Dongguan Newmen Electronics Technology MS-388OR-R wireless mouse User Manual MS 388
Dongguan Newmen Electronics Technology Co.,LTD wireless mouse MS 388
Users Manual.pdf
1、The package contents
2.Schematic diagram of the product (Figure 1):
3、Installation instructions
2 receivers placed at
Windows ME/2000/XP/Vista/Win7/Win8
HP FM510 Wireless Mouse
Instructions for use
1PCS
1PCS
2PCS
1PCS
1PCS
Figure 1
Figure 2 Figure 3
Figure 4
Figure 5
Then open the battery cover
Battery
Battery
Receiver
Receiver
Receiver
ON/OFF
1.Remove the USB receiver from the packing, plugged into the
computer's USB port.
Wireless mouse
USB Receiver
AA Alkaline Battery
Instructions for use (harmful substance element table)
Product warranty card
2. As shown in the diagram to open the mouse button, the two
AA batteries into the battery slot(note that the battery positive
and negative polarity), cover the bottom of the mouse button,
the electric Switch to the ON source. (Fig. 2/3/4)
3. To carry out and when not in use can also be USB receiver
into the receiver slot within the mouse. (Figure 5)
Intimate tip:
1. When you do not use the mouse, the mouse can be the
power switch at the bottom of the dial to OFF, prolonging
the service life of the battery.
Note: the habit of battery life as the personal use of the
mouse may be different. Do not put the battery discarded
and thrown into the fire, when replacing the batteries, please
the old battery into the battery recycling box.
4. System support:
HP pre-sales support hotline:800-820-2255 400-820-2255
Working time: 08:30-18:00（Monday to Friday）
800-810-5110
HP customer service hotline support:08:30-18:00（Monday to Friday）
More HP product information, landing:www.hp.com.cn
Contact your local sales HP authorized dealer for more details.
Beijing Road, Chaoyang District No. 112 Jianguo China HP Co. Ltd. China HP building
Postal Code: 100022
HP (HP) R & D Co partnership company copyright 2009.
Warranty Telephone: 800-810-5110
Warranty Period: one year
Factory address: 2727 Jinke Road, Zhangjiang Hi-tech Zone, Shanghai, China
Postal Code: 201203
Qualification
Inspector:
You must identify the logo in electrical and electronic products sold within the territory of the
people's Republic of China, the period of use of digital symbol in the normal use state green
products.
This form according to the provisions of SJ/T 11364 preparation。
○：Said the content of the harmful substances in all homogeneous materials in the parts are in the
GB/T 26572 requirements limited the following requirements。
×：Said the content of harmful substances in at least one of the components of the homogeneous material
beyond the requirements limited in accordance with GB/T 26572。
Table marked "*" components, because the global technology development limited and can not achieve
the level of substitution of hazardous substances。
Printed circuit board assembly *: includes a printed circuit board and parts, electronic components etc.
According to the different product types, you buy the products may not contain all of the above components
× ○ ○ ○ ○ ○
× ○
○ ○ ○ ○
Part name
Harmful substances
（Pb） （Hg） （Cd） （Cr（VI）） （PBB） （PBDE）
To meet the China electronic electrical products harmful substances limit related laws, regulations and other requirements,
lenovo harmful substances in our products, according to the parts classification, the statement below.
Printed circuit
board assembly*
Casing and
accessories
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS
Correct Disposal of this product. This marking indicates
that this product should not be disposed with other
household wastes throughout the EU. To prevent possible
harm to the environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your
used device, please use the return and collection systems
or contact the retailer where the product was purchased.
They can take this product for environmental saferecycling.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions : (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which thereceiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
*The sample maximum operating temperature of 60 degrees.