Dorel Juvenile Group 49240T 40 Channel Intercom/Monitor User Manual FCC statements

Dorel Juvenile Group 40 Channel Intercom/Monitor Users Manual FCC statements

Users Manual + FCC statements

Safety 1st®Grow-With-Me Intercom MonitorOwner’s GuideNo. 49240IntroductionThank you for purchasing the Safety 1st Grow-With-Me Intercom Monitor. This is amultifunctional, state-of-the-art monitor that features a convenient intercom mode thatallows two way communication between the parent’s unit and the baby’s unit. Thisunique monitor allows you to soothe baby with your voice and communicate directlyback and forth as the child grows older, thus offering you years of extended use.The baby’s unit has continuous transmission that sends your baby’s sounds to theparent’s unit. The parent’s unit contains a talk switch with a lock-out feature forparental control, thus providing complete 2-way communication. By using 900MHztechnology, these units provide superior clarity with an extended range of up to 1000 feet.The baby’s unit can also be simply converted to a fully portable toddler unit by removingit from its base and easily clipping it to the child’s clothing. Both units feature unique“rubberized” bases that allow them to placed on dresser tops and counters more securely.The parent’s unit may be clipped to a belt for additional mobility, and utilizes and audioand visual alarm to indicate signal loss. The units have 4 channels to minimize outsideinterference and offer additional privacy.The parents’ unit may be used with AC power or with 4 AAA batteries (not included) forportability. The baby’s detachable transmitter is recharged from its AC powered base,providing hours of continuous portable use.We are sure that you will find the Grow-With-Me Intercom Monitor convenient and easyto use. to insure that you benefit from all of the great features that your monitor offers,and to make sure that you use it properly, we urge you to:PLEASE READ all instructions carefully before using this product and keep theseinstructions for future reference. If you have any questions, please call our consumerrelations number at (800) 721-3389CAUTION:• THE GROW-WITH-ME INTERCOM MONITOR IS NOT INTENDED TOREPLACE RESPONSIBLE AND PROPER PARENTAL SUPERVISION.• YOU SHOULD CHECK YOUR CHILD’S ACTIVITY AT REGULAR INTERVALSAS THIS MONITOR WILL NOT ALERT PARENTS TO THE SILENT ACTIVITIESOF A CHILD.
WARNING: Changes or modifications to this unit not expressly approved by Safety 1st,Inc. could void user’s authority to use equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the followingtwo conditions: (1) This device may not cause harmful interference, and (2) this devicemust accept any interference received, including interference that may cause undesiredoperation.Safety Instructions(caution flags/graphics)WARNING: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVECOVERS.NO SERVICEABLE PARTS INSIDE.REFER TO SAFETY 1ST CONSUMER RELATIONS: (800) 723-3065.WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOTEXPOSE THIS PRODUCT TO WATER OR MOISTURE.NEVER TOUCH THE END OF THE ADAPTER CORD WHEN THE ADAPTER ISPLUGGED INTO AN ELECTRICAL OUTLET.READ INSTRUCTIONS: All the safety instructions should be read before the Grow-With-Me Intercom Monitor is operated.RETAIN INSTRUCTIONS: The safety instructions should be retained for futurereference.HEED WARNINGS: All warnings on the Grow-With-Me Intercom Monitor andoperating instructions should be adhered to.FOLLOW INSTRUCTIONS: All operating instructions should be followed.WATER AND MOISTURE: The Grow-With-Me Intercom Monitor should not be usednear water, for example, near a bath tub, wash bowl, kitchen sink, laundry tub, in a wetbasement, near a swimming pool, etc.VENTILATION: The Grow-With-Me Intercom Monitor should be placed so that itslocation does not interfere with proper ventilation of the unit. For example, it shouldnever be situated on a bed, sofa, rug or similar surface that may block ventilation.HEAT: The Grow-With-Me Intercom Monitor should be kept away from heat sourcessuch as radiators, heat registers, stoves or other appliances that produce heat.AC POWER SOURCE: The Grow-With-Me Intercom Monitor should be connected onlyto the AC adapters supplied with the unit.POWER CORD PROTECTION: The power supply cord should be routed so that it is notlikely to be walked on or pinched by items placed upon or against it. Pay particularattention to the cord at the plug, convenience receptacle, and at the point it exits from theAC adapters.CLEANING: Use a dry cotton cloth to keep the 2-Way Grow-With-Me Monitor freefrom dust. Do not use water!
