Duali BLP-A04-NR06 Smart Card Reader User Manual

Duali Inc. Smart Card Reader

User Manual

Model Name BLP-A04-NR06 Doc. Number EP01-15-003 Code 0 Date 2015.03.18 Drafter Minyoung Jo Approver Taeyang Ha Title Product Specifications DUALi Inc. 1/9 Model Name : BLP-A04-NR06 Document No. : EP01-15-003 Draft review Approval Distributor : . Product Specification Original General
Model Name BLP-A04-NR06 Doc. Number EP01-15-003 Code 0 Date 2015.03.18 Drafter Minyoung Jo Approver Taeyang Ha Title Product Specifications DUALi Inc. 2/9 Revision History No. Date PAGE Contents 1 15.03.18 all First edition 2 3 4 5 6 7 8 9 10 11 12 12 13 14 15 16
Model Name BLP-A04-NR06 Doc. Number EP01-15-003 Code 0 Date 2015.03.18 Drafter Minyoung Jo Approver Taeyang Ha Title Product Specifications DUALi Inc. 3/9 Overview 1.1 Product overview PS/SC mode is used for this RFID card reader. (SO14443 TYPE-A) This reader adopts ARM7 of STMicroelectronics. 1.2 Product specification ITEM Specifications Remark CPU STM32F072C8U6 Cortes-M3(ARMv7), 32bit RISC Program Memory 64KByte FLASH Data Memory 16KByte SRAM DISPLAY Status LED *2 Communication MINI USB Card Type ISO-14443 A Input voltage Mini USB Power(5V, 200mA over) 1.3 RF PART Specifications ITEM SIC9410 Specification Remark RF 13.56MHz Card communication speed 106,212,424,847 Kbps Subcarrier 847 KHz Using voltage 5V, 3.3V
Model Name BLP-A04-NR06 Doc. Number EP01-15-003 Code 0 Date 2015.03.18 Drafter Minyoung Jo Approver Taeyang Ha Title Product Specifications DUALi Inc. 4/9 2 Exterior Specifications 2.1 Exterior of device 2.2 Size of device - 90(W) *90(H) * 26(D) mm MINI USB BLUE LED
Model Name BLP-A04-NR06 Doc. Number EP01-15-003 Code 0 Date 2015.03.18 Drafter Minyoung Jo Approver Taeyang Ha Title Product Specifications DUALi Inc. 5/9 3 Electric specifications 3.1 Power supply - Use USB power (5V 200mA) 3.2 Current consumption - Basic current consumption: 5V, 150mA under - Maximum current consumption: 5V, 200mA under (Reding or writing card) 3.3 USB communication specification - USB 2.0 FULL SPEED - Communication speed: Up to 12Mbps
Model Name BLP-A04-NR06 Doc. Number EP01-15-003 Code 0 Date 2015.03.18 Drafter Minyoung Jo Approver Taeyang Ha Title Product Specifications DUALi Inc. 6/9 4 Function specification 4.1 Card Reading - TYPE A Tag: Card reading should be available within up to 2.5 cm. There should be no dead zone - Once you tag the card on the reader, you can see that the LED of the reader gets brighter.
Model Name BLP-A04-NR06 Doc. Number EP01-15-003 Code 0 Date 2015.03.18 Drafter Minyoung Jo Approver Taeyang Ha Title Product Specifications DUALi Inc. 7/9 5 Environmental characteristic 5.1 Use environment. - Use temperature: 0 ~ 60 ℃ - Use humidity : 30 ~ 90 % (relative humidity) 5.2 Storage Environment - storage temperature: 0 ~ 60 ℃ - storage humidity : 30 ~ 90 % (relative humidity)
Model Name BLP-A04-NR06 Doc. Number EP01-15-003 Code 0 Date 2015.03.18 Drafter Minyoung Jo Approver Taeyang Ha Title Product Specifications DUALi Inc. 8/9 6 Caution z As equipment designed for indoor use, this unit should refrain from outdoor use in direct sunlight. z Basically this reader works only with USB. Connecting the reader directly to PC is recommended, rather than Using USB hub. z To maximize the card read range, make sure that there is no metallic material near the reader. If the device is opened or the antenna is out of the position, card reading range can be shortened or it’s not available to read the card.
Model Name BLP-A04-NR06 Doc. Number EP01-15-003 Code 0 Date 2015.03.18 Drafter Minyoung Jo Approver Taeyang Ha Title Product Specifications DUALi Inc. 9/9 7 Certification This product must be certified to KC, FCC and CE standard as a wireless communication device at a frequency of 13.56MHz
FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is con-nected. • Consult the dealer or an experienced radio/TV technician for help. Caution Modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Compliance Information : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation IMPORTANT NOTE: FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this equipment near water. 6) Do not using near any heat sources such as radiators, heat resisters, stove, or other equipment that produce heat. European CE notice to users and product statements This product is CE marked according to the provisions of the R&TTE Directive(99/5/EC). Hereby, DUALi Inc. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For further information, please contact http:// www.duali.com DUALi Inc. 864-3, Gwanyang-Dong, Anyang-si, Gyeonggi-Do, Korea Tel: +82-31-213-0074/ Fax: +82-31-213-0078/ e-mail: hotsunny@duali.com URL: http:// www.duali.com
EUROPEAN UNION “DECLARATION OF CONFORMITY” DECLARATION OF CONFORMITY DUALi Inc. 1-309 Innoplex, 306 Sinwon-ro, Yeongtong-gu, Suwon, Gyeonggi-do, Korea declare under our sole responsibility that the product(s) Smart Card Reader to which this declaration relate(s) is in conformance with the following standards: EN 301 489-1 V1.9.2 :2011 EN 301 489-3 V1.6.1 :2013 EN60950-1 :2006 EN 300 330-1 V1.8.1 :2014 EN 300 330-2 V1.6.1 :2014 following the provisions of the 1999/5/EC Directives.

Navigation menu