Discovery Kit With STM32F407VG MCU Stm32f407 User Manual

• Figure 1. STM32F4DISCOVERY
• 1 Features
• 2 Product marking
• 3 Ordering information
  • Table 1. List of the order codes
• 4 Conventions
  • Table 2. ON/OFF conventions
• 5 Quick start
  • 5.1 Getting started
  • 5.2 System requirements
  • 5.3 Development toolchains supported
• 6 Hardware and layout
  • Figure 2. Hardware block diagram
  • Figure 3. Top layout
  • Figure 4. Bottom layout
  • 6.1 Embedded ST-LINK/V2 (or V2-A)
    • Table 3. Jumper states
    • 6.1.1 Drivers
      • Figure 5. Updating the list of drivers in Device Manager
    • 6.1.2 ST-LINK/V2 (or V2-A) firmware upgrade
    • 6.1.3 ST-LINK/V2-A VCP configuration
      • Figure 6. ST-LINK VCP connection to USART2
    • 6.1.4 Using ST-LINK/V2 (or V2-A) to program/debug the STM32F4 on board
      • Figure 7. STM32F4DISCOVERY connections
    • 6.1.5 Using ST-LINK/V2 (or V2-A) to program/debug an external STM32 application
      • Table 4. Debug connector CN2 (SWD)
      • Figure 8. ST-LINK connections
  • 6.2 Power supply and power selection
  • 6.3 LEDs
  • 6.4 Pushbuttons
  • 6.5 On board audio capability
  • 6.6 USB OTG supported
  • 6.7 Motion sensor (ST MEMS LIS302DL or LIS3DSH)
  • 6.8 JP1 (Idd)
  • 6.9 OSC clock
    • 6.9.1 OSC clock supply
    • 6.9.2 OSC 32 KHz clock supply
  • 6.10 Solder bridges
    • Table 5. Solder bridges (continued)
  • 6.11 Extension connectors
    • Table 6. STM32 pin description versus board functions (continued)
• 7 Electrical schematics
  • Figure 9. STM32F407G-DISC1
  • Figure 10. ST-LINK/V2 (SWD only)
  • Figure 11. MCU
  • Figure 12. Audio
  • Figure 13. USB_OTG_FS
  • Figure 14. Peripherals
• 8 Mechanical drawing
  • Figure 15. STM32F4DISCOVERY mechanical drawing
• 9 Revision history
  • Table 7. Document revision history