Drift Innovation FD9960 Wireless Camera Ghost S with Remote Control User Manual P2F FD9960 Rev0

Download:
Mirror Download [FCC.gov]
Document ID	2130760
Application ID	wNTTNY2cqOGsox6slCylSA==
Document Description	P2F-FD9960_User Manual_Rev0
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	75.36kB (941998 bits)
Date Submitted	2013-11-29 00:00:00
Date Available	2013-11-29 00:00:00
Creation Date	2013-08-28 13:23:16
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2013-11-29 18:40:29
Document Title	P2F-FD9960_User Manual_Rev0
Document Creator	Adobe InDesign CS6 (Windows)

follow us
facebook.com/driftinnovation
vimeo.com/driftinnovation
instagram.com/drift_innovation
twitter.com/driftinnovation
DRIFTINNOVATION.COM
quick guide
contents
Thank you for purchasing the Drift Ghost-S
CUSTOMER SUPPORT
about your camera | initial setup
3—4
package contents | getting started
5—6
Check our official website for firmware updates, customer
support, news about our products and videos from our users.
mode selection & settings
If you have any suggestions, comments or concerns, please
contact our customer support team at:
support@driftinnovation.com
features & new features
11—12
using the two-way remote | accessory guide
13—14
wifi & firmware | connecting the camera
15—16
WARRANTY
To obtain our warranty service, register your product at:
driftinnovation.com/warranty
playback & camera settings | mounting the camera
7—8
9—10
specifications
17—18
disclosures
19—20
about your camera
initial setup
MENU / Tag / Back Button
LEFT Button / Zoom Out
RIGHT Button / Zoom In
ACTION Button
(On/Off/Rec/Stop)
Status LED
Rear Hatch
2.0” LCD Screen
1. Unscrew and remove the
rear hatch
2. Insert a Class 6 or higher
Micro SD/HC/XC card (up
to 64GB) Format before
first usage!
3. Lift the hinged battery
slot cover and insert the
battery as shown (below)
4. Connect the camera
via mini USB cable to a
powered USB port and
charge the battery for 4
hours before first use
5. Charge the remote via
mini USB cable
6. Replace the rear hatch
and screw shut to secure
300° Rotating Lens
USB Port (Mini-B)
HDMI Port (Mini-C)
3.5mm Microphone Input
-MONO
Micro SD Card Slot
Battery Slot Cover
package contents
getting started
Remote Control
Rechargeable Battery
Connector Hatch
Wrist Strap
Universal Clip
Mount Kit
Goggle Mount
USB Cable (Mini-B)
Microphone Extension Cable
POWER ON AND OFF
1. Press and hold the
ACTION button to
power on
2. The screen will power
on, show the welcome
display, then Live Preview
3. The camera is now ready
to record video, or take
still photos
4. The current camera mode
is indicated by the icon in
the top left of the display
and by the LED indicator
(for details, see p7-8)
5. To power off, press
and hold the ACTION
button for 3 seconds
*Note: The camera will power on in the same mode it powered off in.
MAIN MENU
Press the MENU button to
enter the Main Menu. The
screen will display the icons
of the four menu options.
Use the LEFT/RIGHT buttons
to highlight menu options;
press the ACTION button to
select an option.
Mode Selection
Playback
Mode Settings
Settings
mode selection & settings
Video
Timelapse
Photo
MODE SELECTION MENU
The Mode Selection menu
displays the icons for the
four camera modes.
Highlight the desired mode
and press ACTION.
The screen will return
to Live Preview and the
camera is ready to record.
VIDEO MODE
(Green LED) The camera
will record video when
ACTION is pressed on the
camera or remote. The
LED will flash red while
recording. Press ACTION on
the camera, or STOP on the
remote, to end recording.
PHOTO MODE
(Yellow LED) The camera
will capture still images
when ACTION is pressed
on the camera or remote.
The LED will blink red every
time a photo is taken (this
applies for Timelapse and
Photoburst modes also).
TIMELAPSE MODE
(Purple LED) The camera
will capture a series of still
images at a specified rate
when ACTION is pressed
on the camera or remote.
To stop recording, press
ACTION on the camera or
STOP on the remote.
PHOTOBURST MODE
(Cyan LED) The camera
will capture a burst of still
images for an allotted
duration, at a specified
rate, when ACTION on the
camera or remote is pressed
(for best results, use a Class
6 or higher micro SD card).
MODE SETTINGS
The Mode Settings menu
displays the icons for the
settings of the four camera
modes. Highlight the
desired mode and press
ACTION. The screen will
show the list of settings for
the chosen mode.
