Ug162 Simplicity Commander Reference Guide
ug162-simplicity-commander-reference-guide
ug162-simplicity-commander-reference-guide
User Manual:
Open the PDF directly: View PDF
Page Count: 58
- Table of Contents
- 1. Introduction
- 2. File Format Overview
- 3. General Information
- 4. EFR32 Custom Tokens
- 5. Simplicity Commander Commands
- 5.1 Device Flashing Commands
- 5.2 Flash Verification Command
- 5.3 Memory Read Commands
- 5.4 Token Commands
- 5.5 Convert and Modify File Commands
- 5.5.1 Combine Two Files
- 5.5.2 Define Specific Bytes
- 5.5.3 Define Tokens
- 5.5.4 Dump File Contents
- 5.5.5 Signing an Application for Secure Boot
- 5.5.6 Signing an Application for Secure Boot Using a Hardware Security Module
- 5.5.7 Signing an Application for Secure Boot Signing using a Signature Created by a Hardware Security Module
- 5.5.8 Adding a CRC32 for Gecko Bootloader
- 5.6 EBL Commands
- 5.7 GBL Commands
- 5.7.1 GBL File Creation
- 5.7.2 GBL File Creation with Compression
- 5.7.3 Creating a GBL File for Bootloader Upgrade
- 5.7.4 Creating a GBL File for Secure Element Upgrade
- 5.7.5 Creating a Signed and Encrypted GBL Upgrade Image File from an Application
- 5.7.6 Creating a Partial Signed and Encrypted GBL Upgrade File for Use with a Hardware Security Module
- 5.7.7 Creating a Signed GBL File Using a Hardware Security Module
- 5.7.8 GBL File Parsing
- 5.7.9 GBL Key Generation
- 5.7.10 Generating a Signing Key
- 5.7.11 Generate a Signing Key Using a Hardware Security Module
- 5.8 Kit Utility Commands
- 5.9 Device Erase Commands
- 5.10 Device Lock and Protection Commands
- 5.11 Device Utility Commands
- 5.12 External SPI Flash Commands
- 5.13 Advanced Energy Monitor Measure Command
- 5.14 Serial Wire Output Read Commands
- 5.15 NVM3 Commands
- 5.16 CTUNE Commands
- 6. Software Revision History