UEFI_Driver_HII_Win_Lab_Guide Uefi Driver Hii Win Lab Guide
User Manual:
Open the PDF directly: View PDF 
.
Page Count: 96
| Download | |
| Open PDF In Browser | View PDF |
UEFI Driver HII Win Lab Guide[DRAFT]
TABLE OF CONTENTS
UEFI_Driver_HII_Win_Lab_Guide
UEFI Driver Wizard – Adding HII Labs
Lab 1. Adding Strings and Forms to Setup HII for User Configuration
a. Setup for Lab adding HII
b. Edit Driver for adding HII
Lab 2. Updating HII to Save Data Settings
Lab 3. Updating your driver to initialize data from the VFR data to the HII Database
Lab 4. Updating the Menu: Reset Button
Lab 5. Updating the Menu: Pop-up Box
Lab 6. Updating the Menu: Creating a String to Name a Saved Configuration
Lab 7. Updating the Menu: Numeric Entry
Lab 8. Updating your Driver for Interactive Call Backs
Lab 9. Add code to your driver when Call Back events occur for Interactive Items
Lab 10. Adding an Additional Form Page
Lab 11. Adding Communication from Driver to Console through HII
Lab Setup
Microsoft Windows 10 – Visual Studio command prompt
Reference
Microsoft Windows and Visual Studio Matrix
Glossary of UEFI Terms and Acronyms
Helpful Links
DRAFT FOR REVIEW [11/08/2018 08:04:02]
1
UEFI Driver HII Win Lab Guide[DRAFT]
UEFI_Driver_HII_Win_Lab_Guide
UEFI DRIVER HII WIN LAB GUIDE
UEFI and EDK II Base Training
Lab and Reference Guide
Assumes Windows 10
DRAFT FOR REVIEW
11/08/2018 08:04:02
Revision 01.0
Contributed by
Laurie Jarlstrom, Intel Corporation
Acknowledgements
Redistribution and use in source (original document form) and 'compiled' forms (converted to
PDF, epub, HTML and other formats) with or without modification, are permitted provided
that the following conditions are met:
1. Redistributions of source code (original document form) must retain the above copyright
notice, this list of conditions and the following disclaimer as the first lines of this file
unmodified.
2. Redistributions in compiled form (transformed to other DTDs, converted to PDF, epub,
HTML and other formats) must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials
provided with the distribution.
THIS DOCUMENTATION IS PROVIDED BY TIANOCORE PROJECT "AS IS" AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL TIANOCORE PROJECT BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
DRAFT FOR REVIEW [11/08/2018 08:04:02]
2
UEFI Driver HII Win Lab Guide[DRAFT]
UEFI_Driver_HII_Win_Lab_Guide
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS DOCUMENTATION,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Copyright (c) 2018, Intel Corporation. All rights reserved.
Revision History
Revision
01.0
Revision History
Initial release.
DRAFT FOR REVIEW [11/08/2018 08:04:02]
Date
July 2018
3
UEFI Driver HII Win Lab Guide[DRAFT]
UEFI Driver Wizard – Adding HII Labs
UEFI DRIVER WIZARD – ADDING HII
DRAFT FOR REVIEW [11/08/2018 08:04:02]
4
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 1. Adding Strings and Forms to Setup HII for User Configuration
Lab 1. Adding Strings and Forms to Setup HII
for User Configuration
In this lab, you’ll learn how to use HII to add strings and forms to a firmware setup menu for
user configuration. Once you’ve complete this lab, your end result will match Figure 1.
Figure 1 My Wizard Driver menu with strings and forms
DRAFT FOR REVIEW [11/08/2018 08:04:02]
5
UEFI Driver HII Win Lab Guide[DRAFT]
a. Setup for Lab adding HII
Lab 1 a. Setup for Lab adding HII
1. Complete Lab Setup to configure for building with Visual Studio.
2. Start with LAB 6. on Driver porting Lab solution and create a folder called
MyWizardDriver in the C:\fw\edk2 workspace
3. Now, locate and open: C:\FW\LabSampleCode\MyWizardDriver
DRAFT FOR REVIEW [11/08/2018 08:04:02]
6
UEFI Driver HII Win Lab Guide[DRAFT]
a. Setup for Lab adding HII
4. Copy the following Files to C:\FW\edk2\MyWizardDriver
5. Open Visual Studio Command Prompt
6. Type CD C:\fw\edk2
7. Type Edksetup (This is only needed if starting out with a new Visual Studio Command
Prompt Window )
DRAFT FOR REVIEW [11/08/2018 08:04:02]
7
UEFI Driver HII Win Lab Guide[DRAFT]
a. Setup for Lab adding HII
DRAFT FOR REVIEW [11/08/2018 08:04:02]
8
UEFI Driver HII Win Lab Guide[DRAFT]
b. Edit Driver for adding HII
Lab 1 b. Edit Driver for adding HII
1. Open C:\fw\edk2\MyWizardDriver
2. Open the following files for updating:
MyWizardDriverNVDataStruc.h
MyWizardDriver.vfr
MyWizardDriver.uni
MyWizardDriver.h
MyWizardDriver.c
MyWizardDriver.inf
3. Update the MyWizardDriverNVDataStruc.h file by copying and pasting the following
GUID as shown below: This GUID is used to communicate to the HII Database and
Browser Engine
#define MYWIZARDDRIVER_FORMSET_GUID \
{ \
0x5481db09, 0xe5f7, 0x4158, 0xa5, 0xc5, 0x2d, 0xbe, 0xa4, 0x95, 0x34, 0xff \
}
4. Save MyWizardDriverNVDataStruc.h
5. Update the MyWizardDriver.vfr file. Delete its contents and replace it with the
following by copying and pasting: You’re adding a reference to the GUID and to the
NVRAM storage where the configuration will be saved. In fact, you’re replacing most of
the original .vfr.
DRAFT FOR REVIEW [11/08/2018 08:04:02]
9
UEFI Driver HII Win Lab Guide[DRAFT]
b. Edit Driver for adding HII
#include "MyWizardDriverNVDataStruc.h"
formset
guid
= MYWIZARDDRIVER_FORMSET_GUID,
title
= STRING_TOKEN(STR_SAMPLE_FORM_SET_TITLE),
help
= STRING_TOKEN(STR_SAMPLE_FORM_SET_HELP),
classguid = EFI_HII_PLATFORM_SETUP_FORMSET_GUID,
//
// Define a Buffer Storage (EFI_IFR_VARSTORE)
//
varstore MYWIZARDDRIVER_CONFIGURATION,
// This is the data structure type
//varid = CONFIGURATION_VARSTORE_ID,
// Optional VarStore ID
name
= MWD_IfrNVData,
// Define referenced name in vfr
guid
= MYWIZARDDRIVER_FORMSET_GUID;
// GUID of this buffer storage
6. Continue adding the remaining code to MyWizardDriver.vfr. This is a Enable/ Disable
question for the setup menu in the form of a Check box.
form formid = 1, title = STRING_TOKEN(STR_SAMPLE_FORM1_TITLE);
subtitle text = STRING_TOKEN(STR_SUBTITLE_TEXT);
subtitle text = STRING_TOKEN(STR_SUBTITLE_TEXT2);
//
// Define a checkbox to enable / disable the device
//
checkbox varid
= MWD_IfrNVData.MyWizardDriverChooseToEnable,
prompt
= STRING_TOKEN(STR_CHECK_BOX_PROMPT),
help
= STRING_TOKEN(STR_CHECK_BOX_HELP),
//
// CHECKBOX_DEFAULT indicate this checkbox is marked
//
with EFI_IFR_CHECKBOX_DEFAULT
//
flags
= CHECKBOX_DEFAULT ,
key
= 0,
default
= 1,
endcheckbox;
endform;
endformset;
7). Save MyWizardDriver.vfr
8). Update MyWizardDriver.uni file. You’ll add new strings to support the forms. Delete the
file’s content and replace it with the following by copying and pasting:
DRAFT FOR REVIEW [11/08/2018 08:04:02]
10
UEFI Driver HII Win Lab Guide[DRAFT]
b. Edit Driver for adding HII
#langdef en "English"
#string STR_SAMPLE_FORM_SET_TITLE
#language en
"My Wizard
Driver Sample Forms
#string STR_SAMPLE_FORM_SET_HELP
#language en
"Help for Sample Formset"
#string STR_SAMPLE_FORM1_TITLE
#language en
"My Wizard Driver"
#string STR_SUBTITLE_TEXT
#language en "My Wizard Driver Configuration"
#string STR_SUBTITLE_TEXT2
#language en "Device XYZ Configuration"
#string STR_CHECK_BOX_PROMPT
#language en "Enable My XYZ Device"
#string STR_CHECK_BOX_HELP
#language en "This is the help message for th
et"
e enable My XYZ device. Check this box to enable this device."
9). Save MyWizardDriver.uni
10). Update the MyWizardDriver.h file. Add the following HII libraries starting at
approximately line 41 (as shown below) by copying and pasting:
// Added for HII
#include
#include
#include
#include
11). To add a data structure for HII routing and access, add the following code at
approximately line 75 by copying and pasting after the “
DRAFT FOR REVIEW [11/08/2018 08:04:02]
extern
” statements:
11
UEFI Driver HII Win Lab Guide[DRAFT]
b. Edit Driver for adding HII
#define MYWIZARDDRIVER_DEV_SIGNATURE SIGNATURE_32 ('m', 'w', 'd', 'r')
// Need a Data structure for HII routing and accessing
typedef struct {
UINT32
Signature;
EFI_HANDLE
Handle;
MYWIZARDDRIVER_CONFIGURATION
Configuration;
EFI_HANDLE
DriverHandle[2];
EFI_HII_HANDLE
HiiHandle[2];
//
// Consumed protocol
//
EFI_HII_DATABASE_PROTOCOL
*HiiDatabase;
EFI_HII_STRING_PROTOCOL
*HiiString;
EFI_HII_CONFIG_ROUTING_PROTOCOL
*HiiConfigRouting;
EFI_FORM_BROWSER2_PROTOCOL
*FormBrowser2;
//
// Produced protocol
//
EFI_HII_CONFIG_ACCESS_PROTOCOL
ConfigAccess;
} MYWIZARDDRIVER_DEV;
#define MYWIZARDDRIVER_DEV_FROM_THIS(a)
CR (a, MYWIZARDDRIVER_DEV, ConfigAccess, MY
WIZARDDRIVER_DEV_SIGNATURE)
#pragma pack(1)
///
/// HII specific Vendor Device Path definition.
