TR9700 Traco Aluminum Windows
User Manual: TR9700
Open the PDF directly: View PDF 
.
Page Count: 8
08 51 00/TRA
BuyLine 1561
B
e
y
o
n
d
W
i
n
d
o
w
s
.
B
e
y
o
n
d
D
o
o
r
s
.
™
Old Dominion University, Norfolk, VA
Architect: Clark-Nexsen Architecture and Engineering
Flat Iron Building, New York, NY
Architect: Fifield Piaker Architects
Del Monte Foods, Pittsburgh, PA
Architect: Strada Architecture
Palms Resort, Destin, FL
The Streeter Building, Chicago, IL
Architect: Solomon Cordwell Benz & Associates
Architect: SLCE Architects
08 51 00/TRA
BuyLine 1561
Avalon Towers, Mountain View, CA
Standard Optional
Frame Depth
Max. Sash
“HC”
I
– Heavy
Commercial
“C”
4
–
or
Architectural
Wt. (Lbs.)
TRACO
Model Number
Description
Style
AAMA DESIGNATIONS
“AW”
J
–
(Option Available)
Commercial
8/08
EXAMPLES OF
HISTORIC PANNING AND
CUSTOM SURROUNDS
Product Selection
Guide
TRACO products are available
with a full range of glass,
screen, limit lock and muntin
choices. Most products can be
curved to meet field conditions.
In addition, most aluminum
surfaces can be coated
with the full range of alumi-
num finishes including paint
conforming to AAMA 2603,
AAMA 2604, AAMA 2605
or anodize conforming
to AAMA 611.
GENERAL CONDITIONS
• TRACO recommends
that you review with your
TRACO representative
the design load, jobsite
conditions and product
configurations before
preparing your plans and
specifications, as local
laws and building codes
governing fenestration
products vary widely
and are subject to interpre-
tation by various building
team members.
• TRACO products are cov-
ered by a limited warranty,
tested to AAMA voluntary
specifications, and most
are thermally improved to
reduce condensation. Field
air and water performance
may vary with size changes
and field conditions.
• TRACO reserves the right
to change, without prior
notice, these drawings and
specifications, as TRACO
products are constantly
modified to meet project
requirements.
• TRACO drawings and
specifications are published
as a public service only,
and TRACO disclaims all
liability for their use, ap-
plication or adaptation.
Warranty: TRACO products
carry comprehensive warran-
ties available through your
design professional.
This guide was developed to
assist the specifier in choos-
ing the right product for
your project based on design
pressure and overall perfor-
mance to ensure a successful
and enduring application.
DOUBLE OR SINGLE Single Hung Side Load TR-9100 H-HC40 H-AW40 3-1/4" 70
HUNG Single Hung Side Load TR-9700 H-HC40 H-AW40 3-1/4" 70
Double Hung Side Load TR-9400 H-HC50 H-AW65 4" 80
Double Hung Side Load TR-9600 H-HC80 H-AW100 5-1/4" 150
Double Hung Side Load TR-9900 H-HC65 H-AW95 4-1/2" 150
