Dorel Juvenile Group 08401T Transmitter Portion of the Baby Unit User Manual 08041 Quick Connection

Download:
Mirror Download [FCC.gov]
Document ID	372763
Application ID	97wLaevktoPO7AP9Mpb7+A==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	53.6kB (670057 bits)
Date Submitted	2003-11-12 00:00:00
Date Available	2003-11-12 00:00:00
Creation Date	2003-10-09 11:26:52
Producing Software	Acrobat Distiller 4.05 for Macintosh
Document Lastmod	2003-10-16 09:52:18
Document Title	08041 Quick Connection
Document Creator	QuarkXPressª: LaserWriter 8 8.5.1
Document Author:	JTower

08041 Quick Connection 10/9/03 11:25 AM Page 1
Quick Connection
Two Way Monitor System
08041
User Guide
Questions? Comments?
Missing Parts? Contact Us:
www.safety1st.com
(800) 544-1108
©2003 Dorel Juvenile Group
Made in CHINA
www.safety1st.com
(800) 544-1108
Styles and colors may vary.
Distributed by Dorel Juvenile Group, Inc.,
2525 State Street,
Columbus, IN 47201-7494
In Canada: 12345 Albert-Hudon, Suite
100, Montreal-N, QC Canada H1G 3K9
10/03
08041 Quick Connection 10/9/03 11:25 AM Page 2
WARNING
PLEASE READ THE FOLLOWING WARNINGS AND ALL ASSEMBLY
INSTRUCTIONS CAREFULLY BEFORE USING THE QUICK
CONNECTION TWO WAY MONITOR. KEEP THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
TERMS USED IN WARNINGS: The term “Receiver” corresponds to “Parent
Unit” and the term “Transmitter” corresponds to “Child Unit” in the rest of this
instruction booklet.
• The Quick Connection Two Way Monitor is not intended to replace
responsible and proper parental supervision.
• Check your child’s activity at regular intervals as this monitor will not alert
parents to the silent activities of a child.
• Before using your Quick Connection Two Way Monitor:
- Read and follow all instructions carefully.
- Read and observe all warnings on the product and in this
instruction booklet.
• To prevent entanglement with the adapter cord, NEVER place the
cord in or near a crib or playpen. DO NOT place the Receiver anywhere its
AC adapter cord are within reach of children.
• ALWAYS KEEP THE TRANSMITTER, RECEIVER AND AC ADAPTERS
OUT OF REACH OF CHILDREN.
• This product is not intended to be used as a medical monitor and its
use should not replace adult supervision. It is important that an adult
stay within the viewing range of the Quick Connection Two Way Monitor at
all times during use.
• It is essential to check reception regularly. Please see the Testing
Reception section for complete instructions.
• The Receiver is intended for indoor use only.
• NEVER use the Transmitter or Receiver near water. For example, do not
use near a bathtub, bathroom sink, laundry tub, kitchen sink, in a wet
basement, etc.
• Always unplug the AC adapters from wall outlets during long periods
of non-use.
• Position the Transmitter, Receiver and AC adapters to allow adequate
ventilation and prevent these components from overheating.
• To prevent overheating, keep the Transmitter, Receiver and AC adapters
away from heat sources such as radiators, heat registers, stoves or other
appliances (including amplifiers) which produce heat. Also keep these
components out of direct sunlight.
• Use only the AC adapters provided. Use of any other adapters may
damage the Transmitter and/or Receiver. Plug the AC adapters into
standard household current only (120V AC outlet)! To prevent
entanglement and overheating, DO NOT use extension cords.
• The AC adapters may become slightly warm to the touch during operation.
This is normal.
• Position the AC adapter cords so that they are not walked on or pinched by
items placed upon or against them, paying particular attention to cords at
AC adapter plugs, wall plugs, and the point at which the cords attach to the
Transmitter and Receiver.
08041 Quick Connection 10/9/03 11:25 AM Page 3
• This product should be serviced only by qualified service personnel at
Dorel Juvenile Group when:
- An AC adapter or its plug is damaged,
- The Transmitter or Receiver have fallen,
- Liquid has spilled into the Transmitter or Receiver or
- The Transmitter or Receiver do not appear to operate normally or exhibit a
marked change in performance
• DO NOT attempt to service this product beyond that described in the
Troubleshooting section at the end of these instructions. All other servicing
should be referred to qualified personnel at Dorel Juvenile Group.
NOTE: The LEDs emit IR (infra red) light that is not harmful.
CAUTION
TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER OR
BACK OF TRANSMITTER. NO SERVICEABLE PARTS INSIDE. REFER SERVICING TO
DOREL JUVENILE GROUP CONSUMER RELATIONS (800) 544-1108.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS
PRODUCT TO WATER OR MOISTURE. NEVER ATTEMPT TO OPEN THE CASE OF THE
PRODUCT. THIS IS DANGEROUS AND WILL VOID THE WARRANTY.
