TC KB920S Tckb920s
User Manual: TC-KB920S
Open the PDF directly: View PDF 
.
Page Count: 38
| Download | |
| Open PDF In Browser | View PDF |
TC-KB920S SERVICE MANUAL Dolby noise reduction and HX Pro headroom extension manufactured under license from Dolby Laboratories Licensing Corporation. HX Pro originated by Bang & Olufsen. “DOLBY”, the double-D symbol a, and “HX PRO” are trademarks of Dolby Laboratories Licensing Corporation. AEP Model E Model Australian Model Model Name Using Similar Mechanism Tape Transport Mechanism Type TC-KE500S TCM-190VB14 SPECIFICATIONS – Continued on next page – STEREO CASSETTE DECK MICROFILM Flexible Circuit Board Repairing • Keep the temperature of the soldering iron around 270 ˚C during repairing. • Do not touch the soldering iron on the same conductor of the circuit board (within 3 times). • Be careful not to apply force on the conductor when soldering or unsoldering. Notes on chip component replacement • Never reuse a disconnected chip component. • Notice that the minus side of a tantalum capacitor may be damaged by heat. MODEL IDENTIFICATION – BACK PANEL – 3-020-984- AEP Model :0π Australian Model :2π Malaysia, Singapore Model: 3 π SAFETY-RELATED COMPONENT WARNING!! COMPONENTS IDENTIFIED BY MARK ! OR DOTTED LINE WITH MARK ! ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY. –2– TABLE OF CONTENTS 1. GENERAL ................................................................... 4 2. DISASSEMBLY ......................................................... 5 3. MECHANICAL ADJUSTMENTS ....................... 9 4. ELECTRICAL ADJUSTMENTS ......................... 10 5. DIAGRAMS 5-1. Note for Printed Wiring Boards and Schematic Diagrams ....................................................... 14 5-2. Printed Wiring Boards – MD Section – ......................... 15 5-3. Schematic Diagram – MD Section – .............................. 17 5-4. Printed Wiring Board – MAIN Section – ...................... 19 5-5. Schematic Diagram – MAIN Section – (1/2) ................. 21 5-6. Schematic Diagram – MAIN Section – (2/2) ................. 23 5-7. Printed Wiring Board – DOLBY-S Section – ............... 25 5-8. Schematic Diagram – DOLBY-S Section – .................. 25 5-9. Printed Wiring Boards – POWER Section – ................. 27 5-10. Schematic Diagram – POWER Section – ...................... 28 5-11. Printed Wiring Boards – PANEL Section – .................. 29 5-12. Schematic Diagram – PANEL Section – ........................ 31 5-13. IC Pin Function Description ........................................... 33 6. EXPLODED VIEWS ................................................ 35 7. ELECTRICAL PARTS LIST ............................... 40 –3– SECTION 1 GENERAL LOCATION OF CONTROLS 1 I/O (Power) button 9 § EJECT button 2 Remote control sensor !º AUTO CAL button 3 PHONES jack !¡ DOLBY NR switch 4 Display panel !™ BIAS control 5 Tape operation buttons !£ BALANCE control AMS* 0 button !¢ CAL REC LEVEL control · button !∞ MONITOR button AMS* ) button !§ REC LEVEL control p button P PAUSE button * AMS is an abbreviation for Automatic Music Sensor. R REC MUTING button r REC button 6 Tape counter 7 Counter buttons RESET button MEMORY button 8 Cassette holder –4– SECTION 2 DISASSEMBLY Note: Follow the disassembly procedure in the numerical order given. CASE Unscrew the four case attachment seven tapping screws and remove the case. FRONT PANEL SECTION 1 three flat cables (CN803 – 805) 2 five connectors (CNP301 – 303, 305, 306) 2 connector (CN704) 4 claw 3 screw (BVTP3 × 8) 3 four screws (BVTP3 × 8) 2 two connectors (CNP304, CN801) 4 claw 5 front panel section MD ASS’Y SECTION 6 Remove the MD ass’y section to direction of arrow A. 4 two screws (BVTT2.6 × 8) A 2 two claws 3 cassette lid ass’y 5 two screws (BVTP2.6 × 8) 1 Push the eject button. 2 two claws –5– MAIN BOARD 4 two screws (BVTP3 × 8) 6 MAIN board 3 bracket (TR) 2 screw (BV/ring) 4 screw (BV/ring) 1 connector (CN701) 5 three PC board holders CASSETTE HOLDER (R) ASS’Y 4 cassette holder (R) ass’y 1 torsion spring 2 boss 3 shaft –6– FITTING BASE BLOCK 1 three screws (PTPWH2 × 23) 2 fitting base block Note: When installing, pull the FR belt and put around the claws as shown below. Note: When installing, pull the capstan belt and put around the claws as shown below. HEAD 2 erase head 3 washer 1 screw (B2 × 4) 7 three RPH springs 4 five screws (B2 × 4) 6 head blacket 5 record/ playback head –7– AUDIO BOARD AND MOTOR 2 flexible board (CNP72) 1 connector (CNP71) 6 capstan motor 3 claw 5 two screws (B2.6 × 3) 4 audio board 8 reel motor 0 ground plate 9 belt (FR) 7 two screws (P2.6 × 2.8) –8– SECTION 3 MECHANICAL ADJUSTMENTS PRECAUTION 1. Clean the following parts with a denatured alcohol-moistened swab: record/playback/erase head pinch roller rubber belts capstan idler 2. Demagnetize the record/playback head with a head demagnetizer. (Head demagnetizer do not approach for the erase head.) 3. Do not use a magnetized screwdriver for the adjustment. 4. After the adjustments, apply suitable locking compound to the parts adjusted. 5. The adjustments should be performed with the rated power supply voltage unless otherwise noted. 2) Declination Adjustment: While in the record/playback position, set the back tension to 0 (wind the supply reel with something thin like a pencil in a counterclockwise direction) and make sure there is no curling or shifting (shifting up/shifting down) at the guide of the record/playback head. Because shifting can only occur due to a difference in the width of the tape and that of the tape guides (curling will otherwise occur), it is necessary to pay close attention since it can be easily overlooked. When there is a shift, tighten screws B and C equally and change the declination of the head. If the tape is shifting up, tighten the screws, and if it is shifting down, loosen them. Repeat the adjustments in steps 1) to 2) and fine adjust the height and the declination. • Torque Measurement Mode Torque Meter Meter Reading Forward CQ-102C 30 to 65 g•cm (0.42 to 0.90 oz•inch) Forward back tension CQ-102C 1 to 6 g•cm (0.014 to 0.08 oz•inch) CQ-201B 70 to 120 g•cm (0.98 to 1.66 oz•inch) FF/REW Adjustment Location: – record/playback head – A B Record/Playback Head Height/Declination Adjustment Procedures: 1. Test cassette: CQ-009C 2. Insert the mirror cassette and put the unit in record/Playback mode. 1) Height Adjustment: Check to see if the tape is curling at the tape guide of the head. If it is curling, tighten screws A, B and C, respectively by the same angle, moving the head so that it remains at the same angle throughout the procedure. If it curls on the bottom side of the mirror cassette (actually the inner side), tighten all the screws equally; but loosen them if the tape begins to curl on the top side. (outer side.) inside outside Normal (Record/playback head as seen from the side of the erasehead.) Curling on the inner side Tighten screws A, B and C. Curling on the outer side Loosen screws A, B and C. –9– C SECTION 4 ELECTRICAL ADJUSTMENTS Note: The adjustment should be performed in the order given in the service