Dongguan Newmen Electronics Technology MS191OR-1 Mouse User Manual C8ABD2B3B4ABD5E6CDBCC6AC

Download:
Mirror Download [FCC.gov]
Document ID	1393981
Application ID	9yfbtlhngZH6zCT1d/Xq/w==
Document Description	manual1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	196.51kB (2456350 bits)
Date Submitted	2010-12-21 00:00:00
Date Available	2010-12-21 00:00:00
Creation Date	2010-12-21 11:45:02
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2010-12-21 11:46:29
Document Title
Document Creator	PScript5.dll Version 5.2
Document Author:	Nature

MS-1480R
R71”: 21 O*148MM
User Manual
Package contents
Wireless Optical Mouse
USB receiver
2AAAalkaline batteries
User manual
Installing the battery (Diagram 1)
, ’l
ONlOFF swltch —r—>°'6"
Battery cover
Posltlon tor storlng
recelvel
lDlagram1)
(Dlagram 2)
Whenever new batteries are installed, make sure that they are lresh 1 .5V
AAA batteries.
A)Remove the battery cover,
B) InserttwoAAAbatteries into the battery compartment. make sure to properly
orient the positive (+) and negative (-) ends as specified by the marks in the
battery compartment, Replace the battery cover and make sure it is locked,
CJSwitch on the mouse, the LED in bottom of mouse will blink.
Installing the receiver (Diagram 2)
The codes of receiver and mouse were successfully connected ln factory.
User can directly use the complete set otproduets. no worryeboutthe code
connecting.
A)Insert receiver into USB portof PC, the computer system will automatically
detect itand prepare it forlull operation.
B)The mouse may use then.
It the user wrongly operates, please redo the above operating procedures
“ON/OFF" switch (Diagram 1)
Vtfithout using the mouse, user may turn 0" it by “ON/OFF" switch for savirg
battery power.
Description ol keys and DPI adyusting
DPleadyustlng key
Scrollan Wheel
Backward key
Rl htke —v-r—
g y Frontward key
Left key
System requirements
Windows 2000/XP/Vlsta/7
FCC Statement
Thls edulpment has been tested andfoundto complywlth the llmltstora Class E
dlgltal devlce. pursuant to part 15 of the FCC rules These llmlts are deslgned to
provlde reasonable protectlorl agamst harmrll lrltellerehce lrr a reslaermal lhstallatloh
Thls eouloment generates, uses and can radiate radlo frequency energy and, ll
not lnstalled and used in accordance Wlth the lnstructlons, may cause harmtul lnterference
to radlo communlcatlons However, there is no guarantee that lnterferencerll not
occur lrl a partloular lnstallallorl lfthls eoulpmeht does cause harmful lhterlerehoe
to radlo or teleVlslon receptlon, whlch can oe determined byturnihg theeouloment
olt and on, the user ls encouraged to try to correct the lnterlerence by one or more at
the rolloWlng measures:
Reorlent or relocate the receiVlng antenna
-lncrease the separatlcn between theequlpmentand receiver
Connecttheequlpment lnto an outleton aclrcult dlrrerent from that to whlchthe
recelver ls connected
-Consultthe dealer or an experienced radio/Tvtechnlclan for help
To assure contlnued compliance. anychangesormodlficatlohshotexpresslyapproved
by the party responslbleror compliance could void the user‘s authorltyto operate this
equipment (Example- useonly shielded lrtell‘ace cableswhen connectlng to
computerorperlpheraldevlces)
FCC Radiation Exposure Statement
Thls eoulpment complieszth FCC RF lad atlon exposure Ilmlts set term for an
uncontrolled envlronrnent. Thlstransmltte' must not be co-located oroperatlng ln
conjunctlon wlth any otherantenna Ortrarlsmltter
Thls eoulpment complieszth Part 150f the FCC Rules Operatlon ls subject to the
lolloWlngtwo Condltlons:
rnrms devloe may not cause harmrul lhterlererlce, and
12) Thls devlce must acceptany lhterference recelved lhcludlng lnterrerence that
may cause undeslred operatlon
Caution!