FCC Compliance Information
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Re-orient or relocate the receiving antenna,
• Increase the separation between the equipment and receiver,
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected,
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
WARNING: Changes or modifications to this unit not expressly approved by
Dorel Juvenile Group could void the user’s authority to use the equipment.
08041 Quick Connection 10/9/03 11:25 AM Page 4
Parts List
A Parent Unit
B Child Unit
C AC Adapter (2)
Keep These Instructions for Future Use
• Lay out and identify all parts.
• Do not return this product to the place of purchase. If any parts are missing, or if you
are having difficulty using product visit our web site at www.safety1st.com. Or call
Consumer Relations at (800) 544-1108. Have the model number (08041) and date
code (manufacturing date) ready before you call. The date code is located on the
bottom of the Child Unit.
08041 Quick Connection 10/9/03 11:25 AM Page 5
Installing Your Quick Connection Two Way Monitor
To Set Up Your Child Unit:
WARNING
• To prevent entanglement, only mount the Child Unit in a location where it
and its AC adapter cord are OUT OF REACH OF CHILDREN.
• DO NOT mount the Child Unit directly above heating vents, other heat
producing sources or in direct sunlight.
• To prevent entanglement and overheating, NEVER use an extension cord.
1. Locate the Child Unit and its AC
adapter. Connect the AC adapter
into the back of the Child Unit.
Child Unit
CAUTION: DO NOT use an adapter
that did not come with this product.
AC Adapter
2. Wrap the excess cord onto built in
cord shortener (Figure 2). Allow
enough cord to reach the outlet
and connect the AC adapter into a
power outlet. Allow the cord to exit
the hole and close the door.
Door
2a
Cord
Exit
08041 Quick Connection 10/9/03 11:25 AM Page 6
Installing Your Quick Connection Two Way Monitor
To Set Up Your Parent Unit:
CAUTION
• When using batteries, check batteries regularly. Amber LED indicates the
batteries are low. DO NOT rely on Parent Unit when batteries are low.
NOTE: The Parent Unit may use either
the AC adapter or batteries. When
plugged in, the AC adapter will be the
source of power.
Parent Unit
1. For AC Power Use: Locate the
Parent Unit and its AC adapter.
Connect the AC adapter into the side
of the Parent Unit. Connect the AC
adapter into a power outlet (Figure1).
AC Adapter
CAUTION: DO NOT use an adapter
that did not come with this product.
For Battery Use: Locate the center
screw at the back of the Parent
Unit. Unscrew the screw. Pull off
the battery door and insert three
AAA batteries (see positive and
negative diagram on the Parent
Unit). Secure the door with the
screw (Figure 1a).
NOTE: If desired, slide the belt clip
over your belt.
1a
Battery Door
Screw
3 AAA
Batteries
Choose a Location:
IMPORTANT: When choosing a location to set up your Child Unit and Parent Unit
follow these guidelines:
up to 1000'
• For best sound quality place the Child
Unit 4 to 6' (1.5 to 2 m) away from
the child.
• Use the Parent Unit far enough
away from the Child Unit so as not
to get feedback.
• DO NOT use the Parent Unit more
than 1000' (304.8 m) away from
the Child Unit.
Parent Unit
Child Unit
08041 Quick Connection 10/9/03 11:25 AM Page 7
Operating Your Quick Connection Two Way Monitor
To Use Your Child Unit and Parent Unit:
1. Turn the Parent Unit and the Child
Unit to the On position. Choose a
channel. Be sure that the same
channel is selected on both the Child
Unit and the Parent Unit.
On/Off
Volume
Control
On/Off
Control
Channels Must Match
If desired, turn the vibrate feature
on. Vibrate overrides sound,
therefore no sound will be heard
when vibrate is on.
2. Adjust the volume by turning the
knob on the side of the Parent
Unit. To talk, press and hold the
talk button. Release button to
listen.
Talk
Control
On/Off
Volume
Control
On/Off
Vibrate
CAUTION: Test the Parent Unit
before each use. It is essential to
check reception regularly.
IMPORTANT: The first time you use
your Child Unit, go through the section
“Test the Reception” with two adults.
08041 Quick Connection 10/9/03 11:25 AM Page 8
Operating Your Quick Connection Two Way Monitor
To Test the Reception:
5 Sound Lights
(LEDs)
NOTE: It is essential to check
reception regularly.
Louder
noise
On/Off
Volume Control
1. Place the Child Unit 4 to 6'
(1.5 to 2m) away. Have an adult
speak into the Child Unit at
various levels (soft to loud)
while another adult checks the
Parent Unit for the proper
sound and reception (Figure 1).
Turn vibrate to the On position
and test the vibrate feature.
Press the talk and hold the talk
control and your voice will be
heard on the Child Unit. Try the
Parent Unit in every location
that it will be used. It is best to
follow these guidelines for good
reception:
Vibrate Control
Range Indicator:
Green = good
connection
Red = poor
connection
Talk Control
2 Channels
Power On/Low Battery
Indicator:
Green = Power On
Amber = Low Battery
Guidelines for Good Reception:
• Place your Child Unit 4 to 6' (1.5 to 2m) away from the child.
