorded by its own individual serial number.
Aprons are custom tailored with a choice of styles and sizes. Choice of lead protection is also available.
All aprons are supplied with a breast pocket to hold pens, glasses, etc. Built in to the front of the pocket
is a clear plastic name holder which allows insertion of the users name.
TUF-GUARD APRONS
LEAD APPROX CATALOG
VELCRO CLOSURE
NO
SI ZE DIMENSIONS EQUIV SHIP WT

Petite
Standard
Long
Petite
Standard
Long

20”x32”
24”x38”
24”x42”
20”x32”
24”x38”
24”x42”

.5mm
.5mm
.5mm
.25mm
.25mm
.25mm

9 lbs
10 lbs
11 lbs
7 lbs
8 lbs
9 lbs

330010
330020
330030
330050
330060
330070

TUF-GUARD PROTECTIVE SHIELDS
TYPE

TIE STRAP C LOSURE

Petite
Standard
Long
Petite
Standard
Long

20”x32”
24”x38”
24”x42”
20”x32”
24”x38”
24”x42”

.5mm
.5mm
.5mm
.25mm
.25mm
.25mm

9 lbs
10 lbs
11 lbs
7 lbs
8 lbs
9 lbs

Half Apron
Gonad
Diaper
Thyroid

330110
330120
330130
330210
330220
330230

DIM.

24”x30”
9”x9”x9”
14”x20”
23”Long

LEAD APPROX CATALOG
EQUIV SHIP WT
NO

.5mm
.5mm
.5mm
.5mm

8 lbs
5 lbs
5 lbs
4 lbs

330300
330310
330320
330330

ALL APRONS ARE N ON-RETURNABLE
F-6

548
547

FILM LOADING BINS

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS

ALL STEEL CONSTRUCTION / WELDED SEAMS AND CORNERS
DOUBLE STEEL LIGHT TRAP

w w w . s s x ra y. c o m

FULL WIDTH STAINLESS STEEL DOOR H INGE
SIZES AND TYP ES TO MEET MOST REQUIREMENTS

These loading bins eliminate the problem of fogging film due to improper storage. A deep double steel light trap around the door gives maximum protection and assures film safety. Bins have a stainless steel full
width hinge to insure trouble free action. All corners and seams are
welded for strength, guaranteeing no light leakage that can fog film.
The interior of the hinged bin is divided into five or six compartments,
each capable of holding up to 14”x17” films. Each bin comes with inserts
to accommodate smaller film sizes and can be arranged to suit any film
assortment.
With the optional built in light limit switch 127R installed in a film loading bin and wired to the room lighting, the lights will automatically be
turned off whenever the loading bin is opened.
The 125X Film Loading Bin was designed for areas where space is limited, measuring only 18.375” wide.
The 129 Film Loading Bin is lined with .0 31” lead.

Choose the Film Loading Bin most appropriate to your needs and design a darkroom by
selecting any combination of cabinets from either the 15” Compact Darkroom Bench
Cabinets (see page G-9) or the Heavy Duty 21.5” Deluxe Darkroom Bench Cabinets (see
page G-7). See chart below for the proper base to use with the 21.5” bench cabinet.
Bases add 3.5” to the height of a bin, tops add 1”, and top and base add 4.5” to the total
height of a bin.
Finish: All Bins and Bases: Standard finish - light gray baked enamel. Formica tops are white.
✶ Optional Items: Room Light Control 127R
FILM LOADING BINS

C ATA L O G N U M B E R S

APPROX. LOADING BIN W/15” BI N W/15” BIN W/TOP BIN W/ BASE TO
EXTERIOR DIM
MATCH TO 21.5”CAB
DEEP BASE DEEP TOP
& BASE
COMPART. WIDTH
BIN
HGT DEPTH SHIP WT
NO. OF

5
6
5

22.5” 33”
22.5” 33”
18.375” 33”

15”
15”
12.5”

90 lbs
90 lbs
75 lbs

125
125K
125X

125B
125KB
125XB

126
125KT
125XT

126B
125KTB
125XTB

125 & 68R
125K & 68R
125X & 68RX

15”

130 lbs

129

129B

129T

129BT

129 & 68R

.031” LEAD LINED

22.5”

33”

TABLE TOP FILM LOADING BINS
ALL STEEL CONSTRUCTION / WELDED SEAMS AND CORNERS
SMALL AND C OMPACT
IDEAL FOR MAM MOGRAPHY Model# 128 holds 24x30cm and smaller
Model# 128A holds 14”x17” and smaller
FULL WIDTH BLACK ENAMEL DOOR H INGE
BUILT TO LAST

These small, space saving counter top Film Loading Bins are ideal for any darkroom. The
level top can be used as an alternate work surface to minimize loss of counter space. The
128 is designed specifically to hold 24x30cm and 18x24cm (or smaller) films making it a
must for the mammography darkroom. The 128A holds 14”x17” (or smaller) film and will
complement any darkroom where space is limited. A deep double steel light trap around
the door gives maximum protection and assures film safety. All corners and seams are
welded for strength guaranteeing no light leakage that can fog film. The door has a full
width hinge to insure trouble free action for the life of the cabinet.
TABLE TOP FILM LOADING BINS
NO. OF
COMPART.

2
5

APPROX. CATALOG
EXTERIOR DIM
WIDTH HGT DEPTH SHIP WT
NO.

13” 10.75” 15” 25 lbs
17.5” 13.25” 20.75” 40 lbs

128
128A

The interior of the 128 is divided into two compartments by a welded shelf and is finished
in black baked enamel. Each compartment holds up to two full boxes of film. The interior
of the 128A has five compartments (each capable of holding one box of 14”x17” film).
An optional built in light limit switch is available for either the 128 or the 128A. With the
127A Light Limit Switch installed in the Film Loading Bin and wired to the room lighting,
the lights will automatically be turned off whenever the bin is opened.

