SY7201 Datasheet. Www.s Manuals.com. Silergy

User Manual: Marking of electronic components, SMD Codes DQ, DQ**, DQ***, DQ-**, DQ-***, DQQ, DQR. Datasheets 2SD2211, BD4834FVE, BD4834G, BZT52H-B7V5, MAX6314US26D2-T, RT9014-JNPQW, RT9198-28PB, SY7201.

Open the PDF directly: View PDF .
Page Count: 5

Download
Open PDF In Browser	View PDF

SY7201
30V High Current Boost LED Driver
Preliminary Specification

General Description

Features

SY7201 is a DC/DC step-up converter that delivers an
accurate constant current for driving LEDs. Operation
at a fixed switching frequency of 1MHz allows the
device to be used with small value external ceramic
capacitors and inductor. LEDs connected in series are
driven with a regulated current set by the external
resistor. The SY7201 is ideal for driving up to eight
white LEDs in series or up to 30V.

•
•
•
•
•
•
•
•

Input voltage range 2.5V to 9V
Switch current limit 2A
Drives LED strings up to 30V
1MHz fixed frequency minimizes the external
components
Internal softstart limits the inrush current
Open LED overvoltage protection
RoHS Compliant and Halogen Free
Compact package: SOT23-6 pin

Applications
Ordering Information

• GPS Navigation Systems
• Handheld Devices
• Portable Media Players

SY7201□
□(□□
□□)□
□□ □
Temperature Code
C: - 40°C~85°C
Package Code
AB: SOT23-6
Spec Code

Typical Applications
L

D

Vin

Vout
Cin

IN
Dimming

EN/PWM
GND

Cout

LX
OVP
FB

R1
Figure 1. Schematic Diagram

SY7201 Rev. 0.1

Silergy Corp. Confidential- Prepared for Customer Use Only

1

SY7201
Pinout (top view)
LX

1

6

IN

GND

2

5

OVP

FB

3

4

EN/PWM

(SOT23-6)
Top Mark: DQxyz (Device code: DQ, x=year code, y=week code, z= lot number code)
Pin Name
LX
GND

Pin Number
1
2

FB

3

EN/PWM

4

OVP
IN

5
6

Pin Description
Inductor node. Connect an inductor between IN pin and LX pin.
Ground pin.
Feedback pin. Connect a resistor R1 between FB and GND to program
the output current: IOUT=0.2V/R1.
Enable and dimming control. The recommended PWM frequency
should be higher than 20kHz.
Over voltage protection. The value is 33V.
Input pin. Decouple this pin to GND pin with 1uF ceramic capacitor.

Absolute Maximum Ratings (Note 1)
IN, ------------------------------------------------------------------------------------------------------------------- 10V
LX, OVP ---------------------------------------------------------------------------------------------------------- 36V
All other pins ------------------------------------------------------------------------------------------------------- 6V
Power Dissipation, PD @ TA = 25°C, SOT23-6 --------------------------------------------------------------- 0.4W
Package Thermal Resistance (Note 2)
SOT23-6, θJA -------------------------------------------------------------------------------------------- 250°C/W
SOT23-6, θJC -------------------------------------------------------------------------------------------- 130°C/W
Junction Temperature Range ------------------------------------------------------------------------------------ 150°C
Lead Temperature (Soldering, 10 sec.) ------------------------------------------------------------------------- 260°C
Storage Temperature Range ------------------------------------------------------------------------------------- -65°C to 150°C
ESD Susceptibility (Note 2)
HBM (Human Body Mode) ------------------------------------------------------------------------------------- 2kV
MM (Machine Mode) -------------------------------------------------------------------------------------------- 200V

Recommended Operating Conditions (Note 3)
IN, ------------------------------------------------------------------------------------------------------------------- 2.5V to 9V
LX, OVP ----------------------------------------------------------------------------------------------------------- 2.5V to 30V
All other pins ------------------------------------------------------------------------------------------------------ 0 to 3.6V
Junction Temperature Range ------------------------------------------------------------------------------------ -40°C to 125°C
Ambient Temperature Range ----------------------------------------------------------------------------------- -40°C to 85°C

SY7201 Rev. 0.1

Silergy Corp. Confidential- Prepared for Customer Use Only

2

SY7201
Electrical Characteristics
(VIN = 3.6V, TA = 25°C, unless otherwise specified)

Parameter
Input Voltage Range
Quiescent Current
Shutdown Current
Feedback Reference Voltage
FB Input Current
Low Side Main FET RON
Main FET Current Limit
EN Rising Threshold
EN Falling Threshold
Input UVLO threshold
UVLO hysteresis
Oscillator Frequency
Min On Time
Max Duty Cycle
Thermal Shutdown
Thermal Hysteresis
Output Clamp voltage

Symbol
VIN
IQ
ISHDN
VREF
IFB
RDS(ON)
ILIM
VENH
VENL
VUVLO
VHYS
FOSC

TSD
THYST
VOCL

Conditions

Min
2.5

FB=0.3V
EN=0
196

Typ
0.1
10
200

FB=0.3V

Max
9.0
0.6
15
204
1

200
2
1.5
0.4
2.4
IOUT=100mA

“Open LED”

0.1
1.0
100
90
150
20
33

Unit
V
mA
uA
mV
uA
mΩ
A
V
V
V
V
MHz
ns
%
℃
℃
V

Note 1: Stresses listed as the above “Absolute Maximum Ratings” may cause permanent damage to the device.
These are for stress ratings. Functional operation of the device at these or any other conditions beyond those
indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating
conditions for extended periods may remain possibility to affect device reliability.
Note 2: θ JA is measured in the natural convection at TA = 25°C on a low effective single layer thermal
conductivity test board of JEDEC 51-3 thermal measurement standard. Pin 2 of SOT23-6 packages is the case
position for θ JC measurement.
Note 3: The device is not guaranteed to function outside its operating conditions.

SY7201 Rev. 0.1

Silergy Corp. Confidential- Prepared for Customer Use Only

3

SY7201
SOT23-6 Package outline & PCB layout design

1.90

1.50 - 1.70

1.00

2.70 - 3.00

2.40

2.80 - 3.10

0.95

0.60

0.30 - 0.50

0.01 - 0.1

0.1 - 0.15

0.25 REF

Recommended Pad Layout

1.0 - 1.3

0.95 TYP

0.3 - 0.6

1.90 TYP

Notes: All dimensions are in millimeters.
All dimensions don’t include mold flash & metal burr.

SY7201 Rev. 0.1

Silergy Corp. Confidential- Prepared for Customer Use Only

4

www.s-manuals.com



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : GPL Ghostscript 8.70
Modify Date                     : 2013:08:07 19:41:27+03:00
Create Date                     : 2010:07:15 08:36:24+08:00
Creator Tool                    : PDFCreator Version 0.9.9
Metadata Date                   : 2013:08:07 19:41:27+03:00
Document ID                     : 85f94b75-9204-11df-0000-84410cd6dafe
Instance ID                     : uuid:b941cccd-e65f-4453-aff5-af21778247a1
Format                          : application/pdf
Title                           : SY7201 - Datasheet. www.s-manuals.com.
Creator                         : 
Description                     : ()
Subject                         : SY7201 - Datasheet. www.s-manuals.com.
Page Count                      : 5
Keywords                        : SY7201, -, Datasheet., www.s-manuals.com.
Warning                         : [Minor] Ignored duplicate Info dictionary

EXIF Metadata provided by EXIF.tools