Dream Technology DT100V BLUETOOTH HEADSET User Manual

Dream Technology Co., Ltd. BLUETOOTH HEADSET

User Manual

02 Safety Notices and Warnings06Before Using the DeviceChecking Basic ComponentsChecking HeadsetCharging HeadsetStoring HeadsetChecking Compatibility with Mobile PhonesHow to Use16AppendixesFAQSpecifications and CharacteristicsBasic OperationWarrantyCONTENTS
302Safety Notices and WarningsPlease read the following carefully before using this product. It isrecommended all users should be fully aware of all safety notices andwarnings below for their safety and to prevent losses in their properties.Please keep the user manual in an easily accessible place. Safety NoticesContaminants on the charger and thebattery port may hinder charging. CleanBMX-550 with soft cloth. Do not usechemicals (such as alcohol, benzene,thinner, etc.) as chemicals may cause a fire.Keep the headset clean. Leaving the headset in a high-temperatureenvironment (such as inside a vehicle insummer, under direct sunrays, and near aheating device) for a long time may causeexplosion, fire, or distortion. However,using or storing the headset in a too coldplace may prevent proper functioning of theheadset or shorten the service life of theheadset. Store and use the headset at aroom temperature. Store and use the headset at aroom temperature. Children may suck or tear down theheadset, which may result inelectric shock,explosion, or exposure to theelectromagnetic interference. Headsetparts such as a rubber stopper may getstuck in the children's throat, which mayresult in suffocation. Keep the headsetaway from animals and children. Keep the headset away fromanimals and children.Use only certified accessories. Using abattery or a charger not certified by themanufacturer may reduce the service lifeand compromise the performance andsafety of the headset.Use only certified accessories.Warning: When serious injuries may occur due to improper use of the headset.
504Safety Notices and WarningsIn case the headset (BMX-550 ) or thecharger port has been submerged in wateror used in a humid place, the circuit may getdamaged resulting in electric chock orbreakdown. If the headset breaks downdue to the discoloring of the product, freerepair services will not be provided. Keep the headset away frommoisture or humidity. Do not dry the wet headset or battery usinga microwave, a heater, or a hair dryer toprevent explosion, distortion, and troublesas well as to guarantee user safety. Do notturn on the power and bring the wetheadset or battery to the customer center.If the headset got wet, do not drywith a heating device.The headset may interfere with high-frequency devices whichare usuallyused in airplanes or hospitals. Do not use theheadset in a place which does not allowuse of the headset (forexample, places where inflammable materials are stored andexplosion danger exists.) Do not use the headset in the airplane, hospital, orother places which do not allow use of the headset. Giving an excessive shock to the headset or dropping theheadset may cause breakdown or explosion. If the usermodifiedor disassembled the product withoutmanufacturer'sauthorization, free repair service will not beprovided.As the headset may interfere with other devices, it may not be used for theservices related to human safety. Do not modify, disassemble, or repair the headsetwithout manufacturer's authorization.The microwave and the wireless LAN use the same frequencyas the headset so using the headset near these devices maycause breakdown or generate noises. Do no use the headset near a microwave or awireless LAN.The product may get deformed or a fire or explosionmay occur.Do not leave the headset or the charger near or insidea heating device (such as a stove or a microwave.)
706Before Using the DeviceChecking Basic Components Checking HeadsetFigures included in the User Manual are designed to help users betterunderstand the product, and some figures may not reflect the actual product. Figures included in the User Manual are designed to help users betterunderstand the product, and some figures may not reflect the actual product.Charger User ManualSpeaker coverEarringPower/Call buttonChargerconnectorMicrophoneVolume buttonHand strapBluetooth headset
908Before Using the DeviceCharging HeadsetStoring HeadsetTurn off the headset when not in use and store itin a safe place. Do not place the head set under direct sunrays or in a place where thetemperature is higher than 50.Storing the headset at a high temperature will compromise the performance ofthe product and shorten the battery life.Store accessories provided with the product in a cool dry place.Caution : Charging the headset using an unauthorized chargermay cause damage or breakdown of the headset.Note : If you disconnectthe charger while the headset is beingcharged, the headset will be turned off and the chargingprocess will stop. While charging the headset, youcannot usethe headset. Checking Compatibility with Mobile PhonesThis headset is compatible with Bluetooth ver. 2.0 and can connect to mostBluetooth mobile phones which support headset or hands-free profile. Beforeconnecting the headset to your mobile phone, visit the mobile phonemanufacturer'swebsite and check whether the mobile phone supportsBluetooth.This headset is equipped with a battery.After purchasing this product, fully charge the battery.Connect the headset to the headset charger provided with it. 1. Connect the charger to the charger connector.2. Connect the power plug of the charger to the power outlet.Charge the headset till the light color is changed from red to blue.It takes around two hours to fully charge the headset.3. After fully charging the head set, disconnect the charger or take out the power plug. Caution : Some mobile phone may not be compatible with theheadset. Before purchasing a mobile phone, check whether the mobile phone is compatible with the headset.