VIDEO SETTINGS
• Video Resolution
• Frame Rate
• FOV
• Exposure
• Self-Timer
• Scene Mode
• Video Tagging (see p10)
• Car DVR
• Default Settings
PHOTO SETTINGS
• Photo Resolution
• FOV
• Exposure
• Self-Timer
• Scene Mode
• Default Settings
TIMELAPSE SETTINGS
• Photo Resolution
• FOV
• Exposure
• Sequence Interval
• Self-Timer
• Scene Mode
• Default Settings
PHOTOBURST SETTINGS
• Photo Resolution
• FOV
• Capture Rate
• Burst Duration
• Exposure
• Self-Timer
• Scene Mode
• Default Settings
Photoburst
playback & camera settings
CAMERA SETTINGS
PLAYBACK
Selecting the Playback icon
opens the Mode Selection
menu, and display the four
camera mode icons.
• Wi-Fi
• Mic Sensitivity
OFF / LOW / MED / HIGH
The number of videos or
photos is displayed beside
each camera mode icon.
• Speaker Volume
OFF / LOW / MED / HIGH
ON / OFF
• Wi-Fi Network Name
• WiFi Password
GHOST-S [000]
----
• LCD Brightness
LOW / MED / HIGH
• LCD Off OFF / 5S / 10S / 20S / 1MIN / 5MIN
Selecting a mode will display
the most recent video or photo,
timelapse or photoburst folder.
• Remote Control
• Remote LED
ON / OFF
Navigate through the files
using LEFT/RIGHT. To play a
video, or open a timelapse or
photoburst sequence, press
the ACTION button.
Press MENU to go back.
• Camera LED
ON / OFF
mounting the camera
• Remote Pairing
• Digital Zoom
YES / NO
ONE-ONE / ONE-ALL
• HDMI frame Rate
60 / 59.97 / 50 / 30 / 29.97 / 25
• Date
• Date / Timestamp
• Language
• Save Settings
YEAR / MONTH / DAY
ON / OFF
(list of languages)
A/B/C
• Reset Settings
YES / NO
• Firmware Version
2. Slide the Universal Clip
into your chosen mount,
ensuring that it ‘clicks’
into place
*Double check it has been
fully inserted by pushing
out the clips
3. Align your shot. Rotate
the lens by hand until
the screen is orientated
correctly. Use the
lens marker as an ‘up’
reference.
A/B/C
• Load Settings
• Format Memory Card
1. Attach the Universal Clip
to the camera in any 360°
orientation as needed—
first position the clip in
the desired orientation,
then secure by rotating
the screw base by hand
YES / NO
CURRENT VERSION
ON / OFF
• Camera Off
OFF / 2MIN / 5MIN
• HDMI Out Resolution
1080p / 1080i / 720p
10
features
CLONE MODE [NEW]
Connect to multiple
cameras with the new clone
mode feature. Through
Wi-Fi all cameras within the
vicinity of each other will be
able to “see” each other and
communicate their current
settings and recording
modes to each other. The
result is a synchronisation
between cameras, if one
camera starts recording, all
synced cameras will record
- this feature is perfect for
capturing multiple angles.
Clone mode is compatible
with the Ghost-S and
Stealth II
11
features
SIMULTANEOUS PHOTO
While recording video,
pressing the MENU button
will simultaneously take an
8mp still photo.
When using the two-way
remote control, press the
ACTION button for the
same result.
This feature is not available
when Video Tagging (left) is
enabled.
CAR DVR MODE
This hands off mode setting
is ideal for insurance and
security purposes. In this
mode the camera records
footage in a continuous
loop style (DVR Intervals)
recording loop after loop
until it fills the Micro SD
Card. Once full, the oldest
loops will be deleted as the
newest ones are saved. DVR
loop intervals can be 1min,
3min, 5min, 10min or 15min
intervals.
BIT RATE [NEW]
Users can select to keep the
normal compression used
by the H.264 codec, or if
they prefer, allow a higher
flow of data for preserving
more of the original
recording. This will result in
a higher file size.
MODE INDICATOR
The Drift Ghost-S features
our multi-coloured active
statusTM indicator light
system. There are LED
indicators positioned on
both the 2-way remote
control and the front face of
the camera, these change
colour depending on the
current camera mode.
SCENE MODE [NEW]
Choose your recording
conditions with scene
mode select between
Normal / Vivid / Low Light
SETTING PROFILES
All camera settings can be
saved by selecting Save
Settings from the Camera
Settings menu and choosing
a save profile: A, B or C.
Profiles can be loaded by
selecting Load Settings from
the menu, then A, B or C.
VIDEO TAGGING
When activated, this feature
allows the camera to
continuously record video,
but only saving on ‘tagging’
important footage.
While recording video,
pressing the MENU button
will tag and save past,
present and future video.
