Dorel Juvenile Group 49242T Premium Privacy Baby Monitor User Manual

Download:
Mirror Download [FCC.gov]
Document ID	68852
Application ID	++MQfvzTjQl4KuEZ4ZH3Cg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	1.51kB (18839 bits)
Date Submitted	1999-11-24 00:00:00
Date Available	1999-11-24 00:00:00
Creation Date	2001-05-18 13:15:14
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2001-05-18 13:15:15
Document Title	Users Manual

Safety 1st®
900 MHz Premium Privacy Link Monitor
Owner’s Guide
No. 49242
Introduction
Thank you for purchasing the Safety 1st 900 MHz Premium Privacy Link Monitor. This
dependable monitor allows you to hear your baby’s sounds and activities, while the
patented Voice Encryption Technology helps to keep outsiders from tuning into your
communications for maximum privacy.
The baby’s unit sends a continuous transmission of your baby’s sounds to the parent’s
unit. The parent’s unit is pager sized for easy mobility, and features both sound and lights
to monitor your baby’s activities. By using 900MHz technology, these units provide
superior clarity with an extended range of up to 1000 feet. Both units feature unique
“rubberized” bases that allow them to placed on dresser tops and counters more securely.
The parent’s unit may be clipped to a belt for additional mobility, and utilizes and audio
and visual alarm to indicate signal loss. The units have 4 channels to minimize outside
interference and the Premium Privacy Link Monitor sends and receives encrypted audio
signals that only it can decode. All other monitors or scanners will hear nothing but
silence.
The parents’ unit may be used with AC power or with a rechargeable battery pack
(included) for portability. The baby’s transmitter is AC powered, or can also be used with
one 9 volt battery (not included) for maximum portabliliy.
We are sure that you will find the 900 MHz Premium Privacy Link Monitor convenient
and easy to use. to insure that you benefit from all of the great features that your monitor
offers, and to make sure that you use it properly, we urge you to:
Please read all instructions carefully before using this product and keep these instructions
for future reference. If you have any questions, please call our consumer relations number
at (800)723-3065. In Canada please call (800)721-3389.
CAUTION:
• THE 900 MHz Premium Privacy Link Monitor IS NOT INTENDED TO REPLACE
RESPONSIBLE AND PROPER PARENTAL SUPERVISION.
• YOU SHOULD CHECK YOUR CHILD’S ACTIVITY AT REGULAR INTERVALS
AS THIS MONITOR WILL NOT ALERT PARENTS TO THE SILENT ACTIVITIES
OF A CHILD.
WARNING: Changes or modifications to this unit not expressly approved by Safety 1st,
Inc. could void user’s authority to use equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Safety Instructions
(caution flags/graphics)
WARNING: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE
COVERS.
NO SERVICEABLE PARTS INSIDE.
REFER TO SAFETY 1ST CONSUMER RELATIONS: (800) 723-3065.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT
EXPOSE THIS PRODUCT TO WATER OR MOISTURE.
NEVER TOUCH THE END OF THE ADAPTER CORD WHEN THE ADAPTER IS
PLUGGED INTO AN ELECTRICAL OUTLET.
READ INSTRUCTIONS: All the safety instructions should be read before the 900 MHz
Premium Privacy Link Monitor is operated.
RETAIN INSTRUCTIONS: The safety instructions should be retained for future
reference.
HEED WARNINGS: All warnings on the 900 MHz Premium Privacy Link Monitor and
operating instructions should be adhered to.
FOLLOW INSTRUCTIONS: All operating instructions should be followed.
WATER AND MOISTURE: The 900 MHz Premium Privacy Link Monitor should not be
used near water, for example, near a bath tub, wash bowl, kitchen sink, laundry tub, in a
wet basement, near a swimming pool, etc.
VENTILATION: The 900 MHz Premium Privacy Link Monitor should be placed so that
its location does not interfere with proper ventilation of the unit. For example, it should
never be situated on a bed, sofa, rug or similar surface that may block ventilation.
