Dongguan Jin wen hua digital technology HX-P270 Daze speaker User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2756515
Application ID	WkBkdZPpVLWM+NzePx5CQA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	17.01kB (212619 bits)
Date Submitted	2015-09-21 00:00:00
Date Available	2015-09-22 00:00:00
Creation Date	2015-09-14 15:46:44
Producing Software	Acrobat Distiller 8.0.0 (Windows)
Document Lastmod	2015-09-14 15:46:44
Document Title	Microsoft Word - AOK UI for HX-P270 Updated one.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	toby

AOK UI INTRUCTION for HX-P270
TABLE OF CONTENT
Change history…………………………………………………………………………………………………………………………………………………………………………………2
1.
Product setting…………………………………………………………………………………………………………………………………………………………………………………2
2.
System feedback………………………………………………………………………………………………………………………………………………………………………………4
3.
Product states………………………………………………………….………………………………………………………………………………………………………………………6
Change History
Issue
Date
Handle by
Comments
00
July-30-2015
Mir xie
First release
1. Product setting: buttons, LEDs, Audio sources
2.1 Buttons and switches and Touch, the systems have below buttons:
Power switch button, MFB, Vol+, Vol-, LED display functional button
Button
2.2 Connection of Power and audio system, the system has the following connection:
Audio port
In
Aux-in
Out
Data port
Power port
In
DC jack
Out
USB out for charging
2.3 Button press Type and Duration. The following table describes how the buttons react and describes timing constraints
Button pressing time
Press type
Duration(Seconds)
Short press
X<0.5
Long press
2 10%
ii. Low: 0 < X ≤ 10%
‐ Low battery indication available (Red LED
flashing warning)
‐when X>95% charging Red LED off
iii. Critical: X = 0%
‐ DUT off.
Connection
ERP(Energy
related
product) compliance
Reset
Bluetooth connectivity
Audio input
Aux in, BT audio
Audio output
No
Physical button for audio switch
No special button available
Auto audio switch feature
Aux‐in audio source priority to BT audio.
Auto Standby
No
Auto Standby Duration
No
Power consumption to meet ERP
<0.3W
Auto shut off without paired
NO
Factory Reset
Not
Hardware Reset
Yes
Bluetooth naming
HX‐P270
Wireless range
10 m
Supported audio codec
SBC
Supported profiles
A2DP, AVRCP so on
# of supported device in pairing list
1 paired device recorded
Supports Dual devices
NO
Volume sync
No
BT Pairing duration
Within 1 minutes
BT Reconnect duration
Power up = 2sec
Link lost = 10sec
BT reconnect method (single device or all devices)
Power up = attempt reconnect to same device.
Link lost = attempt reconnect to same device
twice, each time for 10 seconds
PC compatibility
Windows version
No information
9
Phone
device
Mac version
MacBook (Pro, Air) with OS X 10.8.2 or later
Phone model with OS version
iPod touch (2-5 Gen), iPod Nano (7 Gen),
compatibility
iPhone (6,5, 4s, 4, 3Gs, 3G), iPad (1, 2, 3, 4,
mini 1, 2),
2.5 Audio source, Available audio source Input:
Audio input
Line (3.5mm) In
Bluetooth
Image
2.6 Available Audio Source Output: No audio output
Sequence & Priority
The audio source switch command shall allow DUT to switch sources using the following priority and sequence:
Priority
Audio input
Sequence
Default
Manual/Automatic
switch
Line (3.5mm) In
Line in is 1st
For Speaker is default.
NA
Bluetooth
BT is 2nd
Speaker, is default
NA
2. SYSTEM FEEDBACK
3.1 The system has the following indicators, list of Audio Indications. (Prompt tone)
Indicator
Description
File Name
Power on
Switch on
Provide by HMDX
Power down
using or Switch off
No
Auto power off
No Bluetooth connection and Audio input
No
Low battery warning
The batter low
No
BT Pairing started
Blue LED flashing
No
BT pairing successfully
Blue LED stable
Provided by HMDX
BT pairing timeout
Blue LED flashing
No
BT disconnect manually
After pressing PP button and then enter into
Provided by HMDX
3.5 Volts
paring status
BT disconnect – link lost
Entering into paring status
No
10
BT reconnect successful
As pairing successful
Provided by HMDX
11
BT reconnect timeout
Entering
No
12
Max volume reached
Reminder
Provided by HMDX
13
Min volume reached
no
No
into paring status
3.2 List of Physical Visual Indications
Product off, USB connected
Indicator
color
Description
Product LED
null
off
Charging LED
●
Solid as long as charging. Off when charging complete
Indicator
color
Description
Product LED
null
off
Charging LED
null
off
Power off and
USB not connected
Powering up
Indicator
color
Description
●
Product LED
On
Powering down
Indicator
color
Description
Product LED
null
off
