Dorel Juvenile Group MO126TX LumiSound 900 MHz Audio Monitor User Manual MO126 IB ENG USA 112213

Download:
Mirror Download [FCC.gov]
Document ID	2139645
Application ID	IPlK3rTdMe+H6tulFIBoNg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	119.41kB (1492663 bits)
Date Submitted	2013-12-11 00:00:00
Date Available	2013-12-11 00:00:00
Creation Date	2017-10-24 16:11:55
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-24 16:11:55
Document Title	MO126 IB_ENG USA_112213
Document Creator	Adobe Illustrator CS6 (Macintosh)
Document Author:	Sue Goulart

Important!
Quick Start Guide
Using Your Monitor (continued)
User Guide
MO126
WARNING!
TERMS USED IN WARNINGS: The term “Receiver” corresponds to
“Parents Unit” and the term “Transmitter” correspond to “Baby’s
Unit” in the rest of the instruction booklet.
Strangulation Hazard - Children
have STRANGLED in cords.
Keep cords out of
reach of children
more than 3 feet
(0.9 m) away.
Plug in here
LumiSound
900 MHz
Audio Monitor
with Rechargeable Battery
Thank you for purchasing a Safety 1st product. We are not only about safety,
we're also about your satisfaction. If you have any questions or comments,
please call our Consumer Relations department at 1-800-544-1108 or
e-mail us at consumer@safety1st.com
Please read the following instructions and warnings carefully.
Keep these instructions for future reference.
Tool needed: Phillips Head Screwdriver (not included)
WARNING!
Strangulation Hazard - Children have STRANGLED
in cords. Keep cords out of reach of children more
than 3 feet (0.9 m) away.
Features & Components
Parent Unit/
Receiver
Baby Unit/
Transmitter
P AC Adapters
(2)
Q Rechargeable
Battery
Baby฀Unit฀(Transmitter)
Parent฀Unit฀(Receiver)
Antenna
Antenna
Sound Lights
Night Light Activation
Speaker
Microphone
Channel Select Switch (A/B)
Channel Select Switch (A/B)
On/Off Power & Volume Dial
Power On Switch
AC Adapter Jack
Power On Indicator (Green LED)
Belt Clip
AC Adapter Jack
Battery Compartment
(for rechargeable battery, included)
AC฀Adapters฀(2)
WARNING:
•฀The฀Monitor฀is฀not฀intended฀to฀replace฀responsible฀and฀proper
parental supervision.
•฀Check฀your฀child’s฀activity฀at฀regular฀intervals฀as฀this฀monitor฀will฀not
alert parents to the silent activities of a child.
•฀ALWAYS฀KEEP฀THE฀TRANSMITTER,฀RECEIVER฀AND฀AC฀ADAPTERS฀OUT
OF REACH OF CHILDREN.
•฀This฀product฀is฀not฀intended฀to฀be฀used฀as฀a฀medical฀monitor฀and฀its
use should not replace adult supervision.
•฀It฀is฀essential฀to฀check฀reception฀regularly.฀Please฀see฀the฀Testing
Reception section for complete instructions.
•฀The฀Monitor฀is฀intended฀for฀indoor฀home฀use฀only.
•฀NEVER฀use฀the฀Transmitter฀or฀Receiver฀near฀water.฀For฀example,฀do
not use near a bathtub, bathroom sink, laundry tub, kitchen sink, in
a wet basement, etc.
•฀Always฀unplug฀the฀AC฀adapters฀from฀wall฀outlets฀during฀long฀periods
of non- use.
•฀Position฀the฀Transmitter,฀Receiver฀and฀AC฀adapters฀to฀allow฀adequate
ventilation and prevent these components from overheating.
•฀To฀prevent฀overheating,฀keep฀the฀Transmitter,฀Receiver฀and฀AC
adapters away from heat sources such as radiators, heat registers,
stove or other appliances (including am lifiers) which produce heat.
Also keep these components out of direct sunlight.
