Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2471183 |
| Application ID | jBqHDDFHqFTcJOV0lbKaQQ== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 125.76kB (1572036 bits) |
| Date Submitted | 2014-12-12 00:00:00 |
| Date Available | 2014-12-12 00:00:00 |
| Creation Date | 2013-07-08 03:49:21 |
| Producing Software | Nitro Pro 7 (7. 2. 0. 12) |
| Document Lastmod | 2014-12-11 11:58:39 |
| Document Title | Users Manual |
| Document Creator | Nitro Pro 7 (7. 2. 0. 12) |
Users Manual AB1126 TABLE OF CONTENTS TABLE OF CONTENTS .................................................................................................................................... 2 System Overview .................................................................................................................................... 3 1.1 General Description ..................................................................................................................... 3 1.2 Features ....................................................................................................................................... 3 1.3 Applications.................................................................................................................................. 4 Electrical Characteristics ..................................................................................................................... 5 2.1 Absolute Maximum Ratings ....................................................................................................... 5 2.2 Recommended Operating Conditions........................................................................................ 5 2.3 Digital Terminals......................................................................................................................... 5 2.4 Reference Clock ........................................................................................................................ 6 2.5 Switching Regulator ................................................................................................................... 6 2.6 LDO Regulator ........................................................................................................................... 7 2.7 Battery Charger.......................................................................................................................... 7 2.8 Typical Current Consumption..................................................................................................... 7 2.9 Radio Characteristics................................................................................................................. 8 2.9.1 Transmitter ........................................................................................................................ 8 2.9.2 Receiver ............................................................................................................................ 9 FCC Statement ................................ ..................................................................................................................... 12 1 System Overview 1.1 General Description AB1126 is an optimized single-chip solution which integrates baseband and radio for wireless human input device applications including 3D glasses, game controller, remote control, and wireless mouse. It complies with Bluetooth system version 3.0 with the EDR function. AB1126 integrates the Li-ion battery charger circuit that provides 400mA charging current and reduces customer charging time. 1.2 Features Compliant with Bluetooth 3.0 specification Support EDR function HID profile version 1.1 compliant 3D Sync profile 1.0 compliant Device ID profile 1.3 compliant Support 3-axis detection Support hardware key-scan matrix Support SPI interface with 2/4-wire mode to mouse sensor IC Support I2C EEPROM interface Support UART interface for firmware downloading and peripheral control Embedded 4 LED drivers with fader Low cost ROM based