Dorel Juvenile Group 94054T Low power UHF transmitter User Manual Operational Manual

Dorel Juvenile Group Low power UHF transmitter Operational Manual

Operational Manual

PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THE BABY LOONEY TUNES NURSERY MONITOR & CRIB LIGHT KEEP THESE INSTRUCTIONS FOR YOUR FUTURE REFERENCEIF YOU HAVE ANY QUESTIONS, CALL OUR TOLL FREE CONSUMER RELATIONS NUMBER: (800) 723-3065CAUTION: THE NURSERY MONITOR IS NOT INTENDED TO REPLACE PROPER ADULT SUPERVISION. YOU SHOULD CHECK YOUR CHILD’S ACTIVITY AT REGULAR INTERVALS AS THIS MONITOR WILL NOT ALERT PARENTS TO THE SILENT ACTIVITIES OF A CHILD.Baby Looney Tu n e sN u r s e ry Monitor & Crib Light O w n e r ’s GuideThank you for purchasing the Safety 1s t Baby Looney Tunes Nursery Monitor & CribLight. This is a state-of-the-art system that combines some of the most unique feature sthat any baby monitor offers. We are confident that you will appreciate its manyhighlights. As you will soon learn there are many more feature s . . .The Baby’s Unit (Transmitter) has continuous transmission that clearly sends yourb a b y ’s sounds to the Pare n t ’s Unit. This gives you the ability to continue with yourdaily activities throughout the house or yard and at the same time monitor your baby.The Pare n t ’s Unit (Receiver) remains with you wherever you go to pick up the soundsthat are transmitted from the Baby’s Unit. It conveniently clips to your belt or easilystands on a table.Both units are completely portable or AC powered. The AC Adapter allows thereceiver and transmitter to be plugged into any standard electrical outlet for use withyour household electricity. For convenient use without an outlet, use a 9 volt batteryfor the Pare n t ’s unit and 4 “D” cell alkaline batteries for the Baby’s unit (Batteries noti n c l u d e d ) .We are sure that you will find the Safety 1st Baby Looney Tunes Nursery Monitor &Crib Light convenient and easy to use. To insure that you will benefit from all of theg r eat features that our monitor offers, and to make sure that it is used pro p e r l y, weu r ge you to:1C o n t e n t s B a t t e r y Require m e n t sSafety Instru c t i o n sP a re n t ’s Unit (Receiver)B a b y ’s Unit (Tr a n s m i t t e r )Crib Clamp Assembly(2) A/C Adapters(4) "D" size alkaline batteries(1) 9-volt battery(Batteries Not Included)C A U T I O NRISK OF ELECTRIC SHOCKDO NOT OPENCAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER OR BACK.NO SERVICEABLE PA R TS INSIDE.REFER SERVICING TO SAFETY 1S T CONSUMER RELATIONS DEPA R TMENT (800)-723-3065DO NOT EXPOSE THIS PRODUCT TO WATER OR MOISTURE.
