Dorel Juvenile Group 49242T Premium Privacy Baby Monitor User Manual

Dorel Juvenile Group Premium Privacy Baby Monitor Users Manual

Users Manual

Safety 1st®900 MHz Premium Privacy Link MonitorOwner’s GuideNo. 49242IntroductionThank you for purchasing the Safety 1st 900 MHz Premium Privacy Link Monitor. Thisdependable monitor allows you to hear your baby’s sounds and activities, while thepatented Voice Encryption Technology helps to keep outsiders from tuning into yourcommunications for maximum privacy.The baby’s unit sends a continuous transmission of your baby’s sounds to the parent’sunit. The parent’s unit is pager sized for easy mobility, and features both sound and lightsto monitor your baby’s activities. By using 900MHz technology, these units providesuperior clarity with an extended range of up to 1000 feet. Both units feature unique“rubberized” bases that allow them to placed on dresser tops and counters more securely.The parent’s unit may be clipped to a belt for additional mobility, and utilizes and audioand visual alarm to indicate signal loss. The units have 4 channels to minimize outsideinterference and the Premium Privacy Link Monitor sends and receives encrypted audiosignals that only it can decode. All other monitors or scanners will hear nothing butsilence.The parents’ unit may be used with AC power or with a rechargeable battery pack(included) for portability. The baby’s transmitter is AC powered, or can also be used withone 9 volt battery (not included) for maximum portabliliy.We are sure that you will find the 900 MHz Premium Privacy Link Monitor convenientand easy to use. to insure that you benefit from all of the great features that your monitoroffers, and to make sure that you use it properly, we urge you to:Please read all instructions carefully before using this product and keep these instructionsfor future reference. If you have any questions, please call our consumer relations numberat (800)723-3065. In Canada please call (800)721-3389.CAUTION:• THE 900 MHz Premium Privacy Link Monitor IS NOT INTENDED TO REPLACERESPONSIBLE AND PROPER PARENTAL SUPERVISION.• YOU SHOULD CHECK YOUR CHILD’S ACTIVITY AT REGULAR INTERVALSAS THIS MONITOR WILL NOT ALERT PARENTS TO THE SILENT ACTIVITIESOF A CHILD.WARNING: Changes or modifications to this unit not expressly approved by Safety 1st,Inc. could void user’s authority to use equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the followingtwo conditions: (1) This device may not cause harmful interference, and (2) this devicemust accept any interference received, including interference that may cause undesiredoperation.Safety Instructions(caution flags/graphics)WARNING: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVECOVERS.NO SERVICEABLE PARTS INSIDE.REFER TO SAFETY 1ST CONSUMER RELATIONS: (800) 723-3065.WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOTEXPOSE THIS PRODUCT TO WATER OR MOISTURE.NEVER TOUCH THE END OF THE ADAPTER CORD WHEN THE ADAPTER ISPLUGGED INTO AN ELECTRICAL OUTLET.READ INSTRUCTIONS: All the safety instructions should be read before the 900 MHzPremium Privacy Link Monitor is operated.RETAIN INSTRUCTIONS: The safety instructions should be retained for futurereference.HEED WARNINGS: All warnings on the 900 MHz Premium Privacy Link Monitor andoperating instructions should be adhered to.FOLLOW INSTRUCTIONS: All operating instructions should be followed.WATER AND MOISTURE: The 900 MHz Premium Privacy Link Monitor should not beused near water, for example, near a bath tub, wash bowl, kitchen sink, laundry tub, in awet basement, near a swimming pool, etc.VENTILATION: The 900 MHz Premium Privacy Link Monitor should be placed so thatits location does not interfere with proper ventilation of the unit. For example, it shouldnever be situated on a bed, sofa, rug or similar surface that may block ventilation.HEAT: The 900 MHz Premium Privacy Link Monitor should be kept away from heatsources such as radiators, heat registers, stoves or other appliances that produce heat.AC POWER SOURCE: The 900 MHz Premium Privacy Link Monitor should beconnected only to the AC adapters supplied with the unit.POWER CORD PROTECTION: The power supply cord should be routed so that it is notlikely to be walked on or pinched by items placed upon or against it. Pay particularattention to the cord at the plug, convenience receptacle, and at the point it exits from theAC adapters.CLEANING: Use a dry cotton cloth to keep the 900 MHz Premium Privacy LinkMonitor free from dust. Do not use water!NON-USE PERIODS: The power cords of the 900 MHz Premium Privacy Link Monitorshould be unplugged from the outlet when unused for long periods of time. The batteriesshould also be removed during these periods.
OBJECT AND LIQUID ENTRY: Care should be taken so that objects do not fall ontothe product, and liquids are not spilled into the enclosure through the openings.DAMAGE REQUIRING SERVICE: The 900 MHz Premium Privacy Link Monitorshould be serviced by qualified personnel when: A: The power supply cord or plug has been damaged. B: Objects have fallen or liquid has been spilled onto the product. C: The Monitor has been exposed to rain. D: The Monitor does not appear to operate normally or exhibits a marked change in itsperformance. E: The Monitor has been dropped or the enclosure damaged.THE USER... CHILD.ContentsParent’s Unit (Receiver)Baby’s Unit (Transmitter)Rechargeable battery pack (pre-installed in parent’s unit)(2) AC Adapters(LD 0f: baby unit; parent unit; two AC adapters; rechargeable battery pack)Battery Required (Optional)One 9 volt alkaline battery (not included) for Baby’s UnitFeatures and Components - Parent’s unit1 Power/Volume Dial2 LED Power Indicator (red)3 LED Low Battery Indicator (amber)4 LED Sound/Loss of Signal Lights5 Antenna6 Speaker7 AC Adapter Jack8 Belt Clip9 Battery Compartment (rechargeable battery pack)10 4 Channel Selector (located inside battery door)11 Keyhole for optional wall mounting(LD of parent’s unit: front, left side, right side, back & back w/battery compartmentopen)