Finish: Black baked enamel.
✶ Optional Items: Room Light Control 127A
G-1

FILM IDENTIFICATION PRINTERS
AND CARDS

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

AUTOMATIC or MANUAL MODELS
TABLE TOP or RECESSED MODELS
CLEAR, SHARP IDENTIFICATION

AUTOMATIC I.D. PRINTERS
The automatic timing circuit and capacitor discharge system built into the
Automatic I.D. Printer consistently provides sharp, clear patient data on every
X-Ray film. The printer is constructed of a heavy duty all steel body, a Stainless
Steel door with a foam rubber contact pad and a Stainless Steel face plate with
guide rails for perfect positioning. Stainless Steel parts are polished to a satin
finish, steel parts are finished in light gray baked enamel. Recessed model has
a baked enamel flange for recessing into a counter top.
AUTOMATIC I.D. P RINTERS
available on special order.

OPERATE ON

118 volts 60HZ

AC.

Other voltages

AUTOMATIC I.D. PRINTER
EXTERIOR DIM
DESCRIPTION WIDTH LE NGTH DEPTH

Table Top
Recessed

8”
10”

2.5”
2.5”

APPROX.
SHIP WT

CATALOG
NO.

5 lbs
6 lbs

144
144X

MANUAL I.D. PRINTERS
Exposure in these models is not automatically timed. The duration of the exposure is determined by the amount of time the printer door is held in the down
position. The printer is constructed of a heavy duty all steel body, a Stainless
Steel door with a foam rubber contact pad and a Stainless Steel face plate with
guide rails for perfect positioning. Stainless Steel parts are polished to a satin
finish, steel parts are finished in light gray baked enamel. Recessed model has
a baked enamel flange for recessing into a counter top.
MANUAL I.D. PRINTER
EXTERIOR DIM
DESCRIPTION WIDTH LE NGTH DEPTH

Table Top
Recessed

8”
10”

2.5”
2.5”

APPROX.
SHIP WT

CATALOG
NO.

5 lbs
6 lbs

143
143X

Custom personalized imprint
J. Smith M.D.
100 Park Ave.

New York, N.Y. 10010

Patient
No.
Exam.

Date

IDENTIFICATION CARDS
Available for use with the above printers are special 3” x 5” translucent cards which will assure clear, sharp transfer of information
onto the X-Ray film. Cards are available with a standard imprint
format or a custom personalized two line imprint.
Identification cards are available in multiples of 500 only. No
partial carton orders.
Custom personalized imprints are available with a minimum
order of 1000 (for over 1000 order must be in multiples of 500).
For personalized imprint a sample card or written order is required.

143C
Identification Card

143C - Identification Cards, 500 per CTN

G-2

CASSETTE TRANSFER CABINETS
(PASS BOXES)

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

DOUBLE WALL WELDED SEAM CONSTRUCTION

VOICE PASSAGE WITHOUT LIGHT LEAKAGE

BUILT FOR LONG SERVICE

AVAILABLE WITH OR WITHOUT LEAD LINING

18 & 20 GAUGE HEAVY DUTY STEEL

REPLACEABLE INTE RLOCK M ECHANISM

The Pass Box (Cassette Transfer Cabinet) allows cassettes to be
transferred to and from the darkroom without the worry of light or
radiation entering. Extra heavy duty construction with double light
and radiation traps, 2” x 3” hinges (welded to the doors) and welded metal reinforcing produce a superior cabinet designed to stand
up to the abuse of a busy department.
These cabinets (except for the manual models) feature automatic
interlocking doors. Opening one door automatically locks the opposite door. Exposed and unexposed compartments are independently controlled, permitting simultaneous use of both compartments
from the opposite side. The interlock mechanism not only locks the
door opposite the open door but also keeps the doors shut when
both are closed. Optional Automatic Signal Lights (see below) light
up to indicate the presence of cassettes within the cabinet.
Cabinets are available with or without lead lining. Lead liner (1/16”
or 1/8” thick) is completely wrapped around the cassette compartments into the wall flange. The door lead overlaps the cabinet lead
liner for complete radiation protection. The cabinet lead is cut with
a minimum of joints and each joint is overlapped.
The welded, reinforced, double sheet metal construction, durable
hinges and unique locking system produce a cabinet designed to
give long trouble free service.

Shown: 887A

Finish: Standard finish - light gray baked enamel.

✶ Optional Items: Catalog no. 889 - Automatic Signal Lights, mounted on the front and back of the cabinet automatically light up to indicate the presence of a cassette within the Transfer Cabinet. The weight of the cassette on a floating
bottom inside the compartment actuates a switch to turn signal lights on. An amber safelight filter is included for the darkroom side.
Rough-In Frames, Opposing Wall Flanges see page G-5
22.375”

EXPOSED

AUTOMATIC INTERLOCK
4 DOOR TRANSFER CABINETS

UNEXPOSED

24.187”

26.187”

.75”

Two independent compartments are created by an upright light-tight
wall between the doors. Opening the right side door automatically seals
the opposing door on the back of the cabinet. Opening the left does the
same for that side. The interior measurements of each compartment of
models 887A, 8 87AX and 887B are 8.375” wide, 20” high and 16.75”
deep. The interior measurements of each compartment of models
887H, 887HX and 887J are 14.937” wide, 20” high and 16.75” deep.

