Dongguan Hele Electronics Q11 Bluetooth Headset User Manual
Dongguan Hele Electronics Co., Ltd. Bluetooth Headset
User Manual
Overview MFB EarWing White LED1 White LED2 White LED3 Large EarWing Large EarTip Middle EarWIng Middle EarTip Small EarWing Small EarTip Mic Bluetooth Headset Q11 User Manual USB Dock How to Wear How to Connect How to Charge Function Gently push EarBud into ear canal and adjust its end towards your mouth then shake head to check its stability. Power off then hold MFB for 1s to power on again and it will auto trigger pairing mode. (Earphones will auto trigger pairing mode upon any dis-connectivity with current device.) LED1 and LED3 will blink slowly when battery is low. (LED1 and LED3 will be solid white while all three LEDs will be solid white once fully charged.) Power-on Volume Control Specifications: Hold MFB for 1s(Three LEDs will blink white three times in sync). When playing or calling, tap Vol+/- to adjust volume. Power-off Hold MFB for 3s(LED1 and LED3 will be solid white for 2s). Switch Audio Output Model:Q11 Bluetooth version:V4.1 Bluetooth profiles:HFP,HSP,AVRCP,A2DP Operation range: 10m(crow-fly distance with no obstacles) Noise isolation: CVC Standby time: approx. 110hr Talk time: approx. 3hr Charging time: approx. 2hr Input parameter: 5V 60mA Battery type: li-ion Battery capacity: 3.7V 55mAh (All technical specifications shall be subject to practical performance) Hold Last Number Redial When standby or playing music, double tap MFB. Mute on/off Vol+ When calling, double tap MFB to switch mute on/off. Vol- Factory Setting On cellphone, search for Q11 and tap to connect (once power on, earphone will auto re-connect to the last device in connectivity records, if any.) When charging, hold MFB for 3s. (LED1 and LED3 will blink in sync yet LED2 will blink alternately.) a.m. BLUETOOTH Turn on Bluetooth Answer/End Call Tap MFB to answer incoming call and tap again to end the call. Hold Ignore Call Hold MFB for 1s to ignore incoming call. Visibility Visible to all Bluetooth devices nearby Device name Available Devices Q11 Available Devices Q11 Operation Skip Track When playback, hold Vol+/- to skip track forward/backward. Pause/Play Note: we recommend that you try middle EarTip first as it fits most people. When playing music, tap MFB to pause and tap again to resume playing. Tips When calling, hold MFB for 1s to switch audio output between earphone and cellphone. Voice Assistant When standby, hold MFB for 1s to activate voice assistant. Multi-point Connectivity Method 1: refer How to Connect to build connectivity with phone1. On cellphone, turn off Bluetooth connectivity and earphone will auto trigger pairing mode. On phone2, search for Q11 and tap to connect. On phone1, search for Q11 and tap to finish multi-point connectivity. Method 2: refer How to Connect to build connectivity with phone1 then hold both Vol+and Vol- together to trigger pairing mode. On phone2, search for Q11 and tap to connect. On phone1, search for Q11 and tap to finish multi-point connectivity. Three-way Calling & Switch 1. Tap MFB to answer incoming call from phone1(LED 1 and LED 3 blink promptly). If another call is coming from phone2 in sync, tap MFB to put the first call on hold while activate the second one. 2. When calling, double tap MFB to switch between active call and held call. 1. Please read this manual carefully prior to using the device and keep the manual properly. 2. For the first time use, please fully power up both cellphone and charger.Low battery of charger will cause red LED solid of the charger or the charger can not power up for earphone. So please power up the charger before using. 3. Please be sure that your Bluetooth earphone is in "pairing mode", if it can not be spotted by cellphone. As the device will exit "pairing mode", if unpaired or unconnected for a long time. You may need to set it to "pairing mode" again. Supposing any program error occurs in cellphone or this device, please restart cellphone or this device, or reset this device to factory setting. 4. White LED will be solid during charging while off once fully charged, the charging process will last about 2 hours.