Parent’s Unit (Receiver)1 2 3 4 5 6 7 8 9 10 11Features and Components - Baby’s Unit1 Antenna2 LED Power/Low Battery Indicator3 Microphone4 ON/OFF Dial5 Channel Selector6 AC Adapter Jack7 Battery Carrier(LD of Child’s unit front & back)Baby’s Unit (Transmitter)1 2 3 4 5 6 7AC AdaptersThe AC Adapters are a low voltage power source that allows you to use your householdelectricity to run the Parent’s and Baby’s Units. They connect to the AC Adapter Jacks inthe Parent’s Unit and the Baby’s Unit, and plug into any standard electrical outlet in yourhome.CAUTION: These adapters were made with a specific design for Safety 1st 900 MHzPremium Privacy Link Monitor. They cannot be used with any other appliance. Neveruse a different type of adapter with this monitor.WARNING: Never touch the end of the adapter cord when the adapter is plugged into anelectrical outlet.(LD of AC Adapter)AC AdapterOperating Your 900 MHz Premium Privacy Link MonitorFollow these instructions to operate your 900 MHz Premium Privacy Link Monitor.Reference the illustrations on pages 2 & 3 for the location of all features described inthese instructions.
Baby’s Unit:For best results, place the Baby’s Unit on a table near the crib or bed. It should be facingthe baby’s head as close to the crib as possible, but out of baby’s reach.To Install Battery (One 9 volt battery not included)Locate battery carrier on bottom of the Baby’s unit and using Phillips head screwdriverremove the screw and take off the battery carrier as shown.Snap 9 volt battery (not included) onto the battery pad and return to battery carrier asshown.Replace battery carrier and secure with Phillips screwdriver as shown taking care not toover tighten.(LD of baby’s unit showing battery carrier screw being removed w/Phillips screwdriver)(LD of 9 volt battery correctly snapped onto battery and pad being returned to properposition in carrier)(LD of battery carrier replaced on the unit w/indication of screw being replacedw/Phillips screwdriverTo Activate Baby’s UnitSTEP 1 To use household power, plug the round end of adapter cord into the jack on theBaby’s unit, then plug the the adapter into an electrical outlet.NOTE: Battery power is available when one 9 Volt battery (not included) is installed inthe Baby’s Unit, however it is not recommended to use the battery power for extendedperiods when household power is available.STEP 2 Locate the channel selector on the back of the Baby’s unit. Select one of the fourchannel options, and note your selection on a separate piece of paper.STEP 3 Turn power switch to “ON” position. The LED Light on the Baby’s unit shouldbe illuminated.To Activate Parent’s Unit:For best results, the Parent’s Unit should be placed at least 10 feet awayfrom the Baby’s unit. The Parent’s Unit can be mounted to the wall by usinga screw (not included) to hang the unit using the keyhole on the belt clip onthe back of the unit.
STEP 1 Remove battery cover and select channel to correspond to the same channel usedon Baby’s Unit as shown.(LD of parent’s unit w/battery cover removed indicating channel selector)STEP 2 Place the Parent’s Unit at least 10 feet from the Baby’s Unit.STEP 3 To use household power, plug the round end of adapter cord into the jack on theParent’s unit, then plug the the adapter into an electrical outlet. Turn the power switch to“ON” and set at an appropriate volume level to hear baby at all times. The power-on LEDLight on the Unit should be illuminated and solid red.NOTE: The pre-installed rechargeable battery pack in the Parent’s Unit willautomatically charge when the A/C adapter is in use.STEP 4 For optional battery power, do not attach AC Adapter. Simply turn the powerswitch to “ON” and the Parent’s Unit will run on battery power.Note: If you experience a power failure, the Parent’s Unit and the Baby’sUnit will not automatically switch to battery power. You must disconnect theAC Adapters from the Parent’s and the Baby’s Unit. You must have have installed (1) 9-Volt battery in the Baby’s Unit, and the rechargeable battery pack in the Parent’s Unitmust have been charged prior to use.LED SOUND LEVEL LIGHT INDICATORS/LOSS OF SIGNAL INDICATORSThe four (4) RED LEDs at the top of the Parent’s Unit light up to display sound levels.These sound level indicators are facto-factory pre-set and are not affected by the volumesetting. This feature allows you to view the relative volume level of your baby’s sounds.It is most effective when you are in a noisy environment and may not be able to hear yourbaby’s sounds clearly. The louder the sound, the more RED LEDs will light up. TheseRED LEDs, along with the Speaker, also serve as a loss of signal alarm. When theParent’s unit is too far from the Baby’s Unit for monitoring, the LEDs will flash and theSpeaker will give off an audible alarm.Operating Tips• Make sure that both units are on the same channel. Even though you mayhear your baby’s sounds, proper use of this system requires that both unitsmust be on the same channel. If the units are on different channels, the signals from theBaby’s Unit may be strong enough to be picked up by theParent’s Unit, but these signals are unreliable and may contain substantialstatic.•When using the AC Adapters with household electricity, make sure the out-let haspower. Some electrical outlets are powered through a wall switch in
the room. If both Units are plugged in and ”ON”, the Power indicator LEDsshould be lit. If this does not take place, try placing the wall switch in theroom in another position.Troubleshooting Your Grow-With-Me Intercom MonitorProblem Possible cause SolutionWarrantyONE (1) YEAR LIMITED WARRANTYSafety 1st... WARRANTY.If you... © 1999 Safety 1st, inc.10/99

Navigation menu