✶ Optional Items: See above

24.375”
35.5”

AUTO-INTERLOCK 4 DOOR TRANSFER CABINET
DESCRIPTION

EXPOSED

UNEXPOSED

24.187”

26.187”

CAB. EXT. DIM
FLANGE EXT. DIM
WI DTH HGT DEPTH WIDTH HGT DEPTH

.062” Lead Lined 22.375” 24.187” 18.125” 24.375” 26.187” .75”
.125” Lead Lined 22.375” 24.187” 18.125” 24.375” 26.187” .75”
Unlined
22.375” 24.187” 18.125” 24.375” 26.187” .75”

240 lbs
315 lbs
187 lbs

887A
887AX
887B

350 lbs
425 lbs
260 lbs

887H
887HX
887J

LARGE CABINET

.062” Lead Lined 35.5” 24.187” 18.125” 37.5” 26.187” .75”
.125” Lead Lined 35.5” 24.187” 18.125” 37.5” 26.187” .75”
Unlined
35.5” 24.187” 18.125” 37.5” 26.187” .75”
.75”

APPROX. CATALOG
SHIP WT
NO.

37.5”

G-3

AUTOMATIC INTERLOCK
TWO DOOR TRANSFER CABINETS

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m
18.25”

24.187”

26.187”

.75”

20.25”

The same unique heavy duty construction as described on
page G-3 is used in these two door, single compartment
models. The smaller of these models can be used when
space is limited or for one-way transfer. The larger can
accommodate cassettes stacked vertically with a center partition. Opening the door on one side of the cabinet automatically seals the opposing door on the back of the cabinet.
Right or left hand doors with hinges on the right and left
sides, respectively, are available. The interior measurements
of models 887P, 887PX and 887R are 14.625” wide, 20” high
and 16.75” deep. The interior measurements of models
887T, 887TX and 887W are 18.75” wide, 20” high and
16.75” deep.

AUTO-INTERLOCK 2 D OOR TRANSFER CABINET
CATALOG NO.
CAB. EXT. DIM
APPROX.
FLANGE EXT. DIM
DESCRIPTION WI DTH HGT DEPTH WIDTH HGT DEPTH SHIP WT RT. HAND LT. HAN D
SMALL CABINET

.062” Lead Lined 18.25” 24.187” 18.125” 20.25” 26.187” .75”
.125” Lead Lined 18.25” 24.187” 18.125” 20.25” 26.187” .75”
Unlined
18.25” 24.187” 18.125” 20.25” 26.187” .75”

200 lbs
275 lbs
150 lbs

887P
887PX
887R

887PL
887PXL
887RL

275 lbs
350 lbs
225 lbs

887T
887TX
887W

887TL
887TXL
887WL

Shown: 887P Right Hand Door
22.375”

LARGE CABINET

24.187”
26.187”

✶ Optional Items: Automatic Signal Lights, page G-3: Rough-In Frames: Opposing Wall
Flanges, page G-5

.75”

24.375”

AUTO-INTERLOCK - UNEQUAL COMPARTMENT 4 DOOR
TRANSFER CABINET Special design makes additional space available for unex25.75”

EXPOSED

UNEXPOSED

24.187”

26.187”

posed cassettes to meet peak load periods. Design and construction are the same as described on page G-3. The inte rior measurement of the smaller compartment is 8” wide:
the larger compartment is 12.5” wide and subdivided with
a center partition into two 6.25” wide units. Both compartments are 20” high and 16.75” deep.
✶ Optional Items: Automatic Signal Lights, page G-3: RoughIn Frames: Opposing Wall Flanges , page G-5

AUTO-INTERLOCK - U NEQUAL COMPARTMENT4 DOOR TRANSFER CABINET

.75”

27.75”
DESCRIPTION

CAB. EXT. DIM
FLANGE EXT. DIM
APPROX. CATALOG
WI DTH HGT DEPTH WIDTH HGT DEPTH SHIP WT
NO.

.062” Lead Lined 25.75” 24.187” 18.125” 27.75” 26.187” .75”
.125” Lead Lined 25.75” 24.187” 18.125” 27.75” 26.187” .75”
Unlined
25.75” 24.187” 18.125” 27.75” 26.187” .75”

350 lbs
425 lbs
300 lbs

887M
887MX
887N

MANUAL INTERLOCK 4 DOOR TRANSFER CABINET

21”

EXPOSED

UNEXPOSED

22”
23.5”

1”

A twist of the bronze T handle releases both doors and automatically locks the opposite side. Interlocking occurs before
doors are released to assure light tightness. A simplified trouble
free cam actuated interlock assures long service. With the
exception of the locking system, these units have the same
unique heavy duty construction described on page G-3 The
interior of each inner compartment measures 8” wide, 19.25”
high and 17.5” deep.

22.5”

MANUAL INT ERLOCK 4 DOOR TRANSFER CABINET
DESCRIPTION

.062” Lead Lined
.125” Lead Lined
Unlined

CAB. EXT. DIM
FLANGE EXT. DIM
WI DTH HGT DEPTH WIDTH HGT DEPTH

21”
21”
21”

22” 19.625” 22.5” 23.5”
22” 19.625” 22.5” 23.5”
22” 19.625” 22.5” 23.5”

1”
1”
1”

APPROX. CATALOG
SHIP WT
NO.

200 lbs
275 lbs
150 lbs

888A
888AX
888B
G-4

✶ Optional Items: Automatic Signal Lights, page G-3: RoughIn Frames: Opposing Wall Flanges,, page G-5

ROUGH-IN FRAMES
OPPOSING WALL FLANGES
INSTALLATION DETAILS

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

Rough-In Frames

.75” Flange all
around

When installing Transfer Cabinets it is advisable to use Rough-In Frames. RoughIn Frames can be installed during construction avoiding the problems of damage or
dirt during construction and permitting Transfer Cabinets to be removed or
exchanged any time in the future. Rough-In frames are 16 gauge cold rolled steel
and welded for strength and rigidity.

