Dongguan Xing Yue Electronic XO-9267 Bluetooth Speaker User Manual
Dongguan Xing Yue Electronic co., Ltd Bluetooth Speaker
User Manual
Banner Bluetooth Speaker
Instruction Manual
7198-07
1 x Banner Bluetooth Speaker
1 x USB to Micro-USB charging cable
1 x 3.5mm Audio cable
1 x Instruction Manual
Bluetooth Version: 4.1
Speaker driver diameter: 40mm
Rated output power: 3W
Frequency response: 100Hz - 18KHz
Charging input: 5V/500mA
Built-in 400mAh/3.7V lithium ion battery
Playback time at max volume: 2 hours
It takes around 2 hours to charge the speaker
from 0 to 100%
LED flash in red while being charged
LED will turn off when charging complete
Charging the speaker:
Using a regulated USB adapter. Connect
a USB cable to a USB adapter. Using the
Micro-USB connector, connect the other end
of the USB cable to the “DC 5V” port on the
speaker. Plug the USB adapter into the outlet
to begin charging.
Using your computer. Connect a USB cable
to a USB outlet on your computer. Using the
Micro-USB connector, connect the other end
of the USB cable to an “DC 5V” port on the
speaker. Make sure the computer is on to
begin charging the speaker.
Connecting the speaker with Bluetooth:
Switch the speaker “ON” using the ON/
OFF switch. Press the Mode button until
the speaker announces “Bluetooth Mode”.
Using a Bluetooth enabled device, search for
“Banner” from the list of available pairs. Once
selected, the connection should announce it is
successful with a chime sound.
Using the speaker:
When receiving a phone call, the speaker
will pause the current audio. Press the Play/
Answer button to answer the call, press this
button again to end the call.
Short press : play/pause the audio
Short Press : next track
Long press : volume increase
Short Press : previous track
Long press : volume decrease
WARNING–When using this product, basic
precautions should always be followed,
including the following:
Read all the instructions before using the
product.
Charge the speaker completely before initial
use for best practices.
If the device does not respond once it is
powered on, the battery capacity may be low.
Do not over charge the internal battery.
Do not immerse into water or expose it to
moisture or weather conditions.
Do not drop, knock, or shake. Rough handling
can damage the internal precision component
and its boards.
Keep away from children, this device is
not a toy.
Keep away from fire or other sources of heat.
Expose to high temperatures may cause it
to explode.
Do not short-circuit, as this may cause
damage to the unit.
Unauthorized changed or modifications may
void your right to use this product.
While using, always comply with any special
regulations that may apply to the area you
are in and always turn off your mobile device
when its use is prohibited.
Note: In order to charge device use only
accessory cable (provided with device) or the
cable included with your own device by the
manufacturer.
1.
a.
b.
2.
a.
3.
a.
b.
c.
d.
e.
f.
•
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
*
1.
2.
3.
4.
5.
•
•
•
•
•
•
•
•
•
•
Vol -/Previous track
Answer/End Call,
Play/Pause
LED Indicator
Mode
Vol+/Next track
What’s included:
Tech Specifications
Instructions: SAFETY PRECAUTIONS:
MADE IN CHINA
5421 3
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to
radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and
receiver.
-Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV
technician for help.
To assure continued compliance, any changes or
modifications not expressly approved by the party.
Responsible for compliance could void the user’s
authority to operate this
equipment. (Example- use only shielded interface cables
when connecting to
computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
RF warning statement:
The device has been evaluated to meet general RF
exposure requirement.
The device can be used in portable exposure condition
without restriction.
This device complies with part 15 of the FCC Rules.
Operation is subject to the condition that this device does
not cause harmful interference.
FCC Statement:
7198-07.indd 1 1/19/17 3:40 PM