The manufacturer ls not responsible forany radlo or TV lnterference caused by
unauthorized modlficatlonsto thisedulpment Such modlflcationscould vold the
userauthorltyto operate the eoulpmerll
Address Tongsheng Office BulldlngDalang Street, Baoan Dlstrlct.Shenzhen.Chlna
ZlP 518109
Tel 0755733569899
Fax 075583668958
Http'Nwww newmen corn on
MS-1500R
RTT: 105*148MM
User Manual
Package contents
2.4G Wireless OpticaIMouse
Nano USB receiver
ZAAAaIkaline batteries
User manual
Installing the battery (Diagram 1)
DNIOFF swltch
Battery cover
Position lei sioiing
ieceiver
(Dlagram 1)
(Diagram 2)
Whenever new batteries are installed, make sure that they are fresh 1 .5V
AAA batteries.
A)Remove the battery cover.
B) InserttwoAAAbatteries into the battery compartment. make sure to properly
orient the positive (+) and negative (») ends as specified by the marks in the
battery compartment. Replace the battery coverand make sure it is locked.
C)Switch on the mouse, the LED in bottom of mouse will blink.
Installing the receiver(Diagram 2)
The codes of receiverand mouse were successfully connected in factory.
User can directly use the complete set of products, no worry about the code
connecting,
A)Insert receiver into USB port of PC, the computersystem will automatically
detect it and prepare it for full operation,
B)The mouse may use then.
Ifthe user wrongly operates, please redo the above operating procedures.
"ON/OFF“ switch (Diagram 1)
Vlfithout using the mouse. user mayturn off it by "ON/OFF" switch for saving
battery power.
3.Description of keys and DPI adiusting
Rlflhl key
3 way scroilingwhool
Lon key Del-nanisiing key
eockw-io key
Fronlward key
System requirements
Windows M E/ZOOOIXP/Vista
FCC statement
Thlsequlpment has been tested and found to comply mm the Ilrnlts for a Class B
digital de'vlce, pursuant to part 15ofthe FCC rules nese Ilrnlls are designed to
proVide reasonable protection against harmful interference ln a residential installation
Thisequipment generates uses and can radlate radio frequency energy and, if
not Installed and used in accordance Wlth the instructlons, may cause harmful Interference
to ladlo cummunlcallens Huwevel, there ls no guaranteethat Interference wlll not
occur in a particular lnstallation Ifthis equlpment does cause harmful interference
to radioor televlslon reception, whlch can be determined by turning the equipment
off and on the user is encouraged to try to correct the lnterference by one or more of
thefollowlnq measures
-Reorient or relocate the renewing antenna
~|ncrease the separatlon between the equipment and recelver
-Connectthe eculpment into an outlet ona clrcult different from that to which the
receiver is connected
-Consult the dealer or an experienced rattle/TV tecnnlclan for help.
To assure continued compliance. any changes or mad lflcations not expressly approved
by the party responslble for compliance could mm the user's authority to operatethls
equipment (Exam ple- use only shielded lnterface cables when connecting to
computer or perlpheral devices)
FCC Radi ion Exposure statement
Thrsequrpment complies wlth FCC RF radlatlon exposure Ilrnlts set rorth for an
uncontrolled envlron ment This transmitter must not be co—Iocated oroperaling in
conjunction Wlth any other antenna or transmltter
Thrsequrpment complies wlth Part 15 or Ihe FCC Rules Operation lssubjectto the
following two condltlone
(1 ) This device may not cause harmful interference, and
(2)Tn|sdevlcernust acceptany Interference recelved, lncludlng interferencethat
may cause undeslred operatlon
Caution!