.75” Flange all
around

4.437”
5.5”

The outer frame of the telescoping set is 1/2” larger than the Transfer
Cabinet for which it is intended. Wall openings should be provided to accept this
outer frame.
Inner Frame

Approx. Ship. Wt. 16 lbs

Fasten Cassette Transfer
Cabinet flange to outer frame
flange

The optional Opposing Wall Flange is 18 gauge cold rolled steel and designed to
match the Transfer Cabinet size. Its use provides a more finished appearance at the
wall in the back of the cabinet.

Outer
Frame

Two telescoping frames outer frame is .5” larger
than Transfer Cabinet.

Opposing Wall Flange

Approx. Ship. Wt. 5 lbs

Finish: Standard finish - light gray baked enamel. Optional finish - S&S Blue.
Four Piece Construction

Cross Section - Stud Wall
ROUGH-IN FRAMES AND OPP OSING WALL FLANGES

Lead Lining

FOR USE WITH TRANS. CAB.
MODEL

Plaster

STUD

Drill holes in
cabinet frame
& rough-in
frame.
Screws are not
supplied.

Rough-In Frame

Opposing Wall
Flange

Cassette
Transfer Cabinet

Drill holes in frame as required.

8 87A, 887 A X, 887 B
8 87H, 887HX, 887 J
8 87 P, 887PX , 887 R
8 87PL , 887PXL, 887 R L
8 87 T, 887 TX, 887 W
8 87 T L, 887 T XL, 887 W L
8 87M, 887MX, 887 N
888A, 888AX, 888B

Cross Section - Masonry Wall

Lead
Plaster
Drill and tap
holes in cabinet frame &
rough-in
frame.
Screws are not
supplied.

Lead lined cinder bloc k

Opposing Wall Flange

Grout
Cassette
Transfer Cabinet

Rough-In Frame
Drill and tap holes in frame as
required.

G-5

CATALOG NO.
ROUGH-IN OPP. WALL
FRAME
FLANGE

887C
887K
887S
887S
887C
887C
887U
888C

887D
887DH
887DP
887DP
887D
887D
887DU
888D

SAFELIGHTS

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS

HIGH VISION SAFELIGHT

w w w . s s x ra y. c o m

PRODUCES MORE USABLE LIGHT IN THE SAFE RANGE
THAN CONVENTIONAL SAFELIGHTS

WIDTH

HGT

DEPTH

15 Watt 21.5”
20 Watt 25.5”

1.5”
1.5”

3.75”
3.75”

FLUORESCENT

BRIGHTER LIGHTING

ECONOMICAL

REUSABLE F ILTER

The unique combination of the reusable slip-on polycarbonate
filter sleeve and a fluorescent bulb produce more visible light in
the safe range than conventional safelights. High Vision
Safelights are safe for use with all blue or green sensitive X-Ray
film. Safelights must be mounted a minimum distance of 4 feet
from film.
You save filter replacement costs when changing the fluorescent
bulb because, unlike some safelights, the High Vision Safelight
filter is reusable and does not need to be replaced with the bulb.

215040 - High Vision 15 Watt (18” long bulb)
approx. shipping Wt. - 5 lbs.
215050 - High Vision 20 Watt (24” long bulb)
approx. shipping Wt. - 7 lbs.

The safelight has a pull string on-off switch and comes with a six
foot 3-conductor grounded cord set. Safelights operate on 118
volts 60 HZ AC .5 AMPS.
Finish: Baked on White Enamel.

SUPERLIGHT

WIDTH

HGT

DEPTH

10.25”

11”

3.25”

This ultrathin, tapered 8”x10”
safelight is scientifically
designed to direct light where
it is most needed. It is constructed of extra heavy gauge
steel and electrically welded
in the corners. Only safelights
made this more costly way
can assure permanent light
tightness. Tapered design
adds both beauty and utility
to this superior safelight.
Comes with a six foot 3-conductor grounded cord set.
Finish: light gray baked enamel.

approx. shipping Wt. - 7 lbs.

Only 3.75” deep, this two com partment all welded safelight
features an 8”x10” safelight and
a 4”x10” illuminator. The all
steel welded housing permanently prevents any light leakage. Exceptionally shallow
depth will allow convenient
placement without obstruction.
The safelight switch is mounted
in the front and the illuminator
switch is mounted on the side
to avoid any chance of accidental lighting. Comes with a six
foot 3-conductor grounded
cord set.
Finish: light gray baked enamel.

approx. shipping Wt. - 11 lbs.

302 Superlight, Baked Enamel Finish, S&S 6B Filter
302K - Superlight, Baked Enamel Finish, GBX-2 Filter

COMBINATION

WIDTH

HGT

DEPTH

10.25” 14.25” 3.75”

301 - Combination, S&S 6B Filter
300 - Combination, GBX-2 Filter

CHOICE OF F ILTERS: S&S 6B for Blue sensitive film or KODAK GBX-2 for Blue or Green sensitive film

ECONOMICAL

CIRCULAR 3.5” SAFELIGHT

A sturdy economical steel
safelight with an 8”x10” filter.
It can be mounted on a wall
or the tank backboard, or it
can stand on a shelf. Comes
with a six foot 3-conductor
grounded cord set.

A compact, low cost 3.5”
round safelight that
screws into any standard
light fixture.
Finish: Brushed Aluminum.

approx. shipping Wt. 2 lbs.

Finish: light gray baked enamel.

approx. shipping Wt. - 9 lbs.