l a u n d r y tub in a wet basement, or near a swimming pool, etc.■V E N T I L AT I O N : The Nursery Monitor should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings, or placed in an enclosed installation, such as a book case or cabinet that may impede the flow of air through the ventilation o p e n i n g s .■H E AT: The Nursery Monitor should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances that produce heat.■POWER SOURCE:The Nursery Monitor should be connected to a power supply only of the type described in these operating i n s t ru c t i o n s .■POWER CORD PROTECTION: The power supply cord should be routed so that it is not likely to be walked on or pinched by items placed upon or against it. Pay particular attention to the cord at the plug, convenience receptacle, and at the point it exits from the N u r s e r y Monitor.■C L E A N I N G : Use a dry cotton cloth to keep the Nursery Monitor free of dust. Do Not Use Wa t e r.■NON-USE PERIODS: The power cord of the Nursery Monitor should be unplugged from the outlet when unused for a long period of time. Batteries should be removed from both units.■OBJECT AND LIQUID ENTRY: Care should be taken so that objects do not fall onto, and liquids are not spilled into the enclosure t h r ough the openings.■DAMAGE REQUIRING SERV I C E : The Nursery Monitor should be serviced by qualified service personnel when:A. The Power supply cord has been damaged; orB. Objects have fallen or liquid has been spilled into the product; orC. The Monitor has been exposed to rain; orD. The Monitor does not appear to operate normally or exhibits a marked change in its perf o rmance; orE. The Monitor has been dropped or the enclosure damaged.THE USER SHOULD NOT ATTEMPT TO SERVICE OR REPAIR THE MONITOR. ALL SERVICING SHOULD BE REFERRED TOSAFETY 1S T CONSUMER RELATIONS DEPA RT M E N T: (800) 723-3065WALL MOUNTING: THE PARENT’S UNIT MAY BE MOUNTED ON THE WALL ONLY AS DESCRIBED IN THESE INSTRUCTIONS.WHEN USED WITH ADAPTERS, KEEP ALL PA R TS OF THIS MONITOR OUT OF REACH OF CHILDREN!CAUTION: THIS MONITOR IS NOT INTENDED TO REPLACE PROPER ADULT SUPERVISION. YOU SHOULD CHECK YOUR CHILD’S ACTIVITY AT REGULAR INTERVALS AS THIS MONITOR WILL NOT ALERT PARENTS TO THE SILENT ACTIVITIES OF A CHILD.F e a t u r es and ComponentsPARENT'S UNIT (RECEIVER)1 Power/Channel Switch2 Volume Dial3 AC Adapter Jack4B a t t e r y Compartment (9-volt)5 Plastic Belt Clip6S p e a k e r7 Key Hole Slot for Wall Mounting8 Flexible Antenna9 Low Battery Indicator (Red)1 0 Power On Indicator (Gre e n )1 1 B a t t e r y Cover1 2 (9-volt) Battery (not included)1 3 B a t t e r y ContactsF r ont view of Pare n t ’s Unit (Receiver) Rear view of Pare n t ’ s Unit (Receiver)
F e a t u r es and Components (continued)BABY'S UNIT (TRANSMITTER)1 Power On Indicator2 Low Battery Indicator3 Power/Channel Switch4M i c ro p h o n e5B a t t e r y Compartment (4 “D” Cell Alkaline)6 AC Adapter Jack7 Crib Light Button8 Voice Activation Sensitivity Switch9 Crib Clamp Assembly1 0 Four “D” alkaline batteries, positive (+) to top (not included)1 1 B a t t e r y Cover12 A C Adapter Jack 12A/C ADAPTERThe A/C Adapter is a low voltage power source that allows you to use your household electricity to run the Baby and Pare n t ’ s Unit when youwant to conserve battery life. It connects to the A/C Adapter Jack in the Pare n t ’s Unit and in the Baby’s Unit (when not in use on crib), andplugs into any standard electrical outlet in your home.Note: Do not place adapter under a window where a child might use it to step on and reach something that might be dangero u s .CAUTION: These adapters were made with a specific design for Safety 1st Baby Looney Tunes Nursery Monitor & Crib Light. They cannotbe used with any other appliance. Never use a diff e r ent type of adapter with this monitor.Operating Your Baby Looney Tunes Nursery Monitor & Crib LightFollow these instructions to operate your Baby Looney Tunes Baby Looney Tunes Nursery Monitor & Crib Light. Reference the illustrationsp r ovided on page 1 & 2 for the location of all features described in these instructions. B a b y ’s Unit:For best results, attach the Baby’s Unit to the crib or place the Baby’s Unit on a dresser near the crib or bed.Note: Baby’s Unit can only operate on battery power when attached to crib.9