manual. As a rule, adjustments about playback should be performed before those about recording. The adjustments should be performed before for both L-CH and RCH. • Switches and controls should be set as follows unless otherwise specified. DOLBY NR, MPX FILTER switch: OFF MONITOR switch: Tape • Standard Record: Deliver the standard input signal level to the input jack and set the REC LEVEL control to obtain the standard output signal level. – Record Mode – Record/Playback Head Azimuth Adjustment Procedure: 1. Mode: FWD playback Test tape P-4-A100 (10 kHz, –10 dB) level meter 47 k Ω + – set LINE OUT 2. Turn the adjustment screw for the maximum output levels. If these levels do not match, turn the adjustment screw until both of output levels match together within 1 dB. AF OSC level meter 10 k Ω attenuator 600 Ω LINE IN 47 k Ω within 1dB output level LINE OUT 0 dB=0.775 V Screw position Standard Input Level input terminal within 1dB L-CH peak + – set R-CH peak angle L-CH peak R-CH peak LINE IN source impedance 10 kΩ input signal level 0.5 V (–3.8 dB) 3. Phase Check Mode: playback Standard Output Level output terminal LINE OUT load impedance 47 kΩ output signal level 0.5 V (–3.8 dB) test tape P-4-A100 (10 kHz, –10 dB) Test Tape Type Signal Used for P-4-A100 10 kHz, –10 dB Azimuth Adjustment P-4-L300 315 Hz, 0 dB Playback Level Adjustment WS-48B 3 kHz, 0 dB Tape Speed Adjustment oscilloscope L-CH 47 k Ω set 47 k Ω V + – + – H R-CH LINE OUT Screen pattern in phase 45 ° Good 90 ° 135 ° 180 ° Wrong 4. After the adjustment, lock the screw with locking compound. Adjustment Location: Record/Playback head Adjustment screw – 10 – Tape Speed Adjustment Procedure: Mode: playback Bias Consumption Current Adjustment Procedure: LINE IN (no signal) test tape WS-48B (3 kHz, 0 dB) digital voltmeter CS-413 blank tape 47 k Ω L-CH 47 k Ω set + – set TP321 – + R-CH frequency counter 3 2 1 LINE OUT B+ (+7.5 V) 1. Set to FWD playback mode. 2. Adjust RV71 so that the frequency counter reading becomes 3,000±90 Hz. 3. Frequency difference between the beginning and the end of the tape should be within 3%. 1. Set RV103 (L-CH) and RV203 (R-CH) to mechanical center and turn the set recording mode. 2. Connect digital voltmeter as shown by the following table. 3. Adjust the following transformers for the minimum readings on the digital voltmeter. Adjustment Location: AUDIO board (See page 12.) Sample value of Wow and Flutter: 0.3% or less W.RMS (JIS) (WS-48B) Playback Level Adjustment Procedure: Mode: playback Measurement Point Adjustment Part Value L-CH 2 and 3, TP321 T101 1 and 2, TP321 minimum R-CH T201 Adjustment Location: MAIN board (See page 12.) test tape P-4-L300 (315 Hz, 0 dB) Record Bias Adjustment Setting: REC LEVEL control: Standard Record (See page 10.) level meter 47 k Ω Procedure: 1. Mode: record and playback + – set LINE OUT AF OSC Adjust RV121 (L-CH) and RV221 (R-CH) so that the reading on level meter meets the adjustment limits below. Attenuator LINE IN 315 Hz 50 mV (–23.8 dB) 10 kHz 10 k Ω CS-123 blank tape 600 Ω Adjustment Limits: LINE OUT level: –7.7±0.5 dB (0.301 to 0.338 V) Level difference between channels: within 0.5 dB Check that the LINE OUT level does not change even if Playback and Stop operation is repeated several times. level meter set 47 k Ω + – Adjustment Location: MAIN board (See page 12.) LINE OUT 2. Adjust RV103 (L-CH) and RV203 (R-CH) so that 10 kHz playback output is 0±0.3 dB relative to the 315 Hz output. Adjustment Location: MAIN board (See page 12.) – 11 – Record Level Adjustment Setting: REC LEVEL control: Standard Record (See page 10.) Adjustment Location: [MAIN BOARD] – COMPONENT SIDE – RV103 Procedure: 1. Mode: record and playback RV203 LINE IN 315 Hz, 50 mV (–23.8 dB) AF OSC 10 k Ω Attenuator T101 13 TP301 T201 CS-123 blank tape 600 Ω level meter RV306 RV221 RV121 set 47 k Ω RV202 RV201 RV101 RV102 + – LINE OUT 2. Adjust RV101 (L-CH) and RV201 (R-CH) so that the reading on level meter meets the adjustment limits below. J301 DOLBY-S BOARD Adjustment Limits: –23.8±0.5 dB (47.2 to 53 mV) [AUDIO BOARD] – COMPONENT SIDE – Adjustment Location: MAIN board Record EQ (IV) Adjustment Setting: REC LEVEL control: Standard Record (See page 10.) CNP73 Procedure: 1. Mode: record and playback AF OSC Attenuator RV71 LINE IN 315 Hz 50 mV (–23.8 dB) 10 kHz 10 k Ω CNP71 CS-123 blank tape 600 Ω level meter CNP72 set 47 k Ω + – LINE OUT 2. Adjust RV102 and RV202 so that they become maximum. 3. Adjust RV102 (L-CH) and RV202 (R-CH) so that the difference between R-CH and L-CH at 10 kHz is within 1 dB. 4. Adjust RV306 so that the R-CH meet the specification. Adjustment Limits: 10 kHz level difference against 315 Hz reference. 0±1.0 dB Adjustment Location: MAIN board – 12 – SECTION 5 DIAGRAMS • Circuit Boards Location 5-1. NOTE FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS • Abbreviation AUS : Australian MY : Malaysia SP : Singapore (In addition to this, the necessary note is each block.) AC POWER board TRANSFORMER board (AEP, AUS) AUDIO board HP board DOLBY-S boards Note on Schematic Diagram: • All capacitors are in µF unless otherwise noted. pF: µµF 50 WV or less are not indicated except for electrolytics and tantalums. • All resistors are in Ω and 1/4 W or less unless otherwise specified. ¢ • : internal component. • 2 : nonflammable resistor. • 5 : fusible resistor. • C : panel designation. Note: The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. • • • • PANEL board • LEAF SW board MAIN board REC VOL board TRANS 1 board (MY, SP) • TRANS 2 board (MY, SP) • • • – 13 – U : B+ Line. V : B– Line. H : adjustment for repair. Voltages and waveforms are dc with respect to ground under no-signal conditions. no mark : PB ( ) : REC Voltages are taken with a VOM (Input impedance 10 MΩ). Voltage variations may be noted due to normal production tolerances. Waveforms are taken with a oscilloscope. Voltage variations may be noted due to normal production tolerances. Circled numbers refer to waveforms. Signal path. E : PB a : REC Abbreviation AUS : Australian model. MY : Malaysia model. SP : Singapore model. Note on Printed Wiring Boards: • X : parts extracted from the component side. • Y : parts extracted from the conductor side. • b : Pattern from the side which enables seeing. • Abbreviation AUS : Australian model. MY : Malaysia model. SP : Singapore model. • Indication of transistor. Q B C E These are omitted. Q B C E These are omitted. – 14 – TC-KB920S 5-2. PRINTED WIRING BOARDS – MD Section – • See page 13 for Circuit Boards Location. (Page 19) (Page 19) – 15 – – 16 – TC-KB920S 5-3. SCHEMATIC DIAGRAM – MD Section – (Page 24) (Page 24) The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. – 17 – • Waveforms – MAIN BOARD (1/2) – – MAIN BOARD (2/2) – 1 T101 4 7 IC801 #º (XIN) 4 IC304 7, 8 26.4 Vp-p 3.8 Vp-p 6.4 µs 4 MHz 6.4 µs 2 IC304 !¡, !