300A - Economical, S&S 6B Filter

WIDTH

HGT

300B Circular, S&S 6B Filter

DEPTH

10.25” 10.25” 3.5”
SAFELIGHTS

OPERATE ON

G-6

118 VOLTS 60H Z AC .

HEAVY DUTY 21.5” DELUXE
DARKROOM BENCH CABINETS

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w. s s x ra y. c o m

DOUBLE WALL CONSTRUCTION / WELD ED SEAMS AND CORNERS / 18 GAUGE HEAVY DUTY STEEL
MODULAR DESIGN FOR CUSTOM I NSTALLATION
BUILT IN BAS ES
CUSTOM FORMICA TOPS AVAILABLE

Shown: 68C, 68M, 68Z, 68S, and 68P

Deluxe darkroom cabinets are made of formed and welded cold rolled steel. Cabinet tops are open and perforated for easy installation of optional formica covered cabinet tops. All inner side walls of these double walled cabinets have holes to facilitate side by side
mounting. Each cabinet can stand independently or in combination with with any other cabinet in this series. All deluxe cabinets have
built in bases. Choose from any combination cabinets below and add in any Film Loading Bin to make a complete darkroom work station. See page G-1 to select the appropriate bin and base.
Optional 68H Formica Counter Tops; 68T Counter Top End Support; 68TA Wall Scribe Strips; 68TB Filler and 68TC Corner Filler
Finish: All Bins and Bases: Standard finish - light gray baked enamel. Formica tops are white.
Right Hand Model

Left Hand Model

Side
to
Wall

Abut to
Next
Cabinet

CORNER CABINET
EXTERIOR DIM

39.5”

37”

Abut to
Next
Cabinet

37”

CAB.W/DOOR CORNER CAB

Side
to
Wall

WIDTH HGT

DEPTH

39.5” 37”

21.5”

23.5

APPROX. CATALOG
SHIP WT
NO.

95 lbs

68C

Corner Cabinets are designed to fill in the corner of an “L” shaped room layout. Double
doors open and permit storage on two full depth adjustable shelves. A sketch is required
with order showing location of cabinet to determine left or right model.

18”

CASSETTE CABINET
EXTERIOR DIM
WIDTH HGT

18”
37”

37”

DEPTH

21.5”

APPROX. CATALOG
SHIP WT
NO.

75 lbs

68M

Cassette Cabinets store cassettes on edge in the upper three compartments. The lower
compartment is for general utility.

WORK BENCH UTILITY CAB INET

30”

EXTERIOR DIM
WIDTH HGT

30”
37”

37”

DEPTH

21.5”

APPROX. CATALOG
SHIP WT
NO.

165 lbs

68Z

Work Bench Utility Cabinets: A complete workbench and utility cabinet with full size
pullout shelf, drawer with ball bearing suspension and double doors that open to permit
storage on two full depth adjustable shelves. All steel construction.
G-7

HEAVY DUTY 21.5” DELUXE

8 0 0 / 3 4 7 - X R AY

DARKROOM BENCH CABINETS

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

18”

UTILITY CAB INET
EXTERIOR DIM
WIDTH HGT DEPTH

18”

37”

APPROX. CATALOG
SHIP WT
NO.

21.5”

77 lbs

68N

Utility Cabinets: Double doors open and permit storage on two full depth adjustable
shelves. All steel construction.

37”

WASTE BIN / IDENTIFIER CABINET
APPROX. CATALOG
SHIP WT
NO.

EXTERIOR DIM
WIDTH HGT DEPTH

12”

12”
12”

37”
37”

21.5”
21.5”

75 lbs
75 lbs

68P
68PX

Waste Bin / Identifier Cabinet:
68P: Deposit waste through a cutout in the counter top. All steel construction. Inner
steel waste bin has a lift handle for easy removable.

37”

68PX: Designed to have a film identification printer recessed into the counter top and
cabinet of this unit. All steel construction.
68SW

68S
18”

SINK CABINET
EXTERIOR DIM
WIDTH HGT DEPTH

30”

18”
30”

12”
37”

37”

37”
37”

APPROX. CATALOG
SHIP WT
NO.

21.5”
21.5”

77 lbs
95 lbs

68S
68SW

Sink Cabinets come with a stainless steel sink complete with drain, tail piece, faucets
and spigot. Double doors open and permit storage on two full depth adjustable
shelves. All steel construction.
CABINET END SUPPORT
EXTERIOR DIM
WIDTH HGT

3”

37”

DEPTH

APPROX. CATALOG
SHIP WT
NO.

21.5”

30 lbs

68T

37”

Cabinet End Support: This all steel leg is available to support the formica top
beyond the end of a cabinet when a longer counter top is desired.

FORMICA COUNTER TOP
EXTERIOR DIM
4.5”

LENGTH HGT

DEPTH

To Order 4.5”

21.5”

APPROX. CATALOG
SHIP WT
NO.

Custom

68H

Formica Counter Tops are custom made for all types of darkrooms and loading
benches. Usual construction includes white formica on .75” chipboard with a 4.5” high
backsplash and end returns. 22.5” depth allows for a 1” overhang at the front of the
cabinet. Custom cut outs are made for waste bins, ID printers, etc. When ordering,
please provide a drawing or sketch.

F I N I S H I N G F I L L E R PI E C E S
CATALOG
NO.

Wall Scribe Strip
Cabinet Filler
Corner Filler

68TA
68TB
68TC

Custom made fillers, scribe strips or corners are available to complete each installation. Made to match cabinet profile, they are designed to close any spaces between
cabinets or a cabinet and a wall for a finished smooth look. The Corner Filler can be
used in a corner as an alternative to a corner cabinet.
Contact factory for engineering assistance.

