Dongguan Taide BT026 Bluetooth Speaker User Manual
Dongguan Taide Industrial Co., Ltd. Bluetooth Speaker Users Manual
Contents
- 1. Users Manual
- 2. User Manual
User Manual
Dear user, Thank you very much for choosing BT026 Speaker. Please read this user manual carefully in order to operate this device in the correct manner. I. THINGS TO REMMEBER. Please store and use this product at normal temperature; DO NOT expose this product to rain or dampness DO NOT toss this product and prevent it from falling and being damaged DO NOT disassemble, repair and modify this product As it is inbuilt with lithium battery, DO NOT place it in fire to avoid danger! II. GENTLE REMINDER 1. To prolong the speaker‘s life span and for your wellbeing, please don't listen to music with max volume for a long time to avoid hearing damage. 2. When something is wrong with the speaker, please immediately put it of, unplug the USB, to prevent the speaker and other parts from getting damaged. III. OVERVIEW Function: Power on or Power off Handsfree icon Bluetooth icon AUX line in DC 5V jack Battery indicator icon Bluetooth indicator icon Aux indicator icon Decrease volume or select last track Increase volume or select next track Play or Pause Scene Lamp Switch Increase Lightness Decrease Lightness IV. SPECIFICATIONS Model: BT026 Bluetooth specification: Bluetooth V4.2 Transmission distance : ≦ 10M USB charging voltage: DC 5V/500mA Built-in battery: Lithium battery, 4000mAh Output power: 6W x 2 Frequency response: 90Hz-20KHz Sensitivity: 80db±2db S/N ratio: ≥ 76dB V. PACKING LIST 1. Speaker * 1 2. USB cable * 1 3. User manual * 1 VI. FUNCTION DESCRIPTION BLUETOOTH OPERATION 1. Turn on the speaker. The blue indicator light will flash to detect Bluetooth enabled devices near you. The blue indicator light will go out if no Bluetooth device is detected within 5 minutes. 2. Pair the speaker with the desired Bluetooth device. 3. Play/pause as desired by pressing. AUX PLAYBACK OPERATION 1. Turn on the speaker. 2. Insert a 3.5mm audio cable into the aux jack on the back of the speaker, connecting to any audio device such as mobile phones or computers with the other port. 3. press to enter mute mode and re-press to release the sound. LAMP LIGHT OPERATION 1. Press to turn on the lamp light 2. Press to control the lightness. CHARGING THE SPEAKER The speaker has a built-in Lithium battery. The battery is rechargeable and provides approx 18 hours of continuous operation when fully charged. Use the micro-USB cable to charge the speaker. The red indicator light will illuminate. The red indicator light will go of when the speaker is fully charged. VIII. COMPATIBILITY Device equipped with BLUETOOTH 2.1 or higher version, such as the iPad, iPhone, iPod Touch as well as a majority of "Smartphone” that support Bluetooth. Bluetooth 2.1 including agreements as:A2DP, AVRCP, HFP. VIII. TROUBLESHOOTING PHENOMENO TROUBLESHOOTING PROBLEM Failure in connection and pairing The sound is less or distorted Discontinuous music The indicator for Bluetooth mode is not on 1. Inspect whether the speaker is in search mode or restart the machine. 2. If many Bluetooth enabled devices are switched on then it will cause difficulty in searching the device. So, please switch off other Bluetooth equipments. 1. Inspect the volume of the Bluetooth equipment and adjust the volume. 2. The power of battery might be insufficient. Please charge it. See whether the effective connection distance of sound is exceeded, or, whether there is obstacle between the speaker and the Bluetooth equipment. 1. It indicates that the power of the battery is not sufficient. Please try again after charging it. 2. Restart the machine. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Language : zh-CN Tagged PDF : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Creator : 陈俊霖 Title : SC004音响说明书 Create Date : 2017:09:07 05:45:45Z Creator Tool : Microsoft® Office Word 2007 Modify Date : 2017:09:07 13:45:59+08:00 Metadata Date : 2017:09:07 13:45:59+08:00 Producer : Microsoft® Office Word 2007 Document ID : uuid:8a906d86-a579-4136-9bec-204938f37c4f Instance ID : uuid:48396b4f-afee-4f14-817b-16f4523edac3 Page Count : 4 Author : 陈俊霖EXIF Metadata provided by EXIF.tools