HEAT: The 900 MHz Premium Privacy Link Monitor should be kept away from heat
sources such as radiators, heat registers, stoves or other appliances that produce heat.
AC POWER SOURCE: The 900 MHz Premium Privacy Link Monitor should be
connected only to the AC adapters supplied with the unit.
POWER CORD PROTECTION: The power supply cord should be routed so that it is not
likely to be walked on or pinched by items placed upon or against it. Pay particular
attention to the cord at the plug, convenience receptacle, and at the point it exits from the
AC adapters.
CLEANING: Use a dry cotton cloth to keep the 900 MHz Premium Privacy Link
Monitor free from dust. Do not use water!
NON-USE PERIODS: The power cords of the 900 MHz Premium Privacy Link Monitor
should be unplugged from the outlet when unused for long periods of time. The batteries
should also be removed during these periods.
OBJECT AND LIQUID ENTRY: Care should be taken so that objects do not fall onto
the product, and liquids are not spilled into the enclosure through the openings.
DAMAGE REQUIRING SERVICE: The 900 MHz Premium Privacy Link Monitor
should be serviced by qualified personnel when:
A: The power supply cord or plug has been damaged.
B: Objects have fallen or liquid has been spilled onto the product.
C: The Monitor has been exposed to rain.
D: The Monitor does not appear to operate normally or exhibits a marked change in its
performance.
E: The Monitor has been dropped or the enclosure damaged.
THE USER... CHILD.
Contents
Parent’s Unit (Receiver)
Baby’s Unit (Transmitter)
Rechargeable battery pack (pre-installed in parent’s unit)
(2) AC Adapters
(LD 0f: baby unit; parent unit; two AC adapters; rechargeable battery pack)
Battery Required (Optional)
One 9 volt alkaline battery (not included) for Baby’s Unit
Features and Components - Parent’s unit
1 Power/Volume Dial
2 LED Power Indicator (red)
3 LED Low Battery Indicator (amber)
4 LED Sound/Loss of Signal Lights
5 Antenna
6 Speaker
7 AC Adapter Jack
8 Belt Clip
9 Battery Compartment (rechargeable battery pack)
10 4 Channel Selector (located inside battery door)
11 Keyhole for optional wall mounting
(LD of parent’s unit: front, left side, right side, back & back w/battery compartment
open)
Parent’s Unit (Receiver)
1 2 3 4 5 6 7
8 9 10 11
Features and Components - Baby’s Unit
Antenna
LED Power/Low Battery Indicator
Microphone
ON/OFF Dial
Channel Selector
AC Adapter Jack
Battery Carrier
(LD of Child’s unit front & back)
Baby’s Unit (Transmitter)
1 2 3 4 5 6 7
AC Adapters
The AC Adapters are a low voltage power source that allows you to use your household
electricity to run the Parent’s and Baby’s Units. They connect to the AC Adapter Jacks in
the Parent’s Unit and the Baby’s Unit, and plug into any standard electrical outlet in your
home.
CAUTION: These adapters were made with a specific design for Safety 1st 900 MHz
Premium Privacy Link Monitor. They cannot be used with any other appliance. Never
use a different type of adapter with this monitor.
WARNING: Never touch the end of the adapter cord when the adapter is plugged into an
electrical outlet.
(LD of AC Adapter)
AC Adapter
Operating Your 900 MHz Premium Privacy Link Monitor
Follow these instructions to operate your 900 MHz Premium Privacy Link Monitor.
Reference the illustrations on pages 2 & 3 for the location of all features described in
these instructions.
Baby’s Unit:
For best results, place the Baby’s Unit on a table near the crib or bed. It should be facing
the baby’s head as close to the crib as possible, but out of baby’s reach.
To Install Battery (One 9 volt battery not included)
Locate battery carrier on bottom of the Baby’s unit and using Phillips head screwdriver
remove the screw and take off the battery carrier as shown.
Snap 9 volt battery (not included) onto the battery pad and return to battery carrier as
shown.
Replace battery carrier and secure with Phillips screwdriver as shown taking care not to
over tighten.