G-8

15” COMPACT DARKROOM BENCH
CABINETS

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS

MIX AND MATCH COMBINATION
ONLY 15” DEEP

w w w. s s x ra y. c o m

COMPACT DESIGN - LOW COST
20 GAUGE ALL STEEL CONSTRUCTION

Designed expressly for the X-Ray department, these steel cabinets form the perfect work station for any large or small darkroom, film
loading station, etc. While occupying a minimum of floor space, they will hold all of the film, cassettes and utility items used by the XRay department. The compact design and low cost make them the ideal choice for most X-Ray installations.
Choose from any combination of the six cabinets below and add in any Film Loading Bin (page G-1) and Drier (page G-14) to make a
complete darkroom work station.
Optional formica tops and all steel bases are available for each unit. For a finished, built-in look, a custom formica One Piece Top (with
back splash [118G] or without back splash [118F]) and/or One Piece steel Custom Base [118B] are available for any combination of units.
Finish: All Bins and Bases: Standard finish - light gray baked enamel. Formica tops are white.

THREE COMPARTMENT CASSETTE STORAGE CAB INET
APPROX. CATALOG
EXTERIOR DIM
DESCRIPTION WIDTH HGT DEPTH SHIP WT
NO.

Cassette Cabinet
W/Base
W/Top
W/Base & Top

11”
11”
11”
11”

33”
36.5”
34”
37.5”

15”
15”
15”
15”

35 lbs
50 lbs
45 lbs
60 lbs

160
160B
160T
160BT

FOUR COMPARTMENT CASSETTE STORAGE CAB INET

APPROX. CATALOG
EXTERIOR D IM
DESCRIPTION WIDTH HGT DEPTH SHIP WT
NO.

Cassette Cabinet
W/Base
W/Top
W/Base & Top

16”
16”
16”
16”

33”
36.5”
34”
37.5”

15”
15”
15”
15”

50 lbs
65 lbs
60 lbs
75 lbs

161
161B
161T
161BT

OPEN FRONT UTILITY CABINET

EXTERIOR DIM
APPROX. CATALOG
DESCRIPTION WIDTH HGT DEPTH SHIP WT
NO.

Cabinet
W/Base
W/Top
W/Base & Top

29”
29”
29”
29”

33”
36.5”
34”
37.5”

15”
15”
15”
15”

50 lbs
65 lbs
60 lbs
75 lbs

890
890B
890T
890BT

DOUBLE DOOR , TWO S HELF CABINET

APPROX. CATALOG
EXTERIOR D IM
DESCRIPTION WIDTH HGT DEPTH SHIP WT
NO.

Cabinet
W/Base
W/Top
W/Base & Top

29”
29”
29”
29”

33”
36.5”
34”
37.5”

15”
15”
15”
15”

60 lbs
75 lbs
70 lbs
85 lbs

891
891B
891T
891BT

TWO SHELF UTILITY CABINET

APPROX. CATALOG
EXTERIOR D IM
DESCRIPTION WIDTH HGT DEPTH SHIP WT
NO.

Cabinet
W/Base
W/Top
W/Base & Top

16”
16”
16”
16”

33”
36.5”
34”
37.5”

15”
15”
15”
15”

50 lbs
65 lbs
60 lbs
75 lbs

893
893B
893T
893BT

WASTE BIN CABINET
APPROX. CATALOG
EXTERIOR DIM
DESCRIPTION WIDTH HGT DEPTH SHIP WT
NO.

Cabinet
W/Base
W/Top
W/Base & Top

16”
16”
16”
16”

33”
36.5”
34”
37.5”

15”
15”
15”
15”

65 lbs
80 lbs
75 lbs
90 lbs

894
894B
894T
894BT

✶ Optional Items: Custom one piece Steel Base - 118B; Custom one piece Flat Formica Top - 118F; Custom one piece Formica Top with Back
Splash - 118G; Counter Top End Support - 115; Factory Assembled and Crated for One Piece Installation - 118P; Film Dryer see page G-14
G-9

DELUXE WALL CABINETS

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

DOUBLE WALL WELDED SEAM C ONSTRUCTION
ATTRACTIVE WALL MOUNTED UNITS
18 GAUGE HEAVY DUTY STEEL
MODULAR DESIGN FOR CUSTOM INSTALLATION
SAVES F LOOR SPACE

Ideal for large or small darkrooms, Deluxe Wall
Cabinets provide additional storage space without
using valuable floor space. They are the perfect mate
to either the 15” Compact Darkroom Bench
Cabinets or Heavy Duty 21.5” Deluxe Darkroom
Bench Cabinets. All inner side walls of these double
walled cabinets have holes to facilitate side by side
mounting. Choose from any combination of wall
cabinets below and add in any Cassette Transfer
Cabinet (page G-3, 4) to make a complete darkroom
work station.
Finish: Standard finish - light gray baked enamel. Formica tops
are white.

Two sizes of Wall Cassette Cabinets are available, 18” wide with three compartments and 24” wide with four compartments. Both cabinets are all steel
double wall construction with keyholes provided in the rear for easy hanging
and holes in the inner side walls to facilitate bolting units side by side.
WALL CASSETTE CABINET
DESCRIPTION

EXTERIOR DIM
APPROX. CATALOG
WI DTH H EIGHT DEPTH SHIP WT
NO.

3 Compartment
4 Compartment

Wall Utility Cabinets are all steel double wall construction with keyholes provided in the rear for easy hanging and holes in the inner side walls to facilitate bolting
units side by side. Double doors, door catch and two adjustable shelves come with
this cabinet.
WALL UTILITY CAB INET

EXTERIOR DIM
APPROX. CATALOG
NO.
WIDTH H EIGHT DEPTH SHIP WT

18”

22”

16”

44 lbs

157

G - 10

18”
24”

22”
22”

16”
16”

40 lbs
51 lbs

159
158

DARKROOM ACCESSORIES

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w. s s x ra y. c o m

5 GALLON DEVELOPING TANK
POLISHED STAINLESS STEEL

PASSIVATED

HELIARC WELD ED

LONG LIFE

Constructed of type 316 stainless steel, Heliarc welded, passivated (chemically treated to resist
corrosion) and polished to a satin finish, this tank is designed and built to provide trouble free service. Two removable 5 gallon insert tanks and a tank drain with plastic stand pipe are supplied
with each tank.

