TR9700 Traco Aluminum Windows

User Manual: TR9700

Open the PDF directly: View PDF .
Page Count: 8

Download
Open PDF In Browser	View PDF

08 51 00/TRA
BuyLine 1561

Beyond Windows. Beyond Doors.™

Palms Resort, Destin, FL

Del Monte Foods, Pittsburgh, PA
Architect: Strada Architecture

Flat Iron Building, New York, NY
Architect: Fifield Piaker Architects

Old Dominion University, Norfolk, VA
Architect: Clark-Nexsen Architecture and Engineering

08 51 00/TRA
BuyLine 1561

Avalon Towers, Mountain View, CA

The Streeter Building, Chicago, IL
Architect: Solomon Cordwell Benz & Associates

Architect: SLCE Architects

TRACO products are available
with a full range of glass,
screen, limit lock and muntin
choices. Most products can be
curved to meet field conditions.
In addition, most aluminum
surfaces can be coated
with the full range of aluminum finishes including paint
conforming to AAMA 2603,
AAMA 2604, AAMA 2605
or anodize conforming
to AAMA 611.
GENERAL CONDITIONS
• TRACO recommends
that you review with your
TRACO representative
the design load, jobsite
conditions and product
configurations before
preparing your plans and
specifications, as local
laws and building codes
governing fenestration
products vary widely
and are subject to interpretation by various building
team members.

CASEMENT

PROJECTED

• TRACO drawings and
specifications are published
as a public service only,
and TRACO disclaims all
liability for their use, application or adaptation.

SLIDING

FIXED

Warranty: TRACO products
carry comprehensive warranties available through your
design professional.
EXAMPLES OF
HISTORIC PANNING AND
CUSTOM SURROUNDS

SLIDING OR TERRACE
DOORS

Ma
Wt x. Sa
. (L sh
bs
.)

th
me
De
p
Fra

ila

TR
AC
Mo O
de
lN
um
“H
be
C” I
r
Co
mm – H
e
erc av
ial y
“C
” 4 or
Co –
mm
erc
ial
“A
W”
Ar J –
c
(O hite
pti ct
on ur
Av al
a

c ri
pt i
on

DOUBLE OR SINGLE
HUNG

• TRACO products are covered by a limited warranty,
tested to AAMA voluntary
specifications, and most
are thermally improved to
reduce condensation. Field
air and water performance
may vary with size changes
and field conditions.
• TRACO reserves the right
to change, without prior
notice, these drawings and
specifications, as TRACO
products are constantly
modified to meet project
requirements.

Optional
ble
)

Standard

De
s

This guide was developed to
assist the specifier in choosing the right product for
your project based on design
pressure and overall performance to ensure a successful
and enduring application.

AAMA DESIGNATIONS

8/08

Sty
le

Product Selection
Guide

Single Hung Side Load
Single Hung Side Load
Double Hung Side Load
Double Hung Side Load
Double Hung Side Load
Double Hung Tilt
Double Hung Tilt
Double Hung Tilt
Double Hung Tilt
Single Hung Tilt
Single Hung Tilt
Single Hung Tilt

TR-9100
TR-9700
TR-9400
TR-9600
TR-9900
NX-500
NX-501
TR-5000
TR-9000
NX-540
NX-541
TR-5400

H-HC40
H-HC40
H-HC50
H-HC80
H-HC65
H-C50
H-HC40
H-C45
H-HC45
H-C50
H-HC40
H-C35

H-AW40
H-AW40
H-AW65
H-AW100
H-AW95
N/A
—
N/A
H-AW45
—
—
N/A

3-1/4"
3-1/4"
4"
5-1/4"
4-1/2"
3-1/4"
3-1/4"
3-1/4"
4"
3-1/4"
3-1/4"
2-3/4"

70
70
80
150
150
40
60
40
60/80
40
60
40

2-1/4" Overlap Outswing
2-1/4" Overlap Inswing
3-1/4" Overlap Outswing
4-5/8" Flush Outswing
4-5/8" Flush Inswing
2-1/4" Flush Outswing
2-1/4" Flush Inswing
3-1/4" Overlap Outswing
3-1/4" Overlap Inswing
2-1/4" Overlap Project In
2-1/4" Overlap Project Out
3-1/4" Overlap Project Out
4-5/8" Flush Project In
4-5/8" Flush Project Out
2-1/4" Flush Project In
2-1/4" Flush Project Out
3-1/4" Overlap Project In
3-1/4" Overlap Project Out
3-1/4" Overlap Top Hinge Inswing

