1.75mm Direct Titan Assembly Guide 19 En
User Manual:
Open the PDF directly: View PDF
Page Count: 19
- 1.75mm Direct Titan Assembly
- TOOLS:
- PARTS:
- Step 1 — Prep: Mounting Your Titan
- Step 2 — Gather Titan Body
- Step 3 — Attach Pinion Gear to Motor
- Step 4
- Step 5 — Place Drive Shaft
- Step 6 — Gather Direct Parts
- Step 7 — Slide in PTFE Tubing
- Step 8 — Cut Tubing and Prep Filament Guide
- Step 9 — Slot Hotend into Extruder
- Step 10 — Gather Idler
- Step 11 — Prep Idler
- Step 12 — Assemble Idler
- Step 13 — Gather Lid Parts
- Step 14 — Assemble Lid
- Step 15 — Screw in Lid 1
- Step 16 — Screw in Lid 2
- Step 17 — Screw in Lid 3
- Step 18 — Gear Alignment Check
- Step 19 — Check for Backlash
- Step 20 — PTFE Idler
- Step 21 — Firmware Configuration