Dongguan Yuanfeng Technology HA01-001 Intelligent Helmet User Manual

Dongguan Yuanfeng Technology Co., Ltd Intelligent Helmet

User Manual

Download: Dongguan Yuanfeng Technology HA01-001 Intelligent Helmet User Manual
Mirror Download [FCC.gov]Dongguan Yuanfeng Technology HA01-001 Intelligent Helmet User Manual
Document ID2950695
Application IDR6TEVn91dW9ZODNnzb/eHA==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize83.32kB (1041439 bits)
Date Submitted2016-04-05 00:00:00
Date Available2016-04-06 00:00:00
Creation Date2015-12-22 13:28:40
Producing SoftwaredoPDF Ver 7.3 Build 391 (Windows 7 Business Edition (SP 1) - Version: 6.1.7601 (x64))
Document Lastmod2016-03-28 14:50:31
Document TitleUser Manual

www.getcoros.com
General Safety, Use and Care
Please charge it with the phone charging adapter.
Please install the controller properly before use .
The product can realize online upgrade via dedicated COROS Application. Do not cut off the
power or force the product off in the course of upgrading, otherwise, it might lead to booting
failures .
This helmet is waterproof.
No attachments should be added to the helmet except those recommended by the
manufacturer.
Tips
When the helmet is not in use for a long time, please charge it from time to time to ensure its
battery life.
Maintenance
Helmet can be seriously damaged by substances such as petrol, paint, adhesives or cleaning
agents. The damage sometimes may be invisible. Clean it with mild soap and water only.
Storage
Keep the helmet far away from high temperatures as the shell might be damaged when the
environmental temperature surpasses 65.5 degrees. In hot days, please do not place the
helmet in vehicles of dark colors or in tightly sealed sacks where the temperature is easy to
rise up and thus may cause damage to the helmet. Please abandon use of helmet if it is
deformed .
Make the helmet clean & dry after use and keep it in a box and then place it where it is dry
and ventilated.
About COROS Helmet
Just via simple settings, COROS helmet can be transformed to an intelligent helmet
Indicating light
Micro USB interface
Power key
Bone conduction headset
Microphone
Features
Voice navigation
Music Player
Ride Data Acquisition
Walkie and talkie
Receiving calls
Use COROS Helmet
Quick Charge
To charge the helmet, please open the Micro USB protective cover first at the back of the
helmet, and then plug the data line in the Micro USB interface.
Note: indication of charging status is as below
Red light
Indicating light
Function definition
Green light
Always On
Slow flashing
Always On
Charging
Low battery
Charge Completed
Starting up
Before initial use of the helmet, please wake it up via charging.
When you open the protective cover at the back of the helmet, you can see interfaces as
indicated in the chart right side, press the power key and you can see the green light on which
indicates the helmet has been successfully turned on.
Note: key-press modes and functions of indicating light described as below:
Function
definition
Key-press modes
Press
Press and hold Press and hold
for 3 seconds for 7 . 5 seconds
Indicating light
Green
Red
Blue
Booting
Wake up
Shutdown
Reset
Slow
flashing
Working status
Non-working status
Slow
flashing
Quick Settings
1) Bluetooth pairing After powering on the
helmet, turn on Bluetooth in your phone to
enter the Bluetooth Pairing interface, find
OTHER DEVICES, and select Coros Helmets
CMC C
Settings
11 : 12
92%
Bluetooth
Bluetooth
Now discoverable as " Jack " .
MY DEVICES
Coros Helmets
OT HER DEVICE S
Car - YaoBin
Car - YaoBin2
Connected
1)Download the Coros Helmet APP
The product supports only iOS 7.0 and above.
Option 1: Search and Download>
Option 2: Scan Quick Response code >
Search and find the appliation Coros Helmet
in Apple Store, download it and save it
directly in your phone
Co ro sH elmet
3)Connect to COROS smart devices
Run the application Coros Helmet , select corresponding
smart devices under the Device List.
CM CC
11 : 12
Device List
BLE EF272B
10
92 %
4)Match the controller
Tap on Controller under Device interface to enter the