Double Hung Tilt NX-500 H-C50 N/A 3-1/4" 40
Double Hung Tilt NX-501 H-HC40 — 3-1/4" 60
Double Hung Tilt TR-5000 H-C45 N/A 3-1/4" 40
Double Hung Tilt TR-9000 H-HC45 H-AW45 4" 60/80
Single Hung Tilt NX-540 H-C50 — 3-1/4" 40
Single Hung Tilt NX-541 H-HC40 — 3-1/4" 60
Single Hung Tilt TR-5400 H-C35 N/A 2-3/4" 40
CASEMENT 2-1/4" Overlap Outswing NX-210 C-C50 N/A 2-1/4" 90
2-1/4" Overlap Inswing NX-220 C-C50 N/A 2-1/4" 90
3-1/4" Overlap Outswing NX-310 C-HC40*** — 3-1/4" 116
4-5/8" Flush Outswing TR-710 C-HC70 C-AW70 4-5/8" 116
4-5/8" Flush Inswing TR-720 C-HC80 C-AW65 4-5/8" 116
2-1/4" Flush Outswing TR-2100 C-HC70 C-AW70 2-1/4" 116
2-1/4" Flush Inswing TR-2200 C-HC80 C-AW65 2-1/4" 116
3-1/4" Overlap Outswing TR-3100 C-HC80 C-AW65 3-1/4" 90
3-1/4" Overlap Inswing TR-3200 C-HC80 C-AW70 3-1/4" 90
PROJECTED 2-1/4" Overlap Project In NX-240 AP-C50 N/A 2-1/4" 90
2-1/4" Overlap Project Out NX-250 AP-C50 N/A 2-1/4" 90
3-1/4" Overlap Project Out NX-350 AP-HC40*** — 3-1/4" 116
4-5/8" Flush Project In TR-740 AP-HC80 AP-AW80 4-5/8" 116
4-5/8" Flush Project Out TR-750 AP-HC80 AP-AW80 4-5/8" 116
2-1/4" Flush Project In TR-2400 AP-HC80 AP-AW80 2-1/4" 162
2-1/4" Flush Project Out TR-2500 AP-HC80 AP-AW80 2-1/4" 162
3-1/4" Overlap Project In TR-3400 AP-HC80 AP-AW70 3-1/4" 162
3-1/4" Overlap Project Out TR-3500 AP-HC80 AP-AW65 3-1/4" 162
3-1/4" Overlap Top Hinge Inswing TR-3600 TH-HC50 — 3-1/4" 130
SLIDING 3-1/4" Double Slide NX-600 HS-C50 — 3-1/4" 100
3-1/4" Double Slide TR-6000 HS-C45 N/A 3-1/4" 100
4" Double Slide TR-6300 HS-HC65 HS-AW50 4" 170
3-1/4" Single Slide NX-640 HS-C50 — 3-1/4" 100
2-3/4" Single Slide TR-6400 HS-C40 N/A 2-3/4" 100
3-1/4" Single Slide TR-6800 HS-HC60 HS-AW50 3-1/4" 170
FIXED 2-1/4" Depth NX-280 F-C50 N/A 2-1/4" 234
3-1/4" Depth NX-380 F-HC40*** — 3-1/4" 234
3-1/4" Depth NX-740 F-C50 N/A 3-1/4" 234
3-1/4" Depth NX-741 F-HC50 — 3-1/4" 234
4-5/8" Depth TR-780 F-AW65 N/A 4-5/8" 250
2-1/4" Depth TR-2800 F-AW65 N/A 2-1/4" 250
3-1/4" Depth TR-3800 F-AW100 N/A 3-1/4" 250
3-1/4" Depth TR-7100 F-HC50 F-AW80 3-1/4" 250
2-3/4" Depth TR-7400 F-C65 N/A 2-3/4" 234
3-1/4" Depth TR-7900 F-HC65 F-AW90 3-1/4" 250
4" Depth TR-9500 F-HC65 F-AW100 4" 234
SLIDING OR TERRACE 2 Panel NX-840 SD-C40 — 4-3/8" 208
DOORS 2 Panel + Transom or 4 Panel TR-8300 — SD-AW50 4-5/8" 208
2, 3 or 4 Panel TR-8410 SGD-HC40 — 4-1/2" 208
Prehung Outswing NX-8910 ATD-AW50 — 3
¼"
/4
⅝"
250
Prehung Inswing NX-8920 ATD-AW50 — 3
¼"
/4
⅝"
250
Air Infiltration
Water Resistance
Deflection
Structural
U Value
CR
CRF-glass
Matching
Fixed
Frame
Dual Glazed
Interior Blinds
Per
AAMA/WDMA/CSA
Frame or
[Vent]
width x height
TEST SIZES PERFORMANCE
Design Pressure
(psf)
(psf)
(psf)
(cfm/sq.ft.)
