Dongguan Taide H027 Bluetooth Headphone User Manual

Dongguan Taide Industrial Co., Ltd. Bluetooth Headphone

user manual

Bluetooth Headphone H027 User manual Thank you for using our company’s Bluetooth Headphones. Please read this user manual carefully in order to operate this product correctly. I. NOTICE Please store and use this product at a normal temperature DO NOT expose this product to rain or damp areas DO NOT throw or drop this product DO NOT disassemble, repair, or modify this product This product has a lithium battery, to avoid danger DO NOT place it near or in a fire II. KIND REMINDER 1. To prolong the headphones life span and to avoid hearing damage, please do not listen to music under high volume for long periods of time. 2. When an error occurs with the headphones, please turn off the product and restart to troubleshoot. 3. When the headphone power is low, the Bluetooth range may be affected. Please charge the headphones to avoid disruptions during use. Product Description. Bluetooth Version:V4.1Battery Specifications: 300mAh,built-in rechargeable lithium battery. Charging Voltage:DC4.2-5.5V V. PACKING LIST 1. Headphone * 1 2. User manual * 1 Function description 1,Startup: Toggle switch to “ON”,the device starts up and enter “BLUETOOTH Mode” automatically. 2,Shutdown Toggle switch to “OFF”,LED indicator light turns off. Button Description ON/OFF: Switch on/off
M:LED flashing lights control / : Play/Pause/Answer Calls/Play Music / :Long press for previous song/short press reduce volume / : long press for next song / short press increase volume Mode: 1) Pairing Operation: a. For the firs time pairing: boot into “Bluetooth Mode” automatically,LED indicator light turns to blue.If can not search and pair with the last connected smart device within 3 seconds,it will automatically enters pairing mode.LED indicator light rapidly alternating flashes with blue and green.Please open the smart device’s bluetooth searching function,and select the device “THD Bluetooth Headphone”,after successful pairing,voice prompts “connected”,LED indicator light turns to blue. b. Re-pairing:turn off the attached smart device’s Bluetooth function,voice prompts”Disconnected”,LED indicator lightturns to blue.If can not search and pair with the last connected smart device within 3 seconds,the headphone will automatic re-enter the pairing mode.Open another smart device’s bluetooth searching function,and select the device” THD Bluetooth Headphone”,after successful pairing,voice prompts”connected”,LED indicator light turns to blue. c. Follow-up pairing:automatically pair the last connected device in 3 seconds after boot. 2) Red,Blue,Green three colors LED flashing lights control Long press “M” button can open/close the LED flashing lights. LED flashing light :flash is based on the high,medium and low frequiency of the vocal music,which corresponding to the red,blue and green color lights VIII. TROUBLESHOOTING PROBLEM TROUBLESHOOTING Failure to connect or pair the headphones to an audio device 1. Confirm the device you wish to pair with the headphone has Bluetooth capabilities 2. Check battery life, headphones may need to be charged 3. Inspect whether the headphone is in the status of searching for Bluetooth device. 4. There may be too many Bluetooth enabled devices in the area, please turn off Bluetooth function on devices you do not want to pair with the headphones. The sound is too low or distorted 1. Inspect the volume of the Bluetooth equipment and adjust the volume. 2. The battery life is low, please charge the headphones. Discontinuous music 1. Move the paired Bluetooth device closer to the headphones. 2. Make sure there are no obstacles between the Bluetooth device and the headpones. The indicator light for Bluetooth mode is not on 1. The battery life is too low. Please charge the headphones and try again. 2. Restart the headphones by powering off and turning back on. Hints: Another trouble, please consult the dealer or an experienced IT technician for help.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Navigation menu