///
typedef struct {
VENDOR_DEVICE_PATH
VendorDevicePath;
EFI_DEVICE_PATH_PROTOCOL
End;
} HII_VENDOR_DEVICE_PATH;
#pragma pack()
DRAFT FOR REVIEW [11/08/2018 08:04:02]
12
UEFI Driver HII Win Lab Guide[DRAFT]
b. Edit Driver for adding HII
12). Save MyWizardDriver.h
13). Update MyWizardDriver.c file.
Add local definitions for the form GUID, variable name, and device path for HII at
approximately line 13 after the
#include "MyWizardDriver.h"
by coping and pasting the
following code.
In this step, you declare a local (to the module “
m
”) variable for the GUID we declared; the
NVRAM variable name; driver handles; our configuration data; and the device path support.
DRAFT FOR REVIEW [11/08/2018 08:04:02]
13
UEFI Driver HII Win Lab Guide[DRAFT]
b. Edit Driver for adding HII
// Begin code
//HII support
EFI_GUID
mMyWizardDriverFormSetGuid = MYWIZARDDRIVER_FORMSET_GUID;
CHAR16
mIfrVariableName[] = L"MWD_IfrNVData";
EFI_HANDLE
mDriverHandle[2] = {NULL, NULL};
MYWIZARDDRIVER_DEV
*PrivateData = NULL;
// HII support for Device Path
HII_VENDOR_DEVICE_PATH
mHiiVendorDevicePath = {
{
{
HARDWARE_DEVICE_PATH,
HW_VENDOR_DP,
{
(UINT8) (sizeof (VENDOR_DEVICE_PATH)),
(UINT8) ((sizeof (VENDOR_DEVICE_PATH)) >> 8)
}
},
MYWIZARDDRIVER_FORMSET_GUID
},
{
END_DEVICE_PATH_TYPE,
END_ENTIRE_DEVICE_PATH_SUBTYPE,
{
(UINT8) (END_DEVICE_PATH_LENGTH),
(UINT8) ((END_DEVICE_PATH_LENGTH) >> 8)
}
}
};
// end code
14). Locate EFI_STATUS within the function
MyWizardDriver.c
MyWizardDriverDriverEntryPoint
in the
file (approx. Line 184) and add HII local definitions by copying and pasting
(as shown below):
// HII Locals
EFI_HII_PACKAGE_LIST_HEADER
*PackageListHeader;
EFI_HII_DATABASE_PROTOCOL
*HiiDatabase;
EFI_HII_HANDLE
HiiHandle[2];
EFI_STRING
ConfigRequestHdr;
UINTN
BufferSize;
DRAFT FOR REVIEW [11/08/2018 08:04:02]
14
UEFI Driver HII Win Lab Guide[DRAFT]
b. Edit Driver for adding HII
15). Locate the ASSERT_EFI_ERROR (Status); statement and the line: // Retrieve HII
Package List Header on ImageHandle (approximately line 202). Now, add the following
code to install the configuration access protocol (produced) by copying and pasting (as
shown below) before the line: // Retrieve HII Package List Header on ImageHandle
//Now do HII Stuff
// Initialize the local variables.
ConfigRequestHdr = NULL;
// Initialize driver private data
PrivateData = AllocateZeroPool (sizeof (MYWIZARDDRIVER_DEV));
if (PrivateData == NULL) {
return EFI_OUT_OF_RESOURCES;
}
PrivateData->Signature = MYWIZARDDRIVER_DEV_SIGNATURE;
PrivateData->ConfigAccess.ExtractConfig = MyWizardDriverHiiConfigAccessExtractConfig
;
PrivateData->ConfigAccess.RouteConfig = MyWizardDriverHiiConfigAccessRouteConfig;
PrivateData->ConfigAccess.Callback = MyWizardDriverHiiConfigAccessCallback;
//
// Publish sample Fromset and config access
//
Status = gBS->InstallMultipleProtocolInterfaces (
&mDriverHandle[0],
&gEfiDevicePathProtocolGuid,
&mHiiVendorDevicePath,
&gEfiHiiConfigAccessProtocolGuid,
&PrivateData->ConfigAccess,
NULL
);
ASSERT_EFI_ERROR (Status);
PrivateData->DriverHandle[0] = mDriverHandle[0];
// end code
DRAFT FOR REVIEW [11/08/2018 08:04:02]
15
UEFI Driver HII Win Lab Guide[DRAFT]
b. Edit Driver for adding HII
16). Next, add code to register a list of HII packages in the HII Database with the HII device
path. This requires you to replace existing code (see below) by copying and pasting the new
code at approx. line 265.
Old Code
mDriverHandle[0],
&HiiHandle[0]
DRAFT FOR REVIEW [11/08/2018 08:04:02]
16
UEFI Driver HII Win Lab Guide[DRAFT]
b. Edit Driver for adding HII
New Code
17). Next, you’ll add code to initialize the My Wizard Driver NVRAM variable by copying and
pasting the following code before the
ImageHandle
// Install Driver Supported EFI Version Protocol onto
comment (as shown below at approximately line 273):
// Begin code
PrivateData->HiiHandle[0] = HiiHandle[0];
BufferSize = sizeof (MYWIZARDDRIVER_CONFIGURATION);
// IF driver is not part of the Platform then need to get/set defaults for the NVRAM
configuration that the driver will use.
Status = gRT->GetVariable (
mIfrVariableName,
&mMyWizardDriverFormSetGuid,
NULL,
&BufferSize,
&PrivateData->Configuration
);
if (EFI_ERROR (Status)) {
// Not definded yet so add it to the NV Variables.
// zero out buffer
ZeroMem (&PrivateData->Configuration, sizeof (MYWIZARDDRIVER_CONFIGURATION));
Status = gRT->SetVariable(
mIfrVariableName,
&mMyWizardDriverFormSetGuid,
EFI_VARIABLE_NON_VOLATILE | EFI_VARIABLE_BOOTSERVICE_ACCESS,
sizeof (MYWIZARDDRIVER_CONFIGURATION),
&PrivateData->Configuration
//
buffer is 000000
now
);
}
// end code
DRAFT FOR REVIEW [11/08/2018 08:04:02]
17
UEFI Driver HII Win Lab Guide[DRAFT]
b. Edit Driver for adding HII
18). Save MyWizardDriver.c
19). Now onto the final file, MyWizardDriver.inf. Add the following protocols in the [protocols]
section that are being used by copying and pasting (as shown below):
gEfiHiiStringProtocolGuid
## CONSUMES
gEfiHiiConfigRoutingProtocolGuid
## CONSUMES
gEfiFormBrowser2ProtocolGuid
## CONSUMES
gEfiHiiDatabaseProtocolGuid
## CONSUMES
20). Save the MyWizardDriver.inf file. All the files should be saved at this point.
21). Add MyWizardDriver.inf to the Nt32Pkg.dsc(See Lab 2building MyWizardDriver from
the Driver Porting Lab)
DRAFT FOR REVIEW [11/08/2018 08:04:02]
18
UEFI Driver HII Win Lab Guide[DRAFT]
b. Edit Driver for adding HII
Build and test MyWizardDriver
1. Re-Open the Visual Studio Command Prompt
2. Type build
3. Type build run
4. At the UEFI Shell prompt,type fs0:
5. Type Load MyWizardDriver.efi
6. Press “Enter” This will load your driver into memory
7. Type exit
8. Now at the setup front page menu, select “Device Manager”
9. Press “Enter” to enter “Device Manager”
10. Inside the Device Manager menu press the down to “My Wizard Driver Sample
Formset”** Press "Enter"
Press "Enter"
DRAFT FOR REVIEW [11/08/2018 08:04:02]
19
UEFI Driver HII Win Lab Guide[DRAFT]
b. Edit Driver for adding HII
Note: Notice that your form is now displayed with a choice to enable your device. Also
notice the titles and help strings that are in the .UNI file you edited.
At this point since the HII configuration routing functions are not functional the values
(Enable/ Disable) will not be saved to NVRAM. The next lab will update the HII Extract,
Route, and call back functions for the HII configuration routing protocol your driver will
produce.
11. Press the space bar to Enable and Disable the “Enable My XYZ Device”
12. Press F10 to attempt to save
DRAFT FOR REVIEW [11/08/2018 08:04:02]
20
UEFI Driver HII Win Lab Guide[DRAFT]
b. Edit Driver for adding HII
Note: You’re not able to save the data changes at this point.
13. Press “Enter”**
14. Press “Escape”, and then “Y” to exit*
15. To Exit the “Device Manager” Page: Press “Escape”
16. Press Up Arrow to “Continue”**
17. At the Shell prompt type Reset
18. Press “Enter” to return to the Visual Studio Command Prompt
DRAFT FOR REVIEW [11/08/2018 08:04:02]
21
UEFI Driver HII Win Lab Guide[DRAFT]
b. Edit Driver for adding HII
You’ve completed the first lab and added strings and forms to setup HII for user
configuration. However, the data is not saved to NVRAM. In the next lab, you’ll learn how
to update HII to save data to NVRAM.
For any build issues copy the solution files from C:\Fw\LabSolutions\LessonE.1A
end of Lab 1
DRAFT FOR REVIEW [11/08/2018 08:04:02]
22
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 2. Updating HII to Save Data Settings
Lab 2. Updating HII to Save Data Settings
In this lab, you’ll learn how to modify and update your driver’s HII code to save the users
settings into NVRAM. The UEFI Driver Wizard created the protocols for your driver to update
and interface with the HII browser engine and database. The HII configuration access
Protocol functions for MyWizardDriver are in the file
C:\fw\edk2\MyWizardDriver\HiiConfigAccess.c. This next lab will install these protocols and
update them to save the user data from the HII menus into NVRAM.
1. Update the
MyWizardDriver.c
file
Your driver will need to keep track of the consumed protocols in it’s own data structure
so it will need to declare local pointers to these and then store them in its own private
context data structure.
2. Add the following local variable declarations in the function
MyWizardDriverDriverEntryPoint
Entry Point (as shown below Approx. line 185 ):
EFI_HII_STRING_PROTOCOL
*HiiString;
EFI_FORM_BROWSER2_PROTOCOL
*FormBrowser2;
EFI_HII_CONFIG_ROUTING_PROTOCOL *HiiConfigRouting;
3. Add the following code to locate and store consumed protocols before the
sample Fromset and config access
// Publish
comment (as shown below Approx. line 227):
The reason is to Locate the Hii Database, Hii String, Hii Form browser and config
routing protocols and store their pointers into the Private context data structure for your
driver to access.
