Dongboshi tech H2C Electric- Mountain Board User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3654793
Application ID	QI57gWEXMpbl3ZjMXEBLSQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	21.21kB (265108 bits)
Date Submitted	2017-11-28 00:00:00
Date Available	2017-11-28 00:00:00
Creation Date	2017-08-21 10:34:56
Document Lastmod	2017-11-22 09:46:25
Document Title	User Manual
Document Creator	WPS Office
Document Author:	Administrator

Content
1、Warning......................................................................P1
2、Product Description....................................................P2
3、Using Steps................................................................P2
4、Remote Control...........................................................P3
5、Brake..........................................................................P4
6、Battery and Charging Method.................................P4/5
7、Riding........................................................................P6
8、FAQ...........................................................................P7
9、Warranty....................................................................P8
10、Maintenance..............................................................P9
1.Safety Driving Tips
Safety warnings and precautions described in the manual are very
important, please read it carefully and ride safely.
● Skateboarding is a dangerous sport. When ride it, may fall due to loss of balance,
thus leading to injury. Please ride it carefully.
●Please be sure to wear protective equipment, such as helmets, knee pads, elbow pads.
Please wear suitable clothes to drive, do not ride it barefoot or ride on beach; Tie up
your shoe and don't let the laces contact the wheel or the drive system, which may
cause danger.
●The user should be over 14 years old and weigh no more than 120 kg. If you feel
unwell, please stop ride it. Children under 14 years of age should be accompanied
by a parent driving the product.
● Please drive carefully, because in the driving process, inadvertent encounter with
obstacles may cause sharp slide or losing control. Please pay attention to avoid
pedestrians and other travel tools(such as: skateboards, scooters, bicycles, etc.).
● Please ride the skateboard in the suitable environment out door, Outdoor
environment suitable for taxiing. Please accelerate the skateboard with remote after
steady yourself on the board, do not arbitrarily accelerate the skateboard in other
condition.
●Please don't try the tricks on the board, like jumping, sudden brake etc.
●This product is only for solo driving.
●Please do not use electric skateboard on the steps or on the water's edge.
●Do not touch the motor, wheels and other moving parts with your fingers or other
parts of the body.
●Do not use your mobile phone or headset when driving board.
●Do not slide the skateboard on other vehicles or drag and drop other objects with the
skateboard.
●Do not make products wading, electronic drive parts will be damaged in water.
●Please drive the skateboard only in the flat, open road, do not drive in the potholes,
sand, gravel, muddy and uneven ground. Do not drive on slippery ground, such as
snow, ice, wet ground to prevent slipping.
●Do not use skateboards at night or in poor vision condition.
●Do not use this product in areas where it is not suitable for driving.
●Do not use skateboards in snow and rain.
Disclaimer：
Electric skateboards driving is extreme sports, there is a certain risk. Any casualties or
property losses has nothing to do with the company, the user assumes responsibility.
2. Product Description
Wireless electric skateboard includes motor, battery, remote controller. The battery
and controller are placed in the battery box, and the battery box is under the deck.
- Features:
01. Use the joystick on the remote to control the speed, brake, reverse.
02 . Effective braking system, the braking force is inversely proportional to the speed,
which lead to perfect brake curve.
03. The skateboard is one to one controlled by the remote, 2.4GHz signal would not
produce the signal fault.
04. Two speed modes: High speed and low speed.
3. Using Steps
01. Wear suitable protected.
02. Attach the Velcro to the right size to match the size of the foot.
Starts Up ：
1) Switch on the remote control and adjust the speed to the mode you need.
2) As shown below, press the switch on the battery box to open the skateboard.
Riding:
1. Put your foot into the foot cover, slide the skateboard through the wrist press the
deck.
05. Push accelerator lever to accelerate, pull back to brake. Pressing the button below
the indicator to change the direction.
Power off:
Switch off the remote control
Press the power switch on the controller box, power indicator turns off when
closed-down.
(Figure 1)
4 . Remote Control
(Figure 2)
Speed mode:
Two speed modes of skateboard:
Pushing up is low speed mode, pushing down is high speed mode.
Remote control Charging:
Charge it through the USB plug under the remote, when charging, the indicator light;
and the indicator switch off after fully charged.
5. Brake
Pulling the trigger backward means brake. Please make brake action before braking,
and never brake in the high-speed mode. Skateboard is with brake charging function,
when braking, the battery is automatically charged with Counter Electromotive Force.
6. Battery & Charging
Battery:
01. The power display shows 42V with full charging, while shows 35V when batteries
are wearing out.
When the electricity is less than 10%, the controller will make a "drop" sound.
02. Controller is with over discharge protection function.
03. After the battery finished discharge, please recharge skateboard within 24 hours,
to avoid effecting the life of the battery caused by over discharge.
Battery Maintenance:
01, Do not expose the lithium battery in high temperature or flame, please keep away
from fire.
02, Prevent short circuits overcharge or over-discharge of the lithium batter from
happening.
03, Do not immerse the battery in water or seawater, even wet the battery.
04, Do not reverse the positive and negative of the lithium battery for any reason .
05, Do not use lithium batteries with problems like obvious damage or deformation.