design with customer code support Embedded power management unit Integrated 1.8V Buck and 1.8/2.7V LDO regulator Integrated Li-ion battery charger Single RF port for transmitter and receiver Receiver sensitivity of -89dBm at basic data rate Transmit power up to +4dBm with 25 dB gain tuning range QFN 5mm x 5mm 40 pin package 1.3 Applications There are two typical applications of AB1126. One is 3D Glasses, and the other is wireless mouse. The application block diagrams are illustrated as below 3D Glasses Figure 1-1 3DG Application Block Diagram Wireless Mouse Figure 1-2 Wireless Mouse Application Block Diagram 2 Electrical Characteristics 2.1 Absolute Maximum Ratings MIN. MAX. UNIT I/O supply voltage (VCCIO) -0.3 5.5 Switching Regulator supply voltage (BAT_P) -0.3 5.5 Charger supply voltage (V_CHG) -0.3 6.5 Operating temperature -40 +85 C Storage temperature -65 +150 C LNA input level +10 dBm PA output load mismatch 10:1 ITEM Table 3-1 Absolute Maximum Ratings AB1128 could be damaged by any stress in excess of the absolute maximum ratings listed above 2.2 Recommended Operating Conditions Item Min. Typ. Core supply voltage (VCCIF, VCCRF, VCCVCO, VCCPLL, 1.8 VCCDIG, VCCXO) I/O supply voltage (VCCIO) Unit 1.8 3.6 4.2 6.5 Max. Unit 0.3*VCCIO Switching Regulator supply voltage (BAT_P) Charger supply voltage (VCHG) Max. 4.5 Table 3-2 Recommended Operating Conditions 2.3 Digital Terminals Item Min. Typ. Input Voltage Levels Input logic level low (VIL) Input logic level high (VIH) 0.7*VCCIO VCCIO+0.4 0.4 Output Voltage Levels ( VCCIO=1.8V ) Output logic level low (VOL), IO=4.0mA * Output logic level high (VOH), IO=-4.0mA ** 0.7*VCCIO Output Voltage Levels ( VCCIO=3.3V ) Output logic level low (VOL), IO=4.0mA * 0.4 Output logic level high (VOH), IO=-4.0mA ** 0.7*VCCIO Table 3-3 Digital Terminals 2.4 Reference Clock Item Min. Typ. Max. Unit Crystal Requirement Nominal Frequency 16 Operating Temperature Range -30 aging -20 Drive level Load capacitance 25 MHz 85 ℃ +20 ppm 100 uW pF Frequency tolerance Frequency Stability over Operating Temperature Range -10 +10 ppm -30 +30 ppm Crystal Oscillator Characteristics Tuning Range Negative resistance -150 Ω Table 3-4 Reference Clock 2.5 Switching Regulator External inductor = 10uH, External capacitor = 10uF Item Condition Input Voltage Output Voltage Min. Typ. BAT_P > 2.2V 1.7 1.8 Max. Unit 4.4 1.9 Rated Output Current (Iout) 100 mA Switching Frequency 1.3 MHz 90 Power Efficiency @Iout=40mA Table 3-5 Switching Regulator 2.6 LDO Regulator External capacitor = 10uF Item Condition Min. Typ. Max. Unit Input Voltage LI_MODE_N=1 2.0 4.4 Input Voltage LI_MODE_N=0 2.7 4.4 Output Voltage LI_MODE_N=1 Output Voltage LI_MODE_N=0 1.8 2.5 3.2 Rated Output Current (Iout) 100 mA Table 3-6 LDO Regulator 2.7 Battery Charger Item Min. Typ. Max. Unit Input Voltage 4.5 6.5 Charge Current (CC Mode) 25 400 mA Trickle Charge Current mA Trickle to CC Charge Threshold Voltage 200 mV Recharge Battery Hysteresis Voltage Table 3-7 Battery Charger 2.8 Typical Current Consumption Core Supply Voltage = 1.8V (buck output) @ 25℃ unless other specified. Item Condition Min. Typ. Max. Unit Transmit Peak Current TBD mA Receive Peak Current TBD mA 10 ms TBD mA 100 ms TBD mA 1.28 s TBD mA uA Sniff mode Deep sleep (disconnected, link loss state, wake on interrupt) buck off, wake on by all GPIOs Table 3-8 Typical Current Consumption The transmit and the receive current consumptions were measured directly on the buck output (1.8V at 25°C), while the sniff mode and deep sleep current was measured at battery output 2.9 Radio Characteristics 2.9.1 Transmitter Basic Data Rate Core Supply Voltage = 1.8V @ 25℃ Item Maximum RF transmit Power Min. *1 Typ. Max. Unit dBm Maximum RF transmit Power (Low power) dBm RF power control range 25 dB 20dB bandwidth for modulated carrier 1000 KHz +2MHz -20 dBm Adjacent channel transmit -2MHz -20 dBm power +3MHz -40 dBm -3MHz -40 dBm Frequency deviation Average deviation in payload 115 Maximum deviation in payload 