DRAFT FOR REVIEW [11/08/2018 08:04:02]
23
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 2. Updating HII to Save Data Settings
//Begin code
//
// Locate Hii Database protocol
//
Status = gBS->LocateProtocol (&gEfiHiiDatabaseProtocolGuid, NULL, (VOID **) &HiiData
base);
if (EFI_ERROR (Status)) {
return Status;
}
PrivateData->HiiDatabase = HiiDatabase;
//
// Locate HiiString protocol
//
Status = gBS->LocateProtocol (&gEfiHiiStringProtocolGuid, NULL, (VOID **) &HiiString
);
if (EFI_ERROR (Status)) {
return Status;
}
PrivateData->HiiString = HiiString;
//
// Locate Formbrowser2 protocol
//
Status = gBS->LocateProtocol (&gEfiFormBrowser2ProtocolGuid, NULL, (VOID **) &FormBr
owser2);
if (EFI_ERROR (Status)) {
return Status;
}
PrivateData->FormBrowser2 = FormBrowser2;
//
// Locate ConfigRouting protocol
//
Status = gBS->LocateProtocol (&gEfiHiiConfigRoutingProtocolGuid, NULL, (VOID **) &Hi
iConfigRouting);
if (EFI_ERROR (Status)) {
return Status;
}
PrivateData->HiiConfigRouting = HiiConfigRouting;
//End code
DRAFT FOR REVIEW [11/08/2018 08:04:02]
24
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 2. Updating HII to Save Data Settings
4). Since the Hii Database Protocol was located earlier in the code with the previous code
insertion and is no longer necessary, comment out the old OpenProtocol code with the
“
//
” (approx. lines 289-298, as shown below) and add the comment "
Make sure not to comment out the second “
if (!EFI_ERROR (Status)) {
DRAFT FOR REVIEW [11/08/2018 08:04:02]
//
" Done above
”
25
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 2. Updating HII to Save Data Settings
Note: The earlier
LocateProtocol
code already found the pointer to the Hii Database
protocol and stored it to the local pointer variable
HiiDatabase
.
When we added the driver-consumed protocols, we searched via
LocateProtocol
for the Hii
Database pointer function. Since we did it above we’re now commenting out this code.
5). Comment out the matching “
}
” with “
//
” to the if statement (as shown below at
approx. line 310):
6). Save MyWizardDriver.c
7). Open C:\fw\edk2\MyWizardDriver\HiiConfigAccess.c.
The Driver Wizard only made dummy functions for the extract, route and callback functions.
In order to save the Data passed into the forms from the Hii Browser engine, you will need to
port these functions to be functional.
8). Add the following extern statements for the form GUID and the NVRam variable (as
shown below) these are global to the driver module only hence the beginning lower case “m”
is the standard for a global for a module :
extern EFI_GUID
mMyWizardDriverFormSetGuid;
extern CHAR16
mIfrVariableName[];
DRAFT FOR REVIEW [11/08/2018 08:04:02]
26
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 2. Updating HII to Save Data Settings
9). Locate
MyWizardDriverHiiConfigAccessExtractConfig
EFI_NOT_FOUND
and replace line 108, “
return
”, with the following code spread over Next pages:
//Begin code
EFI_STATUS
Status;
UINTN
BufferSize;
MYWIZARDDRIVER_DEV
*PrivateData;
EFI_HII_CONFIG_ROUTING_PROTOCOL
*HiiConfigRouting;
EFI_STRING
ConfigRequest;
EFI_STRING
ConfigRequestHdr;
UINTN
Size;
BOOLEAN
AllocatedRequest;
if (Progress == NULL || Results == NULL) {
return EFI_INVALID_PARAMETER;
}
//
// Initialize the local variables.
//
ConfigRequestHdr
= NULL;
ConfigRequest
= NULL;
Size
= 0;
*Progress
= Request;
AllocatedRequest
= FALSE;
PrivateData = MYWIZARDDRIVER_DEV_FROM_THIS (This);
HiiConfigRouting = PrivateData->HiiConfigRouting;
//
// Get Buffer Storage data from EFI variable.
// Try to get the current setting from variable.
//
BufferSize = sizeof (MYWIZARDDRIVER_CONFIGURATION);
Status = gRT->GetVariable (
mIfrVariableName,
&mMyWizardDriverFormSetGuid,
NULL,
&BufferSize,
&PrivateData->Configuration
);
if (EFI_ERROR (Status)) {
DRAFT FOR REVIEW [11/08/2018 08:04:02]
27
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 2. Updating HII to Save Data Settings
return EFI_NOT_FOUND;
}
if (Request == NULL) {
DEBUG ((DEBUG_INFO, "\n:: Inside of Extract Config and Request == Null "));
} else {
ConfigRequest = Request;
}
//
// Convert buffer data to by helper function BlockToConfig()
//
Status = HiiConfigRouting->BlockToConfig (
HiiConfigRouting,
ConfigRequest,
(UINT8 *) &PrivateData->Configuration,
BufferSize,
Results,
Progress
);
//
// Free the allocated config request string.
//
if (AllocatedRequest) {
FreePool (ConfigRequest);
}
//
// Set Progress string to the original request string.
//
if (Request == NULL) {
*Progress = NULL;
} else if (StrStr (Request, L"OFFSET") == NULL) {
*Progress = Request + StrLen (Request);
}
return Status;
// End code
10). Now locate
with “
MyWizardDriverHiiConfigAccessRouteConfig
return EFI_NOT_FOUND
and replace line at approx. 228,
”, with the following code:
//Begin code
EFI_STATUS
Status;
UINTN
BufferSize;
MYWIZARDDRIVER_DEV
*PrivateData;
EFI_HII_CONFIG_ROUTING_PROTOCOL
*HiiConfigRouting;
DRAFT FOR REVIEW [11/08/2018 08:04:02]
28
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 2. Updating HII to Save Data Settings
if (Configuration == NULL || Progress == NULL) {
return EFI_INVALID_PARAMETER;
}
PrivateData = MYWIZARDDRIVER_DEV_FROM_THIS (This);
HiiConfigRouting = PrivateData->HiiConfigRouting;
*Progress = Configuration;
//
// Get Buffer Storage data from EFI variable
//
BufferSize = sizeof (MYWIZARDDRIVER_CONFIGURATION);
Status = gRT->GetVariable (
mIfrVariableName,
&mMyWizardDriverFormSetGuid,
NULL,
&BufferSize,
&PrivateData->Configuration
);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Convert to buffer data by helper function ConfigToBlock()
//
BufferSize = sizeof (MYWIZARDDRIVER_CONFIGURATION);
Status = HiiConfigRouting->ConfigToBlock (
HiiConfigRouting,
Configuration,
(UINT8 *) &PrivateData->Configuration,
&BufferSize,
Progress
);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Store Buffer Storage back to EFI variable
//
Status = gRT->SetVariable(
mIfrVariableName,
&mMyWizardDriverFormSetGuid,
EFI_VARIABLE_NON_VOLATILE | EFI_VARIABLE_BOOTSERVICE_ACCESS,
sizeof (MYWIZARDDRIVER_CONFIGURATION),
&PrivateData->Configuration
);
DEBUG ((DEBUG_INFO, "\n:: ROUTE CONFIG Saving the configuration to NVRAM \n"
));
return Status;
DRAFT FOR REVIEW [11/08/2018 08:04:02]
29
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 2. Updating HII to Save Data Settings
//return EFI_NOT_FOUND;
//end code
11). Lastly, locate MyWizardDriverHiiConfigAccessCallback and replace at approx.** line
326, “return EFI_UNSUPPORTED**;”, with the following code:
//Begin code
MYWIZARDDRIVER_DEV
*PrivateData;
EFI_STATUS
Status;
EFI_FORM_ID
FormId;
DEBUG ((DEBUG_INFO, "\n:: START Call back ,Question ID=0x%08x Type=0x%04x Action=0
x%04x", QuestionId, Type, Action));
if (((Value == NULL) && (Action != EFI_BROWSER_ACTION_FORM_OPEN) && (Action != EFI_B
ROWSER_ACTION_FORM_CLOSE))||
(ActionRequest == NULL)) {
return EFI_INVALID_PARAMETER;
}
FormId = 0;
Status = EFI_SUCCESS;
PrivateData = MYWIZARDDRIVER_DEV_FROM_THIS (This);
return Status;
//end code
12). Save HiiConfigAccess.c
Build and test MyWizardDriver
1. Open the Visual Studio Command Prompt
2. Type build
3. Type build run
DRAFT FOR REVIEW [11/08/2018 08:04:02]
30
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 2. Updating HII to Save Data Settings
4. At the UEFI Shell prompt,type fs0:
5. Type Load MyWizardDriver.efi
6. Press “Enter”
7. Type exit
8. Now at the setup front page menu, select “Device Manager”
9. Press “Enter” to enter “Device Manager”
10. Inside the Device Manager menu press the down to “My Wizard Driver Sample
Formset”** Press "Enter"
Press "Enter"
Note: Once you hit “Enter”, notice that your form is now displayed with a choice to
enable your Device. Also notice the titles and help strings that are in the .UNI file you
edited.
DRAFT FOR REVIEW [11/08/2018 08:04:02]
31
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 2. Updating HII to Save Data Settings
11. Test by Press the space bar to Enable and Disable the “Enable My XYZ Device” to
change its value from:
Note: Notice the “
[X]
to
[ ]
Configuration changed
” message at the menu bottom.
12. Press “F10”
13. Press “Escape” to exit
14. Press “Escape” to exit the “Device Manager” Page
15. Press Up Arrow to “Continue”
16. Press “Enter”
17. At the Shell Prompt type
Shell> dmpstore -all
Notice that enable is selected and saved in NVRam as the value of 0x00:
Because our data structure in
MyWizardDriverNVDataStruc.h
variable name
of type
MWD_IfrNVData
is stored in NVRAM with the
MYWIZARDDRIVER_CONFIGURATION
, we can see the
changes from our menu accessing through our HII forms.
Notice that the enable/disable byte is the last byte in data structure
MWD_IfrNVData.MyWizardDriverChooseToEnable
where
00 == disable
and
01 == enable
.
18. Type Reset to return to the Visual Studio Command Prompt
For any build issues copy the solution files from C:\Fw\LabSolutions\LessonE.2
NOTE: Del Directory C:\fw\edk2\Build\NT32IA32\DEBUG_VS2010x86\IA32\MyWizardDriver
before the Build command to build the MyWizardDriver Clean
DRAFT FOR REVIEW [11/08/2018 08:04:02]
32
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 2. Updating HII to Save Data Settings
End of Lab 2
DRAFT FOR REVIEW [11/08/2018 08:04:02]
33
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 3. Updating your driver to initialize data from the VFR data to the HII Database
Lab 3. Updating your driver to initialize data
from the VFR data to the HII Database
In this lab, you’ll learn how to update your driver to initialize the data according to the
defaults set in the .VFR file. Thus when the user enters your driver’s menu for the first time,
the values will display the defaults according to the .VFR file settings. You will also learn the
rich set of HII function calls that are part of the
MdeModulePkg
in the
HiiLib
by reviewing
the “MdeModulePkg Document.chm”.
