Dreamlink E Commerce HB-01 Bluetooth Headset User Manual

Dreamlink E-Commerce Co.,Limited Bluetooth Headset

Contents

User Manual

LinkWitz Bluetooth Wired/Wireless Stereo Headphones Model: HB-01 USER MANUAL
Thank you for purchasing this Bluetooth headphone. Please read the instructions and warnings carefully before use to ensure safe and satisfactory enjoyment of this product. Important safety information Adjust the headphone sound to the proper volume. Loud sound may damage your ears. Don’t turn the volume so high that you can’t hear what’s around you. Use carefully or temporarily discontinue use in potentially hazardous situations. Do not use the headphone while riding a bicycle, motor bike, or while driving a car. The use of headphones in this way may create a traffic hazard and is illegal in many areas. No exposure to fire or toss the headphone into a fire. It will probably cause an accident. Don't disassemble the headset any if you are not an expert. Place out of reach of small children to prevent accidental ingestion of small parts. Warning This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filled with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture. To prevent a fire hazard, do not place any naked flame sources (such as lighted candle) on the equipment. Description of the appliance
Power on / off 1. In the power-off state, long-press the “Multi-function Button” for 3 seconds until the indicator flashes alternately red and blue, and the prompt of the headphone sounds. At this time, the headphone is turned on. 2. In the power-on state, long-press the “Multi-function Button” for 3 seconds, and the prompt of the headphone sounds. At this time, the headphone is turned off, and the indicator goes out.
Bluetooth pairing steps: 1. Please control the distance between Bluetooth headphone and mobile phone (or other devices used for connection) to be within 1 m, the closer it is, the better effect will be; 2. In the power-off state, long-press the “Multi-function Button” for 3 seconds, and then the prompt of the headphone sounds. At this time, the indicator flashes alternately red and blue, and the headphone is turned on; 3. Turn on the Bluetooth search function of the mobile phone or other required connection device, and the mobile phone will prompt that the device has been found; 4. Select “HB-01” (For some mobile phones, it needs to enter “0000” as the pairing password, the Bluetooth headphone will automatically connect to the mobile phone, and the blue light will flash.) Connect headphones to two mobile phones 1. After successfully pairing with a mobile phone, turn off the Bluetooth of the first mobile phone, long-press the “Multi-function Button” of the headphone for 3 seconds, and turn off the headphone; 2. Pair with the second mobile phone according to the step of pairing with the
first mobile phone; 3. Turn on the Bluetooth of the first mobile phone and select “HB-01” to complete the pairing with the two mobile phones. Notes: A. When the paired device is in Bluetooth on state and within the connection range, it can be automatically connected back to the last connected device only by turning on “HB-01”. If it cannot be connected back, please open the Bluetooth menu of the Bluetooth device and click on the connected “HB-01” to connect back. B. If the pairing time exceeds 5 minutes, the headphone will automatically shut down; Back to the effective distance within 3 minutes beyond the effective connection range can automatically connect back to the last connected device; C. When two mobile phones are connected at the same time, the two phones cannot play music at the same time. It needs to suspend the playing music of one phone before the other phone can continue to play music. Both phones can carry out Bluetooth call function, and the remaining power of Bluetooth headphone can be displayed on iPhone. Connect and hang up the phone Answering: When there is an incoming call after the mobile phone is connected to the headphone, the headphone will prompt. Press the “Multi-function Button” once to answer the incoming call; Or use your phone to answer the call directly. Hanging up: When your phone is busy, you can press the “Multi-function Button” of the headphone once to hang up the call. Or hang up your phone directly. Refusing to answer: When you hear an incoming call, the headphone will prompt. At this time, press the “Multi-function Button” for 2 seconds to refuse the call. Or use your phone to refuse to answer the call. Recall the last number: Double-click the “Multi-function Button” to dial the last number the phone dialed. Power prompt: When the “HB-01” Bluetooth headphone is low in power, there will be a “Beep” warning tone, and the red light of the indicator will flash rapidly at this time. Play / pause While the headphone is playing music, click the “Multi-function Button” to pause the music playing. Click “Multi-function Button” again to resume music playback.
Skip Songs When playing music, click “<” to select the previous music; Click “>” to select the next music. Activate the Siri function of iOS When the HB-01 Bluetooth headphone is linked to iOS Apple Bluetooth device, double-click the “>” to activate or awaken the Siri function.
Volume up / down When playing music, push the “Volume Knob” clockwise to increase the volume. Push the “Volume Knob” counterclockwise to lower the volume.
Restore factory setting: When charging in the power-off state, long-press the “Multi-function Button”, and the blue indicator flashes twice to restore the factory settings. Product parameters: Bluetooth version V4.1 Support Bluetooth protocol HFP, HSP, AVRCP, A2DP Bluetooth operating frequency 2.402-2.480 GHz Receiving sensitivity -80dBm Bluetooth distance ≥ 10 M Long-time standby 300 hours Call duration About 27 hours Play duration About 24 hours Charging duration About 3.5 hours
Troubleshooting Problem Remedy Power won’t turn on Recharge the wireless headphones The batteries will not charge Confirm that computer is ON. Confirm that computer is not in power-saving mode. Confirm that accessory micro-USB cable is securely connected to both the wireless headphone and computer. Can’t perform pairing Place the wireless headphones and Bluetooth device closely together when performing pairing Can’t perform Bluetooth connection Confirm that power is turned on for both wireless headphones and Bluetooth device. Confirm that Bluetooth function is turned ON in the device you are connecting to No sound when playing music Confirm that power is turned on for both wireless headphones and Bluetooth device. Confirm that connection with Bluetooth device is set for profile A2DP. Confirm that the connected music playback device is set for PLAY. Confirm that sound volume controls on both wireless headphones and music playback device are set to appropriate levels. Sound is distorted when playing music Check that no other devices utilizing the 2.4GHz wavelength are nearby, and that no obstructions black the signal path. Can’t use the hands-free operation Confirm that wireless headphones and Bluetooth device are connected using the profile HFP or HSP. If connection that to the Bluetooth device is in profile A2DP, it may be necessary to change connection profiles (depending on the specifications of the Bluetooth device). Communication distance is short, sound is garbled. Check that no other devices utilizing the 2.4GHz wavelength (including microwave ovens, wireless radios, etc.) are nearby. and that no obstructions block the signal path.
FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Navigation menu