For example, with a video
tagging interval of 30s
selected, on pressing MENU
while recording, the camera
will save the previous 30s,
the current 30s and an
additional 30s—a total of
1m30s of ‘tagged’ footage.
The Video Tagging feature
requires a class 10 micro
SD card with 4GB of
free space to function
correctly.
12
using the two-way remote
The Remote is NOT waterproof.
ACTION button
STOP button
USB charging port
(Remove covering before use)
13
POWER ON AND OFF
1. Hold the ACTION
button to power on
2. The colour of the remote
control’s LED indicator
will show the current
camera mode
3. The remote will
automatically power
off if it does not find a
camera after 15s
4. To charge, connect the
remote control via the
mini USB cable provided
to a powered USB port
USING THE REMOTE
While the camera and remote
are on and paired, pressing
ACTION will begin recording
video, capture a photo, start
timelapse or photoburst,
depending on the camera
mode. Pressing STOP will end
video or timelapse recording.
Pressing ACTION while
recording video will capture a
photo, or start Video Tagging
(if activated, see p10). Pressing
STOP will end recording.
The LED will blink blue to
confirm a signal between
camera and remote.
Pressing STOP while the
camera is in Live Preview
will toggle between camera
modes, indicated by LED
colour (see p 7-8).
accessory guide
SHOULDER MOUNT
HD GHOST
WATERPROOF CASE
The mount allows you to
go hands-free while still
capturing all the action. The
harness is fully adjustable
and the detachable shoulder
mount is suitable for both left
and right handed users.
The Drift HD Ghost waterproof
case is perfectly suited for all
aquatic activities. The dual
locking system ensures the
Drift HD Ghost is always
securely sealed and dry down
to 60m.
For full accessory list visit driftinnovation.com
DRIFT TIME LAPSE
The Drift TimeLapse allows
you to capture photo
TimeLapse sequences and
is enabled to rotate 360°
in 60 minutes perfect for
capturing all the action,
whether up in the mountains
or down on the beach.
14
wifi
TURNING ON AND OFF
In the Camera Settings
menu, highlight the ‘WiFi’
option and press ACTION,
and select P and press
ACTION.
In Live Preview, wait for the
WiFi indicator icon @ to
show WiFi is enabled then,
on your WiFi device, select
the network:
‘Ghost-S [000]’.
The three digit network
name can be changed from
the general settings menu.
A Micro SD card must be
installed to allow WiFi to
work.
15
DOWNLOAD THE DRIFT APP
Shot setup, record,
capture & playback
on your device.
firmware
connecting the camera
UPDATING THE FIRMWARE
Download the latest firmware
from the Drift website and
copy the Ghost_S.bin file to a
formatted micro SD card.
Insert the micro SD card
into the camera and power
on. The camera screen will
display ‘Firmware Updating’
as the update is installed.
Once complete, the camera
will power down. To check
the firmware has updated
correctly, power the camera
on and, from the Main menu,
open the Camera Settings
menu and select ‘Version’ to
view the current firmware.
CONNECTING TO A PC
1. Connect the camera
using the USB cable
(provided); the camera
screen will show a USB
icon
2. The camera’s folder may
open automatically; if
not, open My Computer
3. The camera should
be recognised as a
removable disk; doubleclick to open
4. Open the DCIM folder to
access your files
CONNECTING TO A MAC
1. Connect the camera
using the USB cable
(provided); the camera
screen will show a USB
icon
2. The camera’s folder may
open automatically; if
not, open Finder
3. The camera should be
recognised as a external
device; double-click to
open
4. Open the DCIM folder to
access your files
CONNECTING TO A TV
1. While the camera is
powered off, connect
the camera using a mini
HDMI (Type C) to full
HDMI cable, available
from Drift retailers.