Lab 3a. Add HII Library Calls to Your Driver
For this lab you will update the following files: MyWizardDriver.inf, MyWizardDriver.h, and
MyWizardDriver.c
1. Update the MyWizardDriver.inf file
2. Add the following package (as shown below):
The HII Library in the MdeModulePkg has many functions to help with Communication
to/from the Hii Database and Hii forms. One function call HiiSetToDefaults will compare
the default settings from the .VFR file and update the driver’s configuration buffer
according to the settings in the .VFR file.
MdeModulePkg/MdeModulePkg.dec
Note: For other functions from the HII Library,
open the .chm file “MdeModulePkg Document.chm” and search for
HiiLib.h
.
3). Add the following library class (as shown below):
HiiLib
4). Save MyWizardDriver.inf
5). Update the MyWizardDriver.h file
DRAFT FOR REVIEW [11/08/2018 08:04:02]
34
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 3. Updating your driver to initialize data from the VFR data to the HII Database
6). Add the following code (as shown below):
#include
7). Save MyWizardDriver.h
8). Update the MyWizardDriver.c file
9). Add Locals: first add 2 locals for your drivers configuration buffer and a boolean flag
from the Hii Library calls
Add the following at Approx. Line 190.
MYWIZARDDRIVER_CONFIGURATION
*Configuration;
BOOLEAN
ActionFlag;
10). Add the following to the MyWizardDriverDriverEntryPoint entry point funtion to line 319,
approximately after “
BufferSize =
” as shown below
DRAFT FOR REVIEW [11/08/2018 08:04:02]
35
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 3. Updating your driver to initialize data from the VFR data to the HII Database
// Begin code
//
// Initialize configuration data
//
Configuration = &PrivateData->Configuration;
ZeroMem (Configuration, sizeof (MYWIZARDDRIVER_CONFIGURATION));
//
// Try to read NV config EFI variable first
//
ConfigRequestHdr = HiiConstructConfigHdr (&mMyWizardDriverFormSetGuid, mIfrVariableN
ame, mDriverHandle[0]);
ASSERT (ConfigRequestHdr != NULL);
// End code
11). Modify the following lines:
@~338
: remove: “
@~342
: remove line:
&PrivateData->
” from the “
&PrivateData->Configuration
”
ZeroMem (&PrivateData->Configuration, sizeof
(MYWIZARDDRIVER_CONFIGURATION));
@~347
: remove: “
&PrivateData->
12). Add the following code to the
” from the “
&PrivateData->Configuration
MyWizardDriverDriverEntryPoint
”
entry point code at
approximately line 349 before
// Install Driver Supported EFI Version Protocol onto ImageHandle
DRAFT FOR REVIEW [11/08/2018 08:04:02]
You’re deleting the “
}
"
36
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 3. Updating your driver to initialize data from the VFR data to the HII Database
and replacing it with the following code (as shown below). With this replacement we are
adding an “
Note the “
else
}
a duplicate “
” to the “
if
” statement:
” on line 361 is still matching the initial if statement. Make sure you do not have
}
”
//Begin code
//
// EFI variable for NV config doesn't exist, we should build this variable
// based on default values stored in IFR
//
ActionFlag = HiiSetToDefaults (ConfigRequestHdr, EFI_HII_DEFAULT_CLASS_STANDARD);
ASSERT (ActionFlag);
} else {
//
// EFI variable does exist and Validate Current Setting
//
ActionFlag = HiiValidateSettings (ConfigRequestHdr);
ASSERT (ActionFlag);
}
// Match if (EFI_ERROR (Status))
FreePool (ConfigRequestHdr);
// end HII
// End code
13). Save the MyWizardDriver.c file
Build and test MyWizardDriver
1. Open the Visual Studio Command Prompt
2. Type build
DRAFT FOR REVIEW [11/08/2018 08:04:02]
37
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 3. Updating your driver to initialize data from the VFR data to the HII Database
3. Type build run
4. At the UEFI Shell prompt,type fs0:
5. Type Load MyWizardDriver.efi and then Press “Enter”
6. Type exit
7. Now at the setup front page menu, select “Device Manager”
8. Press “Enter” to enter “Device Manager”
9. Inside the Device Manager menu press the down to “My Wizard Driver Sample
Formset”
10. Press “Enter”
11. Press “Escape” to exit
12. Press “Escape” to Exit the “Device Manager” Page
13. Press Up Arrow to “Continue” and then Press “Enter”
DRAFT FOR REVIEW [11/08/2018 08:04:02]
38
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 3. Updating your driver to initialize data from the VFR data to the HII Database
14. Type "
Reset
" to return to the Visual Studio Command Prompt
For any build issues copy the solution files from C:\Fw\LabSolutions\LessonE.3 NOTE: Del
Directory C:\fw\edk2\Build\NT32IA32\DEBUG_VS2010x86\IA32\MyWizardDriver before the
Build command to build the MyWizardDriver Clean
Lab 3b. Add your Driver to the platform
As of now, your driver needs to be soft loaded each time from the shell prompt. In this lab,
you’ll update the platform .FDF file to force your driver to load as part of the platform UEFI
driver.
1. Open to update: C:\fw\edk2\Nt32PkgNt32Pkg.Fdf
2. Add the following code (as shown below before “
!if $(BUILD_NEW_SHELL) == TRUE
” ):
INF MyWizardDriver/MyWizardDriver.inf
3. Save Nt32pkg.fdf
Build and test MyWizardDriver
1. Open the Visual Studio Command Prompt
2. Type build
3. Type build run
4. At the UEFI Shell prompt,type "
Exit
"
5. Now at the setup front page menu, select “Device Manager”
DRAFT FOR REVIEW [11/08/2018 08:04:02]
39
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 3. Updating your driver to initialize data from the VFR data to the HII Database
6. Press “Enter” to enter “Device Manager”
7. Inside the Device Manager menu Notice that the My Wizard Driver Sample Formset is
added without having to issue the “Load” command from the shell prompt.
8. Press “Escape” to exit the “Device Manager” Page
9. Press Up Arrow to “Continue”
10. Press “Enter”
11. Type "
Reset
" to return to the Visual Studio Command Prompt
For any build issues copy the solution files from C:\Fw\LabSolutions\LessonE.3
DRAFT FOR REVIEW [11/08/2018 08:04:02]
40
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 3. Updating your driver to initialize data from the VFR data to the HII Database
NOTE: Del Directory C:\fw\edk2\Build\NT32IA32\DEBUG_VS2010x86\IA32\MyWizardDriver
before the Build command to build the MyWizardDriver Clean
End of Lab 3
DRAFT FOR REVIEW [11/08/2018 08:04:02]
41
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 4. Updating the Menu: Reset Button
Lab 4. Updating the Menu: Reset Button
In this lab, you’ll learn how to add a resetbutton to your driver’s form menu. It’s time to add
more configuration fields to your menu, enabling users to modify more fields now that you’ve
built a driver that 1) saves data from forms into NVRAM 2) updates data from the .VFR
forms and 3) builds into the platform drivers.
The next set of labs will update .VFR,
MyWizardDriver.vfr
, and UNI
MyWizardDriver.uni
string files to incrementally add a reset button (Lab 4), pop-up box (Lab 5), string name (Lab
6), and numeric hex value (Lab 7) to your driver’s form menu:
1). Update the MyWizardDriver.vfr file 2). Add the following code (as shown below after the
“GUID” definition Apprx. Line 29):
prompt =
MyStandardDefault
,
STRING_TOKEN(STR_STANDARD_DEFAULT_PROMPT),
attribute = 0x0000;
// Default ID: 0000 standard default
3). Add the folowing code before the “
endform
” (as shown below Approx. Line 55):
resetbutton
defaultstore = MyStandardDefault,
prompt
= STRING_TOKEN(STR_STANDARD_DEFAULT_PROMPT_RESET),
help
= STRING_TOKEN(STR_STANDARD_DEFAULT_HELP),
endresetbutton;
4). Save MyWizardDriver.vfr
5). Update the MyWizardDriver.uni file
DRAFT FOR REVIEW [11/08/2018 08:04:02]
42
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 4. Updating the Menu: Reset Button
6). Add the following strings at the end of the file to support the “
STR_
“ referenced added in
the .vfr file:
#string STR_STANDARD_DEFAULT_PROMPT
#language en "Standard Default"
#string STR_STANDARD_DEFAULT_PROMPT_RESET
#string STR_STANDARD_DEFAULT_HELP
#language en "Reset to Standard Default"
#language en "This will reset all the Questions
to their standard default value"
7). Save MyWizardDriver.uni
Build and test MyWizardDriver
1. Open the Visual Studio Command Prompt
2. Type build
3. Type build run
4. At the UEFI Shell prompt,type exit
1. Now at the setup front page menu, select “Device Manager”
2. Press “Enter” to enter “Device Manager”
3. Inside the Device Manager menu press the down arrow to “My Wizard Driver Sample
Formset” Press "Enter"
4. Access the My Wizard Driver menu and notice the item “Reset to Standard Default”
DRAFT FOR REVIEW [11/08/2018 08:04:02]
43
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 4. Updating the Menu: Reset Button
5. Press Down Arrow to “Reset to Standard Default”
6. Press “Enter" to select
7. Notice the “Configuration changed” message at the bottom of the menu
8. To Exit Press “Escape” then “Y”
9. To Exit the “Device Manager” Page: Press “Escape”
10. Press Up Arrow to “Continue”
Observe: Notice that since this change requires a reset, the Nt32 will exit out
completely.
11. Press “Enter” to return to the Visual Studio Command Prompt
For any build issues copy the solution files from C:\Fw\LabSolutions\LessonE.4
NOTE: Del Directory C:\fw\edk2\Build\NT32IA32\DEBUG_VS2010x86\IA32\MyWizardDriver
before the Build command to build the MyWizardDriver Clean.
DRAFT FOR REVIEW [11/08/2018 08:04:02]
44
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 4. Updating the Menu: Reset Button
End of Lab 4
DRAFT FOR REVIEW [11/08/2018 08:04:02]
45
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 5. Updating the Menu: Pop-up Box
Lab 5. Updating the Menu: Pop-up Box
In this lab, you’ll learn how to add a pop-up box to your driver’s form menu by using the
“oneof” VFR term. We will also only update the MyWizardDriver.vfr and MyWizardDriver.uni
files.
