Dongguan Taide BT041 Bluetooth Speaker User Manual
Dongguan Taide Industrial Co., Ltd. Bluetooth Speaker
user manual
SPECIFICATION Bluetooth Specifications:Bluetooth® V4.0 Transmission distance: up to 10 m (This may vary based on environmental factors or the type of Bluetooth® device being used) Built-in battery: Lithium Battery 300mAh USB Recharge voltage: DC 5V Output power: 3W Frequency Response: 90Hz-20Khz Sensitivity: 80db±2db Product dimensions: 2” x 2” x 2” BLUETOOTH OPERATION GENERAL FUNCTIONS Voyage Bluetooth® Speaker Bottom View Volume Control PreviousTrack/Next Track PACKING • Bluetooth® Speaker with strap • Mini USB Charging Cable • User Manual Back Cover AUX PLAYBACK OPERATION 1. Turn on the speaker. 2. Connect the speaker to a smartphone, audio device, or laptop 3. The volume, play/pause, and next/previous song button can only be adjusted on the device that is connected through the 3.5mm AUX cable (AUX Cable not included). CHARGING THE SPEAKER 1. When the battery is low, please charge via the included Mini USB cable. The charging time is approximately 1 hour and provides up to 2 hours of continuous operation. 2. The LED indicator light will be red during charging and will turn off once it is fully charged. page 04 1. Please ensure that the Bluetooth function has been turned on in the settings of your Bluetooth enabled device. 2. Turn the speaker on, the indicator light will flash to detect Bluetooth enabled devices near you and will enter pairing mode. The indicator light will go off if no Bluetooth devices are detected within 5 minutes. 3. “GEMLINE SPKR” will appear on the Bluetooth device list, select “GEMLINE SPKR” to establish pairing. If instructed to enter a PIN code, please enter ‘0000’. 4. When you want to play audio from another Bluetooth device, disconnect the speaker from the original device and follow steps 1-3 to re-pair the speaker with a new Bluetooth enabled device. Play/Pause Button Strap Instruction Manual Front Cover WARNING 1. Do not disassemble, repair, or modify the speaker. 2. Do not place product in or near fire to avoid danger, as it uses a lithium battery. 3. Avoid storage at extreme temperatures, this can shorten the battery life and may affect the speaker. 4. Keep the speaker dry and do not store the speaker in damp areas to avoid damage to the speaker. 5. Avoid dropping the speaker as it may damage the speaker. KIND REMINDER 1. To prolong the speaker’s life span and to avoid hearing damage, please do not listen to music under high volume for long periods of time. 2. When an error occurs with the speaker, please turn off the speaker and restart it to troubleshoot. 3. When the speaker’s power is low, the Bluetooth range may be affected. Please charge the speaker to avoid disruptions during use. page 05 page 02 Unable to pair the speaker with a mobile device page 03 1. Inspect whether the speaker is searching for a Bluetooth enabled device to connect to. If not, restart the headphones. 2. Difficulty in searching and connecting to a desired device can be affected if multiple devices are equipped, turned on, and in range for Bluetooth connectivity. Please turn off or disable the Bluetooth function on the other devices. 3. The power of the battery is insufficient, please recharge the speaker. 1. Inspect the distance between the speaker and the Bluetooth enabled device, it may exceed the Bluetooth transmission range. 2. Inspect if there is an obstacle between the speaker and the Bluetooth enabled device. 3. The power of the battery is insufficient, please recharge the speaker. page 06 page 07 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1)this device may not cause interference, and(2) this device must accept any interference, includinginterference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables auxappareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :(1) l'appareil ne doit pas produire de brouillage, et(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre lefonctionnement.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : 3.1-701 Format : application/pdf Title : #3972_3973_Voyage Bluetooth® Speaker Instruction Manua Creator Tool : Adobe Illustrator CS5.1 Create Date : 2016:06:27 16:38:42-04:00 Modify Date : 2016:09:30 18:03:51+08:00 Metadata Date : 2016:09:30 18:03:51+08:00 Thumbnail Width : 256 Thumbnail Height : 128 Thumbnail Format : JPEG Thumbnail Image : (Binary data 10383 bytes, use -b option to extract) Document ID : xmp.did:EDEC951FA73CE6119B34A4D06906AD35 Instance ID : uuid:d880ed40-3923-44cc-ba12-ca7376c1d6cb Rendition Class : proof:pdf Original Document ID : uuid:89729B405116E611A80FDE1394D5DE7B Derived From Instance ID : uuid:b02e00bc-c9bd-491e-bcfc-504ac2f0da58 Derived From Document ID : xmp.did:75D6E73BE028E611BF59F8C01C9D2319 Derived From Original Document ID: uuid:89729B405116E611A80FDE1394D5DE7B Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:75D6E73BE028E611BF59F8C01C9D2319, xmp.iid:EDEC951FA73CE6119B34A4D06906AD35 History When : 2016:06:02 12:37:02-04:00, 2016:06:27 16:38:36-04:00 History Software Agent : Adobe Illustrator CS5.1, Adobe Illustrator CS5.1 History Changed : /, / N Pages : 1 Has Visible Transparency : False Has Visible Overprint : False Max Page Size W : 16.000000 Max Page Size H : 8.000000 Max Page Size Unit : Inches Font Name : ArialMT, Arial-BoldMT, AdobeSongStd-Light, TimesNewRomanPSMT Font Family : Arial, Arial, Adobe 宋体 Std, Times New Roman Font Face : Regular, Bold, L, Regular Font Type : Open Type, Open Type, Open Type, Open Type Font Version : Version 5.21, Version 5.21, Version 5.010;PS 5.002;hotconv 1.0.57;makeotf.lib2.0.21895, Version 5.21 Font Composite : False, False, False, False Font File Name : arial.ttf, arialbd.ttf, AdobeSongStd-Light.otf, times.ttf Plate Names : Black Swatch Groups Group Name : Default Swatch Group Swatch Groups Group Type : 0 Producer : Adobe PDF library 9.90 Page Count : 3 Creator : Adobe Illustrator(R) 15.0 For : Jessica Rousseau, Bounding Box : 0 233 1152 810 Container Version : 11 Creator Version : 15 Image Height : 577 Image Width : 1152 Image Size : 1152x577 Megapixels : 0.665EXIF Metadata provided by EXIF.tools