101/I.S.2/A440-05
OPTIONS
(psf)
CRF-frame
JAAMA
Architectural
“AW” Class
Includes: ‘Life Cycle’
testing
Test Sizes:
large sizes, similar
to “HC”
Design Pressure
Min.: 40 psf
Purpose: very large
openings with
heavy use
Typical Applications:
Educational and
Monumental
IAAMA Heavy
Commercial
“HC” Class
Includes: sash
removal by
maintenance
personnel only
Test Sizes: large
sizes
Design Pressure
Min.: 40 psf
Purpose: large
openings with
heavy use
Typical Applications:
Educational,
Historic
Replication
4AAMA
Commercial
“C” Class
Includes: heavy duty
(not residential)
hardware
Test Sizes: medium
sizes
Design Pressure
Min.: 30 psf
Purpose: medium
openings with
medium use
Typical Applications:
Multi-family,
Offices
AAMA
DESIGNATIONS
* Tested @1.56
psf (all others air
infiltration tested
@6.24 psf)
** Thermal tested
with Low E glass
(all others thermal
tested with clear
glass)
*** Testing in
progress
**** Tested per
AAMA/WDMA/
CSA101/I.S.2/
A440-08
Exterior Flange
60" x 99" .29 10 40 40 60 .51** 56** 62** TR-7100 •
60" x 99" .06* 15 40 40 60 .51** 56** 62** TR-7100
60" x 99" .27 12 50 50 75 .67 53 ** 63 TR-9450 • •
60" x 99" .13* 15 80 80 120 TR-9650 • •
60" x 99" .05* 10 65 65 97.5 .57** 49** 61** TR-9950 •
56" x 91" .18* 10 50 50 75 .36** 50** NX-740 •
60" x 99" .27 8 40 40 60 NX-741 •
56" x 91" .17* 7.5 45 N/A 67.5 .47** 47** 57** TR-7100 •
60" x 99" .16* 10 45 45 67.5 .48 55 64** TR-9500 • • •
56" x 91" .12* 10 50 N/A 75 .37** 51** NX-740 •
60" x 99" .29 8 40 40 60 NX-741 •
56" x 91" .27* 5.25 35 N/A 52.5 .47** 50** 61** TR-7400
32" x 60" .04* 10 50 50 75 .38** 44** NX-280 •
32" x 60" .06* 10 50 50 75 .38** 44** NX-280 •
36" x 60" .41** 39** NX-380 •
36" x 60" .02 14 70 70 105 .48** TR-780 • •
36" x 60" .14 12 80 80 120 TR-780 • •
36" x 60" .02 14 70 70 105 TR-2800 • • •
36" x 60" .14 12 80 80 120 TR-2800 • • •
36" x 60" .20 12 80 80 120 TR-3800 • •
36" x 60" .08 12 80 80 120 TR-3800 • •
48" x 32" .06* 10 50 N/A 75 .38** 44** NX-280 •
48" x 32" .11* 10 50 N/A 75 .38** 44** NX-280 •
60" x 32" .41** 39** NX-380 •
HC [60" x 32"] or AW [60" x 36"] .14 12 80 80 120 TR-780 • •
HC [60" x 32"] or AW [60" x 36"] .08 12 80 80 120 TR-780 • •
HC [60" x 32"] or AW [60" x 36"] .14 12 80 80 120 .63** 46** 66** TR-2800 • • •
HC [60" x 32"] or AW [60" x 36"] .08 12 80 80 120 .63** 46** 66** TR-2800 • • •
HC [60" x 32"] or AW [60" x 36"] .10 12 80 80 120 TR-3800 • •
HC [60" x 32"] or AW [60" x 36"] .30 12 80 65 120 TR-3800 • •
60" x 99" .06 10 50 50 75 TR-3800 • •
71" x 60" .10* 12.5 50 N/A 75 .38** 49** NX-740 •
71" x 60" .22* 9 45 N/A 67.5 .58** 49** 58** TR-7100 •
99" x 79" .07 10 65 65 97.5 .55** 53** TR-9500 • •
71" x 60" .13* 10 50 N/A 75 .36** 53** NX-740 •
71" x 60" .10* 6 40 N/A 60 .48** 54** 59** TR-7400