Figure 5 My Wizard Driver with a pop-up box
Background Information The VFR term “oneof” will declare a pop-up menu. The user then
selects one field that will dictate the value stored in the NVRAM variable. Looking at Figure 5
above, there are three values:
Value
Display
String token
0
500 Hex
STR_ONE_OF_TEXT3
1
480 Hex
STR_ONE_OF_TEXT2
2
400 Hex
STR_ONE_OF_TEXT1
For this lab you will add code to give your driver menu a pop-up menu item by defining a
“oneof” item. Also, if the device is “disabled”, then use the VFR term “grayoutif” statement
so that the pop-up menu is not accessible and cannot be changed. The browser engine will
DRAFT FOR REVIEW [11/08/2018 08:04:02]
46
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 5. Updating the Menu: Pop-up Box
use the configuration variable
0x0
MWD_IfrNVData.MyWizardDriverChooseToEnable
with a value of
to determine if the device is enabled or disabled
1. Update the MyWizardDriver.vfr file
2. Add the following code before the “
resetbutton
” statement (approximately line 53)
// Begin code
//
// Define oneof (EFI_IFR_ONE_OF)
//
grayoutif
ideqval MWD_IfrNVData.MyWizardDriverChooseToEnable == 0x0;
oneof name = MyOneOf2,
// Define reference name for
Question
varid
= MWD_IfrNVData.MyWizardDriverBaseAddress,
// Use "DataStructure.Member" to reference Buffer Storage
prompt
= STRING_TOKEN(STR_ONE_OF_PROMPT),
help
= STRING_TOKEN(STR_ONE_OF_HELP),
//
// Define an option (EFI_IFR_ONE_OF_OPTION)
//
option text = STRING_TOKEN(STR_ONE_OF_TEXT3), value = 0x0, flags = 0;
option text = STRING_TOKEN(STR_ONE_OF_TEXT2), value = 0x1, flags = 0;
//
// DEFAULT indicate this option will be marked with
//
EFI_IFR_OPTION_DEFAULT
//
option text = STRING_TOKEN(STR_ONE_OF_TEXT1), value = 0x2,
flags = DEFAULT;
endoneof;
endif;
// end code
DRAFT FOR REVIEW [11/08/2018 08:04:02]
47
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 5. Updating the Menu: Pop-up Box
3. Save the MyWizardDriver.vfr file
4. Update the MyWizardDriver.uni file
5. Add the following code to the end of the file (as shown below):
// begin code
#string STR_ONE_OF_PROMPT
#language en "Select Base Address"
#string STR_ONE_OF_HELP
#language en "Select a Base address of 400, 480
or 500 Hex.
Values 0,1 or 2(default) is stored in the NVRAM Data"
#string STR_ONE_OF_TEXT1
#language en "400 Hex"
#string STR_ONE_OF_TEXT2
#language en "480 Hex"
#string STR_ONE_OF_TEXT3
#language en "500 Hex"
// end code
6). Save MyWizardDriver.uni
Build and test MyWizardDriver
DRAFT FOR REVIEW [11/08/2018 08:04:02]
48
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 5. Updating the Menu: Pop-up Box
1. Open the Visual Studio Command Prompt
2. Type build
3. Type build run
4. At the UEFI Shell prompt,type exit
5. Now at the setup front page menu, select “Device Manager”
6. Inside the Device Manager menu press the down arrow to “My Wizard Driver Sample
Formset” Press "Enter"
7. Down Arrow to “Select Base Address”
Notice the Pop up menu
8. Select “480 Hex” then press "Enter"
Observe: the “Configuration changed” message at the bottom
9. Test the “
grayoutif
” by selecting “Enable My XYZ Device” then press the “Space” bar
to toggle off or “Disabled”.
Notice the “Select Base Address” is now grayed out and not Selectable.
DRAFT FOR REVIEW [11/08/2018 08:04:02]
49
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 5. Updating the Menu: Pop-up Box
10. Press “Space” again to Enable
11. To Exit Press “Escape” then “Y” or “F10” then “Escape”
12. To Exit the “Device Manager” Page: Press “Escape”
13. Press Up Arrow to “Continue”
14. At the Shell Prompt type: "
dmpstore -all
"
15. Observe file MyWizardDriverNVDataStruc.h and the NVRAM
MWD_IfrNVData
variable.
By updating MyWizardDriverNVDataStruc.h, our data structure stored in NVRAM is
named
MWD_IfrNVData
of type
MYWIZARDDRIVER_CONFIGURATION
.
Notice that the base address byte is the next to the last byte in the data structure
MWD_IfrNVData.MyWizardDriverBaseAddress
where
02 == 400H
,
01 == 480H
, and
00 ==
500H
Notice the NVRAM Variable with the value of
480H
will have a true value of
01
.
16. Type “reset” **at the Shell prompt
17. Press “Enter” to return to the Visual Studio Command Prompt
For any build issues copy the solution files from C:\Fw\LabSolutions\LessonE.5
DRAFT FOR REVIEW [11/08/2018 08:04:02]
50
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 5. Updating the Menu: Pop-up Box
NOTE: Del Directory C:\fw\edk2\Build\NT32IA32\DEBUG_VS2010x86\IA32\MyWizardDriver
before the Build command to build the MyWizardDriver Clean.
End of Lab 5
DRAFT FOR REVIEW [11/08/2018 08:04:02]
51
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 6. Updating the Menu: Creating a String to Name a Saved Configuration
Lab 6. Updating the Menu: Creating a String to
Name a Saved Configuration
In this lab, you’ll create a string to name a saved configuration that will be stored into the
NVRAM variable space. This lab uses the VFR term “string” to prompt the user to enter a
string value. The VFR can determine the minimum and maximum number of characters of
the string length with the terms “
minsize
” and “
enable/disable switch, the VFR can use the “
maxsize
grayoutif
”. Since there is also an
” term again to allow or disallow
changes to this field.
Figure 6 : Menu with a string item
1. Update the MyWizardDriver.vfr file
2. Add the following code to the location at approx. line 77 and before the “
resetbutton
”
item (as shown below):
DRAFT FOR REVIEW [11/08/2018 08:04:02]
52
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 6. Updating the Menu: Creating a String to Name a Saved Configuration
//
// Define a string (EFI_IFR_STRING) to name the configuration in the
// NVRAM variable
//
grayoutif
string
ideqval MWD_IfrNVData.MyWizardDriverChooseToEnable == 0x0;
varid
= MWD_IfrNVData.MyWizardDriverStringData,
prompt
= STRING_TOKEN(STR_MY_STRING_PROMPT),
help
= STRING_TOKEN(STR_MY_STRING_HELP),
minsize
= 3,
maxsize
= 20,
endstring;
endif;
3. Save MyWizardDriver.vfr
4. Update MyWizardDriver.uni
5. Add the following code to the bottom of the file:
#string STR_MY_STRING_PROMPT
#language en "Name of Configuration"
#string STR_MY_STRING_HELP
#language en "Enter a name for this configurati
on. This string can is 3 to 20 characters"
DRAFT FOR REVIEW [11/08/2018 08:04:02]
53
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 6. Updating the Menu: Creating a String to Name a Saved Configuration
6). Save MyWizardDriver.uni
Build and test MyWizardDriver
1. Open the Visual Studio Command Prompt
2. Type build
3. Type build run
4. At the UEFI Shell prompt,type exit
5. Now at the setup front page menu, select “Device Manager”
6. Inside the Device Manager menu press the down arrow to “My Wizard Driver Sample
Formset” Press "Enter"
7. Select “Name of Configuration” then Press “Enter”
Notice the string text pop up menu gets displayed.
8. Test the “
minsize
” by only typing your choice of a two character string. Then Press
“Enter”
Notice the an error message validating that you need to enter at least three or more
characters.
DRAFT FOR REVIEW [11/08/2018 08:04:02]
54
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 6. Updating the Menu: Creating a String to Name a Saved Configuration
9. Press “Enter” to clear the message
10. Press “Enter” again to re-enter pop up menu
11. Test by typing more than “
maxsize
” of 20 characters** Then Press “Enter” .
Notice** that the Browser only allows the maximum number of 20 characters to be
entered with a forced stop. There is no error message but no more characters are
allowed to be typed into the pop up menu.
12. Press “Enter”
Notice that the “Configuration changed” message is displayed
DRAFT FOR REVIEW [11/08/2018 08:04:02]
55
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 6. Updating the Menu: Creating a String to Name a Saved Configuration
13. Test the
grayoutif
by selecting “Enable My XYZ Device”
14. Press the “Spacebar” to toggle off/disable. Then Press the “Spacebar” again to Enable.
Notice that the “Select Base Address” and “Name of Configruation” fields are now
grayed out and not selectable
15. Press “F10” to save.
16. Press “Escape” to exit
17. Press “Escape” to exit the “Device Manager”
18. Select “Continue” and then Press “Enter”
19. At the Shell Prompt, type
Notice the unicode string “
dmpstore -all
12345678901234567890
” (or the 20 character value you typed)
is now stored because you entered those characters in the HII form menu. This is
because the file
WizardDriverNVDataStruc.h
DRAFT FOR REVIEW [11/08/2018 08:04:02]
has the data structure stored in NVRAM
56
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 6. Updating the Menu: Creating a String to Name a Saved Configuration
with the GUID define name
MWD_IfrNVData
of type
MYWIZARDDRIVER_CONFIGURATION
.
Notice that string data is the first 20 bytes in the data structure
MWD_IfrNVData.MyWizardDriverStringData
.
20. Type “reset” and then “Enter" at the Shell prompt to return to the Visual Studio
Command Prompt
For any build issues copy the solution files from C:\Fw\LabSolutions\LessonE.6
NOTE: Del Directory C:\fw\edk2\Build\NT32IA32\DEBUG_VS2010x86\IA32\MyWizardDriver
before the Build command to build the MyWizardDriver Clean.
End of Lab 6
DRAFT FOR REVIEW [11/08/2018 08:04:02]
57
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 7. Updating the Menu: Numeric Entry
Lab 7. Updating the Menu: Numeric Entry
In this lab, you’ll learn how to add a numeric entry to your driver menu. This lab uses the
VFR term “
numeric
” that prompts the user to enter a free-form numeric value. The VFR
determines the minimum and maximum values with the terms “
minimum
Since there is also an enable/disable switch, the VFR uses the “
” and “
suppressif
maximum
”.
” term to display
or hide this field when disabled. Also this field displays as decimal (default) or hexadecimal
with the “
flags
” switch.