NX-210
NX-220
NX-310
TR-710
TR-720
TR-2100
TR-2200
TR-3100
TR-3200
NX-240
NX-250
NX-350
TR-740
TR-750
TR-2400
TR-2500
TR-3400
TR-3500
TR-3600

C-C50
C-C50
C-HC40***
C-HC70
C-HC80
C-HC70
C-HC80
C-HC80
C-HC80
AP-C50
AP-C50
AP-HC40***
AP-HC80
AP-HC80
AP-HC80
AP-HC80
AP-HC80
AP-HC80
TH-HC50

N/A
N/A
—
C-AW70
C-AW65
C-AW70
C-AW65
C-AW65
C-AW70
N/A
N/A
—
AP-AW80
AP-AW80
AP-AW80
AP-AW80
AP-AW70
AP-AW65
—

2-1/4"
2-1/4"
3-1/4"
4-5/8"
4-5/8"
2-1/4"
2-1/4"
3-1/4"
3-1/4"
2-1/4"
2-1/4"
3-1/4"
4-5/8"
4-5/8"
2-1/4"
2-1/4"
3-1/4"
3-1/4"
3-1/4"

90
90
116
116
116
116
116
90
90
90
90
116
116
116
162
162
162
162
130

3-1/4" Double Slide
3-1/4" Double Slide
4" Double Slide
3-1/4" Single Slide
2-3/4" Single Slide
3-1/4" Single Slide

NX-600
TR-6000
TR-6300
NX-640
TR-6400
TR-6800

HS-C50
HS-C45
HS-HC65
HS-C50
HS-C40
HS-HC60

—
N/A
HS-AW50
—
N/A
HS-AW50

3-1/4"
3-1/4"
4"
3-1/4"
2-3/4"
3-1/4"

100
100
170
100
100
170

2-1/4" Depth
3-1/4" Depth
3-1/4" Depth
3-1/4" Depth
4-5/8" Depth
2-1/4" Depth
3-1/4" Depth
3-1/4" Depth
2-3/4" Depth
3-1/4" Depth
4" Depth
2 Panel
2 Panel + Transom or 4 Panel
2, 3 or 4 Panel
Prehung Outswing
Prehung Inswing

NX-280
NX-380
NX-740
NX-741
TR-780
TR-2800
TR-3800
TR-7100
TR-7400
TR-7900
TR-9500
NX-840
TR-8300
TR-8410
NX-8910
NX-8920

F-C50
F-HC40***
F-C50
F-HC50
F-AW65
F-AW65
F-AW100
F-HC50
F-C65
F-HC65
F-HC65
SD-C40
—
SGD-HC40
ATD-AW50
ATD-AW50

N/A
—
N/A
—
N/A
N/A
N/A
F-AW80
N/A
F-AW90
F-AW100
—
SD-AW50
—
—
—

2-1/4"
3-1/4"
3-1/4"
3-1/4"
4-5/8"
2-1/4"
3-1/4"
3-1/4"
2-3/4"
3-1/4"
4"
4-3/8"
4-5/8"
4-1/2"
3¼" /4⅝"
3¼" /4⅝"

234
234
234
234
250
250
250
250
234
250
234
208
208
208
250
250

Str
u
( ps c t ur
f) al

.29
.06*
.27
.13*
.05*
.18*
.27
.17*
.16*
.12*
.29
.27*

10
15
12
15
10
10
8
7.5
10
10
8
5.25

40
40
50
80
65
50
40
45
45
50
40
35

40
40
50
80
65
50
40
N/A
45
N/A
40
N/A

60
60
75
120
97.5
75
60
67.5
67.5
75
60
52.5

32" x 60"
32" x 60"
36" x 60"
36" x 60"
36" x 60"
36" x 60"
36" x 60"
36" x 60"
36" x 60"
48" x 32"
48" x 32"
60" x 32"
HC [60" x 32"] or AW [60" x 36"]
HC [60" x 32"] or AW [60" x 36"]
HC [60" x 32"] or AW [60" x 36"]
HC [60" x 32"] or AW [60" x 36"]
HC [60" x 32"] or AW [60" x 36"]
HC [60" x 32"] or AW [60" x 36"]
60" x 99"

