Dongguan Xing Yue Electronic XO-9267 Bluetooth Speaker User Manual

Dongguan Xing Yue Electronic co., Ltd Bluetooth Speaker

User Manual

Banner Bluetooth SpeakerInstruction Manual7198-071 x Banner Bluetooth Speaker1 x USB to Micro-USB charging cable1 x 3.5mm Audio cable1 x Instruction ManualBluetooth Version: 4.1Speaker driver diameter: 40mmRated output power: 3WFrequency response: 100Hz - 18KHzCharging input: 5V/500mA Built-in 400mAh/3.7V lithium ion batteryPlayback time at max volume: 2 hoursIt takes around 2 hours to charge the speaker from 0 to 100%LED flash in red while being chargedLED will turn off when charging completeCharging the speaker:Using a regulated USB adapter. Connect a USB cable to a USB adapter. Using the Micro-USB connector, connect the other end of the USB cable to the “DC 5V” port on the speaker. Plug the USB adapter into the outlet to begin charging.Using your computer. Connect a USB cable to a USB outlet on your computer. Using the Micro-USB connector, connect the other end of the USB cable to an “DC 5V” port on the speaker. Make sure the computer is on to begin charging the speaker.Connecting the speaker with Bluetooth:Switch the speaker “ON” using the ON/OFF switch. Press the Mode button until the speaker announces “Bluetooth Mode”. Using a Bluetooth enabled device, search for “Banner” from the list of available pairs. Once selected, the connection should announce it is successful with a chime sound.Using the speaker:When receiving a phone call, the speaker will pause the current audio. Press the Play/Answer button to answer the call, press this button again to end the call.Short press : play/pause the audioShort Press : next trackLong press : volume increaseShort Press : previous trackLong press : volume decreaseWARNING–When using this product, basic precautions should always be followed, including the following:Read all the instructions before using the product.Charge the speaker completely before initial use for best practices.If the device does not respond once it is powered on, the battery capacity may be low. Do not over charge the internal battery.Do not immerse into water or expose it to moisture or weather conditions.Do not drop, knock, or shake. Rough handling can damage the internal precision component and its boards.Keep away from children, this device is not a toy.Keep away from fire or other sources of heat. Expose to high temperatures may cause it to explode.Do not short-circuit, as this may cause damage to the unit.Unauthorized changed or modifications may void your right to use this product.While using, always comply with any special regulations that may apply to the area you are in and always turn off your mobile device when its use is prohibited.Note: In order to charge device use only accessory cable (provided with device) or the cable included with your own device by the manufacturer.1.a.b.2.a.3.a.b.c.d.e.f.•1.2.3.4.5.6.7.8.9.10.11.*1.2.3.4.5.••••••••••Vol -/Previous trackAnswer/End Call, Play/PauseLED IndicatorModeVol+/Next trackWhat’s included:Tech SpecificationsInstructions: SAFETY PRECAUTIONS:MADE IN CHINA5421 3This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.To assure continued compliance, any changes or modifications not expressly approved by the party.Responsible for compliance could void the user’s authority to operate thisequipment. (Example- use only shielded interface cables when connecting tocomputer or peripheral devices).This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation.RF warning statement:The device has been evaluated to meet general RF exposure requirement.The device can be used in portable exposure condition without restriction.This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.FCC Statement:7198-07.indd 1 1/19/17 3:40 PM

Navigation menu