Figure 7 : Menu with Numeric item entry
1. Update the MyWizardDriver.vfr file
2. Add the following code in the location shown below at approx. Line 90 and before the
“
resetbutton
” item:
DRAFT FOR REVIEW [11/08/2018 08:04:02]
58
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 7. Updating the Menu: Numeric Entry
//
// Define a numeric free form menu item
//
suppressif
ideqval MWD_IfrNVData.MyWizardDriverChooseToEnable == 0x0;
numeric varid
= MWD_IfrNVData.MyWizardDriverHexData,
prompt
= STRING_TOKEN(STR_DATA_HEX_PROMPT),
help
= STRING_TOKEN(STR_NUMERIC_HELP),
flags
= DISPLAY_UINT_HEX ,
// Display in HEX format (if not specifie
d, default is in decimal format)
minimum = 0,
3. Save MyWizardDriver.vfr
4. Update the MyWizardDriver.uni file
5. Add the following code to the bottom of the file:
#string STR_DATA_HEX_PROMPT
#language en "Enter ZY Base (Hex)"
#string STR_NUMERIC_HELP
#language en "This is the help for entering a B
ase address in Hex. The valid range in this case is from 0 to 250."
6). Save MyWizardDriver.uni
Build and test MyWizardDriver
1. Open the Visual Studio Command Prompt
2. Type build
3. Type build run
4. At the UEFI Shell prompt,type exit
DRAFT FOR REVIEW [11/08/2018 08:04:02]
59
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 7. Updating the Menu: Numeric Entry
5. Now at the setup front page menu, select “Device Manager”
6. Inside the Device Manager menu press the down arrow to “My Wizard Driver Sample
Formset” Press "Enter"
Notice the value for “Enter ZY Base(Hex)” is
VFR field “
default = 0x22
022
. Hex is the default because of the
”
7. Select “Enter ZY Base(Hex)” and then Press “Enter”
8. Test by typing a “
M
” character
Notice that only Numeric characters are allowed and also only values
00
to
0FA
Hex.
When values outside the range or non-numeric characters are entered the red “!!” sting
is displayed at the bottom of the menu.
The string “!!” is part of the Browser engine :
DRAFT FOR REVIEW [11/08/2018 08:04:02]
60
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 7. Updating the Menu: Numeric Entry
MdeModulePkg\Universal\SetupBrowserDxe\SetupBrowserStr.uni
#string INPUT_ERROR_MESSAGE #language en-US "!!"
9. Press “Enter” again
10. Test by typing a value of ‘
99
’ Hex and then Press “Enter”
Notice that the “Configuration changed” message is displayed.
11. Test the “
surpressif
” by pressing the “spacebar” to “Enable My XYZ Device” then
press the “Space” bar to toggle off or “Disabled”.
Notice the “Select Base Address” and “Name of Configuration” fields are now grayed
out and not selectable and the “Enter ZY Base(Hex)” does not appear at all.
DRAFT FOR REVIEW [11/08/2018 08:04:02]
61
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 7. Updating the Menu: Numeric Entry
12. Press “Space bar” again to “Enable My XYZ Device” and the“Enter ZY Base(Hex)” is
displayed again
13. Press “F10” to save, then “Escape” to exit
14. Press “Escape” to exit the “Device Manager”
15. Select “Continue” and then Press "Enter”
16. At the Shell Prompt, type
Notice by
named
dmpstore –all
modifyingMyWizardDriverNVDataStruc.h
MWD_IfrNVData
of type
our data structure stored in NVRAM is
MYWIZARDDRIVER_CONFIGURATION
.
17 Type “reset” at the Shell prompt and then Press “Enter” to return to the Visual
Studio Command Prompt
For any build issues copy the solution files from C:\Fw\LabSolutions\LessonE.7
NOTE: Del Directory C:\fw\edk2\Build\NT32IA32\DEBUG_VS2010x86\IA32\MyWizardDriver
before the Build command to build the MyWizardDriver Clean.
DRAFT FOR REVIEW [11/08/2018 08:04:02]
62
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 7. Updating the Menu: Numeric Entry
End of Lab 7
DRAFT FOR REVIEW [11/08/2018 08:04:02]
63
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 8. Updating your Driver for Interactive Call Backs
Lab 8. Updating your Driver for Interactive Call
Backs
In this lab, you’ll update your driver for interactive call backs. Call backs are a way to
communicate changes the user is making in “real time” where your driver needs to intervene
as the changes are made and before the user exits the current menu being displayed. These
would be exception cases that the driver could interrupt the normal browser engine process.
To add call backs, the file
HiiConfigAccess.c
MyWizardDriverHiiConfigAccessCallback
have a flag for
INTERACTIVE
of your driver will be updated in the function
. This function is called whenever any VFR items
set. So far, the previous labs did not have any call back items.
We can see this because there was a “Debug” call made in the
MyWizardDriverHiiConfigAccessCallback
HiiConfigAccess.c
function that never gets called:
(line 331)
DEBUG ((DEBUG_INFO, "\n:: START Call back ,Question ID=0x%08x Type=0x%04x Action=0x%04
x", QuestionId, Type, Action));
Lab 8a. Add the Case statements to the Call back routine
1. Update the HiiConfigAccess.c file
2. Add the following code before
return status
; to include a “
case
” statement in the call
back routine for the “action” passed. | Add the following code at approx. line 343 before:
return status;
DRAFT FOR REVIEW [11/08/2018 08:04:02]
64
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 8. Updating your Driver for Interactive Call Backs
//Begin Code
switch (Action) { // Start switch and passed param Action
case EFI_BROWSER_ACTION_FORM_OPEN:
// 3
{
}
break;
case EFI_BROWSER_ACTION_FORM_CLOSE: // 4
{
}
break;
case EFI_BROWSER_ACTION_RETRIEVE: // 2
{
}
break;
//End Code
DRAFT FOR REVIEW [11/08/2018 08:04:02]
65
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 8. Updating your Driver for Interactive Call Backs
3. Save HiiConfigAccess.c
Build and test MyWizardDriver
1. Open the Visual Studio Command Prompt
2. Type build
3. Type build run
4. At the UEFI Shell prompt,type exit
5. Now at the setup front page menu, select “Device Manager”
6. Inside the Device Manager menu press the down arrow to “My Wizard Driver Sample
DRAFT FOR REVIEW [11/08/2018 08:04:02]
66
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 8. Updating your Driver for Interactive Call Backs
Formset” Press "Enter"
7. Notice the debug messages in the Visual Studio Command Prompt – build run Window
(No Debug messages for Call back)
...
8. Press “Escape” and another "Escape" to exit the “Device Manager”
9. Select “Continue” and then Press "Enter”
10. Type “reset” at the Shell prompt and then Press “Enter” to return to the Visual Studio
Command Prompt
Lab 8b. Update the Menu for Interactive items
1. Update the MyWizardDriver.vfr file
2. Now, you’ll add the flag characteristic
keyword
INTERACTIVE
and
questionid
INTERACTIVE
to the string item’s flags by using
. Add the following code in the location shown
below:
Approx. line 83 and line 86
questionid = 0x1001,
flags = INTERACTIVE,
3. Include the numeric item by adding the following code in the location shown below,
Approx. line 97 and line 100
questionid = 0x1111,
| INTERACTIVE ,
DRAFT FOR REVIEW [11/08/2018 08:04:02]
67
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 8. Updating your Driver for Interactive Call Backs
4. Save MyWizardDriver.vfr
Build and test MyWizardDriver
1. Open the Visual Studio Command Prompt
2. Type build
3. Type build run
4. At the UEFI Shell prompt,type exit
5. Now at the setup front page menu, select “Device Manager”
6. Inside the Device Manager menu press the down arrow to “My Wizard Driver Sample
Formset” Press "Enter"
7. Take a moment and review the Visual Studio build run command prompt window
8. In the emulation window, click on “Name of Configuration” and “Enter ZY Base(Hex)”
9. Notice the following in the Visual Studio Command Prompt window:
Every time the browser does anything with the interactive labeled fields there is a call
made to your driver’s call back function. We can determine which item by the
quetionid
and what action by the Action passed to your call back function. Your call
back function can then add code to special case when these transitions occur.
Entering Form
Changing a Value for Question ID 0x1111
Changing a Value for Question ID 0x1001
DRAFT FOR REVIEW [11/08/2018 08:04:02]
68
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 8. Updating your Driver for Interactive Call Backs
10. Press “Escape” and another "Escape" to exit the “Device Manager”
11. Select “Continue” and then Press "Enter”
12. Type “reset” at the Shell prompt and then Press “Enter” to return to the Visual Studio
Command Prompt
For any build issues copy the solution files from C:\Fw\LabSolutions\LessonE.8
NOTE: Del Directory C:\fw\edk2\Build\NT32IA32\DEBUG_VS2010x86\IA32\MyWizardDriver
before the Build command to build the MyWizardDriver Clean.
End of Lab 8
DRAFT FOR REVIEW [11/08/2018 08:04:02]
69
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 9. Add code to your driver when Call Back events occur for Interactive Items
Lab 9. Add code to your driver when Call Back
events occur for Interactive Items
In this lab, you’ll update your driver to print debug statements when the HII browser engine
calls back into your call back function. Every time the browser does anything with the
interactive labeled fields there is a call made to your driver’s call back function. We can
determine the item by the
quetionid
and what action based on the action passed to your
call back function. Your call back function can then add code to special case when these
transitions occur.
For this lab we will simply add Debug print statements. However, the use of adding call
backs to a driver’s HII functions adds the capability of providing more manageability and
flexibility for the interactions between the user, the browser engine, and your driver code. In
a real driver firmware situation, it may be desired to implement more complex features and
functionality based upon an item changing.