Product on
Event
indicator
color
Description
Aux audio source
Product LED
●
Aux as active audio source
BT audio source
Product LED
●
1.
At Re-connect or Pairing mode, Product LED flashing
2.
After paired, product LED lighting stable
Charging mode
Event
Indicator
color
Description
Charging
Charging LED
●
Solid as long as charging. Off when charging complete.
Battery mode
Event
indicator
color
Description
Battery healthy
Charging LED
null
Charging LED off, not required
Battery low
Product LED
●
Flashing 1 sec on, 1 sec off until USB cable is inserted or battery died.
Battery critical
All LEDs
null
Off, device is off.
BT activity (The Flashing LED 0.2 seconds on and 0.2 seconds off)
Event
indicator
color
Description
BT not active
Product LED
●
Aux as active audio source.
BT pairing
Product LED
●
Speaker: Blue LED Slow flashing (0.2sec on, 0.2sec off) for 2min or until paired
successfully.
BT connected
Product LED
●
Speaker: Blue LED stable on
BT disconnecting
Product LED
●
Pressing Vol+ and Vol­ simultaneously for 5 seconds, disconnect current BT device,
enter into pairing mode
Speaker: Blue LED flashing 0.2sec on, 0.2sec off until paired successfully.
Factory Reset
indicator
color
Description
Product LED
null
Unknown
3. Product status
State
Description
Off
Details: When device is Off without USB connected or Power button switch off (MCU off, Amp off, charging off, BT off,)
To Enter: Removed USB cable and battery off
To Exit: Insert USB cable charging
On
Details: Device is on (MCU on, Amp on, charging on, BT on – connectable)
To Enter: Power on
To Exit: Power off
BT on
Details: Device is on (MCU on, Amp on, charging on, BT on – discoverable, connected, connecting)
To Enter: BT activity in progress
To Exit: Power off
Key Assignment
Power switch
States vs Press type
On position
Off position
On
Power on
Off
Power off
Play/Pause
States vs Press type
SP (<0.5)
LP >2~3s)
Off
Try me
No response
On
Play or pause
No response
On-aux inserted
Play or pause
No response.
BT on power up reconnect
No response, Continue BT re-connecting
No response
BT on pairing
No response. Continue BT Pairing
No response.
BT on connected
Play/pause
No response
Brightness control
States vs Press type
SP (<0.5)
LP >2~3s)
Off
No response
No response
On
Change Brightness in turn
No response.
On-aux inserted
Change Brightness in turn
No response
BT on power up reconnect
Change Brightness in turn
No response
BT on pairing
Change Brightness in turn
No response
BT on connected
Change Brightness in turn
No response
 or 
States vs Press type
SP (<0.5)
LP >2~3s)
Off
No response
No response
On
Change volume by 1 step.
No response
On-aux inserted
Change volume by 1 step
Change volume continuously.
BT on power up re-connect
Change volume by 1 step.
No response
BT on pairing
Change volume by 1 step.
No response
BT on connected
Change volume by 1 step.
next or previous
Vol+ and Vol- pressing at the same time
No response
Disconnect current BT, enter into
pairing mode.
4. UI
Refer to “SPC-0028 - HMDX Controls Logic Specification - Bluetooth Loudspeakers(D)” for the UI flow chart
5.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party.
Responsible for compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
IC Statement
- English: "
This device complies with Industry Canada licenceexempt
RSS standard(s). Operation is subject
to the following two conditions: (1) this device may not cause interferenc
e, and (2) this device
must accept any interference, including interference that may cause und
esired operation of the device."
- French:"
Le présent appareil est conforme aux CNR d'Industrie Canada applicable
s aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suiv
antes : (1) l'appareil ne
doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accept
er tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en comprom
ettre le fonctionnement."

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Acrobat Distiller 8.0.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2015:09:14 15:46:44+08:00
Create Date                     : 2015:09:14 15:46:44+08:00
Format                          : application/pdf
Title                           : Microsoft Word - AOK UI for HX-P270 Updated one.doc
Creator                         : toby
Document ID                     : uuid:df503298-6d96-4410-be83-bacf5c9e650c
Instance ID                     : uuid:cc6909ec-fb06-4c0c-a35c-aa9825cbad76
Page Count                      : 9
Author                          : toby

EXIF Metadata provided by EXIF.tools