.04*
.06*

10
10

50
50

50
50

75
75

.02
.14
.02
.14
.20
.08
.06*
.11*

14
12
14
12
12
12
10
10

70
80
70
80
80
80
50
50

70
80
70
80
80
80
N/A
N/A

105
120
105
120
120
120
75
75

.14
.08
.14
.08
.10
.30
.06

12
12
12
12
12
12
10

80
80
80
80
80
80
50

80
80
80
80
80
65
50

120
120
120
120
120
120
75

71" x 60"
71" x 60"
99" x 79"
71" x 60"
71" x 60"
99" x 79"

.10*
.22*
.07
.13*
.10*
.15

12.5
9
10
10
6
10

50
45
65
50
40
60

N/A
N/A
65
N/A
N/A
60

75
67.5
97.5
75
60
90

.38**
.58**
.55**
.36**
.48**
.43**

60" x 60"
60" x 72"
60" x 60"
60" x 72"
60" x 99"
60" x 99"
60" x 99"
HC [60" x 72"] or AW [60" x 99"]
60" x 60"
HC [60" x 72"] or AW [60" x 99"]
HC [60" x 72"] or AW [60" x 99"]
96" x 84"
187" x 96"
116" x 94"
48" x 96"****
48" x 96"****

.03*

10

50

N/A

75

.03*
.03
.03
.03
.04
.07*
.03*
.03
.03
.12*
.09
.09
.05
.05

10
10
15
15
15
7.5
10
20
10
6.75
12
6
15
15

50
50
65
65
100
50
65
65
65
40
50
40
50
50

N/A
50
65
60
100
50
N/A
65
N/A
N/A
50
N/A
50
50

75
75
97.5
97.5
150
75
97.5
97.5
105
60
75
60
75
75

.33**
.32**
.31**

.51**
.51**
.67
.57**
.36**
.47**
.48
.37**

.38**
.38**
.41**

62**
62**
63

49**

61**

47**
55

57**
64**

51**
50**

61**

44**
44**
39**

44**
44**
39**

.63**
.63**

46**
46**

66**
66**

49**
53**

58**

49**

53**
54**
52**

59**
69**

46**
42**
53**

.33**

59**

72**

.33**
.42**

60**

69**

.42**

60**

69**

.34**
.55**
.60
.42**
.42**

.48**
.58**
45**
45**

TR-7100
TR-7100
TR-9450
TR-9650
TR-9950
NX-740
NX-741
TR-7100
TR-9500
NX-740
NX-741
TR-7400
NX-280
NX-280
NX-380
TR-780
TR-780
TR-2800
TR-2800
TR-3800
TR-3800
NX-280
NX-280
NX-380
TR-780
TR-780
TR-2800
TR-2800
TR-3800
TR-3800
TR-3800
NX-740
TR-7100
TR-9500
NX-740
TR-7400
TR-7100
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
TR-8350
N/A
NX-8950
NX-8950

lG
la z
ed
Int
eri
or
Bli
nd
Ex
s
ter
ior
Fla
ng
e

Du
a

las
s
Ma
tch
Fix ing
e
Fra d
me

CR
F- g

56**
56**
53 **

50**

.47**
.38**
.38**
.41**
.48**

CR
F- f

CR

e

ra m
e

OPTIONS

UV
alu

th
x

he

igh

t

60" x 99"
60" x 99"
60" x 99"
60" x 99"
60" x 99"
56" x 91"
60" x 99"
56" x 91"
60" x 99"
56" x 91"
60" x 99"
56" x 91"

w id

08 51 00/TRA
BuyLine 1561

PERFORMANCE
Air
(cf Infilt
m/ rat
sq ion
.ft.
)
Wa
ter
(ps Re
f)
sis
tan
ce
De
sig
( ps n P
re s
f)
su
re
De
fle
(ps ctio
f)
n

Pe
AA r
M
10 A/W
1/I
.S. DMA
2/A /CS
44
0-0 A
Fra
5
me
[Ve or
nt ]