1. Update the HiiConfigAccess.c file
2. Comment out the DEBUG statement with “
MyWizardDriverHiiConfigAccessCallback
//
” in the
call back function approx. line 330:
//
3. Add a switch case statement of the question ID’s to the “Action” switch case of
EFI_BROWSER_ACTION_CHANGING
in the call back function by adding a nested switch case
code (as shown below at approx. line 372 )
DRAFT FOR REVIEW [11/08/2018 08:04:02]
70
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 9. Add code to your driver when Call Back events occur for Interactive Items
switch (QuestionId) {
case 0x1111:
DEBUG ((DEBUG_INFO, "\n:: START Call back- Changing ,Question ID
=0x%08x Type=0x%04x Action=0x%04x", QuestionId, Type, Action));
break;
case 0x1001:
DEBUG ((DEBUG_INFO, "\n:: START Call back- Changing ,Question ID
=0x%08x Type=0x%04x Action=0x%04x", QuestionId, Type, Action));
break;
default:
Status = EFI_UNSUPPORTED;
break;
}
4. Add another nested switch case statement of the question ID’s to the “Action” switch
case of EFI_BROWSER_ACTION_CHANGED in the call back function (as show below
at approx. line 388):
switch (QuestionId) {
case 0x1111:
DEBUG ((DEBUG_INFO, "\n:: START Call back- Changed ,Question ID=0
x%08x Type=0x%04x Action=0x%04x", QuestionId, Type, Action));
break;
case 0x1001:
DEBUG ((DEBUG_INFO, "\n:: START Call back- Changed ,Question ID=0
x%08x Type=0x%04x Action=0x%04x", QuestionId, Type, Action));
break;
default:
Status = EFI_UNSUPPORTED;
break;
}
DRAFT FOR REVIEW [11/08/2018 08:04:02]
71
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 9. Add code to your driver when Call Back events occur for Interactive Items
1. Save MyWizardDriver.c
Build and test MyWizardDriver
1. Open the Visual Studio Command Prompt
2. Type build
3. Type build run
4. At the UEFI Shell prompt,type exit
5. Now at the setup front page menu, select “Device Manager”
6. Inside the Device Manager menu press the down arrow to “My Wizard Driver Sample
Formset” Press "Enter"
7. Observe the Visual Studio Command Prompt – build run Window
Test: changing the “Name of Configuration” and the “Enter ZY Base(Hex)” fields while
observing the Visual Studio Command Prompt – build run Window
8. Switch back to Visual Studio and notice the changes that you made.
Notice: when changing the “Name of Configuration” field
Notice: when changing the “Enter ZY Base(Hex)” field
DRAFT FOR REVIEW [11/08/2018 08:04:02]
72
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 9. Add code to your driver when Call Back events occur for Interactive Items
Notice: when Pressing “F10”
9. Press “Escape” and another "Escape" to exit the “Device Manager”
10. Select “Continue” and then Press "Enter”
11. Type “reset” at the Shell prompt and then Press “Enter” to return to the Visual Studio
Command Prompt
For any build issues copy the solution files from C:\Fw\LabSolutions\LessonE.9
NOTE: Del Directory C:\fw\edk2\Build\NT32IA32\DEBUG_VS2010x86\IA32\MyWizardDriver
before the Build command to build the MyWizardDriver Clean.
End of Lab 9
DRAFT FOR REVIEW [11/08/2018 08:04:02]
73
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 10. Adding an Additional Form Page
Lab 10. Adding an Additional Form Page
In this lab, you’ll learn how to add another form page to your My Wizard Driver menu by
using the “
goto
” VFR term along with the “
Additionally, use “
surpressif
” or “
form
grayoutif
” and “
formid
” VFR statements.
” to conditionally allow the user to enter your
additional forms.
In addition, this lab will show how the “time” and “date” VFR terms are used within the VFR
language to special case how the browser engine checks the time instead of your driver
manually checking (e.g. leap year).
Figure 10: Second setup page
1. Update the MyWizardDriverNVDataStruc.h file
2. Add the following date and time fields to the configuration
typedef
(to to the location
shown below):
EFI_HII_TIME
Time;
EFI_HII_DATE
Date;
DRAFT FOR REVIEW [11/08/2018 08:04:02]
74
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 10. Adding an Additional Form Page
3. Save MyWizardDriverNVDataStruc.h
4. Update the MyWizardDriver.uni file
5. Add the following code to the end of the file to update the second page’s string:
#string STR_FORM2_TITLE
#language en "MyWizardDriver Second Setup Page"
#string STR_DATE_PROMPT
#language en "System Date"
#string STR_DATE_HELP
#language en "This is the help for the Date (mo
nth/day/year). (Error checking will be done against month/day/year combinations that a
re not supported.)"
#string STR_TIME_PROMPT
#language en "System Time"
#string STR_TIME_HELP
#language en "This is the help for the Time (ho
ur/minute/second)."
#string STR_ERROR_POPUP
#language en "You typed in the wrong value!"
#string STR_GOTO_FORM1
#language en "Enter Page 1"
#string STR_GOTO_FORM2
#language en "Enter Page 2"
#string STR_GOTO_HELP
#language en "This is my goto help"
#string STR_MY_DATE_PROMPT
#language en "My System Date"
#string STR_MY_TIME_PROMPT
#language en "My System Time"
6). Save MyWizardDriver.uni
7). Update the MyWizardDriver.vfr file
8). Add the “
goto
” VFR item to allow browser to ender another form by adding the
following code before the "
grayoutif
endform
” at approx. line 114
ideqval MWD_IfrNVData.MyWizardDriverChooseToEnable == 0x0;
goto 2,
prompt = STRING_TOKEN(STR_GOTO_FORM2), //SecondSetupPage
help
= STRING_TOKEN(STR_GOTO_HELP);
endif;
DRAFT FOR REVIEW [11/08/2018 08:04:02]
75
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 10. Adding an Additional Form Page
9). Add the following code between “
endform
” at approx. line 120 and “
endformset
” (the
code continues for few pages in this lab guide):
// Begin code
form formid = 2,
// SecondSetupPage,
title = STRING_TOKEN(STR_FORM2_TITLE);
grayoutif TRUE; // DATE is the date of the Windows Host so can not change it.;
date
year varid
= Date.Year, // Note that it is a member of NULL,
//so the RTC will be the system resource to retrieve and save from
prompt
= STRING_TOKEN(STR_DATE_PROMPT),
help
= STRING_TOKEN(STR_DATE_HELP),
minimum
= 1998,
maximum
= 2099,
step
= 1,
default
= 2010,
month varid = Date.Month, // Note that it is a member of NULL,
//so the RTC will be the system resource to retrieve and save from
prompt
= STRING_TOKEN(STR_DATE_PROMPT),
help
= STRING_TOKEN(STR_DATE_HELP),
minimum
= 1,
maximum
= 12,
step
= 1,
default
= 1,
day varid
= Date.Day, // Note that it is a member of NULL,
//so the RTC will be the system resource to retrieve and save from
prompt
= STRING_TOKEN(STR_DATE_PROMPT),
help
= STRING_TOKEN(STR_DATE_HELP),
minimum
= 1,
maximum
= 31,
step
= 0x1,
default
= 1,
enddate;
endif;
//grayoutif TRUE DATE
grayoutif TRUE;
time
// TIME – WINDOWS TIME
hour varid
= Time.Hour, // Note that it is a member of NULL,
DRAFT FOR REVIEW [11/08/2018 08:04:02]
76
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 10. Adding an Additional Form Page
//so the RTC will be the system resource to retrieve and save from
prompt
= STRING_TOKEN(STR_TIME_PROMPT),
help
= STRING_TOKEN(STR_TIME_HELP),
minimum
= 0,
maximum
= 23,
step
= 1,
default
= 0,
minute varid
= Time.Minute, // Note that it is a member of NULL,
//so the RTC will be the system resource to retrieve and save from
prompt
= STRING_TOKEN(STR_TIME_PROMPT),
help
= STRING_TOKEN(STR_TIME_HELP),
minimum
= 0,
maximum
= 59,
step
= 1,
default
= 0,
second varid
= Time.Second, // Note that it is a member of NULL,
//so the RTC will be the system resource to retrieve and save from
prompt
= STRING_TOKEN(STR_TIME_PROMPT),
help
= STRING_TOKEN(STR_TIME_HELP),
minimum
= 0,
maximum
= 59,
step
= 1,
default
= 0,
endtime;
endif; //grayoutif TRUE
TIME
date // My Wizard Driver Date
varid = MWD_IfrNVData.Date ,
prompt = STRING_TOKEN(STR_MY_DATE_PROMPT),
help = STRING_TOKEN(STR_DATE_HELP),
flags = STORAGE_NORMAL,
default = 2013/01/01,
enddate;
time // My Wizard Driver Time
name
= MyTimeMWD,
varid
= MWD_IfrNVData.Time,
prompt
= STRING_TOKEN(STR_MY_TIME_PROMPT),
help
= STRING_TOKEN(STR_TIME_HELP),
flags
= STORAGE_NORMAL ,
default = 15:33:33,
endtime;
goto 1,
prompt = STRING_TOKEN(STR_GOTO_FORM1), //MainSetupPage
// this too has no end-op and basically it's a jump to a form ONLY
help
= STRING_TOKEN(STR_GOTO_HELP);
endform;
DRAFT FOR REVIEW [11/08/2018 08:04:02]
77
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 10. Adding an Additional Form Page
// End code
10). Save MyWizardDriver.vfr
Build and test MyWizardDriver
1. Open the Visual Studio Command Prompt
2. Type build
3. Type build run
4. At the UEFI Shell prompt,type exit
5. Now at the setup front page menu, select “Device Manager”
6. Inside the Device Manager menu press the down arrow to “My Wizard Driver Sample
Formset” Press "Enter"
Notice the “Enter Page 2” option. Without
goto
in the
MyWizardDriver.vfr
file, you
wouldn’t be able to access page two.
7. Select “Enter Page 2” and then Press “Enter”
Notice how the System Date and Time cannot be modified to any other date/time and is
grayed out:
DRAFT FOR REVIEW [11/08/2018 08:04:02]
78
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 10. Adding an Additional Form Page
8. Test by trying to enter the date 02/30/2013, then try a valid leap year date: 02/29/2012.
9. Press “Down Arrow” to return to Page 1
10. Test the “
grayoutif”
by going to “Enable My XYZ Device”
11. Press the “Spacebar” to toggle off/disable
Notice the “Select Base Address” , “Name of Configuration” and the “Enter Page 2”
fields are now grayed out and not selectable
12. Press “Space bar” again to Enable
13. Press “F10” then “Escape” to save and exit
14. Press “Escape” to exit “Device Manager”
15. Select “Continue” and then Press "Enter”
16. Type “reset”
DRAFT FOR REVIEW [11/08/2018 08:04:02]
79
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 10. Adding an Additional Form Page
at the Shell prompt and then Press “Enter” to return to the Visual Studio Command
Prompt
For any build issues copy the solution files from C:\Fw\LabSolutions\LessonE.10
NOTE: Del Directory C:\fw\edk2\Build\NT32IA32\DEBUG_VS2010x86\IA32\MyWizardDriver
before the Build command to build the MyWizardDriver Clean.
End of Lab 10
DRAFT FOR REVIEW [11/08/2018 08:04:02]
80
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 11. Adding Communication from Driver to Console through HII
Lab 11. Adding Communication from Driver to
Console through HII
In this lab, you’ll add communication from the driver to the console through HII. More
specifically, you’ll add code to retrieve a string from the HII database and print the string to
the console. Then, you’ll add the string in French, change the language, and test to ensure
the correct language is displayed. The reason the driver should avoid direct string text to the
console without the HII support is because there is no localization for text string inside the
driver’s source code. By using the HII database the strings are tokenized making localization
easier.
Examine the MdeModulePkg.Chm for HII
1. Use the .Chm reader and open the MdeModulePkg.Chm. For HII database library
functions are in the MdeModulePkg .Chm file. Search on HiiLib.h functions
2. Select the Index tab
3. Type: HiiLib.h
Note: Notice the list of Hii function calls available. To get Strings the
HiiGetString
function can be used.
