Waspmote Lora 868mhz 915mhz Sx1272 Networking Guide

• 1. LoRa and LoRaWAN
• 2. Hardware
• 3. Dual radio with Expansion Board
  • 3.1. Expansion Radio Board
• 4. General considerations
  • 4.1. Waspmote libraries
    • 4.1.1. Waspmote SX1272 files
    • 4.1.2. Constructor
  • 4.2. API functions
  • 4.3. Additional functions
    • 4.3.1. Getting temperature
    • 4.3.2. Getting maximum allowed current supply
  • 4.4. Waspmote reboot
• 5. Transmission modes
  • 5.1. LoRaTM mode
    • 5.1.1. Bandwidth
    • 5.1.2. Coding Rate
    • 5.1.3. Spreading Factor
• 6. Initialization
  • 6.1. Setting on
  • 6.2. Setting off
• 7. Node parameters
  • 7.1. Node address
  • 7.2. Frequency band
  • 7.3. Channel
• 8. Packet parameters
  • 8.1. Structure used in packets
  • 8.2. Maximum payload
• 9. Power gain and sensitivity
  • 9.1. Power level
  • 9.2. RSSI of one packet and RSSI of the channel
  • 9.3. SNR
• 10. Long range tests
  • 10.1. Line of Sight test
  • 10.2. Non Line of Sight tests
    • 10.2.1. Tests in Zaragoza
    • 10.2.2. Test in Paris
• 11. Connectivity
  • 11.1. Topologies
  • 11.2. Connections
    • 11.2.1. Unicast
    • 11.2.2. Broadcast
  • 11.3. Connection parameters
    • 11.3.1. Setting retries
  • 11.4. Sending process
    • 11.4.1. SX1272 API packet structure
    • 11.4.2. Using Frame class to create SX1272 packets
    • 11.4.3. Sending data
  • 11.5. Receiving data
    • 11.5.1. How to receive packets in Waspmote
    • 11.5.2. How to show received Frames
    • 11.5.3. Receiving all packets
• 12. Starting a network
  • 12.1. Choosing a channel
  • 12.2. Choosing a mode
• 13. Joining an existing network
  • 13.1. Channel
  • 13.2. Mode
• 14. Security and data encryption
  • 14.1. Security in transmissions
• 15. Understanding LoRa
  • 15.1. Introduction
  • 15.2. Long Range VS Transmission time / consumption
  • 15.3. LoRa VS XBee 868/900 MHz
  • 15.4. For what applications is LoRa a good option?
  • 15.5. For what applications is NOT LoRa a good option?
• 16. Code examples and extended information
• 17. API changelog
• 18. Certifications