™ 5 T301 1 4.5 Vp-p 148 Vp-p 6.4 µs 6.4 µs 3 T201 4 6 IQ310 C, Q311 C 23.2 Vp-p 30 Vp-p 6.4 µs 4.1 Vp-p 6.4 µs • IC Block Diagram IC803 BA6219B (MAIN BOARD) T.S.D O.C.P MOTOR DRIVE MOTOR DRIVE 2 3 4 5 6 7 8 9 MOTOR DRIVE NOISE FILTER CLAMP FWD.IN REV.IN VCC 1 VCC 2 NOISE FILTER 10 MOTOR DRIVE 1 GND FWD/REV/STOP CONTROL LOGIC – 18 – TC-KB920S 5-4. PRINTED WIRING BOARD – MAIN Section – • See page 13 for Circuit Boards Location. • Semiconductor Location Ref. No. (Page 30) (Page 16) (Page 15) (Page 29) (Page 25) (Page 27) (Page 30) (Page 30) – 19 – (Page 25) (Page 30) (Page 25) (Page 25) – 20 – Location D101 D102 D103 D201 D202 D203 D301 D302 D305 D306 D307 D308 D309 D310 D311 D312 D313 D341 D342 D701 D702 D703 D704 D705 D706 D707 D708 D709 D710 D711 D712 D713 D714 D715 D716 D717 D802 D803 D804 D814 D815 H-4 H-4 H-4 H-5 H-5 H-4 D-1 F-5 G-5 D-5 E-5 D-5 I-6 I-6 H-5 F-5 D-5 D-1 D-2 G-2 H-2 H-2 H-2 G-3 G-3 H-3 I-2 G-1 I-1 F-3 G-2 G-3 H-3 H-3 G-2 G-2 C-4 C-4 C-4 E-5 E-5 IC301 IC302 IC303 IC304 IC305 IC306 IC307 IC308 IC309 C-9 H-7 E-7 B-7 F-4 H-5 E-9 I-6 I-5 Ref. No. Location IC310 IC311 IC701 IC801 IC803 IC804 G-9 G-9 I-3 D-2 F-2 D-4 Q101 Q102 Q103 Q105 Q201 Q202 Q203 Q205 Q301 Q302 Q303 Q304 Q305 Q306 Q307 Q308 Q309 Q310 Q311 Q312 Q313 Q314 Q315 Q316 Q351 Q352 Q353 Q701 Q702 Q703 Q704 Q705 Q706 Q707 Q708 Q802 Q803 Q804 Q806 Q807 Q808 Q809 Q810 Q814 D-9 H-5 H-8 F-7 D-10 I-8 I-8 F-7 G-5 D-6 D-6 D-6 C-6 C-6 A-7 A-7 A-7 C-6 C-6 I-6 I-5 I-5 F-9 D-6 C-3 C-2 C-2 I-3 I-2 I-1 I-2 G-2 G-2 H-3 H-3 C-2 C-3 C-3 F-4 F-4 F-4 F-2 F-2 C-2 TC-KB920S 5-5. SCHEMATIC DIAGRAM – MAIN Section – (1/2) The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. • See page 18 for Waveforms. (Page 31) (Page 26) (Page 31) (Page 26) (Page 23) (Page 26) (Page 23) (Page 26) – 21 – – 22 – TC-KB920S 5-6. SCHEMATIC DIAGRAM – MAIN Section – (2/2) • See page 18 for Waveforms and IC Block Diagram. (Page 28) (Page 31) (Page 28) (Page 22) (Page 17) (Page 17) (Page 31) (Page 22) (Page 31) – 23 – – 24 – The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. TC-KB920S 5-7. PRINTED WIRING BOARD – DOLBY-S Section – • See page 13 for Circuit Boards Location. 5-8. SCHEMATIC DIAGRAM – DOLBY-S Section – (Page 21) (Page 21) (Page 21) (Page 21) (Page 19, 20) • IC Block Diagram HLSOUT ANTSAT RECOUT SCINL SCBOL FBOL TCS1L TCS2L TCF1L TCF2L IREF VCC 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 ANTSAT SLDET FLVCR SLICG SLVCR V TO I CONV H MC FLDET FLICG MC4 MC4 MC3DS MC3DT MC2 MC1 MC1 MC3 VREF & IREF SHDET LFDET 5 6 7 8 TCL1 TCL2 SCINH FHICG 9 10 11 12 13 14 15 TCF1H TCF2H TCS2H TCS1H VCT VEE 3 4 FHDET FBOH 1 2 SHICG SHVCR V TO I CONV H LFIN LFICG ZL1 ZL2 LFVCR FHVCR HLSMP MCTC MC4IN MCBO CXA1917AM-T6 (DOLBY-S BOARD) MC3IN IC1 – 25 – – 26 – TC-KB920S 5-10. 5-9. PRINTED WIRING BOARDS – POWER Section – • See page 13 for Circuit Boards Location. SCHEMATIC DIAGRAM – POWER Section – (Page 27) (Page 24) (Page 19) (Page 27, 28) (Page 24) (Page 27) The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. (Page 27) (Page 19) (Page 27) – 27 – – 28 – TC-KB920S 5-11. PRINTED WIRING BOARDS – PANEL Section – • See page 13 for Circuit Boards Location. (Page 20) (Page 19) (Page 20) (Page 19) (Page 19) – 29 – – 30 – TC-KB920S 5-12. SCHEMATIC DIAGRAM – PANEL Section – (Page 24) (Page 23) (Page 22) (Page 21) (Page 23) – 31 – – 32 – 5-13. IC PIN FUNCTION DESCRIPTION • MAIN BOARD IC801 M38172M4-171FP (SYSTEM CONTROLLER) Pin No. Pin Name I/O Function 1 T.REEL I Take-up reel rotation pulse input from the rotation detect sensor (IC82) 2 S.REEL I Supply reel rotation pulse input from the rotation detect sensor (IC81) 3 METER.LCH I Signal input for the level meter drive (L-ch) 4 METER.RCH I Signal input for the level meter drive (R-ch) 5 AMS.IN I Auto music sensor signal input terminal “H”: AMS detect 6 DOOR/STOP.SW I Mechanism stop detect switch (S81) input terminal 7 CLOSE.SW I Not used (fixed at “H”) Pin No. Pin Name I/O 43 SEG.DOL.C O Segment drive signal output to the fluorescent indicator tube (VFD901) (for DOLBY NR C light up) 44 SEG.DOL.B O Segment drive signal output to the fluorescent indicator tube (VFD901) (for DOLBY NR B light up) 45 SEG.PROPER O Segment drive signal output to the fluorescent indicator tube (VFD901) (for TYPE I, II light up) 46 SEG.FIL.ON/OFF O Multiplex filter on/off control signal output or segment drive signal output to the fluorescent indicator tube (VFD901) (for FILTER light up) “H”: multiplex filter on 47 SEG.DOL.S. ON/OFF O Dolby S type on/off selection signal output to the CXA1563S (IC302, 307) or segment drive signal output to the fluorescent indicator tube (VFD901) (for DOLBY NR S light up) “L”: dolby S on Not used (open) 8 OPEN.SW I Not used (fixed at “H”) 9 CAM.SW3 I Not used (fixed at “H”) 10 CAM.SW2 I Not used (fixed at “H”) 11 CAM.SW1 I Not used (fixed at “H”) 48 NC O SEG01 O 12 CAM.SW0 I Not used (fixed at “H”) 49 13 CAP.M ON/OFF O Capstan motor (M902) on/off control signal output terminal “H”: motor on 50 SEG02 O 14 ASIST.M.UP O Assist motor drive signal output terminal Not used (pull down) 51 SEG06 O 15 ASIST.M.DOWN O Assist motor drive signal output terminal Not used (pull down) 52 SEG07 O 16 REEL.M.FWD O Reel motor (M901) drive signal output to the BA6219B (IC803) 53 SEG03 O 17 REEL.M.REV O Reel motor (M901) drive signal output to the BA6219B (IC803) 54 SEG05 O 18 EJECT.V (6.5V) O Reel motor (M901) eject control signal output terminal “H” active 55 SEG04 O SEG08 O 19 FF/REW.V (4.4V) O Reel motor (M901) FF/REW control signal output terminal “H” active 56 20 PLAY.V (2.5V) O Reel motor (M901) play control signal output terminal “H” active 57 SEG16 O 21 TYPE.IV I Metal detect switch (S83) input terminal “H”: metal 58 SEG09 O 22 HALF.SW I Half detect switch input terminal Not used (fixed at “H”) 59 SEG10 O 60 SEG14 O 23 TYPE.II I CrO detect switch (S82) input terminal “H”: CrO2 24 TAB.SW I Not used (fixed at “H”) 61 SEG15 O 25 POWER.IN I AC in detect signal input terminal “H”: AC in 62 SEG11 O SEG13 O 2 Function Segment drive signal output to the fluorescent indicator tube (VFD901) 26 SIRCS.IN I Sircs signal input from the remote control receiver (IC901) 63 27 RESET I System reset signal input from the reset signal generator (IC804) “L”: reset “L” is input for several 100 msec after power on, then it changes to “H” 64 SEG12 O 65 SEG.CAL O Segment drive signal output to the fluorescent indicator tube (VFD901) (for CAL light up) 28 XCIN I Sub system clock input terminal Not used (fixed at “L”) 29 XCOUT O Sub system clock output terminal Not used (open) 66 SEG.I O Recording equalizer type I select signal output or segment drive signal output to the fluorescent indicator tube (VFD901) (for TYPE I light up) 67 SEG.II O Recording equalizer type II select signal output or segment drive signal output to the fluorescent indicator tube (VFD901) (for TYPE II light up) 30 XIN I Main system clock input terminal (4 MHz) 31 XOUT O Main system clock output terminal (4 MHz) 32 VSS — Ground terminal 68 G5-DISPLAY O 33 VER.200/190 I Setting terminal for the version (fixed at “L”) 69 G4-SEC O 34 POWER.OUT O Power on/off control signal output terminal “L”: power on Not used (open) 70 G3-MIN O MONITOR.TAPE/ SOURCE 71 G2-RCH O 35 O Audio monitor selection signal output terminal “H”: tape monitor, “L”: source monitor 72 G1-LCH O 37 OSC H/L O Calibration tone frequency high/low control signal output terminal “L”: frequency low 73 VCC — 38 CAL.ON/OFF O Calibration tone on/off control signal output terminal “H”: on, “L”: off 74 VEE — Power supply terminal (–24V) 75 AVSS — Ground terminal (for A/D converter) 76 VREF I Reference voltage (+5V) input terminal 77 KEY2 I Key input terminal (A/D input) (S906 to S909) ·, P PAUSE, MEMORY, RESET keys input 78 KEY1 I Key input terminal (A/D input) (S901 to S905) p, AMS 0, AMS ), r REC, R REC MUTING keys input 79 TIMER.SW I Half detect switch (S86) input terminal 80 DOLBY.SW I DOLBY NR switch (S913) input terminal (A/D input) 39 REC.M.ON/OFF O Record muting on/off control signal output to the CXA1598S (IC303) “L”: record muting on 40 BIAS.ON/OFF O Recording bias on/off control signal output terminal “H”: bias on 41 DOL.CON O Dolby B/C type or dolby on/off selection signal output to the CXA1563S (IC302, 307) “H”: dolby C type, “L”: dolby off (center voltage: dolby B type) O Metal on/off control signal output or segment drive signal output to the fluorescent indicator tube (VFD901) (for TYPE IV light up) 42 SEG.IV – 33 – Grid drive signal output to the fluorescent indicator tube (VFD901) Power supply terminal (+5V) – 34 – SECTION 6 EXPLODED VIEWS NOTE: • -XX and -X mean standardized parts, so they may have some difference from the original one. • Color Indication of Appearance Parts Example: KNOB, BALANCE (WHITE) . . . (RED) ↑ ↑ Parts Color Cabinet's Color • Abbreviation AUS : Australian MY : Malaysia SP : Singapore • Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. • The mechanical parts with no reference number in the exploded views are not supplied. • Hardware (# mark) list and accessories and packing materials are given in the last of the electrical parts list. The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. (1) CASE, CHASSIS SECTION rA: TRANSFORMER BOARD (AEP, AUS) rB: TRANS 1 BOARD (MY, SP) rC: TRANS 2 BOARD (MY, SP) 2 2 4 #1 3 5 (including rA) 2 7 MY, SP rB AEP, AUS rC 13 rA A AEP, MY, SP 7 6 not supplied T701 13 2 T701 12 AUS 11 not supplied MY, SP 13 not supplied 8 not supplied #1 #1 FRONT PANEL SECTION #2 1 #1 A 1 9 10 Remark Ref. No. #2 Part No. Description 8 8 8 9 10 3-020-984-01 3-020-984-22 3-020-984-31 3-703-353-02 3-703-249-21 PANEL, BACK (AEP) PANEL, BACK (AUS) PANEL, BACK (MY,SP) SUPPORT, PC BOARD SCREW, S TIGHT, +PTTWH (M3X8) ! 11 12 13 ! T701 ! T701 1-692-155-11 4-956-370-12 3-704-515-21 1-431-668-11 1-431-737-11 SELECTOR, POWER VOLTAGE (MY,SP) BAND, PLUG FIXED (AUS) SCREW (BV/RING) TRANSFORMER, POWER (AEP) TRANSFORMER, POWER (AUS) ! T701 1-431-738-11 TRANSFORMER, POWER (MY,SP) Ref. No. Part No. Description 1 2 2 * 3 * 3 X-4949-523-1 3-710-901-11 3-710-901-01 3-021-377-01 3-021-377-21 FOOT ASSY (F50180S) SCREW, TAPPING (BLACK) SCREW, TAPPING (SILVER) CASE (BLACK) CASE (SILVER) * * * * * 4 * 5 * 5 6 !7 A-2007-481-A A-2007-776-A A-2007-778-A 4-966-267-11 1-575-651-21 DOLBY-S BOARD, COMPLETE MAIN BOARD, COMPLETE (AEP,AUS) MAIN BOARD, COMPLETE (MY,SP) BUSHING (FBS001), CORD CORD, POWER (AEP,MY,SP) !7 1-696-845-11 CORD, POWER (AUS) – 35 – Remark (2) FRONT PANEL SECTION rD: AC POWER BOARD rE: HP BOARD rF: REC VOL BOARD 59 58 MD ASS’Y SECTION rD 60 (including rB – rF) 57 58 #4 58 58 rE 56 not supplied 58 55 62 61 63 #3 rF 64 54 65 68 53 52 67 51 Ref. No. 58 Ref. No. Part No. Description KNOB (REC)(BLACK) KNOB (REC)(SILVER) KNOB (BALANCE)(BLACK) KNOB (BALANCE)(SILVER) LID ASSY, CASSETTE (BLACK) * 60 61 61 62 62 A-2007-777-A 3-020-975-01 3-020-975-11 3-020-977-01 3-020-977-11 PANEL BOARD, COMPLETE (MY,SP) BUTTON (CONTROL)(BLACK) BUTTON (CONTROL)(SILVER) BUTTON (AUTO CAL)(BLACK) BUTTON (AUTO CAL)(SILVER) X-3375-905-1 4-942-568-41 3-020-971-11 3-020-971-31 3-020-971-41 LID ASSY, CASSETTE (SILVER) EMBLEM (NO.5), SONY PANEL, FRONT (BLACK)(AEP) PANEL, FRONT (MY,SP,AUS) PANEL, FRONT (SILVER)(AEP) 63 63 64 64 65 3-933-299-01 3-933-299-11 X-3375-507-1 X-3375-906-1 3-933-296-01 KNOB (DIA. 12)(BLACK) KNOB (DIA. 12)(SILVER) BASE (KB920S) ASSY, PANEL(BLACK) BASE (KB920S) ASSY, PANEL(SILVER) BUTTON (MONITOR)(BLACK) 3-020-980-01 4-922-921-62 4-922-921-91 4-951-620-01 1-777-109-11 WINDOW (METER) BUTTON (POWER)(BLACK) BUTOON (POWER)(SILVER) SCREW (2.6X8), +BVTP WIRE (FLAT TYPE) (39 CORE) 65 66 67 67 68 3-933-296-11 3-937-169-01 3-020-976-01 3-020-976-11 3-354-981-11 BUTOON (MONITOR)(SILVER) SPRING, TENSION BUTTON (EJECT)(BLACK) BUTTON (EJECT)(SILVER) SPRING (SUS), RING Part No. Description 51 51 52 52 53 3-020-978-01 3-020-978-11 3-020-979-01 3-020-979-11 X-3374-954-1 53 54 55 55 55 56 57 57 58 59 * 60 66 Remark A-2007-775-A PANEL BOARD, COMPLETE (AEP,AUS) – 36 – Remark (3) MD ASS’Y SECTION 103 TCM-190VB14 104 102 #5 105 107 106 108 109 101 Ref. No. 101 102 103 104 105 Part No. Description X-3368-119-1 3-354-963-01 1-769-915-11 1-765-314-11 3-354-957-01 HOLDER (R) ASSY, CASSETTE DAMPER WIRE (FLAT TYPE)(9 CORE) WIRE (FLAT TYPE)(7 CORE) JOINT (LOCK LEVER) Remark Ref. No. Part No. Description * 106 107 108 109 3-354-954-01 3-354-962-01 3-354-956-01 3-354-960-01 LEVER (LOCK LEVER R) SPRING (EJ SAFTY SPRING R) LEVER (EJ SAFTY LEVER R) SPRING (LOADING R), TORSION – 37 – Remark (4) MECHANISM DECK SECTION-1 (TCM-190VB14) 159 160 158 M902 158 not supplied 158 not supplied 157 not supplied #7 M901 #8 163 162 161 156 165 164 166 167 154 155 HE301 152 167 153 168 #6 169 153 151 #6 HRP301 170 not supplied not supplied Ref. No. Part No. Description 151 152 153 * 154 155 3-911-014-01 3-701-437-01 3-356-659-11 X-3374-992-1 3-363-868-01 SPRING, TORSION WASHER SPRING (RPH), COMPRESSION SLIDER (LIMITTER) ASSY SPRING (HEAD CHASSIS), TENSION 156 157 158 159 * 160 X-3368-368-1 3-937-332-01 3-359-414-01 1-638-983-11 1-634-840-21 FLYWHEEL (FWD) COMPLETE ASSY BELT (CAPSTAN) SCREW (+PTPWH 2X23) MOTOR FLEXIBLE BOARD AUDIO BOARD 161 * 162 3-359-466-01 BELT (FR), SQUARE 1-634-841-14 LEAF SW BOARD Remark Ref. No. 163 164 165 166 167 168 169 * 170 HE301 HRP301 M901 M902 – 38 – Part No. Description 3-359-430-01 3-359-424-01 3-575-321-00 X-3366-971-1 3-362-308-01 SPRING(CASSETTE RETAINER),LEAF GEAR (REV GEAR) RETAINER, THRUST, CAPSTAN TABLE ASSY (B), REEL CAP (REEL) 3-356-713-01 X-3366-047-1 X-3369-024-1 1-543-673-11 1-543-733-11 WASHER LEVER (PINCH F) ASSY SLIDER (HEAD CHASSIS) ASSY HEAD, MAGNETIC (ERASE) HEAD,MAGNETIC (RECORD/PLAYBACK) X-3363-501-2 MOTOR ASSY (REEL) X-3374-302-1 MOTOR ASSY (CAPSTAN) Remark (5) MECHANISM DECK SECTION-2 (TCM-190VB14) 209 208 206 204 207 205 210 202 203 211 212 213 201 Ref. No. Part No. Description 201 202 203 204 205 3-359-469-01 X-3368-719-2 3-359-415-11 3-359-454-01 3-359-429-11 SPACER CHASSIS(ONE)ASSY, MECHANICAL SLIDER (TRIGGER SLIDER) SPRING, TORSION SLIDER (BRAKE PLATE) 206 207 3-359-456-01 SPRING(TRIGGER SPRING),TORSION X-3366-569-1 ARM ASSY, FR Remark Ref. No. Part No. Description 208 209 210 211 212 3-359-419-11 3-359-421-01 3-359-418-01 3-924-185-11 3-936-483-01 GEAR (FR GEAR) CLUTCH (REEL DISK) PULLEY (FR PULLEY) SPRING (FR ARM), TORSION GEAR (CAM GEAR) 213 3-359-448-01 GEAR (TRIGGER) – 39 – Remark AC POWER SW AUDIO SECTION 7 ELECTRICAL PARTS LIST DOLBY-S NOTE: • Due to standardization, replacements in the parts list may be different from the parts