Installing the batteries in Baby’s Unit (transmitter):R E Q U I R E D :Phillips Scre w d r i v e r4 "D" Size Alkaline Batteries1. Remove screws from battery cover and remove cover.2. Insert 4 "D" size alkaline batteries into the battery compartment by matching the (+) and (-) symbols. (Figure 1)N O T E : The low battery indicator illuminates when the batteries need to be re p l a c e d .3. Replace the battery cover and insert and tighten the scre w s .Attaching Baby’s Unit to Crib:R E Q U I R E D :B a b y ’s Unit (transmitter)Crib Clamp Assembly1. Set the Baby’s unit to setting "A". If you experience static or noise interf e r ence, switch bothunits to setting "B". Power On Indicator should be illuminated.2. Place Baby’s Unit in desired location on crib slats with Baby Looney Tunes characters facingi n w a r d. Screw shaft should be resting on the crib rail. (Figure 2) (Do not translate text in re d )3. Holding Baby’s Unit in place, insert crib clamp assembly into shaft (Figure 3)4. Tu r n knob clockwise to tighten until secure. (Figure 3)Using the Crib LightYour Baby Looney Tunes Baby’s Unit (transmitter) includes a crib light feature that is activated by the sounds of your baby and can also be activated manually. 1. Slide voice activation sensitivity switch to the desired sensitivity setting. Set to high sensitivity when you want the crib light activated by quieter sounds or low sensitivity when you want the crib light activated by louder sounds.N O T E : The crib light will automatically shut off after five minutes.2. To activate the crib light manually, press the manual crib light button. (Figure 4)3. To shut off the crib light manually, press the manual crib light button. (Figure 4)Installing the batteries in Pare n t ’s Unit ( Receiver):1. Remove screw from battery cover on Pare n t ’s Unit and remove cover.2. Insert a 9-volt battery into the battery compartment by snapping the battery contacts into the corresponding connectors on the battery clip in the unit. (Figure 5)N O T E : The low battery indicator illuminates when the batteries need to be re p l a c e d .3. Replace the battery cover and insert and tighten the scre w.Adjusting the Channels1. Place the Pare n t ’s Unit at least 10 feet from the Baby’s Unit. 2. Plug the round end of the adapter into the Pare n t ’s Unit, then plug the adapter into an electrical outlet.3. Set the Pare n t ’s Unit to setting "A". If you experience static or noise interf e r ence, switch both units to setting "B".N O T E : C o n f i r m the Pare n t ’s Unit and Baby’s Unit are set to the same setting (A and A or B and B).4. Adjust the volume so you can hear your baby at all times.N O T E : The Pare n t ’s Unit may be mounted to a wall by using a screw (not included) to attach the unit using the keyhole located on the backon the unit.( F i g u r e 4)( F i g u r e 5)( F i g u r e 2) ( F i g u r e 3)( F i g u r e 2) ( F i g u r e 3)( F i g u r e 1)
Using the A/C AdapterThe A/C Adapters should be used whenever possible to increase the life of the batteries. However, if the Baby’s Unit is mounted to the cribthe A/C Adapter cannot be used. Both units will automatically convert to A/C operation when used with the A/C Adapters. It is not necessary to remove batteries during A/Coperation. Both units will automatically switch back to battery power when disconnected from the adapter. N O T E : If you experience a power failure, the Pare n t ’s Unit (Receiver) and Baby’s unit (transmitter) will not automatically switch to batteryp o w e r. You must disconnect the A/C Adapter from the Pare n t ’s Unit and Baby’s Unit (if not mounted to the crib).Operating Tips ■Make sure that both units are on the same channel. Even though you may hear your baby’s sounds, proper use of this system re q u i res that both units must be on the same channel. If the unitsa r e on diff e r ent channels, the signals from the Baby’s Unit may still be strong enough to be picked up by the Pare n t ’s Unit, but there will be alot of static.■When unit is not in use, remove AC Adapter and be sure the power dial is "Off " .When you are not using the adapter, remove it from the unit and store it in a safe, dry place until you need it again. If the AC Adapter isplugged into the unit but not being used in an electrical outlet, the adapter will prevent the battery operation of the unit.■Use your re c e i v e r ’s AC Adapter when you will be in the same location for most of the day.Use of the adapter provides maximum power to the unit and provides additional antenna length.