• Be certain the Parent Unit and Child Unit are set on the same channel.
• Have one adult speak (from a whisper to a yell) into the microphone on the front of
the Child Unit while another checks the volume and the sound LEDs on the Parent
Unit. The more noise your baby makes, the more sound lights will illuminate (Figure 1).
• Adjust the volume to a comfortable level for your environment.
• Use the Parent Unit far enough away from the Child Unit so as not to get
feedback.
• Do not place the Parent Unit more than 1000' (304.8 m) away from the Child Unit.
• If one channel has poor reception try the other channel.
NOTE: It is possible for the Parent Unit to pick up sounds or interference from
other signal producing devices including other audio or video monitors which
broadcast in the 900 MHz range. To minimize this potential problem, two
independent channels have been provided.
If you experience interference while using one channel setting, simply switch the
Parent Unit and Child Unit to another channel. Selecting a channel is usually a onetime adjustment. If interference persists on both channels, please refer to the
Troubleshooting section at the end of these instructions.
CAUTION: To protect your privacy, always turn the Child Unit off when not in use.
Always remember that you are using public airwaves. Sound may be broadcast to
other receiving devices. Conversations, even from rooms near by, may be broadcast.
08041 Quick Connection 10/9/03 11:25 AM Page 9
Troubleshooting
Problem
Parent Unit’s power indicator
does not illuminate
Possible Cause
Parent Unit is not turned on
Batteries are dead/
Power is turned off
Solution
Slide the button on the side of
Parent Unit to the on position
Make certain that any light switches
that control the power flow to the
wall outlet are on (when using AC)
Make certain that house fuses
and circuit breakers are on (when
using AC)
Parent Unit has no sound
AC Adapter not properly
connected
Check AC Adapter jack-to-socket
and plug-to-outlet connections
Volume not turned up
Adjust the volume control on the
Parent Unit
Check the channel switches on
the Child Unit and Parent Unit to
confirm they are on the same
channel (I or II)
Try the other channel
Turn the Child Unit and Parent
Unit off, wait a moment then
turn them back on
Bring Parent Unit closer to Child
Unit
Test reception by moving the
Child Unit to different locations
throughout the house
Channel switches are not on the
same setting (I or II)
Signal interference due to
monitors, cellular or cordless
telephones, etc.
Out of range
Child Unit near metal
concentration
Audio feedback (squealing)
Child Unit is too close to the
Parent Unit
Move the Child Unit further
away from the Parent Unit
Lower the volume on the Parent
Unit
Parent Unit not functioning or
static or power LED is amber
Batteries are low
Wrong AC adapter used
Not within 1000' (304.8 m)
range
Vibrate feature / talk feature not
working
If amber LED lights or no LED
at all, change the batteries
If you are not using batteries, be
certain that you are using the
correct AC adapter
Move closer to the Child Unit
Batteries are low
Change the batteries
Vibrate not switched to On
position / talk button not held
down while talking
Not within 1000' (304.8 m)
range
Turn vibrate On / hold down
talk button while you talk; let go
to listen
Move closer to the Child Unit
NOTE: Do not return this product to the place of purchase. If you are having difficulty
using product visit our web site at www.safety1st.com or contact Consumer
Relations at (800) 544-1108.
08041 Quick Connection 10/9/03 11:25 AM Page 10
One-Year Limited Warranty
Dorel Juvenile Group, Inc. warrants to the original purchaser that this product
(Quick Connection Two Way Monitor), is free from material and workmanship
defects when used under normal conditions for a period of one (1) year from the
date of purchase. Should the product contain defects in material or workmanship
Dorel Juvenile Group, Inc., will repair or replace the product, at our option, free of
charge. Purchaser will be responsible for all costs associated with packaging and
shipping the product to Dorel Juvenile Group Consumer Relations Department at
the address noted below and all other freight or insurance costs associated with the
return. Dorel Juvenile Group will bear the cost of shipping the repaired or replaced
product to the purchaser. Product should be returned in its original package
accompanied by a proof of purchase, either a sales receipt or other proof that the
product is within the warranty period. This warranty is void if the owner repairs or
modifies the product or the product has been damaged as a result of misuse.
This warranty excludes any liability other than that expressly stated previously,
including but not limited to, any incidental or inconsequential damages.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION
OR EXCLUSION MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY
ALSO HAVE OTHER RIGHTS THAT MAY VARY FROM STATE TO STATE.
10

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2003:10:09 11:26:52Z
Modify Date                     : 2003:10:16 09:52:18+08:00
Page Count                      : 10
Creation Date                   : 2003:10:09 11:26:52Z
Producer                        : Acrobat Distiller 4.05 for Macintosh
Author                          : JTower
Mod Date                        : 2003:10:16 09:52:18+08:00
Metadata Date                   : 2003:10:16 09:52:18+08:00
Creator                         : JTower
Title                           : 08041 Quick Connection

EXIF Metadata provided by EXIF.tools