140 175 KHz -75 75 KHz DH1 packet -25 25 KHz DH3 packet -40 40 KHz DH5 packet -40 40 KHz -20 20 KHz/50us Initial carrier frequency tolerance Drift Drift Rate Harmonic Content KHz -45 dBm Table 3-9 Transmitter Basic Data Rate *1 The maximum RF transmit power could reach 4dBm with appropriate settings Enhanced Data Rate Core Supply Voltage = 1.8V @ 25℃ Item Min. Typ. Max. Unit Relative transmit power -1.5 dB π/4 DQPSK max carrier frequency stability |ωo| -10 10 KHz π/4 DQPSK max carrier frequency stability |ωi| -75 75 KHz π/4 DQPSK max carrier frequency stability |ωo+ωi| -75 75 KHz 8DPSK max carrier frequency stability |ωo| -10 10 KHz 8DPSK max carrier frequency stability |ωi| -75 75 KHz 8DPSK max carrier frequency stability |ωo+ωi| -75 75 KHz 20 RMS DEVM π/4 DQPSK Modulation Accuracy 8DPSK Modulation Accuracy 99% DEVM Peak DEVM 35 RMS DEVM 13 99% DEVM In-band spurious emissions 99 99 Peak DEVM 25 F > F0 + 3MHz -40 dBm F < F0 - 3MHz -40 dBm F = F0 + 3MHz -40 dBm F = F0 - 3MHz -40 dBm F = F0 + 2MHz -20 dBm F = F0 - 2MHz -20 dBm F = F0 + 1MHz -26 dBm F = F0 - 1MHz -26 dBm EDR Differential Phase Encoding 99 Table 3-10 Transceiver Enhanced Data Rate 2.9.2 Receiver Basic Data Rate Core Supply Voltage = 1.8V @ 25℃ Item Sensitivity at 0.1% BER Sensitivity at 0.1% BER (Low Power) Min. Typ. Max. Unit 2.402GHz -89 dBm 2.441GHz -89 dBm 2.480GHz -89 dBm 2.402GHz -84 dBm 2.441GHz -84 dBm 2.480GHz -84 Maximum input power at 0.1% BER dBm -20 dBm Co-Channel interference 11 dB F = F0+5MHz -40 dB F = F0+4MHz -40 dB Adjacent channel selectivity F = F0+3MHz -40 dB C/I F = F0+2MHz -30 dB F = F0+1MHz dB F = F0 11 dB F = F0-1MHz dB F = F0-2MHz -20 dB F = F0-3MHz (Fimage) -9 dB F = F0-4MHz -20 dB F = F0-5MHz -40 dB -39 dBm -10 dBm Blocking @Pin=-67dBm with 2000-2400 MHz -27 dBm 2500-3000 MHz -27 dBm 3000-12750 MHZ -10 dBm Max. Unit Adjacent channel selectivity C/I Maximum level of intermodulation interference 30-2000 MHz 0.1%BER Table 3-11 Receiver Basic Rate Enhanced Data Rate Core Supply Voltage = 1.8V @ 25℃ Item Min. Typ. π/4 DQPSK -90 dBm 8DPSK -81 dBm Sensitivity at 0.01% EDR π/4 DQPSK -86 dBm (Low power) 8DPSK -77 dBm Sensitivity at 0.01% EDR Maximum input power at 0.1% π/4 DQPSK -20 dBm BER -20 dBm Co-Channel interference Adjacent channel selectivity C/I 8DPSK π/4 DQPSK 13 dB 8DPSK 21 dB π/4 DQPSK dB 8DPSK dB F = F0+1MHz F = F0-1MHz F = F0+2MHz F = F0-2MHz F = F0+3MHz F = Fimage π/4 DQPSK dB 8DPSK dB π/4 DQPSK -30 dB 8DPSK -25 dB π/4 DQPSK -20 dB 8DPSK -13 dB π/4 DQPSK -40 dB 8DPSK -33 dB π/4 DQPSK -7 dB 8DPSK dB Table 3-12 Receiver Enhanced Data Rate FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Module Warning Statement: This Bluetooth module is designed to comply with the FCC statement, FCC ID is: 2ADQG-AB1126. The host system using this module, should have label in a visible area indicated the following texts: “Contains FCC ID: 2ADQG-AB1126”. This radio module must not be installed to co-locate and operated simultaneously with other radios in host system, additional testing and equipment authorization may be required to operating simultaneously with other radio. This Bluetooth module has a PCB antenna. While this module has no shielding, and therefore the host equipment shall add a shielding function, and any host with module installed, has to be retested, then additional equipment authorization shall be achieved on the host equipment that has the module installed.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : Create Date : 2013:07:08 03:49:21Z Modify Date : 2014:12:11 11:58:39+08:00 Subject : Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Creator Tool : Nitro Pro 7 (7. 2. 0. 12) Metadata Date : 2014:12:11 11:58:39+08:00 Format : application/pdf Creator : Title : Description : Keywords : Producer : Nitro Pro 7 (7. 2. 0. 12) Document ID : uuid:db8a6474-23da-48e9-a1d5-dd55c4c7b778 Instance ID : uuid:f0453832-e2ea-4b8e-b212-09f5483edb9d Page Layout : OneColumn Page Mode : UseNone Page Count : 12EXIF Metadata provided by EXIF.tools