99" x 79" .15 10 60 60 90 .43** 52** 69** TR-7100 •
60" x 60" .03* 10 50 N/A 75 .33** 46** N/A •
60" x 72" .32** 42** N/A •
60" x 60" .03* 10 50 N/A 75 .31** 53** N/A •
60" x 72" .03 10 50 50 75 N/A
60" x 99" .03 15 65 65 97.5 .33** 59** 72** N/A • •
60" x 99" .03 15 65 60 97.5 N/A • • •
60" x 99" .04 15 100 100 150 .33** N/A • •
HC [60" x 72"] or AW [60" x 99"] .07* 7.5 50 50 75 .42** 60** 69** N/A • • •
60" x 60" .03* 10 65 N/A 97.5 N/A
HC [60" x 72"] or AW [60" x 99"] .03 20 65 65 97.5 .42** 60** 69** N/A
HC [60" x 72"] or AW [60" x 99"] .03 10 65 N/A 105 N/A • •
96" x 84" .12* 6.75 40 N/A 60 .34** .48** N/A
187" x 96" .09 12 50 50 75 .55** .58** TR-8350
116" x 94" .09 6 40 N/A 60 .60 N/A
48" x 96"**** .05 15 50 50 75 .42** 45** NX-8950
48" x 96"**** .05 15 50 50 75 .42** 45** NX-8950
08 51 00/TRA
BuyLine 1561
TRACO Blast™ Product Selection Guide
BLAST RESISTANT WINDOWS
HURRCULES™ THERMAL IMPACT WINDOWS AND DOORS
Contact us for additional thermally efficient impact products which reflect recent code changes.
Design Design Water Missile
Description Model # Pressure Pressure Test Impact Frame Test Config- Test FBC
Rating Rating Pressure Tested Depth Size uration Standard
PSF Pos+ PSF Neg- (PSF) LM/SM***
WINDOWS
Single Hung I9100 110 110 12 LM/SM 3-1/4” 40” x 84” O/X ASTM Yes
Horizontal Sliding I6800 100 100 10 LM/SM 3-1/4” 111” X 63” OXO ASTM Yes
Casement Outswing I3100 100 100 15 LM/SM 3-1/4” 36” x 60” X ASTM Yes
Projected Window I3500 100 100 15 LM/SM 3-1/4” 63” x 71-3/4” X ASTM Yes
Fixed I3800 100 100 15 SM 3-1/4” 48” x 72” O ASTM Yes
Fixed I3800 120 120 15 LM 3-1/4” 48” x 72” O ASTM Yes
DOORS
Sliding Glass Door I8300 90 90 15 LM 5” 192” x 96” OXXO ASTM Yes
Terrace Door Outswing I8910 95 110 18 LM 3-1/4” 36” x 94” X ASTM Yes
Terrace Door Outswing I8910 130 150 18 SM 3-1/4” 36” x 94” X ASTM Yes
8/08
8/08
Blast Product Series: BLAST™ DoD Level Performance - 1psi Static
BLAST™ Plus GSA Level C and/or D Performance - 4 to 12psi Dynamic
BLAST™ Max Custom Performance Needs - 12 to 40psi Dynamic
BLAST™ Ultra DoS Level Performance - 40+psi Dynamic
Style
Thermal
Frame
Insulating
Glass
Configuration
Blast Pressure
Rating (PSI)
Impulse Rating
(PSI-mesc)
UFC 2002
UFC 2003
GSA Level C
GSA Level D
DoS Embassy
LM Impact
Frame
Depth
Blast™
Model
Blast™
Product Series
Description
Fixed / Project-Out BLAST™ Plus 06B3510 3-1/4" Yes Yes O/X 5.8 48.1 • • •
Fixed / Project-Out BLAST™ Plus 06B3510 3-1/4" Yes Yes O/X 5.7 47.6 • • • •
Fixed / Project-Out BLAST™ Plus 06B3510 3-1/4" Yes Yes O/X 12.1 82.2 • • • • •
Fixed / Outswing BLAST™ Plus 06B3012 3-1/4" Yes Yes O/X 5.9 50.4 • • • •
Fixed BLAST™ Plus 06B3800 3-1/4" Yes Yes O 6.0 48.0 • • •
Fixed BLAST™ Plus 06B3800 3-1/4" Yes Yes O 6.0 47.3 • • • •