•฀Use฀only฀the฀AC฀adapters฀provided.฀฀Use฀of฀any฀other฀adapters฀may
damage the Transmitter and /or Receiver. Plug the AC adapters into
standard household current only (120V AC outlet)! To prevent
฀฀฀entanglement฀and฀overheating,฀DO฀NOT฀use฀extension฀cords.
•฀The฀AC฀adapters฀may฀become฀slightly฀warm฀to฀the฀touch฀during
operation. This is normal.
•฀Position฀the฀AC฀adapter฀cords฀to฀that฀they฀are฀not฀walked฀on฀or฀pinched
by items place upon or against them, paying particular attention to cords
at AC adapter plugs, wall plugs, and the point at which the cords attach
to the Transmitter and Receiver.
•฀This฀product฀should฀be฀serviced฀only฀by฀qualified฀service฀personnel฀at
Dorel Juvenile Group when:
o An AC adapter or its plug is damaged,
o The Transmitter or Receiver have fallen,
฀฀฀฀฀฀฀฀o฀Liquid฀has฀spilled฀into฀the฀Transmitter฀or฀Receiver฀or
o The Transmitter or Receiver does not appear to operate normally or
฀฀฀฀฀฀฀฀฀฀฀exhibit฀a฀marked฀change฀in฀performance.
•฀DO฀NOT฀attempt฀to฀service฀this฀product฀beyond฀that฀described฀in฀the
Troubleshooting section at the end of these instructions. All other
฀฀฀servicing฀should฀be฀referred฀to฀qualified฀personnel฀at฀Dorel฀Juvenile฀Group.
•฀NOTE:฀The฀LEDS฀emit฀IR฀(infrared)฀light฀that฀is฀not฀harmful.
Rechargeable฀Battery
Battery Installation & Use
1฀ Connect AC adapter to the side of
Parent Unit.
BATTERY฀INSTALLATION:
Tools฀required:฀Phillips฀Head฀Screwdriver฀
(not included) & Rechargeable Battery
Pack (included).
1. Unscrew battery cover and remove
from Parent Unit (Figure 1).
2. Align connectors of the Parent Unit and
rechargeable battery pack (Figure 2).
3. Place rechargeable battery pack inside
Parent Unit (Figures 3 & 4).
4. Secure battery cover with its screw.
•฀TO฀PREVENT฀ENTANGLEMENT,฀ONLY฀MOUNT
฀฀฀THE฀BABY’S฀UNIT฀IN฀A฀LOCATION฀WHERE฀IT
฀฀฀AND฀ITS฀AC฀ADAPTER฀CORD฀ARE฀OUT฀OF
฀฀฀REACH฀OF฀CHILDREN.
•฀TO฀PREVENT฀ENTANGLEMENT฀AND
฀฀฀OVERHEATING฀NEVER฀USE฀AN฀EXTENSION
฀฀฀CORD.
PROPER฀POSITIONING
IMPORTANT:฀When choosing locations to set up the Baby Unit and Parent Unit, follow
these guidelines:
• For฀best฀sound฀quality,฀place฀Baby฀Unit฀6฀feet฀(2฀meters)฀away฀from฀the฀baby.
• Adjust฀volume฀dial฀on฀Parent฀Unit฀to฀appropriate฀level฀to฀minimize฀feedback.
• During฀use฀of฀the฀monitor,฀sound฀quality฀deteriorates฀as฀you฀reach฀the฀
limits of the monitor's range. If this happens, you will need to move the
Parent฀Unit฀in฀closer฀proximity฀to฀the฀Baby฀Unit.
• Adjust the volume to a comfortable level for your environment.
2฀ Connect AC adapter to the side of
Baby Unit.
Power On/Off
& Volume Dial
Channel
Select
A/B
Power
On/Off
Channel
Select
A/B
Plug Parent Unit and plug Baby Unit
into wall to operate AC power.
4฀ Turn Parent Unit on. Slide Channel Select
switch to desired channel selection side.
Power On Indicator will illuminate. Make sure
volume฀is฀turned฀down฀to฀avoid฀squealing.฀
5฀ Turn Baby Unit on. Slide Channel Select
switch to desired channel selection side.
