The Value Proposition Canvas Instruction Manual

the-value-proposition-canvas-instruction-manual

User Manual:

Open the PDF directly: View PDF PDF.
Page Count: 8

DownloadThe-value-proposition-canvas-instruction-manual
Open PDF In BrowserView PDF
The Value
Proposition
Canvas
Instruction Manual

The Value Proposition Canvas is a plug-in
tool to the Business Model Canvas. It allows
you to describe your Value Propositions and
the target Customer Segments in more detail
and evaluate the “fit” between the value you
intend to create and the expectations your
customers have.
You can use this map before, during and
after developing an in-depth knowledge of
your customers. If you use it before, it will
highlight what you need to learn about
customers and test about value propositions.
If you use it after, it will help you analyze and
evaluate “fit”.
The Value Proposition Canvas can be applied
to new and existing value propositions and
customer segments alike. In both cases it will
help you structure your thinking and make
your ideas more tangible.

Materials
Value Proposition Canvas Poster:
Ideally in B1 format
(707mm x 1000mm or 27.83in x 39.37in)
Medium sized Stattys in green, orange, and yellow:
See stattys.com for refills
Thick markers:
Keep your ideas rough
 trategyzer.com, the Business Model Toolbox
S
for iPad, or a Camera:
To capture and share the results sketched out on
your Canvas

Ground Rules
Don’t write on the map:
By using Stattys to describe your thoughts you will
be able to move things around, onto as well as off the
map. This is a very dynamic exercise and your value
proposition as well as your customer understanding will
change and evolve.
One idea per Statty:
Don’t make bullet points on Stattys. For instance,
use two Stattys to describe two different elements your
customers value, like a lower price and better

performance. This will allow you to play around with the
elements of your value proposition and modify things
when you learn from talking to customers.

Instructions
Start with customer jobs:
Start sketching out your map by describing what jobs a
specific customer of yours is trying to get done. Create
a Statty in the Customer Job(s) box for every major and
ancillary job you intend to help your customer get done.
Add pains and gains:
Create a Statty in the Pains box for every pain your
customer experiences or could experience before, during, and after getting the job done. Create a Statty in
the Gains box for every benefit your customer expects,
desires or would be surprised by.
Describe your products and services:
List all the products and services your value proposition
is built around by creating a Statty for each element in
the Products & Services box.
Outline how you intend to create value:
Describe how your products and services create value
by either killing customer pains or creating customer
gains. Create a sticky note for each element in the Pain
Relievers or Gain Creators box respectively.

Best Practices
Colour coding:
Using different colours for the different
elements can help you “read” the map
more quickly. You can use yellow Stattys
in the Customer Job(s) and Products & Services box, orange Stattys in the Pains box,
and green Stattys in the remaining boxes,
since they are all related to value creation.

Better
Smiles

Better
Smiles

Visuals & words:
Combining images and words to describe
the elements of your map is more powerful
than just using words. Our brain processes
images quicker than words. Hence, images
will allow viewers of your map more rapidly grasp the big picture.
Customer Knowledge:
Bring in people who are in frequent contact
with the customers you are targeting and
thus have deep customer knowledge.

Frequently Committed
Mistakes
Trying to alleviate every pain and
target every gain:
Mediocre or bad value propositions try to
address every customer pain and
gain they have identified and then often
fail to deliver.

Great value propositions often focus on a
limited number of pain relievers and gain
creators and then deliver on those
exceptionally well.
Mixing present and future:
Make sure you clearly distinguish between
presently existing and future ideas. Mixing
them can be confusing. You can easily
distinguish between the two by using colour
coding or by using separate maps.
One map per Value Proposition:
You shouldn’t try to sketch out several
value propositions and customer segments
on the same map. Focus on one value proposition for a specific customer segment on a
single map. Make a new map for a different
Value Proposition.
Intellectual masturbation:
A great Value Proposition with a great “fit”
on paper is just an untested fantasy. Use the 1.
Value Proposition Canvas as a starting point
to get out of the building and investigate
your assumptions. Ask yourself if you really
understand which jobs are important to
customers and what the related pains and
2.
gains are. Test if your assumptions about
how your products and services will relieve
pains and create gains are valid.

Today

Tomorrow

strategyzer.com
Copyright Strategyzer AG
The makers of Business Model Generation and Strategyzer
Produced by: stattys.com
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c014 79.156797, 2014/08/20-09:53:02
Create Date                     : 2014:12:11 16:25:05-05:00
Metadata Date                   : 2014:12:11 16:25:06-05:00
Modify Date                     : 2014:12:11 16:25:06-05:00
Creator Tool                    : Adobe InDesign CC 2014 (Macintosh)
Instance ID                     : uuid:c5b8e31f-e5a1-544b-852e-2efb5c33ee5b
Original Document ID            : xmp.did:87149F4121206811822AD4F35303C100
Document ID                     : xmp.id:37835d53-c0e3-4857-bd79-d948ad556331
Rendition Class                 : proof:pdf
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2014 (Macintosh)
History Changed                 : /
History When                    : 2014:12:11 16:25:05-05:00
Derived From Instance ID        : xmp.iid:69a6ee11-ef63-4c2a-ade7-f9b355e30a8e
Derived From Document ID        : xmp.did:87149F4121206811822AD4F35303C100
Derived From Original Document ID: xmp.did:87149F4121206811822AD4F35303C100
Derived From Rendition Class    : default
Format                          : application/pdf
Producer                        : Adobe PDF Library 11.0
Trapped                         : False
Page Count                      : 8
Creator                         : Adobe InDesign CC 2014 (Macintosh)
EXIF Metadata provided by EXIF.tools

Navigation menu