Fixed BLAST™ Plus 12B3800 3-1/4" Yes Yes O 11.8 84.4 • • • • •
Fixed
1V1H Muntin BLAST™ Ultra 42B7700 4-1/4" Yes Yes 1V1H 42.0 296.0 •
Fixed
1V2H Muntin BLAST™ Ultra 42B7700 4-1/4" Yes Yes 1V2H 42.0 296.0 •
Fixed
5V7H Muntin BLAST™ Ultra 42B7700 4-1/4" Yes Yes 5V7H 42.0 296.0 •
Fixed
1V1H Muntin BLAST™ Ultra 42B7750 4-1/4" No No 1V1H 42.0 296.0 •
Fixed
1V2H Muntin BLAST™ Ultra 42B7750 4-1/4" No No 1V2H 42.0 296.0 •
Single Hung BLAST™ Plus 06B9100 3-1/4" Yes Yes O/X 5.9 47.9 • • • •
Style
Biscayne Product Selection Guide
WINDOWS AND DOORS
WINDOWS
8/08
* Indicates alternative performance available based on sizing and configuration.
** Indicates minimum performance. Alternative DP ratings available based on size and configuration.
*** LM = Large Missile; SM = Small Missile; NI = Non-Impact
DOORS
D
esign Design Water Missile Dade
Description Model # Pressure Pressure Test Impact Frame Config-
Rating Rating Pressure Tested Depth Size uration
County FBC
PSF Pos+ PSF Neg- (PSF) LM/SM***
NOA
Single Hung SH2100 38.54 38.54 6.75 NI 2⅛" 53⅛" x 74¼" O/X Approved Yes
Single Hung Side Load SH240 62 62 12 LM 2¾" 53¼" x 74¼" O/X Approved Yes
Single Hung Side Load SH440 80 151.8 13 SM 2¾" 53⅛" x 84" O/X Approved Yes
Single Hung Side Load
Reinforced
SH440R 80 151.8* 13 SM 2¾" 53" x 84" O/X Approved Yes
Single Hung Side Load SH540 90* 106 13 LM 2¾" 54¼" x 84" O/X Approved Yes
Single Hung (TI) SH940 70 70 10 LM 2¾" 48" x 72" O/X — Yes
Sliding
HS2100 33* 33* 6.0 or
Window 8 w/ sill riser NI 2⅛" 53⅛" x 50⅝" XO or OX Approved Yes
Sliding
HS2100 20* 20* 6.0 or XOX or
Window 8 w/ sill riser NI 2⅛" 109" x 63" OXO
Approved Yes
Sliding HS242 55 55 13.5 or
Window 16 w/ sill riser LM 2¾" 74" x 63" XO Approved Yes
Sliding Window HS242 70 70 13.5 or
Optional 16 w/ sill riser LM 2¾" 111" x 63" XOX Approved Yes
Sliding HS442 100 100 13.5 or
Window 16 w/ sill riser SM 2¾" 111" x 63" XOX Approved Yes
Sliding HS542 100 90* 13.5 or
Window 16 w/ sill riser LM 2¾" 111" x 63" XOX Approved Yes
Sliding HS942 50 50 10
Window
LM 2¾" 72" x 60" XO or OX — Yes
Casement Outswing C1200 80 80 20 LM/SM 2½" 37" x 63" X Approved Yes
Fixed PW2100 100.0 106.2 15 NI 2" 36" x 36" O Approved Yes
Fixed PW1250 79.9* 79.9* 20 LM 2½" 37" x 74" O Approved Yes
Fixed PW245 90 90 30 LM 2¾" 60" x 60" O Approved Yes
Fixed PW445 120.0 120.0 20 SM 2¾" 48" x 60" O Approved Yes
Fixed Optional ⁷∕ " SP PW545 180.0* 112.2 30 LM 2¾" 30" x 60" O Approved Yes
Fixed PW945 70 70 10 LM 2¾" 52" x 72" O — Yes
Sliding Glass
248 60** 60** 10.5 LM 5⅜" 143⅞" x 96" OX XO
Door OXO
Approved Yes
Sliding Glass 0XX0,
Door 3000 41.7** 41.7** 9 NI 7¹∕ " 227¾" x 96" OXO, XXX, Approved Yes
OX, XO, XX
Sliding Glass
SGD8000 72.7** 72.7** 18 SM 5" 168" x 119¼" OXXO, OXO,
Door OX, XO
Approved Yes