11010Before Using the DeviceHow to UseHeadset On/OffConnecting HeadsetA Bluetoothmobile phone and a Bluetooth headset are connected to each otherthrough encrypted authentication process. When connecting the headset tothe Bluetooth mobile phone, you should register the headset as follows. 1. Check if the headset is off. (See Headset On/Off.)2. Press the Power/Call button for five seconds or until the blue light is turned on. Before Using the DeviceHeadsetOnPress the Power/Callbutton for threeseconds or until thelight blinks four times.A beep sound will beheard. While the power ison, the light willblink. Press the Power/Callbutton for threeseconds or until thelight blinks threetimes. After the headset isturned off, a beepsound will be heard. The light will stopblinking and theheadset will beturned off. HeadsetOffAction What do you hear? What do you see?LightCalling hours and standby hours depend on the mobile phone type and operating conditions.The blue light blinks every fiveseconds. The headset is on a call.The blue light blinks everyfive seconds. The headset is on standby.The red light blinks. The battery is not enough. The call maylast for about one minute.Status Description
13012Before Using the Device3. Search for the headset in the mobile phone by referring to the usermanual of the mobile phone. In most cases, the mobile phones provide options to set, connect, or search for Bluetooth devices. Search for the headset using this option.4. After the mobile phone detected the BMX-550 headset, register theheadset in the mobile phone. 5. Enter the password or PIN code in the mobile phone, and press OK button to connect the headset to the mobile phone.After connection is established, the light blinks in blue five times and thenblinks every five seconds.If connection is not established, repeat Steps 3 to 5 above. Making CallsMaking calls with voice (This function may differ depending on the mobile phone type.)If the mobile phone provides the voice calling function and is connected to theheadset through the hands-free profile, you will be able to make a call with voice.1. Press the Power/Call button briefly.2. After a beep sound, say the name of the person you are calling. (For more information, see the manual of the mobile phone.)NoteFor more information about connecting and adding a Bluetooth headset,see the user manual of the mobile phone. Wearing HeadsetYou can wear the headset in the ears.Adjust the earrings of the headset at 90degrees, and wear the headset.
15014Before Using the DeviceRedialing (This function may differ depending on the mobile phone type.)You can redial the number you have called most recently. When connected through hands-free profile:Recent Call History - Press the Power/Call button for one second.Call Connection - Press the Power/Call button briefly.When connected through headset profile:Recent Call History - Press the Power/Call button briefly.Call Connection - Press the Power/Call button briefly.Ending CallsPress the Power/Call button briefly.Receiving Calls (This function may differ depending on the mobile phone type.)When the bell rings, press the Power/Call button briefly.If you received a call using the keypad of the mobile phone, press the Power/Call button briefly to switch the call to the headset.Volume ControlPress the volume button on the side of the headset to increase thevolume or to lower the volume. Rejecting Call(This function may differ depending on the mobile phone type.)When the bell rings, press the Power/Call button for one second.The headset must be connected to the mobile phone through hands-free profile.Depending on the setting of the mobile phone, the automatic answeringfunction will be activated or the bell sound will be muted.ReconnectingIf you move away from the mobile phone by more than 33 feet, "toot"sound will be generated and the call will be disconnected. If you moveclose to the mobile phone within 20 seconds, you will be reconnected to themobile phone. In order to reconnectafter 20 seconds, move within 33 feetdistance and press the Power/Call button briefly. Using Supplementary FunctionsWhen connected through hands-free profile, you can use supplementaryfunctions as described below. Call WaitingWhen another call arrivesduring a call, press the Power/Call button for one second. To switch between the calls, press the Power/Call buttonfor one second.Turning Off MicrophoneTo turn off the headset microphone, press the volume button [or] for one second. To turn on the headset microphone, press the volumebutton [or] for one second.Note Pressing the Power/Call button too long may turn off the headset.When the volume reaches the maximum/minimum level bypressing the volume button or , "toot" sound will begenerated.Note