Add changes to your Driver
DRAFT FOR REVIEW [11/08/2018 08:04:02]
81
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 11. Adding Communication from Driver to Console through HII
1. Update the C:\Fw\edk2\Nt32pkg\Nt32pkg.fdf file
2. Make your driver stand alone again. Remove (or comment out) the include statement in
the Nt32pkg.fdf file:
#INF MyWizardDriver/MyWizardDriver.inf
3. Save Nt32pkg.fdf
4. Update the MyWizardDriver.uni file
5. Add the following code to the top of the file at approx. line 14 as shown:
#langdef fr-FR "Francais"
6. Add the following code to the end of the file:
#string STR_LANGUAGE_TEST_STRING
#language en "Laurie's Test String"
#language fr-FR "Chaîne de test de Laurie"
7). Save MyWizardDriver.uni
8). Update the MyWizardDriver.c file
9). Add the following local variable for
“
Status = EFI_SUCCESS;
StringPtr
after “
BOOLEAN ActionFlag;
” and before
”(as shown below):
EFI_STRING StringPtr;
10). Add the following code after “
FreePool (ConfigRequestHdr);
” (as shown below) to edit
the driver’s entry point with a debug and print statement by making a call to the
HiiGetString
for the token to print (at approx line 364):
DRAFT FOR REVIEW [11/08/2018 08:04:02]
82
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 11. Adding Communication from Driver to Console through HII
StringPtr
= HiiGetString (HiiHandle[0], STRING_TOKEN (STR_LANGUAGE_TEST_STRING)
, NULL);
DEBUG ((EFI_D_INFO,"[MyWizardDriver-Entrypoint] My String was: %s\n", StringPtr) );
Print(L"%s\n", StringPtr );
11). Save the MyWizardDriver.c
Build and test Driver
1. Open the Visual Studio Command Prompt
2. Type build
3. Type build run
4. At the UEFI Shell prompt,type fs0:
5. Type Load MyWizardDriver.efi and then Press “Enter”
Notice that the string’s English version is displayed:
6. Type Reset and then Press “Enter”
7. Type "build run" and then Press “Enter”
8. Type "exit" at the shell prompt
9. Select Language and then Press “Enter”
DRAFT FOR REVIEW [11/08/2018 08:04:02]
83
UEFI Driver HII Win Lab Guide[DRAFT]
Lab 11. Adding Communication from Driver to Console through HII
10. Select “Français” and then Press “Enter”
11. Select “Continuer” and then Press “Enter”
12. At the Shell Prompt, type Fs0:
13. Type load MyWizardDriver.efi
14. Type “reset” and then Press “Enter” to return to the Visual Studio Command Prompt
For any build issues copy the solution files from C:\Fw\LabSolutions\LessonE.11
NOTE: Del Directory C:\fw\edk2\Build\NT32IA32\DEBUG_VS2010x86\IA32\MyWizardDriver
before the Build command to build the MyWizardDriver Clean.
Make sure you update Nt32Pkg.fdf.
End Lab 11
DRAFT FOR REVIEW [11/08/2018 08:04:02]
84
UEFI Driver HII Win Lab Guide[DRAFT]
Lab Setup
LAB SETUP WINDOWS
1. Download the UEFI Training Materials .zip (accept any security notifications)
2. Click “Open” and Unzip the file to C: which will take a few minutes
Note: It is highly important that you unzip the file correctly to this location because all
the file locations in this training guide follow that format.
C:\Fw\Presentations
- separate zip file
C:\Fw \Edk2 – Open source tianocore.org EDK II
C:\Fw \DriverWizard – Install .MSI
C:\Fw \LabSampleCode
- Solutions for Labs
C:\Fw \Documentation - .chm files and examples
C:\Fw\Nasm – For Assembly compiler
3. Copy the C:\fw\NASM directory to C:
Pin Visual Studio Command Prompt for Windows
Pin a Visual Studio Command Prompt for Windows 10
It will look similar to this “Visual Studio Command Prompt (201n)” in the Task bar
Note: this is the prompt that will be used to build the EDK II Labs
Preparing for the BUILD Command
Note: You’ll need to repeat this step each time you exit the Visual Studio Command Prompt
window. It is recommended that you keep your command prompt open during the training
Labs.
DRAFT FOR REVIEW [11/08/2018 08:04:02]
85
UEFI Driver HII Win Lab Guide[DRAFT]
Lab Setup
1. Open Visual Studio Command Prompt
2. Type
$ CD c:\fw\edk2
3. Type
$ Edksetup
and then Press “Enter”
and then Press “Enter”
Note: If you see “!!! WARNING !!!...”, don’t be alarmed. The "No CYGWIN..." can be
ignored at this time, BUT make sure "NASM" is found and the
NASM_PREFIX
is set to
C:\nasm\
Configuring Build Tools
Note: You only need to edit Target.txt and/or Tools_Def.txt once after the first edksetup
command after downloading the Training materials .zip file.
1. Open Notepad or other text editor that supports UNICODE
2. Open C:/fw/edk2/Conf/Target.txt
3. Use the Microsoft Windows and Visual Studio Matrix and then update
TOOL_CHAIN_TAG
to match your version of Visual Studio
DRAFT FOR REVIEW [11/08/2018 08:04:02]
86
UEFI Driver HII Win Lab Guide[DRAFT]
Lab Setup
4. Modify TOOL_CHAIN_TAG to match your version of Visual Studio.
Example:
for Windows 10 64 bit OS and Visual Studio 2013 modify the following in Target.txt
From:
TOOL_CHAIN_TAG = MYTOOLS
to:
TOOL_CHAIN_TAG = VS2013x86
OPTIONAL: Update the
MAX_CONCURRENT_THREAD_NUMBER
By the number of processors on
your laptop + 1. Example: most have Intel® Dual Core with Hyper threading which
means
2 procs + 2 HT + 1 = 5
.
5. Save and close the text file C:/fw/edk2/conf/target.txt
End of Lab Setup for Windows
DRAFT FOR REVIEW [11/08/2018 08:04:02]
87
UEFI Driver HII Win Lab Guide[DRAFT]
Microsoft Windows 10 – Visual Studio command prompt
MICROSOFT WINDOWS 10 – VISUAL
STUDIO COMMAND PROMPT
The following steps can be used to Pin the Microsoft Windows 10 – Visual Studio command
prompt (201n) to the Task bar at the bottom(default)
1. Open Microsoft Visual Studio 2013 command prompt
(NOTE: VS 2013 is used in the following examples but VS 2010, VS 2015 and VS 2017
will be similar)
2. Using the Start menu in Windows 10, Left-click on the “Windows Key” Lower Left
3. Scroll down from the scroll bar on the right until “Visual Studio 2013” (or your version
of VS 201n)
DRAFT FOR REVIEW [11/08/2018 08:04:02]
88
UEFI Driver HII Win Lab Guide[DRAFT]
Microsoft Windows 10 – Visual Studio command prompt
DRAFT FOR REVIEW [11/08/2018 08:04:02]
89
UEFI Driver HII Win Lab Guide[DRAFT]
Microsoft Windows 10 – Visual Studio command prompt
4. Left Click “Visual Studio 201n”
5. Left Click “Visual Studio Tools”
DRAFT FOR REVIEW [11/08/2018 08:04:02]
90
UEFI Driver HII Win Lab Guide[DRAFT]
Microsoft Windows 10 – Visual Studio command prompt
Another window will open
6. Right Click on “Developer Command Prompt for VS201n” NOTE: Make sure you are
selecting the correct Command prompt for Visual Studio. For VS2013 it is: “Developer
Command Prompt for VS2013”
DRAFT FOR REVIEW [11/08/2018 08:04:02]
91
UEFI Driver HII Win Lab Guide[DRAFT]
Microsoft Windows 10 – Visual Studio command prompt
7. Left Click on “Pin to taskbar”
8. "Visual Studio Command Prompt" will now be in the task bar.
end of Pin Visual Studio Command Prompt to the Task bar
DRAFT FOR REVIEW [11/08/2018 08:04:02]
92
UEFI Driver HII Win Lab Guide[DRAFT]
Reference
REFERENCE
DRAFT FOR REVIEW [11/08/2018 08:04:02]
93
UEFI Driver HII Win Lab Guide[DRAFT]
Microsoft Windows and Visual Studio Matrix
MICROSOFT WINDOWS AND VISUAL
STUDIO MATRIX
Files C:/fw/edk2/conf/target.txt and tools_def.txt (Return to Configuring Build Tools)
Visual
Studio
Version
Win7,Win8 & Win10 x64 OS
VS2005
8.0
target.txt TOOL_CHAIN_TAG = VS2005x86Requires
WinDDK Link16**
VS2008
9.0
target.txt TOOL_CHAIN_TAG = VS2008x86
VS2010
10.0
target.txt TOOL_CHAIN_TAG = VS2010x86
VS2012
11.0
target.txt TOOL_CHAIN_TAG = VS2012x86
VS2013
12.0
target.txt TOOL_CHAIN_TAG = VS2013x86
VS2015
14.0
target.txt TOOL_CHAIN_TAG = VS2015x86
VS2017
15.0
target.txt TOOL_CHAIN_TAG = VS2017x86
DRAFT FOR REVIEW [11/08/2018 08:04:02]
94
UEFI Driver HII Win Lab Guide[DRAFT]
Glossary of UEFI Terms and Acronyms
Glossary of UEFI Terms and Acronyms
https://github.com/tianocore/tianocore.github.io/wiki/Acronyms-and-Glossary
DRAFT FOR REVIEW [11/08/2018 08:04:02]
95
UEFI Driver HII Win Lab Guide[DRAFT]
Helpful Links
Helpful Links
UEFI Forum
http://www.uefi.org
UEFI Open Source
http://www.tianocore.org
EFI Developer Kit
(EDK II)
http://tianocore.github.io/edk2.html
EDK II Documents
http://www.tianocore.org/docs/
UEFI Shell
Documents
https://github.com/tianocore/tianocore.github.io/wiki/ShellPkg
DRAFT FOR REVIEW [11/08/2018 08:04:02]
96
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Author : laurie0131 Create Date : 2018:11:08 20:04:08+00:00 Producer : calibre 2.57.1 [http://calibre-ebook.com] Description : Lab and Reference Guide for Porting UEFI Driver to include HII, Assumes Windows 10 Title : UEFI_Driver_HII_Win_Lab_Guide Subject : Publisher : GitBook Creator : laurie0131 Language : en Metadata Date : 2018:11:08 20:04:08.996029+00:00 Timestamp : 2018:11:08 20:04:05.081696+00:00 Page Count : 96EXIF Metadata provided by EXIF.tools