NON-USE PERIODS: The power cords of the Grow-With-Me Intercom Monitor shouldbe unplugged from the outlet when unused for long periods of time. The batteries shouldalso be removed during these periods.OBJECT AND LIQUID ENTRY: Care should be taken so that objects do not fall ontothe product, and liquids are not spilled into the enclosure through the openings.DAMAGE REQUIRING SERVICE: The Grow-With-Me Intercom Monitor should beserviced by qualified personnel when: A: The power supply cord or plug has been damaged. B: Objects have fallen or liquid has been spilled onto the product. C: The Monitor has been exposed to rain. D: The Monitor does not appear to operate normally or exhibits a marked change in itsperformance. E: The Monitor has been dropped or the enclosure damaged.THE USER... CHILD.ContentsParent’s Unit (Receiver)Baby’s Unit with detachable portable toddler’s unit (Transmitterr)Rechargeable battery (included with portable toddler’s unit)(2) AC Adapters(LD 0f: separated baby unit; parent unit; two AC adapters; rechargeable battery)Batteries Required (Optional)(4) AAA alkaline batteries (not included)Features and Components - Parent’s unit1 Power/Volume Dial2 Channel Switch3 Talk/Talk-Lock-out Buton4 Power/Low Battery Indicator5 Sound Lights/Audio-Visual Out-Of-Range Alarm6 Antenna7 Speaker8 Microphone9 AC Adapter Jack10 Belt Clip11 Keyhole for optional wall mounting12 Battery Compartment (4 - AAA)
(LD of parent’s unit: front, left side, right side, back)Parent’s Unit (Receiver)1 2 3 4 5 6 7 8 9 10 11 12Features and Components - Baby’s Unit1 Antenna2 Power/Low Battery/Recharging Indicator3 Detachable Portable Toddler Unit4 Base Unit5 Speaker6 Microphone7 Child-resistant Clothing Clip8 AC Adapter Jack9 Channel Selector (Inside Rechargeable Battery Compartment)10 Recharge Battery Compartment11 Rechargeable Battery12 LED Power Indicator (Base Unit)(LD of Child’s unit: assembled front; detached fronts; assembled back; portabletransmitter back)Baby’s Unit (Transmitter)1 2 3 4 5 6 7 8 9 10 11AC AdaptersThe AC Adapters are a low voltage power source that allows you to use your householdelectricity to run the Parent’s and Baby’s Units. They connect to the AC Adapter Jacks inthe Parent’s Unit and the Baby’s Base Unit, and plug into any standard electrical outlet inyour home.CAUTION: These adapters were made with a specific design for Safety 1st Grow-With-Me Intercom Monitor. They cannot be used with any other appliance. Never use adifferent type of adapter with this monitor.WARNING: Never touch the end of the adaptor cord when the adaptor is plugged into anelectrical outlet.(LD of AC Adapter)
AC AdapterOperating Your Grow-With-Me Intercom MonitorFollow these instructions to operate your Grow-With-Me Intercom Monitor. Referencethe illustrations on pages 2 & 3 for the location of all features described in theseinstructions.Baby’s Unit:For best results, place the Baby’s Unit on a table near the crib or bed. It should be facingthe baby’s head as close to the crib as possible, but out of baby’s reach.STEP 1 Plug the round end of adapter cord into the jack on the Baby’s base unit, thenplug the the adapter into an electrical outlet . The LED Light on the Base should beilluminated and solid green and the LED Light on the detachable toddler unit should beilluminated and a solid green (if fully recharged). LED indicator will be solid red iftoddler unit is recharging.STEP 2 Remove the battery compartment door on the back of the baby’s Base unit.Select one of the four channel options. If you experience static or noise interferenceselect one of the remaining three channels and note your selection on a separate piece ofpaper. Replace the Battery compartment door.STEP 3 As baby grows older and mobile detach portable toddler unit fom Base Unit asshown.(LD of hand separting pieces)STEP 4 Using Child Resistant Clip on back of portable toddler unit, attach to baby’sclothing as shown.(LD of hand attaching monitor to clothing)STEP 5 Portable toddler unit normally blinks green when it is out of its base. Afterseveral hours of continuous use the LED Light on the portable toddler’s unit will blinkred, indicating low battery-needs recharging. Return toddler’s unit to Base Unit. Whenreattached and switched ON, LED on portable toddler’s unit will glow solid green. WhenBase Unit is switched OFF, LED will change to solid red, indicating recharging inprogress. Overnight recharging is recommended. The portable toddler’s unit may now bere-separated from the Base Unit and reattached to baby’s clothing.STEP 6 After sustained use and numerous recharging cycles, the recharge-able batteriesmay need to be replaced. Remove screw from Rechargeable Battery Compartment coveron back of Base Unit; remove cover.