98A - Stainless Steel Tank with two 5 gallon insert tanks ( base not included)
19”x17”x22.5” deep
Approx. shipping Wt. - 47 lbs.
✶ Optional Items:
98C - Stainless Steel Base
98D - Enamel Steel Base

approx. shipping Wt. - 15 lbs.
approx. shipping Wt. - 16 lbs.

(Enamel Steel Bases are constructed of heavy cold rolled steel and finished in light gray baked
enamel. Base raises tank height to 37”.)

98E - Stainless Steel Overall Tank Cover approx. shipping Wt. - 5 lbs.
98F - 5 Gallon Insert Tank Cover approx. shipping Wt. - 2 lbs.
Shown: 98A Stainless Steel Tank with 98C Stainless Base

DARK ROOM TIMER

SOLUTION AGITATORS

For accurate timing of intervals up
to 30 minutes. An adjustable stop
makes it easy to set repeated time
intervals. Operation is simple: setting the timer winds the mechanism,
a gong signals the end of the time
period. Dial glows in the dark for
easy reading.

All Stainless Steel. Rod is welded
to perforated bottom plate for
hanging. Electro-polished finished.

175 - Stainless Steel Solution
Agitators
approx. shipping Wt. -7 lbs.
Minimum order of 2

839A - Darkroom Timer

approx.

shipping Wt. -3 lbs.

THERMOMETERS
DIAL THERMOMETERS
Constructed entirely of Stainless Steel. Easy reading 1.75” diameter dial. Stem is 6” long and .125” in diameter. Thermometer can be hooked onto the insert or ordered with a plastic float.
837 - Dial Thermometer
837C - Dial Thermometer with Float

FLOATING GLASS THERMOMETER
A sensitive X-Ray Thermometer enclosed in a glass case, weighted so that the thermometer floats upright.
Easy to read scale marked at 680 F. Eye at top allows thermometer to be hung.
838- Floating Glass Thermometer
Minimum order of 6

DIGITAL HAND-HELD THERMOMETERS
A battery powered hand-held thermometer with LED readout. Comes equipped with one detachable immersion probe. ±.5% accuracy.
Range: 32 - 2 300F/0 - 1100C
SS07-402 - Digital Thermometer
SS07-403 - Extra Immersion Probe
G - 11

LIGHT LOUVERS

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

Darkroom and fluoroscopic rooms require these louvers to obtain fresh air without
light. Louvers are made of steel finished with a non-reflecting black baked enamel.
They are 1.375” thick and can be built into a wall or door. Available in four stock
sizes.
LIGHTPROOF LOUVERS
APPROX.
EXTERIOR D IM
WIDTH H EIGHT D EPTH SHIP WT

12”
12”
12”
24”

12”
18”
24”
24”

3.75”
3.75”
3.75”
3.75”

13 lbs
20 lbs
24 lbs
45 lbs

CATALOG
NO.

965A
965B
965C
965D

DEVELOPING HANGERS
These durable stainless steel hangers are passivated and electropolished. The upper
clips and cross bar springs provide tension to keep the film flat without tearing. The
two bottom clips hold the film at the lowest possible position at the bottom of the
tank. 14”x36” hangers are designed to have the film looped around the bottom of
the hanger and clipped at the top in order to fit a standard 5 gallon tank.
There is a nominal packing charge if ordering less than twelve hangers (mixed sizes
acceptable).
DEVELOPING HANGERS
FILM SIZE

5”
8”
10”
11”
14”
7”
14”

x
x
x
x
x
x
x

7”
10”
12”
14”
17”
17”
36”

APPROX. CATALOG
SHIP WT
NO.

2 lbs
2 lbs
2 lbs
2 lbs
2 lbs
2 lbs
5 lbs

805
808
810
811
814
815
836

HANGER STORAGE RACK
25 HANGER CAPACITY
Each rack holds up to 25 assorted sizes of hangers and is easily mounted on any dark
room wall.

Finish: Stainless Steel units are polished to a satin finish. Baked Enamel units: light gray .
WIDTH

HGT

15.625” 5.5”

170 - Baked Enamel Hanger Storage Rack approx. shipping Wt. - 4 lbs.
170S - Stainless Steel Hanger Storage Rack approx. shipping Wt. - 4 lbs.

G - 12

DEPTH

10”

QUICKDRY - FILM DRYERS

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

12 FILM CAPACITY
THERMOSTATICALLY CONTROLLED
STAINLESS STEEL or BAKED ENAMEL
AVAILABLE WITH AUTOMATIC TIMER

CHOICE OF LEFT HAND DOOR or RIGHT HAND D OOR
or SPLIT DOUBLE DOORS

The QUICKDRY Dryer can be placed on the floor or on a table. It will economically deliver clean, warm air for fast drying and is thermostatically controlled to
prevent dangerous overheating. The air recirculating system keeps heat inside the
dryer and speeds drying in any weather. A heavy duty timer (120T) is also available.
The cabinet is cold rolled steel with a baked enamel finish or polished Stainless
Steel. The hanger rack is constructed of heavy Stainless Steel and will hold twelve
14”x17” hangers. The bottom is covered by a removable Drip Tray. Doors are reinforced and available in your choice of right hand opening, left hand opening, or
split double doors. Right hand units have hinges located on the right side of the
door and the door opens from left to right. Left hand units have hinges on the left
side of the door and open from right to left.
ALL DRYERS OPERATE
special order.

