PetaLinux Tools Ation: Reference Guide (UG1144) Ug1144
User Manual:
Open the PDF directly: View PDF
Page Count: 127 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- PetaLinux Tools Documentation: Reference Guide
- Revision History
- Table of Contents
- Ch. 1: Overview
- Ch. 2: Setting up your Environment
- Ch. 3: Creating a Project
- Ch. 4: Configuring and Building
- Ch. 5: Booting and Packaging
- Ch. 6: Customizing the Project
- Ch. 7: Customizing the Rootfs
- Including Prebuilt Libraries
- Including Prebuilt Applications
- Including Prebuilt Modules
- Creating and Adding Custom Applications
- Creating and Adding Custom Modules
- Building User Applications
- Testing User Application
- Building User Modules
- PetaLinux Auto Login
- Application Auto Run at Startup
- Adding Layers
- Adding an Existing Recipe into Rootfs
- Adding a Package Group
- Ch. 8: Debugging
- Ch. 9: Advanced Configurations
- PetaLinux Menuconfig System
- Settings
- Subsystem AUTO Hardware Settings
- System Processor
- Memory Settings
- Serial Settings
- Ethernet Settings
- Flash Settings
- SD/SDIO Settings
- Timer Settings
- Reset GPIO Settings
- RTC Settings
- Advanced bootable images storage Settings
- Kernel Bootargs
- ATF Compilation Configuration
- PMU Firmware Configuration
- U-Boot Configuration
- Image Packaging Configuration
- Firmware Version Configuration
- Yocto Settings
- Configuring Out-of-tree Build
- Configuring Project Components
- PetaLinux Menuconfig System
- Ch. 10: Yocto Features
- Ch. 11: Technical FAQs
- Appx. A: Migration
- Appx. B: PetaLinux Project Structure
- Appx. C: Generating Boot Components
- Appx. D: QEMU Virtual Networking Modes
- Appx. E: Xilinx IP Models Supported by QEMU
- Appx. F: Xen Zynq Ultrascale+ MPSoC Example
- Appx. G: Additional Resources and Legal Notices