19B18AppendixBasic OperationWhen you press [] key, tootsound will begenerated.Operation Operation ActionsTypeBasicOperationTurning on the powerWhile the headset is off, press thePower/Call button for three seconds.ReceivingCallsMakingCallsCommonFunctionsReceiving a call Briefly press the Power/Call button when acall arrives.Making a call Briefly press the Power/Call button afterentering the phone number.Recent call history(This function maydiffer depending onthe mobile phone)When connected through hands-free profile - Press the Power/Call button for one second.When connected through headset profile - Briefly press the Power/Call button.Voice recognition(This function maydiffer depending onthe mobile phone)When connected through hands-free profile - Briefly press the Power/Call button.When connected through headset profile - Not supported.Rejecting a callWhen connected through hands-free profile -Press the Power/Call button for one second.When connected through headset profile - Not supported.Entering theconnection mode Press the Power/Call button for about fiveseconds till the light is turned on in blue. Turning off the power While the headset is on, press the Power/Callbutton for three seconds.Connecting a device See the manual of the corresponding device.Volume control Press the volume button [or ].Maximum volume When you press [] key, tootsound willbe generated.CommonFunctionsChargingMinimum volumePress the volume button [or ] for onesecond during a call.MutePress the volume button [or ] for onesecond.UnmuteBriefly press the Power/Call button. (Youcan switch to the headset only once if youreceived the call with the mobile phone.)Switching betweenmobile phone andheadsetBriefly press the Power/Call button duringthe call.Disconnecting a callPress the Power/Call button for one secondwhen another call arrives during a call.(Some mobile phones do not support this Call waitingPress the Power/Call button for one second.Switching to awaiting callWhen the charger voltage is 2.9V or less,warning sound will be generated. (If the chargervoltage is 2.7V or less, the power will beautomatically turned off after a few seconds.)Low-voltage warningThe light is turned on in red while the batteryis being charged. ChargingThe light is turned on in blue after the batteryis fully charged.Upon completion ofchargingOperation Operation ActionsType
Dream Technology Co., LTD Bluetooth The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Samsung is under license. Other trademarks and trade names are those of their respective owners. Warranty and parts replacement Samsung warrants that product as free of defects in material, design and workmanship for the period of one year from the original date of purchase. If during the period of warranty this product proves defective under normal use and service you should return the product to the retailer from whom it was originally purchased or qualified service center. The liability of Samsung and its appointed maintenance company is limited to the cost of repair and/or replacement of the unit under warranty. z The warranty is limited to the original purchaser z A copy of your receipt or other proof of purchases is required for a proper warranty service. z The warranty is void if the serial number, date code label or product label is removed, or if the product has been subject to physical abuse, improper installation modification, or repair by unauthorized third parties z The responsibility of Samsung products shall be limited to the repair or replacement of the product at its sole discretion. z Specifically exempt from any warranty are limited-life consumable components such as batteries and other accessories. z Samsung is not liable to for any incidental or consequential damages arising from the use or misuse of any Samsung product z This warranty gives you specific rights and you may have other rights which vary from area to area. z Unless otherwise instructed in the User Guide, the user may not, under any circumstance, attempt to perform service, adjustments or repairs on the unit, whether in or out warranty. It must be returned to the purchase point, factory or authorized service agency for all such work z Samsung will not assume any responsibility for any loss or damage incurred in shipping. All repair work on Samsung products by unauthorized third parties voids any warranty.
Dream Technology Co., LTD Correct disposal of this product (Waste Electrical & Electronic Equipment) This marking shown on the product or its literature, indicates that it should not be disposed with other household wasted at the end of its working life . To Prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recyling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. FCC NOTICE Section 15.19 Labelling requirements This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference and 2) This device must accept any interference received, including interference that may cause undesired operation. Section 15.21 Information to user The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. * IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user’s authority to operate the device.

Navigation menu