TEST SIZES

•
•
•
•

•

•
•

•

•
•
•
•
•
•

AAMA
DESIGNATIONS
J AAMA

•
•
•
•
•
•
•
•
•

•
•
•
•
•
•

•
•

•
•
•
•
•
•
•
•
•
•

•
•
•
•
•
•
•

•
•

•
•
•

•
•
•
•
•
•
•
•
•

•

•

Includes: ‘Life Cycle’
testing
Test Sizes:
large sizes, similar
to “HC”
Design Pressure
Min.: 40 psf
Purpose: very large
openings with
heavy use
Typical Applications:
Educational and
Monumental

I AAMA Heavy
Commercial
“HC” Class
Includes: sash
removal by
maintenance
personnel only
Test Sizes: large
sizes
Design Pressure
Min.: 40 psf
Purpose: large
openings with
heavy use
Typical Applications:
Educational,
Historic
Replication

4AAMA

•

•
•
•
•

Architectural
“AW” Class

•
•

Commercial
“C” Class
Includes: heavy duty
(not residential)
hardware
Test Sizes: medium
sizes
Design Pressure
Min.: 30 psf
Purpose: medium
openings with
medium use
Typical Applications:
Multi-family,
Offices
* Tested @1.56
psf (all others air
infiltration tested
@6.24 psf)
** Thermal tested
with Low E glass
(all others thermal
tested with clear
glass)
*** Testing in
progress
**** Tested per
AAMA/WDMA/
CSA101/I.S.2/
A440-08

TRACO Blast™ Product Selection Guide
Configuration

Blast Pressure
Rating (PSI)

Impulse Rating
(PSI-mesc)

UFC 2002

UFC 2003

GSA Level C

06B3510

3-1/4"

Yes

Yes

O/X

5.8

48.1

•

•

•

Fixed / Project-Out

BLAST™ Plus

06B3510

3-1/4"

Yes

Yes

O/X

5.7

47.6

•

•

•

Fixed / Project-Out

BLAST™ Plus

06B3510

3-1/4"

Yes

Yes

O/X

12.1

82.2

•

•

•

Fixed / Outswing

BLAST™ Plus

06B3012

3-1/4"

Yes

Yes

O/X

5.9

50.4

•

•

•

Fixed

BLAST™ Plus

06B3800

3-1/4"

Yes

Yes

O

6.0

48.0

•

•

•

Fixed

BLAST™ Plus

06B3800

3-1/4"

Yes

Yes

O

6.0

47.3

•

•

•

Fixed

BLAST™ Plus

12B3800

3-1/4"

Yes

Yes

O

11.8

84.4

•

•

•

Fixed
1V1H Muntin

BLAST™ Ultra

42B7700

4-1/4"

Yes

Yes

1V1H

42.0

296.0

•

Fixed
1V2H Muntin

BLAST™ Ultra

42B7700

4-1/4"

Yes

Yes

1V2H

42.0

296.0

•

Fixed
5V7H Muntin

BLAST™ Ultra

42B7700

4-1/4"

Yes

Yes

5V7H

42.0

296.0

•

Fixed
1V1H Muntin

BLAST™ Ultra

42B7750

4-1/4"

No

No

1V1H

42.0

296.0

•

Fixed
1V2H Muntin

BLAST™ Ultra

42B7750

4-1/4"

No

No

1V2H

42.0

296.0

•

Single Hung

BLAST™ Plus

06B9100

3-1/4"

Yes

Yes

O/X

5.9

47.9

Blast Product Series:

BLAST™
BLAST™ Plus
BLAST™ Max
BLAST™ Ultra

•

•

LM Impact

Thermal
Frame
Insulating
Glass

BLAST™ Plus

DoS Embassy

Frame
Depth

Style

GSA Level D

Blast™
Model

Fixed / Project-Out

Description

Blast™
Product Series

BLAST RESISTANT WINDOWS

•
•

•
•

•
•

•

•

•
8/08

DoD Level Performance - 1psi Static
GSA Level C and/or D Performance - 4 to 12psi Dynamic
Custom Performance Needs - 12 to 40psi Dynamic
DoS Level Performance - 40+psi Dynamic

HURRCULES™ THERMAL IMPACT WINDOWS AND DOORS
Design
Pressure
Rating
PSF Pos+

Design
Pressure
Rating
PSF Neg-

Water
Test
Pressure
(PSF)

Missile
Impact
Tested
LM/SM***

Frame
Depth

Test
Size

Configuration

Test
Standard

FBC

I9100

110

110

12

LM/SM

3-1/4”