06, Do not connect the lithium battery to the plug socket or car cigarette plug.
07, Never use the lithium batteries with leakage.
08, Do not use lithium batteries in the hot sun (or heated car in the sun ).
Charge:
01, The lithium battery is charged in the temperature range of 01 ° C to 45 ° C.
02, Keep charging for 6-8 hours.
03, Please use the charger provided by the manufacturer..
04, The local charger AC input voltage (100 ~ 250V)
05, Turn off the power before charging.
06, First confirm the charger is connected to the battery, then insert the charger into
the power supply. Otherwise the charging hole may be short-circuited.
07, Do not put chargers and skateboards in a damp place, Keep away from water.
08, Note: When charging keep away from the sofa, bed, carpet.
09, Do not put any weight or object on the skateboard when charging.
10, Prohibit unauthorized removal of the product, otherwise it will be out of the
warranty.
11, When charging, the indicator light is red, when the battery is full, the light turns
green, please pull off the plug in 2 hours.
12, Charging skateboard as far as possible in the case of someone here.
Battery storage:
01, Storage battery and charger at a temperature of - 20 ~ 35 C, low humidity and non
corrosive gas environment.
02, Long period storage:
In the case of long period storage (over three months), lithium battery storage
temperature range is - 10 ~ 20 ° C with low humidity, non-corrosive gas conditions.
7.Riding
01.Preparing
Please riding in a wide space
Standing on the board, let the front wheels ride as the forward, knees bend slightly to
decrease the center of gravity; the other foot as a force support, keep your body lean
forward during the riding.
02. Riding
Observe the road, standing on the skateboard with body slightly down, keep the center
of gravity in the middle of the two feet. Beginners try to use low-speed mode as much
as possible, and in the high-speed mode, it may lead to center of gravity instability.
03.Turning
First, you need to adjust your posture. While turning, bend the knees and adjust the
focus on the side of the skateboard.
Turn right: adjust the center of gravity to the right;
Turn left: adjust to the left. First practice to turn left, then turn right, make some
exercises . The radius of curvature of the bend depends on the strength of the platen.
The smaller the turning radius, the greater the edge pressure on the skateboard.
Do not speed up when turning.
04. Notes:
- Please do not ride on water, sand, gravel or dirt road.
Please do not speed up or brake in a sudden.
- Please check the motor temperature after running for a long time. If overheating,
please drive after it cool down.
Climbing ability: 23
8. FAQ
Problem
Unable to
turn on
Running
time are
shortened.
Unable to
drive
Automatic
shutdown
Probable Causes
Battery has run out
Wires, plugs and other
connectors are
disconnection
Battery is not fully
charged
Battery can not be
charged
Solutions
Skateboard: recharge it, generally need 6-7 hours.
Remote: recharge it, generally need 2 hours.
Check whether the charger is tightly connected with
the socket and the skateboard.
Please charge the battery, generally need 6-7 hours.
Check whether the socket has electricity.
Battery need to be replaced. The average life of
rechargeable battery is 1-2 years. Please replace the
battery in time.
Indicator doesn’t light
Please start up the skateboard
Please re-match the remote . If the two lights are
Indicator doesn’t light,but
flashing at the same time, please immediately shut
the skateboard is on
down and contact the dealer or manufacturer.
Skateboard or remote
Please charge immediately.
control beep
Skateboard light is
flashing (If you do not
press the button to enter
Please contact the dealer or manufacturer.
the code), which indicate
there is a failure of
skateboard
Electricity has run out
Please charge skateboard.
Without any operations
within 10 minutes, the
remote control or
skateboard automatic
shutdown
Turn on the skateboard.
9.Warranty
From the date of purchase, you can enjoy a year warranty service.
Within the warranty period, for reasons below, a charge will be made:
1. Tires and belts are consumables, so they are not included in the warranty.
2. Human caused breakdown for wrongly operation without complying with the
instruction manual.
3. Breakdown caused by wrongly maintain, keep without complying with the
instruction manual.
4. Damage caused by self disassembling, repairing and refitting.
5. During operation, damaged caused by the foreign matters entering the motor.
6. After the modification, original product specifications be changed, reloading with
other brands of parts.
7. Damage, breakdown caused by natural disasters (Fire, earthquake, lightning, water
disaster etc.)
8. Damage caused by wading.
Spare Parts
Please correctly use the parts supplied by the manufacturer. Using inferior parts will
shorten the service life of skateboard.
FCC Caution：
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15
Format                          : application/pdf
Creator                         : Administrator
Description                     : 
Title                           : 
Comments                        : 
Company                         : 
Source Modified                 : D:20170821103456+02'34'
Create Date                     : 2017:08:21 10:34:56+02:30
Creator Tool                    : WPS Office
Modify Date                     : 2017:11:22 09:46:25+08:00
Metadata Date                   : 2017:11:22 09:46:25+08:00
Keywords                        : 
Producer                        : 
Document ID                     : uuid:b10b1ba5-5fc2-4682-b817-28197e310e15
Instance ID                     : uuid:d86140b5-6263-4b74-8064-1a8e40d018d2
Page Count                      : 10
Author                          : Administrator
Subject                         : 
Trapped                         : false

EXIF Metadata provided by EXIF.tools