Ultra Hoist Drawworks System 1060 6000 Flyer Ultrahoist
User Manual: UltraHoist Drawworks System 1060-6000 Flyer Resource Library
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
UltraHoist Drawworks System UH SG-1060-6000-DDW Cameron’s UltraHoist drawworks deliver efficient hoisting and lowering during drilling, tripping and handling operations. All UltraHoist drawworks are AC and gear-driven. TM The UltraHoist 1060-6000 is a fully-integrated drawworks system, designed to be able to hoist and lower defined loads during tripping and drilling modes. The UltraHoist is designed for offshore installation and is centered on maintaining personnel safety and increasing equipment service life and long-term optimal performance through component selection and system design. Main Features • L ebus grooved drum for 2” drill line – complete with kickback rollers and easily removable guards • Easily removable cable anchor • C ontrol system interfaces with the Zone Management System via the C-NET network to enable communication with other system PLC such as the anti-collision system • C ustom PLC software ensures smooth and natural operations for the driller • B uilt-in, self-diagnostic functions automatically warn for service and overhaul of main components • O nboard HPU systems for brakes and lubrications fitted with dual pumps and motors • Internal gearbox uses a keyless design to avoid stress configurations • Sound enclosure for noise reduction Safety Features • F ail-safe braking system comprised of two brake discs, one at each side of the drum, and two calipers with brake pads acting on each disc • B raking capacity of the emergency brakes equal to 200% of maximum line pull • A utomatic brake monitoring system, including brake slip detection, drum creep detection and drum response detection • Two separately fused emergency shutdown circuits • Integrated crown and floor saver provides full control of the various braking systems Technical Specifications Power rating maximum drawworks duty Maximum wire pull on 16 lines Maximum fast line pull Maximum block speed with 16 lines (at max motor working speed of 2500 rpm) Drum size (diameter x length) SI Imperial (US) 4480 kW 6000 hp 961 tonnes 1060 tons 809 k∙N 182 kips 1.06 m/sec 343 ft/min 1270 mm x 2440 mm 50” x 96” API 7K drilling equipment, DNV-OS-E101 drilling plant Any third-party approval is available upon request Design Area classification Zone 1, IIB, T3 Scope of Supply Options Drawworks skid Foundation bolts Drum and drum support Lifting spreader bar Dual brake disks and calipers Operator’s control panel Single-speed gearbox AC drives AC motors Blower skid for air cooling of AC motors HPU for lube oil system HPU for brake control system UltraHoist control system includes PLC with software as needed for safe and reliable control and monitoring of all drawworks functions Local control panel (for cut-and-slip operations) Block reset sensors Floor/crown saver sensors Sound enclosure User manuals/documentation 1.8 Hook Load and Speed Chart 1.6 * Calculations based on layer 4 ** Maximum speed limited to 3000 rpm at layer 2 Block speed (m/sec) 1.4 1.2 1 0.8 0.6 0.4 0.2 0 0 200 400 600 800 1000 1200 Hook load (tons) 4601 Westway Park Blvd. Houston, TX 77041 USA Tel 1 713 939 2211 Andøyfaret 3 N-4623 Kristiansand S. Norway Tel 47 380 00 570 © 2013 Cameron | UltraHoist is a trademark of Cameron. | 07/13 AD00586DRL drilling@c-a-m.com | www.c-a-m.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27 Create Date : 2013:07:16 12:22:38-05:00 Metadata Date : 2013:07:16 12:22:39-05:00 Modify Date : 2013:07:16 12:22:39-05:00 Creator Tool : Adobe InDesign CS6 (Macintosh) Instance ID : uuid:3a5c75f5-d9d2-e143-8f66-618febcefa89 Original Document ID : xmp.did:EEEFA5B7842068118083EA8E68A0BC49 Document ID : xmp.id:516CCF2E972068118083E42B5A562876 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:506CCF2E972068118083E42B5A562876 Derived From Document ID : xmp.did:AB287E5D692168118C148CD92D26CFC2 Derived From Original Document ID: xmp.did:EEEFA5B7842068118083EA8E68A0BC49 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Macintosh) History Changed : / History When : 2013:07:16 12:22:38-05:00 Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 2 Creator : Adobe InDesign CS6 (Macintosh)EXIF Metadata provided by EXIF.tools