Power On Indicator will illuminate. Refer to
Channel Selection section. Power On Indicator
will illuminate.
Use household electricity whenever possible. When the AC Adapter is used with your
household electricity, you will find that the power is stronger and more consistent than
when฀you฀rely฀solely฀on฀the฀battery.฀Range฀and฀sound฀quality฀also฀depends฀on฀the฀
construction฀of฀your฀house.฀Steel฀reinforced฀wall,฀for฀example,฀reduces฀the฀effective฀
range of the monitor. Conserve the battery so you will have power when you don’t
have easy access to AC outlets.
Make฀sure฀that฀both฀Units฀are฀on฀the฀same฀channel.฀
Even฀though฀you฀may฀hear฀you฀baby’s฀sounds,฀proper฀use฀of฀this฀system฀requires฀that฀
both Units must be on the same channel. If the Units are on different channels, the
signals from the Baby Unit may still be strong enough to be picked up by the Parent
Unit, but there will be a lot of static.
When฀not฀using฀the฀Unit,฀remove฀AC฀Adapter฀
and฀be฀sure฀the฀power฀button฀is฀“OFF”.฀
Channel฀1฀Frequency:฀914.8฀MHz
Channel฀2฀Frequency:฀914.2฀MHz
Carrier฀Frequency:฀914.8฀MHz฀to฀914.2฀MHz
80 dB Micro-volts per meter at 3 meters.
Field Strength is 70
When you are not using the AC Adapter, remove it from the Unit and store it in a safe,
dry place until you need it again. If the AC Adapter is plugged into the Parent Unit but
not being used in an electrical outlet, the AC Adapter will prevent battery operation
of the Unit.
When฀using฀the฀AC฀Adapter฀with฀household฀electricity,฀
make฀sure฀the฀outlet฀is฀“ON”.฀
NIGHT฀LIGHT
Activate the night light by pressing on the top of the Baby Unit.
Night light will remain on until you press the top of the Baby Unit again.
Some electrical outlets are powered through a switch in the room. If the Baby Unit is
plugged in and turned “ON”, the power indicator light should be lit. If it is not, try
turning the light switch in the room “ON”.
Use and Care
IMPORTANT:
Care฀and฀Cleaning:
The first time you use your monitoring system, two adults should test it in the
following way:
• Place Parent Unit at least 20 ft. (6m) away from Baby Unit.
Use a soft, dry cloth to keep your monitor free from dust.
DO NOT immerse product in water.
• Have an adult speak into Baby Unit at various levels (soft to loud)
while another adult checks Parent Unit for the proper sound reception.
Using Your Monitor
DO฀NOT฀PLACE฀UNITS฀IN฀CRIB฀OR฀MOUNT฀ON฀CRIB.฀
KEEP฀OUT฀OF฀REACH฀OF฀CHILDREN.
AC฀ADAPTER
The Parent Unit operates on household electricity with the AC Adapter or
with rechargeable battery (included). The Baby Unit operates on household electricity
with the AC Adapter only. The Parent Unit will automatically convert to AC operation
when used with the AC Adapter. It is not necessary to remove the battery during AC
operation. The Parent Unit will automatically switch back to battery power when plug
is disconnected from the AC Adapter.
The AC Adapter should be used whenever possible on the Parent Unit to save battery
life. This is done by inserting the AC Adapter into the AC Adapter Jack. Then simply
plug the AC Adapter into a nearby standard household outlet (120V AC outlet). The AC
Adapters may become slightly warm to the touch during operation. This is normal.
This AC Adapter is a low voltage power source which allows you to use your household electricity to run the Baby and Parent Units when it connects to the AC Adapter
Jack in the Parent Unit and in the Baby Unit, and plugs into any standard electrical
outlet in your home.
To remove AC adapter from the outlet, firmly grasp the adapter "brick."
DO NOT pull on the cord, as this could damage it.
Try Parent Unit in every location that it will be used.
