Dorma IMLR 1 9000 Series MLR Retraction Installation Instructions 7 14
User Manual: Dorma 9000 Series MLR Retraction Installation Instructions Installation Instructions
Open the PDF directly: View PDF 
.
Page Count: 5
| Download | |
| Open PDF In Browser | View PDF |
INSTALLATION INSTRUCTIONS
9000 Series MLR motorized latch retraction device
Specifications:
Electrical input requirements:
24Vdc +10%
Filtered and regulated power supply; ie: DORMA PS610RF or PS532RF.
The unit may also be powered by the DORMA ED900 operator.
Current: .88A max. inrush, 400mA max. hold
Non polarized leads
Provides simultaneous electric latch retraction and dogging (depressed touch bar).
Onboard indicator light assignments: (Touch pad must be removed to view)
Maintain input power to exit device and check the onboard indicator light status.
Remove input power prior to attempting to make any corrections or changes.
Indication
Green Yellow Red
(Power) (Sensor) (Error)
Possible solution
Off
Off
Off
No power.
Connect the wiring between the power supply
and the exit device.
On
On
Off
Normal operation. The touch bar is retracted to the dogged
position and dogged; the latch is retracted by default. The
device is allowed 2 attempts.
On
Off
On
Error in operation. The touch bar did not retract to the dogged
position within the 2 attempts.
Rotate the adjustment screw counterclockwise
to decrease the latch retraction.
On
On
Blink
Error in operation. The touch bar is retracted to the dogged
position but not able to remain dogged. The device is allowed
5 attempts.
Rotate the adjustment screw counterclockwise
to decrease the latch retraction.
On
On
On
On
Blink
On
Error in operation. Without power being removed, the touch bar
went from being dogged to unintentionally being extended, and
the touch bar did not retract to the dogged position within 2
attempts.
Cycle the input power.
Error in operation. The touch bar did not extend from the
dogged position when the power was last removed. The
device will not attempt a retraction.
Size A:
Fits 48" door opening without cutting.
Can be cut to fit a 34" minimum door opening.
Size B:
Fits 36" door opening without cutting.
Can be cut to fit a 28" minimum door opening.
Size C:
Fits 36" door opening with out cutting.
Using a shorter touch pad than the standard "B"
size allows it to be cut to 25" door opening.
Clear the jam condition manually and cycle
the input power.
MINIMUM WIRE GUAGE CHART (AWG) FOR 24V AC/DC
DISTANCE IN FEET FOR 2 CONDUCTORS
FROM POWER SOURCE TO LOCKING DEVICE
AMPS
.25
.50
.75
1.00
1.50
2.00
2.50
3.00
25
18
18
18
18
18
18
18
18
50
18
18
18
18
18
18
18
16
75
18
18
18
18
18
16
16
14
100
18
18
18
18
16
16
14
14
150
18
18
18
16
16
14
200
18
18
16
16
14
250
18
18
16
14
300
18
16
14
14
Addtional options available such as MS,CD,LM, BPA etc.; However minimum cut lengths may different than shown.
See addtional pages for typical wiring diagrams. For additional diagrams or a custom project specific diagram please contact DORMA at number below.
1135-252 95071186
www.dorma-usa.com
1-800-523-8483
IMLR-1F 1/2014
Source Exif Data:
File Type : AI File Type Extension : ai MIME Type : application/vnd.adobe.illustrator PDF Version : 1.6 Linearized : Yes Create Date : 2014:10:08 11:20:13-04:00 Modify Date : 2014:10:09 11:02:55-04:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Metadata Date : 2014:10:09 11:02:55-04:00 Format : application/pdf Document ID : uuid:a6a86529-9148-4768-9ad1-3ce39c28da3b Instance ID : uuid:4487c2c8-34f2-4645-a2cd-40e873285a7d Page Count : 5 Creator : Adobe Illustrator(R) 16.0 AI Creator Version : 16.0.0 For : Terry Alms, Title : IMLR-1.pdf Bounding Box : -46 21 586 757 AI Build Number : 682 AI Color Usage : Color AI Ruler Units : Inches AI Color Model : RGB AI Target Resolution : 800 AI Num Layers : 1 Container Version : 11 Creator Version : 16EXIF Metadata provided by EXIF.tools