Dongguan Yuanfeng Technology G1 G1 User Manual

Dongguan Yuanfeng Technology Co., Ltd G1 Users Manual

Users Manual

Instructions for using PETBIZ Dog TrackerAndroid systemDownload Petbiz APP in Play StoreIOS systemDownload Petbiz APP in Apple App Store a. Open Petbiz APPb. Click on the bottom [DEVICE] →[Device management] →[Associated with pet] After filling in and saving the pet information, you can start using the deviceTake out device, plug in thepower and charge it to automatically boot.The battery charge time is about 120 minutes from 0% to 100%1.Download Petbiz APP2.Bind and activate the device3. Associate with pet4.Start the deviceSteady red light: Charging Steady blue light: Charging is completed/Fully chargedDevice ID (on back of device)a. Open Petbiz APPb. Click the bottom [DEVICE] →Click [Bind new device] →Input Device ID →Select the device you want to be activated [Device management] →[Activate]Associated with petAdd a new pet+Bring the strap to the deviceWear it on the collar or harnessof your pet5. Wear and usePrecautionsLights on top of device are in different colors and different ways, indicating that the device works in different states.Blue light is on and then flashes 3 times: The boot of device is completed.Blue light is on for 3 seconds: Device is turned off.Blue light is on and continues to flash: Device is in the “Looking for pet” states, speeds up positioning and reports. Blue light is on for 2 seconds and is off for 2 seconds: .setats ”edargpu erawmriF“ ni si eciveDNote: The light is off during normal use.PETBIZ Dog Tracker with waterproof level up to IPX7Meet the waterproof needs of dogs' daily lifeNote: High diving is not recommendedWet cloth wipe or water rinsePress the reboot button on USB cable to restart the device when device is charging (this USB cable is not recommended to charge phone)Indicator lightWaterproofEquipment cleaning methodReboot deviceThe distance between user and device should be no less than 20cm.Reboot buttonThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.All relevant FCC ID:FCC ID: YNG-G1 contains FCC ID：XMR201707BG96FCC Statement

Navigation menu