Troubleshooting
IF YOU ARE STILL HAVING PROBLEMS, PLEASE CALL TOLL FREE FOR HELP! (800) 544-1108.
PROBLEM
POSSIBLE CAUSE
SOLUTION
Power indicator light
not working
Power is not getting to the Unit
Make sure wall outlet is working; may possibly need to be turned on by a switch
Make sure AC adapter is plugged into wall and the Unit
Static or interference in the
signal transmission
Baby and Parent Units may be
on different channels
Make sure both Units are on the same channel (2 channel options: A or B)
Appliances with loud fans near Units
may be blocking transmission
Turn off the appliances that may be causing interference
Unit may be under fluorescent lights
Reduce the distance between the two Units or turn off lights
Local฀interference฀from฀electrical฀or฀radio฀frequency฀
appliance near your location
Switch channel setting on both Parent and Baby Units
Units are too close together
Parent Unit needs to be at least 10 feet / 3 meters away from the Baby Unit
Volume dial on Parent Unit may be too high
Turn down volume on the Parent Unit
Parent Unit is picking up
noises from outside
your home
Neighbors may have a baby monitor or cordless phone
Change both Units to the alternative channel (2 channel options: A or B)
Weak sound coming
from Parent Unit
Battery may be weak
Check battery; recharge if necessary
Parent Unit is making
loud noises
Units may be too far away from each other
Move the Units closer to each other
Keep฀speaker/microphone฀clear฀from฀obstructions
CAUTION:฀This฀AC฀Adapter฀was฀made฀with฀a฀specific฀design฀for฀the฀Safety฀1st฀฀
Monitor.฀It฀cannot฀be฀used฀with฀any฀other฀appliance,฀and฀never฀use฀a฀different฀type฀
of฀adapter฀with฀this฀Monitor.
Can’t hear baby’s sounds
Speaker or microphone could be blocked
Battery life is short
Battery฀life฀in฀the฀parent฀unit฀will฀last฀approx.฀8hrs฀per฀charge
Use unit cautiously during battery operation to conserve your battery life
Note:฀When using the Parent Unit on battery power, make sure the adaptor cord is
unplugged from the side of the monitor. The Parent Unit will NOT function on battery
power if the adaptor cord is still plugged into the side of the monitor. It must be
disconnected from the unit.
Parent Unit does NOT
function with batteries
Adapter cord still plugged into side of monitor
Unplug the adaptor cord from side of Parent Unit
• When using batteries, check batteries regularly. DO NOT use audio
•฀TO฀REDUCE฀THE฀RISK฀OF฀FIRE฀OR฀ELECTRICAL
฀฀฀SHOCK,฀DO฀NOT฀EXPOSE฀THIS฀PRODUCT฀TO
฀฀฀WATER฀OR฀MOISTURE.฀NEVER฀ATTEMPT฀TO
฀฀฀OPEN฀THE฀CASE฀OF฀THE฀PRODUCT.฀THIS฀IS
฀฀฀DANGEROUS฀AND฀WILL฀VOID฀THE฀WARRANTY.฀
฀฀฀NO฀SERVICEABLE฀PARTS฀INSIDE.฀฀REFER
฀฀฀SERVICING฀TO฀DOREL฀JUVENILE฀GROUP
CONSUMER฀RELATIONS฀(800-544-1108).
Baby฀Unit฀(Transmitter):
FREQUENCY RANGE
Plug in here
CAUTION:
monitor system in portable mode when batteries are low.
•฀Battery฀Pack฀Must฀Be฀Recycled฀or฀Disposed฀of฀Properly.฀
•฀Caution:฀฀Use฀only฀rechargeable฀batteries฀supplied.฀฀Do฀not฀use
alkaline non rechargeable batteries.
•฀Do฀not฀submerge฀any฀part฀of฀the฀product฀in฀water.
•฀Remove฀batteries฀when฀stored฀for฀long฀periods฀of฀non-use.
•฀Unplug฀power฀cord฀before฀replacing฀batteries.
•฀Do฀not฀mix฀old฀batteries฀with฀new.
