Drive Medical Design Mobility Aid 11120Kd 1 Users Manual

11120kd-1 to the manual daf8ccbc-ed81-4ef7-b24f-84480d8435ae

2015-02-04

: Drive-Medical-Design Drive-Medical-Design-Drive-Medical-Design-Mobility-Aid-11120Kd-1-Users-Manual-514800 drive-medical-design-drive-medical-design-mobility-aid-11120kd-1-users-manual-514800 drive-medical-design pdf

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadDrive-Medical-Design Drive-Medical-Design-Drive-Medical-Design-Mobility-Aid-11120Kd-1-Users-Manual- Drive-medical-design-drive-medical-design-mobility-aid-11120kd-1-users-manual
Open PDF In BrowserView PDF
lifetime limited
warranty
Your Drive brand product is warranted to be free
of defects in materials and workmanship for the
lifetime of the original consumer purchaser.
This device was built to exacting standards and
carefully inspected prior to shipment. This Lifetime
Limited Warranty is an expression of our confidence in the materials and workmanship of our
products and our assurance to the consumer of
years of dependable service.

wheeled, drop arm
commode
item 11120KD-1

In the event of a defect covered by this
warranty, we will, at our option, repair or replace
the device.
This warranty does not cover device failure
due to owner misuse or negligence, or normal
wear and tear. The warranty does not extend to
non-durable components, such as rubber
accessories, casters, and grips, which are subject
to normal wear and need periodic replacement.
If you have a question about your Drive device or
this warranty, please contact an authorized Drive
dealer.

www.drivemedical.com
© 2006 Medical Depot, Inc. All rights reserved.
Drive is a trademark of Medical Depot, Inc.
Port Washington N.Y. 11050 USA Made in China

commode assembly
instructions and precautions
Back
Support
Arm

Bucket
Frame

Bucket

assembling commode
1.	 Remove contents from box.
2.	 Attach front cross brace to top of wheeled leg
	 section by depressing push button and sliding into
	 place. A snap will be heard when cross brace is in
	 place. Repeat for back cross brace.
3.	 Attach second wheeled leg section to cross braces.
4.	 Insert back support and arm section into frame. 	
	 Tighten knobs.
5.	 To drop arm, depress release button on arm and
	 gently allow to drop until reaching arm stop.
6.	 Attach lower frame support and tighten knob.
7.	 Attach footrests to front of frame using nuts and
	 bolts provided.
8.	 Install commode bucket by placing it in grooves in
	 bucket frame.
9.	 Align the toilet seat clamps onto the back frame rail.
	 (Both clamps should sit outside the pail brackets).
	 Push down on seat until clamps snap firmly
	 into place.
10.	 When removing the seat grasp the back of the seat
	 and lift.

additional precautions
Release
Button
FIGURE 1

Footrests
Lower Frame
Support

1.	
	
	
2.	
	
	
	
	
	
3.	
	
	
4.	
5.	
	

Toilet seat must be in down position before use. Failure
to do so may result in breakage of commode and
possible injury.
Do NOT install commode without first reading and
understanding this assembly and instruction sheet. If
you can not understand these instructions, contact a
healthcare dealer or technical professional before
attempting to install. Otherwise, injury or damage
may occur.
Inspect all parts for shipping damage before assembly.
If there is shipping damage - DO NOT USE.
Contact dealer/carrier for further instructions.
Ensure ALL screws, nuts and/or bolts are tightened.
Users with limited physical strength should be supervised
or assisted while using commode.
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1.1-111
Instance ID                     : uuid:8f7ba020-7ff5-11db-8128-00145169424e
Document ID                     : adobe:docid:indd:8c6cac9b-7bae-11db-86e9-dcd0947474f5
Rendition Class                 : proof:pdf
Derived From Instance ID        : 42a590fc-762d-11db-9225-bdc80894f42d
Derived From Document ID        : adobe:docid:indd:dcc39614-7628-11db-9225-bdc80894f42d
Manifest Link Form              : ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 72.00, 300.00
Manifest Placed Y Resolution    : 72.00, 300.00
Manifest Placed Resolution Unit : Inches, Inches
Manifest Reference Instance ID  : uuid:1DF01EE6CB1FDA11978CFFDAC505B7F7
Manifest Reference Document ID  : uuid:9A472EFDB11FDA11978CFFDAC505B7F7, adobe:docid:photoshop:4583f2c8-1a2a-11db-bf8c-e7c6385217fd
Create Date                     : 2006:11:29 17:04:08-05:00
Modify Date                     : 2006:11:29 17:04:18-05:00
Metadata Date                   : 2006:11:29 17:04:18-05:00
Creator Tool                    : Adobe InDesign CS2 (4.0.4)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 14832 bytes, use -b option to extract)
Format                          : application/pdf
Producer                        : Adobe PDF Library 7.0
Trapped                         : False
Page Count                      : 2
Creator                         : Adobe InDesign CS2 (4.0.4)
EXIF Metadata provided by EXIF.tools

Navigation menu