Dongguan Taide BT117 Bluetooth Speaker User Manual

Dongguan Taide Industrial Co., Ltd. Bluetooth Speaker Users Manual

user manual

ENGLISH Dear user, Thank you very much for choosing BT117 Bluetooth Portable Speaker. Please read this user manual carefully in order to operate this device correctly and bring its excellent performance. I. NOTICE Please store and use this product at normal temperature; DO NOT expose this product to rain or damp; DO NOT disassemble, repair and modify this product; DO NOT toss this product and prevent it from falling and being damaged; As it is inbuilt with lithium battery, DO NOT cast or place it in fire to avoid danger! II. KIND REMINDER 1. To prolong the speaker‘s life span and for your physical and mental health, please don't listen to music under big volume for a long time to avoid hearing damage. 2. When something wrong with the speaker, please immediately shut off the power switch, plug off the USB, to prevent the speaker and other parts are damaged. 3. Power shortage will affect Bluetooth distance or Bluetooth easy to disconnect, please charge in time. III. OVERVIEW “/ / ” Click “pause” during playing and click “play” when it is paused. Long press left to previous track, Short press left to volume down. Long press right to next track,, Short press right to volume up.
IV. SPECIFICATION Model: BT117 Bluetooth specification: Bluetooth V2.1+EDR Transmission distance : ≦ 10M ( It varied when the environmental factors and the connected Bluetooth devices are different ) USB charging voltage: DC 5V/500mAh Built-in battery: Lithium battery, 300mAh Output power: 3W Frequency response: 90Hz-20KHz Sensitivity: 80db±2db S/N ratio: ≥ 76dB V. PACKING LIST 1. Speaker * 1 2. USB cable * 1 3. User manual * 1 VI. FUNCTION DESCRIPTION BLUETOOTH OPERATION 1. Turn on the speaker. The green indicator light will flash to detect Bluetooth enabled devices near you. The green indicator light will go out if no Bluetooth device is detected within 5 minutes. 2. Pair the speaker with the desired Bluetooth device. 3. Play/pause as desired by pressing. / / CHARGING THE SPEAKER The speaker has a built-in Lithium battery. The battery is rechargeable and provides approx 2.5-hour continuous operation when fully charged. Use the micro-USB cable to charge the speaker. The red indicator light will illuminate. The red indicator light will go out when the speaker is fully charged. VII. COMPATIBILITY Device equipped with BLUETOOTH 2.1 or higher version (for details please refer to the relevant agreements, general specification), such as the IPAD, IPHONE (the second generation and IPHONE with updated IPHONE 3.1 software), IPOD TOUCH, MAC with Bluetooth, and most of smart phone or computer support Bluetooth. Bluetooth 2.1 including agreements as：A2DP, AVRCP, HFP.
VIII. TROUBLESHOOTING PROBLEM TROUBLESHOOTING Failure in connection and pairing for many times 1. Inspect whether the speaker is in the status of searching, or, restart the machine. 2. The surrounding Bluetooth equipments are plentiful, which causes the difficulty in searching. So, please close the other Bluetooth equipments. The sound is small or distorted 1. Inspect the volume of the Bluetooth equipment and adjust the volume. 2. The power of battery is insufficient, please charge it. Discontinuous music See whether the effective connection distance of sound is exceeded, or, whether there is obstacle between the speaker and the Bluetooth equipment. The indicator for Bluetooth mode is not on 1. It indicates that the power of the battery is not sufficient. Please try again after charging it. 2. Restart the machine. Hints: Another trouble, please consult the dealer or an experienced IT technician for help. PHENOMENON
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Navigation menu