(Bad contact caused by improper operation or other reasons may switch off white LED even when charging, which results in incomplete charge. So please plug in the charger properly and keep stable charging until white LED is off.) Hazardous substances and their contents in the item Hazardous Substances Part Name (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE) Main body Battery Ear tips Accessories Charging cable This form is made by SJ/T 11364 regulation. O:means that hazardous substance content in the homogeneo us materials of this part is within the limitsof GB/T 26572 regulation. X :means that hazardous substance content in, at least,one certain homogeneous material of this part is beyond the limits of GB/T 26572 regulation. Lifespan: As the booklet states, the eco-lifespan of the item is 5 years while using it in normal ways. During the period, no dangerous material will be leaked. The item must be recycled by the local law. FCC ID: RDR-Q11 REACH Caveats 1.Never disassemble or modify your headset for any reasons to avoid any damages and danger. 2.Do not store the headset in extreme temperatures (under 0℃ or over 45℃). 3.Avoid using the indicator close to the eyes of children or animals. 4.Do not use this headset during a thunderstorm to avoid irregular function and increased risk of electric shock. 5.Do not use harsh chemicals or strong deterge nts to clean the headset. 6.Keep the headset dry. Notes: Please arrange using time properly since your hearing may be damaged by using the device for along time. For any after service, please contact QCY customer-service Perform standard:Q/HL 2-2017 E-mail: kefu@qcymall.com Web: www.qcy.com Manufacturer: Dongguan Hele Electronics Co.,Ltd. Address: Dalingya Industrial Zone, Daojiao Town, Dongguan City, Guangdong Province(QCY Environmental Zone, Dalingya No.5, Yuehui Road) FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 5.6-c067 79.157747, 2015/03/30-23:40:42 Format : application/pdf Title : 2017.12.19 Q11英文说明书 认证用 Metadata Date : 2017:12:19 17:55:28+08:00 Modify Date : 2017:12:19 17:55:28+08:00 Create Date : 2017:12:19 17:55:28+09:00 Creator Tool : Adobe Illustrator CC 2015 (Windows) Thumbnail Width : 256 Thumbnail Height : 28 Thumbnail Format : JPEG Thumbnail Image : (Binary data 4079 bytes, use -b option to extract) Instance ID : uuid:3f856817-0f13-4d61-b1b0-de80584ac2ae Document ID : xmp.did:74618b06-4923-e247-82d0-af5d8dfe029f Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:bab13d7c-2e11-4384-a519-ddaf4b02f478 Derived From Document ID : xmp.did:CA18C1CC61E1E711896CEC299B8E165F Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:0C24A0640DCBE6118E808C09E89F6883, xmp.iid:74618b06-4923-e247-82d0-af5d8dfe029f History When : 2016:12:26 13:53:22+08:00, 2017:12:19 17:55:24+08:00 History Software Agent : Adobe Illustrator CS6 (Windows), Adobe Illustrator CC 2015 (Windows) History Changed : /, / Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : False N Pages : 1 Max Page Size W : 837.340266 Max Page Size H : 135.466667 Max Page Size Unit : Millimeters Font Name : ArialMT, Arial-BoldMT, FZLTXHK--GBK1-0, FZLTCHK--GBK1-0, SourceHanSansCN-Medium, SourceHanSansCN-Light, AdobeSongStd-Light, SourceHanSansCN-Regular Font Family : Arial, Arial, 方正兰亭纤黑, 方正兰亭粗黑_GBK, 思源黑体 CN, 思源黑体 CN, Adobe 宋体 Std, 思源黑体 CN Font Face : Regular, Bold, Regular, Regular, Medium, Light, L, Regular Font Type : Open Type, Open Type, TrueType, TrueType, Open Type, Open Type, Open Type, Open Type Font Version : Version 6.90, Version 6.90, 1.00, 1.00, Version 1.000;PS 1;hotconv 1.0.78;makeotf.lib2.5.61930, Version 1.000;PS 1;hotconv 1.0.78;makeotf.lib2.5.61930, Version 5.016;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168, Version 1.000;PS 1;hotconv 1.0.78;makeotf.lib2.5.61930 Font Composite : False, False, False, False, False, False, False, False Font File Name : arial.ttf, arialbd.ttf, FZLTXHK.ttf, 兰亭粗黑 GBK.TTF, SourceHanSansCN-Medium_0.otf, SourceHanSansCN-Light_1.otf, AdobeSongStd-Light.otf, SourceHanSansCN-Regular_0.otf Plate Names : Cyan, Magenta, Yellow, Black, PANTONE Cool Gray 8 C Swatch Group Name : 默认色板组 Swatch Group Type : 0 Swatch Colorant Swatch Name : PANTONE Cool Gray 8 C, PANTONE Cool Gray 9 C, PANTONE 714 C Swatch Colorant Type : SPOT, SPOT, SPOT Swatch Colorant Tint : 100.000000, 100.000000, 100.000000 Swatch Colorant Mode : Lab, Lab, Lab Swatch Colorant L : 57.647099, 50.196098, 77.254898 Swatch Colorant A : 0, 0, 27 Swatch Colorant B : -2, -2, 50 Producer : Adobe PDF library 15.00 Page Count : 1 Creator : Adobe Illustrator(R) 17.0 For : Administrator, Bounding Box : -91 -1844 2180 -1604 Container Version : 11 Creator Version : 19EXIF Metadata provided by EXIF.tools