Dongguan Newmen Electronics Technology MS146OR Mouse User Manual S CNL MS 146RF Quick User Guide EN

Dongguan Newmen Electronics Technology Co.,LTD Mouse S CNL MS 146RF Quick User Guide EN

manual

MS-146OR Mouse Manual SSUUMMMMAARRYY 1. CONTENTS 2. INSTALLATION 3. SYSTEMS SUPPORTED 4. KEY-PRESS INSTRUCTION PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
1 CONNECTLAND –MS-146OR Mouse – Guide 1. CONTENTS The Connectland wireless optical mouse is included with the following accessories: a nano USB 2.4GHz receiver, two LR03 AAA 1.5V batteries and a quick user’s guide. Please contact immediately your vendor if one of them is missing. 2. INSTALLATION a) Press battery cap button and open battery cap. b) Insert two LR03 AAA 1.5V batteries (caution to the polarity). c) Take out the nano USB receiver and replace the cap. Switch on the mouse. Plug the nano receiver into your computer’s USB port. System will recognize the new USB device and installed by itself. Then user will see “device can be used », after successfully installed. Battery cap button 2x Batteries AAA compartment ON/OFF USB receiver 2.4GHz compartment PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
2 CONNECTLAND –MS-146OR Mouse – Guide 3. SYSTEMS SUPPORTED The wireless mouse is compliant with the following operating systems: - Microsoft Windows 98SE/ME/2000/2003/XP/VISTA (Insert Microsoft Windows CDROM if asked) - IBM and PC compatible 4. KEY-PRESS INSTRUCTION CPI adjustable instruction (Count Per Inch) : The mouse has 2 sensitive modes: 800cpi and 1600cpi. To activate normal use mode: 800cpi Press the CPI button. CPI light indicator will flash on 4 times. To activate sensitive use mode: 1600cpi Press the CPI button again. CPI light indicator will flash on 8 times. Back CPI and battery CPI/DPI adjustable Scroll wheel Right Forward Left button PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
3 CONNECTLAND –MS-146OR Copyright © 2008. Connectland, All Rights Reserved. PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
Federal Communications Commission (FCC) Statement You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. NOTE: This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause interference and 2. This device must accept any interference received, including interference that may cause undesired operation.

Navigation menu