■When using the AC Adapter with household electricity, make sure the outlet has power. Some electrical outlets are powered through a wall switch in the room. If the Baby’s Unit is plugged in and turned "On", the power indicatorlight should be lit. If it is not, try turning the wall switch in the room "On".Checklist for Problem SolvingPower indicator light not workingStatic or interf e r ence in the signalt r a n s m i s s i o nP a re n t ’s Unit is making loud noisesP a re n t ’s Unit is picking up noisesf r om outside your homeWeak sound coming from unitCrib light does activate or activatestoo muchPower is not getting to the unitB a b y ’s and Pare n t ’s Units may be set on d i ff e rent channelsAppliances with loud fans near units maybe blocking transmissionUnit may be under fluorescent lightsLocal interf e r ence from electrical or radiof r equency appliance near your locationUnits are too close togetherNeighbors may have a baby monitor orc o r dless phoneBatteries may be weakUnits may be too far away from each otherSensitivity may need to be adjustedMake sure wall outlet is working. Maypossibly need to be turned on by a switch.Make sure both units are on the samechannel (A or B)Tu r n off the appliances that may becausing interf e re n c eReduce the distance between the twounits or turn off lightsSwitch channel setting on both Pare n t ’sand Baby’s UnitsP a re n t ’s Unit needs to be at least 10 feet(3meters) away from the Baby’s UnitChange both units to the alternate channel(A or B)Check batteries, replace if necessaryMove the units closer to each otherAdjust sensitivity switchP R O B L E M POSSIBLE CAUSE S O L U T I O NIF YOU ARE STILL HAVING PROBLEMS, PLEASE CALL TOLL FREE FOR HELP! (800) 723-3065.
ONE (1) YEAR LIMITED WA R R A N T YSafety 1s t , Inc. warrants to the original owner of this product that the Nursery Monitor is free from defects in materials and workmanship for a period of one1) year from the date of the original purchase. If this monitor fails to function when used as directed under normal conditions, within the one (1) yearperiod, Safety 1s t will either repair or replace the product at our option, free of charge, when it is re t u r ned complete and in its original packaging, pre p a i dpostage, and insured to Safety 1s t Consumer Relations Department, 210 Boylston Street, Chestnut Hill, MA 02467. Product must be accompanied by a pro o fof purchase, either a bill of sale, receipted invoice, or other proof that the Monitor is within the warranty period. Safety 1s t will bear the cost of repairing orreplacing the product and shipping it back to you.This warranty does not apply to a Nursery Monitor that has been damaged as a result of improper maintenance, accidents, improper voltage supply or othermisuse. The warranty is also void if owner repairs or modifies the product in any way. Safety 1s t is not liable for any incidental or consequential damageswith re g a r d to this product. The warranty also excludes any liability other than what is stated above. No other warranties are given.LEGAL RIGHTS VA RY FROM STATE TO STATE. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.I M P O RTANT NOTE: ONLY USE THE ADAPTERS SUPPLIED FOR THIS NURSERY MONITOR. USE OF OTHER ADAPTERS WILL VOID THIS WA R R A N T Y.IMPORTANT!Please do not return this product to the store!Your questions and comments are important to us!Thank you for purchasing this quality product from Safety 1s t . We are confident you will be pleased with its many feature sand perf o r mance. If you are having any problems assembling, installing, or using this product, please call us. We will be veryhappy to answer any questions that you may have. Many times there is a simple solution to any problem that may occur.Talking to us directly will be convenient and save you time.f you have questions or comments, please call our toll free Consumer Relations number: (800)723-3065. We guarantee all of our Safety 1st products. If you are not completely satisfied, please re t u r n with proof of purchase to:Safety 1st, Inc., 210 Boylston St. Chestnut Hill, Massachusetts 02467 USASafety 1st Canada Inc., 804 Rue Deslauriers, Ville St. Laurent, Quebec H4N 1X1 CanadaSafety 1st Europe Ltd., Isopad House, Shenley Road, Borehamwood, Herts, WD61TE Great Britain Made in CHINA to Safety 1st quality specifications. ©1998 Safety 1st1 1 / 9 86Call our Consumer Re l a tions De p a rt m e n t to l l - f r ee at (800) 723-3065 9:00 am to 5:00 pm (EST) Mo n d ay - Fri d ay.We will gladly answer any and all of your questions about this prod u ct.

Navigation menu