specified in the diagrams or the components used on the set. • -XX and -X mean standardized parts, so they may have some difference from the original one. • RESISTORS All resistors are in ohms. METAL: Metal-film resistor. METAL OXIDE: Metal oxide-film resistor. F: nonflammable • Abbreviation AUS : Australian MY : Malaysia SP : Singapore Ref. No. Part No. • Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. • SEMICONDUCTORS In each case, u: µ, for example: uA. . : µA. . uPA. . : µPA. . uPB. . : µPB. . uPC. . : µPC. . uPD. . : µPD. . • CAPACITORS uF: µF • COILS uH: µH Description Remark AC POWER SW BOARD ******************* (Included in PANEL BOARD, COMPLETE) < CAPACITOR > ! C717 1-117-703-11 CERAMIC 0.0047uF 99% When indicating parts by reference number, please include the board. Part No. Description Remark C6 C7 C8 C9 C10 1-136-165-00 1-137-372-11 1-164-222-11 1-126-301-11 1-137-442-11 FILM FILM CERAMIC CHIP ELECT FILM 0.1uF 0.022uF 0.22uF 1uF 0.039uF 20% 5% 50V 50V 25V 50V 50V C11 C12 C13 C14 C15 1-163-007-11 1-164-717-11 1-163-038-00 1-124-465-00 1-164-222-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP 680PF 10% 0.0082uF 5% 0.1uF 0.47uF 20% 0.22uF 50V 50V 25V 50V 25V C16 C17 C18 C19 C20 1-163-038-00 1-124-465-00 1-163-038-00 1-164-222-11 1-163-035-00 CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 0.47uF 0.1uF 0.22uF 0.047uF 25V 50V 25V 25V 50V C21 C22 C23 C24 C25 1-164-717-11 1-164-161-11 1-163-005-11 1-137-442-11 1-136-165-00 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP FILM FILM 0.0082uF 0.0022uF 470PF 0.039uF 0.1uF 5% 10% 10% 5% 5% 50V 100V 50V 50V 50V C26 C28 1-137-372-11 FILM 1-163-038-00 CERAMIC CHIP 0.022uF 0.1uF 5% 50V 25V 0.5% 2% 2% 2% 0.5% 1/10W 1/10W 1/10W 1/10W 1/10W 5% 5% 250V < CONNECTOR > CN704 Ref. No. The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. 1-568-226-11 PIN, CONNECTOR 2P < SWITCH > ! S701 1-762-581-11 SWITCH, AC POWER PUSH (1 KEY) (I/O) ************************************************************ 1-634-840-21 AUDIO BOARD ************ * < CAPACITOR > C71 C72 1-124-903-11 ELECT 1-124-903-11 ELECT 1uF 1uF 20% 20% 50V 50V < CONNECTOR > * CNP71 CNP72 * CNP73 1-564-705-11 PIN, CONNECTOR (SMALL TYPE) 3P 1-764-902-11 CONNECTOR, FFC/FPC 4P 1-568-826-11 SOCKET, CONNECTOR 7P 20% < CONNECTOR > CN1 1-695-092-11 SOCKET, CONNECTOR 7P < RESISTOR > < IC > ! R71 1-249-406-11 CARBON 120 5% 1/4W F IC1 8-752-076-30 IC CXA1917AM-T6 < VARIABLE RESISTOR > < SHORT CHIP > RV71 1-241-761-11 RES, ADJ, CARBON 1K ************************************************************ A-2007-481-A DOLBY-S BOARD, COMPLETE *********************** * J1 J2 J3 1-216-296-00 SHORT (CHIP) 0 1-216-296-00 SHORT (CHIP) 0 1-216-296-00 SHORT (CHIP) 0 < RESISTOR > < CAPACITOR > C1 C2 C3 C4 C5 1-136-165-00 1-163-012-00 1-163-012-00 1-164-222-11 1-136-165-00 FILM CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP FILM 0.1uF 0.0018uF 0.0018uF 0.22uF 0.1uF 5% 10% 10% 5% 50V 50V 50V 25V 50V R1 R2 R3 R4 R5 – 40 – 1-216-685-11 1-208-811-11 1-208-791-11 1-208-799-11 1-216-689-11 METAL CHIP RES,CHIP RES,CHIP RES,CHIP METAL CHIP 27K 16K 2.4K 5.1K 39K DOLBY-S Ref. No. Part No. Description R6 R7 R8 R9 R10 1-216-689-11 1-216-615-11 1-208-462-41 1-208-812-11 1-216-615-11 METAL CHIP METAL CHIP RES,CHIP RES,CHIP METAL CHIP 39K 33 10K 18K 33 0.5% 0.5% 2% 2% 0.5% Remark 1/10W 1/10W 1/10W 1/10W 1/10W R11 R12 R13 R14 R15 1-216-619-11 1-216-684-11 1-216-615-11 1-216-619-11 1-216-655-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 47 24K 33 47 1.5K 0.5% 0.5% 0.5% 0.5% 0.5% 1/10W 1/10W 1/10W 1/10W 1/10W R16 1-216-678-11 METAL CHIP 13K 0.5% 1/10W R17 1-216-673-11 METAL CHIP 8.2K 0.5% 1/10W R18 1-208-462-41 RES,CHIP 10K 2% 1/10W R19 1-208-462-41 RES,CHIP 10K 2% 1/10W R20 1-216-689-11 METAL CHIP 39K 0.5% 1/10W ************************************************************ HP BOARD ********* (Included in PANEL BOARD, COMPLETE) < CAPACITOR > C317 1-161-494-00 CERAMIC 0.022uF 25V < JACK > J302 1-568-519-41 JACK, LARGE TYPE (PHONES) ************************************************************ 1-634-841-14 LEAF SW BOARD ************** * < CONNECTOR > * CNP81 1-568-852-11 SOCKET, CONNECTOR 9P < IC > IC81 IC82 8-749-924-10 IC PHOTO REFLECTOR NJL5165K-B(H1) 8-749-924-10 IC PHOTO REFLECTOR NJL5165K-B(H1) Ref. No. Part No. HP LEAF SW Description MAIN Remark < CAPACITOR > C101 C102 C103 C104 C105 1-126-963-11 1-106-353-00 1-136-173-00 1-126-964-11 1-136-165-00 ELECT MYLAR FILM ELECT FILM 4.7uF 0.0027uF 0.47uF 10uF 0.1uF 20% 5% 5% 20% 5% 50V 50V 50V 50V 50V C106 C107 C110 C111 C112 1-136-163-00 1-126-964-11 1-126-959-11 1-126-964-11 1-126-963-11 FILM ELECT ELECT ELECT ELECT 0.068uF 10uF 0.47uF 10uF 4.7uF 5% 20% 20% 20% 20% 50V 50V 50V 50V 50V C113 C114 C115 C116 C117 1-137-428-11 1-136-935-11 1-137-429-11 1-130-474-00 1-130-487-00 FILM FILM FILM MYLAR MYLAR 180PF 22PF 270PF 0.0018uF 0.022uF 5% 5% 5% 5% 5% 50V 630V 50V 50V 50V C118 C119 C120 C121 C122 1-107-714-11 1-102-518-11 1-130-488-00 1-126-961-11 1-130-483-00 ELECT CERAMIC MYLAR ELECT MYLAR 10uF 33PF 0.027uF 2.2uF 0.01uF 20% 5% 5% 20% 5% 16V 50V 50V 50V 50V C123 C124 C125 C126 C127 1-130-487-00 1-130-491-00 1-136-803-11 1-130-468-00 1-136-433-11 MYLAR MYLAR FILM MYLAR FILM 0.022uF 0.047uF 560PF 560PF 100PF 5% 5% 5% 5% 5% 50V 50V 630V 50V 630V C128 C130 C131 C132 C133 1-130-474-00 1-106-351-00 1-126-964-11 1-136-165-00 1-136-163-00 MYLAR MYLAR ELECT FILM FILM 0.0018uF 2200PF 10uF 0.1uF 0.068uF 5% 5% 20% 5% 5% 50V 200V 50V 50V 50V C136 C150 C201 C202 C203 1-126-964-11 1-162-302-11 1-126-963-11 1-106-353-00 1-136-173-00 ELECT CERAMIC ELECT MYLAR FILM 10uF 0.0022uF 4.7uF 0.0027uF 0.47uF 20% 20% 20% 5% 5% 50V 16V 50V 50V 50V C204 C205 C206 C207 C210 1-126-964-11 1-136-165-00 1-136-163-00 1-126-964-11 1-126-959-11 ELECT FILM FILM ELECT ELECT 10uF 0.1uF 0.068uF 10uF 0.47uF 20% 5% 5% 20% 20% 50V 50V 50V 50V 50V C211 C212 C213 C214 C215 1-126-964-11 1-126-963-11 1-137-428-11 1-136-935-11 1-137-429-11 ELECT ELECT FILM FILM FILM 10uF 4.7uF 180PF 22PF 270PF 20% 20% 5% 5% 5% 50V 50V 50V 630V 50V C216 C217 C218 C219 C220 1-130-474-00 1-130-487-00 1-107-714-11 1-102-518-11 1-130-488-00 MYLAR MYLAR ELECT CERAMIC MYLAR 0.0018uF 0.022uF 10uF 33PF 0.027uF 5% 5% 20% 5% 5% 50V 50V 16V 50V 50V C221 C222 C223 C224 C225 1-126-961-11 1-130-483-00 1-130-487-00 1-130-491-00 1-136-803-11 ELECT MYLAR MYLAR MYLAR FILM 2.2uF 0.01uF 0.022uF 0.047uF 560PF 20% 5% 5% 5% 5% 50V 50V 50V 50V 630V < RESISTOR > R81 R83 R84 R85 R86 1-249-414-11 1-247-834-11 1-249-417-11 1-249-408-11 1-249-408-11 CARBON CARBON CARBON CARBON CARBON 560 1.3K 1K 180 180 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W < SWITCH > S81 1-571-958-11 SWITCH, PUSH (1 KEY) (MECHANISM STOP) S82 1-571-281-21 SWITCH, LEAF (70u) S83 1-571-281-21 SWITCH, LEAF (METAL) S84 1-571-281-21 SWITCH, LEAF (REC) S86 1-571-281-21 SWITCH, LEAF (HALF) ************************************************************ * * A-2007-776-A MAIN BOARD, COMPLETE (AEP, AUS) ********************* (Including TRANSFORMER BOARD) A-2007-778-A MAIN BOARD, COMPLETE (MY, SP) ********************* 7-685-871-01 SCREW +BVTT 3X6 (S) – 41 – MAIN Ref. No. Part