2. Power on the camera
3. The camera’s display will
now show on the TV
and playback of video
or photos will show on
screen; video sound
will come out of the TV
speakers
! While charging only (not through a computer), press ACTION to return to Live Preview
16
specifications
Video resolution:
File format:
Sensor type:
Frame rate:1080p:
960p:
720p:
WVGA:
Field of view (diagonal):1080p:
960p:
720p:
WVGA:
Lens focal range:
Lens rotation:
Zoom:
Photo mode:
Exposure:
17
1080p, 720p and WVGA (16:9); 960p (4:3)
.MP4 (H.264 codec)
CMOS
25 / 30 / 50 / 60 fps
25 / 30 / 48 / 50 / 60 fps
25 / 30 / 50 / 60 / 100 / 120 fps
25 / 30 / 50 / 60 / 100 / 120 / 200 / 240 fps
90° / 127° / 160°
160°
160°
160°
0.5m to infinity
300°
×10 (digital)
5 / 8 / 12 megapixels
Auto / Manual (advanced users)
LCD Screen:
LCD Screen Cover:
Waterproof
Microphone:
Memory capacity:
Inputs:
Outputs:
Connectivity:
Compatibility:
Remote range:
Radio frequency:
Camera:Dimensions:
Weight:
Power:
Remote control:Dimensions:
Weight:
Power:
2.0” colour TFT
Corning® Gorilla® Glass
3m (9.84ft)
Built-in, noise reducing microphone
Micro SD memory cards up to 64GB
3.5mm external microphone (extension included)
HDMI connector type C (cable not included)
USB Plug and Play, mini-B USB connector
Windows XP and up / Mac OS 10.2 and up
10m (32.81ft)
2.4G
105 (L) × 52 (W) × 33 (D) mm
172g
1700mAh rechargeable lithium-ion battery (included) (DC 3.7V)
59 (L) × 48 (W) × 12 (D) mm
22g
350mAh rechargeable lithium-ion battery (DC 3.7V)
18
disclosures
FCC Information
This device complies with Part
15 of the FCC Rules.
Operation is subject to the
following two conditions:
(1) this device may not cause
harmful interference, and
(2) this device must accept
interference received, including
interference that may cause
undesired operation.
WARNING
Changes or modifications to
this unit not expressly approved
by the party responsible for
compliance could void the
user’s authority to operate the
equipment.
19
The equipment has been
tested and found to comply
with the limits for a Class B
digital device, pursuant to Part
15 of the FCC Rules. These
limits are designed to provide
reasonable protection against
harmful interference in a
residential installation. This
equipment generates, uses,
and can radiate radio frequency
energy and, if not installed
and used in accordance with
the instructions, may cause
harmful interference to radio
communications. However,
there is no guarantee that
interference will not occur
in a particular installation. If
this equipment does cause
harmful interference to radio or
television reception, which can
be determined by powering the
equipment on and off, the user
is encouraged to try to correct
the interference by one or more
of the following measures:
Reorient or relocate the
receiving antenna;
Increase the separation
between the equipment and the
receiver;
Connect the equipment into
an outlet on a circuit different
from that which the receiver is
connected;
Consult the dealer or an
experienced radio / TV
technician for help.
This device complies with
Industry Canada licenseexempt RSS standard(s).
de l’intervention, y compris
l’intervention qui peut causer
l’opération non désirée de.
Operation is subject to the
following two conditions:
(1) this device may not cause
interference, and
(2) this device must accept
any interference, including
interference that may cause
undesired operation of the device.
Cet appareil numérique de la
classe [B] est conforme à la
norme NMB-003 du Canada.
This Class [B] digital apparatus
complies with Canadian
ICES-003.
Son fonctionnement est soumis
aux deux conditions suivantes:
(1) cet appareil ne peut pas
causer l’intervention, et
(2) cet appareil doit accepter
Cet appareil s’accorde avec
Industrie Canada licenceexempte RSS standard.
FCC RADIATION EXPOSURE
This equipment complies with
FCC radiation exposure limits
set forth for an uncontrolled
environment .
This transmitter must not be
co-located or operating in
conjunction with any other
antenna or transmitter.
MOTORCYCLE DISCLAIMER
Interacting with the camera
while riding could cause a
crash and you or others may be
seriously injured or killed.
• Keep your eyes and mind on
the road;
• Avoid looking at the camera
for too long;
• Stop the vehicle in a safe
location before adjusting the
camera.
20
This device was tested for typical body‐worn operations. To comply with RF exposure
requirements, a minimum separation distance of 5 mm must be maintained between the
user’s body and the device, including the antenna. Third‐party belt‐clips, holsters, and similar
accessories used by this device should not contain any metallic components. Body‐worn
accessories that do not meet these requirements may not comply with RF exposure
requirements and should be avoided.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
Tagged PDF                      : No
XMP Toolkit                     : 3.1-701
Create Date                     : 2013:08:28 13:23:16+01:00
Metadata Date                   : 2013:11:29 18:40:29+08:00
Modify Date                     : 2013:11:29 18:40:29+08:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:a3d72162-69bb-4530-a5a2-5223a8005fbc
Original Document ID            : xmp.did:09801174072068118083BCD6E624D8BF
Document ID                     : xmp.id:D7FA24C3DB0FE311BB5A97E069C8AC62
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:D5FA24C3DB0FE311BB5A97E069C8AC62
Derived From Document ID        : xmp.did:8BC079E44200E3119E2AAB04C399808D
Derived From Original Document ID: xmp.did:09801174072068118083BCD6E624D8BF
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2013:08:28 13:23:16+01:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 12
Creator                         : Adobe InDesign CS6 (Windows)

EXIF Metadata provided by EXIF.tools