Dongguan Newmen Electronics Technology MS-388OR-R wireless mouse User Manual MS 388

Dongguan Newmen Electronics Technology Co.,LTD wireless mouse MS 388

Users Manual.pdf

1、The package contents2.Schematic diagram of the product (Figure 1):3、Installation instructions2 receivers placed at Windows ME/2000/XP/Vista/Win7/Win8HP FM510 Wireless MouseInstructions for use1PCS1PCS2PCS1PCS1PCSFigure 1Figure 2 Figure 3Figure 4Figure 5Then open the battery coverBatteryBatteryReceiverReceiverReceiverON/OFF1.Remove the USB receiver from the packing, plugged into the computer's USB port.Wireless mouseUSB ReceiverAA Alkaline BatteryInstructions for use (harmful substance element table)Product warranty card2. As shown in the diagram to open the mouse button, the two AA batteries into the battery slot(note that the battery positive and negative polarity), cover the bottom of the mouse button, the electric Switch to the ON source. (Fig. 2/3/4)3. To carry out and when not in use can also be USB receiver into the receiver slot within the mouse. (Figure 5)Intimate tip:1. When you do not use the mouse, the mouse can be the power switch at the bottom of the dial to OFF, prolonging the service life of the battery.Note: the habit of battery life as the personal use of the mouse may be different. Do not put the battery discarded and thrown into the fire, when replacing the batteries, please the old battery into the battery recycling box.4. System support:HP pre-sales support hotline:800-820-2255 400-820-2255Working time: 08:30-18:00（Monday to Friday）800-810-5110HP customer service hotline support:08:30-18:00（Monday to Friday）More HP product information, landing:www.hp.com.cnContact your local sales HP authorized dealer for more details.Beijing Road, Chaoyang District No. 112 Jianguo China HP Co. Ltd. China HP buildingPostal Code: 100022HP (HP) R & D Co partnership company copyright 2009.Warranty Telephone: 800-810-5110Warranty Period: one yearFactory address: 2727 Jinke Road, Zhangjiang Hi-tech Zone, Shanghai, ChinaPostal Code: 201203QualificationInspector:You must identify the logo in electrical and electronic products sold within the territory of the people's Republic of China, the period of use of digital symbol in the normal use state green products.This form according to the provisions of SJ/T 11364 preparation。○：Said the content of the harmful substances in all homogeneous materials in the parts are in the GB/T 26572 requirements limited the following requirements。×：Said the content of harmful substances in at least one of the components of the homogeneous material beyond the requirements limited in accordance with GB/T 26572。 Table marked "*" components, because the global technology development limited and can not achieve the level of substitution of hazardous substances。 Printed circuit board assembly *: includes a printed circuit board and parts, electronic components etc. According to the different product types, you buy the products may not contain all of the above components× ○ ○ ○ ○ ○× ○ ○ ○ ○ ○Part nameHarmful substances（Pb） （Hg） （Cd） （Cr（VI）） （PBB） （PBDE）To meet the China electronic electrical products harmful substances limit related laws, regulations and other requirements, lenovo harmful substances in our products, according to the parts classification, the statement below.Printed circuit board assembly*Casing and accessories CAUTIONRISK OF EXPLOSION IF BATTERY IS REPLACEDBY AN INCORRECT TYPE.DISPOSE OF USED BATTERIES ACCORDINGTO THE INSTRUCTIONSCorrect Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental saferecycling.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.Consult the dealer or an experienced radio/TV technician for help.*The sample maximum operating temperature of 60 degrees.

Navigation menu