Match interface, tap on Match and then press and hold
any key on the controller until the SUCCESS MATCH
popup.
11
Installing the controller
Prepare the controller holder and the rubber rings
well, and then find a proper location from the bicycle
handlebar.
rubber rings
Make the rubber rings diagonal to fix the controller
holder onto the handlebar as Chart B indicated, after
the fixing completed, it should be look like as shown in
Chart C.
Fit the controller into the holder as shown in Chart D.
12
Note: key press modes and corresponding functions described as below.。
Icons
Key-press
Functions
mode
Click
Answer / hang up; Turn on / off walkie and talkie
Click
Turn On/Pause the Music Player; Volume increase for phone calls or
walkie and talkie; Mute incoming calls
Next Track;Volume decrease for phone calls or walkie and talkie; Mute
incoming calls
Click
13
5)Optional accessories
The walkie and talkie is an optional accessory, please choose it based on your own need.
A.Startup the walkie and talkie
The icon
(Icon 3) is power key, press and hold it for 2s to turn
on the device
B.Match the walkie and talkie
Press and hold the icon
pairing status.
(Icon 4) to enter the Bluetooth
C. Frequency Adjusting
Rotate the band knob (Icon 2) and select team channel to
realize talkback.
D.Charging the walkie and talkie
Open the USB cover(Icon 5) and charge the interphone via
Micro USB.
14
Indicator
Note: keys,key-press durations and corresponding functions described as below.
K eys
Functio n definition
Power key
Indicating light
Bluetooth key
Press and
Press and hold
Press and hold
hold for 2s
for 5s
for 2s
Charging
Power on
Power off
Green
Red
Chargecomp leted
Ch arging
On for 2s
Enter Bluetooth
pairing
Blueto oth pairing
Green and red lights flash alternatively when pairing, green light turns
on for 3s when pairing completed
Low battery
Quick flas hing( battery level<20%,
in dication
Working status
Abn ormal wo rking
status
Talkback
f lash for 60s and cycle every 600s)
Slow flashing
Quick flashing
Normally on( receiving the
intercom signal )
No rmall y on(transmit s ignal)
15
Warranty
COROS warrants to the original purchaser of this product that the product is free of defects in
materials and workmanship for a period of one year from the original date of purchase. This
warranty does not apply to defects of physical damage resulting from abuse, neglect,
improper repair, improper fit, alterations, or use unintended by the manufacturer.
If your COROS helmet is found to be defective in materials or workmanship within one year
from the date of purchase, COROS or the country distributor will at its sole option either
repair or replace the product free of charge. Just take it to your retailer, with a letter indicating
the specific reasons you are returning the helmet, and proof of date of purchase. The retailer
will then evaluate the claim. COROS does not warranty any helmet damaged due to heat or
contact with solvents.
This warranty does not affect your statutory rights.
This warranty is in lieu of all other agreement and warranties, general or special, express or
implied and no representative or person is authorized to assume liability on behalf of COROS
in connection with the sale or use of this product.
16
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
www.getcoros.com

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Create Date                     : 2015:12:22 13:28:40+08:00
Modify Date                     : 2016:03:28 14:50:31+08:00
Metadata Date                   : 2016:03:28 14:50:31+08:00
Producer                        : doPDF Ver 7.3 Build 391 (Windows 7 Business Edition (SP 1) - Version: 6.1.7601 (x64))
Format                          : application/pdf
Document ID                     : uuid:f3aa1788-6b26-45b5-9535-2828ca09331c
Instance ID                     : uuid:547cb82d-6061-4d20-9bc9-fb117e55e87f
Page Layout                     : OneColumn
Page Mode                       : UseNone
Page Count                      : 20
EXIF Metadata provided by EXIF.tools
FCC ID Filing: YNGHA01-001

Navigation menu