Dongguan Koppo Electronics BT592 Bluetooth headset User Manual

Dongguan Koppo Electronics Co.,Ltd Bluetooth headset

Contents

User Manual

ChargeＵｓｅｒ　ＭａｎｕａｌＢＴ－５９２CONTROLSCONTROLS AND FEATURES BLUETOOTH BLUETOOTHSPERKER&MICPairing Indicator LightPower/Pair/Play/Pause/Volume+DC Power InputLine InMicrophonePress to adjust the volume increase/Previous song Volume-Press to adjust the volume decrease/Next songSpeaker Switch KeySlide to switch fromheadphone to speaker mode.Please note:The external speakers onthe headphone are not waterproof.Do not usein rainy or dampweather conditions.Press and hold to power the unit on.Press and hold for 5+seconds to begin pairing;Press and hold to Power the unit offPress to play or pause the current track;Pairing a Bluetooth Device for the First Time1.With the unit off, press and hold the Power/Pair/Play/Pause button for about 4s.The indicator will flash red and blue.When pairing, remain within 3 feet of the unit.2.Using the native controls on your bluetooth device,select the BT-592 in your bluetooth setting to pair. If your device requests a password, enter the password 0000.Refer to the user manual for your specific device for instructions onpairing and connecting bluetooth devices.After initial pairing,the unitwill stay paired unless unpaired manually by the user or erased dueto reset of the device;Remarks: If your device should become unpaired or you find it isunable to connect,repeat the above steps;SAFETY INFORMATION ACCESSORIESHeadphone speaker diameter:Φ40mmImpedance:32ΩS.P.L: 109dB±3dBRated power: 100mWFrequency Response:20Hz-20KHzSpeaker diameter:Φ40mmImpedance:4ΩS.P.L: 81dB±3dBRated power:3WFrequency Response: 160Hz～20KHz Microphone Unit:Φ4*1.5mmS.P.L:-42±3dBLINE IN LED INDICATORSPlaying music wirelessly Using the audio inputRequire a 3.5mm audio cable(included)1.Connect a 3.5mm audio cable to the line in input on the unit and the audio output on an audio device.2.Use the native device controls on the connected device to play your audio through the unit.Note:The headphones do not have to be powered on to hear musicthrough the line in input.Do this to conserve battery power;Using the Speaker phone1.When a call is received, a ringtone will sound through the speakers.2.Press the power/pair/play/pause button t accept the call or accept the call with the native controls on the connected device.3.The incoming call received through the device will now be heard through the headphones.4.To end a call, press the power/pair/play/pause button or end the call using the native controls on th connected device.1.To play or pause a selected track,use the native controls on the connected bluetooth device or press the power/pair/play/pause button.2.Audio played through the connected bluetooth device will now be heard through the headphones;StatusPower onPower offChargingFully chargedPairingIndicatorFlashing blue lightNo lightRed light onBlue light onFlashing redand blue lightFEATURESSupports Bluetooth v3.0Wireless range:33 feetSupports profile A2DP,AVRCP,HSP,HFPBuilt-in microphone with noise cancellation technologyMicro-USB port for battery recharge3.5mm audio inputAdjustable headband3.5mm audio cableUSB cableUser manualINCLUDESDC battery power:built-in 1000 mAHRechargeable lithiumion batteryHeadphone battery time: up to 25+hoursSpeaker battery time: up to 3 hoursblue LEDVolume Control: Under the music or conversation mode:(1)Volume +: Press and hold the volume + (3~5s), the volume will increase gradually. (2)Volume -: Press and hold the volume - (3~5s), the volume will decrease gradually.In the state of music mode, press the volume + shortly (1s), then willgo to previous song; press the volume - shortly (1s), then will go tonext song11 1210Connect the included USB Cable to theUSB Port of Computer or Adapter USBPort.Bluetooth headset
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation FCC Statement

Navigation menu