•฀Do฀not฀mix฀alkaline,฀standard,฀(carbon฀zinc),฀or฀rechargeable฀batteries.
•฀Use฀only฀the฀adapters฀supplied฀with฀this฀product.฀฀Incorrect฀adapter
polarity or voltage can seriously damage the product.
•฀There฀is฀a฀risk฀of฀explosion฀if฀the฀batteries฀are฀replaced฀by฀and฀incorrect฀type.
•฀Check that all contact surfaces are clean and bright before installing batteries.
Helpful Hints
Parent฀Unit฀(Receiver):
CHANNEL฀SELECTION
The฀Monitor฀can฀broadcast฀over฀two฀preset฀factory฀frequencies฀or฀channels.฀Use฀setting฀
“1”฀making฀sure฀that฀both฀units฀are฀set฀to฀“1”.฀If฀you฀experience฀static฀or฀noise฀interference,฀
simply switch both units to channel “2”, whichever channel option provides
the best reception.
POWER฀INDICATOR
The power indicator is a green LED that indicates that the unit is on and functioning.
VOLUME฀DIAL
Volume can be adjusted to any desired listening level by rotating the Volume Dial,
so you can be sure to hear your baby at all times. The sounds are transmitted through the wide
range speaker. It is essential to check reception regularly. Refer to Use and Care section.
SOUND฀LIGHTS
As baby’s voice gets louder, the sound light LEDs will illuminate from left to right and rises
incrementally as baby’s noise level increases until all Sound Light LEDs are illuminated.
LOW฀BATTERY฀INDICATOR
Low battery power is indicated by the red LED, which signals when the battery needs
to be rcharged.
LINK฀INDICATOR฀-฀OUT฀OF฀RANGE
Static noise will be heard if both units are not set to the same channels or if they
are too far apart.
BELT฀CLIP
The Belt Clip is convenient for portability. You can clip the Parent Unit to your belt
or waistband after a battery has been installed.
FCC Statement
WARNING:฀Changes฀or฀modifications฀not฀expressively฀approved฀by฀Dorel฀Juvenile฀Group฀can฀void฀
your฀authority฀to฀operate฀this฀equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept
any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and
maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio
interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically
radiated power (e.i.r.p.) is not more than that necessary for successful communication.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une
antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans
le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir
le type d'antenne et son gain de sorte฀que฀la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse
pas l'intensité nécessaire à l'établissement d'une communication satisfaisante.
One (1) Year Limited Warranty
Dorel฀Juvenile฀Group,฀Inc.฀warrants฀to฀the฀original฀purchaser฀that฀this฀900฀MHz฀Audio฀Monitor,฀
is free from material and workmanship defects when used under normal conditions for a period
of one (1) year from the date of purchase. Should the product contain defects in material or
workmanship Dorel Juvenile Group, Inc., will repair or replace the product, at our option, free of
charge. Purchaser will be responsible for all costs associated with packaging and shipping the
product to Dorel Juvenile Group Consumer Relations Department at the address noted below and
all other freight or insurance costs associated with the return. Dorel Juvenile group will bear the
cost of shipping the repaired or replaced product to the purchaser. Product should be returned
in its original package accompanied by a proof of purchase, either a sales receipt or other proof
that the product is within the warranty period. This warranty is void if the owner repairs or
modifies the product or the product has been damaged as a result of misuse.
This฀warranty฀excludes฀any฀liability฀other฀than฀that฀express฀stated฀previously,฀including฀but฀not฀
limited฀to,฀and฀incidental฀or฀inconsequential฀damages.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS
THAT MAY VARY FROM STATE TO STATE.
Thank you again for purchasing a Safety 1st product. We are not only about safety, we’re also
about฀your฀satisfaction.฀If฀you฀have฀any฀questions฀or฀comments,฀please฀call฀our฀Consumer฀
Relations department at 1-800-544-1108 or e-mail us at consumer@safety1st.com.