(LD of baby’s unit showing battery carrier screw being removed w/Phillips screwdriver)
(LD of 9 volt battery correctly snapped onto battery and pad being returned to proper
position in carrier)
(LD of battery carrier replaced on the unit w/indication of screw being replaced
w/Phillips screwdriver
To Activate Baby’s Unit
STEP 1 To use household power, plug the round end of adapter cord into the jack on the
Baby’s unit, then plug the the adapter into an electrical outlet.
NOTE: Battery power is available when one 9 Volt battery (not included) is installed in
the Baby’s Unit, however it is not recommended to use the battery power for extended
periods when household power is available.
STEP 2 Locate the channel selector on the back of the Baby’s unit. Select one of the four
channel options, and note your selection on a separate piece of paper.
STEP 3 Turn power switch to “ON” position. The LED Light on the Baby’s unit should
be illuminated.
To Activate Parent’s Unit:
For best results, the Parent’s Unit should be placed at least 10 feet away
from the Baby’s unit. The Parent’s Unit can be mounted to the wall by using
a screw (not included) to hang the unit using the keyhole on the belt clip on
the back of the unit.
STEP 1 Remove battery cover and select channel to correspond to the same channel used
on Baby’s Unit as shown.
(LD of parent’s unit w/battery cover removed indicating channel selector)
STEP 2 Place the Parent’s Unit at least 10 feet from the Baby’s Unit.
STEP 3 To use household power, plug the round end of adapter cord into the jack on the
Parent’s unit, then plug the the adapter into an electrical outlet. Turn the power switch to
“ON” and set at an appropriate volume level to hear baby at all times. The power-on LED
Light on the Unit should be illuminated and solid red.
NOTE: The pre-installed rechargeable battery pack in the Parent’s Unit will
automatically charge when the A/C adapter is in use.
STEP 4 For optional battery power, do not attach AC Adapter. Simply turn the power
switch to “ON” and the Parent’s Unit will run on battery power.
Note: If you experience a power failure, the Parent’s Unit and the Baby’s
Unit will not automatically switch to battery power. You must disconnect the
AC Adapters from the Parent’s and the Baby’s Unit. You must have have installed (1) 9Volt battery in the Baby’s Unit, and the rechargeable battery pack in the Parent’s Unit
must have been charged prior to use.
LED SOUND LEVEL LIGHT INDICATORS/LOSS OF SIGNAL INDICATORS
The four (4) RED LEDs at the top of the Parent’s Unit light up to display sound levels.
These sound level indicators are facto-factory pre-set and are not affected by the volume
setting. This feature allows you to view the relative volume level of your baby’s sounds.
It is most effective when you are in a noisy environment and may not be able to hear your
baby’s sounds clearly. The louder the sound, the more RED LEDs will light up. These
RED LEDs, along with the Speaker, also serve as a loss of signal alarm. When the
Parent’s unit is too far from the Baby’s Unit for monitoring, the LEDs will flash and the
Speaker will give off an audible alarm.
Operating Tips
• Make sure that both units are on the same channel. Even though you may
hear your baby’s sounds, proper use of this system requires that both units
must be on the same channel. If the units are on different channels, the signals from the
Baby’s Unit may be strong enough to be picked up by the
Parent’s Unit, but these signals are unreliable and may contain substantial
static.
•When using the AC Adapters with household electricity, make sure the out-let has
power. Some electrical outlets are powered through a wall switch in
the room. If both Units are plugged in and ”ON”, the Power indicator LEDs
should be lit. If this does not take place, try placing the wall switch in the
room in another position.
Troubleshooting Your Grow-With-Me Intercom Monitor
Problem
Possible cause
Warranty
ONE (1) YEAR LIMITED WARRANTY
Safety 1st... WARRANTY.
If you... © 1999 Safety 1st, inc.
10/99
Solution

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : Yes
Create Date                     : 2001:05:18 13:15:14
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2001:05:18 13:15:15-04:00
Page Count                      : 7

EXIF Metadata provided by EXIF.tools