(LD of batter screw/door being removed)STEP 7 Remove Rechargeable battery and unclip power source wire asshown. Take battery to store with you to assure a correct battery selectionwhen purchasing a replacement(LD of Battery clip being separated)STEP 8 Reattach new battery power source wire to Base unit power sourceclip as shown.(LD of Battery clip being reattached)STEP 9 Replace Rechargeable Battery Compartment Door and resecure screw.(LD of batter screw/door being resecured)Parent’s Unit:For best results, the Parent’s Unit should be placed at least 10 feet awayfrom the Baby’s unit. The Parent’s Unit can be mounted to the wall by usinga screw (not included) to hang the unit using the keyhole on the belt clip onthe back of the unit.STEP 1 Select Channel to correspond to Channel on Baby’s Unit.STEP 2 Place the Parent’s Unit at least 10 feet from the Baby’s Unit.STEP 3 Plug the adapter into an electrical outlet, then plug the round end ofthe adapter cord into the jack on the Parent’s Unit. Turn the Unit on and setan appropriate volume level to hear baby at all times. The power-on LED Light on theUnit should be illuminated and solid green. Note: If using optional 4 AAA batteries (notincluded) for power, power-on LED will glow solid red when batteries need replacing.STEP 4 For optional battery power, do not attach AC Adapter. Slide theBattery Door open in the direction of the arrow and insert 4 AAA batteries(not included). Ensure the (+) and (-) symbols match those shown in battery compartmentas shown.(LD of battery insertion)Using Intercom FeatureSTEP 1 To let baby hear your voice, press Talk Button and speak directly into themicrophone.
STEP 2 Release Talk Button to hear bab’s response or to monitor soundsSTEP 3 To lock out Talk Button from unsupervised use, slide button up asshown. This prevents anyone from talking to the baby unit.Note: If you experience static or noise interference, switch both units to analternate channel.(LD of button operation for lock-out)Note: If you experience a power failure, the Parent’s Unit and the Baby’sUnit will not automatically switch to battery power. You must disconnect theAC Adapters from the Parent’s and the Baby’s Unit. You must separate theBaby’s Portable Monitor from the Base unit to use the rechargeable batterypower and you must insert 4 AAA batteries (not included) into the Parent’sunit for battery power.LED SOUND LEVEL LIGHT INDICATORS/AUDIO-VISUAL ALARM INDI-CATORSThe five (5) RED LEDs at the top of the Parent’s Unit light up to display thesound level coming from your baby. These sound level indicators are facto-ry pre-set andare not affected by the volume setting. This feature allowsyou to view the relative volume level of your baby’s sounds. It is most effec-tive whenyou are in a noisy environment and may not be able to hear yourbaby’s sounds clearly. The louder the sound, the more RED LEDs will lightup.These RED LEDs, along with the Speaker, also serve as a loss of signalalarm. When the Parent’s unit is too far from the Baby’s Unit for monitoring,the LEDs will flash and the Speaker will give off an audible alarm. Do Notuse this feature as a “seek” function to locate your child.Operating Tips• Make sure that both units are on the same channel. Even though you mayhear your baby’s sounds, proper use of this system requires that both unitsmust be on the same channel. If the units are on different channels, the sig-nalsfrom theBaby’s Unit may be strong enough to be picked up by theParent’s Unit, but these signals are unreliable and may contain substantialstatic.•When using the AC Adapters with household electricity, make sure the out-let haspower. Some electrical outlets are powered through a wall switch inthe room. If both Units are plugged in and”ON” , the Power indicator LEDs
should be lit. If this does not take place, try placing the wall switch in theroom in another position.Troubleshooting Your Grow-With-Me Intercom MonitorProblem Possible cause SolutionWarrantyONE (1) YEAR LIMITED WARRANTYSafety 1st... WARRANTY.If you have questions or comments, please call our toll free Consumer Relations number.All Safety 1st products are guaranteed. If you are not completely satisfied, please returnwith proof of purchase to:Safety 1st, Inc., 45 Dan Road, Canton, MA 02021 USA 800-723-3065©1999 Safety 1st, Inc. Safety 1st Canada, Inc., 804 rue Deslauriers, Ville St-Laurent, Quebec H4N1X1 Canada800-721-3389Safety 1st Europe, Ltd. Isopad House, Shenley Road, Borehamwood, HertfordshireWD61TE Great Britan +44(0) 20 8236 070710/99

Navigation menu