No. Description C226 C227 C228 C230 C231 1-130-468-00 1-136-433-11 1-130-474-00 1-106-351-00 1-126-964-11 MYLAR FILM MYLAR MYLAR ELECT 560PF 100PF 0.0018uF 2200PF 10uF 5% 5% 5% 5% 20% Remark 50V 630V 50V 200V 50V C232 C233 C236 C250 C301 1-136-165-00 1-136-163-00 1-126-964-11 1-162-302-11 1-126-964-11 FILM FILM ELECT CERAMIC ELECT 0.1uF 0.068uF 10uF 0.0022uF 10uF 5% 5% 20% 20% 20% 50V 50V 50V 16V 50V C302 C303 C304 C305 C306 1-126-964-11 1-130-478-00 1-126-959-11 1-130-494-11 1-126-960-11 ELECT MYLAR ELECT MYLAR ELECT 10uF 0.0039uF 0.47uF 0.082uF 1uF 20% 5% 20% 5% 20% 50V 50V 50V 50V 50V C307 C308 C309 C310 C311 1-104-665-11 1-104-665-11 1-162-282-31 1-161-494-00 1-126-961-11 ELECT ELECT CERAMIC CERAMIC ELECT 100uF 100uF 100PF 0.022uF 2.2uF 20% 20% 10% 20% 10V 10V 50V 25V 50V C312 C313 C319 C320 C321 1-162-217-31 1-126-961-11 1-126-964-11 1-126-947-11 1-126-947-11 CERAMIC ELECT ELECT ELECT ELECT 56PF 2.2uF 10uF 47uF 47uF 5% 20% 20% 20% 20% 50V 50V 50V 35V 35V C322 C323 C324 C325 C326 1-137-613-11 1-137-613-11 1-106-359-00 1-126-965-11 1-136-558-11 MYLAR MYLAR MYLAR ELECT FILM 0.0018uF 0.0018uF 4700PF 22uF 0.0039uF 5% 5% 5% 20% 5% 100V 100V 200V 50V 630V C327 C330 C331 C332 C333 1-107-584-11 1-126-964-11 1-126-964-11 1-126-961-11 1-126-964-11 CERAMIC ELECT ELECT ELECT ELECT 4PF 10uF 10uF 2.2uF 10uF 0.25PF 20% 20% 20% 20% 500V 50V 50V 50V 50V C334 C701 C702 C703 C704 1-126-964-11 1-126-768-11 1-126-936-11 1-126-916-11 1-126-947-11 ELECT ELECT ELECT ELECT ELECT 10uF 2200uF 3300uF 1000uF 47uF 20% 20% 20% 20% 20% 50V 16V 16V 6.3V 35V C705 C706 C707 C708 C709 1-126-942-61 1-126-942-61 1-128-548-11 1-126-964-11 1-126-768-11 ELECT ELECT ELECT ELECT ELECT 1000uF 1000uF 4700uF 10uF 2200uF 20% 20% 20% 20% 20% 25V 25V 25V 50V 16V C710 C711 C712 C713 C714 1-126-964-11 1-126-937-11 1-126-964-11 1-126-927-11 1-126-968-11 ELECT ELECT ELECT ELECT ELECT 10uF 4700uF 10uF 2200uF 100uF 20% 20% 20% 20% 20% 50V 16V 50V 10V 50V C715 C716 C805 C806 C809 1-164-159-11 1-126-947-11 1-164-159-11 1-164-159-11 1-126-959-11 CERAMIC ELECT CERAMIC CERAMIC ELECT 0.1uF 47uF 0.1uF 0.1uF 0.47uF C811 C813 C830 1-164-159-11 CERAMIC 1-126-959-11 ELECT 1-164-159-11 CERAMIC 0.1uF 0.47uF 0.1uF 20% 20% 20% 50V 35V 50V 50V 50V 50V 50V 50V Ref. No. C831 Part No. Description 1-104-665-11 ELECT Remark 100uF 20% < CONNECTOR > CN101 CN102 CN201 CN202 * CN801 1-695-087-11 1-695-087-11 1-695-087-11 1-695-087-11 1-568-954-11 PIN, CONNECTOR (PC BOARD) 7P PIN, CONNECTOR (PC BOARD) 7P PIN, CONNECTOR (PC BOARD) 7P PIN, CONNECTOR (PC BOARD) 7P PIN, CONNECTOR 5P * CN803 * CN804 CN805 CNP301 * CNP302 1-568-828-11 1-568-826-11 1-778-065-11 1-506-468-11 1-560-062-00 SOCKET, CONNECTOR 9P SOCKET, CONNECTOR 7P SOCKET, CONNECTOR 39P PIN, CONNECTOR 3P PIN, CONNECTOR 4P * CNP303 1-560-060-00 * CNP304 1-560-062-00 CNP305 1-691-463-11 CNP306 1-764-328-11 PIN, CONNECTOR 2P PIN, CONNECTOR 4P PIN, CONNECTOR (PC BOARD) 7P PIN, CONNECTOR (PCB)(V TYPE)5P < DIODE > D101 D102 D103 D201 D202 8-719-911-19 8-719-911-19 8-719-933-33 8-719-911-19 8-719-911-19 DIODE DIODE DIODE DIODE DIODE 1SS119 1SS119 HZS6A1L 1SS119 1SS119 D203 D301 D302 D305 D306 8-719-933-33 8-719-911-19 8-719-911-19 8-719-911-19 8-719-911-19 DIODE DIODE DIODE DIODE DIODE HZS6A1L 1SS119 1SS119 1SS119 1SS119 D307 D308 D309 D310 D311 8-719-911-19 8-719-911-19 8-719-911-19 8-719-911-19 8-719-911-19 DIODE DIODE DIODE DIODE DIODE 1SS119 1SS119 1SS119 1SS119 1SS119 D312 D313 D341 D342 D701 8-719-911-19 8-719-911-19 8-719-911-19 8-719-911-19 8-719-024-99 DIODE DIODE DIODE DIODE DIODE 1SS119 1SS119 1SS119 1SS119 11ES2-NTA2B D702 D703 D704 D705 D706 8-719-024-99 8-719-024-99 8-719-024-99 8-719-911-19 8-719-933-33 DIODE DIODE DIODE DIODE DIODE 11ES2-NTA2B 11ES2-NTA2B 11ES2-NTA2B 1SS119 HZS6A1L D707 D708 D709 D710 D711 8-719-933-33 8-719-933-33 8-719-025-03 8-719-986-27 8-719-911-19 DIODE DIODE DIODE DIODE DIODE HZS6A1L HZS6A1L RBA-402-SL HZS12B1LTA 1SS119 D712 D713 D714 D715 D716 8-719-200-31 8-719-985-95 8-719-911-19 8-719-911-19 8-719-986-00 DIODE DIODE DIODE DIODE DIODE 21DQ05 HZS7A2LTA 1SS119 1SS119 HZS7C1LTA D717 D802 D803 D804 8-719-024-99 8-719-911-19 8-719-911-19 8-719-911-19 DIODE DIODE DIODE DIODE 11ES2-NTA2B 1SS119 1SS119 1SS119 – 42 – 10V MAIN Ref. No. Part No. Description Remark D814 8-719-911-19 DIODE 1SS119 D815 8-719-911-19 DIODE 1SS119 < IC > IC301 IC302 IC303 IC304 IC305 8-759-111-44 8-752-066-35 8-752-070-69 8-759-106-56 8-759-634-51 IC IC IC IC IC uPC4570C-1 CXA1563S CXA1598S uPC1297CA M5218AP IC306 IC307 IC308 IC309 IC310 8-759-634-51 8-752-066-35 8-759-634-50 8-759-634-50 8-759-140-53 IC IC IC IC IC M5218AP CXA1563S M5218AL M5218AL uPD4053BC IC311 IC701 IC801 IC803 IC804 8-759-634-51 8-759-634-51 8-759-422-06 8-759-973-95 8-759-165-82 IC IC IC IC IC M5218AP M5218AP M38172M4-171FP BA6219B PST600E-T < JACK > J301 Part No. Description 1-410-780-11 1-410-778-11 1-410-780-11 1-410-778-11 INDUCTOR INDUCTOR INDUCTOR INDUCTOR 27mH 18mH 27mH 18mH < FILTER > LPF101 1-234-037-11 FILTER, LOW PASS LPF201 1-234-037-11 FILTER, LOW PASS < TRANSISTOR > Q101 Q102 Q103 Q105 Q201 8-729-900-74 8-729-900-80 8-729-922-37 8-729-900-80 8-729-900-74 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR DTC143TS DTC114ES 2SD2144S DTC114ES DTC143TS Q202 Q203 Q205 Q301 Q302 8-729-900-80 8-729-922-37 8-729-900-80 8-729-119-76 8-729-900-89 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR DTC114ES 2SD2144S DTC114ES 2SA1175-HFE DTC144ES Q303 Q304 Q305 Q306 Q307 8-729-900-80 8-729-900-80 8-729-119-76 8-729-900-89 8-729-900-80 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR DTC114ES DTC114ES 2SA1175-HFE DTC144ES DTC114ES Q308 Q309 Q310 Q311 Q312 8-729-900-80 8-729-900-80 8-729-194-57 8-729-194-57 8-729-922-37 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR DTC114ES DTC114ES 2SC945-P 2SC945-P 2SD2144S Q313 Q314 Q315 8-729-119-78 TRANSISTOR 2SC403SP-51 8-729-119-78 TRANSISTOR 2SC403SP-51 8-729-900-80 TRANSISTOR DTC114ES Remark Q316 Q351 8-729-900-74 TRANSISTOR DTC143TS 8-729-119-76 TRANSISTOR 2SA1175-HFE Q352 Q353 Q701 Q702 Q703 8-729-900-65 8-729-900-80 8-729-141-83 8-729-209-15 8-729-141-83 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR DTA144ES DTC114ES 2SB1094-LK 2SD2012 2SB1094-LK Q704 Q705 Q706 Q707 Q708 8-729-119-78 8-729-209-15 8-729-119-78 8-729-119-76 8-729-140-04 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SC403SP-51 2SD2012 2SC403SP-51 2SA1175-HFE 2SB1116A-L Q802 Q803 Q804 Q806 Q807 8-729-900-89 8-729-900-65 8-729-900-65 8-729-900-80 8-729-900-80 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR DTC144ES DTA144ES DTA144ES DTC114ES DTC114ES Q808 Q809 Q810 Q814 8-729-900-80 8-729-900-80 8-729-801-84 8-729-900-89 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR DTC114ES DTC114ES 2SB1013-4 DTC144ES 1-784-430-11 JACK, PIN 4P (LINE IN, OUT) < COIL > L101 L121 L201 L221 Ref. No. < RESISTOR > R101 R102 R103 R104 R105 1-249-433-11 1-249-417-11 1-247-843-11 1-249-428-11 1-249-441-11 CARBON CARBON CARBON CARBON CARBON 22K 1K 3.3K 8.2K 100K 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W R107 R108 R109 R110 R112 1-249-421-11 1-247-860-11 1-249-421-11 1-249-417-11 1-247-843-11 CARBON