Dongguan Taide BT049 Bluetooth Speaker User Manual
Dongguan Taide Industrial Co., Ltd. Bluetooth Speaker
user manual
User Manual PRECAUTIONS 1.Please store and use this product at the ambient temperature; 2.Do not expose this product to the rain or damp surroundings; 3.Prevent this product from falling that could result in serious damage; 4.Do not dismantle, repair or modify this product on your own; 5.In order to avoid any risk, do not dispose this product inappropriately or toss it into the fire as there is a built-in lithium battery. CONSIDERATE HINTS 1. Do not turn up the volume to a fair high level constantly as this could shorten the service life of this product or impair your hearing; 2. When encountering any fault during operation, please cut off the power supply and disconnect the USB cable to prevent further damage to the speaker or other components; 3. The Wireless transmission range or connectivity could be affected by low battery power. In that case, please recharge immediately. OVERVIEW Power on/off Play/Pause/ Hands-free Call Wireless Speaker Aux input Micro USB Port Volume down/Last track SPEAKER PHONE OPERATION Press to answer an incoming call; press to hang up. Keep pessing to reject an incoming call. Double click to redial the last phone number. AUX PLAYBACK OPERATION 1. Turn on the speaker. 2.Insert an 3.5mm audio cable into the aux jack, connecting to any audio device such as mobile phone s w ith the other end of the cable. 3.Play/pause as desired by pressing - : Volume down or select last track +: Vlume up or or select next track Power on or Power off, Hands-free call control button/Play/Pause BLUETOOTH OPERATION 1.Pressfor 3 seconds to turn on the speaker. The indicator light will flash to detect Bluetooth enabled devices near you. The indicator light will go off if no Bluetooth device is detected within 5 minutes. 2.Pair the speaker with the desired Bluetooth device. 3.Press Play / Pause. + Short press select to increase the volume, press and hold down a switch. - Short press to decrease volume, press and hold on a jump. 4. When you want to play music from another Wireless device, disconnect the speaker and restart the Wireless speaker and re-pair. CHARGING THE SPEAKER The speaker has a built-in Lithium battery. The battery is rechargeable and provides approx 3.5 hours continuous operation when fully charged. Use the micro-USB cable to charge the speaker. The red indicator light will glister. The red indicator light will go off when the speaker is fully charged. SPECIFICATION Wireless Speaker: Wireless V2.1+EDR Transmission Distance: ≤10M (depending upon operation environment and devices to which it connects) USB Recharge Voltage: DC 5V Built-in Battery: Lithium battery 500mAh Output Power: 3W Frequency Response: 90Hz-20KHz Sensitivity: 80db±2db Signal to Noise Ratio (SNR): ≥80dB product dimension: 78*60*58.8mm(LxWxH) Package Contents 1x Enusic 001 Wireless Speaker 1x Micro USB Charging Cable 1x 3.5mm Audio Cable 1x User Manual COMPATIBILITY Device equipped with Wireless 2.1 or higher version (for details please refer to the relevant agreements, general specification), such as the IPAD, IPHONE (the second generation and IPHONE with updated IPHONE 3.1 software), IPOD TOUCH, MAC with Wireless, and most of smart phone or computer support Wireless Wireless 2.1 including agreements as: A2DP, AVRCP, HFP. The sound is rather low or distorted 1. Check the Wireless device’s volume and then adjust it to a proper level. 2. Recharge the battery The music stops from time to time Check whether the speaker’s effective transmission range is exceeded or there is an obstacle between the speaker and enabled Wireless device. The Wireless indicator remains off 1. It suggests the battery power drops quite low and retry once being recharged. 2. Turn it on again. Trouble shooting Phenomena Faults Unable to pair up with other devices Solutions 1. Check if the speaker is still in the process of search or switch it off and then on. 2. There are too many enabled Wireless devices within 10 metres circle that cause difficulty in connection. If so, please turn these Wireless devices off. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res XMP Toolkit : 3.1-702 Create Date : 2016:01:18 15:50:39+08:00 Creator Tool : CorelDRAW X6 Modify Date : 2016:04:15 16:29:10+08:00 Metadata Date : 2016:04:15 16:29:10+08:00 Format : application/pdf Creator : Administrator Title : 未命名 -1 Producer : Corel PDF Engine Version 16.1.0.843 Document ID : uuid:14b817f0-a6bb-4608-9d98-772cb6a0bf1f Instance ID : uuid:ce3e7dc7-a012-4b00-89c7-8cf1702c2585 Page Count : 2 Profile CMM Type : Lino Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : IEC Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : HP Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Author : AdministratorEXIF Metadata provided by EXIF.tools