40” x 84”

O/X

ASTM

Yes

Horizontal Sliding

I6800

100

100

10

LM/SM

3-1/4”

111” X 63”

OXO

ASTM

Yes

Casement Outswing

I3100

100

100

15

LM/SM

3-1/4”

36” x 60”

X

ASTM

Yes

Description

Model #

Single Hung

WINDOWS

Projected Window

I3500

100

100

15

LM/SM

3-1/4”

63” x 71-3/4”

X

ASTM

Yes

Fixed

I3800

100

100

15

SM

3-1/4”

48” x 72”

O

ASTM

Yes

Fixed

I3800

120

120

15

LM

3-1/4”

48” x 72”

O

ASTM

Yes

Sliding Glass Door
Terrace Door Outswing
Terrace Door Outswing

I8300
I8910
I8910

90
95
130

90
110
150

15
18
18

LM
LM
SM

5”
3-1/4”
3-1/4”

192” x 96”
36” x 94”
36” x 94”

OXXO
X
X

ASTM
ASTM
ASTM

Yes
Yes
Yes

DOORS

8/08

Contact us for additional thermally efficient impact products which reflect recent code changes.

Biscayne Product Selection Guide
Description

Style
WINDOWS

DOORS

Model #

Design
Design
Pressure Pressure
Rating
Rating
PSF Pos+ PSF Neg-

08 51 00/TRA
BuyLine 1561

WINDOWS AND DOORS

Water
Test
Pressure
(PSF)

Missile
Impact Frame
Tested Depth
LM/SM***

Size

Configuration

Dade
County
NOA

FBC

Single Hung

SH2100

38.54

38.54

6.75

NI

2⅛"

53⅛" x 74¼"

O/X

Approved Yes

Single Hung Side Load

SH240

62

62

12

LM

2¾"

53¼" x 74¼"

O/X

Approved Yes

Single Hung Side Load

SH440

80

151.8

13

SM

2¾"

53⅛" x 84"

O/X

Approved Yes

Single Hung Side Load
Reinforced

SH440R

80

151.8*

13

SM

2¾"

53" x 84"

O/X

Approved Yes

Single Hung Side Load

SH540

90*

106

13

LM

2¾"

54¼" x 84"

O/X

Approved Yes

Single Hung (TI)

SH940

70

70

10

LM

2¾"

48" x 72"

O/X

Sliding
Window

HS2100

33*

33*

6.0 or
8 w/ sill riser

NI

2⅛"

53⅛" x 50⅝"

XO or OX

Approved Yes

Sliding
Window

HS2100

20*

20*

6.0 or
8 w/ sill riser

NI

2⅛"

109" x 63"

XOX or
OXO

Approved Yes

Sliding
Window

HS242

55

55

13.5 or
16 w/ sill riser

LM

2¾"

74" x 63"

XO

Approved Yes

Sliding Window
Optional

HS242

70

70

13.5 or
16 w/ sill riser

LM

2¾"

111" x 63"

XOX

Approved Yes

Sliding
Window

HS442

100

100

13.5 or
16 w/ sill riser

SM

2¾"

111" x 63"

XOX

Approved Yes

Sliding
Window

HS542

100

90*

13.5 or
16 w/ sill riser

LM

2¾"

111" x 63"

XOX

Approved Yes

Sliding
Window

HS942

50

50

10

LM

2¾"

72" x 60"

XO or OX

Casement Outswing

C1200

80

80

20

LM/SM

2½"

37" x 63"

X

Approved Yes

Fixed

PW2100

100.0

106.2

15

NI

2"

36" x 36"

O

Approved Yes

Fixed

PW1250

79.9*

79.9*

20

LM

2½"

37" x 74"

O

Approved Yes

Fixed

PW245

90

90

30

LM

2¾"

60" x 60"

O

Approved Yes

Fixed

PW445

120.0

120.0

20

SM

2¾"

48" x 60"

O

Approved Yes

Fixed Optional ⁷∕" SP

PW545

180.0*

112.2

30

LM

2¾"

30" x 60"

O

Approved Yes

Fixed

PW945

70

70

10

LM

2¾"

52" x 72"

O

Sliding Glass
Door

248

60**

60**

10.5

LM

5⅜"

143⅞" x 96"