CARBON CARBON CARBON CARBON 2.2K 16K 2.2K 1K 3.3K 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W R113 R114 R116 R117 R118 1-249-437-11 1-249-429-11 1-249-425-11 1-249-441-11 1-249-403-11 CARBON CARBON CARBON CARBON CARBON 47K 10K 4.7K 100K 68 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W R119 R120 R121 R122 R123 1-247-882-11 1-249-426-11 1-249-429-11 1-249-420-11 1-247-838-00 CARBON CARBON CARBON CARBON CARBON 130K 5.6K 10K 1.8K 2K 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W R124 R125 R126 R127 ! R128 1-249-441-11 1-249-421-11 1-249-425-11 1-249-435-11 1-219-153-11 CARBON CARBON CARBON CARBON FUSIBLE 100K 2.2K 4.7K 33K 10 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W F R129 R130 R131 R133 R137 1-247-883-00 1-249-434-11 1-247-874-11 1-249-410-11 1-249-441-11 CARBON CARBON CARBON CARBON CARBON 150K 27K 62K 270 100K 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W R138 R139 R140 R141 R142 1-249-441-11 1-247-864-11 1-249-429-11 1-249-419-11 1-249-426-11 CARBON CARBON CARBON CARBON CARBON 100K 24K 10K 1.5K 5.6K 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W – 43 – The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. MAIN Ref. No. Part No. Description Remark R143 R144 R145 R152 R201 1-247-843-11 1-249-409-11 1-249-426-11 1-247-887-00 1-249-433-11 CARBON CARBON CARBON CARBON CARBON 3.3K 220 5.6K 220K 22K 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W R202 R203 R204 R205 R207 1-249-417-11 1-247-843-11 1-249-428-11 1-249-441-11 1-249-421-11 CARBON CARBON CARBON CARBON CARBON 1K 3.3K 8.2K 100K 2.2K 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W R208 R209 R210 R212 R213 1-247-860-11 1-249-421-11 1-249-417-11 1-247-843-11 1-249-437-11 CARBON CARBON CARBON CARBON CARBON 16K 2.2K 1K 3.3K 47K 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W R214 R216 R217 R218 R219 1-249-429-11 1-249-425-11 1-249-441-11 1-249-403-11 1-247-882-11 CARBON CARBON CARBON CARBON CARBON 10K 4.7K 100K 68 130K 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W R220 R221 R222 R223 R224 1-249-426-11 1-249-429-11 1-249-420-11 1-247-838-00 1-249-441-11 CARBON CARBON CARBON CARBON CARBON 5.6K 10K 1.8K 2K 100K 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W R225 R226 R227 ! R228 R229 1-249-421-11 1-249-425-11 1-249-435-11 1-219-153-11 1-247-883-00 CARBON CARBON CARBON FUSIBLE CARBON 2.2K 4.7K 33K 10 150K 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W F 1/4W R230 R231 R233 R237 R238 1-249-434-11 1-247-874-11 1-249-410-11 1-249-441-11 1-249-441-11 CARBON CARBON CARBON CARBON CARBON 27K 62K 270 100K 100K 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W R239 R240 R241 R242 R243 1-247-864-11 1-249-429-11 1-249-419-11 1-249-426-11 1-247-843-11 CARBON CARBON CARBON CARBON CARBON 24K 10K 1.5K 5.6K 3.3K 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W R244 R245 R252 R302 R303 1-249-409-11 1-249-426-11 1-247-887-00 1-247-848-11 1-249-421-11 CARBON CARBON CARBON CARBON CARBON 220 5.6K 220K 5.1K 2.2K 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W R304 ! R305 R306 R307 R308 1-249-421-11 1-215-452-00 1-249-436-11 1-249-433-11 1-249-437-11 CARBON METAL CARBON CARBON CARBON 2.2K 20K 39K 22K 47K 5% 1% 5% 5% 5% 1/4W 1/4W F 1/4W 1/4W 1/4W ! R309 R310 R311 R312 R313 1-215-455-00 1-249-441-11 1-249-441-11 1-249-433-11 1-249-434-11 METAL CARBON CARBON CARBON CARBON 27K 100K 100K 22K 27K 1% 5% 5% 5% 5% 1/4W F 1/4W 1/4W 1/4W 1/4W 51K 30K 5% 5% 1/4W 1/4W R314 R315 1-247-872-11 CARBON 1-247-866-11 CARBON Ref. No. Part No. Description Remark R316 R317 R318 1-247-872-11 CARBON 1-249-435-11 CARBON 1-247-864-11 CARBON 51K 33K 24K 5% 5% 5% 1/4W 1/4W 1/4W R319 R320 R321 R322 R323 1-249-436-11 1-249-435-11 1-247-856-00 1-249-432-11 1-247-864-11 CARBON CARBON CARBON CARBON CARBON 39K 33K 11K 18K 24K 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W R324 R325 R326 R327 R328 1-247-874-11 1-247-862-11 1-249-437-11 1-247-852-11 1-247-860-11 CARBON CARBON CARBON CARBON CARBON 62K 20K 47K 7.5K 16K 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W R329 R330 R331 R332 R333 1-247-862-11 1-247-836-11 1-249-425-11 1-249-422-11 1-249-417-11 CARBON CARBON CARBON CARBON CARBON 20K 1.6K 4.7K 2.7K 1K 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W R334 R335 R336 R337 R338 1-249-417-11 1-249-413-11 1-247-832-11 1-249-429-11 1-249-421-11 CARBON CARBON CARBON CARBON CARBON 1K 470 1.1K 10K 2.2K 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W R339 R340 R341 R342 R343 1-249-440-11 1-249-440-11 1-249-390-11 1-249-390-11 1-249-437-11 CARBON CARBON CARBON CARBON CARBON 82K 82K 5.6 5.6 47K 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W R344 R345 R346 R349 R350 1-249-429-11 1-249-433-11 1-249-437-11 1-249-427-11 1-249-441-11 CARBON CARBON CARBON CARBON CARBON 10K 22K 47K 6.8K 100K 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W R351 R352 R353 R354 R355 1-247-843-11 1-249-429-11 1-249-429-11 1-249-417-11 1-249-401-11 CARBON CARBON CARBON CARBON CARBON 3.3K 10K 10K 1K 47 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W R356 R357 R358 R359 R360 1-249-434-11 1-247-848-11 1-247-870-11 1-249-434-11 1-249-437-11 CARBON CARBON CARBON CARBON CARBON 27K 5.1K 43K 27K 47K 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W R361 ! R363 R365 R366 R367 1-249-429-11 1-215-452-00 1-249-433-11 1-247-862-11 1-249-429-11 CARBON METAL CARBON CARBON CARBON 10K 20K 22K 20K 10K 5% 1% 5% 5% 5% 1/4W 1/4W F 1/4W 1/4W 1/4W R368 R701 R702 R703 R704 1-249-429-11 1-249-417-11 1-249-409-11 1-247-812-11 1-249-420-11 CARBON CARBON CARBON CARBON CARBON 10K 1K 220 160 1.8K 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W ! R705 R706 R707 R708 R709 1-219-139-11 1-249-425-11 1-249-427-11 1-249-419-11 1-249-419-11 FUSIBLE CARBON CARBON CARBON CARBON 0.68 4.7K 6.8K 1.5K 1.5K 10% 5% 5% 5% 5% 1/4W F 1/4W 1/4W 1/4W 1/4W – 44 – The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. MAIN Ref. No. Part No. Description Remark R710 R711 R712 ! R713 R714 1-249-427-11 1-249-425-11 1-249-417-11 1-219-139-11 1-249-427-11 CARBON CARBON CARBON FUSIBLE CARBON 6.8K 4.7K 1K 0.68 6.8K 5% 5% 5% 10% 5% 1/4W 1/4W 1/4W 1/4W F 1/4W ! R715 R716 R717 ! R718 R719 1-219-135-11 1-249-425-11 1-249-417-11 1-219-137-11 1-249-425-11 FUSIBLE CARBON CARBON FUSIBLE CARBON 0.15 4.7K 1K 0.33 4.7K 10% 5% 5% 10% 5% 1/4W F 1/4W 1/4W 1/4W F 1/4W R720 R721 R722 R723 R724 1-247-830-11 1-249-437-11 1-249-437-11 1-247-843-11 1-249-429-11 CARBON CARBON CARBON CARBON CARBON 910 47K 47K 3.3K 10K 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W R802 R803 R804 R805 R807 1-249-433-11 1-249-441-11 1-249-417-11 1-249-425-11 1-249-422-11 CARBON CARBON CARBON CARBON CARBON 22K 100K 1K 4.7K 2.7K 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W R808 R810 R811 R812 R813 1-249-425-11 1-249-422-11 1-249-422-11 1-249-417-11 1-249-419-11 CARBON CARBON CARBON CARBON CARBON 4.7K 2.7K 2.7K 1K 1.5K 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W R814 R815 R816 ! R817 R824 1-249-421-11 1-247-828-11 1-249-413-11 1-212-954-11 1-249-430-11 CARBON CARBON CARBON FUSIBLE CARBON 2.2K 750 470 6.8 12K 