118volts 60HZ-AC 6

AMPS .

Other voltages available on

Finish: Stainless Steel units are polished to a satin finish. Baked Enamel units: light gray .

✶ Optional Items: 120T: Built in Heavy Duty Timer

Shown: 119 Right Hand Door
WIDTH

23”

HGT

33.5”

STAINLESS STEEL FINISH

BAKED ENAMEL FINISH

DEPTH

17.75”

DESCRIPTION

Right Hand
Left Hand
Double Door

approx. shipping Wt. - 67 lbs.

CATALOG
NO

DESCRIPTION

Right Hand
Left Hand
Double Door

119
119L
119D

CATALOG
NO

119S
119LS
119DS

FILM DRYING RACKS
FOLDING DRYING RACK
12 HANGER CAPACITY

FOLD AWAY TRAY

EASY WALL MOUNTING

The Folding Drying Rack, constructed entirely of polished Stainless Steel, holds twelve
14”x17” hangers. A solid Stainless Steel back protects the wall at all times and the 20” x
17” tray can be folded up against the back for extra convenience when not in use. It can
be mounted quickly and easily in any location. The rack is 23” high, 20” wide and 17”
deep with the tray in the open position.

174A - Folding Drying Rack

approx. shipping Wt. - 13 lbs.
WIDTH

HGT

DEPTH

20”

23”

17”

WALL DRYING RACK
A drying rack of polished Stainless Steel. Holds 12 developing
hangers at an angle for quick drainage. Holes provided for easy
wall mounting.

172 - Wall Drying Rack

approx. shipping Wt. - 2 lbs.

G - 13

WIDTH

HGT

19.75”

2”

DEPTH

2”

FILM DRYERS

8 0 0 / 3 4 7 - X R AY

S & S X-RAY PRODUCTS
w w w . s s x ra y. c o m

THERMOSTATICALLY CONTROLLED
12 or 15 FILM CAPACITY
STAINLESS STEEL or BAKED ENAMEL
AVAILABLE WITH FORMICA TOPS
AVAILABLE WITH AUTOMATIC TIMER
HIGH EFFICIENCY

This is the small dryer with large dryer features. Scientific air circulation design
creates fast drying at high efficiency. Cabinets of polished Stainless Steel or cold
rolled steel are available both in twelve and fifteen film capacities.
Film hangers fit into specially slotted holders that keep them separated and vertical at all times. All interior parts are made of Stainless Steel. The drawer opens its
full width on ball bearing extension slides. The Stainless Steel drip pan moves with
the drawer and is always under the wet film.
The drying system includes a heavy duty motor and fan plus a thermostatically
controlled 750 watt sealed heating unit separately controlled but interlocked so
that the heater will not function without the fan. A heavy duty timer (120T) is also
available. The air system recirculates the same heated air many times, thereby
obtaining additional drying without additional heat and reducing the heat exhausted into the darkroom, so that normal ventilation is usually sufficient without additional ducts. A pre-set thermostat prevents overheating.
Cabinets are constructed of heavy gauge material welded together for strength.
ALL DRYERS OPERATE
special order.

118 volts 6 0HZ AC 6

AMPS.

Other voltages available on

12 Film Dryer
WIDTH

HGT

22.5” 33”

DEPTH

15”

With Base 36.5” High

With or without optional base these dryers can be matched with other 15” cabinets
(see page G-9).
Finish: Stainless Steel units are polished to a satin finish. Baked Enamel units: Standard finish - light gray baked enamel. Optional Formica Tops are white.

✶ Optional Items:

Base: Designed to raise the dryer 3.5” to provide toe kick space and
match 15” Darkroom Cabinets with bases.
Top: Formica Dryer Tops are .75” thick and provide a non-marring work
surface.
120T: Built in Heavy Duty Timer

FILM DRYER - STAINLESS STEEL FINISH
DESCRIPTION

12 FILM DRYER
Dryer
Dryer W/ Bas e
Dryer W/ Top
Dryer W/ Top & Bas e
15 FILM DRYER
Dryer
Dryer W/ Bas e
Dryer W/ Top
Dryer W/ Top & Bas e

APPROX.
SHIP WT

CATALOG
NO

73 lbs
85 lbs
80 lbs
92 lbs

120S
120SB
121AS
121ASB

100 lbs
115 lbs
110 lbs
125 lbs

150S
150SB
151S
151SB

FILM DRYER - BAKED ENAMEL FINISH
DESCRIPTION

12 FILM DRYER
Dryer
Dryer W/ Bas e
Dryer W/ Top
Dryer W/ Top & Base
15 FILM DRYER
Dryer
Dryer W/ Bas e
Dryer W/ Top
Dryer W/ Top & Base

APPROX.
SHIP WT

CATALOG
NO

73 lbs
73 lbs
80 lbs
92 lbs

120
120B
121A
121AB

100 lbs
115 lbs
110 lbs
125 lbs

150
150B
151A
151B

G - 14

15 Film Dryer
WIDTH

22.5”

HGT

DEPTH

33”

24”

With Base 36.5” High

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2000:06:20 16:26:47
Producer                        : Acrobat Distiller 4.05 for Windows
Modify Date                     : 2000:12:22 10:38:43-05:00
Title                           : S&S X-Ray Products Catalog
Page Count                      : 79
Page Mode                       : UseOutlines

EXIF Metadata provided by EXIF.tools

S&S X Ray Products Catalog MV400 Sscat

Navigation menu

Versions of this User Manual:

Views

Navigation