Sliding Glass OOXXOO,
Door SGD8000 93** 93** 18 LM 5" 192" x 120" OXXO,
OOX, OXO
Approved Yes
OX, XO
Terrace Door Outswing Doral 3 50* 48.5* 7.5 NI 4" 144⅛" x 95¾" XXO, OXO, XO,
OX, XX
Approved Yes
Terrace Door Outswing 300 90 90 13.5 SM 4" 148" x 96" OXXO, OXX, XXO
OXO, XO, OX, XX Approved Yes
Terrace Door Outswing 300 90 90 13.5 LM 4" 148" x 96" OXXO, OXX, XXO,
OXO, XO, OX, XX Approved Yes
08 51 00/TRA
BuyLine 1561
Headquarters and Manufacturing
71 Progress Avenue • Cranberry Township, PA 16066
(724) 776-7000 • (724) 776 -7014 FAX • (800) 837-7001
market@traco.com • www.traco.com
Manufacturing Facilities: Cranberry Township, PA • Johnson City, TN • Bainbridge, GA • Red Oak, IA
ARCHITECTURAL PAINT COATINGS
Capabilities
DESIGN & ENGINEERING
TRACO’s design and engineering capabilities are
backed by a state-of-the-art computer assisted design and
drafting (CADD) system, including 3-dimensional color
plotting capability.
TESTING
Independently supervised and certified in-house testing
of TRACO windows and doors in a full -scale test chamber
is assurance that the products have the highest performance characteristics.
LAMINATING
TRACO installed lamination equipment to satisfy the increasing demand for
laminated windows, curtain wall, storefront, entrances and skylights. The
additional requirements for added safety and security are particularly evident
for educational facilities, government buildings and coastal buildings due to
International Building Codes (IBC) changes and recent threats to national
security. The equipment is the first of its kind installed in the United States.
TRACO has been tempering its own glass in-house as part of a routine production
line for more than 20 years.
EXTRUDING
TRACO extrudes on three modern presses its entire requirements for the
hundreds of aluminum extrusions necessary to offer a complete line of
architectural windows and doors.
APPLYING FINISHES
Anodize
The anodizing facility at TRACO utilizes the modern “two-step” process in
which the color is deposited deep within the aluminum surface through
electrodeposition, thereby reducing the expected color variation to a minimum.
Clear Anodize (meets AAMA 611)
Available in both Class II (.4 mils) and Class I (.7 mils) finishes.
Color Anodize (meets AAMA 611)
Available only in a Class I (.7 mils) finish, in traditional bronze
anodized color choices.
HIGH-PERFORMANCE PAINTING
Superior finishes, meeting AAMA 2605, high-performance finishes, meeting
AAMA 2604 and standard finishes, meeting AAMA 2603, are applied
at TRACO in the most modern five-stage pretreatment, four-booth electrostatic
spray facility available.
ENGINEERING TESTING
GLASS INSULATING ANODIZING
EXTRUDINGGLASS LAMINATING
GLASS TEMPERING XYZ CUTTER