The manufacturer is not responsible for any radlo or TV interference caused by
unauthorized mcdlficatlonsto thls equlpment Such modifications could Vold the
useraulhorily to operate the equlpment
Address Tongsneng Office Building Dalang Street. Baoan Dislrict.Shenzhen.Chlna
ZIP 518109
Tel 07533559599
Fax was-assesses
Http llwww newrrlen coin ch
fl
MS—157OR
RTl': 105*148MM
User Manual
Package contents
2.4G Wireless Optical Mouse
Nano USE receiver
ZAAAaIkaline batteries
User manual
Installing the battery (Diagram 1)
5 Ti
i\ “Ll-fi—ON/OFF swrtch
Battery cover
Position ror storing
receiver
(Diagram 1) (Diagram 2)
Whenever new batteries are installed. make sure that they are fresh 1.5V
AAA batteries.
A)Remove the battery cover.
5) Insert two AAAbatteries into the battery compartment, make sure to properly
orient the positive (+) and negative (-) ends as specified by the marks in the
battery compartment. Replace the battery coverand make sure it is locked.
Ciswuch on the mouse, the LED in bottom of mouse will blink.
Installing the receiver(Diagram 2)
The codes 01 receiver and mouse were successfully connected in factory.
Usercan directly use the complete setoforoducts. no worry aboutthe code
connecting
A)Insert receiver into USB port of PC. the computersystem will automatically
detectitand prepare lttortull operation.
B)The mouse may use then.
lithe user wrongly operates. please redo the above operating procedures.
"ON/OFF" switch (Diagram 1)
Without using the mouse. user mayturn off it by ”ON/OFF" switch for saving
battery power.
3.Description of keys and DPI adjusting
Right key
f h 3 way Scrolling wheel
“M“ —l < DPl-odjustlng key
Backward key \\ \ \\
Frontwam key —‘1§ )
‘\ i
System requirements
Windows ME/2000/XP/Vista
FCC Statemnl
Thlseoulpmenl has been tested and round to comply with the limits for a Class B
digital deVlce pursuant to part iEi or the FCC rules hese limits are designed to
provide reasonable protection against harmful interlerence in a residential Installation
This equipment generates, uses and can radiate radiorreqiiency energy and, If
not Installed and used In aoccrdanoewlth the instructions. may cause harmful Interlerenoe
to radio communications. However. there is no guaranteethat interlerence will not
occur In a partlcular Installatlon lfthls Equipment does cause harmful Interference
to radio ortelewslon reception, which can be determined by turning the equipment
off and on. the user is encouraged to try to correct the interlerence by one or more or
the lollowtng measures.
-R’eorientor relocate the reoeivrng antenna
elnoreasetne separation between the equipment and receiver
-Cnnnect the euulpment Into an outlet on a circuit dlffererit from that to whlch the
receiver isconnecred
-CDnsu|t the dealer Cir an experienced radIOITV technician for help
To assure continued compliance. any changes or modifications not expressly approved
by the party responsible ror compliance could void the user's authority to operate this
equipment (Example- use onlyshielded interlace cables when connecting to
computer or peripheral devices)
FCC Radlafion Exposure Statement
This equipment complies wtth FCC RF radiation exposure limits set lorth lor an
uncontrolled environment Thistransmitter must not be coelocated or operating in
conjunction with any other antenna or transmitter
This equipment complies with Part 15 or the FCC Rules.0peration is Subject to the
lollowmg two conditions
(1 ) This dewce may not cause harmtui interference. and
(2) This device must accept any interference received including interference that
may cause undesired operation
cautlon!
The ma nulacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment Such modillcatlons could veld the
user authority to operate the equipment
Address Tongsheng Office Building Daiang Street. Baoan District Shenznen China
ZIP 518109
Tel 075533669899
Fax 075533665968
Http I/www newmen com on

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2010:12:21 11:45:02+08:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2010:12:21 11:46:29+08:00
Metadata Date                   : 2010:12:21 11:46:29+08:00
Format                          : application/pdf
Creator                         : Nature
Title                           : 
Document ID                     : uuid:8b69e715-016e-4fbb-8604-f0a715fa7e34
Instance ID                     : uuid:2d43cff4-73b5-49ca-88fc-61c6893211ea
Page Count                      : 3
Author                          : Nature

EXIF Metadata provided by EXIF.tools