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/2W F 1/4W R825 R826 R831 R832 R833 1-249-435-11 1-249-429-11 1-249-429-11 1-249-429-11 1-249-429-11 CARBON CARBON CARBON CARBON CARBON 33K 10K 10K 10K 10K 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W R834 R835 R845 1-249-434-11 CARBON 1-249-434-11 CARBON 1-249-429-11 CARBON 27K 27K 10K 5% 5% 5% 1/4W 1/4W 1/4W Ref. No. Part No. PANEL Description Remark < TEST PIN > TP301 TP301 * TP801 1-564-506-11 PLUG, CONNECTOR 3P (TEST TERMINAL) 1-764-326-11 PIN, CONNECTOR (PCB)(V TYPE)3P (TEST TERMINAL) 1-560-060-00 PIN, CONNECTOR 2P (TESY TERMINAL) < VIBRATOR > X801 1-577-358-21 VIBRATOR, CERAMIC (4MHz) ************************************************************ * A-2007-775-A PANEL BOARD, COMPLETE (AEP, AUS) ********************** (Including AC POWER BOARD, HP BOARD, and REC VOL BOARD) * A-2007-777-A PANEL BOARD, COMPLETE (MY, SP) ********************** (Including AC POWER BOARD, HP BOARD, REC VOL BOARD, TRANS1 BOARD, and TRANS 2 BOARD) * 3-386-245-11 HOLDER (FL) < CAPACITOR > C901 1-104-665-11 ELECT 100uF 20% 10V < CONNECTOR > CN901 < DIODE > D901 D902 D903 RB801 8-719-911-19 DIODE 1SS119 8-719-911-19 DIODE 1SS119 8-719-911-19 DIODE 1SS119 < IC > IC901 < CONPOSITION CIRCUIT BLOCK > 1-778-065-11 SOCKET, CONNECTOR 39P 8-749-014-66 IC NJL56H400 < TRANSISTOR > Q901 Q902 Q903 8-729-900-89 TRANSISTOR DTC144ES 8-729-900-89 TRANSISTOR DTC144ES 8-729-900-89 TRANSISTOR DTC144ES 1-233-199-11 COMPOSITION CIRCUIT BLOCK 10k < RESISTOR > < VARIABLE RESISTOR > R901 R905 R906 R907 R908 1-249-441-11 1-247-838-00 1-249-422-11 1-247-848-11 1-249-429-11 CARBON CARBON CARBON CARBON CARBON 100K 2K 2.7K 5.1K 10K 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W RES, ADJ, CARBON 47K RES, ADJ, CARBON 22K RES, ADJ, CARBON 4.7K RES, ADJ, CARBON 4.7K R909 R910 R911 R912 R923 1-247-866-11 1-247-838-00 1-249-422-11 1-247-848-11 1-247-807-31 CARBON CARBON CARBON CARBON CARBON 30K 2K 2.7K 5.1K 100 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W < TRANSFORMER > R924 1-247-807-31 CARBON 100 5% 1/4W RV101 RV102 RV103 RV121 RV201 1-241-765-11 1-238-019-11 1-241-765-11 1-241-763-11 1-241-765-11 RES, ADJ, CARBON 22K RES, ADJ, CARBON 47K RES, ADJ, CARBON 22K RES, ADJ, CARBON 4.7K RES, ADJ, CARBON 22K RV202 RV203 RV221 RV306 1-238-019-11 1-241-765-11 1-241-763-11 1-241-763-11 T101 T201 T301 1-433-344-11 TRANSFORMER, BIAS OSCILLATION 1-433-344-11 TRANSFORMER, BIAS OSCILLATION 1-423-614-11 TRANSFORMER, BIAS OSCILLATION < SWITCH > S901 – 45 – 1-572-184-11 SWITCH, KEYBOARD (p) The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. PANEL Ref. No. REC VOL TRANSFORMER Part No. Description S902 S903 S904 S905 1-572-184-11 1-572-184-11 1-572-184-11 1-572-184-11 SWITCH, KEYBOARD (AMS 0) SWITCH, KEYBOARD (AMS )) SWITCH, KEYBOARD (r, REC) SWITCH, KEYBOARD (R, REC MUTING) Remark S906 S907 S908 S909 1-572-184-11 1-572-184-11 1-572-184-11 1-572-184-11 SWITCH, KEYBOARD (·) SWITCH, KEYBOARD (P, PAUSE) SWITCH, KEYBOARD (MEMORY) SWITCH, KEYBOARD (RESET) TRANS 1 Ref. No. TRANS 2 Part No. Description Remark < LINE FILTER > ! LF701 1-424-485-11 FILTER, LINE ************************************************************ TRANS 1 BOARD (MY, SP) ************** (Included in PANEL BOARD, COMPLETE) < CONNECTOR > < FLUORESCENT INDICATOR TUBE > * CNP702 1-580-230-31 PIN, CONNECTOR (PC BOARD) 2P VFD901 1-517-163-11 INDICATOR TUBE, FLUORESCENT ************************************************************ REC VOL BOARD ************** (Included in PANEL BOARD, COMPLETE) < LINE FILTER > ! LF701 1-424-485-11 FILTER, LINE ************************************************************ TRANS 2 BOARD (MY, SP) ************** (Included in PANEL BOARD, COMPLETE) < RESISTOR > R153 R253 R362 R915 R916 1-249-425-11 1-249-425-11 1-249-429-11 1-249-429-11 1-247-866-11 CARBON CARBON CARBON CARBON CARBON 4.7K 4.7K 10K 10K 30K 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W R917 R918 R919 R920 R921 1-247-836-11 1-247-840-00 1-247-843-11 1-249-426-11 1-247-858-11 CARBON CARBON CARBON CARBON CARBON 1.6K 2.4K 3.3K 5.6K 13K 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W R922 1-247-868-11 CARBON 36K 5% 1/4W < CAPACITOR > C718 C719 1-136-165-00 FILM 1-136-165-00 FILM 0.1uF 0.1uF 5% 5% 50V 50V < CONNECTOR > CNP701 1-564-513-11 PLUG, CONNECTOR 10P CNP701 1-764-333-11 PIN, CONNECTOR(PCB)(V TYPE)10P ************************************************************ MISCELLANEOUS *************** < VARIABLE RESISTOR > RV301 RV302 RV303 RV304 1-225-220-11 1-241-897-11 1-241-896-11 1-225-568-11 RES, VAR, CARBON 50K/50K (REC LEVEL) RES, VAR, CARBON 50K/50K (BALANCE) RES, VAR, CARBON 10K (BIAS) RES, VAR, CARBON 5K/5K (CAL REC LEVEL) < SWITCH > S910 1-572-184-11 SWITCH, KEYBOARD (MONITOR) S911 1-572-184-11 SWITCH, KEYBOARD (AUTO CAL) S913 1-762-647-11 SWITCH, ROTARY (DOLBY NR) ************************************************************ TRANSFORMER BOARD (AEP, AUS) ******************** (Included in MAIN BOARD, COMPLETE) !7 !7 ! 11 59 103 104 159 HE301 HRP301 M901 1-575-651-21 1-696-845-11 1-692-155-11 1-777-109-11 1-769-915-11 CORD, POWER (AEP,MY,SP) CORD, POWER (AUS) SELECTOR, POWER VOLTAGE (MY,SP) WIRE (FLAT TYPE) (39 CORE) WIRE (FLAT TYPE) (9 CORE) 1-765-314-11 1-638-983-11 1-543-673-11 1-543-733-11 X-3363-501-2 WIRE (FLAT TYPE) (7 CORE) MOTOR FLEXIBLE BOARD HEAD, MAGNETIC (ERASE) HEAD,MAGNETIC (RECORD/PLAYBACK) MOTOR ASSY (REEL) M902 X-3374-302-1 MOTOR ASSY (CAPSTAN) ! T701 1-431-668-11 TRANSFORMER, POWER (AEP) ! T701 1-431-737-11 TRANSFORMER, POWER (AUS) ! T701 1-431-738-11 TRANSFORMER, POWER (MY,SP) ************************************************************ 3-923-762-11 HOLDER (TR) * ************** HARDWARE LIST ************** < CAPACITOR > C718 C719 1-136-165-00 FILM 1-136-165-00 FILM 0.1uF 0.1uF 5% 5% < CONNECTOR > CNP701 1-564-513-11 PLUG, CONNECTOR 10P CNP701 1-764-333-11 PIN, CONNECTOR(PCB)(V TYPE)10P * CNP702 1-580-230-31 PIN, CONNECTOR (PC BOARD) 2P 50V 50V #1 #2 #3 #4 #5 7-685-646-79 7-685-885-09 7-685-863-09 7-685-134-19 7-685-862-09 SCREW +BVTP 3X8 TYPE2 N-S SCREW +BVTT 4X16 (S) SCREW +BVTT 2.6X8 (S) SCREW +PTPWH 2.6X8 (TYPE2) SCREW +BVTT 2.6X6 (S) #6 7-621-772-10 SCREW +B 2X4 #7 7-621-775-00 SCREW +B 2.6X3 #8 7-627-556-08 SCREW +P 2.6X2.8 ************************************************************ – 46 – The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. Ref. No. Part No. Description Remark Ref. No. ACCESSORIES & PACKING MATERIALS ******************************** 1-776-263-11 CORD, CONNECTION (AUDIO) 1.5m 3-862-301-11 MANUAL, INSTRUCTION (ENGLISH, FRENCH, SPANISH, PORTUGUESE) 3-862-301-21 MANUAL, INSTRUCTION (GERMAN, DUTCH, SWEDISH, ITALIAN)(AEP) 3-862-301-31 MANUAL, INSTRUCTION (CHINESE)(MY,SP) – 47 – Part No. Description Remark TC-KB920S Sony Corporation 9-922-816-11 Home A&V Products Company – 48 – 98D0564-1 Printed in Japan © 1998. 4 Published by Quality Assurance Dept. (Shibaura)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : Yes Create Date : 1998:04:13 17:30:27 Producer : Acrobat Distiller 3.0 for Power Macintosh Modify Date : 1999:12:10 14:56:40 Page Count : 38 Page Mode : UseNoneEXIF Metadata provided by EXIF.tools