©2013 Cosco Management, Inc. All Rights Reserved. Todos derechos reservados.
www.djgusa.com (800) 544-1108 www.safety1st.com Made in CHINA.
Hecho en CHINA. Styles and colors may vary. Los estilos y los colores pueden variar.
Distributed by (distribuido por) Dorel Juvenile Group, Inc., 2525 State St., Columbus,
IN 47201-7494 Dorel Distribution
safety1st.com 11/22/13
Canada, 873 Hodge, St. Laurent,
Register for our eNewsletter and
QC H4N 2B1
4358-6514
watch our experts on Safety 1 TV
st

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : Sue Goulart
Create Date                     : 2013:11:22 14:34:12+08:00
Modify Date                     : 2013:12:10 11:55:46-08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Startup Profile                 : Print
Producer                        : Adobe PDF library 10.01
Creator Tool                    : Adobe Illustrator CS6 (Macintosh)
Metadata Date                   : 2013:12:10 11:55:46-08:00
Thumbnail Width                 : 256
Thumbnail Height                : 184
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 25671 bytes, use -b option to extract)
Document ID                     : xmp.did:F77F117407206811822AD6B2C43E7195
Instance ID                     : uuid:eb34897e-6438-43b3-8cc5-135894ac584b
Rendition Class                 : proof:pdf
Original Document ID            : uuid:3DE798951AD111E3B1929FA2B8A6FFFB
Derived From Instance ID        : uuid:b9d4ca16-0e09-4837-b566-2c60223bdfd4
Derived From Document ID        : xmp.did:02801174072068118083D14609301381
Derived From Original Document ID: uuid:3DE798951AD111E3B1929FA2B8A6FFFB
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:F77F117407206811822A842C9E2270E4, xmp.iid:F77F117407206811822AD6B2C43E7195
History When                    : 2013:10:25 13:39:16+08:00, 2013:11:22 14:34:07+08:00
History Software Agent          : Adobe Illustrator CS6 (Macintosh), Adobe Illustrator CS6 (Macintosh)
History Changed                 : /, /
Format                          : application/pdf
Title                           : MO126 IB_ENG USA_112213
Creator                         : Sue Goulart
N Pages                         : 1
Has Visible Transparency        : True
Has Visible Overprint           : True
Max Page Size W                 : 419.999514
Max Page Size H                 : 297.000132
Max Page Size Unit              : Millimeters
Font Name                       : Gotham-Medium, Gotham-Bold, HelveticaNeue-MediumCond, HelveticaNeue-BoldCond, HelveticaNeue-Medium, HelveticaNeue-Condensed
Font Family                     : Gotham, Gotham, Helvetica Neue, Helvetica Neue, Helvetica Neue, HelveticaNeue
Font Face                       : Medium, Bold, 67 Medium Condensed, 77 Bold Condensed, Medium, Condensed
Font Type                       : Type 1, Type 1, Type 1, Type 1, TrueType, TrueType
Font Version                    : 001.000, 001.000, 001.000, 001.000, 8.0d6e1, Macromedia Fontographer 4.1 11/5/98
Font Composite                  : False, False, False, False, False, False
Font File Name                  : GothaMed; Gotham, GothaBol; Gotham, HelveNeuMedCon; Helvetica Neue Cond, HelveNeuBolCon; Helvetica Neue Cond, HelveticaNeue.dfont, HelveticaNeue Condensed.ttf
Plate Names                     : Cyan, Magenta, Yellow, Black, PANTONE 425 C
Swatch Groups Group Name        : Default Swatch Group
Swatch Groups Group Type        : 0
Swatch Groups Colorants Swatch Name: PANTONE 425 C
Swatch Groups Colorants Type    : SPOT
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Colorants Mode    : RGB
Swatch Groups Colorants Red     : 94
Swatch Groups Colorants Green   : 95
Swatch Groups Colorants Blue    : 98
Page Count                      : 1
For                             : Helen Ye,
Bounding Box                    : 0 -3 1191 842
Container Version               : 11
Creator Version                 : 16

EXIF Metadata provided by EXIF.tools