Dongguan Hele Electronics J11 Bluetooth Headset User Manual J11 sw 066 000002

Dongguan Hele Electronics Co., Ltd. Bluetooth Headset J11 sw 066 000002

Users Manual

QCY-J11QCY-J11BLUETOOTHa.m.Turn on BluetoothVisibilityDevice nameVisible to all Bluetooth devices nearbyAvailable DevicesAvailable DevicesUser ManualOverview How to Wear How to Connect How to ChargeLarge EarGelNote: we recommend that you try middle EarGel first as it fits most people.Gently push EarBud into ear canal and adjust its end towards your mouth then shake your head to check its stability.Maiden pairing: once powering on, earphone will auto enter pairing mode(LED blinks red and blue).Non-maiden pairing: poweroff the earphone then hold MFB for 5s to enter pairing mode.Low battery will be warned by voice prompt.(LED will be solid red when charging and turn to blue once fully charged.)FunctionMulti-point ConnectivityPower-onHold MFB for 2s(LED will be blue for 1s).1. Refer How to Connect to build connectivity with phone1 then power off Bluetooth earphone.2. Hold MFB until LED blinks red and blue. On phone2, search for QCY-J11 and tap to connect.3. On phone1, search for QCY-J11 and tap to finish multi-point connectivity.Three-way Calling & SwitchTap MFB to answer incoming call. If another call is coming in sync, tap MFB to put the first call on hold while activate the second call. Double tap MFB to switch between active call and held call.Basic ParameterModel:J11 Bluetooth version:V4.1Bluetooth profile:HFP,HSP,AVRCP,A2DPOperation range: 10m(crow-fly distance with no obstacle)Noise isolation: DSPStandby time: approx. 70hrTalk time: approx. 3hrCharging time: approx. 1 or 2hrBattery type: li-ionBattery capacity:3.7V 55mAhInput Parameter:5V      70mA(All technical specifications shall be subject to practical performance)OperationVoice AssistantWhen standby, hold MFB for 1s to activate voice assistant(like Siri).Switch Audio Output When calling, hold MFB for 1s to switch audio output between earphone and cellphone.Power-offHold MFB for 3s(LED will be red for 2s).Answer/End CallTap MFB to answer incoming call and tap again to end it.Ignore CallHold MFB for 1s to ignore incoming call.Mute on/offWhen calling, double tap MFB.Pause/PlayWhen playing, tap MFB to pause and tap again to play.On cellphone, search for QCY-J11 and tap to connect(Earphone will auto reconnect to the last device in connectivity records, if any.)Middle EarGel Small EarGelEarWingMFBHold5This form is made by SJ/T 11364 regulation.O:means that hazardous substance content in the homogeneo       us materials of this part is within the limitsof GB/T 26572        regulation.X :means that hazardous substance content in, at least,one        certain homogeneous material of this part is beyond the         limits of GB/T 26572 regulation.Hazardous substances and their contents in the item  (Pb)  (Hg)   (Cd) (Cr(VI))(PBB)(PBDE)Hazardous SubstancesPart NameMain bodyBatteryEar tipsAccessoriesCharging cableLifespan:As the booklet states, the eco-lifespan of the item is 5 yearswhile using it in normal ways. During the period, no dangerousmaterial will be leaked. The item must be recycled by the local law.Notes: Please arrange using time properly as your hearing may             be damaged by using the device for a long time.Tips Warranty CardWarranty Period12 months after you purchase this item.(or you mayinquire your local shopper for more details.) Free Service:Supposing any defects caused by quality issues occur within the warranty period, please take this warranty card and purchase receipts to your distributor for free repairing service. 1. Before using the headset, please read the manual      carefully and keep it for future references. 2.  The headset need to be fully charged prior to first-time      use.3. If the headset is left unused for over two weeks, please     recharge it periodically.4. Please use the chargers made by qualified manufacturer.5. If the headset cannot be found by your phone, please      check whether it is in pairing mode; if left unconnected for     a long while, the headset will exit pairing mode,please      re-enter the mode; if a procedure error of your phone      occurs, reboot it; if a procedure error of the headsetoccurs,      reboot or reset it.             Caveats1. Never disassemble or modify your headset for any      reasons to avoid any damages and danger.2. Do not store the headset in extreme temperatures (under     0℃ or over 45℃).    3. Avoid using the indicator close to the eyes of children or     animals.4. Do not use this headset during a thunderstorm to avoid     irregular function and increased risk of electricshock. 5. Do not use harsh chemicals or strong detergents to     clean the headset. 6. Keep the headset dry.Free repairing will not be accessed under following circumstances:1. Damages caused unauthorized disassembly.2. Defects or physical damages caused by leaking or     dropping off.3. Damages by act of God.Supposing your item is within     any damages or defects except the above circumstances,     please return to us or your distributor for free repairing.Perform standard:Q/HL 2-2017Manufacturer: Dongguan Hele Electronics Co., Ltd.Address: Dalingya Industrial Zone, Daojiao                Town, Dongguan City, Guangdong,                China.Model Number:  Date of Purchasing:User's Phone:User's Name:   User's Address:Shop's Name:Shop's Address:Comments:55mm80mmFCC StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna.  -- Increase the separation between the equipment and receiver.   -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  -- Consult the dealer or an experienced radio/TV technician for help.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.FCC ID:RDR-J11USB Charging DockEarGelMicSkip Track ForwardWhen playing,  double tap MFB.Bluetooth Headset

Navigation menu