Dongguan Taide BT049 Bluetooth Speaker User Manual
Dongguan Taide Industrial Co., Ltd. Bluetooth Speaker
user manual
ws
PRECAUTIONS
1.Please store and use this product at the ambient temperature;
2.Do not expose this product to the rain or damp surroundings;
3.Prevent this product from falling that could result in
serious damage;
4.Do not dismantle, repair or modify this product on your own;
5.In order to avoid any risk, do not dispose this product
inappropriately or toss it into the fire as there is a built-in
lithium battery.
CONSIDERATE HINTS
1. Do not turn up the volume to a fair high level constantly
as this could shorten the service life of this product or impair
your hearing;
2. When encountering any fault during operation, please cut
off the power supply and disconnect the USB cable to prevent
further damage to the speaker or other components;
3. The Wireless transmission range or connectivity could be
affected by low battery power. In that case, please recharge
immediately.
OVERVIEW
Wireless Speaker
Volume down/Last track
- : Volume down or select last track
+: Vlume up or or select next track
Power on or Power off, Hands-free call
control button/Play/Pause
BLUETOOTH OPERATION
1.Pressfor 3 seconds to turn on the speaker. The indicator
light will flash to detect Bluetooth enabled devices near you.
The indicator light will go off if no Bluetooth device is detected
within 5 minutes.
2.Pair the speaker with the desired Bluetooth device.
3.Press Play / Pause. + Short press select to increase the
volume, press and hold down a switch. - Short press to
decrease volume, press and hold on a jump.
4. When you want to play music from another Wireless device,
disconnect the speaker and restart the Wireless speaker
and re-pair.
SPEAKER PHONE OPERATION
Press to answer an incoming call; press to hang up.
Keep pessing to reject an incoming call.
Double click to redial the last phone number.
AUX PLAYBACK OPERATION
1. Turn on the speaker.
2. Insert an 3.5mm audio cable into the aux jack, connecting
to any audio device such as mobile phone ith
the other end of the cable.
3.Play/pause as desired by pressing
CHARGING THE SPEAKER
The speaker has a built-in Lithium battery. The battery is
rechargeable and provides approx 3.5 hours continuous
operation when fully charged.
Use the micro-USB cable to charge the speaker. The red
indicator light will glister. The red indicator light will go off
when the speaker is fully charged.
SPECIFICATION
Wireless Speaker: Wireless V2.1+EDR
Transmission Distance: ≤10M (depending
upon operation environment and devices
to which it connects)
USB Recharge Voltage: DC 5V
Built-in Battery: Lithium battery 500mAh
Output Power: 3W
Frequency Response: 90Hz-20KHz
Sensitivity: 80db±2db
Signal to Noise Ratio (SNR): ≥80dB
product dimension: 78*60*58.8mm(LxWxH)
Package Contents
1x Enusic 001 Wireless Speaker
1x Micro USB Charging Cable
1x 3.5mm Audio Cable
1x User Manual
COMPATIBILITY
Device equipped with Wireless 2.1 or higher version (for
details please refer to the relevant agreements, general
specification), such as the IPAD, IPHONE (the second
generation and IPHONE with updated IPHONE 3.1 software),
IPOD TOUCH, MAC with Wireless, and most of smart phone
or computer support Wireless
Wireless 2.1 including agreements as: A2DP,
AVRCP, HFP.
Trouble shooting
Faults
Phenomena
Unable to pair up
with other devices
The sound is rather
low or distorted
The music stops from
time to time
The Wireless indicator
remains off
1. Check if the speaker is still in the
process of search or switch it off
and then on.
2. There are too many enabled
Wireless devices within 10 metres
circle that cause difficulty in
connection. If so, please turn these
Wireless devices off.
1. Check the Wireless device’s volume
and then adjust it to a proper level.
2. Recharge the battery
Check whether the speaker’s
effective transmission range is
exceeded or there is an obstacle
between the speaker and enabled
Wireless device.
1. It suggests the battery power
drops quite low and retry once
being recharged.
2. Turn it on again.
Solutions
Power on/off
Play/Pause/
Hands-free Call
Aux input Micro USB Port
User Manual
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment. This device complies with Part
15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.