OX XO
OXO

Approved Yes

Sliding Glass
Door

3000

41.7**

41.7**

9

NI

7¹∕"

227¾" x 96"

0XX0,
OXO, XXX,
OX, XO, XX

Approved Yes

Sliding Glass
Door SGD8000

72.7**

72.7**

18

SM

5"

168" x 119¼"

OXXO, OXO,
OX, XO

Approved Yes

Sliding Glass
Door SGD8000

93**

93**

18

LM

5"

192" x 120"

OOXXOO,
OXXO,
OOX, OXO
OX, XO

Approved Yes

144⅛" x 95¾" XXO, OXO, XO,
OX, XX

—

—

—

Yes

Yes

Yes

Terrace Door Outswing

Doral 3

50*

48.5*

7.5

NI

4"

Terrace Door Outswing

300

90

90

13.5

SM

4"

148" x 96"

OXXO, OXX, XXO Approved Yes
OXO, XO, OX, XX

Terrace Door Outswing

300

90

90

13.5

LM

4"

148" x 96"

OXXO, OXX, XXO, Approved Yes
OXO, XO, OX, XX

* Indicates alternative performance available based on sizing and configuration.
** Indicates minimum performance. Alternative DP ratings available based on size and configuration.
*** LM = Large Missile; SM = Small Missile; NI = Non-Impact

Approved Yes

8/08

Capabilities
DESIGN & ENGINEERING
TRACO’s design and engineering capabilities are
backed by a state-of-the-art computer assisted design and
drafting (CADD) system, including 3-dimensional color
plotting capability.
TESTING
Independently supervised and certified in-house testing
of TRACO windows and doors in a full -scale test chamber
is assurance that the products have the highest performance characteristics.

ENGINEERING

LAMINATING
TRACO installed lamination equipment to satisfy the increasing demand for
laminated windows, curtain wall, storefront, entrances and skylights. The
additional requirements for added safety and security are particularly evident
for educational facilities, government buildings and coastal buildings due to
International Building Codes (IBC) changes and recent threats to national
security. The equipment is the first of its kind installed in the United States.
TRACO has been tempering its own glass in-house as part of a routine production
line for more than 20 years.

TESTING

GLASS INSULATING

ANODIZING

EXTRUDING
TRACO extrudes on three modern presses its entire requirements for the
hundreds of aluminum extrusions necessary to offer a complete line of
architectural windows and doors.
APPLYING FINISHES
Anodize
The anodizing facility at TRACO utilizes the modern “two-step” process in
which the color is deposited deep within the aluminum surface through
electrodeposition, thereby reducing the expected color variation to a minimum.

GLASS LAMINATING

EXTRUDING

Clear Anodize (meets AAMA 611)
Available in both Class II (.4 mils) and Class I (.7 mils) finishes.
Color Anodize (meets AAMA 611)
Available only in a Class I (.7 mils) finish, in traditional bronze
anodized color choices.
HIGH-PERFORMANCE PAINTING
Superior finishes, meeting AAMA 2605, high-performance finishes, meeting
AAMA 2604 and standard finishes, meeting AAMA 2603, are applied
at TRACO in the most modern five-stage pretreatment, four-booth electrostatic
spray facility available.

GLASS TEMPERING

XYZ CUTTER

ARCHITECTURAL PAINT COATINGS

Headquarters and Manufacturing
71 Progress Avenue • Cranberry Township, PA 16066
(724) 776-7000 • (724) 776 -7014 FAX • (800) 837-7001
market@traco.com • www.traco.com
Manufacturing Facilities: Cranberry Township, PA • Johnson City, TN • Bainbridge, GA • Red Oak, IA



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Mode                       : UseThumbs
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:08:23
Producer                        : Acrobat Distiller 6.0.1 for Macintosh
Modify Date                     : 2008:12:08 09:46:09-05:00
Create Date                     : 2008:10:02 13:57:21-04:00
Metadata Date                   : 2008:12:08 09:46:09-05:00
Document ID                     : uuid:9f4899ba-90ab-11dd-ad08-0014511021d6
Instance ID                     : uuid:e702ee97-812a-431d-895f-a17b00f69e76
Format                          : application/pdf
Title                           : untitled
Page Count                      : 8
Page Layout                     : TwoColumnRight

EXIF Metadata provided by EXIF.tools